The thermal decomposition of the benzyl radical in a heated micro-reactor. I. Experimental findings

Thermal Decomposition of 2- and 4-Iodobenzyl Iodide Yields Fulvenallene and Ethynylcyclopentadienes: A Joint Threshold Photoelectron and Matrix Isolation Spectroscopic Study

The thermal decomposition of 2- and 4-iodobenzyl iodide at high temperatures was investigated by mass-selective threshold photoelectron spectroscopy (ms-TPES) in the gas phase, as well as by matrix isolation infrared spectroscopy in cryogenic matrices. Scission of the benzylic C-I bond in the precursors at 850 K affords 2- and 4-iodobenzyl radicals (ortho- and para-IC6H4CH2•), respectively, in high yields. The adiabatic ionization energies of ortho-IC6H4CH2• to the X̃+(1A') and ã+(3A') cation states were determined to be 7.31 ± 0.01 and 8.78 ± 0.01 eV, whereas those of para-IC6H4CH2• were measured to be 7.17 ± 0.01 eV for X̃+(1A1) and 8.98 ± 0.01 eV for ã+(3A1). Vibrational frequencies of the ring breathing mode were measured to be 560 ± 80 and 240 ± 80 cm-1 for the X̃+(1A') and ã+(3A') cation states of ortho-IC6H4CH2•, respectively. At higher temperatures, subsequent aryl C-I cleavage takes place to form α,2- and α,4-didehydrotoluene diradicals, which rapidly undergo ring contraction to a stable product, fulvenallene. Nevertheless, the most intense vibrational bands of the elusive α,2- and α,4-didehydrotoluene diradicals were observed in the Ar matrices. In addition, high-energy and astrochemically relevant C7H6 isomers 1-, 2-, and 5-ethynylcyclopentadiene are observed at even higher pyrolysis temperatures along with fulvenallene. Complementary quantum chemical computations on the C7H6 potential energy surface predict a feasible reaction cascade at high temperatures from the diradicals to fulvenallene, supporting the experimental observations in both the gas phase and cryogenic matrices.

Elucidating the toluene formation mechanism in the reaction of propargyl radical with 1,3-butadiene

Toluene is one of the simplest mono-substituted benzene derivatives and an important precursor to form polycyclic aromatic hydrocarbons (PAHs) and soot. However, there is a lack of critical understanding of the formation mechanisms of the toluene molecule. In this work, we explore high-temperature reactions of propargyl radical addition to 1,3-butadiene in a tubular flow microreactor. We obtain experimental evidence for the distinct formations of three C₇H₈ isomers consisting of toluene, 1,3,5-cycloheptatriene, and 5-methylene-1,3-cyclohexadiene discriminated by synchrotron VUV photoionization efficiency curves. Toluene is identified as the dominant product, which shows strong contrast with the calculated results of the system. By performing theoretical calculations and kinetic simulations, we found that 5-methylene-1,3-cyclohexadiene is a key product of the primary reaction, and toluene formation is enhanced by unavoidable secondary reactions, such as unimolecular isomerization and/or H-assisted isomerization reactions in the SiC microreactor. The current work provides competitive pathways for the enhanced formation of toluene, and may further help disentangle the toluene-promoted molecular growth mechanism of PAHs in combustion environments.

Comprehensive Kinetics on the C7H7 Potential Energy Surface under Combustion Conditions

The automated kinetics workflow code, KinBot, was used to explore and characterize the regions of the C₇H₇ potential energy surface that are relevant to combustion environments and especially soot inception. We first explored the lowest-energy region, which includes the benzyl, fulvenallene + H, and cyclopentadienyl + acetylene entry points. We then expanded the model to include two higher-energy entry points, vinylpropargyl + acetylene and vinylacetylene + propargyl. The automated search was able to uncover the pathways from the literature. In addition, three important new routes were discovered: a lower-energy pathway connecting benzyl with vinylcyclopentadienyl, a decomposition mechanism from benzyl that results in side-chain hydrogen atom loss to produce fulvenallene + H, and shorter and lower energy routes to the dimethylene-cyclopentenyl intermediates. We systematically reduced the extended model to a chemically relevant domain composed of 63 wells, 10 bimolecular products, 87 barriers, and 1 barrierless channel and constructed a master equation using the CCSD(T)-F12a/cc-pVTZ//ωB97X-D/6-311++G(d,p) level of theory to provide rate coefficients for chemical modeling. Our calculated rate coefficients show excellent agreement with measured ones. We also simulated concentration profiles and calculated branching fractions from the important entry points to provide an interpretation of this important chemical landscape.

Gas-Phase Infrared Spectra of the C7H5 Radical and Its Bimolecular Reaction Products

Resonance-stabilized radicals are considered as possible intermediates in the formation of polycyclic aromatic hydrocarbons (PAHs) in interstellar space. Here, we investigate the fulvenallenyl radical, the most stable C₇H₅ isomer by IR/UV ion dip spectroscopy employing free electron laser radiation in the mid-infrared region between 550 and 1750 cm^-1. The radical is generated by pyrolysis from phthalide. Various jet-cooled reaction products are identified by their mass-selective IR spectra in the fingerprint region, based on a comparison with computed spectra. Interestingly, benzyl is present as a second resonance-stabilized radical. It is connected to fulvenallenyl by a sequence of two H atom losses or additions. Among the identified aromatic hydrocarbons are toluene and styrene, as well as polycyclic molecules, such as indene, naphthalene, fluorene and phenanthrene. Mechanisms for the formation of PAH from C₇H₅ have already been suggested in previous computational work. In particular, the radical/radical reaction of two fulvenallenyl radicals provides an efficient route to phenanthrene in one bimolecular step and might be relevant for PAH formation under astrochemical conditions.

Optical Identification of the Resonance-Stabilized para-Ethynylbenzyl Radical

We report the spectroscopic observation of the jet-cooled para-ethynylbenzyl (PEB) radical, a resonance-stabilized isomer of C₉H₇. The radical was produced in a discharge of p-ethynyltoluene diluted in argon and probed by resonant two-color two-photon ionization (R2C2PI) spectroscopy. The origin of the D₀(²B₁)-D₁(²B₁) transition of PEB appears at 19,506 cm^-1. A resonant two-color ion-yield scan reveals an adiabatic ionization energy (AIE) of 7.177(1) eV, which is almost symmetrically bracketed by CBS-QB3 and B3LYP/6-311G++(d,p) calculations. The electronic spectrum exhibits pervasive Fermi resonances, in that most a₁ fundamentals are accompanied by similarly intense overtones or combination bands of non-totally symmetric modes that would carry little intensity in the harmonic approximation. Under the same experimental conditions, the m/z = 115 R2C2PI spectrum of the p-ethynyltoluene discharge also exhibits contributions from the m-ethynylbenzyl and 1-phenylpropargyl radicals. The former, like PEB, is observed herein for the first time, and its identity is confirmed by measurement and calculation of its AIE and D₀-D₁ origin transition energy; the latter is identified by comparison with its known electronic spectrum (J. Am. Chem. Soc., 2008, 130, 3137-3142). Both species are found to co-exist with PEB at levels vastly greater than might be explained by any precursor sample impurity, implying that interconversion of ethynylbenzyl motifs is feasible in energetic environments such as plasmas and flames, wherein resonance-stabilized radicals are persistent.

Experimental Observation of Hydrocarbon Growth by Resonance-Stabilized Radical-Radical Chain Reaction

Rapid molecular-weight growth of hydrocarbons occurs in flames, in industrial synthesis, and potentially in cold astrochemical environments. A variety of high- and low-temperature chemical mechanisms have been proposed and confirmed, but more facile pathways may be needed to explain observations. We provide laboratory confirmation in a controlled pyrolysis environment of a recently proposed mechanism, radical-radical chain reactions of resonance-stabilized species. The recombination reaction of phenyl (c-C₆ H₅ ) and benzyl (c-C₆ H₅ CH₂ ) radicals produces both diphenylmethane and diphenylmethyl radicals, the concentration of the latter increasing with rising temperature. A second phenyl addition to the product radical forms both triphenylmethane and triphenylmethyl radicals, confirming the propagation of radical-radical chain reactions under the experimental conditions of high temperature (1100-1600 K) and low pressure (ca. 3 kPa). Similar chain reactions may contribute to particle growth in flames, the interstellar medium, and industrial reactors.

Continuous Butadiyne Addition to Propargyl: A Radical-Efficient Pathway for Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs) play a crucial role in soot inception, interstellar evolution, and nanomaterial synthesis. Although several mechanisms, such as hydrogen-abstraction acetylene/vinylacetylene addition, have previously been proposed, PAH formation and growth are not yet fully understood. We propose an alternate PAH growth mechanism wherein propargyl radical reacts with butadiyne to form larger radicals containing newly fused aromatic rings. Butadiyne is an important intermediate in hydrocarbon oxidation and carbon rich stars, while propargyl is one of the most important resonantly stabilized radicals that persists for long times. Our proposed mechanism is validated by quantum chemical calculations, elementary reaction experiments, laminar flame analysis, and kinetic modeling. Our findings challenge the conventional wisdom that radical site regeneration, being central to PAH growth, requires sequential hydrogen elimination and/or abstraction. In our proposed mechanism, PAH growth does not depend on abundant free radical consumption, and could, therefore, help explain carbonaceous nanoparticle coalescence in radical-deficient reaction environments.

Electronic Spectroscopy of cis- and trans-meta-Vinylbenzyl Radicals

The D₀(²A″)-D₁(²A″) electronic transition of resonance-stabilized radical C₉H₉ isomers cis- and trans-meta-vinylbenzyl (MVB) has been investigated using resonant two-color two-photon ionization (R2C2PI) and laser-induced fluorescence. The radicals were produced in a discharge of m-vinyltoluene diluted in Ar and probed under jet-cooled conditions. The origin bands of the cis and trans conformers are at 19 037 and 18 939 cm^-1, respectively. Adiabatic ionization energies near 7.17 eV were determined for both conformers from two-color ion-yield scans. Dispersed fluorescence (DF) was used to conclusively identify the cis-conformer: ground-state cis-MVB eigenvalues calculated for a Fourier series fit of a computed vinyl torsion potential are in excellent agreement with torsional transitions in the 19 037 cm^-1 DF spectrum. R2C2PI features arising from cis- or trans-MVB were distinguished by optical-optical hole-burning spectroscopy and vibronic assignments were made with guidance from density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations. There is a notable absence of mirror symmetry between excitation and emission spectra for several totally symmetric modes, whereby modes that are conspicuous in emission are nearly absent in excitation, and vice versa. This effect is largely ascribed to interference between Franck-Condon and Herzberg-Teller contributions to the electronic transition moment, and its pervasiveness a consequence of the low symmetry (C_s) of the molecule, which permits intensity borrowing from several relatively bright electronic states of A″ symmetry.

Thermal Decomposition of Benzyl Radicals: Kinetics and Spectroscopy in a Shock Tube

Understanding the mechanism of high-temperature reactions of aromatic hydrocarbons and radicals is essential for the modeling of hydrocarbon growth processes in combustion environments. In this study, the thermal decomposition reaction of benzyl radicals was investigated using time-resolved broadband cavity-enhanced absorption spectroscopy behind reflected shock waves at a postshock pressure of 100 kPa and temperatures of 1530, 1630, and 1740 K. The transient absorption spectra during the decomposition were recorded over the spectral range of 282-410 nm. The spectra were contributed by the absorption of benzyl radicals and some transient and residual absorbing species. The temporal behavior of the absorption was analyzed using a kinetic model to determine the rate constant for benzyl decomposition. The obtained rate constants can be represented by the Arrhenius expression k₁ = 1.1 × 10¹² exp(-30 500 K/T) s^-1 with an estimated logarithmic uncertainty of Δlog₁₀ k = ±0.2. Kinetic simulation of the secondary reactions indicated that fulvenallenyl radicals are potentially responsible for the transient absorption that appeared around 400 nm. This assignment is consistent with the available spectroscopic information of this radical. Possible candidates for the residual absorbing species are presented, suggesting the potential importance of ortho-benzyne as a reactive intermediate.

Decomposition of Picolyl Radicals at High Temperature: A Mass Selective Threshold Photoelectron Spectroscopy Study

The reaction products of the picolyl radicals at high temperature were characterized by mass-selective threshold photoelectron spectroscopy in the gas phase. Aminomethylpyridines were pyrolyzed to initially produce picolyl radicals (m/z=92). At higher temperatures further thermal reaction products are generated in the pyrolysis reactor. All compounds were identified by mass-selected threshold photoelectron spectroscopy and several hitherto unexplored reactive molecules were characterized. The mechanism for several dissociation pathways was outlined in computations. The spectrum of m/z=91, resulting from hydrogen loss of picolyl, shows four isomers, two ethynyl pyrroles with adiabatic ionization energies (IEad ) of 7.99 eV (2-ethynyl-1H-pyrrole) and 8.12 eV (3-ethynyl-1H-pyrrole), and two cyclopentadiene carbonitriles with IE's of 9.14 eV (cyclopenta-1,3-diene-1-carbonitrile) and 9.25 eV (cyclopenta-1,4-diene-1-carbonitrile). A second consecutive hydrogen loss forms the cyanocyclopentadienyl radical with IE's of 9.07 eV (T0 ) and 9.21 eV (S1 ). This compound dissociates further to acetylene and the cyanopropynyl radical (IE=9.35 eV). Furthermore, the cyclopentadienyl radical, penta-1,3-diyne, cyclopentadiene and propargyl were identified in the spectra. Computations indicate that dissociation of picolyl proceeds initially via a resonance-stabilized seven-membered ring.

A combined photoionization time-of-flight mass spectrometry and laser absorption spectrometry flash photolysis apparatus for simultaneous determination of reaction rates and product branching

In recent years, predictions of product branching for reactions of consequence to both combustion and atmospheric chemistry have outpaced validating experiments. An apparatus is described that aims to fill this void by combining several well-known experimental techniques into one: flash photolysis for radical generation, multiple-pass laser absorption spectrometry (LAS) for overall kinetics measurements, and time-resolved photoionization time-of-flight mass spectrometry (PI TOF-MS) for product branching quantification. The sensitivity of both the LAS and PI TOF-MS detection techniques is shown to be suitable for experiments with initial photolytically generated radical concentrations of ∼1 × 10¹² molecules cm^-3. As it is fast (μs time resolution) and non-intrusive, LAS is preferred for accurate kinetics (time-dependence) measurements. By contrast, PI TOF-MS is preferred for product quantification because it provides a near-complete picture of the reactor composition in a single mass spectrum. The value of simultaneous LAS and PI TOF-MS detection is demonstrated for the chemically interesting phenyl radical + propene system.

Dimerization of the Benzyl Radical in a High-Temperature Pyrolysis Reactor Investigated by IR/UV Ion Dip Spectroscopy

We investigate the self-reaction of benzyl, C₇ H₇ , in a high-temperature pyrolysis reactor. The work is motivated by the observation that resonance-stabilized benzyl radicals can accumulate in reactive environments and contribute to the formation of polycyclic aromatic hydrocarbons (PAHs) and soot. Reaction products are detected by IR/UV ion dip spectroscopy, using infrared radiation from the free electron laser FELIX, and are identified by comparison with computed spectra. Among the reaction products identified by their IR absorption are several PAHs linked to toluene combustion such as bibenzyl, phenanthrene, diphenylmethane, and fluorene. The identification of 9,10-dihydrophenanthrene provides evidence for a mechanism of phenanthrene formation from bibenzyl that proceeds by initial cyclization rather than an initial hydrogen loss to stilbene.

Thermal Decomposition Mechanism for Ethanethiol

The thermal decomposition of ethanethiol was studied using a 1 mm × 2 cm pulsed silicon carbide microtubular reactor, CH₃CH₂SH + Δ → Products. Unlike previous studies these experiments were able to identify the initial ethanethiol decomposition products. Ethanethiol was entrained in either an Ar or a He carrier gas, passed through a heated (300-1700 K) SiC microtubular reactor (roughly ≤100 μs residence time) and exited into a vacuum chamber. Within one reactor diameter the gas cools to less than 50 K rotationally, and all reactions cease. The resultant molecular beam was probed by photoionization mass spectroscopy and IR spectroscopy. Ethanethiol was found to undergo unimolecular decomposition by three pathways: CH₃CH₂SH → (1) CH₃CH₂ + SH, (2) CH₃ + H₂C═S, and (3) H₂C═CH₂ + H₂S. The experimental findings are in good agreement with electronic structure calculations.

Thermal Decomposition of Potential Ester Biofuels. Part I: Methyl Acetate and Methyl Butanoate

Two methyl esters were examined as models for the pyrolysis of biofuels. Dilute samples (0.06-0.13%) of methyl acetate (CH₃COOCH₃) and methyl butanoate (CH₃CH₂CH₂COOCH₃) were entrained in (He, Ar) carrier gas and decomposed in a set of flash-pyrolysis microreactors. The pyrolysis products resulting from the methyl esters were detected and identified by vacuum ultraviolet photoionization mass spectrometry. Complementary product identification was provided by matrix infrared absorption spectroscopy. Pyrolysis pressures in the pulsed microreactor were about 20 Torr and residence times through the reactors were roughly 25-150 μs. Reactor temperatures of 300-1600 K were explored. Decomposition of CH₃COOCH₃ commences at 1000 K, and the initial products are (CH₂═C═O and CH₃OH). As the microreactor is heated to 1300 K, a mixture of CH₂═C═O and CH₃OH, CH₃, CH₂═O, H, CO, and CO₂ appears. The thermal cracking of CH₃CH₂CH₂COOCH₃ begins at 800 K with the formation of CH₃CH₂CH═C═O and CH₃OH. By 1300 K, the pyrolysis of methyl butanoate yields a complex mixture of CH₃CH₂CH═C═O, CH₃OH, CH₃, CH₂═O, CO, CO₂, CH₃CH═CH₂, CH₂CHCH₂, CH₂═C═CH₂, HCCCH₂, CH₂═C═C═O, CH₂═CH₂, HC≡CH, and CH₂═C═O. On the basis of the results from the thermal cracking of methyl acetate and methyl butanoate, we predict several important decomposition channels for the pyrolysis of fatty acid methyl esters, R-CH₂-COOCH₃. The lowest-energy fragmentation will be a 4-center elimination of methanol to form the ketene RCH═C═O. At higher temperatures, concerted fragmentation to radicals will ensue to produce a mixture of species: (RCH₂ + CO₂ + CH₃) and (RCH₂ + CO + CH₂═O + H). Thermal cracking of the β C-C bond of the methyl ester will generate the radicals (R and H) as well as CH₂═C═O + CH₂═O. The thermochemistry of methyl acetate and its fragmentation products were obtained via the Active Thermochemical Tables (ATcT) approach, resulting in Δ_fH₂₉₈(CH₃COOCH₃) = -98.7 ± 0.2 kcal mol^-1, Δ_fH₂₉₈(CH₃CO₂) = -45.7 ± 0.3 kcal mol^-1, and Δ_fH₂₉₈(COOCH₃) = -38.3 ± 0.4 kcal mol^-1.

An optically accessible pyrolysis microreactor

We report an optically accessible pyrolysis micro-reactor suitable for in situ laser spectroscopic measurements. A radiative heating design allows for completely unobstructed views of the micro-reactor along two axes. The maximum temperature demonstrated here is only 1300 K (as opposed to 1700 K for the usual SiC micro-reactor) because of the melting point of fused silica, but alternative transparent materials will allow for higher temperatures. Laser induced fluorescence measurements on nitric oxide are presented as a proof of principle for spectroscopic characterization of pyrolysis conditions.

Kinetics of the OH Radical Reaction with Fulvenallene from 298 to 450 K

Self-recombination and cross-reactions of large resonant stabilized hydrocarbon radicals such as fulvenallenyl (C7H5) are predicted to form polycyclic aromatic hydrocarbons in combustion and the interstellar medium. Although fulvenallenyl is likely to be present in these environments, large uncertainties remain about its formation mechanisms. We have investigated the formation of fulvenallenyl by reacting the OH radical with fulvenallene (C7H6) over the 298 to 450 K temperature range and at a pressure of 5 Torr (667 Pa). The reaction rate coefficient is found to be 8.8(±1.7) × 10(-12) cm(3) s(-1) at room temperature with a negative temperature dependence that can be fit from 298 to 450 K to k(T) = 8.8(±1.7) × 10(-12) (T/298 K)(-6.6(±1.1)) exp[-(8.72(±3.03) kJ mol(-1))/(R((1/T) - (1/298 K)))] cm(3) s(-1). The comparison of the experimental data with calculated abstraction rate coefficients suggests that over the experimental temperature range, association of the OH radical to fulvenallene plays a significant role likely leading to a low fulvenallenyl branching fraction.

Time- and Isomer-Resolved Measurements of Sequential Addition of Acetylene to the Propargyl Radical

Soot formation in combustion is a complex process in which polycyclic aromatic hydrocarbons (PAHs) are believed to play a critical role. Recent works concluded that three consecutive additions of acetylene (C2H2) to propargyl (C3H3) create a facile route to the PAH indene (C9H8). However, the isomeric forms of C5H5 and C7H7 intermediates in this reaction sequence are not known. We directly investigate these intermediates using time- and isomer-resolved experiments. Both the resonance stabilized vinylpropargyl (vp-C5H5) and 2,4-cyclopentadienyl (c-C5H5) radical isomers of C5H5 are produced, with substantially different intensities at 800 K vs 1000 K. In agreement with literature master equation calculations, we find that c-C5H5 + C2H2 produces only the tropyl isomer of C7H7 (tp-C7H7) below 1000 K, and that tp-C7H7 + C2H2 terminates the reaction sequence yielding C9H8 (indene) + H. This work demonstrates a pathway for PAH formation that does not proceed through benzene.

Formation of polycyclic aromatic hydrocarbons from bimolecular reactions of phenyl radicals at high temperatures

The self-reaction of the phenyl radical is one of the key reactions in combustion chemistry.