Micro-nanoparticles magnetic trap: Toward high sensitivity and rapid microfluidic continuous flow enzyme immunoassay

Development of Phantoms for Multimodal Magnetic Resonance Imaging and Magnetic Particle Imaging

Phantoms are crucial for the development of imaging techniques based on magnetic nanoparticles (MNP). They serve as test objects to simulate application scenarios but are also used for quality assurance and interlaboratory comparisons. Magnetic particle imaging (MPI) is excellent for specifically detecting magnetic nanoparticles (MNP) without any background signals. To obtain information about the surrounding soft tissue, MPI is often used in combination with magnetic resonance imaging (MRI). For such application scenarios, this poses a challenge for phantom fabrication, as they need to accommodate MNP as well as provide MR visibility. Recently, layer-by-layer fabrication of parts using Additive Manufacturing (AM) has emerged as a powerful tool for creating complex and patient-specific phantoms, but these are characterized by poor MR visibility of the AM material. We present the systematic screening of AM materials as candidates for multimodal MRI/MPI imaging. Of all investigated materials, silicone (Dreve, Biotec) exhibited the best properties with sufficient MR-signal performance and the lowest absorption of MNP at the interface of AM materials. With the help of AM and the selection of appropriate materials, we have been able to produce suitable MRI/MPI phantoms.

Optofluidic Particle Manipulation: Optical Trapping in a Thin-Membrane Microchannel

We demonstrate an optofluidic device which utilizes the optical scattering and gradient forces for particle trapping in microchannels featuring 300 nm thick membranes. On-chip waveguides are used to direct light into microfluidic trapping channels. Radiation pressure is used to push particles into a protrusion cavity, isolating the particles from liquid flow. Two different designs are presented: the first exclusively uses the optical scattering force for particle manipulation, and the second uses both scattering and gradient forces. Trapping performance is modeled for both cases. The first design, referred to as the orthogonal force design, is shown to have a 80% capture efficiency under typical operating conditions. The second design, referred to as the gradient force design, is shown to have 98% efficiency under the same conditions.

Capture efficiency of magnetic nanoparticles through the compaction effect of a microparticles column

When a magnetic nanoparticle solution flows through a porous medium formed by iron microparticles packed in a microfluidic channel, the nanoparticles get trapped within the column in the presence of a magnet. A complex interplay between magnetic and fluid forces within the magnetized porous medium governs the trapping of nanoparticles. However, how does the packing state of the microparticles affect the trapping of nanoparticles? Will more nanoparticles be trapped on a loose or a tight packing? In this work, we present experiments that show that the capture of nanoparticles is determined by the total volume occupied by the column, independent of its packing density. We present a simple analytical model based on the competition of drag and magnetic forces that shows that our system can be useful to develop and test more complete and accurate models. We also developed a technique to measure the columns' minute mass and its packing density, which consists of injecting polydimethylsiloxane into the acrylic microfluidic device. Our work can help with the optimization of environmental and biomedical applications based on high-gradient magnetic nanoparticle separation.

Magnetic nanoparticles in microfluidics-based diagnostics: an appraisal

The use of magnetic nanoparticles (MNPs) in microfluidics based diagnostics is a classic case of micro-, nano- and bio-technology coming together to design extremely controllable, reproducible, and scalable nano and micro 'on-chip bio sensing systems.' In this review, applications of MNPs in microfluidics ranging from molecular diagnostics and immunodiagnostics to clinical uses have been examined. In addition, microfluidic mixing and capture of analytes using MNPs, and MNPs as carriers in microfluidic devices has been investigated. Finally, the challenges and future directions of this upcoming field have been summarized. The use of MNP-based microfluidic devices, will help in developing decentralized or 'point of care' testing globally, contributing to affordable healthcare, particularly, for middle- and low-income developing countries.

An affordable 3D-printed positioner fixture improves the resolution of conventional milling for easy prototyping of acrylic microfluidic devices

We present a simple and low-cost positioner fixture to improve the fabrication resolution of acrylic microchannels using conventional milling machines. The positioner fixture is a mechatronic platform that consists of three piezoelectric actuators assembled in a housing made of 3D printer parts. The upper part of the housing is raised by the simultaneous actuation of the piezoelectric elements and by the deformation of 3D-printed hinge-shaped supports. The vertical positioning (Z-axis) can be controlled with a resolution of 500 nm and an accuracy of ±1.5 μm; in contrast, conventional milling machines can achieve resolutions of 10 to 35 μm. Through simulations, we found that 3D-printed hinges can deform to reach heights up to 27 μm without suffering any mechanical or structural damage. To demonstrate the capabilities of our fixture, we fabricated microfluidic devices with three weir filters that selectively capture microbeads of 3, 6 and 10 μm. We used a similar weir filter design to implement a bead-based immunoassay. Our positioner fixture increases the resolution of conventional milling machines, thus enabling the fast and easy fabrication of thermoplastic fluidic devices that require finer microstructures in their design.