Operando Raman spectroscopy tracks oxidation-state changes in an amorphous Co oxide material for electrocatalysis of the oxygen evolution reaction

Lattice Oxygen Activation through Deep Oxidation of Co4N by Jahn-Teller-Active Dopants for Improved Electrocatalytic Oxygen Evolution

Triggering the lattice oxygen oxidation mechanism is crucial for improving oxygen evolution reaction (OER) performance, because it could bypass the scaling relation limitation associated with the conventional adsorbate evolution mechanism through the direct formation of oxygen-oxygen bond. High-valence transition metal sites are favorable for activating the lattice oxygen, but the deep oxidation of pre-catalysts suffers from a high thermodynamic barrier. Here, taking advantage of the Jahn-Teller (J-T) distortion induced structural instability, we incorporate high-spin Mn3+ (t 2 g 3 e g 1 ${{t}_{2g}^{3}{e}_{g}^{1}}$ ) dopant into Co4N. Mn dopants enable a surface structural transformation from Co4N to CoOOH, and finally to CoO2, as observed by various in situ spectroscopic investigations. Furthermore, the reconstructed surface on Mn-doped Co4N triggers the lattice oxygen activation, as evidenced experimentally by pH-dependent OER, tetramethylammonium cation adsorption and online electrochemical mass spectrometry measurements of 18O-labelled catalysts. In general, this work not only offers the introducing J-T effect approach to regulate the structural transition, but also provides an understanding about the influence of the catalyst's electronic configuration on determining the reaction route, which may inspire the design of more efficient catalysts with activated lattice oxygen.

Translating the Optimized Durability of Co-Based Anode Catalyst into Sustainable Anion Exchange Membrane Water Electrolysis

Development of robust electrocatalysts for the oxygen evolution reaction (OER) underpins the efficient production of green hydrogen via anion exchange membrane water electrolysis (AEMWE). This study elucidates the factors contributing to the degradation of cobalt-based (Co-based) OER catalysts synthesized via electrodeposition, thus establishing strategic approaches to enhance their longevity. Systematic variations in the electroplating process and subsequent heat treatment reveal a delicate balance between catalytic activity and durability, substantiated by comprehensive electrochemical assessments and material analyses. Building upon these findings, the Co-based anode is successfully optimized in the AEMWE single-cell configuration, showcasing an average degradation rate of 0.07 mV h-1 over a continuous operation for 1500 h at a current density of 1 A cm-2.

Shape-Preserved CoFeNi-MOF/NF Exhibiting Superior Performance for Overall Water Splitting across Alkaline and Neutral Conditions

This study reported a multi-functional Co0.45Fe0.45Ni0.9-MOF/NF catalyst for oxygen evolution reaction (OER), hydrogen evolution reaction (HER), and overall water splitting, which was synthesized via a novel shape-preserving two-step hydrothermal method. The resulting bowknot flake structure on NF enhanced the exposure of active sites, fostering a superior electrocatalytic surface, and the synergistic effect between Co, Fe, and Ni enhanced the catalytic activity of the active site. In an alkaline environment, the catalyst exhibited impressive overpotentials of 244 mV and 287 mV at current densities of 50 mA cm-2 and 100 mA cm-2, respectively. Transitioning to a neutral environment, an overpotential of 505 mV at a current density of 10 mA cm-2 was achieved with the same catalyst, showing a superior property compared to similar catalysts. Furthermore, it was demonstrated that Co0.45Fe0.45Ni0.9-MOF/NF shows versatility as a bifunctional catalyst, excelling in both OER and HER, as well as overall water splitting. The innovative shape-preserving synthesis method presented in this study offers a facile method to develop an efficient electrocatalyst for OER under both alkaline and neutral conditions, which makes it a promising catalyst for hydrogen production by water splitting.

Co and Co3O4 in the Hydrolysis of Boron-Containing Hydrides: H2O Activation on the Metal and Oxide Active Centers

This work focuses on the comparison of H2 evolution in the hydrolysis of boron-containing hydrides (NaBH4, NH3BH3, and (CH2NH2BH3)2) over the Co metal catalyst and the Co3O4-based catalysts. The Co3O4 catalysts were activated in the reaction medium, and a small amount of CuO was added to activate Co3O4 under the action of weaker reducers (NH3BH3, (CH2NH2BH3)2). The high activity of Co3O4 has been previously associated with its reduced states (nanosized CoBn). The performed DFT modeling shows that activating water on the metal-like surface requires overcoming a higher energy barrier compared to hydride activation. The novelty of this study lies in its focus on understanding the impact of the remaining cobalt oxide phase. The XRD, TPR H2, TEM, Raman, and ATR FTIR confirm the formation of oxygen vacancies in the Co3O4 structure in the reaction medium, which increases the amount of adsorbed water. The kinetic isotopic effect measurements in D2O, as well as DFT modeling, reveal differences in water activation between Co and Co3O4-based catalysts. It can be assumed that the oxide phase serves not only as a precursor and support for the reduced nanosized cobalt active component but also as a key catalyst component that improves water activation.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Electrode/Electrolyte Synergy for Concerted Promotion of Electron and Proton Transfers toward Efficient Neutral Water Oxidation

Neutral water oxidation is a crucial half-reaction for various electrochemical applications requiring pH-benign conditions. However, its sluggish kinetics with limited proton and electron transfer rates greatly impacts the overall energy efficiency. In this work, we created an electrode/electrolyte synergy strategy for simultaneously enhancing the proton and electron transfers at the interface toward highly efficient neutral water oxidation. The charge transfer was accelerated between the iridium oxide and in situ formed nickel oxyhydroxide on the electrode end. The proton transfer was expedited by the compact borate environment that originated from hierarchical fluoride/borate anions on the electrolyte end. These concerted promotions facilitated the proton-coupled electron transfer (PCET) events. Due to the electrode/electrolyte synergy, Ir-O and Ir-OO- intermediates could be directly detected by in situ Raman spectroscopy, and the rate-limiting step of Ir-O oxidation was determined. This synergy strategy can extend the scope of optimizing electrocatalytic activities toward more electrode/electrolyte combinations.

Reconstruction of CoNx /NC Catalyst during Oxygen Evolution Reaction by Fe3+ Modulation for Enhanced Activity and Stability

The surface reconstruction of transition metal-based catalysts has been demonstrated to be beneficial for oxygen evolution reaction (OER). However, regulating the activity and stability of the components derived from reconstruction is challenging. Here, a strategy of Fe3+ ion modulating the reconstruction components of CoN0.4 on a nitrogen-doped carbon carrier(CoN0.4 /NC) electrocatalyst for promoted OER activity and stability is reported. During the OER process, the cobalt nitride components on the surface of CoN0.4 /NC catalyst were converted into CoOOH and Co4+ species. The addition of Fe3+ stabilized the CoOOH phase and facilitated the formation of Fe-CoOOH active phase, enhancing the activity and stability of CoN0.4 /NC. The Fe10 -CoN0.4 /NC catalyst achieved a current density of 10 mA cm-2 at a low overpotential of 300 mV (vs. RHE) with a Tafel slope of 68.12 mV dec-1 . The overpotential of Fe10 -CoN0.4 /NC was 122 mV lower than that of the CoN0.4 /NC catalyst and was comparable to commercial RuO2 catalyst. This study develops a novel technology for regulating the production of reconstructed species using Fe3+ ions.

Pulsed Light Synthesis of High Entropy Nanocatalysts with Enhanced Catalytic Activity and Prolonged Stability for Oxygen Evolution Reaction

The ability to synthesize compositionally complex nanostructures rapidly is a key to high-throughput functional materials discovery. In addition to being time-consuming, a majority of conventional materials synthesis processes closely follow thermodynamics equilibria, which limit the discovery of new classes of metastable phases such as high entropy oxides (HEO). Herein, a photonic flash synthesis of HEO nanoparticles at timescales of milliseconds is demonstrated. By leveraging the abrupt heating and cooling cycles induced by a high-power-density xenon pulsed light, mixed transition metal salt precursors undergo rapid chemical transformations. Hence, nanoparticles form within milliseconds with a strong affinity to bind to the carbon substrate. Oxygen evolution reaction (OER) activity measurements of the synthesized nanoparticles demonstrate two orders of magnitude prolonged stability at high current densities, without noticeable decay in performance, compared to commercial IrO₂ catalyst. This superior catalytic activity originates from the synergistic effect of different alloying elements mixed at a high entropic state. It is found that Cr addition influences surface activity the most by promoting higher oxidation states, favoring optimal interaction with OER intermediates. The proposed high-throughput method opens new pathways toward developing next-generation functional materials for various electronics, sensing, and environmental applications, in addition to renewable energy conversion.

Kinetic-enhanced carbon fiber for rechargeable zinc-air batteries

Metal-free catalysts are made by the elements with infinite reserve in nature and, therefore, show the potential for large-scale applications in energy devices including metal-air batteries. The construction of metal-air batteries prefers using self-supporting catalysts with favorable activity as well as fast kinetics. However, it is challenging due to the limited electropositivity of metal-free catalysts for O-O bond formation in oxygen evolution reaction (OER), scaling relationship restrictions between OER and oxygen reduction reaction, and difficulty in porosity construction on the monolith electrode surface. In this contribution, through developing a facile methodology of quenching high-temperature carbon clothes in liquid nitrogen, a self-supported carbon cloth with bifunctional active graphene skin and fast kinetics is well constructed to serve as the air cathode in metal-air batteries. Regulated oxygen species and three-dimensionally hierarchical porosity are well constructed on the carbon fiber surfaces, contributing high intrinsic activity and prominently enhanced kinetics, which leads to favorable performances in aqueous as well as flexible rechargeable zinc-air batteries. The work proposed a promising strategy in the rational design and smart synthesis of fast-kinetic monolith electrodes, which refreshes concepts and strategies of advanced material fabrication, and also bridges material science and practical energy devices.

Identifying the geometric catalytic active sites of crystalline cobalt oxyhydroxides for oxygen evolution reaction

Unraveling the precise location and nature of active sites is of paramount significance for the understanding of the catalytic mechanism and the rational design of efficient electrocatalysts. Here, we use well-defined crystalline cobalt oxyhydroxides CoOOH nanorods and nanosheets as model catalysts to investigate the geometric catalytic active sites. The morphology-dependent analysis reveals a ~50 times higher specific activity of CoOOH nanorods than that of CoOOH nanosheets. Furthermore, we disclose a linear correlation of catalytic activities with their lateral surface areas, suggesting that the active sites are exclusively located at lateral facets rather than basal facets. Theoretical calculations show that the coordinatively unsaturated cobalt sites of lateral facets upshift the O 2p-band center closer to the Fermi level, thereby enhancing the covalency of Co-O bonds to yield the reactivity. This work elucidates the geometrical catalytic active sites and enlightens the design strategy of surface engineering for efficient OER catalysts.

While cobalt-based electrocatalysts demonstrate promising performances for oxygen evolution, active site identification is complicated by concurrent structural changes. Here, authors examine crystalline, well-defined cobalt oxyhydroxide nanomaterials and identify the geometric active sites.

Surface Boron Modulation on Cobalt Oxide Nanocrystals for Electrochemical Oxygen Evolution Reaction

Herein, we show that coupling boron with cobalt oxide tunes its structure and significantly boost its electrocatalytic performance for the oxygen evolution reaction (OER). Through a simple precipitation and thermal treatment process, a series of Co-B oxides with tunable morphologies and textural parameters were prepared. Detailed structural analysis supported first the formation of an disordered and partially amorphous material with nanosized Co₃ BO₅ and/or Co₂ B₂ O₆ being present on the local atomic scale. The boron modulation resulted in a superior OER reactivity by delivering a large current and an overpotential of 338 mV to reach a current density of 10 mA cm^-2 in 1 M KOH electrolyte. Identical location transmission electron microscopy and in situ electrochemical Raman spectroscopy studies revealed alteration and surface re-construction of materials, and formation of CoO₂ and (oxy)hydroxide intermediate, which were found to be highly dependent on crystallinity of the samples.

Electrolyte Engineering for Oxygen Evolution Reaction Over Non-Noble Metal Electrodes Achieving High Current Density in the Presence of Chloride Ion

Direct seawater electrolysis potentially simplifies the electrolysis process and leads to a decrease in the cost of green hydrogen production. However, impurities present in the seawater, especially chloride ions (Cl^- ), cause corrosion of the electrode material, and its oxidation competes with the anodic oxygen evolution reaction (OER). By carefully tuning electrode substrate and electrolyte solutions, the CoFeO_x H_y /Ti electrode with high double-layer capacitance actively and stably electro-catalyzed the OER in potassium borate solutions at pH 9.2 in the presence of 0.5 mol kg^-1 Cl^- . The electrode possesses an active site motif composed of either a Co- or Fe-domain and benefits from an enlarged surface area. Selective OER was demonstrated in Cl^- -containing electrolyte solutions at an elevated reaction temperature, stably achieving 500 mA cm^-2 at a mere potential of 1.67 V vs. reversible hydrogen electrode (RHE) at 353 K for multiple on-off and long-term testing processes with a faradaic efficiency of unity toward the OER.

Time-Resolved Vibrational and Electronic Spectroscopy for Understanding How Charges Drive Metal Oxide Catalysts for Water Oxidation

Temporally resolved spectroscopy is a powerful approach for gaining detailed mechanistic understanding of water oxidation at robust Earth-abundant metal oxide catalysts for guiding efficiency improvement of solar fuel conversion systems. Beyond detecting and structurally identifying surface intermediates by vibrational and accompanying optical spectroscopy, knowledge of how charges, sequentially delivered to the metal oxide surface, drive the four-electron water oxidation cycle is critical for enhancing catalytic efficiency. Key issues addressed in this Perspective are the experimental requirements for establishing the kinetic relevancy of observed surface species and the discovery of the rate-boosting role of encounters of two or more one-electron surface hole charges, often in the form of randomly hopping metal oxo or oxyl moieties, for accessing very low-barrier O-O bond-forming pathways. Recent spectroscopic breakthroughs of metal oxide photo- and electrocatalysts inspire future research poised to take advantage of new highly sensitive spectroscopic tools and of methods for fast catalysis triggering.

Triple Conductive Wiring by Electron Doping, Chelation Coating and Electrochemical Conversion in Fluffy Nb2 O5 Anodes for Fast-Charging Li-Ion Batteries

High-rate anode material is the kernel of developing fast-charging lithium ion batteries (LIBs). T-Nb₂ O₅ , well-known for its "room and pillar" structure and bulk pseudocapacitive effect, is expected to enable the fast lithium (de)intercalation. But this property is still limited by the low electronic conductivity or insufficient wiring manner. Herein, a strategy of triple conductive wiring through electron doping, chelation coating, and electrochemical conversion inside the microsized porous spheres consisting of dendrite-like T-Nb₂ O₅ primary particles is proposed to achieve the fast-charging and durable anodes for LIBs. The penetrative implanting of conformal carbon coating (derivative from polydopamine chelate) and NbO domains (induced by excess discharging) reinforces the global supply of electronically conductive wires, apart from those from Co/Mn heteroatom or O vacancy doping. The polydopamine etching on T-Nb₂ O₅ spheres promotes their evolution into fluffy morphology with better electrolyte infiltration. The synergic electron and ion wiring at different scales endow the modified T-Nb₂ O₅ anode with ultralong cycling life (143 mAh g^-1 at 1 A g^-1 after 8500 cycles) and high-rate performance (144.1 mAh g^-1 at 10.0 A g^-1 ). The permeation of multiple electron wires also enables a high mass loading of T-Nb₂ O₅ (4.5 mg cm^-2 ) with a high areal capacity of 0.668 mAh cm^-2 even after 150 cycles.

Phase Segregation in Cobalt Iron Oxide Nanowires toward Enhanced Oxygen Evolution Reaction Activity

The impact of reduction post-treatment and phase segregation of cobalt iron oxide nanowires on their electrochemical oxygen evolution reaction (OER) activity is investigated. A series of cobalt iron oxide spinel nanowires are prepared via the nanocasting route using ordered mesoporous silica as a hard template. The replicated oxides are selectively reduced through a mild reduction that results in phase transformation as well as the formation of grain boundaries. The detailed structural analyses, including the ⁵⁷Fe isotope-enriched Mössbauer study, validated the formation of iron oxide clusters supported by ordered mesoporous CoO nanowires after the reduction process. This affects the OER activity significantly, whereby the overpotential at 10 mA/cm² decreases from 378 to 339 mV and the current density at 1.7 V vs RHE increases by twofold from 150 to 315 mA/cm². In situ Raman microscopy revealed that the surfaces of reduced CoO were oxidized to cobalt with a higher oxidation state upon solvation in the KOH electrolyte. The implementation of external potential bias led to the formation of an oxyhydroxide intermediate and a disordered-spinel phase. The interactions of iron clusters with cobalt oxide at the phase boundaries were found to be beneficial to enhance the charge transfer of the cobalt oxide and boost the overall OER activity by reaching a Faradaic efficiency of up to 96%. All in all, the post-reduction and phase segregation of cobalt iron oxide play an important role as a precatalyst for the OER.

Towards time resolved characterization of electrochemical reactions: electrochemically-induced Raman spectroscopy

Structural characterization of transient electrochemical species in the sub-millisecond time scale is the all-time wish of any electrochemist. Presently, common time resolution of structural spectro-electrochemical methods is about 0.1 seconds. Herein, a transient spectro-electrochemical Raman setup of easy implementation is described which allows sub-ms time resolution. The technique studies electrochemical processes by initiating the reaction with an electric potential (or current) pulse and analyses the product with a synchronized laser pulse of the modified Raman spectrometer. The approach was validated by studying a known redox driven isomerization of a Ru-based molecular switch grafted, as monolayer, on a SERS active Au microelectrode. Density-functional-theory calculations confirmed the spectral assignments to sub-ms transient species. This study paves the way to a new generation of time-resolved spectro-electrochemical techniques which will be of fundamental help in the development of next generation electrolizers, fuel cells and batteries.

Structural characterization of transient electrochemical species in the sub-millisecond time scale is the all-time wish of any electrochemist.

Homogeneous or heterogeneous electrocatalysis: reinvestigation of a cobalt coordination compound for water oxidation

A cobalt coordination compound with azo-ligand linkers combined with linked bisulfonate moieties has been argued to be an efficient catalyst for the oxygen-evolution reaction (OER) (H.-T. Shi, X.-X. Li, F.-H. Wu and W.-B. Yu, Dalton Trans., 2017, 46, 16321.). In the previously published report, this cobalt compound (compound 1) was believed to display a high turnover frequency (5 s^-1) at η = 720 mV at pH 9. Herein, the OER in the presence of compound 1 is reinvestigated. The nanosized oxide-based particles formed after the OER in the presence of compound 1 were tracked by electrochemical methods, scanning electron microscopy (SEM), energy dispersive spectrometry (EDX), X-ray diffraction studies (XRD), (High-resolution) transmission electron microscopy ((HR)TEM), Raman spectroscopy, X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). Based on these experiments, it is proposed that a candidate for the true catalyst of the OER in the presence of compound 1 is cobalt oxide. During the OER and using chronoamperometry, the oxidation state of Co ions for the formed Co oxide is (III), but after consecutive CVs the oxidation states of Co ions for the formed Co oxide are (II) and (III). The results shed new light on the role of Co oxide nanoparticles formed in the presence of this Co coordination compound during the OER. Our experimental data also show that for the OER in the presence of a homogeneous (pre)catalyst, careful analyses to find the role of metal oxides are necessary for informed progress. The present findings also might help to find the mechanism of the OER in the presence of coordination compounds.

SmCo5 with a Reconstructed Oxyhydroxide Surface for Spin-Selective Water Oxidation at Elevated Temperature

The efficiency of electrolytic hydrogen production is limited by the slow reaction kinetics of oxygen evolution reaction (OER). Surface-reconstructed ferromagnetic (FM) catalysts with a spin-pinning effect at the FM/oxyhydroxide interface could enhance the spin-dependent OER kinetics. However, in real-life applications, electrolyzers are operated at elevated temperature, which may disrupt the spin orientations of FM catalysts and limit their performance. In this study, we prepared surface-reconstructed SmCo₅ /CoO_x H_y , which possesses polarized spins at the FM/oxyhydroxide interface that lead to excellent OER activity. These interfacial polarized spins could be further aligned through a magnetization process, which further enhanced the OER performance. Moreover, the operation temperature was elevated to mimic the practical operation conditions of water electrolyzers. It was found that the OER activity enhancement of the magnetized SmCo₅ /CoO_x H_y catalyst could be preserved up to 60 °C.

Impact of Single-Pulse, Low-Intensity Laser Post-Processing on Structure and Activity of Mesostructured Cobalt Oxide for the Oxygen Evolution Reaction

Herein, we report nanosecond, single-pulse laser post-processing (PLPP) in a liquid flat jet with precise control of the applied laser intensity to tune structure, defect sites, and the oxygen evolution reaction (OER) activity of mesostructured Co3O4. High-resolution X-ray diffraction (XRD), Raman, and X-ray photoelectron spectroscopy (XPS) are consistent with the formation of cobalt vacancies at tetrahedral sites and an increase in the lattice parameter of Co3O4 after the laser treatment. X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) further reveal increased disorder in the structure and a slight decrease in the average oxidation state of the cobalt oxide. Molecular dynamics simulation confirms the surface restructuring upon laser post-treatment on Co3O4. Importantly, the defect-induced PLPP was shown to lower the charge transfer resistance and boost the oxygen evolution activity of Co3O4. For the optimized sample, a 2-fold increment of current density at 1.7 V vs RHE is obtained and the overpotential at 10 mA/cm2 decreases remarkably from 405 to 357 mV compared to pristine Co3O4. Post-mortem characterization reveals that the material retains its activity, morphology, and phase structure after a prolonged stability test.

Cobalt Iron Oxides Prepared by Acidic Redox-Assisted Precipitation: Characterization, Applications, and New Opportunities

The microscopic homogeneity of mixed metals in a single-phase oxide is a critical issue in improving material performance. Aqueous alkaline precipitation is the most common approach but it has the limits of microscopic inhomogeneity because of intrinsically different precipitation rates between metal cations. Herein, we demonstrate a new preparation of uniformly structural substituted cobalt iron oxides via acidic redox-assisted precipitation (ARP) upon the interaction of CoII and K2FeO4. This low-pH synthesis features the redox process between Co and Fe, presumably through the formation of inner-sphere complexes such as [(H2O)5CoII-O-FeVIO3]. With the nucleation starting from such complexes, one obtains a product with predominantly mixed-metal Co-O-Fe moieties, which improves the electrical conductivity of the product. This work further analyzes how the properties of the product species evolve during the hydrothermal synthesis step in the ARP process. We see that the Co/Fe ratio slowly increases from about 1:1 to a final value of 2:1, but does not reach the expected redox stoichiometry of 3:1. At the same time, the magnetization also increases, reaching a value of 16.9 emu g-1 for the final superparamagnetic product, which is three times higher than the value of monometallic Co3O4 and Fe2O3. The cobalt iron oxide samples obtained from ARP also possess superior oxygen evolution activity (307 mV overpotential at 10 mA cm-2 μg-1) compared to a mixture of Co3O4 and Fe2O3 (422 mV) or pure cobalt oxide (350 mV), highlighting the structure-induced enhancement of the catalytic activity. The difficult synthesis of evenly blended trinary/quaternary metals in a single-oxide phase may become possible in the future via ARP.

Spin-sate reconfiguration induced by alternating magnetic field for efficient oxygen evolution reaction

Oxygen evolution reaction (OER) plays a determining role in electrochemical energy conversion devices, but challenges remain due to the lack of effective low-cost electrocatalysts and insufficient understanding about sluggish reaction kinetics. Distinguish from complex nano-structuring, this work focuses on the spin-related charge transfer and orbital interaction between catalysts and intermediates to accelerate catalytic reaction kinetics. Herein, we propose a simple magnetic-stimulation approach to rearrange spin electron occupation in noble-metal-free metal-organic frameworks (MOFs) with a feature of thermal-differentiated superlattice, in which the localized magnetic heating in periodic spatial distribution makes the spin flip occur at particular active sites, demonstrating a spin-dependent reaction pathway. As a result, the spin-rearranged Co_0.8Mn_0.2 MOF displays mass activities of 3514.7 A g_metal⁻¹ with an overpotential of ~0.27 V, which is 21.1 times that of pristine MOF. Our findings provide a new paradigm for designing spin electrocatalysis and steering reaction kinetics.

The oxygen evolution reaction in magnetic catalysts is related with their spin configuration. Here, the authors propose a magnetic-stimulation method to rearrange spin electron occupation in thermal-differentiated superlattices.

Modifying redox properties and local bonding of Co3O4 by CeO2 enhances oxygen evolution catalysis in acid

Developing efficient and stable earth-abundant electrocatalysts for acidic oxygen evolution reaction is the bottleneck for water splitting using proton exchange membrane electrolyzers. Here, we show that nanocrystalline CeO₂ in a Co₃O₄/CeO₂ nanocomposite can modify the redox properties of Co₃O₄ and enhances its intrinsic oxygen evolution reaction activity, and combine electrochemical and structural characterizations including kinetic isotope effect, pH- and temperature-dependence, in situ Raman and ex situ X-ray absorption spectroscopy analyses to understand the origin. The local bonding environment of Co₃O₄ can be modified after the introduction of nanocrystalline CeO₂, which allows the Co^III species to be easily oxidized into catalytically active Co^IV species, bypassing the potential-determining surface reconstruction process. Co₃O₄/CeO₂ displays a comparable stability to Co₃O₄ thus breaks the activity/stability tradeoff. This work not only establishes an efficient earth-abundant catalysts for acidic oxygen evolution reaction, but also provides strategies for designing more active catalysts for other reactions.

Developing efficient and stable earth-abundant electrocatalysts for acidic oxygen evolution reaction is challenging. Here, the authors modify the local bonding environment of Co₃O₄ by CeO2 nanocrystallites to regulate the redox properties, thus enhance the catalytic activity.

Quantification of Redox Sites during Catalytic Propane Oxychlorination by Operando EPR Spectroscopy

Identification and quantification of redox-active centers at relevant conditions for catalysis is pivotal to understand reaction mechanisms and requires development of advanced operando methods. Herein, we demonstrate operando EPR spectroscopy as an important technique to quantify the oxidation state of representative CrPO₄ and EuOCl catalysts during propane oxychlorination, an attractive route for propylene production. In particular, we show that the space-time-yield of C₃ H₆ correlates with the amount of Cr²⁺ and Eu²⁺ ions generated over the catalysts during reaction. These results provide a powerful strategy to gather quantitative understanding of selective alkane oxidation, which could potentially be extrapolated to other functionalization approaches and operating conditions.