Degradation of pentachlorophenol by pure and mixed cultures in two different soils

Removal, accumulation, and micro-ecosystem impacts of typical POPs in bioretention systems with different media: A runoff infiltration study

Bioretention systems prove effective in purifying common persistent organic pollutants (POPs) found in urban rainfall runoff. However, the response process of the microecosystem in the media becomes unclear when POPs accumulate in bioretention systems. In this study, we constructed bioretention systems and conducted simulated rainfall tests to elucidate the evolution of micro-ecosystems within the media under typical POPs pollution. The results showed all POPs in runoff were effectively removed by surface adsorption in different media, with load reduction rates of >85 % for PCBs and OCPs and > 80 % for PAHs. Bioretention soil media (BSM) + water treatment residuals (WTR) media exhibited greater stability in response to POPs contamination compared to BSM and pure soil (PS) media. POPs contamination significantly impacted the microecology of the media, reducing the number of microbial species by >52.6 % and reducing diversity by >27.6 % at the peak of their accumulation. Enzyme activities were significantly inhibited, with reductions ranging from 44.42 % to 60.33 %. Meanwhile, in terms of ecological functions, the metabolism of exogenous carbon sources significantly increased (p < 0.05), while nitrogen and sulfur cycling processes were suppressed. Microbial diversity and enzyme activities showed some recovery during the dissipation of POPs but did not reach the level observed before the experiment. Dominant bacterial species and abundance changed significantly during the experiment. Proteobacteria were suppressed, but remained the dominant phylum (all relative abundances >41 %). Bacteroidota, Firmicutes, and Actinobacteria adapted well to the contamination. Pseudomonas, a typical POPs-degrading bacterium, displayed a positive correlation between its relative abundance and POPs levels (mean > 10 %). Additionally, POPs and media properties, including TN and pH, are crucial factors that collectively shape the microbial community. This study provides new insights into the impacts of POPs contamination on the microbial community of the media, which can improve media design and operation efficiency.

Accumulation of typical persistent organic pollutants and heavy metals in bioretention facilities: Distribution, risk assessment, and microbial community impact

Bioretention facilities have proven highly effective in removing pollutants from runoff. However, there is a concerning paucity of research on the contamination characteristics and associated risks posed by refractory pollutants in these facilities following long-term operation. This research focuses on the distribution, sources, microbial community impact, and human health risks of pollutants in eight bioretention facilities that have been operational for 5-11 years. The results showed that the distribution of Cu, Zn, and Cd was closely related to anti-seepage measures. PAHs, PCBs, and OCPs primarily accumulated in the surface, with concentrations ranging from 7.42 to 20.34 mg/kg, 31.8-77.3 μg/kg, and 60.5-163.6 μg/kg, respectively. Their concentrations inversely correlate with the depth of the media. Although the majority of contaminants remained below their respective risk thresholds, their concentrations typically exceeded those of background soil values, indicating an enrichment phenomenon. Source analysis revealed that PAHs primarily originate from oil combustion, PCBs were linked to their related industrial products, DDTs had their main sources in technical DDx and residues from the use of dicofol, while HCHs were traced back to historical residues from agricultural activities. Microbial α-diversity (Chao 1 and Shannon) decreased by 8.3-23.4% and 0.8-4.4%, respectively, in different facilities after long-term operation. The most dominant microbial phylum in the facilities was Proteobacteria (all relative abundances >48%). The total relative abundance of dominant genera was 6.7-34.3% higher than the control site, and Pseudomonas, a typical POPs-heavy metal degrading bacterium, had the highest relative abundance (>1.2%). Cu, Zn, and Cd present no non-carcinogenic risks and have low potential ecological risks. However, the lifetime cancer risk for PAHs is 10-6 ∼10-4 in most facilities and is of concern. The cancer risk for PCBs is acceptable, while OCPs pose a low cancer risk only for children.

Combined bioaugmentation and biostimulation techniques in bioremediation of pentachlorophenol contaminated forest soil

Pentachlorophenol (PCP) is quite persistent in the environment and severely affects different ecosystems including forest soil. The main objective of this work was to study different bioremediation processes of artificially PCP (100 mg kg^-1) contaminated forest soil (Sc). In fact, we used bioaugmentation by adding two different bacterial consortia B1 and B2, biostimulation procedures by amendments based on forest compost (FC), municipal solid waste compost (MC), sewage sludge (SS), and phosphate, and their combined treatments. Soil physical and chemical properties, residual PCP, soil microbial biomass carbon, soil respiration and some enzymatic activities at zero time and after 30 d of incubation, were evaluated. A net reduction of PCP, 71% of the initial concentration, after 30 d-incubation occurred in the sample Sc+B1+FC, as the best performance among all treatments, due to natural attenuation, immobilization of PCP molecules in the forest soil through organic amendments, and the action of the exogenous microbial consortium B1. The single application of FC or B1 led to a depletion of PCP concentration of 52% and 41%, respectively. Soil microbial biomass carbon decreased in PCP contaminated soil but it increased when organic amendment also in combination with microbial consortia was carried out as bioremediation action. Soil respiration underwent no changes in contaminated soil and increased under FC based bioremediation treatment. These results demonstrate that the combined treatments of biostimulation and bioaugmentation might be a promising process for remediation of PCP contaminated soil.

Role of biochar in biodegradation of nonylphenol in sediment: Increasing microbial activity versus decreasing bioavailability

The observed strong sorption of hydrophobic organic contaminants (HOCs) to biochar presents potential implications for HOCs bioavailability and bioaccessibility in sediments, while biochar could impact sediment microbial ecology. However, the comprehensive study on the effects of biochar on HOC biodegradation coupled with bioavailability and microbial ecology are rarely documented. In this paper, the effects of biochar on the biodegradation of nonylphenol (NP) were investigated using 3 different NP concentrations (20, 50 and 500 mg/Kg) in sediments amended with different percentage of rice straw biochar (RC). Results showed that the influence of RC on NP biodegradation varied with different NP concentrations. At low NP concentrations, RC suppressed NP biodegradation by reducing NP bioavailability, while at high NP concentrations, moderate RC addition promoted biodegradation by reducing toxicity of NP to microbes. The effects of NP on microbial community structures were significant (P < 0.01), but those of RC were not significant (P > 0.05). The RC affected microorganisms through altering NP toxicity, microbial quantity and activity, but not microbial community structures. This study indicated that there could be an optimal biochar percentage in biochar-sediment systems at different HOC concentrations, which strengthened HOC biodegradation process and accelerated biodegradation rate, forming adsorption-biodegradation coupled bioremediation.

Impact of chemical oxidation on indigenous bacteria and mobilization of nutrients and subsequent bioremediation of crude oil-contaminated soil

Fenton pre-oxidation provides nutrients to promote bioremediation. However, the effects of the indigenous bacteria that remain following Fenton oxidation on nutrient mobilization and subsequent bioremediation remain unclear. Experiments were performed with inoculation with native bacteria and foreign bacteria or without inoculation after four regimens of stepwise pre-oxidations. The effects of the indigenous bacteria remaining after stepwise oxidation on nutrient mobilization and subsequent bioremediation over 80 days were investigated. After stepwise Fenton pre-oxidation at a low H₂O₂ concentration (225×4), the remaining indigenous bacterial populations reached their peak (4.8±0.17×10⁶CFU/g), the nutrients were mobilized rapidly, and the subsequent bioremediation of crude oil was improved (biodegradation efficiency of 35%). However, after stepwise Fenton pre-oxidation at a high H₂O₂ concentration (450×4), only 3.6±0.16×10³CFU/g of indigenous bacteria remained, and the indigenous bacteria that degrade C₁₅-C₃₀ alkanes were inhibited. The nutrient mobilization was then highly limited, and only 19% of total petroleum hydrocarbon was degraded. Furthermore, the recovery period after the low H₂O₂ concentration stepwise Fenton pre-oxidation (225×4) was less than 20 days, which was 20-30 days shorter than with the other pre-oxidation treatments. Therefore, stepwise Fenton pre-oxidation at a low H₂O₂ concentration protects indigenous bacterial populations and improves the nutrient mobilization and subsequent bioremediation.

Degradation and dechlorination of pentachlorophenol by microwave-activated persulfate

The degradation performance of pentachlorophenol (PCP) by the microwave-activated persulfate (MW/PS) process was investigated in this study. The results indicated that degradation efficiency of PCP in the MW/PS process followed pseudo-first-order kinetics, and compared with conventional heating, microwave heating has a special effect of increasing the reaction rate and reducing the process time. A higher persulfate concentration and reaction temperature accelerated the PCP degradation rate. Meanwhile, increasing the pH value and ionic strength of the phosphate buffer slowed down the degradation rate. The addition of ethanol and tert-butyl alcohol as hydroxyl radical and sulfate radical scavengers proved that the sulfate radicals were the dominant active species in the MW/PS process. Gas chromatography-mass spectrometry (GC-MS) was employed to identify the intermediate products, and then a plausible degradation pathway involving dechlorination, hydrolysis, and mineralization was proposed. The acute toxicity of PCP, as tested with Photobacterium phosphoreum, Vibrio fischeri, and Vibrio qinghaiensis, was negated quickly during the MW/PS process, which was in agreement with the nearly complete mineralization of PCP. These results showed that the MW/PS process could achieve a high mineralization level in a short time, which provided an efficient way for PCP elimination from wastewater.

Nonylphenol biodegradation in river sediment and associated shifts in community structures of bacteria and ammonia-oxidizing microorganisms

Nonylphenol (NP) is one of commonly detected contaminants in the environment. Biological degradation is mainly responsible for remediation of NP-contaminated site. Knowledge about the structure of NP-degrading microbial community is still very limited. Microcosms were constructed to investigate the structure of microbial community in NP-contaminated river sediment and its change with NP biodegradation. A high level of NP was significantly dissipated in 6-9 days. Bacteria and ammonia-oxidizing archaea (AOA) were more responsive to NP amendment compared to ammonia-oxidizing bacteria (AOB). Gammaproteobacteria, Alphaproteobacteria and Bacteroidetes were the largest bacterial groups in NP-degrading sediment. Microorganisms from bacterial genera Brevundimonas, Flavobacterium, Lysobacter and Rhodobacter might be involved in NP degradation in river sediment. This study provides some new insights towards NP biodegradation and microbial ecology in NP-contaminated environment.

Study on Combination and Bioremediation of Chlorimuron-Ethyl-Degrading Strains

The degradation capacity of the four chlorimuron-ethyl-degrading strains, D310-1, LCY-2, LCY-3 and LCY-4, which identified asRhodococcussp.,Stenotrophomonas maltophilia sp,Bacillus subtilis sp., andRhodotorula mucilaginosasp., respectively, combined in different ways was examined in this study. Then the optimal degradation conditions and mitigation phytotoxicity of chlorimuron-ethyl on sensitive crop were investigated by both orthogonal test and pot culture experiment. The experimental results showed that the combination of four strains was adopted, and the removal rate of chlorimuron-ethyl reached the maximum of 90% in 30 days. Then the optimal degradation conditions were inoculum size 2.5%, temperature 28°C, pH 7.0 and the soil moisture 35%, and the mixed strains could eradicate 92.57% of chlorimuron-ethyl within 30 days. Furthermore pot culture experiment indicated that inoculation of mixed strains could also mitigate the phytotoxic effects of chlorimuron-ethyl on the growth of cucumber seedling.

Impact of chlorophenols on microbiota of an unpolluted acidic soil: microbial resistance and biodegradation

The impact of 2-monochlorophenol (MCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) on the microbial community of an acidic forest soil was studied under controlled laboratory conditions by spiking microcosms with the pollutants at concentrations ranging from 0.1 to 5000 mg kg(-1). A decrease in the cumulative respirometric values and changes in the bacterial and fungal community composition were detected at 1000 mg MCP kg(-1), 100 mg TCP kg(-1) and 100 and 1000 mg PCP kg(-1). However, drastic effects on the microbial community were revealed only at higher concentrations of MCP and TCP, although the toxicity of PCP was expected to be stronger. The acidic condition of the soil presumably reduces bioavailability of PCP, leading to less pronounced effects than the other pollutants. This finding highlights the consideration of pollutant bioavailability in each environment to adequately assess contamination effects. Twenty-two different chlorophenol-resistant and potentially degrading microorganisms were isolated from highly polluted microcosms. The most resistant isolates were related to Burkholderia arboris, Bacillus circulans, Paenibacillus taichungensis, Luteibacter rhizovicina and Janibacter melonis. These isolates also showed the capacity to reduce the concentration of TCP or PCP between 15% and 35% after 5 days of incubation (initial concentration of 50 mg L(-1)). The isolate related to B. circulans is an atypical case of a member of the Firmicutes group for which chlorophenol-degrading capacities have been described.

The microbiota of an unpolluted calcareous soil faces up chlorophenols: Evidences of resistant strains with potential for bioremediation

To highlight the effects of a variety of chlorophenols (CP) in relation to the response of an indigenous bacterial community, an agricultural Mediterranean calcareous soil has been studied in microcosms incubated under controlled laboratory conditions. Soil samples were artificially polluted with 2-monochlorophenol (MCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP), at concentrations ranging from 0.1 up to 5000 mg kg(-1). Both activity and composition of the microbial community were assessed during several weeks, respectively, by respirometric methods and PCR-DGGE analysis of extracted DNA and RNA. Significant decreases in soil respirometric values and changes in the bacterial community composition were observed at concentrations above 1000 mg kg(-1) MCP and TCP, and above 100 mg kg(-1) PCP. However, the persistence of several active bacterial populations in soil microcosms contaminated with high concentration of CP, as indicated by DGGE fingerprints, suggested the capacity of these native bacteria to survive in the presence of the pollutants, even without a previous adaptation or contact with them. The isolation of potential CP degraders was attempted by culture plating from microcosms incubated with high CP concentrations. Twenty-three different isolates were screened for their resistance to TCP and PCP. The most resistant isolates were identified as Kocuria palustris, Lysobacter gummosus, Bacillus sp. and Pseudomonas putida, according to 16S rRNA gene homology. In addition, these four isolates also showed the capacity to reduce the concentration of TCP and PCP from 15% to 30% after 5d of incubation in laboratory assays (initial pollutant concentration of 50 mg L(-1)). Isolate ITP29, which could be a novel species of Bacillus, has been revealed as the first known member in this bacterial group with potential for CP bioremediation applications, usually wide-spread in the soil natural communities, which has not been reported to date as a CP degrader.

Persistence and behavior of pesticides in cotton production in Turkish soils

Turkey is the sixth largest producer of cotton in the world. Two of the most commonly applied pesticides used in cotton production are trifluralin and endosulfan. Although both are very effective at controlling pests, their persistence in the environment poses risks to human health and the environment. Four loam soils and one silty-loam soil were studied to evaluate the persistence of trifluralin and endosulfan in relation to soil characteristics. Degradation with trifluralin reached as high as 70% of the applied doses. Soils with the highest organic matter content had the lowest degradation rate, indicating a tighter sorption of trifluralin. Endosulfan degradation was a function of soil type and the specific isomer, with beta-endosulfan depicting the highest degradation.

A microbiological study of the self-cleaning potential of oily Arabian Gulf coasts

BACKGROUND, AIM, AND SCOPE

Due to the active production and transport of crude oil in the Arabian Gulf region, the Arabian Gulf coasts are routinely polluted with oil. Therefore, such coasts have been subject of studies aiming at assessing the roles of indigenous microbial consortia in cleaning these environments. In the present study, epilithic microbial communities along Kuwait coasts were studied for their oil degradation potential.

MATERIALS AND METHODS

Gravel particles coated with deep green biofilms were collected from four coastal sites in autumn, winter, and spring. Phototrophs in these consortia were determined in terms of their chlorophyll a contents and identified by their morphological characteristics. Total bacteria were counted microscopically and cultivable bacteria by the dilution plating method on nutrient agar as well as on inorganic medium containing oil as a sole source of carbon and energy. The bacterial community structures were also characterized and compared by denaturing gradient gel electrophoresis (DGGE).

RESULTS

Epilithic biomass samples from the four sites in the three seasons were rich in diatoms and picocyanobacteria as well as total bacteria. Direct counting gave bacterial numbers per square centimeter gravel surface of 2 to 6 x 10(7) cells depending on the sampling site and season. Cultivable bacterial numbers on nutrient agar and crude oil as a sole source of carbon were 3 x 10(3) to 8 x 10(4) and 1 x 10(3) to 7 x 10(3) cells/cm(2) gravel surface, respectively. The DGGE profiles of epilithon biomass samples revealed major 16S rDNA bands that matched bands of pure oil-utilizing bacterial isolates.

DISCUSSION

The microbial communities showed a degree of consistency in all sites and seasons.

CONCLUSIONS

The microbial consortia coating gravel particles are potentially suitable tools for self-cleaning of oily Gulf coasts. They are rich in oil-utilizing bacteria whose activities are probably enhanced by oxygen produced by the phototrophic partners in the consortia.

RECOMMENDATIONS AND PERSPECTIVES

The combination of conventional microbiological analysis with molecular approaches gives an enhanced idea about natural microbial communities especially those with environmental application potential.

Environmental impact of aquaculture and countermeasures to aquaculture pollution in China

GOAL, SCOPE AND BACKGROUND

Aquaculture activities are well known to be the major contributor to the increasing level of organic waste and toxic compound in the aquaculture industry. Along with the development of intensive aquaculture in China, concerns are evoked about the possible effects of ever-increasing aquaculture waste both on productivity inside the aquaculture system and on the ambient aquatic ecosystem. Therefore, it is apparent that appropriate waste treatment processes are needed for sustaining aquaculture development. This review aims at identifying the current status of aquaculture and aquaculture waste production in China.

MAIN FEATURES

China is the world's largest fishery nation in terms of total seafood production volume, a position it has maintained continuously since 1990. Freshwater aquaculture is a major part of the Chinese fishery industry. Marine aquaculture in China consists of both land-based and offshore aquaculture, with the latter mostly operated in shallow seas, mud flats and protected bays. The environmental impacts of aquaculture are also striking.

RESULTS

Case studies on pollution hot spots caused by aquaculture have been introduced. The quality and quantity of waste from aquaculture depends mainly on culture system characteristics and the choice of species, but also on feed quality and management. Wastewater without treatment, if continuously discharged into the aquatic environment, could result in remarkable elevation of the total organic matter contents and cause considerable economy lost. Waste treatments can be mainly classified into three categories: physical, chemical and biological methods.

DISCUSSION

The environmental impacts of different aquaculture species are not the same. New waste treatments are introduced as references for the potential development of the waste treatment system in China. The most appropriate waste treatment system for each site should be selected according to the sites' conditions and financial status as well as by weighing the advantages and disadvantages of each system. Strategies and perspectives for sustainable aquaculture development are proposed, with the emphasis on environmental protection.

CONCLUSIONS

Negative effects of waste from aquaculture to aquatic environment are increasingly recognized, though they were just a small proportion to land-based pollutants. Properly planned use of aquaculture waste alleviates water pollution problems and not only conserves valuable water resources but also takes advantage of the nutrients contained in effluent. It is highly demanding to develop sustainable aquaculture which keeps stocking density and pollution loadings under environmental capacity.

RECOMMENDATIONS AND PERSPECTIVES

The traditional procedures for aquaculture waste treatment, mainly based on physical and chemical means, should be overcome by more site-specific approaches, taking into account the characteristics and resistibility of the aquatic environment. Further research needs to improve or optimize the current methods of wastewater treatment and reuse. Proposed new treatment technology should evaluate their feasibility at a larger scale for practical application.