CO2 Hydrogenation on Carbides Formed in situ on Carbon-Supported Iron-Based Catalysts in High-Density Supercritical Medium

CO2 conversion via hydrogenation over iron-based catalysts on non-carbon supports produces mainly CO or methane by the Sabatier reaction, while the formation of C2+ hydrocarbons is of greatest interest. CxHy production from CO2 may be considered as a two-step process with the initial formation of carbon monoxide by the reverse water gas shift reaction followed by the Fischer-Tropsch synthesis (FTS). In the present work CO2 hydrogenation over iron-based catalysts (Fe, FeCr, FeK) deposited on a carbon carrier has been studied. The catalyst structure has been investigated by XRD, TEM, XPS, Mössbauer spectroscopy and in situ magnetometry. Spinel-type oxide phases (magnetite Fe3O4; maggemite γ-Fe2O3, and, in the case of FeCr/C catalyst, iron chromite Fe1+xCr2-xO4) are formed on the catalysts, and they contribute exclusively to the CO production. Iron carbides, active in FTS, are formed on Fe- and FeK-catalysts during pre-activation in reducing environment and then during the reaction. The reaction over the 20Fe1K/C catalyst in supercritical high-density CO2/H2 substrate (400 °C, 8.5 MPa) leads to 72 % selectivity for C1-C12+ hydrocarbons (alkanes and alkenes). Under the same conditions, iron carbides do not form on the FeCr/C catalysts, and CO2 hydrogenation results in the CO formation with the selectivity of 90-100 %.

Supercritical fluid technology as a sustainable alternative method for textile dyeing: An approach on waste, energy, and CO2 emission reduction

The clothing industry is considered one of the most polluting industries on the planet due to the high consumption of water, energy, chemicals/dyes, and high generation of solid waste and effluents. Faced with environmental concerns, the textile ennoblement sector is the most critical of the textile production chain, especially the traditional dyeing processes. As an alternative to current problems, dyeing with supercritical CO2 (scCO2) has been presented as a clean and efficient process for a sustainable textile future. Supercritical fluid dyeing (SFD) has shown a growing interest due to its significant impact on environmental preservation and social, economic, and financial gains. The main SFD benefits include economy and reuse of non-adsorbed dyes; reduction of process time and energy expenditure; capture of atmospheric CO2 (greenhouse gas); use and recycling of CO2 in SFD; generation of carbon credits; water-free process; effluent-free process; reduction of CO2 emission and auxiliary chemicals. Despite being still a non-scalable and evolving technology, SFD is the future of dyeing. This review presented a comprehensive overview of the environmental impacts caused by traditional processes and confronted the advantages of SFD. The SFD technique was introduced, along with its latest advances and future perspectives. Financial and environmental gains were also discussed.

Critical Point Drying of Graphene Field-Effect Transistors Improves Their Electric Transport Characteristics

A critical point drying (CPD) technique is reported with supercritical CO2 as a cleaning step for graphene field-effect transistors (GFETs) microfabricated on oxidized Si wafers, which results in an increase of the field-effect mobility and a decrease of the impurity doping. It is shown that the polymeric residues remaining on graphene after the transfer process and device microfabrication are significantly reduced after the CPD treatment. Moreover, the CPD effectively removes ambient adsorbates such as water therewith reducing the undesirable p-type doping of the GFETs. It is proposed that CPD of electronic, optoelectronic, and photonic devices based on 2D materials as a promising technique to recover their intrinsic properties after the microfabrication in a cleanroom and after storage at ambient conditions.

Transfer Hydrogenation of Biomass-Like Phenolic Compounds and 2-PrOH over Ni-Based Catalysts Prepared Using Supercritical Antisolvent Coprecipitation

Transfer hydrogenation (TH) is considered as one of the most promising ways to convert biomass into valuable products. This study aims to demonstrate the performance of high-loaded Ni-based catalysts in the TH of phenolic compounds such as guaiacol and dimethoxybenzenes. The experiments were carried out under supercritical conditions at 250 °C using 2-PrOH as the only hydrogen donor. Ni-SiO2 and NiCu-SiO2 were synthesized using the eco-friendly original method based on supercritical antisolvent coprecipitation. It has been found that guaiacol is rapidly converted into 2-methoxycyclohexanol and cyclohexanol, while the presence of Cu impedes the formation of the latter product. Transformations of dimethoxybenzene position isomers are slower and result in different products. Thus, 1,3-dimethoxybenzene loses oxygen atoms transform into methoxycyclohexane and cyclohexanol, whereas the saturation of the aromatic ring is more typical for other isomers. The Cu addition increases specific catalytic activity in the TH of 1,2-and 1,3-dimethoxybenzene compared to the Cu-free catalyst.

Synthesis of Co-Ni Alloy Particles with the Structure of a Solid Substitution Solution by Precipitation in a Supercritical Carbon Dioxide

Mixed Co-Ni bimetallic systems with the structure of a solid substitution solution have been synthesized using the supercritical antisolvent precipitation (SAS) method, which uses supercritical CO₂ as an antisolvent. The systems obtained have been characterized in detail using X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared (FTIR) spectroscopy, and magnetostatic measurements. It has been found that Co-enriched systems have a defective hexagonal close-packed (hcp) structure, which was described by a model which embedded cubic fragments of packaging into a hexagonal close-packed (hcp) structure. It has been shown that an increase in water content at the precipitation stage leads to a decrease in the size of cubic fragments and a more uniform distribution of them in Co-enriched systems. It has also been shown that mixed systems have the greatest coercivity in the line of samples. Ni-enriched bimetallic systems have a cubic close-packed (ccp) structure with modified crystal lattice parameters.

Synthesis of Catalytic Precursors Based on Mixed Ni-Al Oxides by Supercritical Antisolvent Co-Precipitation

Mixed Ni-Al oxide catalytic precursors with different elemental ratios (20, 50, and 80 wt.% Ni0) were synthesized using green supercritical antisolvent co-precipitation (SAS). The obtained oxide precursors and metal catalysts were characterized in detail by X-ray diffraction (XRD) analysis, atomic pair distribution function (PDF) analysis, CO adsorption, and high-resolution transmission electron microscopy (HRTEM). It was found that the composition and structure of the Ni-Al precursors are related to the Ni content. The mixed Ni1−xAlxO oxide with NiO-based crystal structure was formed in the Ni-enriched sample, whereas the highly dispersed NiAl2O4 spinel was observed in the Al-enriched sample. The obtained metal catalysts were tested in the process of anisole H2-free hydrogenation. 2-PrOH was used as a hydrogen donor. The catalyst with 50 wt.% Ni0 demonstrated the highest activity in the hydrogenation process.

Biocompatible and functional properties of a microdispersed tissue-specific 3D matrix from decellularized porcine cartilage

In contrast to decellularization of soft tissues for use as tissue-specific matrices in the creation of tissue-engineered constructs, decellularization of cartilage tissue requires several processing techniques, which can negatively affect the biocompatibility and functional properties of the native extracellular matrix (ECM).

Objective: to study the biocompatible and functional properties of microdispersed tissue-specific 3D matrix from a porcine cartilage that is decellularized by sequential use of chemical, physical and enzymatic techniques.

Materials and methods. For decellularization, microdispersed cartilage particles (MCPs), obtained by cryomilling, were incubated in detergent solutions (sodium dodecyl sulfate and Triton X-100), then treated with supercritical carbon dioxide (scCO2) with 10% ethanol and DNase I. The Ames test (Salmonella typhimurium reverse mutation assay) was used to determine the genotoxicity of decellularized microdispersed cartilage particles (dMCPs). Local and general toxic effects, as well as resorption of dMCPs were studied in vivo on sexually mature outbred rats. Decellularized MCP specimens (10 mg) were implanted into the thigh muscle tissue. Viability of human adipose-derived mesenchymal stem/stromal cells (hAdMSCs), when cultured on dMCPs, was analyzed by in vivo microscopy, stained with fluorescent Calcein AM dye. Cell metabolic activity was assessed using PrestoBlue™ Cell Viability Reagent.

Results. It has been proven that porcine dMCPs implanted in rat muscle after treatment with scCO2 do not exhibit local and general toxic effects, and do not show genotoxicity and negative effects on the reproductive system of animals. After 6 months of in vivo experiment, most (87%) of the implanted decellularized cartilage was resorbed. It was shown that the resulting matrices are able to support adhesion and proliferation of hAdMSCs. Conclusion. Porcine dMCP specimens are suitable for biocompatible medical products in terms of local and general toxic effects, genotoxicity and reproductive toxicity, and can be used as a matrix for creating cell- and tissue-engineered cartilage constructs.

The Use of the Thiol-Ene Addition Click Reaction in the Chemistry of Organosilicon Compounds: An Alternative or a Supplement to the Classical Hydrosilylation?

This review presents the main achievements in the use of the thiol-ene reaction in the chemistry of silicones. Works are considered, starting from monomers and ending with materials.The main advantages and disadvantages of this reaction are demonstrated using various examples. A critical analysis of the use of this reaction is made in comparison with the hydrosilylation reaction.

Organosilicone Compounds in Supercritical Carbon Dioxide

This review considers the key advantages of using supercritical carbon dioxide as a solvent for systems with organosilicon compounds. Organosilicon polymeric materials synthesis as well as the creation and modification of composites based on them are discussed. Polydimethylsiloxane and analogues used as polymerization stabilizers and nucleation promoters in pore formation processes are analyzed as well.

Structure-guided insights into non-catalytic (α-hydroxy)alkylation of olefins with alcohols

New experimental data on the mutual reactivity of alcohols and olefins were obtained at 350 °C and a surrogate for olefins was suggested in return.

A Versatile Equilibrium Method for the Synthesis of High-Strength, Ladder-like Polyphenylsilsesquioxanes with Finely Tunable Molecular Parameters

A versatile equilibrium method for synthesizing ladder-like polyphenylsilsesquioxanes (L-PPSQs) with various molecular weights (from 4 to 500 kDa) in liquid ammonia was developed. The effect of diverse parameters, such as temperature, monomer concentration, reaction time, addition or removal of water from the reaction medium, on the polycondensation process was determined. The molecular weight characteristics and structure of the L-PPSQ elements obtained were determined by GPC, 1H, 29Si NMR, IR spectroscopy, viscometry, and PXRD methods. The physicochemical properties of L-PPSQs were determined by TGA and mechanical analyses.

Solvation Effects in Organic Chemistry: A Short Historical Overview

This short overview describes the historical development of the physics and chemistry of organic solvents and solutions from the alchemist era until the present time based on some carefully selected examples that can be considered landmarks in the history of solution chemistry.

Solute Diffusion into Polymer Swollen by Supercritical CO2 by High-Pressure Electron Paramagnetic Resonance Spectroscopy and Chromatography

High-pressure electron paramagnetic resonance (EPR) was used to measure translational diffusion coefficients (D_tr) of a TEMPONE spin probe in poly(D,L-lactide) (PDLLA) and swollen in supercritical CO₂. D_tr was measured on two scales: macroscopic scale (>1 μm), by measuring spin probe uptake by the sample; and microscopic scale (<10 nm), by using concentration-dependent spectrum broadening. Both methods yield similar translational diffusion coefficients (in the range 5-10 × 10^-12 m²/s at 40-60 °C and 8-10 MPa). Swollen PDLLA was found to be homogeneous on the nanometer scale, although the TEMPONE spin probe in the polymer exhibited higher rotational mobility (τ_corr = 6 × 10^-11 s) than expected, based on its D_tr. To measure distribution coefficients of the solute between the swollen polymer and the supercritical medium, supercritical chromatography with sampling directly from the high-pressure vessel was used. A distinct difference between powder and bulk polymer samples was only observed at the start of the impregnation process.