Adhesive Coacervates Driven by Hydrogen-Bonding Interaction

Coacervation plays a critical role in numerous biological activities such as constructing biological tissues and achieving robust wet adhesion of marine sessile organisms, which conventionally occurs when oppositely charged polyelectrolytes are mixed in aqueous solutions driven by electrostatic attraction. Here, a novel type of adhesive coacervate is reported, driven by hydrogen-bonding interactions, readily formed by mixing silicotungstic acid and nonionic polyethylene glycol in water, providing a new approach for developing coacervates from nonionic systems. The as-prepared coacervate is easily paintable underwater, show strong wet adhesion to diverse substrates, and has been successfully applied as a hemostatic agent to treat organ injuries without displaying hemolytic activity, while with inherent antimicrobial properties thus avoiding inflammations and infections due to microorganism accumulation. This work demonstrates that coacervation can occur in salt-free environments via non-electrostatic interactions, providing a new platform for engineering multifunctional coacervate materials as tissue glues, wound dressings and membrane-free cell systems.

pH-Responsive Janus Film Constructed with Hydrogen-Bonding Assembly and Dopamine Chemistry

Poly(acrylic acid) (PAA) was partially grafted with dopamine (PAA-dopa), and then layer-by-layer assembled with poly(vinylpyrrolidone) (PVPON) to prepare hydrogen-bonded (PVPON/PAA-dopa) _n film. Polydopamine (PDA) was deposited on (PVPON/PAA-dopa) _n film in the presence of oxidant, and hence the whole (PVPON/PAA-dopa) _nPDA film was cross-linked. (PVPON/PAA-dopa) _nPDA could be utilized as a platform to produce the free-standing Janus film because of the easy detaching process and various chemical reactivity of PDA layer. Ag nanoparticles were formed on (PVPON/PAA-dopa) _nPDA film by electroless metallization. 1 H,1 H,2 H,2 H-Perfluorodecanethiol (PFDT) was used to further modify the film through Michael addition. After detaching from the substrate, (PVPON/PAA-dopa)₂₀PDA/Ag/PFDT exhibits reversible swelling-shrinking behavior as the pH value changes. This free-standing film shows Janus character, one side is hydrophobic, whereas the other side is hydrophilic. In addition, the hydrophobic surface exhibits a surface-enhanced Raman scattering effect, whereas the hydrophilic side does not.

Transparent, Healable Elastomers with High Mechanical Strength and Elasticity Derived from Hydrogen-Bonded Polymer Complexes

It is challenging to develop healable elastomers with combined high mechanical strength and good elasticity. Herein, a simple strategy to develop high-performance elastomers that integrate high mechanical strength, enormous stretchability, good resilience, and healability is reported. Through simply complexing poly(acrylic acid) and poly(ethylene oxide) based on hydrogen-bonding interactions, transparent composite materials that perform as elastomers are generated. The as-prepared elastomers exhibit mechanical strength (true strength at break) and toughness (fracture energy) as high as 61 MPa and 22.9 kJ/m², respectively, and they can be stretched to >35 times their initial length and are able to return to their original dimensions following the removal of stress. Further, the elastomers are capable of healing from physical cuts/damages in a humid environment because of reformation of the reversible hydrogen bonds between the polymer components. The high mechanical strength of the elastomers is ascribed to the high degree of polymer chain entanglements and multiple hydrogen-bonding interactions in the composites. The reversible hydrogen bonds, which act as cross-linkages, facilitate the unfolding and sliding of the polymer chains in the composites, thereby endowing the elastomers with good elasticity and healability. Furthermore, flexible conductors with water-enabled healability were developed by drop-casting Ag nanowires on top of the elastomers.

Hydrogen-Bonded Polymer Complex Thin Film of Poly(2-oxazoline) and Poly(acrylic acid)

The hydrogen-bonded polymer complex thin film of poly(2-ethyl-2-oxazoline) (PEOX) and poly(acrylic acid) (PAA) was fabricated with layer-by-layer (LbL) assembly. The film shows exponential growth at early stage and transfers to linear growth after 10 assembling cycles, and the stable thickness increment per assembling cycle in the linear region could be higher than 100 nm. The film growth should be related with polymer chain diffusion during LbL assembly. The effects of assembling time, rinsing time, temperature, pH value, concentration and molecular weight on the thin film growth were investigated. Increasing the assembly time, the temperature and the concentration is favorable to produce the thick film. Prolonging rinsing time is good for preparing smooth film. The film can be constructed below pH 4.5 while the prepared film will not completely dissolve until pH value elevates to 7.0. Molecular weight has a subtle effect on the PEOX/PAA film growth. The PEOX-PAA pair that has a big molecular weight contrast shows fast film growth in the linear region.

Highly Elastic Fibers Made from Hydrogen-Bonded Polymer Complex

In this letter, we put forward an approach to prepare hydrogen-bonded complex fibers. First, a spinnable fluid is obtained by restricting hydrogen bonds, and then it is extruded through a spinneret into a coagulation bath where hydrogen bonds are built to induce fiber formation. The hydrogen-bonded poly(acrylic acid)/poly(ethylene oxide) (PAA/PEO) complex was prepared into fibers. PAA/PEO fiber shows excellent elastic behavior and can be drawn to more than 12× its original length without breaking, which is much higher than Spandex fiber or natural rubber fiber. In the fiber, PAA and PEO are miscible in the molecular level. Dynamic hydrogen bonding between PAA and PEO restricts the crystallization of PEO, retains flexibility of polymer chains, and also provides recovery forces when removing stress.

Dynamics of the layer-by-layer assembly of a poly(acrylic acid)-lanthanide complex colloid and poly(diallyldimethyl ammonium)

Poly(acrylic acid) (PAA) and lanthanide (Ln) ions, such as Ce(3+), Eu(3+), and Tb(3+), were prepared as dispersed complex colloidal particles through three different protocols with rigorous control of the pH value and mixing ratio. The negatively charged PAA-Ln complex particles were layer-by-layer (LbL) assembled with positively charged poly(diallyldimethyl ammonium) (PDDA) to prepare a thin film. The film thickness growth is much quicker than PDDA/PAA film. Due to the incorporation of Ln(3+) ions, the film exhibits fluorescence. During LbL assembly, PDDA-PAA association based on electrostatic force and PAA-Ce association based on coordination are in competition, which leads to the LbL assembly of PDDA and PAA-Ln complex colloidal particles being a complicated dynamic process.

Interface-enforced complexation between copolymer blocks

Binary diblock copolymers and corresponding ternary miktoarm stars are studied at oil-water interfaces. All polymers contain oil-soluble poly(propylene oxide) PPO, water-soluble poly(dimethylaminoethyl methacrylate) PDMAEMA and/or poly(ethylene oxide) PEO. The features of their Langmuir compression isotherms are well related to the ones of the corresponding homopolymers. Within the Langmuir-trough, PEO-b-PPO acts as the most effective amphiphile compared to the other PPO-containing copolymers. In contrast, the compression isotherms show a complexation of PPO and PDMAEMA for PPO-b-PDMAEMA and the star, reducing their overall amphiphilicity. Such complex formation between the blocks of PPO-b-PDMAEMA is prevented in bulk water but facilitated at the interface. The weakly-interacting blocks of PPO-b-PDMAEMA form a complex due to their enhanced proximity in such confined environments. Scanning force microscopy and Monte Carlo simulations with varying confinement support our results, which are regarded as compliant with the mathematical random walk theorem by Pólya. Finally, the results are expected to be of relevance for e.g. emulsion formulation and macromolecular engineering.

Reversible swelling-shrinking behavior of hydrogen-bonded free-standing thin film stabilized by catechol reaction

Dopamine-modified poly(acrylic acid) (PAA-dopa) and poly(vinylpyrrolidone) (PVPON) was layer-by-layer (LbL) assembled to prepare thin film based on hydrogen bonding. The carboxylic group of acrylic acid and the phenolic hydroxyl group of dopamine can both act as hydrogen bond donors. The critical assembly and the critical disintegration pH values of PVPON/PAA-dopa film are enhanced compared with PVPON/PAA film. The hydrogen-bonded PVPON/PAA-dopa thin film can be cross-linked via catechol chemistry of dopamine. After cross-linking, the film can be exfoliated from the substrate in alkaline solution to get a free-standing film. Moreover, by tuning the pH value, deprotonation and protonation of PAA will make the hydrogen bond in the film break and reconstruct, which induces that the free-standing film has a reversible swelling-shrinking behavior.