Tenderness in meat and meat alternatives: Structural and processing fundamentals

The demand for meat alternatives based on ingredients sourced from nonanimal materials with equivalent quality of muscle tissue is increasing. As more consumers switch to meat alternatives, a growing body of research has investigated the tenderness and related texture attributes in plant-based meats to increase consumer acceptance. A deeper understanding of tenderness including the differences and similarities between meat and meat alternatives is crucial to developing products that meet consumer expectations, as it directly influences consumer acceptance. Meat tenderness is commonly quantified using sensory evaluation and instrumental tests and is influenced by various factors such as the intrinsic features of the animal before the slaughter, naturally occurring proteolysis during the post-slaughter process, and several tenderization techniques. In contrast, meat alternative tenderness can be actively tailored through the selection of ingredients and the operating conditions of the structuring process. Especially, extrusion parameters such as moisture content and barrel temperature can greatly modulate tenderness-related attributes. Postprocessing methods that have traditionally been utilized for tenderizing have also been applied to meat alternatives, but more studies are needed to fully reveal the underlying mechanisms. This review offers an overview and critical discussion on tenderness, covering the structural origins, influencing factors, analytical methods, oral processing, and tenderization processes for both meat and meat alternatives. The discussion is based on the existing knowledge of muscle tissue, which evolves to critically reviewing how this understanding can be applied to the textural attributes of meat alternatives and what kind of novel tenderization techniques can be developed for these new sustainable food products.

The Impact of Genetic and Non-Genetic Factors on Lamb Loin Shear Force

Shear force is commonly used to evaluate tenderness, one of the most crucial eating quality aspects of sheep meat. The effect size of various factors on tenderness is still unknown. Studies have suggested that both genetic and environmental factors contribute to the variation in meat tenderness, and there are possible interactions between these factors. An extensive data set (n = 23,696) was analyzed to examine genetic and non-genetic influences on the shear force at 5 days postmortem (SF5). SF5 was measured on lamb loins (Longissimus lumborum) taken from lambs reared over 12 years at eight sites across Australia. The results showed that all carcass traits had a significant (p < 0.001) impact on SF5, with the largest effect on SF5 associated with intramuscular fat (IMF %) (f = 1035). There was also a significant effect of sex, cold shortening at 18 °C, sire type and cohort on SF5 (p < 0.001), with a large variation observed between the minimum cohort at 15.9 ± 1.5 N and maximum at 51.2 ± 2.1 N. In conclusion, a complex matrix of production, processing and genetic factors impact lamb tenderness as measured by shear force. This experiment helps identify the size of the contribution of these factors towards lamb tenderness, enabling the sheep industry to enhance consumers' satisfaction.

Carcass Characteristics and Beef Quality of Young Grass-Fed Angus x Salers Bovines

To characterize carcass and meat attributes, such as beef eating quality in specific farming conditions, 31 young grass-fed crossbred Angus x Salers cattle in two farming systems (a mono-cattle system versus a mixed system with beef cattle and sheep) were used in this study. Three muscle cuts (striploin—m. longissimus dorsi et thoracis; bolar blade—m. triceps brachii caput longum; internal flank plate—m. obliquus internus abdominis) were used for consumer eating quality testing and striploin was used for panelist eating quality assessment, and objective measurements [Warner–Bratzler shear force (WBSF) and fatty acid (FA) and antioxidant contents]. Results indicated that the farming system had no impact on carcass characteristics or meat quality, but it tended to affect FA content, which is likely explained by between-system differences in animal maturity (assessed by ossification score). Animal gender had significant effects on three eating quality traits evaluated by untrained consumers, with higher flavor liking, overall liking, and overall meat eating quality (MQ4) scores in females than in males. Additionally, FA contents were correlated with sensory quality traits to varying extents: consumer-scored tenderness, flavor, and overall liking were mainly positively correlated with ω-3 and ω-6 polyunsaturated fatty acid (PUFA) contents, and panelist-evaluated tenderness and abnormal flavor were more positively correlated with total lipids, saturated fatty acid (SFA), and monounsaturated fatty acid (MUFA) contents. Overall, this study showed that specific grass-fed crossbred Angus x Salers cattle can produce lean meat rich in ω-3 PUFAs with a low ω-6/ω-3 ratio and with “better than average” beef eating quality.

Prediction of carcass composition and meat and fat quality using sensing technologies: A review

Consumer demand for high-quality healthy food is increasing, &nbsp;thus meat processors require the means toassess these rapidly, accurately, and inexpensively. Traditional methods forquality assessments are time-consuming, expensive, invasive, and have potentialto negatively impact the environment. Consequently, emphasis has been put onfinding non-destructive, fast, and accurate technologies for productcomposition and quality evaluation. Research in this area is advancing rapidlythrough recent developments in the areas of portability, accuracy, and machinelearning. The present review, therefore, critically evaluates and summarizes developmentsof popular non-invasive technologies (i.e., from imaging to spectroscopicsensing technologies) for estimating beef, pork, and lamb composition andquality, which will hopefully assist in the implementation of thesetechnologies for rapid evaluation/real-timegrading of livestock products in the nearfuture.

The use of conventional laboratory-based methods to predict consumer acceptance of beef and sheep meat: A review

Meat scientists often use objective, laboratory-based methods to understand the sensorial properties of red meat. These approaches are advantageous because of their reproducibility, low cost, rapid generation of data and technical ease - comparative to large scale consumer sensory panels. To enhance the value of these methods, effort has been applied to identify specific limits or thresholds that correspond to a consumer's acceptance or satisfaction with the quality of a meat product. From the literature, we observe there to be inconsistencies in these thresholds. This could stem from disparate laboratory methods, consumer panel procedures and demographics, the approach to statistical analysis, sample type and representativeness, and more. This paper aimed to review consumer thresholds, proposed in the literature, to provide insight into their validity and transferability to other studies. Investigations were limited to red meat (beef and sheep meat) and to non-spectroscopic methods that have been used to predict consumer acceptance of colour, tenderness, juiciness, flavour and overall liking.

Effect of hay with or without concentrate or pellets on growth performance and meat quality of Ujimqin lambs on the Inner Mongolian Plateau

This study aimed to evaluate growth performance and meat quality of Ujimqin lambs fed native grass hay without or with concentrate (HC) or pellets. Ninety non-castrated 6-month-old male lambs of good health and similar body weight (26.83 ± 0.26 kg) were randomly divided into three groups (five lambs per cage). The average daily gain and intake of the pellets and HC groups were significantly greater (p < .05) than those in the hay group. The carcass weight, net meat mass, loin eye area, and backfat thickness were significantly greater (p < .05) in the HC groups. The intramuscular fat was significantly greater (p < .05) in the pellets and HC groups, while the shear force was significantly decreased (p < .05) in pellets and HC groups. The C16:0, C18:0, C18:1n9c, and C18:2n6 contents were significantly greater (p < .05) in the HC and pellet groups, while the C18:3n3 content was significantly greater (p < .05) in the hay group. Collectively, the present study suggested that feeding native grass hay with concentrate or pellets improved the growth in lambs.

Collagen, intramuscular fat and proteolysis affect Warner-Bratzler shear-force of muscles from Bos taurus breed types differently at weaning, after backgrounding on pasture, and after feedlotting

Context The texture of beef is highly important for the eating experience, and there is a continued interest in understanding the biochemical basis for the variation in texture between cattle and their meat cuts in order to improve and minimise variation in tenderness due to production and processing factors. Aims The present study aimed to investigate the impact of characteristics of meat on Warner-Bratzler shear-force (WBSF) as an indicator of texture of beef as affected by breed type, age/feeding phase, and muscle. Methods Seventy-five steers of three breed types (Angus, Hereford and Wagyu × Angus) were slaughtered after weaning 6 months old (n = 15), after backgrounding 17 months old (n = 30) and after feedlotting 25 months old (n = 30). At slaughter three muscles (M. supraspinatus, M. semitendinosus and M. longissimus lumborum) were sampled from each steer, and pH, intramuscular fat and collagen content, sarcomere length, and proteolysis (desmin degradation) were measured and used to explain the variation in WBSF after 7 and 14 days of aging. Key results Meat from Hereford and Angus steers had higher WBSF after 7 days of aging compared with Wagyu × Angus steers, but after 14 days of aging there was only a difference between Hereford and Wagyu × Angus in the M. supraspinatus and M. semitendinosus. The WBSF of the young weaned steers and steers slaughtered after backgrounding were dependent on the degree of proteolysis in the muscles, whereas for steers slaughtered after feedlotting the content of collagen was more important for the WBSF. The amount of intramuscular fat had a significant impact on the differences in WBSF within the specific muscle studied. In contrast to the general dogma that WBSF increase with age, WBSF decreased in M. semitendinosus and M. longissimus lumborum from the weaned 6-month-old steers to the 25-month-old steers finished in feed-lot, whereas in M. supraspinatus the older feed-lot finished steers had a higher WBSF. Conclusion The factors contributing to the Warner-Bratzler shear force of beef depends on the age/feeding phase of the animal and the muscle and less on the breed type. Implications Optimisation of texture in beef through breeding and production should address different traits dependent on the age/feeding phase of the slaughter animal.

N,N'-Diphenylthiourea electrochemical sensor for the detection of l-glutamate and Aspartate in beef

This study was conducted to design an electrochemical sensor for detection of l-glutamate (L-Glu) and Aspartate (Asp), which contribute largely to the umami taste of beef. Using N, N'-diphenylthiourea (DPTU), polypyrrole (PPy), and polyvinyl chloride (PVC), a composite electrode (DPTU/PVC/PPy/Pt) was prepared for rapidly electrochemical detection of l-Glu and Asp. The surface morphology of the synthesized functionalized electrode was characterized by Field Emission Scanning Electron Microscopy (FESEM). Potentials of umami amino acids accounted for 97.8%, while six interferential amino acids existed. The linear correlation between the content of l-Glu and Asp in beef broth was studied under different treatment conditions. The sensor compared with an amino acid analyzer well detected the contents of l-Glu and Asp in beef broths, with a coefficient of 0.991 in Pearson correlation analysis and an accuracy of 88.9%. The proposed electrochemical sensor showed good concurrence with previously reported methods and was effectively employed for the quantification of l- Glu and Asp in beef. PRACTICAL APPLICATION: The sensor exhibits the good performance with high stability and high accuracy. And it is a potential sensing platform with good reproducibility, making the proposed method suitable and reliable for routine analysis of L-Glu and Asp in beef. This method was proved promising for quantitative detecting amino acids in beef.

Effect of Kisspeptin-54 immunization on performance, carcass characteristics, meat quality and safety of Yiling goats

This study aimed to evaluate the effects of kisspeptin-54 immunocastration vaccine on performance, carcass characteristics, meat quality, and safety of Yiling goats. Thirty buck goats were randomly assigned into three groups: PVAX-B2L-Kisspeptin-54-asd immunized (PBK-asd), control, and surgically castrated. PBK-asd immunization significantly stimulated serum anti-kisspeptin antibody production and reduced testosterone hormone compared with the control group (p < .05). Interestingly, PBK-asd plasmid did not integrate into the host genome and had no significant effect on growth hormone, body weight, and average daily gain (ADG). Conversely, surgical castration significantly reduced ADG and carcass weight compared to the control group. Furthermore, PBK-asd immunization did not affect carcass characteristics (dressing percentage, loin area, and fat thickness) and meat quality traits (pH, color, cooking loss, drip loss, and shearing force). These results indicate that the Kisspeptin-54 DNA vaccine is safe and has potential to be used as an alternative to surgical castration for goats without negatively affecting carcass and meat quality.

Understanding consumer liking of beef using hierarchical cluster analysis and external preference mapping

BACKGROUND

This study was conducted to assess whether there are differences in consumer liking of beef. Samples were collected from different groups and analyses were conducted, including quantitative descriptive analysis, consumer panels and instrumental analyses. Palatability traits, such as aroma liking, tenderness, juiciness, flavour liking and overall liking (OL), were rated by consumers.

RESULTS

Warner-Bratzler shear force was negatively associated with tender mouthfeel and consumer tenderness score. Cluster analysis identified four groups of clusters, which were described as 'easily pleased', 'bull beef liker', 'tender beef liker' and 'fastidious' consumers. Cluster group 2 awarded a higher score for bulls and located in a separate region on the external preference map.

CONCLUSION

External preference mapping showed the association between consumer liking of beef and sensory attributes. © 2019 Society of Chemical Industry.

Genotypic and allelic effects of the myostatin gene (MSTN) on carcass, meat quality, and biometric traits in Colored Polish Merino sheep

The aim of this study was to identify polymorphisms in the first intron and c.*1232G>A position of the MSTN gene and analyze associations between the detected alleles/genotypes and carcass, meat quality, and biometric traits in Colored Polish Merino sheep. We analyzed 44 traits using the MIXED procedure of the SAS software. Five alleles (MSTN-A, MSTN-B, MSTN-C, MSTN-E and MSTN-E1) were detected. Significant genotypic effects were detected with regard to chest depth (live lamb) and fat depth over ribs, drip loss, subjective meat flavor and color, whereas significant allelic effects were found for chest depth (live lamb), pre-slaughter weight, hot carcass weight, cold carcass dressing out, leg depth (carcass), eye of loin width and area, intramuscular fat (IMF) content, water-holding capacity, and subjective meat tenderness, flavor and color. The results suggest MSTN gene polymorphisms may be considered a genetic marker of carcass quality, meat quality, and biometric traits in sheep.

Do extended transport times and rest periods impact on eating quality of beef carcasses?

The experiment tested the effect of four extended transport treatments on sensory and objective meat quality in beef. A total of 343 steers (88 steers from each of three properties and 79 from a fourth property) were allocated to four treatments including a 12 hour transport time (T12), 24 hour transport time (T24), 24 h as 12 hour transport time, a 12 hour rest, with a further 12 hour transport (T12 ~ T12), 36 hour transport treatment (T36). Within property departure times of treatments were staggered to arrive at the abattoir together. There were no significant transport effects (P > .05) on live animal, carcass traits, consumer sensory scores, and objective meat quality of the longissimus lumborum. There was large between property variation in the proportions of carcasses excluded from grading on the basis of low ribfat, high ultimate pH and dark meat color scores. Variation in these traits was not associated with transport treatments and was likely related to variation in on-farm factors.

Assessment of the meat quality of lamb M. longissimus thoracis et lumborum and M. triceps brachii following three different Halal slaughter procedures

A total of fifteen male and fifteen female lambs were allocated to three groups of ten animals and subjected to: traditional Halal slaughter without stunning (TNS); slaughter following electric head-only stunning (EHOS) or; post-cut electric head-only stun (PCEHOS) and their meat quality was determined. Instrumental and sensory analyses were carried out on two muscles; M. longissimus thoracis et lumborum (LTL) and M. triceps brachii (TB). Additionally, the effects of sex and muscle type were also assessed. No differences were found among slaughter methods for pH, drip loss and shear force. TB had a higher pHu and was more tender than LTL. Muscles from EHOS and PCEHOS lambs discoloured more quickly than TNS muscles. There were no differences in the measured sensory attributes, with the exception of EHOS meat being tougher than PCEHOS and TNS meat. This study showed that the three slaughter methods had no substantial effect on lamb meat quality.

A structural approach to understanding the interactions between colour, water-holding capacity and tenderness

The colour, water-holding capacity (WHC) and tenderness of meat are primary determinants of visual and sensory appeal. Although there are many factors which influence these quality traits, the end-results of their influence is often through key changes to the structure of muscle proteins and their spatial arrangement. Water acts as a plasticiser of muscle proteins and water is lost from the myofibrillar lattice structure as a result of protein denaturation and consequent reductions in the muscle fibre volume with increasing cooking temperature. Changes in the myofilament lattice arrangement also impact the light scattering properties and the perceived paleness of the meat. Causes of variation in the quality traits of raw meat do not generally correspond to variations in cooked meat and the differences observed between the raw muscle and cooked or further processed meat are discussed. The review will also identify the gaps in our knowledge and where further investigation would beneficial.

Heritability of beef tenderness at different aging times and across breed comparisons

Zwambag, A., Kelly, M., Schenkel, F., Mandell, I., Wilton, J. and Miller, S. 2013. Heritability of beef tenderness at different aging times and across breed comparisons. Can. J. Anim. Sci. 93: 307–312. The heritability of shear force at 7, 14 and 21 d was estimated from a crossbred population of beef cattle. The population consisted of approximately 1400 crossbred cattle that were predominantly the offspring of Angus, Simmental, Gelbvieh and Piedmontese sires bred to predominantly Angus and Simmental females. Significant breed effects on tenderness were found within each aging time and no effect of heterosis was detected. The heritability of shear force declined from 0.194 to 0.048 as aging time increased from 7 to 21 d, highlighting the effectiveness of aging as a tool to improve tenderness. The repeatability of shear force was also found to be moderate (0.53). However, as energy prices increase it may be attractive to reduce aging times, thus breeding animals that are more tender at shorter aging times would be beneficial. The heritability of tenderness found at shorter aging times would indicate that improvement in this trait would be possible within a population where phenotypes are available.

Chemical composition and meat quality attributes of indigenous sheep and goats from traditional production system in Tanzania

The aim of the study was to compare chemical composition and quality attributes of meat between male long fat tailed sheep (n = 17) and Small East African goats (n = 17) existing in Tanzania. Animals of 1.5 to 2 yrs in age and live body weight of 22.59±0.50 kg were purchased from livestock auction markets. Animals were fasted for 18 h and slaughtered according to standard halal procedure. Left carcasses were dissected into muscles, fat and bone and the muscle and fat were mixed together and chemically analysed. Meat quality attributes were measured based on Muscle longissimus thoracis et lumborum excised from right sides of carcasses. Goat carcasses had significant higher (p = 0.0302) moisture content (70.65% vs 66.96%) and lower (p = 0.0027) ether extract (2.49% vs 5.82%) than sheep but there was no significant species differences in protein and ash content. Sheep had lower (p = 0.0157) ultimate pH (5.74 vs 5.88) and higher (p = 0.0307) temperature (3.77°C vs 3.15°C) than goat carcasses. Sheep meat had lower (p = 0.0021) shear force values (29.83 N vs 34.07 N) than goat. Within species, at day 9 of ageing, meat tenderness improved (p = 0.0001) by 44.63% and 34.18% for sheep and goat. Pooled data showed that at d 9 of ageing, meat tenderness improved (p = 0.0001) by 39.25% (from 39.54 N to 24.02 N) compared to tenderness of meat which was not aged at day one of slaughter. The present study demonstrated the differences in chemical composition and quality attributes of meat existing between sheep and goats originated from East Africa.

Managing meat tenderness

This paper discusses the management of meat tenderness using a carcass grading scheme which utilizes the concept of total quality management of those factors which impact on beef palatability. The scheme called Meat Standards Australia (MSA) has identified the Critical Control Points (CCPs) from the production, pre-slaughter, processing and value adding sectors of the beef supply chain and quantified their relative importance using large-scale consumer testing. These CCPs have been used to manage beef palatability in two ways. Firstly, CCPs from the pre-slaughter and processing sectors have been used as mandatory criteria for carcasses to be graded. Secondly, other CCPs from the production and processing sectors have been incorporated into a model to predict palatability for individual muscles. The evidence for the importance of CCPs from the production (breed, growth path and HGP implants), pre-slaughter and processing (pH/temperature window, alternative carcass suspension, marbling and ageing) sectors are reviewed and the accuracy of the model to predict palatability for specific muscle×cooking techniques is presented.

Genetic mapping of quantitative trait loci for meat quality and muscle metabolic traits in cattle

A whole-genome scan was carried out in New Zealand and Australia to detect quantitative trait loci (QTL) for live animal and carcass composition traits and meat quality attributes in cattle. Backcross calves (385 heifers and 398 steers) were generated, with Jersey and Limousin backgrounds. The New Zealand cattle were reared and finished on pasture, whilst Australian cattle were reared on grass and finished on grain for at least 180 days. This paper reports on meat quality traits (tenderness measured as shear force at 4-5 ages on two muscles as well as associated traits of meat colour, pH and cooking loss) and a number of metabolic traits. For meat quality traits, 18 significant QTL (P < 0.05), located in nine linkage groups, were detected on a genome-wise basis, in combined-sire (seven QTL) or within-sire analyses (11 QTL). For metabolic traits, 11 significant QTL (P < 0.05), located in eight linkage groups, were detected on a genome-wise basis, in combined-sire (five QTL) or within-sire analyses (six QTL). BTA2 and BTA3 had QTL for both metabolic traits and meat quality traits. Six significant QTL for meat quality and metabolic traits were found at the proximal end of chromosome 2. BTA2 and BTA29 were the most common chromosomes harbouring QTL for meat quality traits; QTL for improved tenderness were associated with Limousin-derived and Jersey-derived alleles on these two chromosomes, respectively.

Constraints on establishing threshold levels for Warner - Bratzler shear-force values based on consumer sensory ratings for seven beef muscles

Steaks (n = 560) from US Department of Agriculture (USDA) Choice and Select, including M. gluteobiceps, M. gluteus medius, M. infraspinatus, M. longissimus lumborum, M. rectus femoris, M. triceps brachii and M. vastus lateralis, were evaluated for palatability characteristics and tenderness acceptability by a central-location consumer panel (n = 205 consumers) and Warner–Bratzler shear (WBS) analysis to determine whether threshold values could be identified for these muscles. There were significant interactions for muscle × USDA quality grade for sensory-panel overall like and WBS values. In general, USDA quality grade affected overall like and WBS values for the M. gluteobiceps and M. rectus femoris, but no real differences due to grade were found for the rest of the muscles studied, except for the WBS values for the M. gluteus medius. Regardless of USDA quality grade, the M. infraspinatus had the lowest (P < 0.05) WBS values and was comparable (P > 0.05) in overall like ratings to the M. longissimus lumborum. Percentage of muscles that would be expected to have a tenderness rating ‘slightly tender’ or higher on the basis of WBS values at the 95% confidence interval ranged from 40% for the M. vastus lateralis to 100% for the M. infraspinatus. There were no clear threshold levels for WBS values that would correspond to certain tenderness like ratings, possibly because of the narrow range of tenderness observed within each muscle. For the muscles studied, how consumers rated them appeared to be independent of the WBS values and may make it difficult to develop WBS thresholds for predicting consumer acceptability of these muscles.

Cattle temperament: persistence of assessments and associations with productivity, efficiency, carcass and meat quality traits

Relationships between temperament and a range of performance, carcass, and meat quality traits in young cattle were studied in 2 experiments conducted in New South Wales (NSW) and Western Australia (WA), Australia. In both experiments, growth rates of cattle were assessed during backgrounding on pasture and grain finishing in a feedlot. Carcass and objective meat quality characteristics were measured after slaughter. Feed intake and efficiency during grain finishing were also determined in NSW. Brahman (n = 82 steers and 82 heifers) and Angus (n = 25 steers and 24 heifers) cattle were used in the NSW experiment. In NSW, temperament was assessed by measuring flight speed [FS, m/s on exit from the chute (crush)] on 14 occasions, and by assessing agitation score during confinement in the crush (CS; 1 = calm to 5 = highly agitated) on 17 occasions over the course of the experiment. Brahman (n = 173) and Angus (n = 20) steers were used in the WA experiment. In WA, temperament was assessed by measuring FS on 2 occasions during backgrounding and on 2 occasions during grain feeding. At both sites, a hormonal growth promotant (Revalor-H, Virbac, Milperra, New South Wales, Australia) was applied to one-half of the cattle at feedlot entry, and the Brahman cattle were polymorphic for 2 calpain-system markers for beef tenderness. Temperament was not related (most P > 0.05) to tenderness gene marker status in Brahman cattle and was not (all P > 0.26) modified by the growth promotant treatment in either breed. The Brahman cattle had greater individual variation in, and greater correlations within and between, repeated assessments of FS and CS than did the Angus cattle. Correlations for repeated measures of FS were greater than for repeated assessments of CS, and the strength of correlations for both declined over time. Average FS or CS for each experiment and location (NSW or WA × backgrounding or finishing) were more highly correlated than individual measurements, indicating that the average values were a more reliable assessment of cattle temperament than any single measure. In Brahman cattle, increased average FS and CS were associated with significant (P < 0.05) reductions in backgrounding and feedlot growth rates, feed intake and time spent eating, carcass weight, and objective measures of meat quality. In Angus cattle, the associations between temperament and growth rates, feed intake, and carcass traits were weaker than in Brahmans, although the strength of relationships with meat quality were similar.

Genetics of meat quality and carcass traits and the impact of tenderstretching in two tropical beef genotypes

Meat quality and carcass traits were measured for 2180 feedlot finished Brahman (BRAH) and Tropical Composite (TCOMP) steers to investigate genetic and non-genetic influences on shear force, and other meat quality traits. Genetic and phenotypic correlations were estimated between carcass and meat quality traits, and with live animal measurements collected in steers from weaning to feedlot exit, and their heifer half-sibs up to their first mating, which were managed in Australia’s tropical or subtropical environments. Left sides of carcasses were tenderstretched (hung by the aitch-bone) while right sides were conventionally hung (by the Achilles tendon). Tenderstretching reduced mean shear force by 1.04 kg, and phenotypic variance by 77% of that observed in conventionally hung sides. Genotype differences existed for carcass traits, with TCOMP carcasses significantly heavier, fatter, with greater eye muscle area, and lower retail beef yield than BRAH. TCOMP had lower shear force, and higher percent intramuscular fat. Meat quality and carcass traits were moderately heritable, with estimates for shear force and compression of 0.33 and 0.19 for BRAH and 0.32 and 0.20 for TCOMP respectively. In both genotypes, estimates of heritability for carcass traits (carcass weight, P8 and rib fat depths, eye muscle area and retail beef yield) were consistently moderate to high (0.21 to 0.56). Shear force and compression were genetically correlated with percent intramuscular fat (r g = –0.26 and –0.57, respectively), and meat colour (r g = –0.41 and –0.68, respectively). For TCOMP, lower shear force was genetically related to decreased carcass P8 fat depth (r g = 0.51). For BRAH steers and heifers measured at pasture, fatness traits and growth rates were genetically correlated with shear force, although the magnitude of these relationships varied with time of measurement. Net feed intake was significantly genetically correlated with carcass rib fat depth (r g = 0.49), eye muscle area (r g = –0.42) and retail beef yield (r g = –0.61). These results demonstrate that selection to improve production and carcass traits can impact meat quality traits in tropically adapted cattle, and that genotype specific evaluations will be necessary to accommodate different genetic relationships between meat quality, carcass and live animal traits.

Consumer assessment of eating quality - development of protocols for Meat Standards Australia (MSA) testing

Meat Standards Australia sought a consistent measure of the beef eating experience to the consumer. Rather than objective measurements or trained panel sensory assessment, it was decided to proceed with direct consumer assessment. Consumer-based assessment has much greater variation, but it has the decided advantage of validity. This paper summarises the path taken to obtain consistent consumer assessment. What meat samples to present to consumers? What responses to ask for? What to do with these responses when they were obtained? The answers to these questions have led to the MQ4 measure of consumer assessment of meat eating quality, which now forms the basis of the MSA predictive model.

An evaluation of slaughter age on the profitability of intensive slaughter ostrich production

The traditional slaughter ostrich production system evolved mainly around two aspects: producing the optimum skin size and attaining the ideal shape of follicle on the skin. Over time the practice of slaughtering ostriches at 14 months of age proved to be the ideal system and became the standard in the ostrich industry. With a gradual increase in demand for ostrich meat in the past decade, the meat yielded by a 14-month-old bird provided additional income to the producer. However, the cost of feed can affect profitability and, especially so, for a production system over a 14-month period. In addition to increasing feed costs, evidence exists of an increasing risk of skin damage over long production periods, affecting income negatively. A study at the Kromme Rhee experimental farm near Stellenbosch in South Africa investigated slaughter age regimes at 8.5 months, 10.5 months, 12.5 months, 14.5 months and 16.5 months. Data on feed intake and yields of cold carcass, crust skin size, skin grade and total feathers revealed significant differences (P < 0.01) at different slaughter ages. This paper attempts to assess the effect of different slaughter age regimes on the profitability of intensive slaughter ostrich production. Values predicted from a regression analysis were imputed into a gross margin budget analysis and discounted over a 5-year planning period to compare profitability over the long-term. Income was highest at the 14.5-month slaughter system but gross margin of the 10.5-month slaughter age system was highest, with the 8.5-month system second. Changes in the slaughter age regimes in the ostrich industry may increase efficiency in production systems.

Regrouping unfamiliar animals in the weeks prior to slaughter has few effects on physiology and meat quality in Bos taurus feedlot steers

The response of cattle to alterations in social groupings can lead to physiological changes that affect meat quality. Feedlot practices frequently lead to a proportion of cattle in a pen being drafted for slaughter with the balance retained for a further period until they meet market specifications. An ability to regroup such retained cattle for short periods without consequences for meat quality would facilitate efficient use of feedlot pen space. The current experiment examined the impact on physiological variables and meat quality of regrouped British breed steers 4, 2 or 1 week before dispatch for slaughter. There was little effect of regrouping cattle on physiological variables associated with stress responses. Physical assessment of meat quality indicated that regrouping steers 1 week before slaughter led to higher compression and a tendency for higher peak force values in animals from one genotype than in their respective controls (1.89 v. 1.71 ± 0.05 kg, P = 0.017); however, these assessments were not matched by changes in sensory perception of meat quality. Average daily gain during feedlot finishing was negatively related to the temperament measure and flight time. It was also associated with breed, white cell count, plasma cortisol and haemoglobin at the midpoint of the 70-day finishing period. The results confirm the impact of flight time on growth rate during feedlot finishing and that regrouping cattle less than 2 weeks before slaughter may reduce meat quality.

Effect of different post-weaning growth paths on long-term weight gain, carcass characteristics and eating quality of beef cattle

The effects of post-weaning nutrient restriction on growth, carcass characteristics and beef quality were determined. Belmont Red weaner steers (n = 100) were allocated to an initial slaughter group and 3 treatment groups of 120 days duration: rapid growth, slow growth and weight loss. The average daily gain of the groups were (mean ± s.e.): 0.81 ± 0.02, 0.29 ± 0.02 and –0.22 ± 0.01 kg/day, for the rapid growth, slow growth and weight loss groups, respectively. At the end of the treatment period, rapid growth steers had significantly (P<0.05) heavier carcasses, higher dressing percentages and greater bone mineral contents than those from the weight loss group. Steers from each group were realimented for 192 days at pasture. Average daily gains during this period were 0.39 ± 0.03, 0.52 ± 0.04 and 0.61 ± 0.05 kg/day for the rapid growth, slow growth and weight loss groups, respectively. Ten animals from the rapid growth group were then slaughtered to determine carcass characteristics. The remaining steers were finished at pasture for a further 409 days. During this period there was no significant difference in average daily gain between treatment groups. Steers from the rapid growth group had a significantly greater final weight (531 ± 16.8 kg) compared with weight loss steers (481 ± 14.0 kg). Carcass characteristics, eye muscle area, bone mineral content and objective measures of meat quality for the M. longissimus dorsi and M. semitendinosus did not differ significantly between groups. Shear peak force values for cooked M. longissimus dorsi samples were not significantly different between groups. Clipped meat quality scores for M. longissimus dorsi samples, as assessed by Meat Standards Australia, were not significantly different between treatment groups and indicated consumer acceptability. It was concluded that nutrient restriction in the immediate post-weaning period followed by pasture realimentation did not influence final carcass characteristics or beef quality.

Relationship between animal age, intramuscular fat, cooking loss, pH, shear force and eating quality of aged meat from sheep

The relationships between sensory traits (tenderness, juiciness, flavour and overall liking) and objective measures, such as shear force, intramuscular fat, cooking loss, pH and animal age, were derived for M. longissimus thoracis et lumborum (LL) from 471 lamb and sheep carcasses. Tenderness could be predicted with the most accuracy (R2 = 0.24) and flavour with the highest precision (r.s.d. = 7.5 units) when using the objective measures, which may be in part due to the small variation in the range of shear force values of the samples (all carcasses electrically stimulated and meat aged for 5 days) and the use of consumer panels for the assessment of sensory traits. The ultimate pH of the LL, the rate of decline in pH in the LL or the predicted temperature at pH 6.0 were not significant predictors of the sensory traits when tested on a subsample of the carcasses. The model coefficients indicated that all sensory traits (tenderness, flavour, juiciness and overall liking) declined as shear force and age increased, and as intramuscular fat percentage decreased. This translated into a decline of 16 points on average for tenderness and 13 points for overall liking when LL samples from 68.5-month-old sheep were compared with those from unweaned lambs, when adjusted to the same level of intramuscular fat and shear force. Predictions of the sensory traits at varying levels of shear force were made and show that at 49 Newtons (N), the overall liking score would be 51 and the tenderness score 48. Derived relationships between objective meat quality measures and sensory traits suggest that to achieve a failure rate of no more than 10% for loin meat when eaten, it must have a shear force of about 27 N or less.

The effect of lairage time on consumer sensory scores of the M. longissimus thoracis et lumborum from lambs and lactating ewes

The aim of this study was to determine whether lairage time influenced consumer sensory scores of the eating quality of lamb and mutton. Commercial consignments of lambs and ewes were subjected to 3 different lairage periods (slaughter on arrival, slaughter after 1 day or slaughter after 2 days in lairage) at one site in Victoria (experiment 1) and another site in Western Australia (experiment 2). In experiment 1, 3 sucker and 3 carry-over lamb consignments, each consisting of 36 lambs, were sourced from a public saleyard. In experiment 2, 3 ewe and 3 lamb consignments, each consisting of 150 animals were sourced directly from the farm of origin. There was no primary effect of lairage time on consumer sensory scores of the M. longissimus et lumborum from either lambs or ewes at the 2 locations. Sucker lambs were tenderer than carry-over lambs in experiment 1. There was an interaction between age class and lairage time for tenderness in experiment 2, such that lamb meat was tenderer than ewe meat when slaughtered after 1 day in lairage. Ewes produced loins with shorter (0.6 µm, P<0.05) sarcomere length, higher (4.9%, P<0.05) intramuscular fat percentage and darker (P<0.05) meat colour compared with those from sucker lambs. Hue angle was higher (2°, P<0.01) for meat from sheep killed after 1 day in lairage compared with meat from sheep killed on arrival or after 2 days in lairage in both experiments.

The impact of processing on sensory and objective measurements of sheep meat eating quality

The impact of processing factors on sheep meat eating quality was investigated in an experiment in which stimulation (stimulation and no stimulation), chilling rate (fast and slow chilling) and carcass suspension (tenderstretch and normally hung by Achilles tendon) treatments were overlaid on 80 lamb and 40 mutton carcasses processed over 2 days, at 2 different abattoirs. Within each carcass, 3 muscles (M. longissimus thoracics et lumborum, biceps femoris and serratus ventralis) were collected from both sides and aged for 2 of 3 ageing periods (2, 5 or 14 days), before sensory testing for tenderness, juiciness, like flavour and overall liking, using a consumer taste panel. Processing treatments of stimulation and chilling were variable in their effect on the rates of pH and temperature decline and temperature at pH 6 (temp@pH6), between the 4 slaughter groups. Therefore chilling rate and electrical stimulation were considered as tools by which temp@pH6 could be manipulated, rather than as treatment effects per se. Age category (lamb or mutton) had the largest impact on tenderness score, followed by muscle, ageing and carcass suspension. There were significant interactions for tenderness and overall liking scores between muscle × ageing, age category × muscle and carcass suspension × muscle (P<0.05). The magnitude of the tenderstretch advantage in sensory scores was a function of temp@pH6. In normally hung carcasses, the highest sensory scores were evident at about 21°C temp@pH6, with a decrease in sensory scores at high (>30°C) or low (<10°C) temp@pH6. There was a tendency for sensory scores (particularly for the like flavour score) to decline for the biceps femoris when it was stored for extended periods (14 days).

Development of a sensory protocol for testing palatability of sheep meats

A total of 108 grill and 108 roast samples were prepared from lamb (n = 10) and mutton (n = 8) carcasses for sensory testing using a consumer taste panel. Grill and roast samples were prepared from the left and right sides of the carcass, respectively, using longissimus, biceps femoris, gluteus medius, serratus ventralis and semimembranosus. Due to size constraints, muscle from both sides was used to form grill samples for the vastus lateralis, and roast samples from the triceps brachii. Grill and roast samples were sensory tested using 360 untrained consumers. Each consumer was given a total of 6 experimental samples and each sample was tested by 10 different consumers. Sensory scores for tenderness, juiciness, like flavour and overall liking from both the grilled and roasted samples were highly correlated (P<0.05). For grilling, the different muscles were correlated for tenderness and overall liking scores (P<0.05), with the exception of the semimembranosus (P>0.05). In contrast, juiciness and like flavour scores were poorly correlated between grilled muscles. For the roasted samples, sensory scores were generally uncorrelated between muscles. The statistical significance of the age category and muscle effects was greater in grill samples, but stimulation effects were of similar significance using either cooking method. It was proposed that roasting reduced treatment effects that affected sensory via differences in connective tissue toughness, due to gelatinisation of connective tissue during cooking. For testing production and processing effects on palatability, grilling was more sensitive for detecting treatment effects, than roasting.

Estimated genetic parameters for palatability traits of steaks from Brahman cattle

Heritabilities and genetic and phenotypic correlations were estimated from carcass and beef palatability data collected from Brahman calves (n = 504) born in central Florida from 1996 to 2000. Traits evaluated included Warner-Bratzler shear force (after 7, 14, and 21 d of aging), panel tenderness score, connective tissue amount, juiciness, flavor intensity, and off flavor (after 14 d of aging), percentages of raw and cooked lipids, and milligrams per gram of muscle calpastatin activity. Parameters were estimated using an animal model and derivative-free restricted maximum likelihood procedures. Estimated heritabilities for d 7, 14, and 21 shear force were 0.14,0.14, and 0.06, respectively, indicating that improvement in these traits by selection would be slow. Estimated heritabilities of sensory panel attributes were 0.11, 0.12, 0.05, 0.04, and 0.01 for tenderness, connective tissue amount, juiciness, flavor intensity, and off flavor, respectively. The estimated heritabilities for percentages of raw and cooked lipids, and calpastatin activity were 0.34, 0.17, and 0.07, respectively. Most of the estimated genetic correlations among palatability traits and for palatability traits with fat thickness, marbling score, and loin muscle area were consistent with other estimates from the literature. Results indicated that improvement in tenderness based on selection for favorable shear force, sensory panel tenderness, or calpastatin activity would be slow; therefore, postslaughter intervention programs should also be considered.