DNA heterogeneity and phosphorylation unveiled by single-molecule electrophoresis

Ion-Solvent Interactions under Confinement Hold the Key to Tuning the DNA Translocation Speeds in Polyelectrolyte-Functionalized Nanopores

DNA sequencing and sensing using nanopore technology delves critically into the alterations in the measurable electrical signal as single-stranded DNA is drawn through a tiny passage. To make such precise measurements, however, slowing down the DNA in the tightly confined passage is a key requirement, which may be achieved by grafting the nanopore walls with a polyelectrolyte layer (PEL). This soft functional layer at the wall, under an off-design condition, however, may block the DNA passage completely, leading to the complete loss of output signal from the nanobio sensor. Whereas theoretical postulates have previously been put forward to explain the essential physics of DNA translocation in nanopores, these have turned out to be somewhat inadequate when confronted with the experimental findings on functionalized nanopores, including the prediction of the events of complete signal losses. Circumventing these constraints, herein we bring out a possible decisive role of the interplay between the inevitable variabilities in the ionic distribution along the nanopore axis due to its finite length as opposed to its idealized "infinite" limit as well as the differential permittivity of PEL and bulk solution that cannot be captured by the commonly used one-dimensional variant of the electrical double layer theory. Our analysis, for the first time, captures variations in the ionic concentration distribution across multidimensional physical space and delineates its impact on the DNA translocation characteristics that have hitherto remained unaddressed. Our results reveal possible complete blockages of DNA translocation as influenced by less-than-threshold permittivity values or greater-than-threshold grafting densities of the PEL. In addition, electrohydrodynamic blocking is witnessed due to the ion-selective nature of the nanopore at low ionic concentrations. Hence, our study establishes a functionally active regime over which the PEL layer in a finite-length nanopore facilitates controllable DNA translocation, enabling successful sequencing and sensing through the explicit modulation of translocation speed.

Portable nanopore-sequencing technology: Trends in development and applications

Sequencing technology is the most commonly used technology in molecular biology research and an essential pillar for the development and applications of molecular biology. Since 1977, when the first generation of sequencing technology opened the door to interpreting the genetic code, sequencing technology has been developing for three generations. It has applications in all aspects of life and scientific research, such as disease diagnosis, drug target discovery, pathological research, species protection, and SARS-CoV-2 detection. However, the first- and second-generation sequencing technology relied on fluorescence detection systems and DNA polymerization enzyme systems, which increased the cost of sequencing technology and limited its scope of applications. The third-generation sequencing technology performs PCR-free and single-molecule sequencing, but it still depends on the fluorescence detection device. To break through these limitations, researchers have made arduous efforts to develop a new advanced portable sequencing technology represented by nanopore sequencing. Nanopore technology has the advantages of small size and convenient portability, independent of biochemical reagents, and direct reading using physical methods. This paper reviews the research and development process of nanopore sequencing technology (NST) from the laboratory to commercially viable tools; discusses the main types of nanopore sequencing technologies and their various applications in solving a wide range of real-world problems. In addition, the paper collates the analysis tools necessary for performing different processing tasks in nanopore sequencing. Finally, we highlight the challenges of NST and its future research and application directions.

High-Voltage Biomolecular Sensing Using a Bacteriophage Portal Protein Covalently Immobilized within a Solid-State Nanopore

The application of nanopores as label-free, single-molecule biosensors for electrical or optical probing of structural features in biomolecules has been widely explored. While biological nanopores (membrane proteins and bacteriophage portal proteins) and solid-state nanopores (thin films and two-dimensional materials) have been extensively employed, the third class of nanopores known as hybrid nanopores, where an artificial membrane substitutes the organic support membrane of proteins, has been only sparsely studied due to challenges in implementation. G20c portal protein contains a natural DNA pore that is used by viruses for filling their capsid with viral genomic DNA. We have previously developed a lipid-free hybrid nanopore by "corking" the G20c portal protein into a SiN_x nanopore. Herein, we demonstrate that through chemical functionalization of the synthetic nanopore, covalent linkage between the solid-state pore and the G20c portal protein considerably improves the hybrid pore stability, lifetime, and voltage resilience. Moreover, we demonstrate electric-field-driven and motor protein-mediated transport of DNA molecules through this hybrid nanopore. Our integrated protein/solid-state device can serve as a robust and durable framework for sensing and sequencing at high voltages, potentially providing higher resolution, higher signal-to-noise ratio, and higher throughput compared to the more conventional membrane-embedded protein platforms.

Unveiling the Heterogenous Dephosphorylation of DNA Using an Aerolysin Nanopore

The simultaneous occurrence of multiple heterogeneous DNA phosphorylation statuses, which include 5' end phosphorylation, 5' end dephosphorylation, 3' end phosphorylation, and 3' end dephosphorylation, is crucial for regulating numerous cellular processes. Although there are many methods for detecting a single type of DNA phosphorylation, the direct and simultaneous identification of DNA phosphorylation/dephosphorylation on the 5' and/or 3' ends remains a challenge, let alone the unveiling of the heterogeneous catalysis processes of related phosphatases and kinases. Taking advantage of the charge-sensitive aerolysin nanopore interface, herein, an orientation-dependent sensing strategy is developed to enhance phosphorylation-site-dependent interaction with the nanopore sensing interface, enabling the direct and simultaneous electric identification of four heterogeneous phosphorylation statuses of a single DNA. By using this strategy, we can directly evaluate the heterogeneous dephosphorylation process of alkaline phosphatase (ALP) at the single-molecule level. Our results demonstrate that the ALP in fetal bovine serum preferentially catalyzes the 3' phosphate rather than both ends. The quantification of endogenous ALP activity in fetal bovine serum could reach the submilli-IU/L level. Our aerolysin measurements provide a direct look at the heterogeneous phosphorylation status of DNA, allowing the unveiling of the dynamic single-molecule functions of kinase and phosphatase.

Mapping the sensing spots of aerolysin for single oligonucleotides analysis

Nanopore sensing is a powerful single-molecule method for DNA and protein sequencing. Recent studies have demonstrated that aerolysin exhibits a high sensitivity for single-molecule detection. However, the lack of the atomic resolution structure of aerolysin pore has hindered the understanding of its sensing capabilities. Herein, we integrate nanopore experimental results and molecular simulations based on a recent pore structural model to precisely map the sensing spots of this toxin for ssDNA translocation. Rationally probing ssDNA length and composition upon pore translocation provides new important insights for molecular determinants of the aerolysin nanopore. Computational and experimental results reveal two critical sensing spots (R220, K238) generating two constriction points along the pore lumen. Taking advantage of the sensing spots, all four nucleobases, cytosine methylation and oxidation of guanine can be clearly identified in a mixture sample. The results provide evidence for the potential of aerolysin as a nanosensor for DNA sequencing.

Nanopores are an emerging powerful single-molecule method of DNA sequencing. Here the authors map the structure of aerolysin for use as a nanopore and show detection of modified and unmodified nucleobases.

Flow of DNA in micro/nanofluidics: From fundamentals to applications

Thanks to direct observation and manipulation of DNA in micro/nanofluidic devices, we are now able to elucidate the relationship between the polymer microstructure and its rheological properties, as well as to design new single-molecule platforms for biophysics and biomedicine. This allows exploration of many new mechanisms and phenomena, which were previously unachievable with conventional methods such as bulk rheometry tests. For instance, the field of polymer rheology is at a turning point to relate the complex molecular conformations to the nonlinear viscoelasticity of polymeric fluids (such as coil-stretch transition, shear thinning, and stress overshoot in startup shear). In addition, nanofluidic devices provided a starting point for manipulating single DNA molecules by applying basic principles of polymer physics, which is highly relevant to numerous processes in biosciences. In this article, we review recent progress regarding the flow and deformation of DNA in micro/nanofluidic systems from both fundamental and application perspectives. We particularly focus on advances in the understanding of polymer rheology and identify the emerging research trends and challenges, especially with respect to future applications of nanofluidics in the biomedical field.

DNA modulates solvent isotope effects in a nanopore

Here we investigate the modulation of solvent isotope effects by the entry of DNA molecules into individual α-haemolysin nanopores. Solvent isotope effects in D2O versus H2O were enhanced (kH/kD ≈ 1.6) compared to the bulk (kH/kD ≈ 1.2), except when the pore was most blocked (kH/kD ≤ 1.1).

Nanopore-based analysis of biochemical species

Biological nanochannels or nanopores play a crucial role in basic biochemical processes in cells. Artificial nanopores possessing dimensions comparable to the size of biological molecules and mimicking the function of biological ion channels are of particular interest with respect to the design of biosensors with a sensitivity that can go down to the fM level and even to single molecule detection. Nanopore-based analysis (NPA) is currently a new research field with fascinating prospects. This review (with 118 refs.) summarizes the progress made in this field in the recent 10 years. Following an introduction into the fundamentals of NPA, we demonstrate its potential by describing selected methods for sensing (a) proteins such as streptavidin, certain antibodies, or thrombin via aptamers; (b) oligomers, larger nucleic acids, or micro-RNA; (c) small molecules, (d) ions such as K(I) which is vital to the maintenance of life, or Hg(II) which is dangerous to health. We summarize the results and discuss the merits and limitations of the various methods at last. Graphical abstractSchematic of a signal-off system and a signal-on system in nanopore analysis. The effective diameter of nanopores decreases when targets undergo certain interactions with receptors attached on the inner surface of the nanopore. Correspondingly, the current will drop on appearance of the analyte. This is referred to as a "signal-off" system. Conversely, it is called a "signal-on" system.

Dendrimers in Nanoscale Confinement: The Interplay between Conformational Change and Nanopore Entrance

Hyperbranched dendrimers are nanocarriers for drugs, imaging agents, and catalysts. Their nanoscale confinement is of fundamental interest and occurs when dendrimers with bioactive payload block or pass biological nanochannels or when catalysts are entrapped in inorganic nanoporous support scaffolds. The molecular process of confinement and its effect on dendrimer conformations are, however, poorly understood. Here, we use single-molecule nanopore measurements and molecular dynamics simulations to establish an atomically detailed model of pore dendrimer interactions. We discover and explain that electrophoretic migration of polycationic PAMAM dendrimers into confined space is not dictated by the diameter of the branched molecules but by their size and generation-dependent compressibility. Differences in structural flexibility also rationalize the apparent anomaly that the experimental nanopore current read-out depends in nonlinear fashion on dendrimer size. Nanoscale confinement is inferred to reduce the protonation of the polycationic structures. Our model can likely be expanded to other dendrimers and be applied to improve the analysis of biophysical experiments, rationally design functional materials such as nanoporous filtration devices or nanoscale drug carriers that effectively pass biological pores.

Evaluating the applicability of the Fokker-Planck equation in polymer translocation: a Brownian dynamics study

Brownian dynamics (BD) simulations are used to study the translocation dynamics of a coarse-grained polymer through a cylindrical nanopore. We consider the case of short polymers, with a polymer length, N, in the range N = 21-61. The rate of translocation is controlled by a tunable friction coefficient, γ0p, for monomers inside the nanopore. In the case of unforced translocation, the mean translocation time scales with polymer length as <τ1> ∼ (N - Np)(α), where Np is the average number of monomers in the nanopore. The exponent approaches the value α = 2 when the pore friction is sufficiently high, in accord with the prediction for the case of the quasi-static regime where pore friction dominates. In the case of forced translocation, the polymer chain is stretched and compressed on the cis and trans sides, respectively, for low γ0p. However, the chain approaches conformational quasi-equilibrium for sufficiently large γ0p. In this limit the observed scaling of <τ1> with driving force and chain length supports the Fokker-Planck (FP) prediction that <τ> ∝ N/fd for sufficiently strong driving force. Monte Carlo simulations are used to calculate translocation free energy functions for the system. The free energies are used with the FP equation to calculate translocation time distributions. At sufficiently high γ0p, the predicted distributions are in excellent agreement with those calculated from the BD simulations. Thus, the FP equation provides a valid description of translocation dynamics for sufficiently high pore friction for the range of polymer lengths considered here. Increasing N will require a corresponding increase in pore friction to maintain the validity of the FP approach. Outside the regime of low N and high pore friction, the polymer is out of equilibrium, and the FP approach is not valid.

Single-particle electrophoresis in nanochannels

Electrophoretic mobilities and particle sizes of individual Hepatitis B Virus (HBV) capsids were measured in nanofluidic channels with two nanopores in series. The channels and pores had three-dimensional topography and were milled directly in glass substrates with a focused ion beam instrument assisted by an electron flood gun. The nanochannel between the two pores was 300 nm wide, 100 nm deep, and 2.5 μm long, and the nanopores at each end had dimensions 45 nm wide, 45 nm deep, and 400 nm long. With resistive-pulse sensing, the nanopores fully resolved pulse amplitude distributions of T = 3 HBV capsids (32 nm outer diameter) and T = 4 HBV capsids (35 nm outer diameter) and had sufficient peak capacity to discriminate intermediate species from the T = 3 and T = 4 capsid distributions in an assembly reaction. Because the T = 3 and T = 4 capsids have a wiffle-ball geometry with a hollow core, the observed change in current due to the capsid transiting the nanopore is proportional to the volume of electrolyte displaced by the volume of capsid protein, not the volume of the entire capsid. Both the signal-to-noise ratio of the pulse amplitude and resolution between the T = 3 and T = 4 distributions of the pulse amplitudes increase as the electric field strength is increased. At low field strengths, transport of the larger T = 4 capsid through the nanopores is hindered relative to the smaller T = 3 capsid due to interaction with the pores, but at sufficiently high field strengths, the T = 3 and T = 4 capsids had the same electrophoretic mobilities (7.4 × 10(-5) cm(2) V(-1) s(-1)) in the nanopores and in the nanochannel with the larger cross-sectional area.

Polymer translocation dynamics in the quasi-static limit

Monte Carlo (MC) simulations are used to study the dynamics of polymer translocation through a nanopore in the limit where the translocation rate is sufficiently slow that the polymer maintains a state of conformational quasi-equilibrium. The system is modeled as a flexible hard-sphere chain that translocates through a cylindrical hole in a hard flat wall. In some calculations, the nanopore is connected at one end to a spherical cavity. Translocation times are measured directly using MC dynamics simulations. For sufficiently narrow pores, translocation is sufficiently slow that the mean translocation time scales with polymer length N according to <τ> ∝ (N - N(p))(2), where N(p) is the average number of monomers in the nanopore; this scaling is an indication of a quasi-static regime in which polymer-nanopore friction dominates. We use a multiple-histogram method to calculate the variation of the free energy with Q, a coordinate used to quantify the degree of translocation. The free energy functions are used with the Fokker-Planck formalism to calculate translocation time distributions in the quasi-static regime. These calculations also require a friction coefficient, characterized by a quantity N(eff), the effective number of monomers whose dynamics are affected by the confinement of the nanopore. This was determined by fixing the mean of the theoretical distribution to that of the distribution obtained from MC dynamics simulations. The theoretical distributions are in excellent quantitative agreement with the distributions obtained directly by the MC dynamics simulations for physically meaningful values of N(eff). The free energy functions for narrow-pore systems exhibit oscillations with an amplitude that is sensitive to the nanopore length. Generally, larger oscillation amplitudes correspond to longer translocation times.

Stochastic detection of Pim protein kinases reveals electrostatically enhanced association of a peptide substrate

In stochastic sensing, the association and dissociation of analyte molecules is observed as the modulation of an ionic current flowing through a single engineered protein pore, enabling the label-free determination of rate and equilibrium constants with respect to a specific binding site. We engineered sensors based on the staphylococcal α-hemolysin pore to allow the single-molecule detection and characterization of protein kinase-peptide interactions. We enhanced this approach by using site-specific proteolysis to generate pores bearing a single peptide sensor element attached by an N-terminal peptide bond to the trans mouth of the pore. Kinetics and affinities for the Pim protein kinases (Pim-1, Pim-2, and Pim-3) and cAMP-dependent protein kinase were measured and found to be independent of membrane potential and in good agreement with previously reported data. Kinase binding exhibited a distinct current noise behavior that forms a basis for analyte discrimination. Finally, we observed unusually high association rate constants for the interaction of Pim kinases with their consensus substrate Pimtide (~10(7) to 10(8) M(-1) · s(-1)), the result of electrostatic enhancement, and propose a cellular role for this phenomenon.

Through the eye of the needle: recent advances in understanding biopolymer translocation

In recent years polymer translocation, i.e., transport of polymeric molecules through nanometer-sized pores and channels embedded in membranes, has witnessed strong advances. It is now possible to observe single-molecule polymer dynamics during the motion through channels with unprecedented spatial and temporal resolution. These striking experimental studies have stimulated many theoretical developments. In this short theory-experiment review, we discuss recent progress in this field with a strong focus on non-equilibrium aspects of polymer dynamics during the translocation process.

Disentangling steric and electrostatic factors in nanoscale transport through confined space

The voltage-driven passage of biological polymers through nanoscale pores is an analytically, technologically, and biologically relevant process. Despite various studies on homopolymer translocation there are still several open questions on the fundamental aspects of pore transport. One of the most important unresolved issues revolves around the passage of biopolymers which vary in charge and volume along their sequence. Here we exploit an experimentally tunable system to disentangle and quantify electrostatic and steric factors. This new, fundamental framework facilitates the understanding of how complex biopolymers are transported through confined space and indicates how their translocation can be slowed down to enable future sensing methods.

On the Lubensky-Nelson model of polymer translocation through nanopores

We revisit the one-dimensional stochastic model of an earlier study by D. K. Lubensky and D. R. Nelson for the electrically driven translocation of polynucleotides through α-hemolysin pores. We show that the model correctly describes two further important properties of the experimentally observed translocation time distributions, namely their spread (width) and their exponential decay. The resulting overall agreement between theoretical and experimental translocation time distributions is thus very good.

Translocation of a heterogeneous polymer

We present results on the sequence dependence of translocation kinetics for a partially charged heteropolymer moving through a very thin pore using theoretical tools and Langevin dynamics simulational techniques. The chain is composed of two types of monomers of differing frictional interaction with the pore and charge. We present exact analytical expressions for passage probability, mean first passage time, and mean successful passage times for both reflecting/absorbing and absorbing/absorbing boundary conditions, showing rich and unexpected dependence of translocation behavior on charge fraction, distribution along the chain, and electric field configuration. We find excellent qualitative and good quantitative agreement between theoretical and simulation results. Surprisingly, there emerges a threshold charge fraction of a diblock copolymer beyond which the success rate of translocation is independent of charge fraction. Also, the mean successful translocation time of a diblock copolymer displays non-monotonic behavior with increasing length of the charged block; there is an optimum length of the charged block where the mean translocation rate is the slowest; and there can be a substantial range of higher charge fractions which make the translocation slower than even a minimally charged chain. Additionally, we find for a fixed total charge on the chain, finer distribution along the backbone significantly decreases mean translocation time.

DNA strands attached inside single conical nanopores: ionic pore characteristics and insight into DNA biophysics

Single nanopores attract a great deal of scientific interest as a basis for biosensors and as a system to study the interactions and behavior of molecules in a confined volume. Tuning the geometry and surface chemistry of nanopores helps create devices that control transport of ions and molecules in solution. Here, we present single conically shaped nanopores whose narrow opening of 8 or 12 nm is modified with single-stranded DNA molecules. We find that the DNA occludes the narrow opening of nanopores and that the blockade extent decreases with the ionic strength of the background electrolyte. The results are explained by the ionic strength dependence of the persistence length of DNA. At low KCl concentrations (10 mM) the molecules assume an extended and rigid conformation, thereby blocking the pore lumen and reducing the flow of ionic current to a greater extent than compacted DNA at high salt concentrations. Attaching flexible polymers to the pore walls hence creates a system with tunable opening diameters in order to regulate transport of both neutral and charged species.

DNA strands from denatured duplexes are translocated through engineered protein nanopores at alkaline pH

Nanopores are under development for the detection of a variety of analytes and the investigation of chemical reactions at the single molecule level. In particular, the analysis of nucleic acid molecules is under intense investigation, including the development of systems for rapid, low-cost DNA sequencing. Here, we show that DNA can be translocated through an engineered alphaHL protein pore at pH 11.7, a value at which dsDNA is denatured. Therefore, the alphaHL pore is sufficiently stable to entertain the possibility of direct nanopore sequencing of genomic dsDNA samples, which are more readily obtained and handled than ssDNA.

Single-nucleotide discrimination in immobilized DNA oligonucleotides with a biological nanopore

The sequencing of individual DNA strands with nanopores is under investigation as a rapid, low-cost platform in which bases are identified in order as the DNA strand is transported through a pore under an electrical potential. Although the preparation of solid-state nanopores is improving, biological nanopores, such as alpha-hemolysin (alphaHL), are advantageous because they can be precisely manipulated by genetic modification. Here, we show that the transmembrane beta-barrel of an engineered alphaHL pore contains 3 recognition sites that can be used to identify all 4 DNA bases in an immobilized single-stranded DNA molecule, whether they are located in an otherwise homopolymeric DNA strand or in a heteropolymeric strand. The additional steps required to enable nanopore DNA sequencing are outlined.

Single-molecule DNA detection with an engineered MspA protein nanopore

Nanopores hold great promise as single-molecule analytical devices and biophysical model systems because the ionic current blockades they produce contain information about the identity, concentration, structure, and dynamics of target molecules. The porin MspA of Mycobacterium smegmatis has remarkable stability against environmental stresses and can be rationally modified based on its crystal structure. Further, MspA has a short and narrow channel constriction that is promising for DNA sequencing because it may enable improved characterization of short segments of a ssDNA molecule that is threaded through the pore. By eliminating the negative charge in the channel constriction, we designed and constructed an MspA mutant capable of electronically detecting and characterizing single molecules of ssDNA as they are electrophoretically driven through the pore. A second mutant with additional exchanges of negatively-charged residues for positively-charged residues in the vestibule region exhibited a factor of approximately 20 higher interaction rates, required only half as much voltage to observe interaction, and allowed ssDNA to reside in the vestibule approximately 100 times longer than the first mutant. Our results introduce MspA as a nanopore for nucleic acid analysis and highlight its potential as an engineerable platform for single-molecule detection and characterization applications.

Enhanced translocation of single DNA molecules through alpha-hemolysin nanopores by manipulation of internal charge

Both protein and solid-state nanopores are under intense investigation for the analysis of nucleic acids. A crucial advantage of protein nanopores is that site-directed mutagenesis permits precise tuning of their properties. Here, by augmenting the internal positive charge within the alpha-hemolysin pore and varying its distribution, we increase the frequency of translocation of a 92-nt single-stranded DNA through the pore at +120 mV by approximately 10-fold over the wild-type protein and dramatically lower the voltage threshold at which translocation occurs, e.g., by 50 mV for 1 event.s(-1).muM(-1). Further, events in which DNA enters the pore, but is not immediately translocated, are almost eliminated. These experiments provide a basis for improved nucleic acid analysis with protein nanopores, which might be translated to solid-state nanopores by using chemical surface modification.

Sequence effects on the forced translocation of heteropolymers through a small channel

By using a recently developed Monte Carlo algorithm and an exact numerical method, we calculate the translocation probability and the average translocation time for charged heterogeneous polymers driven through a nanopore by an external electric field. The heteropolymer chains are composed of two types of monomers (A and B) which differ only in terms of their electric charge. We present an exhaustive study of chains composed of eight monomers by calculating the average translocation time associated with the 256 possible arrangements for various ratios of the monomer charges (lambda(A)lambda(B)) and electric field intensities E. We find that each sequence leads to a unique value of the translocation probability and time. We also show that the distribution of translocation times is strongly dependent on the two forces felt by the monomers ( approximately lambda(A)E and approximately lambda(B)E). Finally, we present results that highlight the effect of having repetitive patterns by studying the translocation times of various block copolymer structures for a very long chain composed of N=2(18) monomers (all with the same number of A and B monomers).

Stochastic detection of motor protein-RNA complexes by single-channel current recording

A label- and immobilization-free approach to detecting the reversible formation of complexes between nucleic acids and proteins at the single-molecule level is described. The voltage-driven translocation of individual oligoribonucleotides through a nanoscale protein pore is observed by single-channel current recordings. The oligoribonucleotide 5'-C25A(25)-3' gives rise to current blockades with an average duration of approximately 0.5 ms. In the presence of the RNA-binding ATPase P4, a viral packaging motor from bacteriophage phi8, longer events of tens to hundreds of milliseconds are observed. Upon addition of ATP the long events disappear, indicating the dissociation of the P4RNA complex. The frequency of events also depends on the concentration of P4 and the length of the oligoribonucleotide, thereby confirming the specificity of the P4RNA events. This study shows that single-channel current recordings can be used to monitor RNA-protein complex formation, thus opening up a new means to examine the motor activity of RNA- or DNA-processing enzymes.

Exploring transmembrane transport through alpha-hemolysin with grid-steered molecular dynamics

The transport of biomolecules across cell boundaries is central to cellular function. While structures of many membrane channels are known, the permeation mechanism is known only for a select few. Molecular dynamics (MD) is a computational method that can provide an accurate description of permeation events at the atomic level, which is required for understanding the transport mechanism. However, due to the relatively short time scales accessible to this method, it is of limited utility. Here, we present a method for all-atom simulation of electric field-driven transport of large solutes through membrane channels, which in tens of nanoseconds can provide a realistic account of a permeation event that would require a millisecond simulation using conventional MD. In this method, the average distribution of the electrostatic potential in a membrane channel under a transmembrane bias of interest is determined first from an all-atom MD simulation. This electrostatic potential, defined on a grid, is subsequently applied to a charged solute to steer its permeation through the membrane channel. We apply this method to investigate permeation of DNA strands, DNA hairpins, and alpha-helical peptides through alpha-hemolysin. To test the accuracy of the method, we computed the relative permeation rates of DNA strands having different sequences and global orientations. The results of the G-SMD simulations were found to be in good agreement in experiment.

Ionic current blockades from DNA and RNA molecules in the alpha-hemolysin nanopore

We characterize the substate structure of current blockades produced when single-stranded polynucleotide molecules were electrophoretically driven into the alpha-hemolysin protein pore. We frequently observe substates where the ionic current is reduced by approximately 50%. Most of these substates can be associated with a molecular configuration where a polymer occupies only the vestibule region of the pore, though a few appear related to a polymer occupying only the transmembrane beta-barrel region of the pore. The duration of the vestibule configuration depends on polymer composition and on which end of the polymer, 3' or 5', subsequently threads into the narrowest constriction and initiates translocation. Below approximately 140 mV a polymer is more likely to escape from the vestibule against the applied voltage gradient, while at higher voltages a polymer is more likely to follow the voltage gradient by threading through the narrowest constriction and translocating through the pore. Increasing the applied voltage also increases the duration of the vestibule configuration. A semiquantitative model of these trends suggests that escape has stronger voltage dependence than threading, and that threading is sensitive to polymer orientation while escape is not. These results emphasize the utility of alpha-hemolysin as a model system to study biologically relevant physical and chemical processes at the single-molecule level.

Nanopore-based single-molecule DNA analysis

Nanopore-based DNA analysis is a single-molecule technique with revolutionary potential. It promises to carry out a range of analyses, orders of magnitude faster than current methods, including length measurement, specific sequence detection, single-molecule dynamics and even de novo sequencing. The concept involves using an applied voltage to drive DNA molecules through a narrow pore that separates chambers of electrolyte solution. This voltage also drives a flow of electrolyte ions through the pore, measured as an electric current. When molecules pass through the pore, they block the flow of ions and, thus, their structure and length can be determined based on the degree and duration of the resulting current reductions. In this review, I explain the nanopore-based DNA analysis concept and briefly explore its historical foundations, before discussing and summarizing all experimental results reported to date. I conclude with a summary of the obstacles that must be overcome for it to realize its promised potential.

Effect of orientation in translocation of polymers through nanopores

The motion of polymers with inhomogeneous structure through nanopores is discussed theoretically. Specifically, we consider the translocation dynamics of polymers consisting of double-stranded and single-stranded blocks. Since only the single-stranded chain can go through the nanopore the double-stranded segment has to unzip before the translocation. Utilizing a simple analytical model, translocation times are calculated explicitly for different polymer orientations, i.e., when the single-stranded block enters the pore first and when the double-stranded segment is a leading one. The dependence of the translocation dynamics on external fields, energy of interaction in the double-stranded segment, size of the polymer, and the fraction of double-stranded monomers is analyzed. It is found that the order of entrance into the pore has a significant effect on the translocation dynamics. The theoretical results are discussed using free-energy landscape arguments.

Langevin dynamics simulations of ds-DNA translocation through synthetic nanopores

We have implemented a coarse-grained model to study voltage-driven as-DNA translocation through nanopores located in synthetic membranes. The simulated trajectory of the DNA through the nanopores was calculated using Langevin dynamics. We present the results based on more than 120,000 individual translocations. We are particularly interested in this work in probing the physical basis of various experimentally observed--yet poorly understood--phenomena. Notably, we observe in our simulations the formation of ds-DNA hairpins, widely suspected to be the basis for quantized blockage. We study the translocation time, a measurable quantity crucially important in polyelectrolyte characterization, as a function of hairpin vertex location along the polymer backbone, finding that this behavior can be tuned to some degree by simulation parameters. We also study the voltage dependence of the tendency of hairpins to serve as the initiators of translocation events. Surprisingly, we find that the resulting probability depends vitally upon whether the events counted are ultimately successful or not. Further details lead us to propose that failed attempts in experimental translocation studies may be more common--and deceptive--than is generally recognized. We find the time taken by successful single file translocations to be directly proportional to the ratio of chain length to the applied voltage. Finally, we address a common yet puzzling phenomenon in translocation experiments: translocation events in which the current through the pore is highly, yet incompletely, blocked. We present the findings that offer a new explanation for such events.

Heteropolymer translocation through nanopores

The authors investigate the translocation dynamics of heteropolymers driven through a nanopore using a constant temperature Langevin thermostat. Specifically, they consider heteropolymers consisting of two types of monomers labeled A and B, which are distinguished by the magnitude of the driving force that they experience inside the pore. From a series of studies on polymers with sequences AmBn the authors identify both universal as well as specific sequence properties of the translocating chains. They find that the scaling of the average translocation time as a function of the chain length N remains unaffected by the heterogeneity, while the residence time of each bead is a strong function of the sequence for short repeat units. They further discover that for a symmetric heteropolymer AnBn of fixed length, the pattern exhibited by the residence times of the individual monomers has striking similarity with a double slit interference pattern where the total number of repeat units N/2n controls the number of interference fringes. These results are relevant for designing nanopore based sequencing techniques.

Nanopore sequencing technology: nanopore preparations

For the past decade, nanometer-scale pores have been developed as a powerful technique for sensing biological macromolecules. Various potential applications using these nanopores have been reported at the proof-of-principle stage, with the eventual aim of using them as an alternative to de novo DNA sequencing. Currently, there have been two general approaches to prepare nanopores for nucleic acid analysis: organic nanopores, such as alpha-hemolysin pores, are commonly used for DNA analysis, whereas synthetic solid-state nanopores have also been developed using various conventional and non-conventional fabrication techniques. In particular, synthetic nanopores with pore sizes smaller than the alpha-hemolysin pores have been prepared, primarily by electron-beam-assisted techniques: these are more robust and have better dimensional adjustability. This review will examine current methods of nanopore preparation, ranging from organic pore preparations to recent developments in synthetic nanopore fabrications.

Threading synthetic polyelectrolytes through protein pores

We have measured the ionic current signatures of sodium poly(styrene sulfonate) as its single molecules translocate through an alpha-hemolysin pore embedded into a bilayer in a salty aqueous medium under an externally applied electric field. As in the previous experiments involving DNA and RNA, the pore current, which is a measure of the ionic conductivity of the low molar mass electrolyte ions, is significantly reduced when the polymer molecule translocates through the pore. The magnitude and the duration of the reduction in the pore current are measured for each of the translocation events. By studying thousands of events of reduction in the ionic current, we have constructed distribution functions for the extent of the reduced current and for the translocation time. The details of these distribution functions are significantly different from those for DNA and RNA. By investigating over two orders of magnitude in the molecular weight of the polymer, the average translocation time is found to be proportional to the molecular weight and inversely proportional to the applied voltage. This demonstration of threading a synthetic polyelectrolyte through a protein pore opens up many opportunities to systematically explore the fundamental physical principles behind translocation of single macromolecules, by resorting to the wide variety of synthetically available polymers without the complexities arising from the sequences of biological polymers. In addition, the present experiments suggest yet another experimental protocol for separation of polymer molecules directly in aqueous media.

Nanopore sequencing technology: research trends and applications

Nanopore sequencing is one of the most promising technologies being developed as a cheap and fast alternative to the conventional Sanger sequencing method. Protein or synthetic nanopores have been used to detect DNA or RNA molecules. Although none of the technologies to date has shown single-base resolution for de novo DNA sequencing, there have been several reports of alpha-hemolysin protein nanopores being used for basic DNA analyses, and various synthetic nanopores have been fabricated. This review will examine current nanopore sequencing technologies, including recent developments of new applications.

Sequence-dependent gating of an ion channel by DNA hairpin molecules

DNA hairpins produce ionic current signatures when captured by the alpha-hemolysin nano-scale pore under conditions of single molecule electrophoresis. Gating patterns produced by individual DNA hairpins when captured can be used to distinguish differences of a single base pair or even a single nucleotide [Vercoutere,W.A. et al. (2003) Nucleic Acids Res., 31, 1311–1318]. Here we investigate the mechanism(s) that may account for the ionic current gating signatures. The ionic current resistance profile of conductance states produced by DNA hairpin molecules with 3–12 bp stems showed a plateau in resistance between 10 and 12 bp, suggesting that hairpins with 10–12 bp stems span the pore vestibule. DNA hairpins with 9–12 bp stems produced gating signatures with the same relative conductance states. Systematic comparison of the conductance state dwell times and apparent activation energies for a series of 9–10 bp DNA hairpins suggest that the 3′ and 5′ ends interact at or near the limiting aperture within the vestibule of the alpha-hemolysin pore. The model presented may be useful in predicting and interpreting DNA detection using nanopore detectors. In addition, this well-defined molecular system may prove useful for investigating models of ligand-gated channels in biological membranes.

Simulation of polymer translocation through protein channels

A modeling algorithm is presented to compute simultaneously polymer conformations and ionic current, as single polymer molecules undergo translocation through protein channels. The method is based on a combination of Langevin dynamics for coarse-grained models of polymers and the Poisson-Nernst-Planck formalism for ionic current. For the illustrative example of ssDNA passing through the alpha-hemolysin pore, vivid details of conformational fluctuations of the polymer inside the vestibule and beta-barrel compartments of the protein pore, and their consequent effects on the translocation time and extent of blocked ionic current are presented. In addition to yielding insights into several experimentally reported puzzles, our simulations offer experimental strategies to sequence polymers more efficiently.

Determination of RNA orientation during translocation through a biological nanopore

We investigate single-molecule electrophoretic translocation of A(50), C(50), A(25)C(50), and C(50)A(25) RNA molecules through the alpha-hemolysin transmembrane protein pore. We observe pronounced bilevel current blockages during translocation of A(25)C(50) and C(50)A(25) molecules. The two current levels observed during these bilevel blockages are very similar to the characteristic current levels observed during A(50) and C(50) translocation. From the temporal ordering of the two levels within the bilevel current blockages, we infer whether individual A(25)C(50) and C(50)A(25) molecules pass through the pore in a 3'-->5' or 5'-->3' orientation. Correlation between the level of current obstruction and the inferred A(25)C(50) or C(50)A(25) orientation indicates that 3'-->5' translocation of a poly C segment causes a significantly deeper current obstruction than 5'-->3' translocation. Our analysis also suggests that the 3' ends of C(50) and A(25)C(50) RNA molecules are more likely to initiate translocation than the 5' ends. Orientation dependent differences in a smaller current blockage that immediately precedes many translocation events suggest that this blockage also contains information about RNA orientation during translocation. These findings emphasize that the directionality of polynucleotide molecules is an important factor in translocation and demonstrate how structure within ionic current signals can give new insights into the translocation process.

Orientation discrimination of single-stranded DNA inside the alpha-hemolysin membrane channel

We characterize the voltage-driven motion and the free motion of single-stranded DNA (ssDNA) molecules captured inside the approximately 1.5-nm alpha-hemolysin pore, and show that the DNA-channel interactions depend strongly on the orientation of the ssDNA molecules with respect to the pore. Remarkably, the voltage-free diffusion of the 3'-threaded DNA (in the trans to cis direction) is two times slower than the corresponding 5'-threaded DNA having the same poly(dA) sequence. Moreover, the ion currents flowing through the blocked pore with either a 3'-threaded DNA or 5' DNA differ by approximately 30%. All-atom molecular dynamics simulations of our system reveal a microscopic mechanism for the asymmetric behavior. In a confining pore, the ssDNA straightens and its bases tilt toward the 5' end, assuming an asymmetric conformation. As a result, the bases of a 5'-threaded DNA experience larger effective friction and forced reorientation that favors co-passing of ions. Our results imply that the translocation process through a narrow pore is more complicated than previously believed and involves base tilting and stretching of ssDNA molecules inside the confining pore.

Advances in sequencing technology

Faster sequencing methods will undoubtedly lead to faster single nucleotide polymorphism (SNP) discovery. The Sanger method has served as the cornerstone for genome sequence production since 1977, close to almost 30 years of tremendous utility [Sanger, F., Nicklen, S., Coulson, A.R, DNA sequencing with chain-terminating inhibitors, Proc. Natl. Acad. Sci. U.S.A. 74 (1977) 5463-5467]. With the completion of the human genome sequence [Venter, J.C. et al., The sequence of the human genome, Science 291 (2001) 1304-1351; Lander, E.S. et al., Initial sequencing and analysis of the human genome, Nature 409 (2001) 860-921], there is now a focus on developing new sequencing methodologies that will enable "personal genomics", or the routine study of our individual genomes. Technologies that will lead us to this lofty goal are those that can provide improvements in three areas: read length, throughput, and cost. As progress is made in this field, large sections of genomes and then whole genomes of individuals will become increasingly more facile to sequence. SNP discovery efforts will be enhanced lock-step with these improvements. Here, the breadth of new sequencing approaches will be summarized including their status and prospects for enabling personal genomics.