Membrane protein folding makes the transition

Morphological Influence on a Nonionic Bilayer Bending Rigidity and Compression Modulus

The mechanical properties of multilamellar vesicles and their relevance to soft matter physics and material science are of significant interest. The bending rigidity, κ, and compression modulus, B, of three-dimensional (3D) finite nonspontaneous multilamellar vesicles, formed by a nonionic surfactant, are linked to nanoscale bilayer thickness, δ, estimated via small-angle X-ray scattering, and macroscopic elastic modulus measured through small-amplitude oscillatory shear experiments. κ and B significantly differ from the same system in the two-dimensional (2D) infinite nanostructured planar lamellar phase. Particularly, κ3D was found to be much smaller than κ2D, while an opposite behavior was seen for B. The 2D-to-3D morphology transition occurs under a transient mechanical field, resulting in rheopectic behavior. κ scales quadratically with δ, consistent with bilayer membrane theories, and linearly with vesicle radius in the densely packed state. These findings have implications for understanding and designing soft interfaces due to the influence of bending rigidity on transport properties.

Plasmodium falciparum CLAG Paralogs All Traffic to the Host Membrane but Knockouts Have Distinct Phenotypes

Malaria parasites increase their host erythrocyte's permeability to obtain essential nutrients from plasma and facilitate intracellular growth. In the human Plasmodium falciparum pathogen, this increase is mediated by the plasmodial surface anion channel (PSAC) and has been linked to CLAG3, a protein integral to the host erythrocyte membrane and encoded by a member of the conserved clag multigene family. Whether paralogs encoded by other clag genes also insert at the host membrane is unknown; their contributions to PSAC formation and other roles served are also unexplored. Here, we generated transfectant lines carrying epitope-tagged versions of each CLAG. Each paralog is colocalized with CLAG3, with concordant trafficking via merozoite rhoptries to the host erythrocyte membrane of newly invaded erythrocytes. Each also exists within infected cells in at least two forms: an alkaline-extractable soluble form and a form integral to the host membrane. Like CLAG3, CLAG2 has a variant region cleaved by extracellular proteases, but CLAG8 and CLAG9 are protease resistant. Paralog knockout lines, generated through CRISPR/Cas9 transfection, exhibited uncompromised growth in PGIM, a modified medium with higher physiological nutrient levels; this finding is in marked contrast to a recently reported CLAG3 knockout parasite. CLAG2 and CLAG8 knockout lines exhibited compensatory increases in the transcription of the remaining clags and associated rhoph genes, yielding increased PSAC-mediated uptake for specific solutes. We also report on the distinct transport properties of these knockout lines. Similar membrane topologies at the host membrane are consistent with each CLAG paralog contributing to PSAC, but other roles require further examination.

Membrane protein synthesis: no cells required

Despite advances in membrane protein (MP) structural biology and a growing interest in their applications, these proteins remain challenging to study. Progress has been hindered by the complex nature of MPs and innovative methods will be required to circumvent technical hurdles. Cell-free protein synthesis (CFPS) is a burgeoning technique for synthesizing MPs directly into a membrane environment using reconstituted components of the cellular transcription and translation machinery in vitro. We provide an overview of CFPS and how this technique can be applied to the synthesis and study of MPs. We highlight numerous strategies including synthesis methods and folding environments, each with advantages and limitations, to provide a survey of how CFPS techniques can advance the study of MPs.

Interpreting the molecular mechanisms of disease variants in human transmembrane proteins

Next-generation sequencing of human genomes reveals millions of missense variants, some of which may lead to loss of protein function and ultimately disease. Here, we investigate missense variants in membrane proteins-key drivers in cell signaling and recognition. We find enrichment of pathogenic variants in the transmembrane region across 19,000 functionally classified variants in human membrane proteins. To accurately predict variant consequences, one fundamentally needs to understand the underlying molecular processes. A key mechanism underlying pathogenicity in missense variants of soluble proteins has been shown to be loss of stability. Membrane proteins, however, are widely understudied. Here, we interpret variant effects on a larger scale by performing structure-based estimations of changes in thermodynamic stability using a membrane-specific energy function and analyses of sequence conservation during evolution of 15 transmembrane proteins. We find evidence for loss of stability being the cause of pathogenicity in more than half of the pathogenic variants, indicating that this is a driving factor also in membrane-protein-associated diseases. Our findings show how computational tools aid in gaining mechanistic insights into variant consequences for membrane proteins. To enable broader analyses of disease-related and population variants, we include variant mappings for the entire human proteome.

Detergents and alternatives in cryo-EM studies of membrane proteins

Structure determination of membrane proteins has been a long-standing challenge to understand the molecular basis of life processes. Detergents are widely used to study the structure and function of membrane proteins by various experimental methods, and the application of membrane mimetics is also a prevalent trend in the field of cryo-EM analysis. This review focuses on the widely-used detergents and corresponding properties and structures, and also discusses the growing interests in membrane mimetic systems used in cryo-EM studies, providing insights into the role of detergent alternatives in structure determination.

Manufacture of Multilayered Artificial Cell Membranes through Sequential Bilayer Deposition on Emulsion Templates

Efforts to manufacture artificial cells that replicate the architectures, processes and behaviours of biological cells are rapidly increasing. Perhaps the most commonly reconstructed cellular structure is the membrane, through the use of unilamellar vesicles as models. However, many cellular membranes, including bacterial double membranes, nuclear envelopes, and organelle membranes, are multilamellar. Due to a lack of technologies available for their controlled construction, multilayered membranes are not part of the repertoire of cell-mimetic motifs used in bottom-up synthetic biology. To address this, we developed emulsion-based technologies that allow cell-sized multilayered vesicles to be produced layer-by-layer, with compositional control over each layer, thus enabling studies that would otherwise remain inaccessible. We discovered that bending rigidities scale with the number of layers and demonstrate inter-bilayer registration between coexisting liquid-liquid domains. These technologies will contribute to the exploitation of multilayered membrane structures, paving the way for incorporating protein complexes that span multiple bilayers.

An Approach to Heterologous Expression of Membrane Proteins. The Case of Bacteriorhodopsin

Heterologous overexpression of functional membrane proteins is a major bottleneck of structural biology. Bacteriorhodopsin from Halobium salinarum (bR) is a striking example of the difficulties in membrane protein overexpression. We suggest a general approach with a finite number of steps which allows one to localize the underlying problem of poor expression of a membrane protein using bR as an example. Our approach is based on constructing chimeric proteins comprising parts of a protein of interest and complementary parts of a homologous protein demonstrating advantageous expression. This complementary protein approach allowed us to increase bR expression by two orders of magnitude through the introduction of two silent mutations into bR coding DNA. For the first time the high quality crystals of bR expressed in E. Coli were obtained using the produced protein. The crystals obtained with in meso nanovolume crystallization diffracted to 1.67 Å.

Measurements of the effect of membrane asymmetry on the mechanical properties of lipid bilayers

We detail an approach for constructing asymmetric membranes and characterising their mechanical properties, leading to the first measurement of the effect of asymmetry on lipid bilayer mechanics. Our results demonstrate that asymmetry induces a significant increase in rigidity compared to symmetric membranes. Given that all biological membranes are asymmetric our findings have profound implications for the role of this phenomenon in biology.

Mechanistic studies of the biogenesis and folding of outer membrane proteins in vitro and in vivo: what have we learned to date?

Research into the mechanisms by which proteins fold into their native structures has been on-going since the work of Anfinsen in the 1960s. Since that time, the folding mechanisms of small, water-soluble proteins have been well characterised. By contrast, progress in understanding the biogenesis and folding mechanisms of integral membrane proteins has lagged significantly because of the need to create a membrane mimetic environment for folding studies in vitro and the difficulties in finding suitable conditions in which reversible folding can be achieved. Improved knowledge of the factors that promote membrane protein folding and disfavour aggregation now allows studies of folding into lipid bilayers in vitro to be performed. Consequently, mechanistic details and structural information about membrane protein folding are now emerging at an ever increasing pace. Using the panoply of methods developed for studies of the folding of water-soluble proteins. This review summarises current knowledge of the mechanisms of outer membrane protein biogenesis and folding into lipid bilayers in vivo and in vitro and discusses the experimental techniques utilised to gain this information. The emerging knowledge is beginning to allow comparisons to be made between the folding of membrane proteins with current understanding of the mechanisms of folding of water-soluble proteins.

Measuring membrane protein stability under native conditions

The thermodynamic stability of proteins is typically measured at high denaturant concentrations and then extrapolated back to zero denaturant conditions to obtain unfolding free energies under native conditions. For membrane proteins, the extrapolations are fraught with considerable uncertainty as the denaturants may have complex effects on the membrane or micellar structure. We therefore sought to measure stability under native conditions, using a method that does not perturb the properties of the membrane or membrane mimetics. We use a technique called steric trapping to measure the thermodynamic stability of bacteriorhodopsin in bicelles and micelles. We find that bacteriorhodopsin has a high thermodynamic stability, with an unfolding free energy of ∼11 kcal/mol in dimyristoyl phosphatidylcholine bicelles. Nevertheless, the stability is much lower than predicted by extrapolation of measurements made at high denaturant concentrations. We investigated the discrepancy and found that unfolding free energy is not linear with denaturant concentration. Apparently, long extrapolations of helical membrane protein unfolding free energies must be treated with caution. Steric trapping, however, provides a method for making these measurements.

Structure and dynamic properties of membrane proteins using NMR

Integral membrane proteins are one of the most challenging groups of macromolecules despite their apparent conformational simplicity. They manage and drive transport, circulate information, and participate in cellular movements via interactions with other proteins and through intricate conformational changes. Their structural and functional decoding is challenging and has imposed demanding experimental development. Solution nuclear magnetic resonance (NMR) spectroscopy is one of the techniques providing the capacity to make a significant difference in the deciphering of the membrane protein structure-function paradigm. The method has evolved dramatically during the last decade resulting in a plethora of new experiments leading to a significant increase in the scientific repertoire for studying membrane proteins. Besides solving the three-dimensional structures using state-of-the-art approaches, a large variety of developments of well-established techniques are available providing insight into membrane protein flexibility, dynamics, and interactions. Inspired by the speed of development in the application of new strategies, by invention of methods to measure solvent accessibility and describe low-populated states, this review seeks to introduce the vast possibilities solution NMR can offer to the study of membrane protein structure-function analyses with special focus on applicability.

Rab1a and Rab5a preferentially bind to binary lipid compositions with higher stored curvature elastic energy

Rab proteins are a large family of GTP-binding proteins that regulate cellular membrane traffic and organelle identity. Rab proteins cycle between association with membranes and binding to RabGDI. Bound on membranes, each Rab has a very specific cellular location and it is this remarkable degree of specificity with which Rab GTPases recognize distinct subsets of intracellular membranes that forms the basis of their ability to act as key cellular regulators, determining the recruitment of downstream effectors to the correct membrane at the correct time. The molecular mechanisms controlling Rab localization remain poorly understood. Here, we present a fluorescence-based assay to investigate Rab GTPase membrane extraction and delivery by RabGDI. Using EGFP-Rab fusion proteins the amount of Rab:GDI complex obtained by GDI extraction of Rab proteins from HEK293 membranes could be determined, enabling control of complex concentration. Subsequent partitioning of the Rab GTPases into vesicles made up of artificial binary lipid mixtures showed for the first time, that the composition of the target membrane plays a key role in the localization of Rab proteins by sensing the stored curvature elastic energy in the membrane.

Pulsed hydrogen/deuterium exchange mass spectrometry for time-resolved membrane protein folding studies

Kinetic folding experiments by pulsed hydrogen/deuterium exchange (HDX) mass spectrometry (MS) are a well-established tool for water-soluble proteins. To the best of our knowledge, the current study is the first that applies this approach to an integral membrane protein. The native state of bacteriorhodopsin (BR) comprises seven transmembrane helices and a covalently bound retinal cofactor. BR exposure to sodium dodecyl sulfate (SDS) induces partial unfolding and retinal loss. We employ a custom-built three-stage mixing device for pulsed-HDX/MS investigations of BR refolding. The reaction is triggered by mixing SDS-denatured protein with bicelles. After a variable folding time (10 ms to 24 h), the protein is exposed to excess D(2) O buffer under rapid exchange conditions. The HDX pulse is terminated by acid quenching after 24 ms. Subsequent off-line analysis is performed by size exclusion chromatography and electrospray MS. These measurements yield the number of protected backbone N-H sites as a function of folding time, reflecting the recovery of secondary structure. Our results indicate that much of the BR secondary structure is formed quite late during the reaction, on a time scale of 10 s and beyond. It is hoped that in the future it will be possible to extend the pulsed-HDX/MS approach employed here to membrane proteins other than BR.

Engineering de novo membrane-mediated protein-protein communication networks

Mechanical properties of biological membranes are known to regulate membrane protein function. Despite this, current models of protein communication typically feature only direct protein-protein or protein-small molecule interactions. Here we show for the first time that, by harnessing nanoscale mechanical energy within biological membranes, it is possible to promote controlled communication between proteins. By coupling lipid-protein modules and matching their response to the mechanical properties of the membrane, we have shown that the action of phospholipase A(2) on acyl-based phospholipids triggers the opening of the mechanosensitive channel, MscL, by generating membrane asymmetry. Our findings confirm that the global physical properties of biological membranes can act as information pathways between proteins, a novel mechanism of membrane-mediated protein-protein communication that has important implications for (i) the underlying structure of signaling pathways, (ii) our understanding of in vivo communication networks, and (iii) the generation of building blocks for artificial protein networks.

A knowledge-based potential highlights unique features of membrane α-helical and β-barrel protein insertion and folding

Outer membrane β-barrel proteins differ from α-helical inner membrane proteins in lipid environment, secondary structure, and the proposed processes of folding and insertion. It is reasonable to expect that outer membrane proteins may contain primary sequence information specific for their folding and insertion behavior. In previous work, a depth-dependent insertion potential, E(z) , was derived for α-helical inner membrane proteins. We have generated an equivalent potential for TM β-barrel proteins. The similarities and differences between these two potentials provide insight into unique aspects of the folding and insertion of β-barrel membrane proteins. This potential can predict orientation within the membrane and identify functional residues involved in intermolecular interactions.

Protein folding mechanisms studied by pulsed oxidative labeling and mass spectrometry

Deciphering the mechanisms of protein folding remains a considerable challenge. In this review we discuss the application of pulsed oxidative labeling for tracking protein structural changes in a time-resolved fashion. Exposure to a microsecond OH pulse at selected time points during folding induces the oxidation of solvent-accessible side chains, whereas buried residues are protected. Oxidative modifications can be detected by mass spectrometry. Folding is associated with dramatic accessibility changes, and therefore this method can provide detailed mechanistic insights. Solvent accessibility patterns are complementary to H/D exchange investigations, which report on the extent of hydrogen bonding. This review highlights the application of pulsed OH labeling to soluble proteins as well as membrane proteins.

A folding pathway-dependent score to recognize membrane proteins

While various approaches exist to study protein localization, it is still a challenge to predict where proteins localize. Here, we consider a mechanistic viewpoint for membrane localization. Taking into account the steps for the folding pathway of α-helical membrane proteins and relating biophysical parameters to each of these steps, we create a score capable of predicting the propensity for membrane localization and call it FP(3)mem. This score is driven from the principal component analysis (PCA) of the biophysical parameters related to membrane localization. FP(3)mem allows us to rationalize the colocalization of a number of channel proteins with the Cav1.2 channel by their fewer propensities for membrane localization.

Site-directed mutagenesis combined with oxidative methionine labeling for probing structural transitions of a membrane protein by mass spectrometry

Exposure of the membrane protein bacteriorhodopsin (BR) to SDS induces partial breakdown of the native conformation. The exact structural properties of this SDS state remain a matter of debate, despite its widespread use in BR folding experiments. The current work employs hydroxyl radical (·OH) labeling in conjunction with mass spectrometry (MS)-based peptide mapping for probing the solvent accessibility of individual BR segments in the presence of SDS. Previous work revealed methionine sulfoxide formation to be the dominant oxidative pathway. Those data suggested extensive unfolding of helices A and D in SDS. Unfortunately, the lack of Met residues in helices C and F implies that no direct information on the behavior of the latter two elements could be obtained. Here, we address this problem by employing two variants with additional Met residues, L93M (helix C) and V179M (helix F). The oxidation behavior of the resulting 11 methionines can be grouped into three categories: (1) extensively labeled both in native BR and in SDS (loop residues M32, M68, and M163); (2) protected in the native state but not in SDS (M20, M118); (3) always protected (M56, M60, M93, M145, M179, M209). These data show that a solvent-inaccessible core is retained in SDS. This core consists of partially intact helices B, C, E, F, and G. The termini of these helices are highly dynamic and/or unraveled, particularly on the cytoplasmic side. Overall, this work demonstrates how the use of engineered ·OH labeling sites can provide insights into structural properties of membrane proteins.

What lessons can be learned from studying the folding of homologous proteins?

The studies of the folding of structurally related proteins have proved to be a very important tool for investigating protein folding. Here we review some of the insights that have been gained from such studies. Our highlighted studies show just how such an investigation should be designed and emphasise the importance of the synergy between experiment and theory. We also stress the importance of choosing the right system carefully, exploiting the excellent structural and sequence databases at our disposal.