From hydration repulsion to dry adhesion between asymmetric hydrophilic and hydrophobic surfaces

Protein adsorption on blood-contacting surfaces: A thermodynamic perspective to guide the design of antithrombogenic polymer coatings

Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. Thrombosis is fundamentally initiated by the nonspecific adsorption of proteins to the material surface, which is strongly governed by thermodynamic factors established by the nature of the interaction between the material surface, surrounding water molecules, and the protein itself. Along these lines, different surface materials (such as polymeric, metallic, ceramic, or composite) induce different entropic and enthalpic changes at the surface-protein interface, with material wettability significantly impacting this behavior. Consequently, protein adsorption on medical devices can be modulated by altering their wettability and surface energy. A plethora of polymeric coating modifications have been utilized for this purpose; hydrophobic modifications may promote or inhibit protein adsorption determined by van der Waals forces, while hydrophilic materials achieve this by mainly relying on hydrogen bonding, or unbalanced/balanced electrostatic interactions. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications. STATEMENT OF SIGNIFICANCE: Blood-contacting medical devices often succumb to thrombosis, limiting their durability and safety in clinical applications. A plethora of polymeric coating modifications have been utilized for addressing this issue. This review offers a cohesive understanding of the thermodynamics governing these phenomena, to specifically aid in the design and selection of hemocompatible polymeric coatings for biomedical applications.

Water Structuring Induces Nonuniversal Hydration Repulsion between Polar Surfaces: Quantitative Comparison between Molecular Simulations, Theory, and Experiments

Polar surfaces in water typically repel each other at close separations, even if they are charge-neutral. This so-called hydration repulsion balances the van der Waals attraction and gives rise to a stable nanometric water layer between the polar surfaces. The resulting hydration water layer is crucial for the properties of concentrated suspensions of lipid membranes and hydrophilic particles in biology and technology, but its origin is unclear. It has been suggested that surface-induced molecular water structuring is responsible for the hydration repulsion, but a quantitative proof of this water-structuring hypothesis is missing. To gain an understanding of the mechanism causing hydration repulsion, we perform molecular simulations of different planar polar surfaces in water. Our simulated hydration forces between phospholipid bilayers agree perfectly with experiments, validating the simulation model and methods. For the comparison with theory, it is important to split the simulated total surface interaction force into a direct contribution from surface-surface molecular interactions and an indirect water-mediated contribution. We find the indirect hydration force and the structural water-ordering profiles from the simulations to be in perfect agreement with the predictions from theoretical models that account for the surface-induced water ordering, which strongly supports the water-structuring hypothesis for the hydration force. However, the comparison between the simulations for polar surfaces with different headgroup architectures reveals significantly different decay lengths of the indirect water-mediated hydration-force, which for laterally homogeneous water structuring would imply different bulk-water properties. We conclude that laterally inhomogeneous water ordering, induced by laterally inhomogeneous surface structures, shapes the hydration repulsion between polar surfaces in a decisive manner. Thus, the indirect water-mediated part of the hydration repulsion is caused by surface-induced water structuring but is surface-specific and thus nonuniversal.

Study of Hydration Repulsion of Zwitterionic Polymer Brushes Resistant to Protein Adhesion through Molecular Simulations

The fabrication of antifouling zwitterionic polymer brushes represents a leading approach to mitigate nonspecific adhesion on the surfaces of medical devices. This investigation seeks to elucidate the correlation between the material composition and structural attributes of these polymer brushes in preventing protein adhesion. To achieve this goal, we modeled three different zwitterionic brushes, namely, carboxybetaine methacrylate (CBMA), sulfobetaine methacrylate (SBMA), and (2-(methacryloyloxy)ethyl)-phosphorylcholine (MPC). The simulations revealed that elevating the grafting density enhances the structural stability, hydration strength, and resistance to protein adhesion exhibited by the polymer brushes. PCBMA manifests a more robust hydration layer, while PMPC demonstrates the slightest interaction with proteins. In a comprehensive evaluation, PSBMA polymer brushes emerged as the best choice with superior stability, enhanced protein repulsion, and minimally induced protein deformation, resulting in effective resistance to nonspecific adhesion. The high-density SBMA polymer brushes significantly reduce the level of protein adhesion in AFM testing. In addition, we have pioneered the quantitative characterization of hydration repulsion in polymer brushes by analyzing the hydration repulsion characteristics at different materials and graft densities. In summary, our study provides a nuanced understanding of the material and structural determinants influencing the capacity of zwitterionic polymer brushes to thwart protein adhesion. Additionally, it presents a quantitative elucidation of hydration repulsion, contributing to the advancement and application of antifouling polymer brushes.

High-density zwitterionic polymer brushes exhibit robust lubrication properties and high antithrombotic efficacy in blood-contacting medical devices

High-performance catheters are essential for interventional surgeries, requiring reliable anti-adhesive and lubricated surfaces. This article develops a strategy for constructing high-density sulfobetaine zwitterionic polymer brushes on the surface of catheters, utilizing dopamine and sodium alginate as the primary intermediate layers, where dopamine provides mussel-protein-like adhesion to anchor the polymer brushes to the catheter surface. Hydroxyl-rich sodium alginate increases the number of grafting sites and improves the grafting mass by more than 4 times. The developed high-density zwitterionic polymer brushes achieve long-lasting and effective lubricity (μ<0.0078) and are implanted in rabbits for four hours without bio-adhesion and thrombosis in the absence of anticoagulants such as heparin. Experiments and molecular dynamics simulations demonstrate that graft mass plays a decisive role in the lubricity and anti-adhesion of polymer brushes, and it is proposed to predict the anti-adhesion of polymer brushes by their lubricity to avoid costly and time-consuming bioassays during the development of amphoteric polymer brushes. A quantitative influence of hydration in the anti-adhesion properties of amphiphilic polymer brushes is also revealed. Thus, this study provides a new approach to safe, long-lasting lubrication and anticoagulant surface modification for medical devices in contact with blood. STATEMENT OF SIGNIFICANCE: High friction and bioadhesion on medical device surfaces can pose a significant risk to patients. In response, we have developed a safer, simpler, and more application-specific surface modification strategy that addresses both the lubrication and anti-bioadhesion needs of medical device surfaces. We used dopamine and sodium alginate as intermediate layers to drastically increase the grafting density of the zwitterionic brushes and enabled the modified surfaces to have an extremely low coefficient of friction (μ = 0.0078) and to remain non-bioadhesive for 4 hours in vivo. Furthermore, we used molecular dynamics simulations to gain insight into the mechanisms behind the superior anti-adhesion properties of the high-density polymer brushes. Our work contributes to the development and application of surface-modified coatings.

Understanding the "Berg limit": the 65° contact angle as the universal adhesion threshold of biomatter

Surface phenomena in aqueous environments such as long-range hydrophobic attraction, macromolecular adhesion, and even biofouling are predominantly influenced by a fundamental parameter-the water contact angle. The minimal contact angle required for these and related phenomena to occur has been repeatedly reported to be around 65° and is commonly referred to as the "Berg limit." However, the universality of this specific threshold across diverse contexts has remained puzzling. In this perspective article, we aim to rationalize the reoccurrence of this enigmatic contact angle. We show that the relevant scenarios can be effectively conceptualized as three-phase problems involving the surface of interest, water, and a generic oil-like material that is representative of the nonpolar constituents within interacting entities. Our analysis reveals that attraction and adhesion emerge when substrates display an underwater oleophilic character, corresponding to a "hydrophobicity under oil", which occurs for contact angles above approximately 65°. This streamlined view provides valuable insights into macromolecular interactions and holds implications for technological applications.

Conditions for the stable adsorption of lipid monolayers to solid surfaces

Lipid monolayers are ubiquitous in biological systems and have multiple roles in biotechnological applications, such as lipid coatings that enhance colloidal stability or prevent surface fouling. Despite the great technological importance of surface-adsorbed lipid monolayers, the connection between their formation and the chemical characteristics of the underlying surfaces has remained poorly understood. Here, we elucidate the conditions required for stable lipid monolayers nonspecifically adsorbed on solid surfaces in aqueous solutions and water/alcohol mixtures. We use a framework that combines the general thermodynamic principles of monolayer adsorption with fully atomistic molecular dynamics simulations. We find that, very universally, the chief descriptor of adsorption free energy is the wetting contact angle of the solvent on the surface. It turns out that monolayers can form and remain thermodynamically stable only on substrates with contact angles above the adsorption contact angle, θads. Our analysis establishes that θads falls into a narrow range of around 60∘-70∘ in aqueous media and is only weakly dependent on the surface chemistry. Moreover, to a good approximation, θads is roughly determined by the ratio between the surface tensions of hydrocarbons and the solvent. Adding small amounts of alcohol to the aqueous medium lowers θads and thereby facilitates monolayer formation on hydrophilic solid surfaces. At the same time, alcohol addition weakens the adsorption strength on hydrophobic surfaces and results in a slowdown of the adsorption kinetics, which can be useful for the preparation of defect-free monolayers.

Modified Electrospun Membranes Using Different Nanomaterials for Membrane Distillation

Obtaining fresh drinking water is a challenge directly related to the change in agricultural, industrial, and societal demands and pressure. Therefore, the sustainable treatment of saline water to get clean water is a major requirement for human survival. In this review, we have detailed the use of electrospun nanofiber-based membranes (ENMs) for water reclamation improvements with respect to physical and chemical modifications. Although membrane distillation (MD) has been considered a low-cost water reclamation process, especially with the availability of low-grade waste heat sources, significant improvements are still required in terms of preparing efficient membranes with enhanced water flux, anti-fouling, and anti-scaling characteristics. In particular, different types of nanomaterials have been explored as guest molecules for electrospinning with different polymers. Nanomaterials such as metallic organic frameworks (MOFs), zeolites, dioxides, carbon nanotubes (CNTs), etc., have opened unprecedented perspectives for the implementation of the MD process. The integration of nanofillers gives appropriate characteristics to the MD membranes by changing their chemical and physical properties, which significantly enhances energy efficiency without impacting the economic costs. Here, we provide a comprehensive overview of the state-of-the-art status, the opportunities, open challenges, and pitfalls of the emerging field of modified ENMs using different nanomaterials for desalination applications.

Structural features of interfacial water predict the hydrophobicity of chemically heterogeneous surfaces

The hydrophobicity of an interface determines the magnitude of hydrophobic interactions that drive numerous biological and industrial processes. Chemically heterogeneous interfaces are abundant in these contexts; examples include the surfaces of proteins, functionalized nanomaterials, and polymeric materials. While the hydrophobicity of nonpolar solutes can be predicted and related to the structure of interfacial water molecules, predicting the hydrophobicity of chemically heterogeneous interfaces remains a challenge because of the complex, non-additive contributions to hydrophobicity that depend on the chemical identity and nanoscale spatial arrangements of polar and nonpolar groups. In this work, we utilize atomistic molecular dynamics simulations in conjunction with enhanced sampling and data-centric analysis techniques to quantitatively relate changes in interfacial water structure to the hydration free energy (a thermodynamically well-defined descriptor of hydrophobicity) of chemically heterogeneous interfaces. We analyze a large data set of 58 self-assembled monolayers (SAMs) composed of ligands with nonpolar and polar end groups of different chemical identity (amine, amide, and hydroxyl) in five mole fractions, two spatial patterns, and with scaled partial charges. We find that only five features of interfacial water structure are required to accurately predict hydration free energies. Examination of these features reveals mechanistic insights into the interfacial hydrogen bonding behaviors that distinguish different surface compositions and patterns. This analysis also identifies the probability of highly coordinated water structures as a unique signature of hydrophobicity. These insights provide a physical basis to understand the hydrophobicity of chemically heterogeneous interfaces and connect hydrophobicity to experimentally accessible perturbations of interfacial water structure.

Different Temperature- and Pressure-Effects on the Water-Mediated Interactions between Hydrophobic, Hydrophilic, and Hydrophobic-Hydrophilic Nanoscale Surfaces

Water-mediated interactions (WMI) are responsible for diverse processes in aqueous solutions, including protein folding and nanoparticle aggregation. WMI may be affected by changes in temperature and pressure and hence, they can alter chemical/physical processes that occur in aqueous environments. Traditionally, attention has been focused on hydrophobic interactions while, in comparison, the role of hydrophilic and hybrid (hydrophobic-hydrophilic) interactions have been mostly overlooked. Here we study the role of T and P of the WMI between nanoscale (i) hydrophobic-hydrophobic, (ii) hydrophilic-hydrophilic, and (iii) hydrophilic-hydrophobic pairs of (hydroxylated/non-hydroxylated) graphene-based surfaces. We find that hydrophobic, hydrophilic and hybrid interactions are all sensitive to P. However, while hydrophobic interactions [case (i)] are sensitive to T-variations, hydrophilic [case (ii)] and hybrid interactions [case (iii)] are practically T-independent. An analysis of the entropic and enthalpic contributions to the PMF for cases (i)-(iii) is also presented. Our results are important in understanding T- and P-induced protein denaturation, and the interactions of biomolecules in solution, including protein aggregation andphase separation processes. From the computational point of view, the results presented here are relevant in the design of implicit water models for the study of molecular and colloidal/nanoparticle systems at different thermodynamic conditions.

Stability of Water Confined between Supported Self-Assembled Monolayers

We present a thermodynamic argument showing that the evaporation and condensation free-energy barriers of water confined between two hydrophobic self-assembled monolayers (SAMs) vary more gradually with the SAM hydrophobicity as compared to the case of water confined between two bare hydrophobic surfaces (no SAMs). We validate our theory by calculating the free-energy profiles of water confined between two SAMs and between two bare surfaces of different hydrophobicities. An implication of our findings is the existence of three regimes of stability of confined water as a function of the hydrophobicity of the SAMs. In comparison to bare planar surfaces with no SAMs, the highly hydrophobic SAMs act to stabilize the liquid state, whereas weakly hydrophobic SAMs stabilize the vapor state of confined water. For intermediate hydrophobicities, the SAMs reduce both the evaporation and the condensation free-energy barriers. These results imply that the effects of SAM hydrophobicity on the behavior of confined water are nontrivial and richer than previously thought.

Mycobacterial Adhesion: From Hydrophobic to Receptor-Ligand Interactions

Adhesion is crucial for the infective lifestyles of bacterial pathogens. Adhesion to non-living surfaces, other microbial cells, and components of the biofilm extracellular matrix are crucial for biofilm formation and integrity, plus adherence to host factors constitutes a first step leading to an infection. Adhesion is, therefore, at the core of pathogens’ ability to contaminate, transmit, establish residency within a host, and cause an infection. Several mycobacterial species cause diseases in humans and animals with diverse clinical manifestations. Mycobacterium tuberculosis, which enters through the respiratory tract, first adheres to alveolar macrophages and epithelial cells leading up to transmigration across the alveolar epithelium and containment within granulomas. Later, when dissemination occurs, the bacilli need to adhere to extracellular matrix components to infect extrapulmonary sites. Mycobacteria causing zoonotic infections and emerging nontuberculous mycobacterial pathogens follow divergent routes of infection that probably require adapted adhesion mechanisms. New evidence also points to the occurrence of mycobacterial biofilms during infection, emphasizing a need to better understand the adhesive factors required for their formation. Herein, we review the literature on tuberculous and nontuberculous mycobacterial adhesion to living and non-living surfaces, to themselves, to host cells, and to components of the extracellular matrix.

Critical Packing Density of Water-Mediated Nonstick Self-Assembled Monolayer Coatings

Nanoparticle-mineral surface interactions are relevant in many biological and geological applications. We have previously studied nanoparticle coatings based on closely packed bicomponent polyol-fluoroalkane self-assembled monolayers (SAMs) that can have tunable stickiness on calcite surfaces by changing the compositions of fluoroalkanes in SAMs, where the coatings show nonstick properties if fluoroalkanes can effectively perturb hydration layers on calcite surfaces. However, when applying coatings on nanoparticles, it can be challenging to predict the maximum achievable coating density. Here, we study how would water-mediated SAM-calcite interactions change with different SAM coating densities. Molecular dynamics simulations show that compositionally repulsive, closely packed polyol-fluoroalkane SAMs become adhesive to calcite surfaces with decreasing coating densities. Our modeling shows that this results from the collapsing of fluoroalkanes into the voids of SAMs, where fluoroalkanes can no longer perturb hydration layers on calcite surfaces. Interestingly, we find that the nonstick-stick transition occurs when the volume fractions of the voids on SAMs are greater than the volume fractions of hydrophilic coating molecules.

Unexpected hydrophobicity on self-assembled monolayers terminated with two hydrophilic hydroxyl groups

Current major approaches to access surface hydrophobicity include directly introducing hydrophobic nonpolar groups/molecules onto the surface or elaborately fabricating surface roughness. Here, for the first time, molecular dynamics simulations show an unexpected hydrophobicity with a contact angle of 82° on a flexible self-assembled monolayer terminated only with two hydrophilic OH groups ((OH)₂-SAM). This hydrophobicity, verified by a water slip phenomenon characterizing the friction on the (OH)₂-SAM surface, is attributed to the formation of a hexagonal-ice-like H-bonding structure in the OH matrix of (OH)₂-SAM, which sharply reduces the hydrogen bonds between the surface and the water molecules above. The unique simple interface presented here offers a significant molecular-level platform for examining the bio-interfacial interactions ranging from biomolecule binding to cell adhesion.

Attractive forces slow contact formation between deformable bodies underwater

Thermodynamics tells us to expect underwater contact between two hydrophobic surfaces to result in stronger adhesion compared to two hydrophilic surfaces. However, the presence of water changes not only energetics but also the dynamic process of reaching a final state, which couples solid deformation and liquid evacuation. These dynamics can create challenges for achieving strong underwater adhesion/friction, which affects diverse fields including soft robotics, biolocomotion, and tire traction. Closer investigation, requiring sufficiently precise resolution of film evacuation while simultaneously controlling surface wettability, has been lacking. We perform high-resolution in situ frustrated total internal reflection imaging to track underwater contact evolution between soft-elastic hemispheres of varying stiffness and smooth-hard surfaces of varying wettability. Surprisingly, we find the exponential rate of water evacuation from hydrophobic-hydrophobic (adhesive) contact is three orders of magnitude lower than that from hydrophobic-hydrophilic (nonadhesive) contact. The trend of decreasing rate with decreasing wettability of glass sharply changes about a point where thermodynamic adhesion crosses zero, suggesting a transition in mode of evacuation, which is illuminated by three-dimensional spatiotemporal height maps. Adhesive contact is characterized by the early localization of sealed puddles, whereas nonadhesive contact remains smooth, with film-wise evacuation from one central puddle. Measurements with a human thumb and alternatively hydrophobic/hydrophilic glass surface demonstrate practical consequences of the same dynamics: adhesive interactions cause instability in valleys and lead to a state of more trapped water and less intimate solid-solid contact. These findings offer interpretation of patterned texture seen in underwater biolocomotive adaptations as well as insight toward technological implementation.

Unraveling the Role of Architecture in Polymer-Based Glues for Hydrogels

We investigate polymers of different architectures as potential candidates for the development of glues for hydrogels. Using a combination of coarse-grained modeling and molecular dynamics simulations, we systematically characterize the link between experimentally tunable parameters and adhesion energy. We find that, for a broad set of parameters, adhesion is controlled almost exclusively by the total amount of glue at the interface and by the glue-hydrogel affinity. Instead, it is largely independent of changes in polymer architecture and size, a conclusion that shines new light on previously observed experimental trends. Additionally, we show that the scaling behavior of the properties we measure can be explained by modeling the glue as an ensemble of ideal, noninteracting, and linear polymer segments. We expect that the fundamental insights herein provided will aid the design of new polymer-based adhesives for hydrogels.

Light-Activated Adhesion and Debonding of Underwater Pressure-Sensitive Adhesives

Pressure-sensitive adhesives (PSAs) such as sticky notes and labels are a ubiquitous part of modern society. PSAs with a wide range of peel adhesion strength are designed by tailoring the bulk and surface properties of the adhesive. However, designing an adhesive with strong initial adhesion but showing an on-demand decrease in adhesion has been an enduring challenge in the design of PSAs. To address this challenge, we designed alkoxyphenacyl-based polyurethane (APPU) PSAs that show a photoactivated increase and decrease in peel strength. With increasing time of light exposure, the failure mode of our PSAs shifted from cohesive to adhesive failure, providing residue-free removal with up to 83% decrease in peel strength. The APPU-PSAs also adhere to substrates submerged underwater and show a similar photoinduced decrease in adhesion strength.

Controlling water-mediated interactions by designing self-assembled monolayer coatings

Engineered nanoparticles have been broadly used in biological and geological systems. Hydrophilic molecules such as polyols have been used as coatings on nanoparticle surfaces due to their good biocompatibility and solubility in saline water. However, polyol coatings can cause huge retention of nanoparticles when encountering mineral surfaces. Here, molecular dynamics simulations enlightened that the strong adhesion of hydrophilic coatings to mineral surfaces stemming from the partitioning of the hydroxy groups on the hydrophilic molecules to the well-defined bound hydration layers on the mineral surfaces. To mitigate the nanoparticle adhesion, we investigated introducing small percentages of omniphobic fluoroalkanes to form a bicomponent system of hydrophilic and fluoroalkanes, which greatly perturbed the hydration layers on mineral surfaces and resulted in nonstick surface coatings. Our results provide important insight for the design of tunable “stickiness” nanoparticle coatings in different mineralogies, such as applications in subsurface environments or targeted delivery in mineralized tissues.

Particle Diffusivity and Free-Energy Profiles in Hydrogels from Time-Resolved Penetration Data

A combined experimental and theoretical method to simultaneously determine diffusivity and free-energy profiles of particles that penetrate into inhomogeneous hydrogel systems is presented. As the only input, arbitrarily normalized concentration profiles from fluorescence intensity data of labeled tracer particles for different penetration times are needed. The method is applied to dextran molecules of varying size that penetrate into hydrogels of polyethylene-glycol chains with different lengths that are covalently cross-linked by hyperbranched polyglycerol hubs. Extracted dextran bulk diffusivities agree well with fluorescence correlation spectroscopy data obtained separately. Empirical scaling laws for dextran diffusivities and free energies inside the hydrogel are identified as a function of the dextran mass. An elastic free-volume model that includes dextran as well as polyethylene-glycol linker flexibility quantitively describes the repulsive dextran-hydrogel interaction free energy, which is of steric origin, and furthermore suggests that the hydrogel mesh-size distribution is rather broad and particle penetration is dominated by large hydrogel pores. Particle penetration into hydrogels for steric particle-hydrogel interactions is thus suggested to be governed by an elastic size-filtering mechanism that involves the tail of the hydrogel pore-size distribution.

Closest-Packing Water Monolayer Stably Intercalated in Phyllosilicate Minerals under High Pressure

The directional hydrogen-bond (HB) network and nondirectional van der Waals (vdW) interactions make up the specificity of water. Directional HBs could construct an ice-like monolayer in hydrophobic confinement even in the ambient regime. Here, we report a water monolayer dominated by vdW interactions confined in a phyllosilicate interlayer under high pressure. Surprisingly, it was in a thermodynamically stable state coupled with bulk water at the same pressure (P) and temperature (T), as revealed by the thermodynamic integration approach on the basis of molecular dynamics (MD) simulations. Both classical and ab initio MD simulations showed water O atoms were stably trapped and exhibited an ordered hexagonal closest-packing arrangement, but OH bonds of water reoriented frequently and exhibited a specific two-stage reorientation relaxation. Strikingly, hydration in the interlayer under high pressure had no relevance with surface hydrophilicity rationalized by the HB forming ability, which, however, determines wetting in the ambient regime. Intercalated water molecules were trapped by vdW interactions, which shaped the closest-packing arrangement and made hydration energetically available. The high pressure-volume term largely drives hydration, as it compensates the entropy penalty which is restricted by a relatively lower temperature. This vdW water monolayer should be ubiquitous in the high pressure but low-temperature regime.

Comparative Study of Water-Mediated Interactions between Hydrophilic and Hydrophobic Nanoscale Surfaces

Self-assembly processes in aqueous solutions, such as protein folding and nanoparticle aggregation, are driven by water-mediated interactions (WMIs). The most common of such interactions are the attractive forces between hydrophobic units. While numerous studies have focused on hydrophobic interactions, WMIs between hydrophilic moieties and pairs of hydrophilic-hydrophobic surfaces have received much less attention. In this work, we perform molecular dynamics simulations to study the WMI between nanoscale (i) hydrophobic-hydrophobic, (ii) hydrophilic-hydrophilic, and (iii) hydrophilic-hydrophobic pairs of (hydroxylated/nonhydroxylated) graphene-based surfaces. We find that in all cases, the potential of mean force (PMF) between the plates exhibits oscillations as a function of the plate separations r, up to r ≈ 1-1.5 nm. The local minima of the PMF, which define the stable/metastable states of the system, correspond to plates' separations at which water molecules arrange into n = 0, 1, 2, ... layers between the plates. In case (i), the stable state of the system corresponds to the plates in contact with one another. Instead, in cases (ii) and (iii), water is never removed between the plates. The free-energy barriers separating the stable/metastable states of the system vary with the hydrophilicity/hydrophobicity of the interacting plates. However, the effective forces between the plates are comparable in magnitude. This strongly suggests that hydrophilic-hydrophilic and hydrophilic-hydrophobic interactions can play a relevant role in self-assembly processes in aqueous solutions, alike hydrophobic interactions. Interestingly, we find that the WMIs between hydrophilic-hydrophilic and hydrophilic-hydrophobic plates are similar, suggesting that only one hydrophilic surface is sufficient to induce hydrophilic-like WMI. We also briefly discuss the role of surface polarity on the WMI. In particular, we show that depending on the surface polarity, WMI can exhibit mixed features characteristic of hydrophobic and hydrophilic interactions. Our results suggest that the forces between hydrophobic, hydrophilic, and hydrophobic/hydrophilic surfaces are all relevant in driving a self-assembly system toward its final state, but it is the hydrophobic interaction that provides stability to such a final state.

Wetting Transition on Liquid-Repellent Surfaces Probed by Surface Force Measurements and Confocal Imaging

Superhydrophobic surfaces in the Cassie-Baxter wetting state retain an air layer at the surface which prevents liquid water from reaching into the porous surface structure. In this work we explore how addition of ethanol, which reduces the surface tension, influences the wetting properties of superhydrophobic and smooth hydrophobic surfaces. Wetting properties are measured by dynamic contact angles, and the air layer at the superhydrophobic surface is visualized by laser scanning confocal microscopy. Colloidal probe atomic force microscopy measurements between a hydrophobic microsphere and the macroscopic surfaces showed that the presence of ethanol strongly affects the interaction forces. When the macroscopic surface is superhydrophobic, attractive forces extending up to a few micrometers are observed on retraction in water and in 20 vol % ethanol, signifying the presence of a large and growing gas capillary. Submicrometer attractive forces are observed between the probe particle and a smooth hydrophobic surface, and in this case a smaller gas capillary is formed. Addition of ethanol results in markedly different effects between superhydrophobic and hydrophobic surfaces. In particular, we show that the receding contact angle on the superhydrophobic surface is of paramount importance for describing the interaction forces.

Direct Observation of Gas Meniscus Formation on a Superhydrophobic Surface

The formation of a bridging gas meniscus via cavitation or nanobubbles is considered the most likely origin of the submicrometer long-range attractive forces measured between hydrophobic surfaces in aqueous solution. However, the dynamics of the formation and evolution of the gas meniscus is still under debate, in particular, in the presence of a thin air layer on a superhydrophobic surface. On superhydrophobic surfaces the range can even exceed 10 μm. Here, we report microscopic images of the formation and growth of a gas meniscus during force measurements between a superhydrophobic surface and a hydrophobic microsphere immersed in water. This is achieved by combining laser scanning confocal microscopy and colloidal probe atomic force microscopy. The configuration allows determination of the volume and shape of the meniscus, together with direct calculation of the Young-Laplace capillary pressure. The long-range attractive interactions acting on separation are due to meniscus formation and volume growth as air is transported from the surface layer.

Measurement of entropic force from polymers attached to a pyramidal tip

The measurement of the boundary shape dependence of the entropic force from long polymers was attempted. The pyramidal cone-plate geometry was chosen. The polymer molecules were covalently bound to a well-defined Au patch at the apex of a pyramidal cantilever tip of the atomic force microscope (AFM). A smooth hydrophobic plate was used as the second boundary to confine the polymer molecules. The use of the hydrophobic plate allows neglect of polymer adhesion forces. The measurements were made in salt water solution to decrease the effect of electrostatic forces from any uncompensated charges on the boundary. As the functionalized AFM tip approaches the flat hydrophobic surface, the induced entropic forces were measured as a function of the separation distance. The measured force-distance curves are compared with a model of polymer-mediated entropic force between scale-free objects and the Alexander-de Gennes (AdG) theory for a polymer brush.

Thermodynamically reversible paths of the first fusion intermediate reveal an important role for membrane anchors of fusion proteins

Biological membrane fusion proceeds via an essential topological transition of the two membranes involved. Known players such as certain lipid species and fusion proteins are generally believed to alter the free energy and thus the rate of the fusion reaction. Quantifying these effects by theory poses a major challenge since the essential reaction intermediates are collective, diffusive and of a molecular length scale. We conducted molecular dynamics simulations in conjunction with a state-of-the-art string method to resolve the minimum free-energy path of the first fusion intermediate state, the so-called stalk. We demonstrate that the isolated transmembrane domains (TMDs) of fusion proteins such as SNARE molecules drastically lower the free energy of both the stalk barrier and metastable stalk, which is not trivially explained by molecular shape arguments. We relate this effect to the local thinning of the membrane (negative hydrophobic mismatch) imposed by the TMDs which favors the nearby presence of the highly bent stalk structure or prestalk dimple. The distance between the membranes is the most crucial determinant of the free energy of the stalk, whereas the free-energy barrier changes only slightly. Surprisingly, fusion enhancing lipids, i.e., lipids with a negative spontaneous curvature, such as PE lipids have little effect on the free energy of the stalk barrier, likely because of its single molecular nature. In contrast, the lipid shape plays a crucial role in overcoming the hydration repulsion between two membranes and thus rather lowers the total work required to form a stalk.

Molecular Order Affects Interfacial Water Structure and Temperature-Dependent Hydrophobic Interactions between Nonpolar Self-Assembled Monolayers

Understanding how material properties affect hydrophobic interactions-the water-mediated interactions that drive the association of nonpolar materials-is vital to the design of materials in contact with water. Conventionally, the magnitude of the hydrophobic interactions between extended interfaces is attributed to interfacial chemical properties, such as the amount of nonpolar solvent-exposed surface area. However, recent experiments have demonstrated that the hydrophobic interactions between uniformly nonpolar self-assembled monolayers (SAMs) also depend on molecular-level SAM order. In this work, we use atomistic molecular dynamics simulations to investigate the relationship between SAM order, water structure, and hydrophobic interactions to explain these experimental observations. The SAM-SAM hydrophobic interactions calculated from the simulations increase in magnitude as SAM order increases, matching experimental observations. We explain this trend by showing that the molecular-level order of the SAM impacts the nanoscale structure of interfacial water molecules, leading to an increase in water structure near disordered SAMs. These findings are consistent with a decrease in the solvation entropy of disordered SAMs, which is confirmed by measuring the temperature dependence of hydrophobic interactions using both simulations and experiments. This study elucidates how hydrophobic interactions can be influenced by an interfacial physical property, which may guide the design of synthetic materials with fine-tuned interfacial hydrophobicity.

Characterizing surface wetting and interfacial properties using enhanced sampling (SWIPES)

We introduce an accurate and efficient method for characterizing surface wetting and interfacial properties, such as the contact angle made by a liquid droplet on a solid surface, and the vapor-liquid surface tension of a fluid. The method makes use of molecular simulations in conjunction with the indirect umbrella sampling technique to systematically wet the surface and estimate the corresponding free energy. To illustrate the method, we study the wetting of a family of Lennard-Jones surfaces by water. For surfaces with a wide range of attractions for water, we estimate contact angles using our method, and compare them with contact angles obtained using droplet shapes. Notably, our method is able to capture the transition from partial to complete wetting as surface-water attractions are increased. Moreover, the method is straightforward to implement and is computationally efficient, providing accurate contact angle estimates in roughly 5 nanoseconds of simulation time.

Simulations of Nanoseparated Charged Surfaces Reveal Charge-Induced Water Reorientation and Nonadditivity of Hydration and Mean-Field Electrostatic Repulsion

We perform atomistic simulations of nanometer-separated charged surfaces in the presence of monovalent counterions at fixed water chemical potential. The counterion density profiles are well described by a modified Poisson-Boltzmann (MPB) approach that accounts for nonelectrostatic ion-surface interactions, while the effects of smeared-out surface-charge distributions and dielectric profiles are found to be relatively unimportant. The simulated surface interactions are for weakly charged surfaces well described by the additive contributions of hydration and MPB repulsions, but already for a moderate surface charge density of σ = -0.77 e/nm² this additivity breaks down. This we rationalize by a combination of different effects, namely, counterion correlations as well as the surface charge-induced reorientation of hydration water, which modifies the effective water dielectric constant as well as the hydration repulsion.

Trapped Aqueous Films Lubricate Highly Hydrophobic Surfaces

Friction at hydrophobic surfaces in aqueous media is ubiquitous ( e.g., prosthetic implants, contact lenses, microfluidic devices, biological tissue) but is not well understood. Here, we measure directly, using a surface force balance, both normal stresses and sliding friction in an aqueous environment between a hydrophilic surface (single-crystal mica) and the stable, molecularly smooth, highly hydrophobic surface of a spin-cast fluoropolymer film. Normal force versus surface separation profiles indicate a high negative charge density at the water-immersed fluoropolymer surface, consistent with previous studies. Sliding of the compressed surfaces under water or in physiological-level salt solution (0.1 M NaCl) reveals strikingly low boundary friction (friction coefficient μ ≈ 0.003-0.009) up to contact pressures of at least 50 atm. This is attributed largely to hydrated counterions (protons and Na⁺ ions) trapped in thin interfacial films between the compressed, sliding surfaces. Our results reveal how frictional dissipation may occur at hydrophobic surfaces in water and how modification of such surfaces may suppress this dissipation.

Solvent-mediated interactions between nanostructures: From water to Lennard-Jones liquid

Solvent-mediated interactions emerge from complex mechanisms that depend on the solute structure, its wetting properties, and the nature of the liquid. While numerous studies have focused on the first two influences, here, we compare the results from water and Lennard-Jones liquid in order to reveal to what extent solvent-mediated interactions are universal with respect to the nature of the liquid. Besides the influence of the liquid, the results were obtained with classical density functional theory and brute-force molecular dynamics simulations which allow us to contrast these two numerical techniques.

Surface microstructure engenders unusual hydrophobicity in phyllosilicates

We present a mechanism of intriguing polar hydrophobicity of a series of naturally formed minerals: their surface cavities can effectively trap water molecules, and the water trapping remarkably disrupts the hydrogen bond interaction among interfacial water and leads to considerable hydrophobicity. Diminishing water trapping by decreasing surface roughness can considerably enhance wettability, which illustrates that a Wenzel model is no longer valid for polar materials with atomic-scale roughness.

Interstitial Water Enhances Sliding Friction

This study examines how surfaces with different water contact angles (wettability) affect dry and underwater adhesion and friction. These studies were conducted by bringing a deformable hydrophobic poly(dimethylsiloxane) lens in contact with surfaces of gradient wettability. On the basis of our adhesion and friction results, we divide the results in three regions. In region I (water contact angles greater than 80°), the dry adhesion is lower than underwater adhesion. In contrast, in region III, (water contact angles less than 50°), the dry adhesion is higher than underwater adhesion. For surfaces with water contact angles between 50 and 80° (region II), the dry and wet adhesion values are comparable. Interestingly, in this region II, the underwater coefficient of friction (COF) values are higher than those in regions I and III. We have used surface-sensitive sum frequency generation (SFG) spectroscopy to probe whether the contact interface in static conditions and during dynamic sliding is dry or wet. The SFG results reveal that the contact is dry in region I. If this dry contact is maintained, the underwater COF follows the trend of adhesion hysteresis in dry conditions (adhesion hysteresis decreases with an increase in water contact angles). In region III, the contact is wet and the underwater COF follows the trend for adhesion hysteresis in wet conditions (adhesion hysteresis increases with an increase in water contact angles). By knowing whether the contact interfaces are dry or wet, we can relate the trends in COF with the trends in adhesion hysteresis. For conditions where the contact interfaces have both dry and wet patches (region II), the COF values are higher than those in completely dry conditions, suggesting that a partially lubricated system can exhibit a higher COF.

Hydrophobic Attraction Measured between Asymmetric Hydrophobic Surfaces

The interaction forces between silica surfaces modified to different degrees of hydrophobicity were measured using colloidal probe atomic force microscopy (AFM). A highly hydrophobic silica particle was prepared with octadecyltrichlorosilane (OTS), and the interaction forces were measured against silica substrates modified to produce surfaces of varying hydrophobicity. The interaction forces between the highly hydrophobic particle and a completely hydrophilic silicon wafer surface fitted well to the DLVO theory, indicating that no additional (non-DLVO) forces act between the surfaces. When the silicon wafer surface was treated to produce a contact angle of water on surface of 40°, an additional attractive force that is longer ranged than the van der Waals force was observed between the surfaces. The range and magnitude of the attractive force increase with the contact angle of water on the substrate. Beyond the effect on the contact angle, the hydrocarbon chain length and the terminal groups of hydrophobic layer on the substrate only have a minor effect on the magnitude of the force, even when the substrate is terminated with polar carboxyl groups, provided the hydrophobicity of the other surface is high.

Bomb swab: Can trace explosive particle sampling and detection be improved?

The marked increase in international terror in recent years requires the development of highly efficient methods to detect trace amounts of explosives at airports, border crossings and check points. The preferred analytical method worldwide is the ion mobility spectrometry (IMS) that is capable of detecting most explosives at the nano-gram level. Sample collection for the IMS analysis is based on swabbing of a passenger's belongings to collect possible explosive residues. The present study examines a wide range of issues related to swab-based particle collection and analysis, in the hope of gaining deeper understanding into this technique that will serve to improve the detection process. The adhesion of explosive particles to three typical materials, plastic, metal and glass, were measured using atomic force microscopy (AFM). We found that a strong contribution of capillary forces to adhesion on glass and metal surfaces renders these substrates more promising materials upon which to find and collect explosive residues. The adhesion of explosives to different swipe materials was also examined. Here we found that Muslin, Nomex^® and polyamide membrane surfaces are the most promising materials for use as swipes. Subsequently, the efficiency of multiple swipe use - for collecting explosive residues from a glass surface using Muslin, Nomex^® and Teflon™ swipes - was examined. The study suggests that swipes used in about 5-10 "sampling and analysis cycles" have higher efficiency as compared to new unused swipes. The reason for this behavior was found to be related to the increased roughness of the swipe surface following a few swab measurements. Lastly, GC-MS analysis was employed to examine the nature of contaminants collected by the three types of swipe. The relative amounts of different contaminants are reported. The existence and interference of these contaminants have to be considered in relation to the detection efficiency of the various explosives by the IMS.

New Information on the Hydrophobic Interaction Revealed by Frequency Modulation AFM

Using ultrahigh resolution atomic force microscopy (AFM) operated in frequency modulation mode, we extend existing measurements of the force acting between hydrophobic surfaces immersed in water in three essential ways. (1) The measurement range, which was previously limited to distances longer than 2-3 nm, is extended to cover all distances, down to contact. The measurements disclose that the long-range attraction observed also by conventional techniques, turns at distances shorter than 1-2 nm into pronounced repulsion. (2) Simultaneous measurements of the dissipative component of the tip-surface interaction reveal an anomalously large dissipation commencing abruptly at the point where attraction begins. The dissipation is more than 2 orders of magnitude larger than expected from bulk water viscosity or from similar measurements between hydrophilic surfaces. (3) The short-range repulsion is oscillatory, indicating molecular ordering of the medium as the hydrophobic surfaces approach each other. The oscillation period, ∼0.5 nm, is larger than the ∼0.3 nm period observed with hydrophilic surfaces. Their range, ∼1.5 nm, is longer as well. These observations are consistent with a conspicuous change in the properties of the surrounding medium, taking place simultaneously with the onset of attraction as the two surfaces approach each other.

Specific Ion Effects and pH Dependence on the Interaction Forces between Polystyrene Particles

Colloidal interactions have been extensively studied due to the wide number of applications where colloids are present. In general, the electric double layer force and the van der Waals interaction dominate the net force acting between two colloids at large separation distances. However, it is well accepted that some other phenomena, especially those acting at short separation distances, might be relevant and induce substantial changes in the force profiles. Within these phenomena, those related to the surface contact angle, the hydration degree of the ions, or the pH, may dominate the force profiles features, not only at short distances. In this paper, we analyzed the effect of the pH and counterion type on the long-range as well as short-range forces between polystyrene colloidal particles by using the colloidal probe technique based on AFM. Our results confirm that the features of the force profiles between polystyrene surfaces are strongly affected by the pH and hydration degree of the counterions in solution. Additionally, we performed a study of the role of the pH on the wettability properties of hydrated and nonhydrated polystyrene sheets to scan the wettability properties of this material with pH. Contact angle measurements confirmed that the polystyrene surface is hydrophobic in aqueous solutions over the entire range of pHs investigated. These results are in good agreement with the features observed in the force profiles at low pH. At high pH, a short-range repulsion similar to the one observed for hydrophilic materials is observed. This repulsion scales with the pH, and it also depends on the hydration degree of the ions in solution. This way, the short-range forces between polystyrene surfaces may be tunable with the pH, and its origin does not seem to be related to the hydrophobicity of the material.

Water-Mediated Interactions between Hydrophilic and Hydrophobic Surfaces

All surfaces in water experience at short separations hydration repulsion or hydrophobic attraction, depending on the surface polarity. These interactions dominate the more long-ranged electrostatic and van der Waals interactions and are ubiquitous in biological and colloidal systems. Despite their importance in all scenarios where the surface separation is in the nanometer range, the origin of these hydration interactions is still unclear. Using atomistic solvent-explicit molecular dynamics simulations, we analyze the interaction free energies of charge-neutral model surfaces with different elastic and water-binding properties. The surface polarity is shown to be the most important parameter that not only determines the hydration properties and thereby the water contact angle of a single surface but also the surface-surface interaction and whether two surfaces attract or repel. Elastic properties of the surfaces are less important. On the basis of surface contact angles and surface-surface binding affinities, we construct a universal interaction diagram featuring three different interaction regimes-hydration repulsion, cavitation-induced attraction-and for intermediate surface polarities-dry adhesion. On the basis of scaling arguments and perturbation theory, we establish simple combination rules that predict the interaction behavior for combinations of dissimilar surfaces.