Tunable green syngas generation from CO2 and H2O with sunlight as the only energy input

Solar-Driven Sustainability: III-V Semiconductor for Green Energy Production Technologies

Long-term societal prosperity depends on addressing the world's energy and environmental problems, and photocatalysis has emerged as a viable remedy. Improving the efficiency of photocatalytic processes is fundamentally achieved by optimizing the effective utilization of solar energy and enhancing the efficient separation of photogenerated charges. It has been demonstrated that the fabrication of III-V semiconductor-based photocatalysts is effective in increasing solar light absorption, long-term stability, large-scale production and promoting charge transfer. This focused review explores on the current developments in III-V semiconductor materials for solar-powered photocatalytic systems. The review explores on various subjects, including the advancement of III-V semiconductors, photocatalytic mechanisms, and their uses in H2 conversion, CO2 reduction, environmental remediation, and photocatalytic oxidation and reduction reactions. In order to design heterostructures, the review delves into basic concepts including solar light absorption and effective charge separation. It also highlights significant advancements in green energy systems for water splitting, emphasizing the significance of establishing eco-friendly systems for CO2 reduction and hydrogen production. The main purpose is to produce hydrogen through sustainable and ecologically friendly energy conversion. The review intends to foster the development of greener and more sustainable energy source by encouraging researchers and developers to focus on practical applications and advancements in solar-powered photocatalysis.

An Active and Robust Catalytic Architecture of NiCo/GaN Nanowires for Light-Driven Hydrogen Production from Methanol

On-site hydrogen production from liquid organic hydrogen carriers e.g., methanol provides an emerging strategy for the safe storage and transportation of hydrogen. Herein, a catalytic architecture consisting of nickel-cobalt nanoclusters dispersed on gallium nitride nanowires supported by silicon for light-driven hydrogen production from methanol is reported. By correlative microscopic, spectroscopic characterizations, and density functional theory calculations, it is revealed that NiCo nanoclusters work in synergy with GaN nanowires to enable the achievement of a significantly reduced activation energy of methanol dehydrogenation by switching the potential-limiting step from *CHO → *CO to *CH3O → *CH2O. In combination with the marked photothermal effect, a high hydrogen rate of 5.62 mol·gcat-1·h-1 with a prominent turnover frequency of 43,460 h-1 is achieved at 5 Wcm-2 without additional energy input. Remarkably, the synergy between Co and Ni, in combination with the unique surface of GaN, renders the architecture with outstanding resistance to sintering and coking. The architecture thereby exhibits a high turnover number of >16,310,000 over 600 h. Outdoor testing validates the viability of the architecture for active and robust hydrogen evolution under natural concentrated sunlight. Overall, this work presents a promising architecture for on-site hydrogen production from CH3OH by virtually unlimited solar energy.

Solar-Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges

Hydrogen (H2) has emerged as a clean and versatile energy carrier to power a carbon-neutral economy for the post-fossil era. Hydrogen generation from low-cost and renewable biomass by virtually inexhaustible solar energy presents an innovative strategy to process organic solid waste, combat the energy crisis, and achieve carbon neutrality. Herein, the progress and breakthroughs in solar-powered H2 production from biomass are reviewed. The basic principles of solar-driven H2 generation from biomass are first introduced for a better understanding of the reaction mechanism. Next, the merits and shortcomings of various semiconductors and cocatalysts are summarized, and the strategies for addressing the related issues are also elaborated. Then, various bio-based feedstocks for solar-driven H2 production are reviewed with an emphasis on the effect of photocatalysts and catalytic systems on performance. Of note, the concurrent generation of value-added chemicals from biomass reforming is emphasized as well. Meanwhile, the emerging photo-thermal coupling strategy that shows a grand prospect for maximally utilizing the entire solar energy spectrum is also discussed. Further, the direct utilization of hydrogen from biomass as a green reductant for producing value-added chemicals via organic reactions is also highlighted. Finally, the challenges and perspectives of photoreforming biomass toward hydrogen are envisioned.

Rh/InGaN1-xOx nanoarchitecture for light-driven methane reforming with carbon dioxide toward syngas

Light-driven dry reforming of methane toward syngas presents a proper solution for alleviating climate change and for the sustainable supply of transportation fuels and chemicals. Herein, Rh/InGaN1-xOx nanowires supported by silicon wafer are explored as an ideal platform for loading Rh nanoparticles, thus assembling a new nanoarchitecture for this grand topic. In combination with the remarkable photo-thermal synergy, the O atoms in Rh/InGaN1-xOx can significantly lower the apparent activation energy of dry reforming of methane from 2.96 eV downward to 1.70 eV. The as-designed Rh/InGaN1-xOx NWs nanoarchitecture thus demonstrates a measurable syngas evolution rate of 180.9 mmol gcat-1 h-1 with a marked selectivity of 96.3% under concentrated light illumination of 6 W cm-2. What is more, a high turnover number (TON) of 4182 mol syngas per mole Rh has been realized after six reuse cycles without obvious activity degradation. The correlative 18O isotope labeling experiments, in-situ irradiated X-ray photoelectron spectroscopy (ISI-XPS) and in-situ diffuse reflectance Fourier transform infrared spectroscopy characterizations, as well as density functional theory calculations reveal that under light illumination, Rh/InGaN1-xOx NWs facilitate releasing *CH3 and H+ from CH4 by holes, followed by H2 evolution from H+ reduction with electrons. Subsequently, the O atoms in Rh/InGaN1-xOx can directly participate in CO generation by reacting with the *C species from CH4 dehydrogenation and contributes to the coke elimination, in concurrent formation of O vacancies. The resultant O vacancies are then replenished by CO2, showing an ideal chemical loop. This work presents a green strategy for syngas production via light-driven dry reforming of methane.

Air-Promoted Light-Driven Hydrogen Production from Bioethanol over Core/Shell Cr2O3@GaN Nanoarchitecture

Light-driven hydrogen production from biomass derivatives offers a path towards carbon neutrality. It is often however operated with the limitations of sluggish kinetics and severe coking. Herein, a disruptive air-promoted strategy is explored for efficient and durable light-driven hydrogen production from ethanol over a core/shell Cr2O3@GaN nanoarchitecture. The correlative computational and experimental investigations show ethanol is energetically favorable to be adsorbed on the Cr2O3@GaN interface, followed by dehydrogenation toward acetaldehyde and protons by photoexcited holes. The released protons are then consumed for H2 evolution by photogenerated electrons. Afterward, O2 can be evolved into active oxygen species and promote the deprotonation and C-C cleavage of the key C2 intermediate, thus significantly lowering the reaction energy barrier of hydrogen evolution and removing the carbon residual with inhibited overoxidation. Consequently, hydrogen is produced at a high rate of 76.9 mole H2 per gram Cr2O3@GaN per hour by only feeding ethanol, air, and light, leading to the achievement of a turnover number of 266,943,000 mole H2 per mole Cr2O3 over a long-term operation of 180 hours. Notably, an unprecedented light-to-hydrogen efficiency of 17.6 % is achieved under concentrated light illumination. The simultaneous generation of aldehyde from ethanol dehydrogenation enables the process more economically promising.

Engineering 0D/2D Architecture of Ni(OH)2 Nanoparticles on Covalent Organic Framework Nanosheets for Selective Visible-Light-Driven CO2 Reduction

Low-dimensional materials serving as photocatalysts favor providing abundant unsaturated active sites and shortening the charge transport distance, but the high surface energy readily causes the aggregation that limits their application. Herein, it is demonstrated that 2D covalent organic framework (COF) TpBD nanosheets are effective in the dispersion and stabilization of 0D Ni(OH)2 . The COF precursor TpBD is synthesized from the Schiff base condensation of 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) and exfoliated into 2D nanosheets named BDNs via ultrasonication. The formation of highly dispersive 0D Ni(OH)2 on BDNs is reached under a mild weak basic condition, enabling robust active sites for CO2 adsorption/activation and rapid interface cascaded electron transport channels for the accumulation of long-lived photo-generated charges. The champion catalyst 30%Ni-BDNs effectively catalyze the CO2 to CO conversion under visible-light irradiation, offering a high CO evolution rate of 158.4 mmol g-1 h-1 and turnover frequency of 51 h-1 . By contrast, the counterpart photocatalyst, the bulk TpBD stabilized Ni(OH)2 , affords a much lower CO evolution rate and selectivity. This work demonstrates a new avenue to simultaneously construct efficient active sites and electron transport channels by coupling 0D metal hydroxides and 2D COF nanosheets for CO2 photoreduction.

Renewable Syngas Generation via Low-Temperature Electrolysis: Opportunities and Challenges

The production of syngas (i.e., a mixture of CO and H2) via the electrochemical reduction of CO2 and water can contribute to the green transition of various industrial sectors. Here we provide a joint academic-industrial perspective on the key technical and economical differences of the concurrent (i.e., CO and H2 are generated in the same electrolyzer cell) and separated (i.e., CO and H2 are electrogenerated in different electrolyzers) production of syngas. Using a combination of literature analysis, experimental data, and techno-economic analysis, we demonstrate that the production of synthesis gas is notably less expensive if we operate a CO2 electrolyzer in a CO-selective mode and combine it with a separate PEM electrolyzer for H2 generation. We also conclude that by the further decrease of the cost of renewable electricity and the increase of CO2 emission taxes, such prepared renewable syngas will become cost competitive.

Hydroxyl-Bonded Ru on Metallic TiN Surface Catalyzing CO2 Reduction with H2O by Infrared Light

Synchronized conversion of CO2 and H2O into hydrocarbons and oxygen via infrared-ignited photocatalysis remains a challenge. Herein, the hydroxyl-coordinated single-site Ru is anchored precisely on the metallic TiN surface by a NaBH4/NaOH reforming method to construct an infrared-responsive HO-Ru/TiN photocatalyst. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (ac-HAADF-STEM) and X-ray absorption spectroscopy (XAS) confirm the atomic distribution of the Ru species. XAS and density functional theory (DFT) calculations unveil the formation of surface HO-RuN5-Ti Lewis pair sites, which achieves efficient CO2 polarization/activation via dual coordination with the C and O atoms of CO2 on HO-Ru/TiN. Also, implanting the Ru species on the TiN surface powerfully boosts the separation and transfer of photoinduced charges. Under infrared irradiation, the HO-Ru/TiN catalyst shows a superior CO2-to-CO transformation activity coupled with H2O oxidation to release O2, and the CO2 reduction rate can further be promoted by about 3-fold under simulated sunlight. With the key reaction intermediates determined by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and predicted by DFT simulations, a possible photoredox mechanism of the CO2 reduction system is proposed.

Two-dimensional III-nitride alloys: electronic and chemical properties of monolayer Ga(1-x)AlxN

Potential applications of III-nitrides have led to their monolayer allotropes, i.e., two-dimensional (2D) III-nitrides, having attracted much attention. Recently, alloying has been demonstrated as an effective method to control the properties of 2D materials. In this study, the stability, and the electronic and chemical properties of monolayer Ga(1-x)AlxN alloys were investigated employing density functional theory (DFT) calculations and the cluster expansion (CE) method. The results show that 2D Ga(1-x)AlxN alloys are thermodynamically stable and complete miscibility in the alloys can be achieved at ambient temperature (>85 K). By analyzing CE results, the atomic arrangement of 2D Ga(1-x)AlxN was revealed, showing that Ga/Al atoms tend to mix with the Al/Ga atoms in their next nearest site. The band gaps of Ga(1-x)AlxN random alloys can be tuned by varying the chemical composition, and the corresponding bowing parameter was calculated as -0.17 eV. Biaxial tensile strain was also found to change the band gap values of Ga(1-x)AlxN random alloys ascribed to its modifications to the CBM positions. The chemical properties of Ga(1-x)AlxN can also be significantly altered by strain, making them good candidates as photocatalysts for water splitting. The present study can play a crucial role in designing and optimizing 2D III-nitrides for next-generation electronics and photocatalysis.

Mechanistic Insight into Acceptorless Dehydrogenation of Methanol to Syngas Catalyzed by MACHO-Type Ruthenium and Manganese Complexes: A DFT Study

The acceptorless dehydrogenation of methanol to produce carbon monoxide (CO) and dihydrogen (H2) mediated by MACHO-type 1-Ru and 1-Mn complexes was theoretically investigated via density functional theory calculations. The 1-Ru-catalyzed process involves the formation of active species 4-Ru through a methanol-bridged H2 release pathway. Methanol dehydrogenation by 4-Ru yields formaldehyde and 1-Ru, followed by H2 release to regenerate 4-Ru (rate-determining step, ΔG‡ = 32.5 kcal/mol). Formaldehyde further reacts with methanol via nucleophilic attack of the MeO- ligand in the Ru complex (ΔG‡ = 9.6 kcal/mol), which is more favorable than the traditional methanol-to-formaldehyde nucleophilic attack (ΔG‡ = 33.8 kcal/mol) due to the higher nucleophilicity of MeO-. CO is ultimately produced through the methyl formate decarbonylation reaction. Accelerated H2 release in the early reaction stage compared to CO results from the initial methanol dehydrogenation and condensation of formaldehyde with methanol. In contrast, CO generation occurs later via methyl formate decarbonylation. The 1-Mn-catalyzed reaction has reduced efficiency compared to 1-Ru for the higher Gibbs energy barrier (ΔG‡ = 34.1 kcal/mol) of the rate-determining step. Excess NaOtBu promotes the reaction of CO and methanol, forming methyl formate, significantly reducing the CO/H2 ratio as the catalyst amount decreases. These findings deepen our understanding of the methanol-to-syngas transformation and can drive progress in this field.

A semiconducting hybrid of RhOx/GaN@InGaN for simultaneous activation of methane and water toward syngas by photocatalysis

Prior to the eventual arrival of carbon neutrality, solar-driven syngas production from methane steam reforming presents a promising approach to produce transportation fuels and chemicals. Simultaneous activation of the two reactants, i.e. methane and water, with notable geometric and polar discrepancy is at the crux of this important subject yet greatly challenging. This work explores an exceptional semiconducting hybrid of RhOx/GaN@InGaN nanowires for overcoming this critical challenge to achieve efficient syngas generation from methane steam reforming by photocatalysis. By coordinating density functional theoretical calculations and microscopic characterizations, with in situ spectroscopic measurements, it is found that the multifunctional RhOx/GaN interface is effective for simultaneously activating both CH4 and H2O by stretching the C-H and O-H bonds because of its unique Lewis acid/base attribute. With the aid of energetic charge carriers, the stretched C-H and O-H bonds of reactants are favorably cleaved, resulting in the key intermediates, i.e. *CH3, *OH, and *H, to sit on Rh sites, Rh sites, and N sites, respectively. Syngas is subsequently produced via energetically favored pathway without additional energy inputs except for light. As a result, a benchmarking syngas formation rate of 8.1 mol·gcat-1·h-1 is achieved with varied H2/CO ratios from 2.4 to 0.8 under concentrated light illumination of 6.3 W·cm-2, enabling the achievement of a superior turnover number of 10,493 mol syngas per mol Rh species over 300 min of long-term operation. This work presents a promising strategy for green syngas production from methane steam reforming by utilizing unlimited solar energy.

Photocatalytic CO2 Reduction with Dissolved Carbonates and Near-Zero CO2(aq) by Employing Long-Range Proton Transport

Photocatalytic CO₂ reduction (CO₂R) in ∼0 mM CO₂(aq) concentration is challenging but is relevant for capturing CO₂ and achieving a circular carbon economy. Despite recent advances, the interplay between the CO₂ catalytic reduction and the oxidative redox processes that are arranged on photocatalyst surfaces with nanometer-scale distances is less studied. Specifically, mechanistic investigation on interdependent processes, including CO₂ adsorption, charge separation, long-range chemical transport (∼100 nm distance), and bicarbonate buffer speciation, involved in photocatalysis is urgently needed. Photocatalytic CO₂R in ∼0 mM CO₂(aq), which has important applications in integrated carbon capture and utilization (CCU), has rarely been studied. Using 0.1 M KHCO₃ (aq) of pH 7 but without continuously bubbling CO₂, we achieved ∼0.1% solar-to-fuel conversion efficiency for CO production using Ag@CrO_x nanoparticles that are supported on a coating-protected GaInP₂ photocatalytic panel. CO is produced at ∼100% selectivity with no detectable H₂, even with copious protons co-generated nearby. CO₂ flux to the Ag@CrO_x CO₂R sites enhances CO₂ adsorption, probed by in situ Raman spectroscopy. CO is produced with local protonation of dissolved inorganic carbon species in a pH as high as 11.5 when using fast electron donors such as ethanol. Isotopic labeling using KH¹³CO₃ was used to confirm the origin of CO from the bicarbonate solution. We then employed COMSOL Multiphysics modeling to simulate the spatial and temporal pH variation and the local concentrations of bicarbonates and CO₂(aq). We found that light-driven CO₂R and CO₂ reactive transport are mutually dependent, which is important for further understanding and manipulating CO₂R activity and selectivity. This study enables direct bicarbonate utilization as the source of CO₂, thereby achieving CO₂ capture and conversion without purifying and feeding gaseous CO₂.