Definition of oriR, the minimum DNA segment essential for initiation of R1 plasmid replication in vitro

Going around in circles: virulence plasmids in enteric pathogens

Plasmids have a major role in the development of disease caused by enteric bacterial pathogens. Virulence plasmids are usually large (>40 kb) low copy elements and encode genes that promote host-pathogen interactions. Although virulence plasmids provide advantages to bacteria in specific conditions, they often impose fitness costs on their host. In this Review, we discuss virulence plasmids in Enterobacteriaceae that are important causes of diarrhoea in humans, Shigella spp., Salmonella spp., Yersinia spp and pathovars of Escherichia coli. We contrast these plasmids with those that are routinely used in the laboratory and outline the mechanisms by which virulence plasmids are maintained in bacterial populations. We highlight examples of virulence plasmids that encode multiple mechanisms for their maintenance (for example, toxin-antitoxin and partitioning systems) and speculate on how these might contribute to their propagation and success.

Mutations of DnaA-boxes in the oriR region increase replication frequency of the MiniR1-1 plasmid

BACKGROUND

The MiniR1-1 plasmid is a derivative of the R1 plasmid, a low copy cloning vector.

RESULTS

Nucleotide sequencing analysis shows that the MiniR1-1 plasmid is a 6316 bp circular double-stranded DNA molecule with an oriR1 (origin for replication). The plasmid carries the repA, tap, copA and bla genes, and genes for ORF1 and ORF2. MiniR1-1 contains eight DnaA-binding sites (DnaA-boxes). DnaA-box1 is in the oriR1 region and fully matched to the DnaA-box consensus sequence, and DnaA-box8, with one mismatch, is close to the copA gene. The presence of the MiniR1-1 plasmid leads to an accumulation of the D-period cells and an increase in cell size of slowly growing Escherichia coli cells, suggesting that the presence of MiniR1-1 delays cell division. Mutations in the MiniR1-1 DnaA-box1 and DnaA-box8 significantly increase the copy number of the plasmid and the mutations in DnaA-box1 also affect cell size. It is likely that titration of DnaA to DnaA-boxes negatively controls replication of the MiniR1-1 plasmid and delays cell division. Interestingly, DnaA weakly interacts with the initiator protein RepA in vivo.

CONCLUSION

DnaA regulates the copy number of MiniR1-1 as a negative factor through interacting with the RepA protein.

Historical Events That Spawned the Field of Plasmid Biology

This chapter revisits the historical development and outcome of studies focused on the transmissible, extrachromosomal genetic elements called plasmids. Early work on plasmids involved structural and genetic mapping of these molecules, followed by the development of an understanding of how plasmids replicate and segregate during cell division. The intriguing property of plasmid transmission between bacteria and between bacteria and higher cells has received considerable attention. The utilitarian aspects of plasmids are described, including examples of various plasmid vector systems. This chapter also discusses the functional attributes of plasmids needed for their persistence and survival in nature and in man-made environments. The term plasmid biology was first conceived at the Fallen Leaf Lake Conference on Promiscuous Plasmids, 1990, Lake Tahoe, California. The International Society for Plasmid Biology was established in 2004 (www.ISPB.org).

Library construction, selection and modification strategies to generate therapeutic peptide-based modulators of protein-protein interactions

In the modern age of proteomics, vast numbers of protein-protein interactions (PPIs) are being identified as causative agents in pathogenesis, and are thus attractive therapeutic targets for intervention. Although traditionally regarded unfavorably as druggable agents relative to small molecules, peptides in recent years have gained considerable attention. Their previous dismissal had been largely due to the susceptibility of unmodified peptides to the barriers and pressures exerted by the circulation, immune system, proteases, membranes and other stresses. However, recent advances in high-throughput peptide isolation techniques, as well as a huge variety of direct modification options and approaches to allow targeted delivery, mean that peptides and their mimetics can now be designed to circumvent many of these traditional barriers. As a result, an increasing number of peptide-based drugs are reaching clinical trials and patients beyond.

Molecular characterization of a multidrug resistance IncF plasmid from the globally disseminated Escherichia coli ST131 clone

Escherichia coli sequence type 131 (E. coli ST131) is a recently emerged and globally disseminated multidrug resistant clone associated with urinary tract and bloodstream infections. Plasmids represent a major vehicle for the carriage of antibiotic resistance genes in E. coli ST131. In this study, we determined the complete sequence and performed a comprehensive annotation of pEC958, an IncF plasmid from the E. coli ST131 reference strain EC958. Plasmid pEC958 is 135.6 kb in size, harbours two replicons (RepFIA and RepFII) and contains 12 antibiotic resistance genes (including the bla_CTX-M-15 gene). We also carried out hyper-saturated transposon mutagenesis and multiplexed transposon directed insertion-site sequencing (TraDIS) to investigate the biology of pEC958. TraDIS data showed that while only the RepFII replicon was required for pEC958 replication, the RepFIA replicon contains genes essential for its partitioning. Thus, our data provides direct evidence that the RepFIA and RepFII replicons in pEC958 cooperate to ensure their stable inheritance. The gene encoding the antitoxin component (ccdA) of the post-segregational killing system CcdAB was also protected from mutagenesis, demonstrating this system is active. Sequence comparison with a global collection of ST131 strains suggest that IncF represents the most common type of plasmid in this clone, and underscores the need to understand its evolution and contribution to the spread of antibiotic resistance genes in E. coli ST131.

A personal reflection on the replicon theory: from R1 plasmid to replication timing regulation in human cells

Fifty years after the Replicon Theory was originally presented, detailed mechanistic insight into prokaryotic replicons has been obtained and rapid progress is being made to elucidate the more complex regulatory mechanisms of replicon regulation in eukaryotic cells. Here, I present my personal perspectives on how studies of model replicons have contributed to our understanding of the basic mechanisms of DNA replication as well as the evolution of replication regulation in human cells. I will also discuss how replication regulation contributes to the stable maintenance of the genome and how disruption of replication regulation leads to human diseases.

Biotechnology techniques for the development of new tumor specific peptides

Peptides, proteins and antibodies are promising candidates as carriers for radionuclides in endoradiotherapy. This novel class of pharmaceuticals offers a great potential for the targeted therapy of cancer. The fact that some receptors are overexpressed in several tumor types and can be targeted by small peptides, proteins or antibodies conjugated to radionuclides has been used in the past for the development of peptide endoradiotherapeutic agents such as (90)Y-DOTATOC or radioimmunotherapy of lymphomas with Zevalin. These procedures have been shown to be powerful options for the treatment of cancer patients. Design of new peptide libraries and scaffolds combined with biopanning techniques like phage and ribosome display may lead to the discovery of new specific ligands for target structures overexpressed in malignant tumors. Display methods are high throughput systems which select for high affinity binders. These methods allow the screening of a vast amount of potential binding motifs which may be exposed to either cells overexpressing the target structures or in a cell-free system to the protein itself. Labelling these binders with radionuclides creates new potential tracers for application in diagnosis and endoradiotherapy. This review highlights the advantages and problems of phage and ribosome display for the identification and evaluation of new tumor specific peptides.

Identification of different agrobacterium strains isolated from the same forest nursery

Several Agrobacterium strains isolated from the same forest nursery from 1982 to 1988 were compared by serological, biochemical, and DNA-DNA hybridization methods. Similarities among strains belonging to biovar 2 were observed by indirect immunofluorescence, whereas biovar 1 strains showed serological heterogeneity. Electrophoretic analysis of bacterial envelope-associated proteins showed that few bands appeared in the strains belonging to biovar 1, whereas many proteins appeared in the case of biovar 2 strains. Chromosomal DNA was analyzed with six random C58 chromosomal fragments. None of the six probes hybridized to the DNA of the two biovar 2 strains. One of the probes gave the same hybridization pattern with all biovar 1 strains, whereas the other probes yielded different patterns. The vir regions were closely related in the different pathogenic strains. The T-DNA and replication regions were less conserved and showed some variations among the strains.

Plasmid R1--replication and its control

Plasmid R1 is a low-copy-number plasmid belonging to the IncFII group. The genetics, biochemistry, molecular biology, and physiology of R1 replication and its control are summarised and discussed in the present communication. Replication of R1 starts at a unique origin, oriR1, and proceeds unidirectionally according to the Theta mode. Plasmid R1 replicates during the entire cell cycle and the R1 copies in the cell are members of a pool from which a plasmid copy at random is selected for replication. However, there is an eclipse period during which a newly replicated copy does not belong to this pool. Replication of R1 is controlled by an antisense RNA, CopA, that is unstable and formed constitutively; hence, its concentration is a measure of the concentration of the plasmid. CopA-RNA interacts with its complementary target, CopT-RNA, that is located upstream of the RepA message on the repA-mRNA. CopA-RNA post-transcriptionally inhibits translation of the repA-mRNA. CopA- and CopT-RNA interact in a bimolecular reaction which results in an inverse proportionality between the relative rate of replication (replications per plasmid copy and cell cycle) and the copy number; the number of replications per cell and cell cycle, n, is independent of the actual copy number in the individual cells, the so-called +n mode of control. Single base-pair substitutions in the copA/copT region of the plasmid genome may result in mutants that are compatible with the wild type. Loss of CopA activity results in (uncontrolled) so-called runaway replication, which is lethal to the host but useful for the production of proteins from cloned genes. Plasmid R1 also has an ancillary control system, CopB, that derepresses the synthesis of repA-mRNA in cells that happen to contain lower than normal number of copies. Plasmid R1, as other plasmids, form clusters in the cell and plasmid replication is assumed to take place in the centre of the cells; this requires traffic from the cluster to the replication factories and back to the clusters. The clusters are plasmid-specific and presumably based on sequence homology.

CIS display: In vitro selection of peptides from libraries of protein-DNA complexes

We describe the development of an in vitro library selection system (CIS display) that exploits the ability of a DNA replication initiator protein (RepA) to bind exclusively to the template DNA from which it has been expressed, a property called cis-activity. A diverse peptide library is created by ligation of DNA fragments of random sequence to a DNA fragment that encodes RepA. After in vitro transcription and translation, a pool of protein-DNA complexes is formed where each protein is stably associated with the DNA that encodes it. These complexes are amenable to the affinity selection of ligands to targets of interest. Here we show that RepA is a highly faithful cis-acting DNA-binding protein and demonstrate that libraries encoding >10(12) random 18-mer peptides can be constructed and used to isolate peptides that bind specifically to disparate targets. The use of DNA to encode the displayed peptides offers advantages over in vitro peptide display systems that use mRNA.

Change of plasmid DNA structure, hypermethylation, and Lon-proteolysis as steps in a replicative cascade

I have defined conditions under which RepFIC plasmid DNA can be maintained in a state of lowered helical density. In exponentially growing cultures, the DNA of lowered helical density is present in small amounts but never totally absent, suggesting that it is a normal variant of plasmid maintenance. It is fully methylated at frequent sites by dam-methyltransferase, some not previously recognized, further suggesting that the variant is a precursor of replication. The low-helical density plasmid is present in dam hosts, indicating that methylation is not essential for the change in helical density. The lowered helical density is stabilized in lon hosts, suggesting that Lon-protease may remove both the protein(s) that lower the helical density and the dam-methyltransferase after each round of replication.

Effect of CIS on activity in trans of the replication initiator protein of an IncB plasmid

RepA, the replication initiator protein of the IncB plasmid pMU720, acts preferentially in cis. The cis activity of RepA is thought to be mediated by CIS, a 166-bp region of DNA separating the coding region of repA from the origin of replication (ori) of pMU720. To investigate the trans activity of RepA, the repA gene, without its cognate ori, was cloned on a multicopy plasmid, pSU39. The ori on which RepA acts was cloned on pAM34, a plasmid whose replicon is inactive without induction by isopropyl-beta-D-thiogalactopyranoside (IPTG). Thus, in the absence of IPTG, replication of the pAM34 derivatives was dependent on activation of the cloned ori by RepA produced in trans from the pSU39 derivatives. The effect of CIS, when present either on the RepA-producing or the ori plasmid or both, on the efficiency of replication of the ori plasmid in vivo, was determined. The presence of CIS, in its native position and orientation, on the RepA-producing plasmid reduced the efficiency of replication of the ori plasmid. This inhibitory activity of CIS was sequence specific and involved interaction with the C-terminal 20 to 37 amino acids of RepA. By contrast, CIS had no effect when present on the ori plasmid. Initiation of replication from the ori in trans was independent of transcription into CIS.

Molecular clocks reduce plasmid loss rates: the R1 case

Plasmids control their replication so that the replication frequency per plasmid copy responds to the number of plasmid copies per cell. High sensitivity amplification in replication response to copy number deviations generally reduces variation in copy numbers between different single cells, thereby reducing the plasmid loss rate in a cell population. However, experiments show that plasmid R1 has a gradual, insensitive replication control predicting considerable copy number variation between single cells. The critical step in R1 copy number control is regulation of synthesis of a rate-limiting cis-acting replication protein, RepA. De novo synthesis of a large number of RepA molecules is required for replication, suggesting that copy number control is exercised at multiple steps. In this theoretical kinetic study we analyse R1 multistep copy number control and show that it results in the insensitive replication response found experimentally but that it at the same time effectively prohibits the existence of only one plasmid copy in a dividing cell. In combination with the partition system of R1, this can lead to very high segregational stability. The R1 control mechanism is compared to the different multistep copy number control of plasmid ColE1 that is based on conventional sensitivity amplification. This implies that while copy number control for ColE1 efficiently corrects for fluctuations that have already occurred, R1 copy number control prevents their emergence in cells that by chance start their cycle with only one plasmid copy. We also discuss how regular, clock-like, behaviour of single plasmid copies becomes hidden in experiments probing collective properties of a population of plasmid copies because the individual copies are out of phase. The model is formulated using master equations, taking a stochastic approach to regulation, but the mathematical formalism is kept to a minimum and the model is simplified to its bare essence. This simplicity makes it possible to extend the analysis to other replicons with similar design principles.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.

Role of the RepA1 protein in RepFIC plasmid replication

Using a sensitive primer extension technique, we have carried out studies to localize the start site of replication of the replicon RepFIC. In the course of these studies, we have found evidence that supports the hypothesis that transcription is an integral component of the initiation of replication. On the basis of our findings, we suggest that the transcript is processed to act as a primer, and therefore we propose that the transcript has a dual role as primer of replication and mRNA for the RepA1 protein. We present a model, based on our evidence, for the initiation of replication of the replicon RepFIC. This model provides as well an alternative explanation for what has been called the cis action of RepA1, and we show that RepA1 may act in trans as well as in cis.

Interaction of the IciA protein with AT-rich regions in plasmid replication origins

A set of AT-rich repeats is a common motif in prokaryotic replication origins. We have screened for proteins binding to the AT-rich repeat region in plasmids F, R1 and pSC101 using an electrophoretic mobility shift assay with PCR-amplified DNA fragments from the origins. The IciA protein, which is known to bind to the AT-rich repeat region in the Escherichia coli origin of chromosome replication, oriC, was found to bind to the corresponding region from plasmids F (oriS) and R1, but not to pSC101. DNase I footprint analysis showed that IciA interacted with the AT-rich region in both F and R1. When the IciA gene was deleted, the copy number of plasmid F increased somewhat, whereas there was no major effect on the replication of pSC101 and R1, or on the E. coli chromosome.

The heat-shock DnaK protein is required for plasmid R1 replication and it is dispensable for plasmid ColE1 replication

Plasmid R1 replication in vitro is inactive in extracts prepared from a dnaK756 strain but is restored to normal levels upon addition of purified DnaK protein. Replication of R1 in extracts of a dnaKwt strain can be specifically inhibited with polyclonal antibodies against DnaK. RepA-dependent replication of R1 in dnaK756 extracts supplemented with DnaKwt protein at maximum concentration is partially inhibited by rifampicin and it is severely inhibited at sub-optimal concentrations of DnaK protein. The copy number of a run-away R1 vector is reduced in a dnaK756 background at 30 degrees C and at 42 degrees C the amplification of the run-away R1 vector is prevented. However a runaway R1 vector containing dnaK gene allows the amplification of the plasmid at high temperature. These data indicate that DnaK is required for both in vitro and in vivo replication of plasmid R1 and show a partial compensation for the low level of DnaK by RNA polymerase. In contrast ColE1 replication is not affected by DnaK as indicated by the fact that ColE1 replicates with the same efficiency in extracts from dnaKwt and dnaK756 strains.

Insertion and deletion mutations in the repA4 region of the IncFII plasmid NR1 cause unstable inheritance

Mutants of IncFII plasmid NR1 that have transposons inserted in the repA4 open reading frame (ORF) are not inherited stably. The repA4 ORF is located immediately downstream from the replication origin (ori). The repA4 coding region contains inverted-repeat sequences that are homologous to the terC inverted repeats located in the replication terminus of the Escherichia coli chromosome. The site of initiation of leading-strand synthesis for replication of NR1 is also located in repA4 near its 3' end. Transposon insertions between ori and the right-hand terC repeat resulted in plasmid instability, whereas transposon insertions farther downstream did not. Derivatives that contained a 35-bp frameshift insertion in the repA4 ORF were all stable, even when the frameshift was located very near the 5' end of the coding region. This finding indicates that repA4 does not specify a protein product that is essential for plasmid stability. Examination of mutants having a nest of deletions with endpoints in or near repA4 indicated that the 3' end of the repA4 coding region and the site of leading-strand initiation could be deleted without appreciable effect on plasmid stability. Deletion of the pemI and pemK genes, located farther downstream from repA4 and reported to affect plasmid stability, also had no detectable effect. In contrast, mutants from which the right-hand terC repeat, or both right- and left-hand repeats, had been deleted were unstable. None of the insertion or deletion mutations in or near repA4 affected plasmid copy number. Alteration of the terC repeats by site-directed mutagenesis had little effect on plasmid stability. Plasmid stability was not affected by a fus mutation known to inactivate the termination function. Therefore, it appears that the overall integrity of the repA4 region is more important for stable maintenance of plasmid NR1 than are any of the individual known features found in this region.

Specificity of the interactions between the Rep proteins and the origins of replication of Staphylococcus aureus plasmids pT181 and pC221

pT181 and pC221 are closely related Staphylococcus aureus plasmids with the same genome organization, which is characterized by the overlapping of the origin of replication with the sequence encoding a protein, Rep, essential for plasmid replication. Former results have shown the lack of in vivo cross-complementation between these two plasmids, while in vitro studies have revealed the ability of both Rep proteins to act on either origin. One possible explanation for this difference was based on a previous analysis of the incompatibility expressed by the origin of replication of these plasmids, showing that the origin embedded in the rep gene competes for Rep utilization with the origin of a test plasmid and that changes in the sequence of the origin reduce its ability to compete. To avoid this problem, in the present work special hybrids were constructed in which the origin of replication overlapping the rep gene was mutationally inactivated, without changing the amino acid sequence of the encoded protein. The level of Rep expression by these hybrids could be varied by taking advantage of what is presently known about the control of Rep synthesis in plasmid pT181.(ABSTRACT TRUNCATED AT 250 WORDS)

Escherichia coli dnaT gene function is required for pBR322 plasmid replication but not for R1 plasmid replication

Plasmid pBR322 was unable to replicate in a temperature-sensitive dnaT1 strain at a nonpermissive temperature, whereas a pBR322-derived plasmid carrying the wild-type dnaT+ gene was able to replicate under the same conditions. In contrast to pBR322, plasmid R1 could replicate in the dnaT1 strain at a nonpermissive temperature. In keeping with this finding, in vitro replication of plasmid R1 did not require DnaT protein.

Isolation and characterization of a conditional replication mutant of the antibiotic resistance factor R1 affected in the gene of the replication protein repA

In vitro mutagenesis with hydroxylamine of a ParD- miniderivative of R1, pAB174, yielded mutants that were less stable in the cell than pAB174. Some of these mutants had a thermosensitive phenotype. The replication of pAB2623, one of the thermosensitive mutants, was inhibited in the cell at the restrictive temperature of 42 degrees C. The efficiency of the RepA protein of pAB2623 to promote replication of R1 in an in vitro assay was greatly reduced. Sequence analysis indicated that the repA gene of pAB2623 contains, close to its 3' end, two GC-AT transitions, separated by a single base, that change two consecutive codons of the gene. These results indicate that the phenotype of the mutant is the consequence of a mutated RepA protein and is consistent with the requirement of RepA for the in vivo replication of this plasmid.

Overinitiation of replication of the Escherichia coli chromosome from an integrated runaway-replication derivative of plasmid R1

A 16-base-pair fragment, deletion of which completely inactivated oriC, was replaced by a temperature-dependent runaway-replication derivative (the copy number of which increases with temperature) of the IncFII plasmid R1. The constructed strains were temperature sensitive, and flow cytometry revealed a severalfold increase in the DNA/mass ratio following shifts to nonpermissive temperatures. The cell size distribution was broader in the constructed strains relative to that in the wild type because of asynchrony between the chromosome replication and cell division cycles. This difference was more pronounced for counterclockwise initiation of chromosomal replication, in which small DNA-less cells and long filaments were abundant. Following a temperature shift the cell size distributions became even more broad, showing that changes in the frequency of chromosomal replication affect cell division and emphasizing the interplay between these two processes.

DNA bending near the replication origin of IncFII plasmid NR1

The DNA replication origin of plasmid NR1 is located approximately 190 base pairs downstream from the 3' end of the repA1 gene, which encodes the essential initiation protein for replication of the plasmid. Restriction endonuclease fragments that contain the NR1 replication origin and its flanking sequences at circularly permuted positions were obtained by digesting oligomers of ori-containing DNA fragments with sets of enzymes that each cut only once in every ori fragment. Polyacrylamide gel electrophoresis of these permuted restriction fragments showed anomalous mobilities, indicating the presence of a DNA bending locus. Through analysis of the relative mobility plots of these permuted fragments, we found one or two possible DNA bending sites located in the intervening region between the repA1 gene and the replication origin of NR1. It seems possible that DNA bending in this region might help to orient the replication origin alongside the repA1 gene, which could contribute to the cis-acting character of the RepA1 initiation protein.

Identification and sequence analysis of Escherichia coli purE and purK genes encoding 5'-phosphoribosyl-5-amino-4-imidazole carboxylase for de novo purine biosynthesis

It has been shown that the Escherichia coli purE locus specifying 5'-phosphoribosyl-5-amino-4-imidazole carboxylase in de novo purine nucleotide synthesis is divided into two cistrons. We cloned and determined a 2,449-nucleotide sequence including the purE locus. This sequence contains two overlapped open reading frames, ORF-18 and ORF-39, encoding proteins with molecular weights of 18,000 and 39,000, respectively. The purE mutations of CSH57A and DCSP22 were complemented by plasmids carrying ORF-18, while that of NK6051 was complemented by plasmids carrying ORF-39. Thus, the purE locus consists of two distinct genes, designated purE and purK for ORF-18 and ORF-39, respectively. These genes constitute a single operon. A highly conserved 16-nucleotide sequence, termed the PUR box, was found in the upstream region of purE by comparing the sequences of the purF and purMN operons. We also found three entire and one partial repetitive extragenic palindromic (REP) sequences in the downstream region of purK. Roles of the PUR box and REP sequences are discussed in relation to the genesis of the purEK operon.

Identification and classification of bacterial plasmids

Images

RepA protein- and oriR-dependent initiation of R1 plasmid replication: identification of a rho-dependent transcription terminator required for cis-action of repA protein

Initiation of R1 plasmid replication is dependent on cis-acting repA protein and the 188 base-pair (bp) sequence, oriR. RepA protein synthesized in vitro preferentially activates oriR in cis, regardless of the orientation and location of oriR on the template DNA. RepA protein is not reusable after it activates oriR in the cis-position. Cis-action of repA protein is also dependent on the presence of CIS, a 170 bp sequence, between repA and oriR. CIS contains a rho dependent transcription terminator of the repA transcript, deletion of which results in decrease in transformation efficiency and rapid loss of plasmid in the absence of selection. The significance of transcription termination events in replication was indicated by decreased replication activity in vivo caused by premature termination of the repA transcript between repA and CIS. A model which may account for the role of CIS in mediating the cis-action of the repA protein is presented.

RepA and DnaA proteins are required for initiation of R1 plasmid replication in vitro and interact with the oriR sequence

RepA, an initiation protein of R1 plasmid replication, was purified from an Escherichia coli strain overproducing the protein. The purified RepA protein specifically initiated replication in vitro of plasmid DNA bearing the replication origin of R1 plasmid (oriR). The replication, strictly dependent on added RepA protein, was independent of host RNA polymerase but required other host replication functions (DnaB and DnaC proteins, the single-stranded-DNA-binding protein SSB, and DNA gyrase). The replication was also completely dependent on the host DnaA function. In filter binding assays in high salt (0.5 M KCl) conditions, RepA specifically binds to both supercoiled and linear plasmid DNA containing the oriR sequence, whereas it binds to nonspecific DNA in low salt. DNase I-protection studies on a linearized DNA fragment revealed that DnaA protein specifically binds to a 9-base-pair DnaA-recognition sequence ("DnaA box") within oriR only when RepA is bound to the sequence immediately downstream of the DnaA box. These results indicate that initiation of R1 plasmid replication is triggered by interaction of RepA and DnaA proteins with the oriR sequence.

Nucleotide sequence analysis of RepFIC, a basic replicon present in IncFI plasmids P307 and F, and its relation to the RepA replicon of IncFII plasmids

RepFIC is a basic replicon of IncFI plasmid P307 which is located within a 3.09-kilobase SmaI fragment. The nucleotide sequence of this region has been determined and shown to be homologous with the RepFIIA replicon of IncFII plasmids. The two replicons share three homologous regions, HRI, HRII, and HRIII, which are flanked by two nonhomologous regions, NHRI and NHRII. A comparison of coding regions reveals that the two replicons have several features in common. RepFIC, like RepFIIA, codes for a repA2 protein with its amino-terminal codons in HRI and its carboxy-terminal codons in NHRI. Although the codons for the repA1 proteins are located in NHRII, the DNA region containing a putative promoter, ribosomal binding site, and initiation codons is located in HRII. This region also codes for an inc RNA. There are nine base-pair differences between the inc RNA of RepFIIA and that of RepFIC, and as a result, RepFIC and RepFIIA replicons are compatible. An EcoRI fragment from the F plasmid which shows homology with RepFIC of P307 has also been sequenced. This fragment contains only a portion of RepFIC, including the genes for the putative repA2 protein and inc RNA. The region coding for a putative repA1 protein is interrupted by the transposon Tn1000 and shows no homology with the repA1 region of RepFIIA and RepFIC of P307. Our comparative and structural analyses suggest that RepFIC and RepFIIA, although different, have a similar replication mechanism and thus can be assigned to the same replicon family, which we designate the RepFIIA family.

The Inc3B determinant of plasmid pT181. A mutational analysis

A region encompassing the origin of replication of staphylococcal plasmid pT181 has previously been shown to express an incompatibility effect denoted Inc3B, when cloned into another replicon (Novick et al. 1984). In an attempt to understand the mechanism of this incompatibility effect, and its relationship with the function of the replication origin, mutants deficient in this property were isolated and characterized. The results obtained suggest that the Inc3B effect is due to the competition for replication between the replication origin cloned in a hybrid and the origin of an autonomous plasmid. The Inc3B-deficient mutants isolated expressed different degrees of residual incompatibility. The inc3B mutations which did not express any incompatibility were found also to inactivate the function of the replication origin. All the other mutants which expressed residual Inc3B had a functional origin but presented a significantly reduced ability to use this origin when coexisting with a plasmid using a wild-type pT181 origin. It is suggested that these inc3B mutations represent a new type of origin mutation which affects the ability of the origin to compete with other origins using the same replication system, though the function per se of the origin is not significantly impaired.

The involvement of host replication proteins and of specific origin sequences in the in vitro replication of miniplasmid R1 DNA

The in vitro replication of R1 miniplasmid promoted by purified preparations of the plasmid encoded RepA protein in cell extracts of E. coli is resistant to rifampicin and can be completely inhibited by antibodies against DnaG, the primase of the cell, as well as by antibodies against proteins DnaB and SSB. R1 replication is abolished in extracts deficient in the DnaA protein. This deficiency is efficiently complemented by purified preparations of the DnaA protein. The in vitro replication of plasmid R1 is also abolished in DnaC deficient extracts and by a 10 bp deletion (nucleotides 1463-1472) within the minimal origin region. These data indicate the requirement of the DnaA, DnaB, DnaC, DnaG and SSB replication proteins of the host, as well as of specific oriR1 sequences for the RepA dependent replication of plasmid R1. The implications of these results for the initiation of R1 replication are discussed.

Host participation in plasmid maintenance: dependence upon dnaA of replicons derived from P1 and F

Nonparticipation of the bacterial dnaA gene in plasmid replication has been assumed to be the general rule. In conditional dnaA mutants of Escherichia coli, only plasmid pSC101 has been shown to have a dnaA requirement. Experiments with dnaA null mutants of E. coli, presented here, show that dnaA plays a critical and direct role in the replication of miniplasmids derived from P1 and F as it does in the initiation of bacterial replication. Evidence is also presented for the existence of a dnaA-independent secondary replicon of P1 that is able to drive bacterial chromosome replication but is inadequate to support the maintenance of P1 as a plasmid in E. coli.

Incompatibility repressor in a RepA-like replicon of the IncFI plasmid ColV2-K94

The replication region Rep1 of the IncFI plasmid ColV2-K94 was cloned on self-replicating restriction fragments. Rep1 was structurally and functionally homologous to the RepA replicon of IncFII R plasmids. Despite this close relationship, these two replication systems were compatible with each other. The nucleotide sequence of the copA incompatibility-replication control gene of Rep1 was determined and compared with the copA sequence of RepA. Six base changes were found in a 24-base-pair span of the copA gene; these may result in the formation of a new, more stable, 49-base stem-loop structure in the potential CopA RNA repressor molecule. We postulate that these alterations weaken the interaction between RNA transcripts of the Rep1 and RepA replicons.

Incompatibility mutants of IncFII plasmid NR1 and their effect on replication control

DNA from the replication control region of plasmid NR1 or of the Inc- copy mutant pRR12 was cloned into a pBR322 vector plasmid. These pBR322 derivatives were mutagenized in vitro with hydroxylamine and transformed into Escherichia coli cells that harbored either NR1 or pRR12. After selection for the newly introduced pBR322 derivatives only, those cells which retained the unselected resident NR1 or pRR12 plasmids were examined further. By this process, 134 plasmids with Inc- mutations in the cloned NR1 or pRR12 DNA were obtained. These mutants fell into 11 classes. Two of the classes had plasmids with deletions or insertions in the NR1 DNA and were not examined further. Plasmids with apparent point mutations were classified by examining (i) their ability to reconstitute a functional NR1-derived replicon (Rep+ or Rep-), (ii) the copy numbers of the Rep+ reconstituted replicons, (iii) the cross-reactivity of incompatability among the various mutant classes and parental plasmids, and (iv) the trans effects of the mutants on the copy number and stable inheritance of a coresident plasmid.

DNA-protein interactions during replication of genetic elements of bacteria

Specific interactions of DNA with proteins are required for both the replication of deoxyribonucleic acid proper and its regulation. Genetic elements of bacteria, their extrachromosomal elements in particular, represent a suitable model system for studies of these processes at the molecular level. In addition to replication enzymes (DNA polymerases), a series of other protein factors (e.g. topoisomerases, DNA unwinding enzymes, and DNA binding proteins) are involved in the replication of the chromosomal, phage and plasmid DNA. Specific interactions of proteins with DNA are particularly important in the regulation of initiation of DNA synthesis. Association of DNAs with the cell membrane also plays an important role in their replication in bacteria.

Analysis of Agrobacterium tumefaciens plasmid pTiC58 replication region with a novel high-copy-number derivative

The origin of replication, ori, of the nopaline tumor-inducing plasmid, pTiC58, mapped in a region that shares sequence homology with octopine plasmids pTiAch5 and pTiB6. Within this region, the minimum amount of DNA necessary for maintaining autonomous replication was a 2.6-kilobase region, which also comprised the incompatibility function inc. pTiC58 derivatives containing inc were incompatible with Agrobacterium tumefaciens plasmids pTiC58, pTiD1439, pTiAch5, pTi15955, and pTiA5 and were compatible with A. rhizogenes plasmid pRi12. Situated adjacent to the origin region was a 1.5-kilobase par segment involved in stable inheritance of pTiC58 under nonselective growth conditions. When par was present, plasmid maintenance approached that of the wild-type pTiC58. Rapid loss from the cell population was observed for plasmids not containing this locus. Another 1.5-kilobase region, cop, positively regulated pTiC58 copy number, enabling certain pTiC58 derivatives to exist at a copy number up to 80 times higher than that of wild-type pTiC58. Deletions within the cop locus resulted in reduced copy number. The ori/inc regions were flanked on either side by the par and cop loci.

Analysis of the individual regulatory components of the IncFII plasmid replication control system

Replication of the IncFII plasmid NR1 is controlled by regulating the amount of synthesis of the repA1 initiator protein at both the transcriptional and translational levels. We have examined mutations which have altered each of these levels of regulation, resulting in different plasmid copy numbers. The genes which encode each of the individual wild-type or mutant regulatory components from the replication control region of NR1 have been cloned independently into pBR322 vectors, and their effects in trans, either individually or in various combinations, on plasmid incompatibility, stability, copy number, and repA1 gene expression have been defined.

Regulation of transcription of the repA1 gene in the replication control region of IncFII plasmid NR1 by gene dosage of the repA2 transcription repressor protein

Transcription of the repA1 gene of the IncFII plasmid NR1 is initiated at two promoters in the replication control region. Transcription from the upstream promoter is constitutive at a low level, whereas transcription from the downstream promoter is regulated. The 5' end of the constitutively synthesized transcript also encodes the transcription repressor protein for the regulated downstream promoter. Therefore, the level of the repressor protein in the cell is gene dosage dependent. Using both lac gene fusions and quantitative hybridization methods, we have determined the in vivo relationship between the rate of transcription from the regulated promoter and the repressor protein concentration as a function of gene dosage. At the wild-type copy number of NR1, transcription from the regulated promoter is 96% repressed, but substantial derepression occurs when the copy number falls below the normal value. At or above the normal plasmid copy number, the basal level of repA1 mRNA is provided by transcription from the constitutive upstream promoter.

IncFII plasmid incompatibility product and its target are both RNA transcripts

The region of DNA coding for incompatibility (inc) and copy number control (cop) of the IncFII plasmid NR1 is transcribed in both the rightward and leftward directions. The rightward transcripts serve as mRNA for the repA1 protein, which is required for replication. A small, 91-base leftward transcript is synthesized from the opposite DNA strand and is complementary to a portion of the rightward mRNA near its 5' end. A 262-base-pair Sau3A restriction fragment that encodes the small leftward transcript, but does not include the rightward transcription promoters, was cloned into the vector pBR322 or pUC8. The same fragment was cloned from an Inc- mutant of NR1 that does not make the small leftward transcript. Transcription through the cloned fragments in these derivatives was under control of the tetracycline resistance gene in pBR322 or the lac promoter-operator in pUC8. In one orientation of the inserted DNA, a hybrid transcript containing rightward NR1 RNA sequences was synthesized. In the other orientation, a hybrid transcript containing leftward NR1 RNA sequences was synthesized. These plasmids were used to vary the intracellular levels of the rightward or leftward NR1 RNA transcripts and to test their effects in trans on various coresident derivatives of NR1. An excess of rightward NR1 RNA in trans stimulated expression of the essential repA1 gene and caused an increase in the copy number of a coresident NR1 plasmid. An excess of leftward NR1 RNA in trans inhibited the expression of the repA1 gene and lowered the coresident NR1 copy number, thereby causing incompatibility. A pBR322 derivative with no transcription through the cloned NR1 DNA had no effect in trans. These results suggest that the small leftward transcript is the incompatibility inhibitor of NR1 and that its target is the complementary portion of the rightward mRNA.

Initiation of plasmid R1 replication in vitro is independent of transcription by host RNA polymerase

A Sau3A fragment containing most of the repA gene of plasmid R1 has been cloned in the BamH1 site of the expression vector pAS1. One of the recombinants, pSO1, codes for a fused RepA' protein which is efficiently synthesized both in vivo and in vitro from transcriptional and translational signals of the vector. It is shown that following pSO1 promoted accumulation of RepA' in cell-free extracts of E. coli, in vitro replication of the R1 miniplasmid pKN182 can initiate and proceed uncoupled from further protein synthesis. Using this uncoupled system and also a M13mp9 based ori-R1 recombinant, pRD95, it is also shown that RepA' acts at the origin region of R1 to promote initiation of replication that is independent on transcription by host RNA polymerase. This is indicated by the insensitivity of pRD95 and pKN182 replication to rifampicin as well as to RNA polymerase antibodies. The properties of the uncoupled in vitro replication system are further described.