Host participation in plasmid maintenance: dependence upon dnaA of replicons derived from P1 and F

The linker domain of the initiator DnaA contributes to its ATP binding and membrane association in E. coli chromosomal replication

DnaA, the initiator of Escherichia coli chromosomal replication, has in its adenosine triphosphatase (ATPase) domain residues required for adenosine 5'-triphosphate (ATP) binding and membrane attachment. Here, we show that D118Q substitution in the DnaA linker domain, a domain known to be without major regulatory functions, influences ATP binding of DnaA and replication initiation in vivo. Although initiation defective by itself, overexpression of DnaA(D118Q) caused overinitiation of replication in dnaA46ts cells and prevented cell growth. The growth defect was rescued by overexpressing the initiation inhibitor, SeqA, indicating that the growth inhibition resulted from overinitiation. Small deletions within the linker showed another unexpected phenotype: cellular growth without requiring normal levels of anionic membrane lipids, a property found in DnaA mutated in its ATPase domain. The deleted proteins were defective in association with anionic membrane vesicles. These results show that changes in the linker domain can alter DnaA functions similarly to the previously shown changes in the ATPase domain.

A nucleotide-dependent oligomerization of the Escherichia coli replication initiator DnaA requires residue His136 for remodeling of the chromosomal origin

Escherichia coli replication initiator protein DnaA binds ATP with high affinity but the amount of ATP required to initiate replication greatly exceeds the amount required for binding. Previously, we showed that ATP-DnaA, not ADP-DnaA, undergoes a conformational change at the higher nucleotide concentration, which allows DnaA oligomerization at the replication origin but the association state remains unclear. Here, we used Small Angle X-ray Scattering (SAXS) to investigate oligomerization of DnaA in solution. Whereas ADP-DnaA was predominantly monomeric, AMP–PNP–DnaA (a non-hydrolysable ATP-analog bound-DnaA) was oligomeric, primarily dimeric. Functional studies using DnaA mutants revealed that DnaA(H136Q) is defective in initiating replication in vivo. The mutant retains high-affinity ATP binding, but was defective in producing replication-competent initiation complexes. Docking of ATP on a structure of E. coli DnaA, modeled upon the crystallographic structure of Aquifex aeolicus DnaA, predicts a hydrogen bond between ATP and imidazole ring of His136, which is disrupted when Gln is present at position 136. SAXS performed on AMP–PNP–DnaA (H136Q) indicates that the protein has lost its ability to form oligomers. These results show the importance of high ATP in DnaA oligomerization and its dependence on the His136 residue.

Mutations of DnaA-boxes in the oriR region increase replication frequency of the MiniR1-1 plasmid

BACKGROUND

The MiniR1-1 plasmid is a derivative of the R1 plasmid, a low copy cloning vector.

RESULTS

Nucleotide sequencing analysis shows that the MiniR1-1 plasmid is a 6316 bp circular double-stranded DNA molecule with an oriR1 (origin for replication). The plasmid carries the repA, tap, copA and bla genes, and genes for ORF1 and ORF2. MiniR1-1 contains eight DnaA-binding sites (DnaA-boxes). DnaA-box1 is in the oriR1 region and fully matched to the DnaA-box consensus sequence, and DnaA-box8, with one mismatch, is close to the copA gene. The presence of the MiniR1-1 plasmid leads to an accumulation of the D-period cells and an increase in cell size of slowly growing Escherichia coli cells, suggesting that the presence of MiniR1-1 delays cell division. Mutations in the MiniR1-1 DnaA-box1 and DnaA-box8 significantly increase the copy number of the plasmid and the mutations in DnaA-box1 also affect cell size. It is likely that titration of DnaA to DnaA-boxes negatively controls replication of the MiniR1-1 plasmid and delays cell division. Interestingly, DnaA weakly interacts with the initiator protein RepA in vivo.

CONCLUSION

DnaA regulates the copy number of MiniR1-1 as a negative factor through interacting with the RepA protein.

Establishing a System for Testing Replication Inhibition of the Vibrio cholerae Secondary Chromosome in Escherichia coli

Regulators of DNA replication in bacteria are an attractive target for new antibiotics, as not only is replication essential for cell viability, but its underlying mechanisms also differ from those operating in eukaryotes. The genetic information of most bacteria is encoded on a single chromosome, but about 10% of species carry a split genome spanning multiple chromosomes. The best studied bacterium in this context is the human pathogen Vibrio cholerae, with a primary chromosome (Chr1) of 3 M bps, and a secondary one (Chr2) of about 1 M bps. Replication of Chr2 is under control of a unique mechanism, presenting a potential target in the development of V. cholerae-specific antibiotics. A common challenge in such endeavors is whether the effects of candidate chemicals can be focused on specific mechanisms, such as DNA replication. To test the specificity of antimicrobial substances independent of other features of the V. cholerae cell for the replication mechanism of the V. cholerae secondary chromosome, we establish the replication machinery in the heterologous E. coli system. We characterize an E. coli strain in which chromosomal replication is driven by the replication origin of V. cholerae Chr2. Surprisingly, the E. coli ori2 strain was not inhibited by vibrepin, previously found to inhibit ori2-based replication.

Random versus Cell Cycle-Regulated Replication Initiation in Bacteria: Insights from Studying Vibrio cholerae Chromosome 2

Bacterial chromosomes initiate replication at a fixed time in the cell cycle, whereas there is generally no particular time for plasmid replication initiation or chromosomal replication initiation from integrated plasmids. In bacteria with divided genomes, the replication system of one of the chromosomes typically resembles that of bacteria with undivided genomes, whereas the remaining chromosomes have plasmid-like replication systems. For example, in Vibrio cholerae, a bacterium with two chromosomes (chromosome 1 [Chr1] and Chr2), the Chr1 system resembles that of the Escherichia coli chromosome, and the Chr2 system resembles that of iteron-based plasmids. However, Chr2 still initiates replication at a fixed time in the cell cycle and thus offers an opportunity to understand the molecular basis for the difference between random and cell cycle-regulated modes of replication. Here we review studies of replication control in Chr2 and compare it to those of plasmids and chromosomes. We argue that although the Chr2 control mechanisms in many ways are reminiscent of those of plasmids, they also appear to combine more regulatory features than are found on a typical plasmid, including some that are more typical of chromosomes. One of the regulatory mechanisms is especially novel, the coordinated timing of replication initiation of Chr1 and Chr2, providing the first example of communication between chromosomes for replication initiation.

The bacterial DnaA-trio replication origin element specifies single-stranded DNA initiator binding

DNA replication is tightly controlled to ensure accurate inheritance of genetic information. In all organisms, initiator proteins possessing AAA+ (ATPases associated with various cellular activities) domains bind replication origins to license new rounds of DNA synthesis. In bacteria the master initiator protein, DnaA, is highly conserved and has two crucial DNA binding activities. DnaA monomers recognize the replication origin (oriC) by binding double-stranded DNA sequences (DnaA-boxes); subsequently, DnaA filaments assemble and promote duplex unwinding by engaging and stretching a single DNA strand. While the specificity for duplex DnaA-boxes by DnaA has been appreciated for over 30 years, the sequence specificity for single-strand DNA binding has remained unknown. Here we identify a new indispensable bacterial replication origin element composed of a repeating trinucleotide motif that we term the DnaA-trio. We show that the function of the DnaA-trio is to stabilize DnaA filaments on a single DNA strand, thus providing essential precision to this binding mechanism. Bioinformatic analysis detects DnaA-trios in replication origins throughout the bacterial kingdom, indicating that this element is part of the core oriC structure. The discovery and characterization of the novel DnaA-trio extends our fundamental understanding of bacterial DNA replication initiation, and because of the conserved structure of AAA+ initiator proteins these findings raise the possibility of specific recognition motifs within replication origins of higher organisms.

The orisome: structure and function

During the cell division cycle of all bacteria, DNA-protein complexes termed orisomes trigger the onset of chromosome duplication. Orisome assembly is both staged and stringently regulated to ensure that DNA synthesis begins at a precise time and only once at each origin per cycle. Orisomes comprise multiple copies of the initiator protein DnaA, which oligomerizes after interacting with specifically positioned recognition sites in the unique chromosomal replication origin, oriC. Since DnaA is highly conserved, it is logical to expect that all bacterial orisomes will share fundamental attributes. Indeed, although mechanistic details remain to be determined, all bacterial orisomes are capable of unwinding oriC DNA and assisting with loading of DNA helicase onto the single-strands. However, comparative analysis of oriCs reveals that the arrangement and number of DnaA recognition sites is surprisingly variable among bacterial types, suggesting there are many paths to produce functional orisome complexes. Fundamental questions exist about why these different paths exist and which features of orisomes must be shared among diverse bacterial types. In this review we present the current understanding of orisome assembly and function in Escherichia coli and compare the replication origins among the related members of the Gammaproteobacteria. From this information we propose that the diversity in orisome assembly reflects both the requirement to regulate the conformation of origin DNA as well as to provide an appropriate cell cycle timing mechanism that reflects the lifestyle of the bacteria. We suggest that identification of shared steps in orisome assembly may reveal particularly good targets for new antibiotics.

Sequence-specific interactions of Rep proteins with ssDNA in the AT-rich region of the plasmid replication origin

The DNA unwinding element (DUE) is a sequence rich in adenine and thymine residues present within the origin region of both prokaryotic and eukaryotic replicons. Recently, it has been shown that this is the site where bacterial DnaA proteins, the chromosomal replication initiators, form a specific nucleoprotein filament. DnaA proteins contain a DNA binding domain (DBD) and belong to the family of origin binding proteins (OBPs). To date there has been no data on whether OBPs structurally different from DnaA can form nucleoprotein complexes within the DUE. In this work we demonstrate that plasmid Rep proteins, composed of two Winged Helix domains, distinct from the DBD, specifically bind to one of the strands of ssDNA within the DUE. We observed nucleoprotein complexes formed by these Rep proteins, involving both dsDNA containing the Rep-binding sites (iterons) and the strand-specific ssDNA of the DUE. Formation of these complexes required the presence of all repeated sequence elements located within the DUE. Any changes in these repeated sequences resulted in the disturbance in Rep-ssDNA DUE complex formation and the lack of origin replication activity in vivo or in vitro.

Building the bacterial orisome: high-affinity DnaA recognition plays a role in setting the conformation of oriC DNA

During assembly of the E. coli pre-replicative complex (pre-RC), initiator DnaA oligomers are nucleated from three widely separated high-affinity DnaA recognition sites in oriC. Oligomer assembly is then guided by low-affinity DnaA recognition sites, but is also regulated by a switch-like conformational change in oriC mediated by sequential binding of two DNA bending proteins, Fis and IHF, serving as inhibitor and activator respectively. Although their recognition sites are separated by up to 90 bp, Fis represses IHF binding and weak DnaA interactions until accumulating DnaA displaces Fis from oriC. It remains unclear whether high-affinity DnaA binding plays any role in Fis repression at a distance and it is also not known whether all high-affinity DnaA recognition sites play an equivalent role in oligomer formation. To examine these issues, we developed origin-selective recombineering methods to mutate E. coli chromosomal oriC. We found that, although oligomers were assembled in the absence of any individual high-affinity DnaA binding site, loss of DnaA binding at peripheral sites eliminated Fis repression, and made binding of both Fis and IHF essential. We propose a model in which interaction of DnaA molecules at high-affinity sites regulates oriC DNA conformation.

High-copy bacterial plasmids diffuse in the nucleoid-free space, replicate stochastically and are randomly partitioned at cell division

Bacterial plasmids play important roles in the metabolism, pathogenesis and bacterial evolution and are highly versatile biotechnological tools. Stable inheritance of plasmids depends on their autonomous replication and efficient partition to daughter cells at cell division. Active partition systems have not been identified for high-copy number plasmids, and it has been generally believed that they are partitioned randomly at cell division. Nevertheless, direct evidence for the cellular location of replicating and nonreplicating plasmids, and the partition mechanism has been lacking. We used as model pJHCMW1, a plasmid isolated from Klebsiella pneumoniae that includes two β-lactamase and two aminoglycoside resistance genes. Here we report that individual ColE1-type plasmid molecules are mobile and tend to be excluded from the nucleoid, mainly localizing at the cell poles but occasionally moving between poles along the long axis of the cell. As a consequence, at the moment of cell division, most plasmid molecules are located at the poles, resulting in efficient random partition to the daughter cells. Complete replication of individual molecules occurred stochastically and independently in the nucleoid-free space throughout the cell cycle, with a constant probability of initiation per plasmid.

A Monte Carlo simulation of plasmid replication during the bacterial division cycle

Plasmids have cell cycle replication patterns that need to be considered in models of their replication dynamics. To compare current theories for control of plasmid replication with experimental data for timing of plasmid replication with the cell cycle, a Monte Carlo simulation of plasmid replication and partition was developed. High-copy plasmid replication was simulated by incorporating equations previously developed from the known molecular biology of ColE1-type plasmids into the cell-cycle simulation. Two types of molecular mechanisms for low-copy plasmid replication were tested: accumulation of an initiator protein in proportion to cell mass and binding of the plasmid origin to the cell membrane. The low-copy plasmids were partitioned actively, with a specific mechanism to mediate the transfer from mother to daughter cells, whereas the high-copy plasmids were partitioned passively with cell mass.The simulation results and experimental data demonstrate cell-cycle-specific replication for the low-copy F plasmid and cell-cycle-independent replication for the high-copy pBR322, ColBM, and R6K plasmids. The simulation results indicate that synchronous replication at multiple plasmid origins is critical for the cell-cycle-specific pattern observed in rapidly growing cells. Variability in the synchrony of initiation of multiple plasmid origins give rise to a cell-cycle-independent pattern and is offered as a plausible explanation for the controversy surrounding the replication pattern of the low-copy plasmids. A comparison of experimental data and simulation results for the low-copy F plasmid at several growth rates indicates that either initiation mechanism would be sufficient to explain the timing of replication with the cell cycle. The simulation results also demonstrate that, although cell-cycle-specific and cell-cycle independent replication patterns give rise to very different gene-expression patterns during short induction periods in age-selected populations, long-term expression of genes encoded on low-copy and high-copy plasmids in exponentially growing cells have nearly the same patterns. These results may be important for the future use of low-copy plasmids as expression vectors and validate the use of simpler models for high-copy plasmids that do not consider cell-cycle phenomena. (c) 1996 John Wiley & Sons, Inc.

Two replication regions in the pJM1 virulence plasmid of the marine pathogen Vibrio anguillarum

Vibrio anguillarum is a fish pathogen that causes vibriosis, a serious hemorrhagic septicemia, in wild and cultured fish. Many serotype O1 strains of this bacterium harbor the 65kb plasmid pJM1 carrying the majority of genes encoding the siderophore anguibactin iron transport system that is one of the most important virulence factors of this bacterium. We previously identified a replication region of the pJM1 plasmid named ori1. In this work we determined that ori1 can replicate in Escherichia coli and that the chromosome-encoded proteins DnaB, DnaC and DnaG are essential for its replication whereas PolI, IHF and DnaA are not required. The copy number of the pJM1 plasmid is 1-2, albeit cloned smaller fragments of the ori1 region replicate with higher copy numbers in V. anguillarum while in E. coli we did not observe an obvious difference of the copy numbers of these constructs which were all high. Furthermore, we were able to delete the ori1 region from the pJM1 plasmid and identified a second replication region in pJM1 that we named ori2. This second replication region is located on ORF25 that is within the trans-acting factor (TAFr) region, and showed that it can only replicate in V. anguillarum.

AT-rich region and repeated sequences - the essential elements of replication origins of bacterial replicons

Repeated sequences are commonly present in the sites for DNA replication initiation in bacterial, archaeal, and eukaryotic replicons. Those motifs are usually the binding places for replication initiation proteins or replication regulatory factors. In prokaryotic replication origins, the most abundant repeated sequences are DnaA boxes which are the binding sites for chromosomal replication initiation protein DnaA, iterons which bind plasmid or phage DNA replication initiators, defined motifs for site-specific DNA methylation, and 13-nucleotide-long motifs of a not too well-characterized function, which are present within a specific region of replication origin containing higher than average content of adenine and thymine residues. In this review, we specify methods allowing identification of a replication origin, basing on the localization of an AT-rich region and the arrangement of the origin's structural elements. We describe the regularity of the position and structure of the AT-rich regions in bacterial chromosomes and plasmids. The importance of 13-nucleotide-long repeats present at the AT-rich region, as well as other motifs overlapping them, was pointed out to be essential for DNA replication initiation including origin opening, helicase loading and replication complex assembly. We also summarize the role of AT-rich region repeated sequences for DNA replication regulation.

Remodeling of nucleoprotein complexes is independent of the nucleotide state of a mutant AAA+ protein

DnaA protein, a member of the AAA+ (ATPase associated with various cellular activities) family, initiates DNA synthesis at the chromosomal origin of replication (oriC) and regulates the transcription of several genes, including its own. The assembly of DnaA complexes at chromosomal recognition sequences is affected by the tight binding of ATP or ADP by DnaA. DnaA with a point mutation in its membrane-binding amphipathic helix, DnaA(L366K), previously described for its ability to support growth in cells with altered phospholipid content, has biochemical characteristics similar to those of the wild-type protein. Yet DnaA(L366K) fails to initiate in vitro or in vivo replication from oriC. We found here, through in vitro dimethyl sulfate footprinting and gel mobility shift assays, that DnaA(L366K) in either nucleotide state was unable to assemble into productive prereplication complexes. In contrast, at the dnaA promoter, both the ATP and the ADP form of DnaA(L366K) generated active nucleoprotein complexes that efficiently repressed transcription in a manner similar to wild-type ATP-DnaA. Thus, it appears that unlike wild-type DnaA protein DnaA(L366K) can adopt architectures that are independent of its bound nucleotide, and instead the locus determines the functionality of the higher order DnaA(L366K)-DNA complexes.

The replication origin of a repABC plasmid

Background

repABC operons are present on large, low copy-number plasmids and on some secondary chromosomes in at least 19 α-proteobacterial genera, and are responsible for the replication and segregation properties of these replicons. These operons consist, with some variations, of three genes: repA, repB, and repC. RepA and RepB are involved in plasmid partitioning and in the negative regulation of their own transcription, and RepC is the limiting factor for replication. An antisense RNA encoded between the repB-repC genes modulates repC expression.

Results

To identify the minimal region of the Rhizobium etli p42d plasmid that is capable of autonomous replication, we amplified different regions of the repABC operon using PCR and cloned the regions into a suicide vector. The resulting vectors were then introduced into R. etli strains that did or did not contain p42d. The minimal replicon consisted of a repC open reading frame under the control of a constitutive promoter with a Shine-Dalgarno sequence that we designed. A sequence analysis of repC revealed the presence of a large A+T-rich region but no iterons or DnaA boxes. Silent mutations that modified the A+T content of this region eliminated the replication capability of the plasmid. The minimal replicon could not be introduced into R. etli strain containing p42d, but similar constructs that carried repC from Sinorhizobium meliloti pSymA or the linear chromosome of Agrobacterium tumefaciens replicated in the presence or absence of p42d, indicating that RepC is an incompatibility factor. A hybrid gene construct expressing a RepC protein with the first 362 amino acid residues from p42d RepC and the last 39 amino acid residues of RepC from SymA was able to replicate in the presence of p42d.

Conclusions

RepC is the only element encoded in the repABC operon of the R. etli p42d plasmid that is necessary and sufficient for plasmid replication and is probably the initiator protein. The oriV of this plasmid resides within the repC gene and is located close to or inside of a large A+T region. RepC can act as an incompatibility factor, and the last 39 amino acid residues of the carboxy-terminal region of this protein are involved in promoting this phenotype.

Replication of Vibrio cholerae chromosome I in Escherichia coli: dependence on dam methylation

We successfully substituted Escherichia coli's origin of replication oriC with the origin region of Vibrio cholerae chromosome I (oriCI(Vc)). Replication from oriCI(Vc) initiated at a similar or slightly reduced cell mass compared to that of normal E. coli oriC. With respect to sequestration-dependent synchrony of initiation and stimulation of initiation by the loss of Hda activity, replication initiation from oriC and oriCI(Vc) were similar. Since Hda is involved in the conversion of DnaA(ATP) (DnaA bound to ATP) to DnaA(ADP) (DnaA bound to ADP), this indicates that DnaA associated with ATP is limiting for V. cholerae chromosome I replication, which similar to what is observed for E. coli. No hda homologue has been identified in V. cholerae yet. In V. cholerae, dam is essential for viability, whereas in E. coli, dam mutants are viable. Replacement of E. coli oriC with oriCI(Vc) allowed us to specifically address the role of the Dam methyltransferase and SeqA in replication initiation from oriCI(Vc). We show that when E. coli's origin of replication is substituted by oriCI(Vc), dam, but not seqA, becomes important for growth, arguing that Dam methylation exerts a critical function at the origin of replication itself. We propose that Dam methylation promotes DnaA-assisted successful duplex opening and replisome assembly at oriCI(Vc) in E. coli. In this model, methylation at oriCI(Vc) would ease DNA melting. This is supported by the fact that the requirement for dam can be alleviated by increasing negative supercoiling of the chromosome through oversupply of the DNA gyrase or loss of SeqA activity.

IHF-dependent activation of P1 plasmid origin by dnaA

In bacteria, many DNA-protein interactions that initiate transcription, replication and recombination require the mediation of DNA architectural proteins such as IHF and HU. For replication initiation, plasmid P1 requires three origin binding proteins: the architectural protein HU, a plasmid-specific initiator, RepA, and the Escherichia coli chromosomal initiator, DnaA. The two initiators bind in the origin of replication to multiple sites, called iterons and DnaA boxes respectively. We show here that all five known DnaA boxes can be deleted from the plasmid origin provided the origin is extended by about 120 bp. The additional DNA provides an IHF site and most likely a weak DnaA binding site, because replacing the putative site with an authentic DnaA box enhanced plasmid replication in an IHF-dependent manner. IHF most likely brings about interactions between distally bound DnaA and RepA by bending the intervening DNA. The role of IHF in activating P1 origin by allowing DnaA binding to a weak site is reminiscent of the role the protein plays in initiating the host chromosomal replication.

The two chromosomes of Vibrio cholerae are initiated at different time points in the cell cycle

The bacterium Vibrio cholerae, the cause of the diarrhoeal disease cholera, has its genome divided between two chromosomes, a feature uncommon for bacteria. The two chromosomes are of different sizes and different initiator molecules control their replication independently. Using novel methods for analysing flow cytometry data and marker frequency analysis, we show that the small chromosome II is replicated late in the C period of the cell cycle, where most of chromosome I has been replicated. Owing to the delay in initiation of chromosome II, the two chromosomes terminate replication at approximately the same time and the average number of replication origins per cell is higher for chromosome I than for chromosome II. Analysis of cell-cycle parameters shows that chromosome replication and segregation is exceptionally fast in V. cholerae. The divided genome and delayed replication of chromosome II may reduce the metabolic burden and complexity of chromosome replication by postponing DNA synthesis to the last part of the cell cycle and reducing the need for overlapping replication cycles during rapid proliferation.

Interaction of initiator proteins with the origin of replication of an IncL/M plasmid

The origin of replication of the IncL/M plasmid pMU604 was analyzed to identify sequences important for binding of initiator proteins and origin activity. A thrice repeated sequence motif 5'-NANCYGCAA-3' was identified as the binding site (RepA box) of the initiator protein, RepA. All three copies of the RepA box were required for in vivo activity and binding of RepA to these boxes appeared to be cooperative. A DnaA R box (box 1), located immediately upstream of the RepA boxes, was not required for recruitment of DnaA during initiation of replication by RepA of pMU604 unless a DnaA R box located at the distal end of the origin (box 3) had been inactivated. However, DnaA R box 1 was important for recruitment of DnaA to the origin of replication of pMU604 when the initiator RepA was that from a distantly related plasmid, pMU720. A mutation which scrambled DnaA R boxes 1 and 3 and one which scrambled DnaA R boxes 1, 3 and 4 had much more deleterious effects on initiation by RepA of pMU720 than on initiation by RepA of pMU604. Neither Rep protein could initiate replication from the origin of pMU604 in the absence of DnaA, suggesting that the difference between them might lie in the mechanism of recruitment of DnaA to this origin. DnaA protein enhanced the binding and origin unwinding activities of RepA of pMU604, but appeared unable to bind to a linear DNA fragment bearing the origin of replication of pMU604 in the absence of other proteins.

Autorepression of RctB, an initiator of Vibrio cholerae chromosome II replication

The RctB protein binds to the origin of replication of Vibrio cholerae chromosome II (chrII) and is required for oriCIIVc-based replication. Here, we found that RctB acts as an autorepressor, inhibiting rctB transcription. Integration host factor promotes rctB transcription, while Dam and DnaA, factors required for replication of both V. cholerae chromosomes, influence RctB autorepression. Thus, RctB appears to regulate chrII replication as both an initiator and a transcription repressor, and its synthesis is modulated by factors that govern replication of both chromosomes.

Genome of bacteriophage P1

P1 is a bacteriophage of Escherichia coli and other enteric bacteria. It lysogenizes its hosts as a circular, low-copy-number plasmid. We have determined the complete nucleotide sequences of two strains of a P1 thermoinducible mutant, P1 c1-100. The P1 genome (93,601 bp) contains at least 117 genes, of which almost two-thirds had not been sequenced previously and 49 have no homologs in other organisms. Protein-coding genes occupy 92% of the genome and are organized in 45 operons, of which four are decisive for the choice between lysis and lysogeny. Four others ensure plasmid maintenance. The majority of the remaining 37 operons are involved in lytic development. Seventeen operons are transcribed from sigma(70) promoters directly controlled by the master phage repressor C1. Late operons are transcribed from promoters recognized by the E. coli RNA polymerase holoenzyme in the presence of the Lpa protein, the product of a C1-controlled P1 gene. Three species of P1-encoded tRNAs provide differential controls of translation, and a P1-encoded DNA methyltransferase with putative bifunctionality influences transcription, replication, and DNA packaging. The genome is particularly rich in Chi recombinogenic sites. The base content and distribution in P1 DNA indicate that replication of P1 from its plasmid origin had more impact on the base compositional asymmetries of the P1 genome than replication from the lytic origin of replication.

Role of RepA and DnaA proteins in the opening of the origin of DNA replication of an IncB plasmid

The replication initiator protein RepA of the IncB plasmid pMU720 was shown to induce localized unwinding of its cognate origin of replication in vitro. DnaA, the initiator protein of Escherichia coli, was unable to induce localized unwinding of this origin of replication on its own but enhanced the opening generated by RepA. The opened region lies immediately downstream of the last of the three binding sites for RepA (RepA boxes) and covers one turn of DNA helix. A 6-mer sequence, 5'-TCTTAA-3', which lies within the opened region, was essential for the localized unwinding of the origin in vitro and origin activity in vivo. In addition, efficient unwinding of the origin of replication of pMU720 in vitro required the native positioning of the binding sites for the initiator proteins. Interestingly, binding of RepA to RepA box 1, which is essential for origin activity, was not required for the localized opening of the origin in vitro.

Distinct replication requirements for the two Vibrio cholerae chromosomes

Studies of prokaryotic chromosome replication have focused almost exclusively on organisms with one chromosome. We defined and characterized the origins of replication of the two Vibrio cholerae chromosomes, oriCI(vc) and oriCII(vc). OriCII(vc) differs from the origin assigned by bioinformatic analysis and is unrelated to oriCI(vc). OriCII(vc)-based replication requires an internal 12 base pair repeat and two hypothetical genes that flank oriCII(vc). One of these genes is conserved among diverse genera of the family Vibrionaceae and encodes an origin binding protein. The other gene codes for an RNA and not a protein. OriCII(vc)- but not oriCI(vc)-based replication is negatively regulated by a DNA sequence adjacent to oriCII(vc). There is an unprecedented requirement for DNA adenine methyltransferase in both oriCI(vc)- and oriCII(vc)-based replication. Our studies of replication in V. cholerae indicate that microorganisms having multiple chromosomes may utilize unique mechanisms for the control of replication.

The bacterial replication initiator DnaA. DnaA and oriC, the bacterial mode to initiate DNA replication

The initiation of replication is the central event in the bacterial cell cycle. Cells control the rate of DNA synthesis by modulating the frequency with which new chains are initiated, like all macromolecular synthesis. The end of the replication cycle provides a checkpoint that must be executed for cell division to occur. This review summarizes recent insight into the biochemistry, genetics and control of the initiation of replication in bacteria, and the central role of the initiator protein DnaA.

Regulation of chromosomal replication by DnaA protein availability in Escherichia coli: effects of the datA region

Initiation of chromosomal replication in Escherichia coli is dependent on availability of the initiator protein DnaA. We have introduced into E. coli cells plasmids carrying the chromosomal locus datA, which has a high affinity for DnaA. To be able to monitor oriC initiation as a function of datA copy number, we introduced a minichromosome which only replicates from oriC, using a host cell which replicates its chromosome independently of oriC. Our data show that a moderate increase in datA copy number is accompanied by increased DnaA protein synthesis that allows oriC initiation to occur normally, as measured by minichromosome copy number. As datA gene dosage is increased dnaA expression cannot be further derepressed, and the minichromosome copy number is dramatically reduced. Under these conditions the minichromosome was maintained by integration into the chromosome. These findings suggest that the datA locus plays a significant role in regulating oriC initiation, by its capacity to bind DnaA. They also suggest that auto regulation of the dnaA gene is of minor importance in regulation of chromosome initiation.

Mechanistic aspects of DnaA-RepA interaction as revealed by yeast forward and reverse two-hybrid analysis

Using yeast forward and reverse two-hybrid analysis and biochemical techniques, we present novel and definitive in vivo and in vitro evidence that both the N-terminal domain I and C-terminal domain IV of the host-encoded DnaA initiator protein of Escherichia coli interact physically with plasmid-encoded RepA initiator of pSC101. The N-terminal, but not the C-terminal, region of RepA interacted with DnaA in vitro. These protein-protein interactions are critical for two very early steps of replication initiation, namely origin unwinding and helicase loading. Neither domain I nor IV of DnaA could individually collaborate with RepA to promote pSC101 replication. However, when the two domains are co-expressed within a common cell milieu and allowed to associate non-covalently with each other via a pair of leucine zippers, replication of the plasmid was supported in vivo. Thus, the result shows that physical tethering, either non-covalent or covalent, of domain I and IV of DnaA and interaction of both domains with RepA, are critical for replication initiation. The results also provide the molecular basis for a novel, potential, replication-based bacterial two-hybrid system.

DnaA boxes in the P1 plasmid origin: the effect of their position on the directionality of replication and plasmid copy number

The DnaA protein is essential for initiation of DNA replication in a wide variety of bacterial and plasmid replicons. The replication origin in these replicons invariably contains specific binding sites for the protein, called DnaA boxes. Plasmid P1 contains a set of DnaA boxes at each end of its origin but can function with either one of the sets. Here we report that the location of origin-opening, initiation site of replication forks and directionality of replication do not change whether the boxes are present at both or at one of the ends of the origin. Replication was bidirectional in all cases. These results imply that DnaA functions similarly from the two ends of the origin. However, origins with DnaA boxes proximal to the origin-opening location opened more efficiently and maintained plasmids at higher copy numbers. Origins with the distal set were inactive unless the adjacent P1 DNA sequences beyond the boxes were included. At either end, phasing of the boxes with respect to the remainder of the origin influenced the copy number. Thus, although the boxes can be at either end, their precise context is critical for efficient origin function.

The interaction domains of the DnaA and DnaB replication proteins of Escherichia coli

The initiation of chromosome replication in Escherichia coli requires the recruitment of the replicative helicase DnaB from the DnaBC complex to the unwound region within the replication origin oriC, supported by the oriC-bound initiator protein DnaA. We defined physical contacts between DnaA and DnaB that involve residues 24-86 and 130-148 of DnaA and residues 154-210 and 1-156 of DnaB respectively. We propose that contacts between DnaA and DnaB occur via two interaction sites on each of the proteins. Interaction domain 24-86 of DnaA overlaps with its N-terminal homo-oligomerization domain (residues 1-86). Interaction domain 154-210 of DnaB overlaps or is contiguous with the domains known to interact with plasmid initiator proteins. Loading of the DnaBC helicase in vivo can only be performed by DnaA derivatives containing (in addition to residues 24-86 and the DNA-binding domain 4) a structurally intact domain 3. Nucleotide binding by domain 3 is, however, not required. The parts of DnaA required for replication of pSC101 were clearly different from those used for helicase loading. Domains 1 and 4 of DnaA, but not domain 3, were found to be involved in the maintenance of plasmid pSC101.

FtsZ ring formation without subsequent cell division after replication runout in Escherichia coli

In this report, we have investigated cell division after inhibition of initiation of chromosome replication in Escherichia coli. In a culture grown to the stationary phase, cells containing more than one chromosome were able to divide some time after restart of growth, under conditions not allowing initiation of chromosome replication. This shows that there is no requirement for cell division to take place within a certain time after initiation of chromosome replication. Continued growth without initiation of replication resulted in filamented cells that generally did not have any constrictions. Interestingly, FtsZ rings were formed in a majority of these cells as they reached a certain cell length. These rings appeared and were maintained for some time at the cell quarter positions on both sides of the centrally localized nucleoid. These results confirm previous findings that cell division sites are formed independently of chromosome replication and indicate that FtsZ ring assembly is dependent on cell size rather than on the capacity of the cell to divide. Disruption of the mukB gene caused a significant increase in the region occupied by DNA after the replication runout, consistent with a role of MukB in chromosome condensation. The aberrant nucleoid structure was accompanied by a shift in FtsZ ring positioning, indicating an effect of the nucleoid on the positioning of the FtsZ ring. A narrow cell length interval was found, under and over which primarily central and non-central FtsZ rings, respectively, were observed. This finding correlates well with the previously observed oscillatory movement of MinC and MinD in short and long cells.

The N-terminus promotes oligomerization of the Escherichia coli initiator protein DnaA

Initiation of chromosome replication in Escherichia coli is governed by the interaction of the initiator protein DnaA with the replication origin oriC. Here we present evidence that homo-oligomerization of DnaA via its N-terminus (amino acid residues 1-86) is also essential for initiation. Results from solid-phase protein-binding assays indicate that residues 1-86 (or 1-77) of DnaA are necessary and sufficient for self interaction. Using a 'one-hybrid-system' we found that the DnaA N-terminus can functionally replace the dimerization domain of coliphage lambda cl repressor: a lambdacl-DnaA chimeric protein inhibits lambda plasmid replication as efficiently as lambdacI repressor. DnaA derivatives with deletions in the N-terminus are incapable of supporting chromosome replication from oriC, and, conversely, overexpression of the DnaA N-terminus inhibits initiation in vivo. Together, these results indicate that (i) oligomerization of DnaA N-termini is essential for protein function during initiation, and (ii) oligomerization does not require intramolecular cross-talk with the nucleotide-binding domain III or the DNA-binding domain IV. We propose that E. coli DnaA is composed of largely independent domains - or modules - each contributing a partial, though essential, function to the proper functioning of the 'holoprotein'.

Characterization of the oriI and oriII origins of replication in phage-plasmid P4

In the Escherichia coli phage-plasmid P4, two partially overlapping replicons with bipartite ori sites coexist. The essential components of the oriI replicon are the alpha and cnr genes and the ori1 and crr sites; the oriII replicon is composed of the alpha gene, with the internal ori2 site, and the crr region. The P4 alpha protein has primase and helicase activities and specifically binds type I iterons, present in ori1 and crr. Using a complementation test for plasmid replication, we demonstrated that the two replicons depend on both the primase and helicase activities of the alpha protein. Moreover, neither replicon requires the host DnaA, DnaG, and Rep functions. The bipartite origins of the two replicons share the crr site and differ for ori1 and ori2, respectively. By deletion mapping, we defined the minimal ori1 and ori2 regions sufficient for replication. The ori1 site was limited to a 123-bp region, which contains six type I iterons spaced regularly close to the helical periodicity, and a 35-bp AT-rich region. Deletion of one or more type I iterons inactivated oriI. Moreover, insertion of 6 or 10 bp within the ori1 region also abolished replication ability, suggesting that the relative arrangement of the iterons is relevant. The ori2 site was limited to a 36-bp P4 region that does not contain type I iterons. In vitro, the alpha protein did not bind ori2. Thus, the alpha protein appears to act differently at the two origins of replication.

Functional domains of DnaA proteins

Functional domains of the initiator protein DnaA of Escherichia coli have been defined. Domain 1, amino acids 1-86, is involved in oligomerization and in interaction with DnaB. Domain 2, aa 87-134, constitutes a flexible loop. Domain 3, aa 135-373, contains the binding site for ATP or ADP, the ATPase function, a second interaction site with DnaB, and is required for local DNA unwinding. Domain 4 is required and sufficient for specific binding to DNA. We show that there are three different types of cooperative interactions during the DNA binding of DnaA proteins from E. coli, Streptomyces lividans, and Thermus thermophilus: i) binding to distant binding sites; ii) binding to closely spaced binding sites; and iii) binding to non-canonical binding sites.

Principal causes of hot spots for cytosine to thymine mutations at sites of cytosine methylation in growing cells. A model, its experimental support and implications

In Escherichia coli and human cells, many sites of cytosine methylation in DNA are hot spots for C to T mutations. It is generally believed that T.G mismatches created by the hydrolytic deamination of 5-methylcytosines (5meC) are intermediates in the mutagenic pathway. A number of hypotheses have been proposed regarding the source of the mispaired thymine and how the cells deal with the mispairs. We have constructed a genetic reversion assay that utilizes a gene on a mini-F to compare the frequency of occurrence of C to T mutations in different genetic backgrounds in exponentially growing E. coli. The results identify at least two causes for the hot spot at a 5meC: (1) the higher rate of deamination of 5meC compared to C generates more T.G than uracil.G (U.G) mismatches, and (2) inefficient repair of T.G mismatches by the very short-patch (VSP) repair system compared to the repair of U. G mismatches by the uracil-DNA glycosylase (Ung). This combination of increased DNA damage when the cytosines are methylated coupled with the relative inefficiency in the post-replicative repair of T.G mismatches can be quantitatively modeled to explain the occurrence of the hot spot at 5meC. This model has implications for mutational hot and cold spots in all organisms.

Requirements for and regulation of origin opening of plasmid P1

Origin opening is essential for the initiation of DNA replication in the theta mode and requires binding of initiator proteins. Using reactivity to KMnO4 in vivo as an assay, we find that, like initiation, origin opening of the Escherichia coli plasmid P1 requires the host initiators DnaA and HU and the plasmid-encoded initiator RepA. The ability to detect opening at the P1ori in vivo allowed us to study this activity at various copy numbers in chimeric replicons. The opening was prevented when the P1ori was cloned in high copy vectors or when excess RepA binding sites (iterons) were provided in trans. However, when RepA supply was also increased, the opening was efficient. A further increase in RepA prevented opening. Replication of an incoming P1 under these conditions correlated with opening. These results demonstrate that initiation is possible even at abnormally high origin concentrations and that oversupply of RepA, relative to iterons, can prevent replication by blocking origin opening. It appears that plasmid overreplication can be prevented either by limiting RepA or by accumulating RepA at a rate higher than that of the origin.

Mechanistic studies of initiator-initiator interaction and replication initiation

Unlike the chromosome of Escherichia coli that needs only one replication initiator protein (origin recognition protein) called DnaA, many plasmid replicons require dual initiators: host-encoded DnaA and a plasmid-encoded origin recognition protein, which is believed to be the major determinant of replication control. Hitherto, the relative mechanistic roles of dual initiators in DNA replication were unclear. Here, we present the first evidence that DnaA communicates with the plasmid-encoded pi initiator of R6K and contacts the latter at a specific N-terminal region. Without this specific contact, productive unwinding of plasmid ori gamma and replication is abrogated. The results also show that DnaA performs different roles in host and plasmid replication as revealed by the finding that the ATP-activated form of DnaA, while indispensable for oriC replication, was not required for R6K replication. We have analyzed the accessory role of the DNA bending protein, integration host factor (IHF), in promoting initiator-origin interaction and have found that IHF significantly enhances the binding of DnaA to its cognate site. Collectively, the results further advance our understanding of replication initiation.

The central lysine in the P-loop motif of the Escherichia coli DnaA protein is essential for initiating DNA replication from the chromosomal origin, oriC, and the F factor origin, oriS, but is dispensable for initiation from the P1 plasmid origin, oriR

The Escherichia coli DnaA protein is essential for initiation of DNA replication from the chromosomal origin, oriC, and from certain plasmid origins such as oriR of P1, oriS of F, and ori of pSCS101. The DnaA protein binds ATP with high affinity and contains a P-loop motif assumed to be the binding site. Three mutations in the E. coli dnaA gene were constructed by oligonucleotide-directed mutagenesis that changed amino acids in the P-loop. A DnaA protein, K178T, in which the central lysine was changed to the smaller amino acid threonine, was able to initiate DNA replication from P1 oriR, but was unable to initiate replication from E. coli oriC or F oriS in vivo. Mutant and wild-type DnaA proteins were overexpressed, partially purified, and tested for replication activity in vitro. The K178T DnaA protein could initiate replication from oriR, although with a decreased activity compared to the wild-type DnaA protein. No replication activity was detected for this mutant protein from oriC. The different responses of the oriR and oriC replicons to the K178T DnaA protein indicate that the role of DnaA is different in the two systems.

Replication and control of circular bacterial plasmids

An essential feature of bacterial plasmids is their ability to replicate as autonomous genetic elements in a controlled way within the host. Therefore, they can be used to explore the mechanisms involved in DNA replication and to analyze the different strategies that couple DNA replication to other critical events in the cell cycle. In this review, we focus on replication and its control in circular plasmids. Plasmid replication can be conveniently divided into three stages: initiation, elongation, and termination. The inability of DNA polymerases to initiate de novo replication makes necessary the independent generation of a primer. This is solved, in circular plasmids, by two main strategies: (i) opening of the strands followed by RNA priming (theta and strand displacement replication) or (ii) cleavage of one of the DNA strands to generate a 3'-OH end (rolling-circle replication). Initiation is catalyzed most frequently by one or a few plasmid-encoded initiation proteins that recognize plasmid-specific DNA sequences and determine the point from which replication starts (the origin of replication). In some cases, these proteins also participate directly in the generation of the primer. These initiators can also play the role of pilot proteins that guide the assembly of the host replisome at the plasmid origin. Elongation of plasmid replication is carried out basically by DNA polymerase III holoenzyme (and, in some cases, by DNA polymerase I at an early stage), with the participation of other host proteins that form the replisome. Termination of replication has specific requirements and implications for reinitiation, studies of which have started. The initiation stage plays an additional role: it is the stage at which mechanisms controlling replication operate. The objective of this control is to maintain a fixed concentration of plasmid molecules in a growing bacterial population (duplication of the plasmid pool paced with duplication of the bacterial population). The molecules involved directly in this control can be (i) RNA (antisense RNA), (ii) DNA sequences (iterons), or (iii) antisense RNA and proteins acting in concert. The control elements maintain an average frequency of one plasmid replication per plasmid copy per cell cycle and can "sense" and correct deviations from this average. Most of the current knowledge on plasmid replication and its control is based on the results of analyses performed with pure cultures under steady-state growth conditions. This knowledge sets important parameters needed to understand the maintenance of these genetic elements in mixed populations and under environmental conditions.

The Escherichia coli dnaA gene: four functional domains

The Escherichia coli DnaA protein is a sequence-specific DNA binding protein that promotes the initiation of replication of the bacterial chromosome, and of several plasmids including pSC101. Twenty-eight novel missense mutations of the E. coli dnaA gene were isolated by selecting for their inability to replicate a derivative of pSC101 when contained in a lambda vector. Characterization of these as well as seven novel nonsense mutations and one in-frame deletion mutation are described here. Results suggest that E. coli DnaA protein contains four functional domains. Mutations that affect residues in the P-loop or Walker A motif thought to be involved in ATP binding identify one domain. The second domain maps to a region near the C terminus and is involved in DNA binding. The function of the third domain that maps near the N terminus is unknown but may be involved in the ability of DnaA protein to oligomerize. Two alleles encoding different truncated gene products retained the ability to promote replication from the pSC101 origin but not oriC, identifying a fourth domain dispensable for replication of pSC101 but essential for replication from the bacterial chromosomal origin, oriC.

Novel alleles of the Escherichia coli dnaA gene

The Escherichia coli dnaA gene is required for replication of the bacterial chromosome. To identify residues critical for its replication activity, a method to select novel mutations was developed that relied on lytic growth of lambda from an inserted pSC101 replication origin. Replication from the lambda origin was inhibited by lysogen-encoded cI repressor. Replication from the pSC101 origin that resulted in lytic growth was dependent on active DnaA protein encoded by a plasmid in a host strain lacking the chromosomal dnaA gene. With this approach, a large collection of missense, nonsense, and a few internal deletion mutations were obtained. Nucleotide sequence analysis of the missense mutations indicated that 28 of 50 were unique. Of these, one was identical to the dnaA205 allele whereas the remainder are novel. These missense mutations were clustered into three regions, suggesting three functional domains of DnaA protein required for its replication activity. Many of the missense mutations mapping to the C-terminal 61 residues were inactive for replication from the pSC101 origin. These are defective in DNA binding. Mutations that mapped elsewhere were temperature-sensitive.

Stable DNA replication: interplay between DNA replication, homologous recombination, and transcription

Chromosome replication in Escherichia coli is normally initiated at oriC, the origin of chromosome replication. E. coli cells possess at least three additional initiation systems for chromosome replication that are normally repressed but can be activated under certain specific conditions. These are termed the stable DNA replication systems. Inducible stable DNA replication (iSDR), which is activated by SOS induction, is proposed to be initiated from a D-loop, an early intermediate in homologous recombination. Thus, iSDR is a form of recombination-dependent DNA replication (RDR). Analysis of iSDR and RDR has led to the proposal that homologous recombination and double-strand break repair involve extensive semiconservative DNA replication. RDR is proposed to play crucial roles in homologous recombination, double-strand break repair, restoration of collapsed replication forks, and adaptive mutation. Constitutive stable DNA replication (cSDR) is activated in mhA mutants deficient in RNase HI or in recG mutants deficient in RecG helicase. cSDR is proposed to be initiated from an R-loop that can be formed by the invasion of duplex DNA by an RNA transcript, which most probably is catalyzed by RecA protein. The third form of SDR is nSDR, which can be transiently activated in wild-type cells when rapidly growing cells enter the stationary phase. This article describes the characteristics of these alternative DNA replication forms and reviews evidence that has led to the formulation of the proposed models for SDR initiation mechanisms. The possible interplay between DNA replication, homologous recombination, DNA repair, and transcription is explored.

Characterization of the replicon of plasmid pSW500 of Erwinia stewartii

A 1.6-kb DNA region required for the replication of pSW500 from Erwinia stewartii SW2 has been identified. DNA sequencing analysis revealed that this DNA fragment consists of a DnaA box, seven 16-bp direct repeats, and a 1005-bp open reading frame. The seven direct repeats have been demonstrated to mediate the incompatibility function of the plasmid. Primer extension analysis showed that the 1005-bp ORF is transcribed in vivo and the +1 site of the transcript is located 113 bp upstream from the translation initiation codon of the ORF. Complementation studies showed that this ORF is required for the replication of the plasmid and may encode a replication protein, RepA. Gene fusion studies revealed that the expression of repA is autoregulated by RepA. We also found that the pSW500 replicon has a copy number of approximately two and that the plasmid is stably maintained in Escherichia coli, thus demonstrating that the replicon contains all the elements required for copy number control and plasmid stability in E. coli. Curing of pSW500 from E. stewartii SW2 revealed that loss of pSW500 did not have any obvious effect on morphology or physiology of the cells, suggesting that pSW500 does not encode a function that is indispensable for the survival of the organism.

Novel alleles of the Escherichia coli dnaA gene are defective in replication of pSC101 but not of oriC

Five novel alleles of the Escherichia coli dnaA gene that were temperature sensitive in maintenance of pSC101, a plasmid that is dependent on this gene for replication, were isolated. Nucleotide sequence analysis revealed that four of the five alleles arose from single base substitutions, whereas the fifth contained three base substitutions, two of which were silent. Whereas all five alleles were temperature sensitive in vivo for pSC101 maintenance, genetic and biochemical characterization indicated that only two were defective in replication from the chromosomal origin, oriC. As previously characterized mutations are defective in replication for both pSC101 and oriC, the dnaA mutations specifically defective in pSC101 maintenance represent a novel class. We speculate that one or more of these pSC101-specific mutants are defective in interaction with pSC101 RepA protein, which is also required for initiation of plasmid DNA replication.

Characterization of the basic replicon of pCM1, a narrow-host-range plasmid from the moderate halophile Chromohalobacter marismortui

The moderately halophilic bacterium Chromohalobacter marismortui contains a 17.5-kb narrow-host-range plasmid, pCM1, which shows interesting properties for the development of cloning vectors for the genetic manipulation of this important group of extremophiles. Plasmid pCM1 can stably replicate and is maintained in most gram-negative moderate halophiles tested. The replication origin has been identified and sequenced, and the minimal pCM1 replicon has been localized to a 1,600-bp region which includes two functionally discrete regions, the oriV region and the repA gene. oriV, located on a 700-bp fragment, contains four iterons 20 bp in length adjacent to a DnaA box that is dispensable but required for efficient replication of pCM1, and it requires trans-acting functions. The repA gene, which encodes a replication protein of 289 residues, is similar to the replication proteins of other gram-negative bacteria.

DNA-binding domain of the RepE initiator protein of mini-F plasmid: involvement of the carboxyl-terminal region

The RepE initiator protein (251 residues) is essential for mini-F replication in Escherichia coli and exhibits two major functions: initiation of DNA replication from ori2 and autogenous repression of repE transcription. Whereas the initiation is mediated by RepE monomers that bind to the ori2 iterons (direct repeats), the autogenous repression is mediated by dimers that bind to the repE operator, which contains an inverted repeat sequence related to the iterons. We now report that the binding of RepE to these DNA sites is primarily determined by the C-terminal region of this protein. The mutant RepE proteins lacking either the N-terminal 33 (or more) residues or the C-terminal 7 (or more) residues were first shown to be defective in binding to both the ori2 and the operator DNAs. However, direct screening and analysis of mutant RepEs which are specifically affected in binding to the ori2 iterons revealed that the mutations (mostly amino acid substitutions) occur exclusively in the C-terminal region (residues 168 to 242). These mutant proteins exhibited reduced binding to ori2 and no detectable binding to the operator. Thus, whereas truncation of either end of RepE can destroy the DNA-binding activities, the C-terminal region appears to represent a primary DNA-binding domain of RepE for both ori2 and the operator. Analogous DNA-binding domains seem to be conserved among the initiator proteins of certain related plasmids.

DNA replication studies with coliphage 186: the involvement of the Escherichia coli DnaA protein in 186 replication is indirect

The inability of coliphage 186 to infect productively a dnaA(Ts) mutant at a restrictive temperature was confirmed. However, the requirement by 186 for DnaA is indirect, since 186 can successfully infect suppressed dnaA (null) strains. The block to 186 infection of a dnaA(Ts) strain at a restrictive temperature is at the level of replication but incompletely so, since some 20% of the phage specific replication seen with infection of a dnaA+ host does occur. A mutant screen, to isolate host mutants blocked in 186-specific replication but not in the replication of the close relative coliphage P2, which has no DnaA requirement, yielded a mutant whose locus we mapped to the rep gene. A 186 mutant able to infect this rep mutant was isolated, and the mutation was located in the phage replication initiation endonuclease gene A, suggesting direct interaction between the Rep helicase and phage endonuclease during replication. DNA sequencing indicated a glutamic acid-to-valine change at residue 155 of the 694-residue product of gene A. In the discussion, we speculate that the indirect need of DnaA function is at the level of lagging-strand synthesis in the rolling circle replication of 186.