Rack-induced metal binding vs. flexibility: Met121His azurin crystal structures at different pH

Chemical protein synthesis enabled engineering of saccharide oxidative cleavage activity in artificial metalloenzymes

Chemical protein (semi-)synthesis is a powerful technique allowing the incorporation of unnatural functionalities at any desired protein site. Herein we describe a facile one-pot semi-synthetic strategy for the construction of a type 2 copper center in the active site of azurin, which is achieved by substitution of Met121 with unnatural amino acid residues bearing a strong ligand N,N-bis(pyridylmethyl)amine (DPA) to mimic the function of typical histidine brace-bearing copper monooxygenases, such as lytic polysaccharide monooxygenases (LPMOs) involved in polysaccharide breakdown. The semi-synthetic proteins were routinely obtained in over 10-mg scales to allow for spectroscopic measurements (UV-Vis, CD, and EPR), which provides structural evidences for the CuII-DPA-modified azurins. 4-nitrophenyl-β-D-glucopyranoside (PNPG) was used as a model substrate for the H2O2-driven oxidative cleavage reaction facilitated by semi-synthetic azurins, and the CuII-6 complex showed a highest activity (TTN 253). Interestingly, our semi-synthetic azurins were able to tolerate high H2O2 concentrations (up to 4000-fold of the enzyme), making them promising for practical applications. Collectively, we establish that chemical protein synthesis can be exploited as a reliable technology in affording large quantities of artificial metalloproteins to facilitate the transformation of challenging chemical reactions.

Reparameterization of Non-Bonded Parameters for Copper Ions in Plastocyanin: An Adaptive Force Matching Study

Molecular mechanics rely on existing experimental and theoretical inputs to confidently calculate the trajectories of molecular systems. These calculations, however, are often hindered by missing force field parameters. A notable subject of this problem is metal centers of proteins. This study parameterized, through an adaptive force matching (AFM) workflow, the copper cofactor of plastocyanin in its two oxidation states. New 12-6 Lennard-Jones (LJ) parameters and atomic partial charges were generated to complete the non-bonded description of the copper site. Our models show uniform distorted tetrahedral structures for reduced plastocyanin, Cu(I), and oxidized plastocyanin, Cu(II). These structures align with the QM/MM MD results and existing crystallography studies. TD-DFT calculations, meanwhile, showed that conformations with elongated axial Cu-SMet and shortened equatorial Cu-SCys bonds retain the experimental UV-Vis profile of blue copper (BC) proteins, thus signifying the importance of Cu-S interactions on BC proteins' unique spectroscopic properties.

Symmetry Breaking in Solution-Phase [Cu(tsc)2(H2O)2]2+: Emergent Asymmetry in Cu-S Distances and in Covalence

The structure of aqueous Cu(II)-bis-thiosemicarbazide, [Cu(tsc)₂]²⁺, is reported following EXAFS and MXAN analyses of the copper K-edge X-ray absorption (XAS) spectrum. The rising K-edge feature at 8987.1 eV is higher energy than those of crystalline models, implying unique electronic and structural solution states. EXAFS analysis (k = 2-13 Å^-1; 2 × Cu-N = 2.02 ± 0.01 Å; 2 × Cu-S = 2.27 ± 0.01 Å; Cu-O_ax = 2.41 ± 0.04 Å) could not resolve 5- versus 6-coordinate models. However, MXAN fits converged to an asymmetric broken symmetry 6-coordinate model with cis-disposed TSC ligands (Cu-O_ax = 2.07 and 2.54 Å; Cu-N = 1.94 Å, 1.98 Å; Cu-S = 2.20 Å, 2.41 Å). Transition dipole integral evaluation of the sulfur K-edge XAS 1s → 3p valence transition feature at 2470.7 eV yielded a Cu-S covalence of 0.66 e^-, indicating Cu^1.34+. The high Cu-S covalence and short Cu-S bond in aqueous [Cu(tsc)₂(H₂O)₂]²⁺ again contradict the need for a protein rack to explain the unique structure of the blue copper active site. MXAN models of dissolved Cu(II) complex ions have invariably featured broken centrosymmetry. The potential energy ground state for dissolved Cu(II) evidently includes the extended solvation field, providing a target for improved physical theory. A revised solvation model for aqueous Cu(II), |[Cu(H₂O)₅]·14H₂O|²⁺, is presented.

Universal Architectural Concepts Underlying Protein Folding Patterns

What is the architectural “basis set” of the observed universe of protein structures? Using information-theoretic inference, we answer this question with a dictionary of 1,493 substructures—called concepts—typically at a subdomain level, based on an unbiased subset of known protein structures. Each concept represents a topologically conserved assembly of helices and strands that make contact. Any protein structure can be dissected into instances of concepts from this dictionary. We dissected the Protein Data Bank and completely inventoried all the concept instances. This yields many insights, including correlations between concepts and catalytic activities or binding sites, useful for rational drug design; local amino-acid sequence–structure correlations, useful for ab initio structure prediction methods; and information supporting the recognition and exploration of evolutionary relationships, useful for structural studies. An interactive site, Proçodic, at http://lcb.infotech.monash.edu.au/prosodic (click), provides access to and navigation of the entire dictionary of concepts and their usages, and all associated information. This report is part of a continuing programme with the goal of elucidating fundamental principles of protein architecture, in the spirit of the work of Cyrus Chothia.

[Cu(aq)]2+ is structurally plastic and the axially elongated octahedron goes missing

High resolution (k = 18 Å^-1 or k = 17 Å^-1) copper K-edge EXAFS and MXAN (Minuit X-ray Absorption Near Edge) analyses have been used to investigate the structure of dissolved [Cu(aq)]²⁺ in 1,3-propanediol (1,3-P) or 1,5-pentanediol (1,5-P) aqueous frozen glasses. EXAFS analysis invariably found a single axially asymmetric 6-coordinate (CN6) site, with 4×O_eq = 1.97 Å, O_ax1 = 2.22 Å, and O_ax2 = 2.34 Å, plus a second-shell of 4×O_water = 3.6 Å. However, MXAN analysis revealed that [Cu(aq)]²⁺ occupies both square pyramidal (CN5) and axially asymmetric CN6 structures. The square pyramid included 4×H₂O = 1.95 Å and 1×H₂O = 2.23 Å. The CN6 sites included either a capped, near perfect, square pyramid with 5×H₂O = 1.94 ± 0.04 Å and H₂O_ax = 2.22 Å (in 1,3-P) or a split axial configuration with 4×H₂O = 1.94, H₂O_ax1 = 2.14 Å, and H₂O_ax2 = 2.28 Å (in 1,5-P). The CN6 sites also included an 8-H₂O second-shell near 3.7 Å, which was undetectable about the strictly pyramidal sites. Equatorial angles averaging 94° ± 5° indicated significant departures from tetragonal planarity. MXAN assessment of the solution structure of [Cu(aq)]²⁺ in 1,5-P prior to freezing revealed the same structures as previously found in aqueous 1M HClO₄, which have become axially compressed in the frozen glasses. [Cu(aq)]²⁺ in liquid and frozen solutions is dominated by a 5-coordinate square pyramid, but with split axial CN6 appearing in the frozen glasses. Among these phases, the Cu-O axial distances vary across 1 Å, and the equatorial angles depart significantly from the square plane. Although all these structures remove the d_x²-y² , d_z² degeneracy, no structure can be described as a Jahn-Teller (JT) axially elongated octahedron. The JT-octahedral description for dissolved [Cu(aq)]²⁺ should thus be abandoned in favor of square pyramidal [Cu(H₂O)₅]²⁺. The revised ligand environments have bearing on questions of the Cu(i)/Cu(ii) self-exchange rate and on the mechanism for ligand exchange with bulk water. The plasticity of dissolved Cu(ii) complex ions falsifies the foundational assumption of the rack-induced bonding theory of blue copper proteins and obviates any need for a thermodynamically implausible protein constraint.

Modular Artificial Cupredoxins

Cupredoxins are electron-transfer proteins that have active sites containing a mononuclear Cu center with an unusual trigonal monopyramidal structure (Type 1 Cu). A single Cu-Scys bond is present within the trigonal plane that is responsible for its unique physical properties. We demonstrate that a cysteine-containing variant of streptavidin (Sav) can serve as a protein host to model the structure and properties of Type 1 Cu sites. A series of artificial Cu proteins are described that rely on Sav and a series of biotinylated synthetic Cu complexes. Optical and EPR measurements highlight the presence of a Cu-Scys bond, and XRD analysis provides structural evidence. We further provide evidence that changes in the linker between the biotin and Cu complex within the synthetic constructs allows for small changes in the placement of Cu centers within Sav that have dramatic effects on the structural and physical properties of the resulting artificial metalloproteins. These findings highlight the utility of the biotin-Sav technology as an approach for simulating active sites of metalloproteins.

Reversible S-nitrosylation in an engineered azurin

S-Nitrosothiols are known as reagents for NO storage and transportation and as regulators in many physiological processes. Although the S-nitrosylation catalysed by haem proteins is well known, no direct evidence of S-nitrosylation in copper proteins has been reported. Here, we report reversible insertion of NO into a copper-thiolate bond in an engineered copper centre in Pseudomonas aeruginosa azurin by rational design of the primary coordination sphere and tuning its reduction potential by deleting a hydrogen bond in the secondary coordination sphere. The results not only provide the first direct evidence of S-nitrosylation of Cu(II)-bound cysteine in metalloproteins, but also shed light on the reaction mechanism and structural features responsible for stabilizing the elusive Cu(I)-S(Cys)NO species. The fast, efficient and reversible S-nitrosylation reaction is used to demonstrate its ability to prevent NO inhibition of cytochrome bo3 oxidase activity by competing for NO binding with the native enzyme under physiologically relevant conditions.

Design and fine-tuning redox potentials of metalloproteins involved in electron transfer in bioenergetics

Redox potentials are a major contributor in controlling the electron transfer (ET) rates and thus regulating the ET processes in the bioenergetics. To maximize the efficiency of the ET process, one needs to master the art of tuning the redox potential, especially in metalloproteins, as they represent major classes of ET proteins. In this review, we first describe the importance of tuning the redox potential of ET centers and its role in regulating the ET in bioenergetic processes including photosynthesis and respiration. The main focus of this review is to summarize recent work in designing the ET centers, namely cupredoxins, cytochromes, and iron-sulfur proteins, and examples in design of protein networks involved these ET centers. We then discuss the factors that affect redox potentials of these ET centers including metal ion, the ligands to metal center and interactions beyond the primary ligand, especially non-covalent secondary coordination sphere interactions. We provide examples of strategies to fine-tune the redox potential using both natural and unnatural amino acids and native and nonnative cofactors. Several case studies are used to illustrate recent successes in this area. Outlooks for future endeavors are also provided. This article is part of a Special Issue entitled Biodesign for Bioenergetics--the design and engineering of electronic transfer cofactors, proteins and protein networks, edited by Ronald L. Koder and J.L. Ross Anderson.

A high-resolution XAS study of aqueous Cu(II) in liquid and frozen solutions: pyramidal, polymorphic, and non-centrosymmetric

High-resolution EXAFS (k = 18 Å(-1)) and MXAN XAS analyses show that axially elongated square pyramidal [Cu(H2O)5](2+) dominates the structure of Cu(II) in aqueous solution, rather than 6-coordinate JT-octahedral [Cu(H2O)6](2+). Freezing produced a shoulder at 8989.6 eV on the rising XAS edge and an altered EXAFS spectrum, while 1s → 3d transitions remained invariant in energy position and intensity. Core square pyramidal [Cu(H2O)5](2+) also dominates frozen solution. Solvation shells were found at ∼3.6 Å (EXAFS) or ∼3.8 Å (MXAN) in both liquid and frozen phases. However, MXAN analysis revealed that about half the time in liquid solution, [Cu(H2O)5](2+) associates with an axially non-bonding 2.9 Å water molecule. This distant water apparently organizes the solvation shell. When the 2.9 Å water molecule is absent, the second shell is undetectable to MXAN. The two structural arrangements may represent energetic minima of fluxional dissolved aqueous [Cu(H2O)5](2+). The 2.9 Å trans-axial water resolves an apparent conflict of the [Cu(H2O)5](2+) core model with a dissociational exchange mechanism. In frozen solution, [Cu(H2O)5](2+) is associated with either a 3.0 Å axial non-bonded water molecule or an axial ClO4(-) at 3.2 Å. Both structures are again of approximately equal presence. When the axial ClO4(-) is present, Cu(II) is ∼0.5 Å above the mean O4 plane. This study establishes [Cu(H2O)5](2+) as the dominant core structure for Cu(II) in water solution, and is the first to both empirically resolve multiple extended solution structures for fluxional [Cu(H2O)5](2+) and to provide direct evidence for second shell dynamics.

Modulating the Copper-Sulfur Interaction in Type 1 Blue Copper Azurin by Replacing Cys112 with Nonproteinogenic Homocysteine

The Cu-SCys interaction is known to play a dominant role in defining the type 1 (T1) blue copper center with respect to both its electronic structure and electron transfer function. Despite this importance, its role has yet to be probed by mutagenesis studies without dramatic change of its T1 copper character. We herein report replacement of the conserved Cys112 in azurin with the nonproteinogenic amino acid homocysteine. Based on electronic absorption, electron paramagnetic resonance, and extended x-ray absorption fine structural spectroscopic studies, this variant displays typical type 1 copper site features. Surprisingly, instead of increasing the strength of the Cu-sulfur interaction by the introduction of the extra methylene group, the Cys112Hcy azurin showed a decrease in the covalent interaction between SHcy and Cu(II) when compared with the WT SCys-Cu(II) interaction. This is likely due to geometric adjustment of the center that resulted in the copper ion moving out of the trigonal plane defined by two histidines and one Hcy and closer to Met121. These structural changes resulted in an increase of reduction potential by 35 mV, consistent with lower Cu-S covalency. These results suggest that the Cu-SCys interaction is close to being optimal in native blue copper protein. It also demonstrates the power of using nonproteinogenic amino acids in addressing important issues in bioinorganic chemistry.

Flexibility of the metal-binding region in apo-cupredoxins

Protein-mediated electron transfer is an essential event in many biochemical processes. Efficient electron transfer requires the reorganization energy of the redox event to be minimized, which is ensured by the presence of rigid donor and acceptor sites. Electron transfer copper sites are present in the ubiquitous cupredoxin fold, able to bind one or two copper ions. The low reorganization energy in these metal centers has been accounted for by assuming that the protein scaffold creates an entatic/rack-induced state, which gives rise to a rigid environment by means of a preformed metal chelating site. However, this notion is incompatible with the need for an exposed metal-binding site and protein-protein interactions enabling metallochaperone-mediated assembly of the copper site. Here we report an NMR study that reveals a high degree of structural heterogeneity in the metal-binding region of the nonmetallated Cu(A)-binding cupredoxin domain, arising from microsecond to second dynamics that are quenched upon metal binding. We also report similar dynamic features in apo-azurin, a paradigmatic blue copper protein, suggesting a general behavior. These findings reveal that the entatic/rack-induced state, governing the features of the metal center in the copper-loaded protein, does not require a preformed metal-binding site. Instead, metal binding is a major contributor to the rigidity of electron transfer copper centers. These results reconcile the seemingly contradictory requirements of a rigid, occluded center for electron transfer, and an accessible, dynamic site required for in vivo copper uptake.

The X-ray absorption spectroscopic model of the copper(II) imidazole complex ion in liquid aqueous solution: a strongly solvated square pyramid

Cu K-edge extended X-ray absorption fine structure (EXAFS) and Minuit X-ray absorption near-edge structure (MXAN) analyses were combined to evaluate the structure of the copper(II) imidazole complex ion in liquid aqueous solution. Both methods converged to the same square-pyramidal inner coordination sphere [Cu(Im)(4)L(ax)](2+) (L(ax) indeterminate) with four equatorial nitrogen atoms at EXAFS, 2.02 ± 0.01 Å, and MXAN, 1.99 ± 0.03 Å. A short-axial N/O scatterer (L(ax)) was found at 2.12 ± 0.02 Å (EXAFS) or 2.14 ± 0.06 Å (MXAN). A second but very weak axial Cu-N/O interaction was found at 2.9 ± 0.1 Å (EXAFS) or 3.0 ± 0.1 Å (MXAN). In the MXAN fits, only a square-pyramidal structural model successfully reproduced the doubled maximum of the rising K-edge X-ray absorption spectrum, specifically excluding an octahedral model. Both EXAFS and MXAN also found eight outlying oxygen scatterers at 4.2 ± 0.3 Å that contributed significant intensity over the entire spectral energy range. Two prominent rising K-edge shoulders at 8987.1 and 8990.5 eV were found to reflect multiple scattering from the 3.0 Å axial scatterer and the imidazole rings, respectively. In the MXAN fits, the imidazole rings took in-plane rotationally staggered positions about copper. The combined (EXAFS and MXAN) model for the unconstrained cupric imidazole complex ion in liquid aqueous solution is an axially elongated square-pyramidal core, with a weak nonbonded interaction at the second axial coordination position and a solvation shell of eight nearest-neighbor water molecules. This core square-pyramidal motif has persisted through [Cu(H(2)O)(5)](2+), [Cu(NH(3))(4)(NH(3),H(2)O)](2+), (1, 2) and now [Cu(Im)(4)L(ax))](2+) and appears to be the geometry preferred by unconstrained aqueous-phase copper(II) complex ions.

Outer-sphere effects on reduction potentials of copper sites in proteins: the curious case of high potential type 2 C112D/M121E Pseudomonas aeruginosa azurin

Redox and spectroscopic (electronic absorption, multifrequency electron paramagnetic resonance (EPR), and X-ray absorption) properties together with X-ray crystal structures are reported for the type 2 Cu(II) C112D/M121E variant of Pseudomonas aeruginosa azurin. The results suggest that Cu(II) is constrained from interaction with the proximal glutamate; this structural frustration implies a "rack" mechanism for the 290 mV (vs NHE) reduction potential measured at neutral pH. At high pH (∼9), hydrogen bonding in the outer coordination sphere is perturbed to allow axial glutamate ligation to Cu(II), with a decrease in potential to 119 mV. These results highlight the role played by outer-sphere interactions, and the structural constraints they impose, in determining the redox behavior of transition metal protein cofactors.

Transforming a blue copper into a red copper protein: engineering cysteine and homocysteine into the axial position of azurin using site-directed mutagenesis and expressed protein ligation

Interactions of the axial ligand with its blue copper center are known to be important in tuning spectroscopic and redox properties of cupredoxins. While conversion of the blue copper center with a weak axial ligand to a green copper center containing a medium strength axial ligand has been demonstrated in cupredoxins, converting the blue copper center to a red copper center with a strong axial ligand has not been reported. Here we show that replacing Met121 in azurin from Pseudomonas aeruginosa with Cys caused an increased ratio (R(L)) of absorption at 447 nm over that at 621 nm. Whereas no axial Cu-S(Cys121) interaction in Met121Cys was detectable by extended X-ray absorption fine structure (EXAFS) spectroscopy at pH 5, similar to what was observed in native azurin with Met121 as the axial ligand, the Cu-S(Cys121) interaction at 2.74 A is clearly visible at higher pH. Despite the higher R(L) and stronger axial Cys121 interaction with Cu(II) ion, the Met121Cys variant remains largely a type 1 copper protein at low pH (with hyperfine coupling constant A( parallel) = 54 x 10(-4) cm(-1) at pH 4 and 5), or distorted type 1 or green copper protein at high pH (A(parallel) = 87 x 10(-4) cm(-1) at pH 8 and 9), attributable to the relatively long distance between the axial ligand and copper and the constraint placed by the protein scaffold. To shorten the distance between axial ligand and copper, we replaced Met121 with a nonproteinogenic amino acid homocysteine that contains an extra methylene group, resulting in a variant whose spectra (R(L)= 1.5, and A(parallel) = 180 x 10(-4) cm(-1)) and Cu-S(Cys) distance (2.22 A) are very similar to those of the red copper protein nitrosocyanin. Replacing Met121 with Cys or homocysteine resulted in lowering of the reduction potential from 222 mV in the native azurin to 95 +/- 3 mV for Met121Cys azurin and 113 +/- 6 mV for Met121Hcy azurin at pH 7. The results strongly support the "coupled distortion" model that helps explain axial ligand tuning of spectroscopic properties in cupredoxins, and demonstrate the power of using unnatural amino acids to address critical chemical biological questions.

The copper centers of tyramine β-monooxygenase and its catalytic-site methionine variants: an X-ray absorption study

Tyramine β-monooxygenase (TBM) is a member of a family of copper monooxygenases containing two noncoupled copper centers, and includes peptidylglycine monooxygenase and dopamine β-monooxygenase. In its Cu(II) form, TBM is coordinated by two to three His residues and one to two non-His O/N ligands consistent with a [Cu(M)(His)(2)(OH(2))(2)-Cu(H)(His)(3)(OH(2))] formulation. Reduction to the Cu(I) state causes a change in the X-ray absorption spectroscopy (XAS) spectrum, consistent with a change to a [Cu(M)(His)(2)S(Met)-Cu(H)(His)(3)] environment. Lowering the pH to 4.0 results in a large increase in the intensity of the Cu(I)-S extended X-ray absorption fine structure (EXAFS) component, suggesting a tighter Cu-S bond or the coordination of an additional sulfur donor. The XAS spectra of three variants, where the Cu(M) Met471 residue had been mutated to His, Cys, and Asp, were examined. Significant differences from the wild-type enzyme are evident in the spectra of the reduced mutants. Although the side chains of His, Cys, and Asp are expected to substitute for Met at the Cu(M) site, the data showed identical spectra for all three reduced variants, with no evidence for coordination of residue 471. Rather, the K-edge data suggested a modest decrease in coordination number, whereas the EXAFS indicated an average of two His residues at each Cu(I) center. These data highlight the unique role of the Met residue at the Cu(M) center, and pose interesting questions as to why replacement by the cuprophilic thiolate ligand leads to detectable activity whereas replacement by imidazole generates inactive TBM.

Reduction potential tuning of the blue copper center in Pseudomonas aeruginosa azurin by the axial methionine as probed by unnatural amino acids

The conserved axial ligand methionine 121 from Pseudomonas aeruginosa azurin (Az) has been replaced by isostructural unnatural amino acid analogues, oxomethionine (OxM), difluoromethionine (DFM), trifluoromethionine (TFM), selenomethionine (SeM), and norleucine (Nle) using expressed protein ligation. The replacements resulted in < 6 nm shifts in the S(Cys)-Cu charge transfer (CT) band in the electronic absorption spectra and < 8 gauss changes in the copper hyperfine coupling constants (AII) in the X-band electron paramagnetic resonance spectra, suggesting that isostructural replacement of Met resulted in minimal structural perturbation of the copper center. The slight blue shifts of the CT band follow the trend of stronger electronegativity of the ligands. This trend is supported by 19F NMR studies of the fluorinated methionine analogues. However, the order of AII differs, suggesting additional factors influencing AII. In contrast to the small changes in the UV-vis and EPR spectra, a large variation of > 227 mV in reduction potential was observed for the series of variants reported here. Additionally, a linear correlation was established between the reduction potentials and hydrophobicity of the variants. Extension of this analysis to other type 1 copper-containing proteins reveals a linear correlation between change in hydrophobicity and change in reduction potential, independent of the protein scaffold, experimental conditions, measurement techniques, and steric modifications. This analysis has also revealed for the first time high and low potential states for type 1 centers, and the difference may be attributable to destabilization of the protein fold by disruption of hydrophobic or hydrogen bonding interactions that stabilize the type 1 center.

Studies of a Dinuclear Manganese Complex with Phenoxo and Bis-acetato Bridging in the Mn2(II,II) and Mn2(II,III) States: Coordination Structural Shifts and Oxidation State Control in Bridged Dinuclear Complexes

The dinucleating ligand, 2,6-bis{[(2-(2-pyridyl)ethyl)(2-pyridylmethyl)-amino]-methyl}-4-methylphenol) (L1OH) reacts with Mn(ClO4)2.6H2O to form the dinuclear complex [Mn2(II,II)(L1O)(mu-OOCCH3)2]ClO4 (1). The electrolytic oxidation of 1 at 0.7 V (vs Ag/AgCl) produces the mixed valent complex [Mn2(II,III)(L1O)(mu-OOCCH3)2](ClO4)2 (1ox) quantitatively, while electrolysis at 0.20 V converts 1ox back to 1. X-ray crystallographic structures show that both 1 and 1ox are dinuclear complexes in which the two manganese ions are each in distorted octahedral coordination environments bridged by the phenoxo oxygen and two acetate ions. The structural changes that occur upon the oxidation 1 to 1ox suggest an extended pi-bonding system involving the phenoxo ring C-O(phenoxo)-Mn(II)-N(pyridyl) chain. In addition, as 1 is oxidized to 1ox, the rearrangements in the coordination sphere resulting from the oxidation of one Mn(II) ion to Mn(III) are transmitted via the bridging Mn-O(phenoxo) bonds and cause structural changes that render the site of the second manganese ion unfit for the +3 state and hence unstable to reduction. Thus the electrolytic oxidation of 1ox in acetonitrile at 1.20 V takes up slightly greater than 1 F of charge/mol of 1ox, but the starting complex, 1ox, is recovered, showing the instability of the Mn2(III,III) state that is formed with respect to reduction to 1ox. Variable-temperature magnetic susceptibility measurements of 1 and 1ox over the temperature range from 1.8 to 300 K can be modeled with magnetic coupling constants J = -4.3 and -4.1 cm(-1), respectively showing the weak antiferromagnetic coupling between the two manganese ions in each dinuclear complex, which is commonly observed among similar phenoxo- and bis-1,3-carboxylato-bridged dinuclear Mn2(II,II) and Mn2(II,III) complexes.

Ligand and loop variations at type 1 copper sites: influence on structure and reactivity

Type 1 (T1) copper sites promote biological electron transfer and are found in the cupredoxins and a number of copper-containing enzymes including the multi-copper oxidases. A T1 copper site usually has a distorted tetrahedral geometry with strong ligands provided by the thiolate sulfur of a Cys and the imidazole nitrogens of two His residues. The active site structure is typically completed by a weak axial Met ligand (a second weak axial interaction is found in azurin resulting in a trigonal bipyramidal geometry). The axial Met is not conserved and Gln, Phe, Leu and Val are also found in this position. Three of the four ligands at a T1 copper site are situated on a single C-terminal loop whose length and structure varies. Studies are discussed which investigate both the influence of physiologically relevant axial ligand alterations, and also of mutations to the length and structure of the ligand-containing loop, on the properties of T1 copper sites.

Synthesis, Structure, and Electrochemical Properties of Copper(I) Complexes with S/N Homoscorpionate and Heteroscorpionate Ligands

Dinuclear Cu(I) complexes with bifunctionalized homoscorpionate ligands, hydrotris(thioxotriazolyl)borato [Li(Tr(Me,o)(-)(Py)) (1) and Li(Tr(Mes,Me)) (2)], and the heteroscorpionate ligand hydro[bis(thioxotriazolyl)-3-(2-pyridyl)pyrazolyl]borato [K(Br(Mes)pz(o)(-)(Py))] (3) were synthesized and crystallographically characterized. The complexes [Cu(Tr(Mes,Me))](2) (4) and [Cu(Tr(Me,o)(-)(Py))](2) (5) exhibit a similar coordination geometry where every metal is surrounded by three thioxo groups in a trigonal arrangement. The presence of a [B-H...Cu] three-center-two-electron interaction in both compounds causes the overall coordination to become tetrahedrally distorted (S(3)H coordination for each metal). The complex [Cu(Br(Mes)pz(o)(-)(Py))](2) (6) presents a trigonal geometry in which the metals interact with two thioxo groups and a bridging pyrazolyl nitrogen atom. A weak contact with a pyridine nitrogen atom completes the coordination of the metals (S(2)N,N' coordination for each metal). [Cu(Tr(Mes,Me))](2), [Cu(Tr(Me,o)(-)(Py))](2), and [Cu(Br(Mes)pz(o)(-)(Py))](2) exhibit fluxional behavior in solution as evidenced by variable-temperature NMR spectroscopy, and for 5 and 6 two species in equilibrium [in the ratio 2/1 for 5 (CDCl(3)) and 3/2 for 6 (CD(2)Cl(2))] are distinguishable in the (1)H NMR spectra at 270 K. 2D-NOESY spectra recorded at 270 K assisted in the attribution of solution molecular geometries for each isomer of 5 and 6. The free energy of activation (DeltaG()(Tc)) was determined for both equilibria from the evaluation of the coalescence temperature. DFT calculations were performed to describe plausible molecular geometry for the minor isomer of 5 and 6 and to propose a possible mechanism of interconversion between major and minor isomers. Cyclic voltammograms were recorded in CH(2)Cl(2) (3 and 6) or CH(2)Cl(2)/CH(3)CN (1/1, v/v) (2, 4, and 5) solutions using 0.1 M TBAHFP or TBAOTf as supporting electrolytes. [Cu(Tr(Mes,Me))](2), [Cu(Tr(Me,o)(-)(Py))](2), and [Cu(Br(Mes)pz(o)(-)(Py))](2) exhibit a quasi-reversible Cu(I)/Cu(II) redox behavior with E(pa) = +719 mV and E(pc) = +538 mV for 4, E(pa) = +636 mV and E(pc) = -316 mV for 5, and E(pa) = +418 mV and E(pc) = -319 mV for 6.

Alkali and halide-resistant catalysis by the multipotent oxidase from Marinomonas mediterranea

The incorporation of fungal laccases into novel applications has been delayed mainly due to their intrinsic sensitivity towards halides and alkaline conditions. In order to explore new sources of enzymes we evaluated the multipotent polyphenol oxidase PPO1 from the marine bacterium Marinomonas mediterranea. Here we report that, in contrast to its fungal counterparts, PPO1 remained functional above neutral pH presenting high specificity for phenolic compounds, in particular for methoxyl-substituted mono-phenols and catechols. These properties, in addition to its tolerance towards chloride (up to 1 M) and its elevated redox potential at neutral pH (0.9 V), suggest this enzyme may be an interesting candidate for specific applications such as the Amperometric determination of phenolic compounds and bio-fuel cells.

Demethylation of 3-Methylthymine in DNA by Bacterial and Human DNA Dioxygenases

Rare DNA lesions that are chemically stable and refractory to repair may add disproportionately to the accumulation of mutations in long lived cells. 3-Methylthymine is a minor lesion that is induced by DNA-methylating agents and for which no repair process has been described previously. Here we demonstrate that this lesion can be directly demethylated in vitro by bacterial and human DNA dioxygenases. The Escherichia coli AlkB and human ABH3 proteins repaired 3-methylthymine in both single-stranded and double-stranded polydeoxynucleotides, whereas the human ABH2 protein preferred a duplex substrate. Thus, the known substrates of these enzymes now include 3-methylthymine in DNA, as well as 1-methyladenine and 3-methylcytosine, which all have structurally similar sites of alkylation. Repair of 3-methylthymine by AlkB and ABH3 was optimal at pH 6, but inefficient. At physiological pH, 3-methylthymine, which is a minor methylated lesion, was more slowly repaired than the major lesion generated in single-stranded DNA, 3-methylcytosine. Our data suggest that 3-methylthymine residues in DNA will be repaired inefficiently in vivo and therefore may occur at a low steady-state level, but the residues should not gradually accumulate to high levels in long lived cells.

Probing the role of axial methionine in the blue copper center of azurin with unnatural amino acids

Expressed protein ligation was used to replace the axial methionine of the blue copper protein azurin from Pseudomonas aeruginosa with unnatural amino acids. The highly conserved methionine121 residue was replaced with the isostructural amino acids norleucine (Nle) and selenomethionine (SeM). The UV-visible absorption, X- and Q-band EPR, and Cu EXAFS spectra of the variants are slightly perturbed from WT. All variants have a predominant S(Cys) to Cu(II) charge transfer band around 625 nm and narrow EPR hyperfine splittings. The Se EXAFS of the M121SeM variant is also reported. In contrast to the small spectral changes, the reduction potentials of M121SeM, M121Leu, and M121Nle are 25, 135, and 140 mV, respectively, higher than that of WT azurin. The use of unnatural amino acids allowed deconvolution of different factors affecting the reduction potentials of the blue copper center. A careful analysis of the WT azurin and its variants obtained in this work showed the large reduction potential variation was linearly correlated with the hydrophobicity of the axial ligand side chains. Therefore, hydrophobicity is the dominant factor in tuning the reduction potentials of blue copper centers by axial ligands.

Spectroscopic characterization of the Leu513His variant of fungal laccase: effect of increased axial ligand interaction on the geometric and electronic structure of the type 1 Cu site

A variety of spectroscopic techniques, combined with density functional calculations, are used to describe the electronic structure of the Leu513His variant of the type 1 Cu site in Myceliophthora thermophila laccase. This mutation changes the type 1 Cu from a blue to a green site. Electron paramagnetic resonance (EPR), optical absorption, circular dichroism, and magnetic circular dichroism (MCD) spectroscopies reveal that, relative to the trigonal planar blue type 1 Cu site in wild-type fungal laccase, the covalency and the ligand field strength at the Leu513His green type 1 Cu center decrease. Additionally, there is a significant reorientation of the d(x)()()2(-)(y)()()2( )singly occupied MO, such that the overlap with the Cys sulfur valence orbital changes from pi to sigma. A density functional study in which internal coordinates are systematically altered reveals that these changes are due to the increased strength of the axial ligand (none to His), leading to a tetragonal distortion and elongation of the equatorial Cu-ligand bonds. These calculations provide insight into the experimental differences in the EPR parameters, charge-transfer absorption spectrum, and ligand-field MCD spectrum between the axial-His variant and blue Cu centers (plastocyanin and the type 1 site in fungal laccase). There are also significant differences between the green site in the Leu513His variant and other naturally occurring, green type 1 Cu sites such as in nitrite reductase, which have short axial Cu-S(Met) bonds. The large difference in EPR parameters between these green type 1 sites derives from a change in ligand field excitation energies observed by MCD, which reflects a decrease in ligand field strength. This is associated with different steric interactions of a His vs an axial Met ligand in a tetragonally distorted type 1 site. Changes in the electronic structure of the Cu site correlate with the difference in reactivity of the green His variant relative to blue wild-type fungal laccase.

The effect of copper/zinc replacement on the folding free energy of wild type and Cys3Ala/Cys26Ala azurin

The effect of copper/zinc metal ion replacement on the folding free energy of wild type (w.t.) and disulfide bridge depleted (C3A/C26A) azurin has been investigated by differential scanning calorimetry (DSC) and fluorescence techniques. The denaturation experiments have shown that, in both cases, the thermal transitions of the zinc derivative of azurins can be depicted in terms of the classical Lumry-Eyring model, N if U-->F, thus resembling the unfolding path of the two copper proteins. The thermally induced transition of Zn azurin, monitored by fluorescence occurs at lower temperature than the DSC scans indicating that a local conformational rearrangement of the Trp microenvironment, takes place before protein denaturation. For Zn C3A/C26A azurin, the two techniques reveal the same transition temperature. Comparison of the thermodynamic data shows that the presence of Zn in the active site stabilises the three-dimensional structure of azurin only when the disulfide bridge is present. Compared to the copper form of the protein, the unfolding temperature of Zn azurin has increased by 4 degrees C, while the unfolding free energy, deltaG, is 31 kJ/mol higher. Both enthalpic and entropic factors contribute to the observed DeltaG increase. However, the copper/zinc replacement has no effect on the unfolding free energy of C3A/C26A azurin. Taking Cu azurin w.t. as the reference state, for both Cu and Zn C3A/C26A azurin the unfolding free energy is decreased by about 28 kJ/mol, indicating that metal substitution is not able to compensate the destabilising effect induced by the disulfide bridge depletion. It is noteworthy that the thermal denaturation of the Zn derivative, which thermodynamically is the most stable form of azurin, is also characterized by the highest value of the activation energy, E(a), as derived from the kinetic stability analysis.

A new type 2 copper cysteinate azurin. Involvement of an engineered exposed cysteine in copper binding through internal rearrangement

The double mutant H117G/N42C azurin exhibits tetragonal type 2 copper site characteristics with Cys(42) as one of the copper ligands as concluded from spectroscopic evidence (UV-visible, EPR, and resonance Raman). Analysis of the kinetics of copper uptake by the apoprotein by means of stopped flow spectroscopy suggests that the solvent-exposed Cys(42) assists in binding the metal ion and carrying it over to the active site where it becomes coordinated by, among others, a second cysteine, Cys(112). A structure is proposed in which the loop from residue 36 to 47 has rearranged to form a tetragonal type 2 copper site with Cys(42) as one of the ligands. The process of copper uptake as observed for the double mutant may be relevant for a better understanding of the way copper chaperones accept and transfer metal ions in the living cell.

Studies on the metal binding sites in the catalytic domain of beta1,4-galactosyltransferase

The catalytic domain of bovine beta1,4-galactosyltransferase (beta4Gal-T1) has been shown to have two metal binding sites, each with a distinct binding affinity. Site I binds Mn(2+) with high affinity and does not bind Ca(2+), whereas site II binds a variety of metal ions, including Ca(2+). The catalytic region of beta4Gal-T1 has DXD motifs, associated with metal binding in glycosyltransferases, in two separate sequences: D(242)YDYNCFVFSDVD(254) (region I) and W(312)GWGGEDDD(320) (region II). Recently, the crystal structure of beta4Gal-T1 bound with UDP, Mn(2+), and alpha-lactalbumin was determined in our laboratory. It shows that in the primary metal binding site of beta4Gal-T1, the Mn(2+) ion, is coordinated to five ligands, two supplied by the phosphates of the sugar nucleotide and the other three by Asp254, His347, and Met344. The residue Asp254 in the D(252)VD(254) sequence in region I is the only residue that is coordinated to the Mn(2+) ion. Region II forms a loop structure and contains the E(317)DDD(320) sequence in which residues Asp318 and Asp319 are directly involved in GlcNAc binding. This study, using site-directed mutagenesis, kinetic, and binding affinity analysis, shows that Asp254 and His347 are strong metal ligands, whereas Met344, which coordinates less strongly, can be substituted by alanine or glutamine. Specifically, substitution of Met344 to Gln has a less severe effect on the catalysis driven by Co(2+). Glu317 and Asp320 mutants, when partially activated by Mn(2+) binding to the primary site, can be further activated by Co(2+) or inhibited by Ca(2+), an effect that is the opposite of what is observed with the wild-type enzyme.

An outer-sphere hydrogen-bond network constrains copper coordination in blue proteins

In azurins and other blue copper proteins with relatively low reduction potentials (E(0) [Cu(II)/Cu(I)]<400 mV vs. normal hydrogen electrode), the folded polypeptide framework constrains both copper(II) and copper(I) in such a way as to tune the reduction potentials to values that differ greatly from those for most copper complexes. Largely conserved networks of hydrogen bonds organize and lock the rest of the folded protein structure to a loop that contains three of the ligands to copper. Changes in hydrogen bonds that allow copper(I) to revert more closely to its preferred geometry [relative to the copper(II) geometry] accordingly lead to an increase in E(0). This paper reports mutations in the ligand loop of amicyanin from P. denitrificans that relax the constraints on ligation for copper(I) and significantly raise E(0) for these mutants (for example 415+/-4 mV) relative to that of the native amicyanin (265+/-4 mV). These mutations also shift the pK(a) of a ligand histidine to below 5 relative to 7.0 in the wild type.

The metal site as a template for the metalloprotein structure formation

Achieving a thorough explanation of the behavior of metal sites in the formation of native metalloprotein structures is an exciting challenge in the biochemistry of metallobiomacromolecules. This study presents a personal insight into the subject. It is proposed that a metal center and its exogenous ligand compose a template. A template may impose a clear stereochemical preference on the loose peptide chains, and organize them into natural stereospecificity via the metal-ligand interaction, a long-range and strong interaction. Therefore, the stable peptide conformation induced by the template effect surrounding a template polyhedron could be called a template-mediated structural motif (TMSM).

Non-hydrogen bond interactions involving the methionine sulfur atom

Of all the nonbonded interactions, hydrogen bond, because of its geometry involving polar atoms, is the most easily recognizable. Here we characterize two interactions involving the divalent sulfur of methionine (Met) residues that do not need any participation of proton. In one an oxygen atom of the main-chain carbonyl group or a carboxylate side chain is used. In another an aromatic atom interacting along the face of the ring is utilized. In these, the divalent sulfur behaves as an electrophile and the other electron-rich atom, a nucleophile. The stereochemistry of the interaction is such that the nucleophile tends to approach approximately along the extension of one of the covalent bonds to S. The nitrogen atom of histidine side chain is extensively used in these nonbonded contacts. There is no particular geometric pattern in the interaction of S with the edge of an aromatic ring, except when an N-H group in involved, which is found within 40 degrees from the perpendicular to the sulfide plane, thus defining the geometry of hydrogen bond interaction involving the sulfur atom. As most of the Met residues which partake in such stereospecific interactions are buried, these would be important for the stability of the protein core, and their incorporation in the binding site would be useful for molecular recognition and optimization of the site's affinity for partners (especially containing aromatic and heteroaromatic groups). Mutational studies aimed at replacing Met by other residues would benefit from the delineation of these interactions.

Deuterium isotope effect on the intramolecular electron transfer in Pseudomonas aeruginosa azurin

Intramolecular electron transfer in azurin in water and deuterium oxide has been studied over a broad temperature range. The kinetic deuterium isotope effect, k(H)/k(D), is smaller than unity (0.7 at 298 K), primarily caused by the different activation entropies in water (-56.5 J K(-1) mol(-1)) and in deuterium oxide (-35.7 J K(-1) mol(-1)). This difference suggests a role for distinct protein solvation in the two media, which is supported by the results of voltammetric measurements: the reduction potential (E(0')) of Cu(2+/+) at 298 K is 10 mV more positive in D(2)O than in H(2)O. The temperature dependence of E(0') is also different, yielding entropy changes of -57 J K(-1) mol(-1) in water and -84 J K(-1) mol(-1) in deuterium oxide. The driving force difference of 10 mV is in keeping with the kinetic isotope effect, but the contribution to DeltaS from the temperature dependence of E(0') is positive rather than negative. Isotope effects are, however, also inherent in the nuclear reorganization Gibbs free energy and in the tunneling factor for the electron transfer process. A slightly larger thermal protein expansion in H(2)O than in D(2)O (0.001 nm K(-1)) is sufficient both to account for the activation entropy difference and to compensate for the different temperature dependencies of E(0'). Thus, differences in driving force and thermal expansion appear as the most straightforward rationale for the observed isotope effect.

Major changes in copper coordination accompany reduction of peptidylglycine monooxygenase: implications for electron transfer and the catalytic mechanism

X-ray absorption spectroscopy has been used to probe the local coordination of the copper centers in the oxidized and reduced states of the peptidylglycine monooxygenase catalytic core (PHMcc) in both the resting and substrate-bound forms of the enzyme. The results indicate that reduction causes significant changes in coordination number and geometry of both Cu centers (CuH and CuM). The CuH center changes from 4- or 5-coordinate tetragonal to a 2-coordinate configuration, with one of the three histidine ligands becoming undetectable by EXAFS (suggesting that it has moved away from the CuH by at least 0.3 A). The CuM center changes from 4- or 5-coordinate tetragonal to a trigonal or tetrahedral configuration, with an estimated 0.3-0.5 A movement of the M314 S ligand. Reduction also leads to loss of coordinated water from both of the coppers. Substrate binding has little or no effect on the local environment of the Cu centers in either oxidation state. These findings bring into question whether direct electron transfer between CuH and CuM via a tunneling mechanism can be fast enough to support the observed catalytic rate, and suggest that some other mechanism for electron transfer, such as superoxide channeling, should be considered.

Role of ligand substitution on long-range electron transfer in azurins

Azurin contains two potential redox sites, a copper centre and, at the opposite end of the molecule, a cystine disulfide (RSSR). Intramolecular electron transfer between a pulse radiolytically produced RSSR- radical anion and the blue Cu(II) ion was studied in a series of azurins in which single-site mutations were introduced into the copper ligand sphere. In the Met121His mutant, the rate constant for intramolecular electron transfer is half that of the corresponding wild-type azurin. In the His46Gly and His117Gly mutants, a water molecule is co-ordinated to the copper ion when no external ligands are added. Both these mutants also exhibit slower intramolecular electron transfer than the corresponding wild-type azurin. However, for the His117Gly mutant in the presence of excess imidazole, an azurin-imidazole complex is formed and the intramolecular electron-transfer rate increases considerably, becoming threefold faster than that observed in the native protein. Activation parameters for all these electron-transfer processes were determined and combined with data from earlier studies on intramolecular electron transfer in wild-type and single-site-mutated azurins. A linear relationship between activation enthalpy and activation entropy was observed. These results are discussed in terms of reorganization energies, driving force and possible electron-transfer pathways.

Site-directed mutations in fungal laccase: effect on redox potential, activity and pH profile

A Myceliophthora thermophila laccase and a Rhizoctonia solani laccase were mutated on a pentapeptide segment believed to be near the type-1 Cu site. The mutation L513F in Myceliophthora laccase and the mutation L470F in Rhizoctonia laccase took place at a position corresponding to the type-1 Cu axial methionine (M517) ligand in Zucchini ascorbate oxidase. The triple mutations V509L,S510E,G511A in Myceliophthora laccase and L466V,E467S,A468G in Rhizoctonia laccase involved a sequence segment whose homologue in ascorbate oxidase is flanked by the M517 and a type-1 Cu-ligating histidine (H512). The single mutation did not yield significant changes in the enzymic properties (including any significant increase in the redox potential of the type-1 Cu). In contrast, the triple mutation resulted in several significant changes. In comparison with the wild type, the Rhizoctonia and Myceliophthora laccase triple mutants had a phenol-oxidase activity whose pH optimum shifted 1 unit lower and higher, respectively. Although the redox potentials were not significantly altered, the Km, kcat and fluoride inhibition of the laccases were greatly changed by the mutations. The observed effects are interpreted as possible mutation-induced structural perturbations on the molecular recognition between the reducing substrate and laccase and on the electron transfer from the substrate to the type-1 Cu centre.