Beta-gamma subunit interaction is required for catalysis by H(+)-ATPase (ATP synthase). Beta subunit amino acid replacements suppress a gamma subunit mutation having a long unrelated carboxyl terminus

Binding of phytopolyphenol piceatannol disrupts β/γ subunit interactions and rate-limiting step of steady-state rotational catalysis in Escherichia coli F1-ATPase

In observations of single molecule behavior under V(max) conditions with minimal load, the F(1) sector of the ATP synthase (F-ATPase) rotates through continuous cycles of catalytic dwells (∼0.2 ms) and 120° rotation steps (∼0.6 ms). We previously established that the rate-limiting transition step occurs during the catalytic dwell at the initiation of the 120° rotation. Here, we use the phytopolyphenol, piceatannol, which binds to a pocket formed by contributions from α and β stator subunits and the carboxyl-terminal region of the rotor γ subunit. Piceatannol did not interfere with the movement through the 120° rotation step, but caused increased duration of the catalytic dwell. The duration time of the intrinsic inhibited state of F(1) also became significantly longer with piceatannol. All of the beads rotated at a lower rate in the presence of saturating piceatannol, indicating that the inhibitor stays bound throughout the rotational catalytic cycle. The Arrhenius plot of the temperature dependence of the reciprocal of the duration of the catalytic dwell (catalytic rate) indicated significantly increased activation energy of the rate-limiting step to trigger the 120° rotation. The activation energy was further increased by combination of piceatannol and substitution of γ subunit Met(23) with Lys, indicating that the inhibitor and the β/γ interface mutation affect the same transition step, even though they perturb physically separated rotor-stator interactions.

Rotational catalysis in proton pumping ATPases: from E. coli F-ATPase to mammalian V-ATPase

We focus on the rotational catalysis of Escherichia coli F-ATPase (ATP synthase, F(O)F(1)). Using a probe with low viscous drag, we found stochastic fluctuation of the rotation rates, a flat energy pathway, and contribution of an inhibited state to the overall behavior of the enzyme. Mutational analyses revealed the importance of the interactions among β and γ subunits and the β subunit catalytic domain. We also discuss the V-ATPase, which has different physiological roles from the F-ATPase, but is structurally and mechanistically similar. We review the rotation, diversity of subunits, and the regulatory mechanism of reversible subunit dissociation/assembly of Saccharomyces cerevisiae and mammalian complexes. This article is part of a Special Issue entitled: 17th European Bioenergetics Conference (EBEC 2012).

Temperature dependence of single molecule rotation of the Escherichia coli ATP synthase F1 sector reveals the importance of gamma-beta subunit interactions in the catalytic dwell

The temperature-dependent rotation of F1-ATPase gamma subunit was observed in V(max) conditions at low viscous drag using a 60-nm gold bead (Nakanishi-Matsui, M., Kashiwagi, S., Hosokawa, H., Cipriano, D. J., Dunn, S. D., Wada, Y., and Futai, M. (2006) J. Biol. Chem. 281, 4126-4131). The Arrhenius slopes of the speed of the individual 120 degrees steps and reciprocal of the pause length between rotation steps were very similar, indicating a flat energy pathway followed by the rotationally coupled catalytic cycle. In contrast, the Arrhenius slope of the reciprocal pause length of the gammaM23K mutant F1 was significantly increased, whereas that of the rotation rate was similar to wild type. The effects of the rotor gammaM23K substitution and the counteracting effects of betaE381D mutation in the interacting stator subunits demonstrate that the rotor-stator interactions play critical roles in the utilization of stored elastic energy. The gammaM23K enzyme must overcome an abrupt activation energy barrier, forcing it onto a less favored pathway that results in uncoupling catalysis from rotation.

Mechanism of inhibition of bovine F1-ATPase by resveratrol and related polyphenols

The structures of F(1)-ATPase from bovine heart mitochondria inhibited with the dietary phytopolyphenol, resveratrol, and with the related polyphenols quercetin and piceatannol have been determined at 2.3-, 2.4- and 2.7-A resolution, respectively. The inhibitors bind to a common site in the inside surface of an annulus made from loops in the three alpha- and three beta-subunits beneath the "crown" of beta-strands in their N-terminal domains. This region of F(1)-ATPase forms a bearing to allow the rotation of the tip of the gamma-subunit inside the annulus during catalysis. The binding site is a hydrophobic pocket between the C-terminal tip of the gamma-subunit and the beta(TP) subunit, and the inhibitors are bound via H-bonds mostly to their hydroxyl moieties mediated by bound water molecules and by hydrophobic interactions. There are no equivalent sites between the gamma-subunit and either the beta(DP) or the beta(E) subunit. The inhibitors probably prevent both the synthetic and hydrolytic activities of the enzyme by blocking both senses of rotation of the gamma-subunit. The beneficial effects of dietary resveratrol may derive in part by preventing mitochondrial ATP synthesis in tumor cells, thereby inducing apoptosis.

Rotary F1-ATPase. Is the C-terminus of subunit gamma fixed or mobile?

F-ATP synthase synthesizes ATP at the expense of ion motive force by a rotary coupling mechanism. A central shaft, subunit gamma, functionally connects the ion-driven rotary motor, F(O), with the rotary chemical reactor, F(1). Using polarized spectrophotometry we have demonstrated previously the functional rotation of the C-terminal alpha-helical portion of gamma in the supposed 'hydrophobic bearing' formed by the (alpha beta)(3) hexagon. In apparent contradiction with these spectroscopic results, an engineered disulfide bridge between the alpha-helix of gamma and subunit alpha did not impair enzyme activity. Molecular dynamics simulations revealed the possibility of a 'functional unwinding' of the alpha-helix to form a swivel joint. Furthermore, they suggested a firm clamping of that part of gamma even without the engineered cross-link, i.e. in the wild-type enzyme. Here, we rechecked the rotational mobility of the C-terminal portion of gamma relative to (alpha beta)(3). Non-fluorescent, engineered F(1) (alpha P280C/gamma A285C) was oxidized to form a (nonfluorescent) alpha gamma heterodimer. In a second mutant, containing just the point mutation within alpha, all subunits were labelled with a fluorescent dye. Following disassembly and reassembly of the combined preparations and cystine reduction, the enzyme was exposed to ATP or 5'-adenylyl-imidodiphosphate (AMP-PNP). After reoxidation, we found fluorescent alpha gamma dimers in all cases in accordance with rotary motion of the entire gamma subunit under these conditions. Molecular dynamics simulations covering a time range of nanoseconds therefore do not necessarily account for motional freedom in microseconds. The rotation of gamma within hours is compatible with the spectroscopically detected blockade of rotation in the AMP-PNP-inhibited enzyme in the time-range of seconds.

Proton pumping ATPases and diverse inside-acidic compartments

Proton-translocating ATPases are essential cellular energy converters that transduce the chemical energy of ATP hydrolysis into transmembrane proton electrochemical potential differences. The structures, catalytic mechanism, and cellular functions of three major classes of ATPases including the F-type, V-type, and P-type ATPase are discussed in this review. Physiological roles of the acidic organelles and compartments contained are also discussed.

F1-ATPase, the C-terminal end of subunit gamma is not required for ATP hydrolysis-driven rotation

ATP hydrolysis by the isolated F(1)-ATPase drives the rotation of the central shaft, subunit gamma, which is located within a hexagon formed by subunits (alphabeta)(3). The C-terminal end of gamma forms an alpha-helix which properly fits into the "hydrophobic bearing" provided by loops of subunits alpha and beta. This "bearing" is expected to be essential for the rotary function. We checked the importance of this contact region by successive C-terminal deletions of 3, 6, 9, 12, 15, and 18 amino acid residues (Escherichia coli F(1)-ATPase). The ATP hydrolysis activity of a load-free ensemble of F(1) with 12 residues deleted decreased to 24% of the control. EF(1) with deletions of 15 or 18 residues was inactive, probably because it failed to assemble. The average torque generated by a single molecule of EF(1) when loaded by a fluorescent actin filament was, however, unaffected by deletions of up to 12 residues, as was their rotational behavior (all samples rotated during 60 +/- 19% of the observation time). Activation energy analysis with the ensemble revealed a moderate decrease from 54 kJ/mol for EF(1) (full-length gamma) to 34 kJ/mol for EF(1)(gamma-12). These observations imply that the intactness of the C terminus of subunit gamma provides structural stability and/or routing during assembly of the enzyme, but that it is not required for the rotary action under load, proper.

Biological nano motor, ATP synthase F(o)F(1): from catalysis to gammaepsilonc(10-12) subunit assembly rotation

Proton translocating ATPase (ATP synthase), a chemiosmotic enzyme, synthesizes ATP from ADP and phosphate coupling with the electrochemical ion gradient across the membrane. This enzyme has been studied extensively by combined genetic, biochemical and biophysical approaches. Such studies revealed a unique mechanism which transforms an electrochemical ion gradient into chemical energy through the rotation of a subunit assembly. Thus, this enzyme can be defined as a nano motor capable of coupling a chemical reaction and ion translocation, or more simply, as a protein complex carrying out rotational catalysis. In this article, we briefly discuss our recent work, emphasizing the rotation of subunit assembly (gammaepsilonc(10-12)) which is formed from peripheral and intrinsic membrane subunits.

Synthase (H(+) ATPase): coupling between catalysis, mechanical work, and proton translocation

Coupling with electrochemical proton gradient, ATP synthase (F(0)F(1)) synthesizes ATP from ADP and phosphate. Mutational studies on high-resolution structure have been useful in understanding this complicated membrane enzyme. We discuss mainly the mechanism of catalysis in the beta subunit of F(1) sector and roles of the gamma subunit in energy coupling. The gamma-subunit rotation during catalysis is also discussed.

Rotational coupling in the F0F1 ATP synthase

The F0F1 ATP synthase is a large multisubunit complex that couples translocation of protons down an electrochemical gradient to the synthesis of ATP. Recent advances in structural analyses have led to the demonstration that the enzyme utilizes a rotational catalytic mechanism. Kinetic and biochemical evidence is consistent with the expected equal participation of the three catalytic sites in the alpha 3 beta 3 hexamer, which operate in sequential, cooperative reaction pathways. The rotation of the core gamma subunit plays critical roles in establishing the conformation of the sites and the cooperative interactions. Mutational analyses have shown that the rotor subunits are responsible for coupling and in doing so transmit specific conformational information between transport and catalysis.

The gamma-subunit rotation and torque generation in F1-ATPase from wild-type or uncoupled mutant Escherichia coli

The rotation of the gamma-subunit has been included in the binding-change mechanism of ATP synthesis/hydrolysis by the proton ATP synthase (FOF1). The Escherichia coli ATP synthase was engineered for rotation studies such that its ATP hydrolysis and synthesis activity is similar to that of wild type. A fluorescently labeled actin filament connected to the gamma-subunit of the F1 sector rotated on addition of ATP. This progress enabled us to analyze the gammaM23K (the gamma-subunit Met-23 replaced by Lys) mutant, which is defective in energy coupling between catalysis and proton translocation. We found that the F1 sector produced essentially the same frictional torque, regardless of the mutation. These results suggest that the gammaM23K mutant is defective in the transformation of the mechanical work into proton translocation or vice versa.

Stability of the Escherichia coli ATP synthase F0F1 complex is dependent on interactions between gamma Gln-269 and the beta subunit loop beta Asp-301-beta Asp-305

The role of the conserved sequence motif 301DDLTDP306 in the F0F1 ATP synthase beta subunit was assessed by mutagenic analysis in the Escherichia coli enzyme. Mutations gave variable effects on F1 sector activity, stability, and membrane binding to the F0 sector. Upon solubilization, F1 sectors of the betaD302E and betaD305E mutants (betaAsp-302 and betaAsp-305 replaced by glutamate) dissociated into subunits, while mutants with other beta305 substitutions failed to assemble. Membrane ATPase activities of beta301 and 302 mutants were 20-70% of wild type. Replacements of the gamma subunit Gln-269 had similar effects. The membrane ATPase activities of the gammaQ269E or gammaQ269D mutants were significantly lower and their F1 sectors dissociated into subunits upon solubilization. These results suggest that the beta301-305 loop and the gamma subunit region around Gln-269 form a key region for the assembly of alpha3 beta3 gamma complex. These results are consistent with the X-ray crystallographic structure of bovine F1 (J. P. Abrahams, A. G. W. Leslie, R. Lutter, and J. E. Walker (1994) Nature 370, 621-628) where the beta301DDLTD305 loop directly interacts with gammaGln-269.

Reconstitution of F1-ATPase activity from Escherichia coli subunits alpha, beta and subunit gamma tagged with six histidine residues at the C-terminus

An engineered gamma subunit of Escherichia coli F1-ATPase with extra 14 and 20 amino acid residues at the N- and C-termini (His-tag gamma), respectively, was overproduced in E. coli and purified. Six histidines are included in the C-terminal extension. The reconstituted F1 containing alpha, beta, and His-tagged gamma exhibited sixty percent of the wild-type ATPase activity. The reconstituted alphabeta His-tag gamma complex was subjected to affinity chromatography with nickel-nitrilotriacetic acid (Ni-NTA) agarose resin. ATPase activity was eluted specifically with imidazole. These results implied that the tag sequence protruded to the surface of the complex and did not seriously impair the activity. The reconstituted alphabeta His-tag gamma complex, even after its binding to the resin, exhibited ATPase activity suggesting that the gamma subunit, when fixed to a solid phase, may rotate the alphabeta complex. This system may provide a new approach for analysis of the rotation mechanisms in F1-ATPase.

Intergenic suppression of the gammaM23K uncoupling mutation in F0F1 ATP synthase by betaGlu-381 substitutions: the role of the beta380DELSEED386 segment in energy coupling

We previously demonstrated that the Escherichia coli F0F1-ATP synthase mutation, gammaM23K, caused increased energy of interaction between gamma- and beta-subunits which was correlated to inefficient coupling between catalysis and transport [Al-Shawi, Ketchum and Nakamoto (1997) J. Biol. Chem. 272, 2300-2306]. Based on these results and the X-ray crystallographic structure of bovine F1-ATPase [Abrahams, Leslie, Lutter and Walker (1994) Nature (London) 370, 621-628] gammaM23K is believed to form an ionized hydrogen bond with betaGlu-381 in the conserved beta380DELSEED386 segment. In this report, we further test the role of gamma-beta-subunit interactions by introducing a series of substitutions for betaGlu-381 and gammaArg-242, the residue which forms a hydrogen bond with betaGlu-381 in the wild-type enzyme. betaE381A, D, and Q were able to restore efficient coupling when co-expressed with gammaM23K. All three mutations reversed the increased transition state thermodynamic parameters for steady state ATP hydrolysis caused by gammaM23K. betaE381K by itself caused inefficient coupling, but opposite from the effect of gammaM23K, the transition state thermodynamic parameters were lower than wild-type. These results suggest that the betaE381K mutation perturbs the gamma-beta-subunit interaction and the local conformation of the beta380DELSEED386 segment in a specific way that disrupts the communication of coupling information between transport and catalysis. betaE381A, L, K, and R, and gammaR242L and E mutations perturbed enzyme assembly and stability to varying degrees. These results provide functional evidence that the beta380DELSEED386 segment and its interactions with the gamma-subunit are involved in the mechanism of coupling.

Catalytic mechanism of F1-ATPase

The structure of the core catalytic unit of ATP synthase, alpha 3 beta 3 gamma, has been determined by X-ray crystallography, revealing a roughly symmetrical arrangement of alternating alpha and beta subunits around a central cavity in which helical portions of gamma are found. A low-resolution structural model of F0, based on electron spectroscopic imaging, locates subunit a and the two copies of subunit b outside of a subunit c oligomer. The structures of individual subunits epsilon and c (largely) have been solved by NMR spectroscopy, but the oligomeric structure of c is still unknown. The structures of subunits a and delta remain undefined, that of b has not yet been defined but biochemical evidence indicates a credible model. Subunits gamma, epsilon, b, and delta are at the interface between F1 and F0; gamma epsilon complex forms one element of the stalk, interacting with c at the base and alpha and beta at the top. The locations of b and delta are less clear. Elucidation of the structure F0, of the stalk, and of the entire F1F0 remains a challenging goal.

Energy coupling, turnover, and stability of the F0F1 ATP synthase are dependent on the energy of interaction between gamma and beta subunits

Replacement of the F0F1 ATP synthase gamma subunit Met-23 with Lys (gammaM23K) perturbs coupling efficiency between transport and catalysis (Shin, K., Nakamoto, R. K., Maeda, M., and Futai, M. (1992) J. Biol. Chem. 267, 20835-20839). We demonstrate here that the gammaM23K mutation causes altered interactions between subunits. Binding of delta or epsilon subunits stabilizes the alpha3beta3gamma complex, which becomes destabilized by the mutation. Significantly, the inhibition of F1 ATP hydrolysis by the epsilon subunit is no longer relieved when the gammaM23K mutant F1 is bound to F0. Steady state Arrhenius analysis reveals that the gammaM23K enzyme has increased activation energies for the catalytic transition state. These results suggest that the mutation causes the formation of additional bonds within the enzyme that must be broken in order to achieve the transition state. Based on the x-ray crystallographic structure of Abrahams et al. (Abrahams, J. P., Leslie, A. G. W., Lutter, R., and Walker, J. E. (1994) Nature 370, 621-628), the additional bond is likely due to gammaM23K forming an ionized hydrogen bond with one of the betaGlu-381 residues. Two second site mutations, gammaQ269R and gammaR242C, suppress the effects of gammaM23K and decrease activation energies for the gammaM23K enzyme. We conclude that gammaM23K is an added function mutation that increases the energy of interaction between gamma and beta subunits. The additional interaction perturbs transmission of conformational information such that epsilon inhibition of ATPase activity is not relieved and coupling efficiency is lowered.

The ATP synthase--a splendid molecular machine

An X-ray structure of the F1 portion of the mitochondrial ATP synthase shows asymmetry and differences in nucleotide binding of the catalytic beta subunits that support the binding change mechanism with an internal rotation of the gamma subunit. Other structural and mutational probes of the F1 and F0 portions of the ATP synthase are reviewed, together with kinetic and other evaluations of catalytic site occupancy and behavior during hydrolysis or synthesis of ATP. Subunit function as related to proton translocation and rotational catalysis is considered. Physical demonstrations of the gamma subunit rotation have been achieved. The findings have implications for other enzymatic catalyses.

Conformational transmission in ATP synthase during catalysis: search for large structural changes

Escherichia coli ATP synthase has eight subunits and functions through transmission of conformational changes between subunits. Defective mutation at beta Gly-149 was suppressed by the second mutations at the outer surface of the beta subunit, indicating that the defect by the first mutation was suppressed by the second mutation through long range conformation transmission. Extensive mutant/pseudorevertant studies revealed that beta/alpha and beta/gamma subunits interactions are important for the energy coupling between catalysis and H+ translocation. In addition, long range interaction between amino and carboxyl terminal regions of the gamma subunit has a critical role(s) for energy coupling. These results suggest that the dynamic conformation change and its transmission are essential for ATP synthase.

The energy transmission in ATP synthase: from the gamma-c rotor to the alpha 3 beta 3 oligomer fixed by OSCP-b stator via the beta DELSEED sequence

ATP synthase (F0F1) is driven by an electrochemical potential of H+ (delta microH+). F0F1 is composed of an ion-conducting portion (F0) and a catalytic portion (F1). The subunit composition of F1 is a alpha 3 beta 3 gamma delta epsilon. The active alpha 3 beta 3 oligomer, characterized by X-ray crystallography, has been obtained only from thermophilic F1 (TF1). We proposed in 1984 that ATP is released from the catalytic site (C site) by a conformational change induced by the beta DELSEED sequence via gamma delta epsilon-F0. In fact, cross-linking of beta DELSEED to gamma stopped the ATP-driven rotation of gamma in the center of alpha 3 beta 3. The torque of the rotation is estimated to be 420 pN x A from the delta microH+ and H(+)-current through F0F1. The angular velocity (omega) of gamma is the rate-limiting step, because delta microH+ increased the Vmax of H+ current through F0, but not the Km(ATP). The rotational unit of F0 (= ab2c10) is pi/5, while that in alpha 3 beta 3 is 2 pi/3. This difference is overcome by an analog-digital conversion via elasticity around beta DELSEED with a threshold to release ATP. The alpha beta distance at the C site is about 9.6 A (2,8-diN3-ATP), and tight Mg-ATP binding in alpha 3 beta 3 gamma was shown by ESR. The rotational relaxation of TF1 is too rapid (phi = 100 nsec), but the rate of AT(D)P-induced conformational change of alpha 3 beta 3 measured with a synchrotron is close to omega. The ATP bound between the P-loop and beta E188 is released by the shift of beta DELSEED from gamma RGL. Considering the viscosity resistance and inertia of the free rotor (gamma-c), there may be a stator containing OSCP (= delta of TF1) and F0-d to hold free rotation of alpha 3 beta 3.