The central aromatic residue in loop L2 of RecA interacts with DNA. Quenching of the fluorescence of a tryptophan reporter inserted in L2 upon binding to DNA

Modeling the Homologous Recombination Process: Methods, Successes and Challenges

Homologous recombination (HR) is a fundamental process common to all species. HR aims to faithfully repair DNA double strand breaks. HR involves the formation of nucleoprotein filaments on DNA single strands (ssDNA) resected from the break. The nucleoprotein filaments search for homologous regions in the genome and promote strand exchange with the ssDNA homologous region in an unbroken copy of the genome. HR has been the object of intensive studies for decades. Because multi-scale dynamics is a fundamental aspect of this process, studying HR is highly challenging, both experimentally and using computational approaches. Nevertheless, knowledge has built up over the years and has recently progressed at an accelerated pace, borne by increasingly focused investigations using new techniques such as single molecule approaches. Linking this knowledge to the atomic structure of the nucleoprotein filament systems and the succession of unstable, transient intermediate steps that takes place during the HR process remains a challenge; modeling retains a very strong role in bridging the gap between structures that are stable enough to be observed and in exploring transition paths between these structures. However, working on ever-changing long filament systems submitted to kinetic processes is full of pitfalls. This review presents the modeling tools that are used in such studies, their possibilities and limitations, and reviews the advances in the knowledge of the HR process that have been obtained through modeling. Notably, we will emphasize how cooperative behavior in the HR nucleoprotein filament enables modeling to produce reliable information.

TESOGENASE, An Engineered Nuclease Editor for Enhanced Targeted Genome Integration

Non-viral DNA donor template has been widely used for targeted genomic integration by homologous recombination (HR). This process has become more efficient with RNA guided endonuclease editor system such as CRISPR/Cas9. Circular single stranded DNA (cssDNA) has been harnessed previously as a g enome engineering c atalyst (GATALYST) for efficient and safe targeted gene knock-in. However, the engineering efficiency is bottlenecked by the nucleoplasm trafficking and genomic tethering of cssDNA donor, especially for extra-large transgene integration. Here we developed enGager, en hanced G ATALYST a ssociated g enome e ditor system by fusion of nucleus localization signal (NLS) peptide tagged Cas9 with various single stranded DNA binding protein modules through a GFP reporter Knock-in screening. The enGager system assembles an integrative genome integration machinery by forming tripartite complex for engineered nuclease editors, sgRNA and ssDNA donors, thereby facilitate the nucleus trafficking of DNA donors and increase their active local concentration at the targeted genomic site. When applied for genome integration with cssDNA donor templates to diverse genomic loci in various cell types, these enGagers outperform unfused editors. The enhancement of integration efficiency ranges from 1.5- to more than 6-fold, with the effect being more prominent for > 4Kb transgene knock-in in primary cells. We further demonstrated that enGager mediated enhancement for genome integration is ssDNA, but less dsDNA dependent. Using one of the mini-enGagers, we demonstrated large chimeric antigen receptor (CAR) transgene integration in primary T cells with exceptional efficiency and anti-tumor function. These tripartite e ditors with s sDNA o ptimized g enome en gineering system (TESOGENASE TM ) add a set of novel endonuclease editors into the gene-editing toolbox for potential cell and gene therapeutic development based on ssDNA mediated non-viral genome engineering.

Highlight

A reporter Knock-in screening establishes enGager system to identify TESOGENASE editor to improving ssDNA mediated genome integrationMini-TESOGENASEs developed by fusing Cas9 nuclease with novel ssDNA binding motifsmRNA mini-TESOGENASEs enhance targeted genome integration via various non-viral delivery approachesEfficient functional CAR-T cell engineering by mini-TESOGENASE.

Escherichia coli BW25113 Competent Cells Prepared Using a Simple Chemical Method Have Unmatched Transformation and Cloning Efficiencies

Escherichia coli recA⁻ strains are usually used for cloning to prevent insert instability via RecA-dependent recombination. Here, we report that E. coli BW25113 (recA⁺) competent cells prepared by using a previously reported transformation and storage solution (TSS) had 100-fold or higher transformation efficiency than the commonly used E. coli cloning strains, including XL1-Blue MRF’. The cloning success rates with E. coli BW25113 were 440 to 1,267-fold higher than those with E. coli XL1-Blue MRF’ when several inserts were assembled into four vectors by using a simple DNA assembly method. The difference was in part due to RecA, as the recA deletion in E. coli BW25113 reduced the transformation efficiency by 16 folds and cloning success rate by about 10 folds. However, the transformation efficiency and the cloning success rate of the recA deletion mutant of E. coli BW25113 are still 12- and >48-fold higher than those of E. coli XL1-Blue MRF’, which is a commonly used cloning strain. The cloned inserts with different lengths of homologous sequences were assembled into four vectors and transformed into E. coli BW25113, and they were stably maintained in BW25113. Thus, we recommend using E. coli BW25113 for efficient cloning and DNA assembly.

Mechanism of the formation of the RecA-ssDNA nucleoprotein filament structure: a coarse-grained approach

In prokaryotes, the RecA protein catalyzes the repair and strand exchange of double-stranded DNA. RecA binds to single-stranded DNA (ssDNA) and forms a presynaptic complex in which the protein polymerizes around the ssDNA to form a right-handed helical nucleoprotein filament structure. In the present work, the mechanism for the formation of the RecA-ssDNA filament structure is modeled using coarse-grained molecular dynamics simulations. Information from the X-ray structure was used to model the protein itself but not its interactions; the interactions between the protein and the ssDNA were modeled solely by electrostatic, aromatic, and repulsive energies. For the present study, the monomeric, dimeric, and trimeric units of RecA and 4, 8, and 11 NT-long ssDNA, respectively, were studied. Our results indicate that monomeric RecA is not sufficient for nucleoprotein filament formation; rather, dimeric RecA is the elementary binding unit, with higher multimeric units of RecA facilitating filament formation. Our results reveal that loop region flexibility at the primary binding site of RecA is essential for it to bind the incoming ssDNA, that the aromatic residues present in the loop region play an important role in ssDNA binding, and that ATP may play a role in guiding the ssDNA by changing the electrostatic potential of the RecA protein.

The Lon protease-like domain in the bacterial RecA paralog RadA is required for DNA binding and repair

Homologous recombination (HR) plays an essential role in the maintenance of genome integrity. RecA/Rad51 paralogs have been recognized as an important factor of HR. Among them, only one bacterial RecA/Rad51 paralog, RadA, is involved in HR as an accessory factor of RecA recombinase. RadA has a unique Lon protease-like domain (LonC) at its C terminus, in addition to a RecA-like ATPase domain. Unlike Lon protease, RadA's LonC domain does not show protease activity but is still essential for RadA-mediated DNA repair. Reconciling these two facts has been difficult because RadA's tertiary structure and molecular function are unknown. Here, we describe the hexameric ring structure of RadA's LonC domain, as determined by X-ray crystallography. The structure revealed the two positively charged regions unique to the LonC domain of RadA are located at the intersubunit cleft and the central hole of a hexameric ring. Surprisingly, a functional domain analysis demonstrated the LonC domain of RadA binds DNA, with site-directed mutagenesis showing that the two positively charged regions are critical for this DNA-binding activity. Interestingly, only the intersubunit cleft was required for the DNA-dependent stimulation of ATPase activity of RadA, and at least the central hole was essential for DNA repair function. Our data provide the structural and functional features of the LonC domain and their function in RadA-mediated DNA repair.

Integrating multi-scale data on homologous recombination into a new recognition mechanism based on simulations of the RecA-ssDNA/dsDNA structure

RecA protein is the prototypical recombinase. Members of the recombinase family can accurately repair double strand breaks in DNA. They also provide crucial links between pairs of sister chromatids in eukaryotic meiosis. A very broad outline of how these proteins align homologous sequences and promote DNA strand exchange has long been known, as are the crystal structures of the RecA-DNA pre- and postsynaptic complexes; however, little is known about the homology searching conformations and the details of how DNA in bacterial genomes is rapidly searched until homologous alignment is achieved. By integrating a physical model of recognition to new modeling work based on docking exploration and molecular dynamics simulation, we present a detailed structure/function model of homology recognition that reconciles extremely quick searching with the efficient and stringent formation of stable strand exchange products and which is consistent with a vast body of previously unexplained experimental results.

Analysis of DNA-binding sites on Mhr1, a yeast mitochondrial ATP-independent homologous pairing protein

The Mhr1 protein is necessary for mtDNA homologous recombination in Saccharomyces cerevisiae. Homologous pairing (HP) is an essential reaction during homologous recombination, and is generally catalyzed by the RecA/Rad51 family of proteins in an ATP-dependent manner. Mhr1 catalyzes HP through a mechanism similar, at the DNA level, to that of the RecA/Rad51 proteins, but without utilizing ATP. However, it has no sequence homology with the RecA/Rad51 family proteins or with other ATP-independent HP proteins, and exhibits different requirements for DNA topology. We are interested in the structural features of the functional domains of Mhr1. In this study, we employed the native fluorescence of Mhr1's Trp residues to examine the energy transfer from the Trp residues to etheno-modified ssDNA bound to Mhr1. Our results showed that two of the seven Trp residues (Trp71 and Trp165) are spatially close to the bound DNA. A systematic analysis of mutant Mhr1 proteins revealed that Asp69 is involved in Mg(2+)-dependent DNA binding, and that multiple Lys and Arg residues located around Trp71 and Trp165 are involved in the DNA-binding activity of Mhr1. In addition, in vivo complementation analyses showed that a region around Trp165 is important for the maintenance of mtDNA. On the basis of these results, we discuss the function of the region surrounding Trp165.

An approach to the construction of tailor-made amphiphilic peptides that strongly and selectively bind to hairpin RNA targets

The hairpin RNA motif is one of the most frequently observed secondary structures and is often targeted by therapeutic agents. An amphiphilic peptide with seven lysine and eight leucine residues and its derivatives were designed for use as ligands against RNA hairpin motifs. We hypothesized that variations in both the hydrophobic leucine-rich and hydrophilic lysine-rich spheres of these amphiphilic peptides would create extra attractive interactions with hairpin RNA targets. A series of alanine-scanned peptides were probed to identify the most influential lysine residues in the hydrophilic sphere. The binding affinities of these modified peptides with several hairpins, such as RRE, TAR from HIV, a short hairpin from IRES of HCV, and a hairpin from the 16S A-site stem from rRNA, were determined. Since the hairpin from IRES of HCV was the most susceptible to the initial series of alanine-scanned peptides, studies investigating how further variations in the peptides effect binding employed the IRES hairpin. Next, the important Lys residues were substituted by shorter chain amines, such as ornithine, to place the peptide deeper into the hairpin groove. In a few cases, a 70-fold improved binding was observed for peptides that contained the specifically located shorter amine side chains. To further explore changes in binding affinities brought about by alterations in the hydrophobic sphere, tryptophan residues were introduced in place of leucine. A few peptides with tryptophan in specific positions also displayed 70-fold improved binding affinities. Finally, double mutant peptides incorporating both specifically located shorter amine side chains in the hydrophilic region and tryptophan residues in the hydrophobic region were synthesized. The binding affinities of peptides containing the simple double modification were observed to be 80 times lower, and their binding specificities were increased 40-fold. The results of this effort provide important information about strategies that can be used to prepare peptides that both strongly and selectively target hairpin RNAs. Specifically, the findings indicate that tailor-made amphiphilic peptide ligands against certain hairpin RNAs can be obtained if the RNA target possesses a deep groove in which both the hydrophobic and hydrophilic spheres of the peptide interact.

Loop 2 in Saccharomyces cerevisiae Rad51 protein regulates filament formation and ATPase activity

Previous studies showed that the K342E substitution in the Saccharomyces cerevisiae Rad51 protein increases the interaction with Rad54 protein in the two-hybrid system, leads to increased sensitivity to the alkylating agent MMS and hyper-recombination in an oligonucleotide-mediated gene targeting assay. K342 localizes in loop 2, a region of Rad51 whose function is not well understood. Here, we show that Rad51-K342E displays DNA-independent and DNA-dependent ATPase activities, owing to its ability to form filaments in the absence of a DNA lattice. These filaments exhibit a compressed pitch of 81 Å, whereas filaments of wild-type Rad51 and Rad51-K342E on DNA form extended filaments with a 97 Å pitch. Rad51-K342E shows near normal binding to ssDNA, but displays a defect in dsDNA binding, resulting in less stable protein-dsDNA complexes. The mutant protein is capable of catalyzing the DNA strand exchange reaction and is insensitive to inhibition by the early addition of dsDNA. Wild-type Rad51 protein is inhibited under such conditions, because of its ability to bind dsDNA. No significant changes in the interaction between Rad51-K342E and Rad54 could be identified. These findings suggest that loop 2 contributes to the primary DNA-binding site in Rad51, controlling filament formation and ATPase activity.

Roles of the human Rad51 L1 and L2 loops in DNA binding

The human Rad51 protein, a eukaryotic ortholog of the bacterial RecA protein, is a key enzyme that functions in homologous recombination and recombinational repair of double strand breaks. The Rad51 protein contains two flexible loops, L1 and L2, which are proposed to be sites for DNA binding, based on a structural comparison with RecA. In the present study, we performed mutational and fluorescent spectroscopic analyses on the L1 and L2 loops to examine their role in DNA binding. Gel retardation and DNA-dependent ATP hydrolysis measurements revealed that the substitution of the tyrosine residue at position 232 (Tyr232) within the L1 loop with alanine, a short side chain amino acid, significantly decreased the DNA-binding ability of human Rad51, without affecting the protein folding or the salt-induced, DNA-independent ATP hydrolysis. Even the conservative replacement with tryptophan affected the DNA binding, indicating that Tyr232 is involved in DNA binding. The importance of the L1 loop was confirmed by the fluorescence change of a tryptophan residue, replacing the Asp231, Ser233, or Gly236 residue, upon DNA binding. The alanine replacement of phenylalanine at position 279 (Phe279) within the L2 loop did not affect the DNA-binding ability of human Rad51, unlike the Phe203 mutation of the RecA L2 loop. The Phe279 side chain may not be directly involved in the interaction with DNA. However, the fluorescence intensity of the tryptophan replacing the Rad51-Phe279 residue was strongly reduced upon DNA binding, indicating that the L2 loop is also close to the DNA-binding site.

Location of tyrosine 315, a target for phosphorylation by cAbl tyrosine kinase, at the edge of the subunit-subunit interface of the human Rad51 filament

Rad51 is a key element of recombinational DNA repair and its activity is regulated by phosphorylation of the tyrosine residue at position 315 by cAbl kinase. This phosphorylation could be involved in the resistance of cancer cells to chemotherapy. We have investigated the role of this residue by comparing the three-dimensional structures of human Rad51 and its prokaryotic homologue, Escherichia coli RecA. The residue appeared to be on the edge of the subunit-subunit interacting site. The fluorescence intensity of the tryptophan residue inserted at position 315 of human Rad51 in the place of tyrosine was decreased by adding 3 M urea, although the protein was not unfolded as there was no large change in the fluorescence peak position or circular dichroism signal. This change in fluorescence occurred at a lower urea concentration when the protein was diluted, which favours dissociation. These results indicate that the change is related to the dissociation of Rad51 polymer and that residue 315 is close to the subunit-subunit interacting site. ATP and ADP, which affect the filament structure, caused a blue shift in the fluorescence peak. These nucleotides probably altered the subunit-subunit contacts and may thus affect the filament structure. Phosphorylation of this residue could therefore affect the formation and structure of the Rad51 filament. Correct prediction of subunit-subunit interface of Rad51 by simple comparison of structures of Rad51 and RecA supports the idea that Rad51 forms the filament in a similar way as does RecA.

Direct evaluation of a mechanism for activation of the RecA nucleoprotein filament

The RecA protein of Escherichia coli controls the SOS response for DNA damage tolerance and plays a crucial role in recombinational DNA repair. The formation of a RecA.ATP.ssDNA complex initiates all RecA activities, and yet this process is not understood at the molecular level. An analysis of RecA.DNA interactions was performed using both a mutant RecA protein containing a tryptophan (Trp) reporter and oligodeoxyribonucleotides (ODNs) containing a fluorescent guanine analogue, 6-methylisoxanthopterin (6MI). Experiments using fluorescent ODNs allowed structurally distinct nucleoprotein filaments, formed in the absence and presence of ATPgammaS (a slowly hydrolyzed analogue of ATP), to be differentiated directly. Stopped-flow spectrofluorometry, combined with presteady-state kinetic analyses, revealed unexpected differences in the rates of RecA.ODN and RecA.ATPgammaS.ODN complex assembly. This is the first demonstration that such intrinsically fluorescent synthetic DNAs can be used to characterize definitively the real-time assembly and activation of RecA.ssDNA complexes. Surprisingly, the ssDNA binding event is almost 50-fold slower in the presence of the activating ATPgammaS cofactor. Furthermore, a combination of time-dependent emission changes from 6MI and Trp allowed the first direct chemical test of whether an inactive filament can isomerize to the active state. The results revealed that, unlike the hexameric motor proteins, the inactive RecA filament cannot directly convert to the active state upon ATPgammaS binding. These results have implications for understanding how a coincidence of functions--an ATP-communicated signal-like activity and an ATP-driven motorlike activity--are resolved within a single protein molecule.

Identification of the subunit-subunit interface of Xenopus Rad51.1 protein: similarity to RecA

Rad51, like its prokaryotic homolog RecA, forms a helical filament for homologous DNA recombination and recombinational DNA repair. Comparison of the three-dimensional structures of human Rad51 and Escherichia coli RecA indicated that the tyrosine residue at position 191 in human Rad51 lies at the centre of a putative subunit-subunit contact interface. We inserted a tryptophan residue as a fluorescent probe at the corresponding position in Xenopus Rad51.1 and found that its fluorescence depended upon the protein concentration, indicating that the residue is truly in the subunit-subunit interface. We also found that 3 M urea, which promoted the dissociation of Rad51 filament without complete unfolding of the protein, exposed the tryptophan residue to solvent. The fluorescence was not modified by binding to DNA and only slightly modified by ATP, indicating that the same site is used for formation of the active ATP-Rad51-DNA filament. The slight changes in fluorescence caused by ATP and ADP suggest that the subunit-subunit contact is altered, leading to the elongation of the filament by these nucleotides, as with the RecA filament. Thus, Rad51 forms filaments by subunit-subunit contact much like RecA does.

Hyper-recombinogenic RecA protein from Pseudomonas aeruginosa with enhanced activity of its primary DNA binding site

According to one prominent model, each protomer in the activated nucleoprotein filament of homologous recombinase RecA possesses two DNA-binding sites. The primary site binds (1) single-stranded DNA (ssDNA) to form presynaptic complex and (2) the newly formed double-stranded (ds) DNA whereas the secondary site binds (1) dsDNA of a partner to initiate strand exchange and (2) the displaced ssDNA following the strand exchange. RecA protein from Pseudomonas aeruginosa (RecAPa) promotes in Escherichia coli hyper-recombination in an SOS-independent manner. Earlier we revealed that RecAPa rapidly displaces E.coli SSB protein (SSB-Ec) from ssDNA to form presynaptic complex. Here we show that this property (1) is based on increased affinity of ssDNA for the RecAPa primary DNA binding site while the affinity for the secondary site remains similar to that for E.coli RecA, (2) is not specific for SSB-Ec but is also observed for SSB protein from P.aeruginosa that, in turn, predicts a possibility of enhanced recombination repair in this pathogenic bacterium.

DNA recognition of a 24-mer peptide derived from RecA protein

A novel 24-residue peptide (L2-G), Ile-Arg-Met-Lys-Ile-Gly-Val-Met-Phe-Gly-Asn-Pro-Glu-Thr-Thr-Thr-Gly-Gly-Asn-Ala-Leu-Lys-Phe-Tyr, derived from RecA can discriminate a single-stranded DNA (ssDNA) from a double-stranded DNA (dsDNA) and a new developed support with this peptide recognizes not dsDNA but ssDNA. The 24-mer peptide with L2 and helix G amino acids of Escherichia coli RecA protein showed the ssDNA binding property with more than 1000 times affinity difference for the dsDNA. However, truncated 15-mer peptide showed no ssDNA binding activity. In the ssDNA binding, L2-G changed its conformation with the perturbation of an alpha-helix structure. The ssDNA binding and the DNA discrimination property of this peptide were due to almost all L2 and helix G amino acids, respectively. This result is useful to design synthetic peptides as functional materials for DNA recognition.

Design and evaluation of a tryptophanless RecA protein with wild type activity

The C-terminal domain of the Escherichia coli RecA protein contains two tryptophan residues whose native fluorescence emission provides an interfering background signal when other fluorophores such as 1,N(6)-ethenoadenine, 2-aminopurine and other tryptophan residues are used to probe the protein's activities. Replacement of the wild type tryptophans with nonfluorescent residues is not trivial because one tryptophan is highly conserved and the C-terminal domain functions in both DNA binding as well as interfilament protein-protein contact. We undertook the task of creating a tryptophanless RecA protein with WT RecA activity by selecting suitable amino acid replacements for Trp290 and Trp308. Mutant proteins were screened in vivo using assays of SOS induction and cell survival following UV irradiation. Based on its activity in these assays, the W290H-W308F W-less RecA was purified for in vitro characterization and functioned like WT RecA in DNA-dependent ATPase and DNA strand exchange assays. Spectrofluorometry indicates that the W290H-W308F RecA protein generates no significant emission when excited with 295-nm light. Based on its ability to function as wild type protein in vivo and in vitro, this dark RecA protein will be useful for future fluorescence experiments.

Interaction of tyrosine 65 of RecA protein with the first and second DNA strands

We investigated the structure of the active RecA-DNA complex by analyzing the environment of tyrosine residue 65, which is on the DNA-binding surface of the protein. We prepared a modified RecA protein in which the tyrosine residue was replaced by tryptophan, a natural fluorescent reporter, and measured the change in its fluorescence upon binding of DNA and cofactor. The fluorescence of the inserted tryptophan 65 (Trp65) was centered at 345 nm, indicating a partly exposed residue. Binding cofactor, adenosine 5'-O-3-thiotriphosphate (ATPgammaS), alone at a low salt concentration did not change the fluorescence of Trp65, confirming that the residue is not close to the nucleotide. In contrast, the binding of single-stranded DNA quenched the fluorescence of Trp65 in both the presence and absence of ATPgammaS. Trp65 fluorescence was also quenched upon binding a second DNA strand. The fluorescence change depended upon the presence and absence of ATPgammaS, reflecting the difference in the DNA binding. These results indicate that residue 65 is close to both the first and second DNA strands. The degree of quenching depended upon the base composition of DNA, suggesting that the residue 65 interacts with the DNA bases. Binding of DNA with ATPgammaS as well as binding of ATPgammaS alone at high salt concentration shifted the fluorescence emission peak from 345 to 330 nm, indicating a change from a polar to a non-polar environment. Therefore, the environment change around residue 65 would also be linked to a change in conformation and thus the activation of the protein.

The homologous pairing domain of RecA also mediates the allosteric regulation of DNA binding and ATP hydrolysis: a remarkable concentration of functional residues

Switching between the active (ATP and DNA bound) and inactive conformations of the homologous recombination RecA protein is regulated by ATP hydrolysis. First, we use the homologous pairing domain of RecA derived from its mobile loop L2 to show that the interaction of this random coil peptide with the gamma-phosphate of ATP results in a peptide beta-conformation similar to that previously shown to be induced by DNA binding. Next, we show that in the whole RecA protein two residues in this L2 domain, Gln194 and Arg196, are catalytic amino acid residues for ATP hydrolysis and functionally resemble the corresponding residues engaged in GTP hydrolysis by two distinct classes of G proteins. Finally, we show that the role of DNA and high salt in the stimulation of the ATPase of RecA is to stabilize this highly mobile region involved in hydrolysis. This is a role similar to that described for RGSs in the activation of the GTPase of heterotrimeric G proteins. Therefore, (i) a prototypical DNA-dependent ATPase and ATP-stimulated DNA-binding protein, RecA, and eukaryotic signaling proteins share common stereochemical regulatory mechanisms; and (ii) in a remarkable example of parsimony, loop L2 is a molecular switch that controls both ATP promoted DNA binding and pairing reactions and DNA stimulated ATP hydrolysis.

Human Rad51 amino acid residues required for Rad52 binding

The Rad51 protein, a homologue of the bacterial RecA protein, is an essential factor for both meiotic and mitotic recombination. The N-terminal domain of the human Rad51 protein (HsRad51) directly interacts with DNA. Based on a yeast two-hybrid analysis, it has been reported that the N-terminal region of the Saccharomyces cerevisiae Rad51 protein binds Rad52;S. cerevisiae Rad51 and Rad52 both activate the homologous pairing and strand exchange reactions. Here, we show that the HsRad51 N-terminal region, which corresponds to the Rad52-binding region of ScRad51, does not exhibit strong binding to the human Rad52 protein (HsRad52). To investigate its function, the C-terminal region of HsRad51 was randomly mutagenized. Although this region includes the two segments corresponding to the putative DNA-binding sites of RecA, all seven of the mutants did not decrease, but instead slightly increased, the DNA binding. In contrast, we found that some of these HsRad51 mutations significantly decreased the HsRad52 binding. Therefore, we conclude that these amino acid residues are required for the HsRad51.HsRad52 binding. HsRad52, as well as S. cerevisiae Rad52, promoted homologous pairing between ssDNA and dsDNA, and higher homologous pairing activity was observed in the presence of both HsRad51 and HsRad52 than with either HsRad51 or HsRad52 alone. The HsRad51 F259V mutation, which strongly impaired the HsRad52 binding, decreased the homologous pairing in the presence of both HsRad51 and HsRad52, without affecting the homologous pairing by HsRad51 alone. This result suggests the importance of the HsRad51.HsRad52 interaction in homologous pairing.

The mutant RecA proteins, RecAR243Q and RecAK245N, exhibit defective DNA binding in homologous pairing

In homologous pairing, the RecA protein sequentially binds to single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), aligning the two DNA molecules within the helical nucleoprotein filament. To identify the DNA binding region, which stretches from the outside to the inside of the filament, we constructed two mutant RecA proteins, RecAR243Q and RecAK245N, with the amino acid substitutions of Arg243 to Gln and Lys245 to Asn, respectively. These amino acids are exposed to the solvent in the crystal structure of the RecA protein and are located in the central domain, which is believed to be the catalytic center of the homologous pairing activity. The mutations of Arg243 to Gln (RecAR243Q) and Lys245 to Asn (RecAK245N) impair the repair of UV-damaged DNA in vivo and cause defective homologous pairing of ssDNA and dsDNA in vitro. Although RecAR243Q is only slightly defective and RecAK245N is completely proficient in ssDNA binding to form the presynaptic filament, both mutant RecA proteins are defective in the formation of the three-component complex including ssDNA, dsDNA, and RecA protein. The ability to form dsDNA from complementary single strands is also defective in both RecAR243Q and RecAK245N. These results suggest that the region including Arg243 and Lys245 may be involved in the path of secondary DNA binding to the presynaptic filament.

Saturation mutagenesis of the E. coli RecA loop L2 homologous DNA pairing region reveals residues essential for recombination and recombinational repair

The disordered mobile loop L2 of the Escherichia coli RecA protein is known to play a central role in DNA binding and pairing. To investigate the local chemical environment in relation to function we performed saturation mutagenesis of the loop L2 region (amino acid positions 193-212) using a site-directed mutagenesis procedure, and determined the recombinational proficiency of the 380 mutants using genetic assays for homologous recombination and recombinational repair. Residues Asn193, Gln194, Arg196, Glu207, Thr209, Gly211, and Gly212 were identified as stringently required for recombinational events in bacterial cells. In addition, our findings suggest the involvement of loop L2 in the ATPase activity of RecA, and a role for residues Gln194, Arg196, Lys198 and Thr209 in the DNA-dependent hydrolysis of ATP. Finally, since 20 residue peptides that comprise this region can pair homologous DNAs by forming filamentous beta-structures, we propose how the information from the mutant analysis might facilitate the use of a simplified amino acid alphabet to design beta-structure forming L2 peptides with improved RecA-like activities.

The L2 loop peptide of RecA stiffens and restricts base motions of single-stranded DNA similar to the intact protein

The L2 loop in the RecA protein is the catalytic center for DNA strand exchange. Here we investigate the DNA binding properties of the L2 loop peptide using optical spectroscopy with polarized light. Both fluorescence intensity and anisotropy of an etheno-modified poly(dA) increase upon peptide binding, indicate that the base motions of single-stranded DNA are restricted in the complex. In agreement with this conclusion, the peptide-poly(dT) complex exhibits a significant linear dichroism signal. The peptide is also found to modify the structure of double-stranded DNA, but does not denature it. It is inferred that strand separation may not be required for the formation of a joint molecule.

Probing of DNA-binding sites of Escherichia coli RecA protein utilizing 1-anilinonaphthalene-8-sulfonic acid

RecA protein of Escherichia coli plays an essential role in homologous recombination of DNA strands. To analyze the interaction of RecA with single-stranded DNA (ssDNA), we performed a fluorescence competition assay employing 1-anilinonaphthalene-8-sulfonic acid (ANS) as an extrinsic fluorescent probe. ANS bound to RecA at three sites, leading to enhancement of ANS fluorescence. Addition of synthetic polynucleotides to the RecA-ANS complex in the absence of a nucleotide quenched the ANS fluorescence, indicating displacement of ANS molecules by ssDNA. Less effective quenching by poly(dA) suggests that the nucleoprotein filament on poly(dA) may differ from those on poly(dT) and poly(dC). A titration experiment with poly(dT) and poly(dA) showed clear stoichiometric binding of 3.5 nucleotides per protein. The site size for poly(dC) was 7.0, which could be explained by the formation of a double helix of poly(dC). ATP and other nucleotides also displaced the ANS. To identify ANS-binding sites, ANS was incorporated into RecA by UV irradiation, and fluorescent peptides were isolated from the proteolytic digest. Sequence analysis suggested that ANS binds to or near the ATP-binding region. These results suggest that the fluorescence quenching and photoincorporation assay using ANS may be useful for the analysis of the interaction of a protein and its ligand.

Homologous DNA pairing domain peptides of RecA protein: intrinsic propensity to form beta-structures and filaments

The 20 amino acid residue peptides derived from RecA loop L2 have been shown to be the pairing domain of RecA. The peptides bind to ss- and dsDNA, unstack ssDNA, and pair the ssDNA to its homologous target in a duplex DNA. As shown by circular dichroism, upon binding to DNA the disordered peptides adopt a beta-structure conformation. Here we show that the conformational change of the peptide from random coil to beta-structure is important in binding ss- and dsDNA. The beta-structure in the DNA pairing peptides can be induced by many environmental conditions such as high pH, high concentration, and non-micellar sodium dodecyl sulfate (6 mM). This behavior indicates an intrinsic property of these peptides to form a beta-structure. A beta-structure model for the loop L2 of RecA protein when bound to DNA is thus proposed. The fact that aromatic residues at the central position 203 strongly modulate the peptide binding to DNA and subsequent biochemical activities can be accounted for by the direct effect of the aromatic amino acids on the peptide conformational change. The DNA-pairing domain of RecA visualized by electron microscopy self-assembles into a filamentous structure like RecA. The relevance of such a peptide filamentous structure to the structure of RecA when bound to DNA is discussed.

Local folding of the N-terminal domain of Escherichia coli RecA controls protein-protein interaction

To obtain structural information about the self-association of the protein RecA, we studied urea denaturation of RecA by circular dichroism spectroscopy and gel filtration. Gel filtration analysis showed that urea at low concentrations, 1.0-1.2 M, dissociated the RecA oligomer to almost a monomeric state prior to the unfolding of each molecule. Upon treatment with 1.0 M urea, the circular dichroism spectrum showed a decrease in the alpha-helical content of RecA. A similar decrease was observed in the absence of urea for RecA at an extremely low protein concentration; the RecA oligomer dissociated to an almost completely monomeric state. The properties of RecA at low urea concentrations were similar to those of a truncated RecA lacking the first 33 N-terminal residues (Delta33RecA). Addition of a synthetic peptide corresponding to the 33 N-terminal residues to Delta33RecA increased the alpha-helical content. These results suggest that local folding of the N-terminal domain is coupled to protein-protein interactions of monomeric RecA, which are involved in the regulation of filament formation. The dissociation constant for interaction between RecA monomers was determined from the ellipticity data to be 0.1 microM.

Statistical modeling, phylogenetic analysis and structure prediction of a protein splicing domain common to inteins and hedgehog proteins

Inteins, introns spliced at the protein level, and the hedgehog family of proteins involved in eucaryotic development both undergo autocatalytic proteolysis. Here, a specific and sensitive hidden Markov model (HMM) of protein splicing domain shared by inteins and the hedgehog proteins has been trained and employed for further analysis. The HMM characterizes the common features of this domain including the position where a site-specific DNA endonuclease domain is inserted in the majority of the inteins. The HMM was used to identify several new putative inteins, such as that in the Methanococcus jannaschii klbA protein, and to generate a multiple sequence alignment of sequences possessing this domain. Phylogenetic analysis suggests that hedgehog proteins evolved from inteins. Secondary and tertiary structure predictions suggest that the domain has a structure similar to a beta-sandwich. Similarities between the serine protease cleavage mechanism and the protein splicing reaction mechanism are discussed. Examination of the locations of inteins indicates that they are not inserted randomly in an extein, but are often inserted at functionally important positions in the host proteins. A specific and sensitive HMM for a domain present in klbA proteins identified several additional bacterial and archaeal family members, and analysis of the site of insertion of the intein suggests residues that may be functionally important. This domain may play a role in formation of surface-associated protein complexes.

Locations of functional domains in the RecA protein. Overlap of domains and regulation of activities

We review the locations of various functional domains of the RecA protein of Escherichia coli, including how they have been assigned, and discuss the potential regulatory roles of spatial overlap between different domains. RecA is a multifunctional and ubiquitous protein involved both in general genetic recombination and in DNA repair: it regulates the synthesis and activity of DNA repair enzymes (SOS induction) and catalyses homologous recombination and mutagenesis. For these activities RecA interacts with a nucleotide cofactor, single-stranded and double-stranded DNAs, the LexA repressor, UmuD protein, the UmuD'2C complex as well as with RecA itself in forming the catalytically active nucleofilament. Attempts to locate the respective interaction sites have been advanced in order to understand the various functions of RecA. An intriguing question is how these numerous functional sites are contained within this rather small protein (38 kDa). To assess more clearly the roles of the respective sites and to what extent the sites may be interacting with each other, we review and compare the results obtained from various biological, biochemical and physico-chemical approaches. From a three-dimensional model it is concluded that all sites are concentrated to one part of the protein. As a consequence there are significant overlaps between the sites and it is speculated that corresponding interactions may play important roles in regulating RecA activities.

Roles of Tyr103 and Tyr264 in the regulation of RecA-DNA interactions by nucleotide cofactors

The DNA-binding mode of the RecA protein, in particular its dependence on nucleotide cofactor, has been investigated by monitoring the fluorescence and linear-dichroism signals of a tryptophan residue inserted in the RecA to replace tyrosine at position 103 or 264. These residues are important for cofactor and DNA binding, as evidenced from their fluorescence changes upon binding of cofactor and DNA [Morimatsu, K., Horii, T. & Takahashi, M. (1995) Eur. J. Biochem. 228, 779-785]. The substitution of these residues with tryptophan does not affect the structure or biological function of the complex and can therefore be exploited to gain structural information in terms of the orientation and environment of the inserted reporter chromophore. The fluorescence change upon formation of the ternary cofactor.RecA. DNA complex was much smaller than the sum of the changes induced by cofactor or DNA alone. This difference indicates that the cofactor and DNA interact with RecA via common components. The fluorescence change caused by DNA in the presence of cofactor was almost independent of the base composition of DNA, in contrast to the interaction in the absence of cofactor. Hence, the contact mode between the selected residues and DNA in the complex may depend significantly on the cofactor. Linear-dichroism measurements indicate that the cofactor does not markedly alter the organization of RecA filament. Linear dichroism shows that neither the aromatic moiety of residue 103 nor that of residue 264 is intercalated between the DNA bases. The textural changes reported for the helical pitch and contour length of RecA fiber upon interaction with cofactor and DNA may derive from a subtle change in orientation of the RecA subunits in the filament.

Homologous DNA pairing promoted by a 20-amino acid peptide derived from RecA

The molecular structure of the Escherichia coli RecA protein in the absence of DNA revealed two disordered or mobile loops that were proposed to be DNA binding sites. A short peptide spanning one of these loops was shown to carry out the key reaction mediated by the whole RecA protein: pairing (targeting) of a single-stranded DNA to its homologous site on a duplex DNA. In the course of the reaction the peptide bound to both substrate DNAs, unstacked the single-stranded DNA, and assumed a beta structure. These events probably recapitulate the underlying molecular pathway or mechanism used by homologous recombination proteins.