A possible role of the C-terminal domain of the RecA protein. A gateway model for double-stranded DNA binding

Homology recognition without double-stranded DNA-strand separation in D-loop formation by RecA

RecA protein and RecA/Rad51 orthologues are required for homologous recombination and DNA repair in all living creatures. RecA/Rad51 catalyzes formation of the D-loop, an obligatory recombination intermediate, through an ATP-dependent reaction consisting of two phases: homology recognition between double-stranded (ds)DNA and single-stranded (ss)DNA to form a hybrid-duplex core of 6-8 base pairs and subsequent hybrid-duplex/D-loop processing. How dsDNA recognizes homologous ssDNA is controversial. The aromatic residue at the tip of the β-hairpin loop (L2) was shown to stabilize dsDNA-strand separation. We tested a model in which dsDNA strands were separated by the aromatic residue before homology recognition and found that the aromatic residue was not essential to homology recognition, but was required for D-loop processing. Contrary to the model, we found that the double helix was not unwound even a single turn during search for sequence homology, but rather was unwound only after the homologous sequence was recognized. These results suggest that dsDNA recognizes its homologous ssDNA before strand separation. The search for homologous sequence with homologous ssDNA without dsDNA-strand separation does not generate stress within the dsDNA; this would be an advantage for dsDNA to express homology-dependent functions in vivo and also in vitro.

Modeling the Homologous Recombination Process: Methods, Successes and Challenges

Homologous recombination (HR) is a fundamental process common to all species. HR aims to faithfully repair DNA double strand breaks. HR involves the formation of nucleoprotein filaments on DNA single strands (ssDNA) resected from the break. The nucleoprotein filaments search for homologous regions in the genome and promote strand exchange with the ssDNA homologous region in an unbroken copy of the genome. HR has been the object of intensive studies for decades. Because multi-scale dynamics is a fundamental aspect of this process, studying HR is highly challenging, both experimentally and using computational approaches. Nevertheless, knowledge has built up over the years and has recently progressed at an accelerated pace, borne by increasingly focused investigations using new techniques such as single molecule approaches. Linking this knowledge to the atomic structure of the nucleoprotein filament systems and the succession of unstable, transient intermediate steps that takes place during the HR process remains a challenge; modeling retains a very strong role in bridging the gap between structures that are stable enough to be observed and in exploring transition paths between these structures. However, working on ever-changing long filament systems submitted to kinetic processes is full of pitfalls. This review presents the modeling tools that are used in such studies, their possibilities and limitations, and reviews the advances in the knowledge of the HR process that have been obtained through modeling. Notably, we will emphasize how cooperative behavior in the HR nucleoprotein filament enables modeling to produce reliable information.

When Order Meets Disorder: Modeling and Function of the Protein Interface in Fuzzy Complexes

The degree of proteins structural organization ranges from highly structured, compact folding to intrinsic disorder, where each degree of self-organization corresponds to specific functions: well-organized structural motifs in enzymes offer a proper environment for precisely positioned functional groups to participate in catalytic reactions; at the other end of the self-organization spectrum, intrinsically disordered proteins act as binding hubs via the formation of multiple, transient and often non-specific interactions. This review focusses on cases where structurally organized proteins or domains associate with highly disordered protein chains, leading to the formation of interfaces with varying degrees of fuzziness. We present a review of the computational methods developed to provide us with information on such fuzzy interfaces, and how they integrate experimental information. The discussion focusses on two specific cases, microtubules and homologous recombination nucleoprotein filaments, where a network of intrinsically disordered tails exerts regulatory function in recruiting partner macromolecules, proteins or DNA and tuning the atomic level association. Notably, we show how computational approaches such as molecular dynamics simulations can bring new knowledge to help bridging the gap between experimental analysis, that mostly concerns ensemble properties, and the behavior of individual disordered protein chains that contribute to regulation functions.

The regulation mechanism of the C-terminus of RecA proteins during DNA strand-exchange process

The C-terminus of Escherichia coli RecA protein can affect the DNA binding affinity, interact with accessory proteins, and regulate the RecA activity. A substantial upward shift in the pH-reaction profile of RecA-mediated DNA strand-exchange reactions was observed for C-terminal-truncated E. coli ΔC17 RecA, Deinococcus radiodurans RecA, and Deinococcus ficus RecA. Here, the process of RecA-mediated strand exchange from the beginning to the end was investigated with florescence resonance energy transfer and tethered particle motion experiments to determine the detailed regulation mechanism. RecA proteins with a shorter C-terminus possess more stable nuclei, higher DNA binding affinities, and lower protonation requirements for the formation of nucleoprotein filaments. Moreover, more stable synaptic complexes in the homologous sequence searching process were also observed for RecA proteins with a shorter C-terminus. Our results suggest that the C-terminus of RecA proteins regulates not only the formation of RecA nucleoprotein filaments but also the entrance of secondary DNA into RecA nucleoprotein filaments.

Mechanism of strand exchange from RecA-DNA synaptic and D-loop structures

The strand exchange reaction is central to homologous recombination. It is catalyzed by the RecA family of ATPases that form a helical filament with single-stranded DNA (ssDNA) and ATP. This filament binds to a donor double-stranded DNA (dsDNA) to form synaptic filaments that search for homology, and then catalyze the exchange of the complementary strand to form a new heteroduplex, or a D-loop if homology is limited^1,2. Here we report the Cryo-EM analysis of synaptic mini filaments with both non-complementary and partially-complementary dsDNA, and structures of RecA–D-loop complexes containing a 10 or 12 base pair heteroduplex at 2.8 and 2.9 Å, respectively. The RecA C-terminal domain (CTD) binds to dsDNA and directs it to the L2 loop, which inserts into and opens the duplex. The opening propagates through RecA sequestering the homologous strand at a secondary DNA-binding site, freeing the complementary strand to sample pairing with the ssDNA. Duplex opening has a significant probability of stopping at each RecA step, with the as yet unopened dsDNA portion binding to another CTD. Homology suppresses this process through heteroduplex pairing cooperating with secondary site-ssDNA binding to extend dsDNA opening. This mechanism locally limits the length of ssDNA sampled for pairing if homology is not encountered, and it may provide for the formation of multiple synapses separated substantially on the donor dsDNA, increasing the probability of encountering homology.

An Epistasis Analysis of recA and recN in Escherichia coli K-12

RecA is essential for double-strand-break repair (DSBR) and the SOS response in Escherichia coli K-12. RecN is an SOS protein and a member of the Structural Maintenance of Chromosomes family of proteins thought to play a role in sister chromatid cohesion/interactions during DSBR. Previous studies have shown that a plasmid-encoded recA4190 (Q300R) mutant had a phenotype similar to ∆recN (mitomycin C sensitive and UV resistant). It was hypothesized that RecN and RecA physically interact, and that recA4190 specifically eliminated this interaction. To test this model, an epistasis analysis between recA4190 and ∆recN was performed in wild-type and recBC sbcBC cells. To do this, recA4190 was first transferred to the chromosome. As single mutants, recA4190 and ∆recN were Rec+ as measured by transductional recombination, but were 3-fold and 10-fold decreased in their ability to do I-SceI-induced DSBR, respectively. In both cases, the double mutant had an additive phenotype relative to either single mutant. In the recBC sbcBC background, recA4190 and ∆recN cells were very UVS (sensitive), Rec-, had high basal levels of SOS expression and an altered distribution of RecA-GFP structures. In all cases, the double mutant had additive phenotypes. These data suggest that recA4190 (Q300R) and ∆recN remove functions in genetically distinct pathways important for DNA repair, and that RecA Q300 was not important for an interaction between RecN and RecA in vivorecA4190 (Q300R) revealed modest phenotypes in a wild-type background and dramatic phenotypes in a recBC sbcBC strain, reflecting greater stringency of RecA's role in that background.

RecA and DNA recombination: a review of molecular mechanisms

Recombinases are responsible for homologous recombination and maintenance of genome integrity. In Escherichia coli, the recombinase RecA forms a nucleoprotein filament with the ssDNA present at a DNA break and searches for a homologous dsDNA to use as a template for break repair. During the first step of this process, the ssDNA is bound to RecA and stretched into a Watson-Crick base-paired triplet conformation. The RecA nucleoprotein filament also contains ATP and Mg2+, two cofactors required for RecA activity. Then, the complex starts a homology search by interacting with and stretching dsDNA. Thanks to supercoiling, intersegment sampling and RecA clustering, a genome-wide homology search takes place at a relevant metabolic timescale. When a region of homology 8-20 base pairs in length is found and stabilized, DNA strand exchange proceeds, forming a heteroduplex complex that is resolved through a combination of DNA synthesis, ligation and resolution. RecA activities can take place without ATP hydrolysis, but this latter activity is necessary to improve and accelerate the process. Protein flexibility and monomer-monomer interactions are fundamental for RecA activity, which functions cooperatively. A structure/function relationship analysis suggests that the recombinogenic activity can be improved and that recombinases have an inherently large recombination potential. Understanding this relationship is essential for designing RecA derivatives with enhanced activity for biotechnology applications. For example, this protein is a major actor in the recombinase polymerase isothermal amplification (RPA) used in point-of-care diagnostics.

Weaving DNA strands: structural insight on ATP hydrolysis in RecA-induced homologous recombination

Homologous recombination is a fundamental process in all living organisms that allows the faithful repair of DNA double strand breaks, through the exchange of DNA strands between homologous regions of the genome. Results of three decades of investigation and recent fruitful observations have unveiled key elements of the reaction mechanism, which proceeds along nucleofilaments of recombinase proteins of the RecA family. Yet, one essential aspect of homologous recombination has largely been overlooked when deciphering the mechanism: while ATP is hydrolyzed in large quantity during the process, how exactly hydrolysis influences the DNA strand exchange reaction at the structural level remains to be elucidated. In this study, we build on a previous geometrical approach that studied the RecA filament variability without bound DNA to examine the putative implication of ATP hydrolysis on the structure, position, and interactions of up to three DNA strands within the RecA nucleofilament. Simulation results on modeled intermediates in the ATP cycle bring important clues about how local distortions in the DNA strand geometries resulting from ATP hydrolysis can aid sequence recognition by promoting local melting of already formed DNA heteroduplex and transient reverse strand exchange in a weaving type of mechanism.

Nonfilament-forming RecA dimer catalyzes homologous joint formation

Homologous recombination is essential to genome maintenance, and also to genome diversification. In virtually all organisms, homologous recombination depends on the RecA/Rad51-family recombinases, which catalyze ATP-dependent formation of homologous joints—critical intermediates in homologous recombination. RecA/Rad51 binds first to single-stranded (ss) DNA at a damaged site to form a spiral nucleoprotein filament, after which double-stranded (ds) DNA interacts with the filament to search for sequence homology and to form consecutive base pairs with ssDNA (‘pairing’). How sequence homology is recognized and what exact role filament formation plays remain unknown. We addressed the question of whether filament formation is a prerequisite for homologous joint formation. To this end we constructed a nonpolymerizing (np) head-to-tail-fused RecA dimer (npRecA dimer) and an npRecA monomer. The npRecA dimer bound to ssDNA, but did not form continuous filaments upon binding to DNA; it formed beads-on-string structures exclusively. Although its efficiency was lower, the npRecA dimer catalyzed the formation of D-loops (a type of homologous joint), whereas the npRecA monomer was completely defective. Thus, filament formation contributes to efficiency, but is not essential to sequence-homology recognition and pairing, for which a head-to-tail dimer form of RecA protomer is required and sufficient.

Parallel triplex structure formed between stretched single-stranded DNA and homologous duplex DNA

The interaction between the single-stranded DNA and the homologous duplex DNA is essential for DNA homologous repair. Here, we report that parallel triplex structure can form spontaneously between a mechanically extended ssDNA and a homologous dsDNA in protein-free condition. The triplex has a contour length close to that of a B-form DNA duplex and remains stable after force is released. The binding energy between the ssDNA and the homologous dsDNA in the triplex is estimated to be comparable to the basepairing energy in a B-form dsDNA. As ssDNA is in a similar extended conformation within recombinase-coated nucleoprotein filaments, we propose that the parallel triplex may form and serve as an intermediate during recombinase-catalyzed homologous joint formation.

The Lon protease-like domain in the bacterial RecA paralog RadA is required for DNA binding and repair

Homologous recombination (HR) plays an essential role in the maintenance of genome integrity. RecA/Rad51 paralogs have been recognized as an important factor of HR. Among them, only one bacterial RecA/Rad51 paralog, RadA, is involved in HR as an accessory factor of RecA recombinase. RadA has a unique Lon protease-like domain (LonC) at its C terminus, in addition to a RecA-like ATPase domain. Unlike Lon protease, RadA's LonC domain does not show protease activity but is still essential for RadA-mediated DNA repair. Reconciling these two facts has been difficult because RadA's tertiary structure and molecular function are unknown. Here, we describe the hexameric ring structure of RadA's LonC domain, as determined by X-ray crystallography. The structure revealed the two positively charged regions unique to the LonC domain of RadA are located at the intersubunit cleft and the central hole of a hexameric ring. Surprisingly, a functional domain analysis demonstrated the LonC domain of RadA binds DNA, with site-directed mutagenesis showing that the two positively charged regions are critical for this DNA-binding activity. Interestingly, only the intersubunit cleft was required for the DNA-dependent stimulation of ATPase activity of RadA, and at least the central hole was essential for DNA repair function. Our data provide the structural and functional features of the LonC domain and their function in RadA-mediated DNA repair.

Integrating multi-scale data on homologous recombination into a new recognition mechanism based on simulations of the RecA-ssDNA/dsDNA structure

RecA protein is the prototypical recombinase. Members of the recombinase family can accurately repair double strand breaks in DNA. They also provide crucial links between pairs of sister chromatids in eukaryotic meiosis. A very broad outline of how these proteins align homologous sequences and promote DNA strand exchange has long been known, as are the crystal structures of the RecA-DNA pre- and postsynaptic complexes; however, little is known about the homology searching conformations and the details of how DNA in bacterial genomes is rapidly searched until homologous alignment is achieved. By integrating a physical model of recognition to new modeling work based on docking exploration and molecular dynamics simulation, we present a detailed structure/function model of homology recognition that reconciles extremely quick searching with the efficient and stringent formation of stable strand exchange products and which is consistent with a vast body of previously unexplained experimental results.

Loop L1 governs the DNA-binding specificity and order for RecA-catalyzed reactions in homologous recombination and DNA repair

In all organisms, RecA-family recombinases catalyze homologous joint formation in homologous genetic recombination, which is essential for genome stability and diversification. In homologous joint formation, ATP-bound RecA/Rad51-recombinases first bind single-stranded DNA at its primary site and then interact with double-stranded DNA at another site. The underlying reason and the regulatory mechanism for this conserved binding order remain unknown. A comparison of the loop L1 structures in a DNA-free RecA crystal that we originally determined and in the reported DNA-bound active RecA crystals suggested that the aspartate at position 161 in loop L1 in DNA-free RecA prevented double-stranded, but not single-stranded, DNA-binding to the primary site. This was confirmed by the effects of the Ala-replacement of Asp-161 (D161A), analyzed directly by gel-mobility shift assays and indirectly by DNA-dependent ATPase activity and SOS repressor cleavage. When RecA/Rad51-recombinases interact with double-stranded DNA before single-stranded DNA, homologous joint-formation is suppressed, likely by forming a dead-end product. We found that the D161A-replacement reduced this suppression, probably by allowing double-stranded DNA to bind preferentially and reversibly to the primary site. Thus, Asp-161 in the flexible loop L1 of wild-type RecA determines the preference for single-stranded DNA-binding to the primary site and regulates the DNA-binding order in RecA-catalyzed recombinase reactions.

Biochemical characterization of RecA variants that contribute to extreme resistance to ionizing radiation

Among strains of Escherichia coli that have evolved to survive extreme exposure to ionizing radiation, mutations in the recA gene are prominent and contribute substantially to the acquired phenotype. Changes at amino acid residue 276, D276A and D276N, occur repeatedly and in separate evolved populations. RecA D276A and RecA D276N exhibit unique adaptations to an environment that can require the repair of hundreds of double strand breaks. These two RecA protein variants (a) exhibit a faster rate of filament nucleation on DNA, as well as a slower extension under at least some conditions, leading potentially to a distribution of the protein among a higher number of shorter filaments, (b) promote DNA strand exchange more efficiently in the context of a shorter filament, and (c) are markedly less inhibited by ADP. These adaptations potentially allow RecA protein to address larger numbers of double strand DNA breaks in an environment where ADP concentrations are higher due to a compromised cellular metabolism.

Expression of Kin17 promotes the proliferation of hepatocellular carcinoma cells in vitro and in vivo

Kin17 protein is ubiquitously expressed in mammals and is correlated with vital biological functions. However, little is known about the role of Kin17 in the proliferation of hepatocellular carcinoma cells. The aim of the present study was to investigate whether the upregulation of Kin17 can promote the growth of hepatocellular carcinoma cells. A series of assays was performed to study the effect of Kin17 in the proliferation of hepatocellular carcinoma cells in vitro and in vivo. The western blotting results revealed that Kin17 expression was increased in hepatocellular carcinoma tissues compared with that of the corresponding normal tissues. Moreover, ectopic upregulation of Kin17 expression promoted the growth of hepatocellular carcinoma cells in vitro and in vivo. These results indicated that Kin17 is involved in the tumorigenesis of hepatocellular carcinoma, and that Kin17 has the potential to serve as a therapeutic target for hepatocellular carcinoma.

Real-time observation of strand exchange reaction with high spatiotemporal resolution

RecA binds to single-stranded (ss) DNA to form a helical filament that catalyzes strand exchange with a homologous double-stranded (ds) DNA. The study of strand exchange in ensemble assays is limited by the diffusion limited homology search process, which masks the subsequent strand exchange reaction. We developed a single-molecule fluorescence assay with a few base-pair and millisecond resolution that can separate initial docking from the subsequent propagation of joint molecule formation. Our data suggest that propagation occurs in 3 bp increments with destabilization of the incoming dsDNA and concomitant pairing with the reference ssDNA. Unexpectedly, we discovered the formation of a dynamic complex between RecA and the displaced DNA that remains bound transiently after joint molecule formation. This finding could have important implications for the irreversibility of strand exchange. Our model for strand exchange links structural models of RecA to its catalytic function.

Separation of recombination and SOS response in Escherichia coli RecA suggests LexA interaction sites

RecA plays a key role in homologous recombination, the induction of the DNA damage response through LexA cleavage and the activity of error-prone polymerase in Escherichia coli. RecA interacts with multiple partners to achieve this pleiotropic role, but the structural location and sequence determinants involved in these multiple interactions remain mostly unknown. Here, in a first application to prokaryotes, Evolutionary Trace (ET) analysis identifies clusters of evolutionarily important surface amino acids involved in RecA functions. Some of these clusters match the known ATP binding, DNA binding, and RecA-RecA homo-dimerization sites, but others are novel. Mutation analysis at these sites disrupted either recombination or LexA cleavage. This highlights distinct functional sites specific for recombination and DNA damage response induction. Finally, our analysis reveals a composite site for LexA binding and cleavage, which is formed only on the active RecA filament. These new sites can provide new drug targets to modulate one or more RecA functions, with the potential to address the problem of evolution of antibiotic resistance at its root.

In eubacteria, genome integrity is in large part orchestrated by RecA, which directly participates in recombination, induction of DNA damage response through LexA repressor cleavage and error-prone DNA synthesis. Yet, most of the interaction sites necessary for these vital processes are largely unknown. By comparing divergences among RecA sequences and computing putative functional regions, we discovered four functional sites of RecA. Targeted point-mutations were then tested for both recombination and DNA damage induction and reveal distinct RecA functions at each one of these sites. In particular, one new set of mutants is deficient in promoting LexA cleavage and yet maintains the ability to induce the DNA damage response. These results reveal specific amino acid determinants of the RecA–LexA interaction and suggest that LexA binds RecA_i and RecA_i+6 at a composite site on the RecA filament, which could explain the role of the active filament during LexA cleavage.

Halenaquinone, a chemical compound that specifically inhibits the secondary DNA binding of RAD51

Mutations and single-nucleotide polymorphisms affecting RAD51 gene function have been identified in several tumors, suggesting that the inappropriate expression of RAD51 activity may cause tumorigenesis. RAD51 is an essential enzyme for the homologous recombinational repair (HRR) of DNA double-strand breaks. In the HRR pathway, RAD51 catalyzes the homologous pairing between single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA), which is the central step of the HRR pathway. To identify a chemical compound that regulates the homologous-pairing activity of RAD51, in the present study, we screened crude extract fractions from marine sponges by the RAD51-mediated homologous-pairing assay. Halenaquinone was identified as an inhibitor of the RAD51 homologous-pairing activity. A surface plasmon resonance analysis indicated that halenaquinone directly bound to RAD51. Intriguingly, halenaquinone specifically inhibited dsDNA binding by RAD51 alone or the RAD51-ssDNA complex, but only weakly affected the RAD51-ssDNA binding. In vivo, halenaquinone significantly inhibited the retention of RAD51 at double-strand break sites. Therefore, halenaquinone is a novel type of RAD51 inhibitor that specifically inhibits the RAD51-dsDNA binding.

Binding selectivity of RecA to a single stranded DNA, a computational approach

Homologous recombination (HR) is the major DNA double strand break repair pathway which maintains the genomic integrity. It is fundamental for the survivability and functionality of all organisms. One of the initial steps in HR is the formation of the nucleoprotein filament composed by a single stranded DNA chain surrounded by the recombinases protein. The filament orchestrates the search for an undamaged homologue, as a template for the repair process. Our theoretical study was aimed at elucidating the selectivity of the interaction between a monomer of the recombinases enzyme in the Escherichia coli, EcRecA, the bacterial homologue of human Rad51, with a series of oligonucleotides of nine bases length. The complex, equilibrated for 20 ns with Langevian dynamics, was inserted in a periodic box with a 8 Å buffer of water molecules explicitly described by the TIP3P model. The absolute binding free energies are calculated in an implicit solvent using the Poisson-Boltzmann (PB) and the generalized Born (GB) solvent accessible surface area, using the MM-PB(GB)SA model. The solute entropic contribution is also calculated by normal mode analysis. The results underline how a significant contribution of the binding free energy is due to the interaction with the Arg196, a critical amino acid for the activity of the enzyme. The study revealed how the binding affinity of EcRecA is significantly higher toward dT₉ rather than dA₉, as expected from the experimental results.

Structure of the hDmc1-ssDNA filament reveals the principles of its architecture

In eukaryotes, meiotic recombination is a major source of genetic diversity, but its defects in humans lead to abnormalities such as Down's, Klinefelter's and other syndromes. Human Dmc1 (hDmc1), a RecA/Rad51 homologue, is a recombinase that plays a crucial role in faithful chromosome segregation during meiosis. The initial step of homologous recombination occurs when hDmc1 forms a filament on single-stranded (ss) DNA. However the structure of this presynaptic complex filament for hDmc1 remains unknown. To compare hDmc1-ssDNA complexes to those known for the RecA/Rad51 family we have obtained electron microscopy (EM) structures of hDmc1-ssDNA nucleoprotein filaments using single particle approach. The EM maps were analysed by docking crystal structures of Dmc1, Rad51, RadA, RecA and DNA. To fully characterise hDmc1-DNA complexes we have analysed their organisation in the presence of Ca2+, Mg2+, ATP, AMP-PNP, ssDNA and dsDNA. The 3D EM structures of the hDmc1-ssDNA filaments allowed us to elucidate the principles of their internal architecture. Similar to the RecA/Rad51 family, hDmc1 forms helical filaments on ssDNA in two states: extended (active) and compressed (inactive). However, in contrast to the RecA/Rad51 family, and the recently reported structure of hDmc1-double stranded (ds) DNA nucleoprotein filaments, the extended (active) state of the hDmc1 filament formed on ssDNA has nine protomers per helical turn, instead of the conventional six, resulting in one protomer covering two nucleotides instead of three. The control reconstruction of the hDmc1-dsDNA filament revealed 6.4 protein subunits per helical turn indicating that the filament organisation varies depending on the DNA templates. Our structural analysis has also revealed that the N-terminal domain of hDmc1 accomplishes its important role in complex formation through domain swapping between adjacent protomers, thus providing a mechanistic basis for coordinated action of hDmc1 protomers during meiotic recombination.

The N-terminal domain of Escherichia coli RecA have multiple functions in promoting homologous recombination

Escherichia coli RecA mediates homologous recombination, a process essential to maintaining genome integrity. In the presence of ATP, RecA proteins bind a single-stranded DNA (ssDNA) to form a RecA-ssDNA presynaptic nucleoprotein filament that captures donor double-stranded DNA (dsDNA), searches for homology, and then catalyzes the strand exchange between ssDNA and dsDNA to produce a new heteroduplex DNA. Based upon a recently reported crystal structure of the RecA-ssDNA nucleoprotein filament, we carried out structural and functional studies of the N-terminal domain (NTD) of the RecA protein. The RecA NTD was thought to be required for monomer-monomer interaction. Here we report that it has two other distinct roles in promoting homologous recombination. It first facilitates the formation of a RecA-ssDNA presynaptic nucleoprotein filament by converting ATP to an ADP-Pi intermediate. Then, once the RecA-ssDNA presynaptic nucleoprotein filament is stably assembled in the presence of ATPγS, the NTD is required to capture donor dsDNA. Our results also suggest that the second function of NTD may be similar to that of Arg243 and Lys245, which were implicated earlier as binding sites of donor dsDNA. A two-step model is proposed to explain how a RecA-ssDNA presynaptic nucleoprotein filament interacts with donor dsDNA.

Three new structures of left-handed RADA helical filaments: structural flexibility of N-terminal domain is critical for recombinase activity

RecA family proteins, including bacterial RecA, archaeal RadA, and eukaryotic Dmc1 and Rad51, mediate homologous recombination, a reaction essential for maintaining genome integrity. In the presence of ATP, these proteins bind a single-strand DNA to form a right-handed nucleoprotein filament, which catalyzes pairing and strand exchange with a homologous double-stranded DNA (dsDNA), by as-yet unknown mechanisms. We recently reported a structure of RadA left-handed helical filament, and here present three new structures of RadA left-handed helical filaments. Comparative structural analysis between different RadA/Rad51 helical filaments reveals that the N-terminal domain (NTD) of RadA/Rad51, implicated in dsDNA binding, is highly flexible. We identify a hinge region between NTD and polymerization motif as responsible for rigid body movement of NTD. Mutant analysis further confirms that structural flexibility of NTD is essential for RadA's recombinase activity. These results support our previous hypothesis that ATP-dependent axial rotation of RadA nucleoprotein helical filament promotes homologous recombination.

RecA family proteins in archaea: RadA and its cousins

Recombinases of the RecA family are essential for homologous recombination and underpin genome stability, by promoting the repair of double-stranded DNA breaks and the rescue of collapsed DNA replication forks. Until now, our understanding of homologous recombination has relied on studies of bacterial and eukaryotic model organisms. Archaea provide new opportunities to study how recombination operates in a lineage distinct from bacteria and eukaryotes. In the present paper, we focus on RadA, the archaeal RecA family recombinase, and its homologues in archaea and other domains. On the basis of phylogenetic analysis, we propose that a family of archaeal proteins with a single RecA domain, which are currently annotated as KaiC, be renamed aRadC.

The RAD51 gene family in bread wheat is highly conserved across eukaryotes, with RAD51A upregulated during early meiosis

The RADiation sensitive protein 51 (RAD51) recombinase is a eukaryotic homologue of the bacterial Recombinase A (RecA). It is required for homologous recombination of DNA during meiosis where it plays a role in processes such as homology searching and strand invasion. RAD51 is well conserved in eukaryotes with as many as four paralogues identified in vertebrates and some higher plants. Here we report the isolation and preliminary characterisation of four RAD51 gene family members in hexaploid (bread) wheat (Triticum aestivum L.). RAD51A1, RAD51A2 and RAD51D were located on chromosome group 7, and RAD51C was on chromosome group 2. Q-PCR gene expression profiling revealed that RAD51A1 was upregulated during meiosis with lower expression levels seen in mitotic tissue, and bioinformatics analysis demonstrated the evolutionary linkages of this gene family to other eukaryotic RAD51 sequences. Western blot analysis of heterologously expressed RAD51 from bread wheat has shown that it is detectable using anti-human RAD51 antibodies and that molecular modelling of the same protein revealed structural conservation when compared with yeast, human, Arabidopsis and maize RAD51A orthologues. This report has widened the knowledge base of this important protein family in plants, and highlighted the high level of structural conservation among RAD51 proteins from various species.

Molecular Design and Functional Organization of the RecA Protein

The bacterial RecA protein participates in a remarkably diverse set of functions, all of which are involved in the maintenance of genomic integrity. RecA is a central component in both the catalysis of recombinational DNA repair and the regulation of the cellular SOS response. Despite the mechanistic differences of its functions, all require formation of an active RecA/ATP/DNA complex. RecA is a classic allosterically regulated enzyme, and ATP binding results in a dramatic increase in DNA binding affinity and a cooperative assembly of RecA subunits to form an ordered, helical nucleoprotein filament. The molecular events that underlie this ATP-induced structural transition are becoming increasingly clear. This review focuses on descriptions of our current understanding of the molecular design and allosteric regulation of RecA. We present a comprehensive list of all published recA mutants and use the results of various genetic and biochemical studies, together with available structural information, to develop ideas regarding the design of RecA functional domains and their catalytic organization.

SSB as an organizer/mobilizer of genome maintenance complexes

When duplex DNA is altered in almost any way (replicated, recombined, or repaired), single strands of DNA are usually intermediates, and single-stranded DNA binding (SSB) proteins are present. These proteins have often been described as inert, protective DNA coatings. Continuing research is demonstrating a far more complex role of SSB that includes the organization and/or mobilization of all aspects of DNA metabolism. Escherichia coli SSB is now known to interact with at least 14 other proteins that include key components of the elaborate systems involved in every aspect of DNA metabolism. Most, if not all, of these interactions are mediated by the amphipathic C-terminus of SSB. In this review, we summarize the extent of the eubacterial SSB interaction network, describe the energetics of interactions with SSB, and highlight the roles of SSB in the process of recombination. Similar themes to those highlighted in this review are evident in all biological systems.

Snapshots of RecA protein involving movement of the C-domain and different conformations of the DNA-binding loops: crystallographic and comparative analysis of 11 structures of Mycobacterium smegmatis RecA

Mycobacterium smegmatis RecA and its nucleotide complexes crystallize in three different, but closely related, forms characterized by specific ranges of unit cell dimensions. The six crystals reported here and five reported earlier, all grown under the same or very similar conditions, belong to these three forms, all in space group P6(1). They include one obtained by reducing relative humidity around the crystal. In all crystals, RecA monomers form filaments around a 6(1) screw axis. Thus, the c-dimension of the crystal corresponds to the pitch of the RecA filament. As reported for Escherichia coli RecA, the variation in the pitch among the three forms correlates well with the motion of the C-terminal domain of the RecA monomers with respect to the main domain. The domain motion is compatible with formation of inactive as well as active RecA filaments involving monomers with a fully ordered C domain. It does not appear to influence the movement upon nucleotide-binding of the switch residue, which is believed to provide the trigger for transmitting the effect of nucleotide binding to the DNA-binding region. Interestingly, partial dehydration of the crystal results in the movement of the residue similar to that caused by nucleotide binding. The ordering of the DNA-binding loops, which present ensembles of conformations, is also unaffected by domain motion. The conformation of loop L2 appears to depend upon nucleotide binding, presumably on account of the movement of the switch residue that forms part of the loop. The conformations of loops L1 and L2 are correlated and have implications for intermolecular communications within the RecA filament. The structures resulting from different orientations of the C domain and different conformations of the DNA-binding loops appear to represent snapshots of the RecA at different phases of activity, and provide insights into the mechanism of action of RecA.

Origins and evolution of the recA/RAD51 gene family: evidence for ancient gene duplication and endosymbiotic gene transfer

The bacterial recA gene and its eukaryotic homolog RAD51 are important for DNA repair, homologous recombination, and genome stability. Members of the recA/RAD51 family have functions that have differentiated during evolution. However, the evolutionary history and relationships of these members remains unclear. Homolog searches in prokaryotes and eukaryotes indicated that most eubacteria contain only one recA. However, many archaeal species have two recA/RAD51 homologs (RADA and RADB), and eukaryotes possess multiple members (RAD51, RAD51B, RAD51C, RAD51D, DMC1, XRCC2, XRCC3, and recA). Phylogenetic analyses indicated that the recA/RAD51 family can be divided into three subfamilies: (i) RADalpha, with highly conserved functions; (ii) RADbeta, with relatively divergent functions; and (iii) recA, functioning in eubacteria and eukaryotic organelles. The RADalpha and RADbeta subfamilies each contain archaeal and eukaryotic members, suggesting that a gene duplication occurred before the archaea/eukaryote split. In the RADalpha subfamily, eukaryotic RAD51 and DMC1 genes formed two separate monophyletic groups when archaeal RADA genes were used as an outgroup. This result suggests that another duplication event occurred in the early stage of eukaryotic evolution, producing the DMC1 clade with meiosis-specific genes. The RADbeta subfamily has a basal archaeal clade and five eukaryotic clades, suggesting that four eukaryotic duplication events occurred before animals and plants diverged. The eukaryotic recA genes were detected in plants and protists and showed strikingly high levels of sequence similarity to recA genes from proteobacteria or cyanobacteria. These results suggest that endosymbiotic transfer of recA genes occurred from mitochondria and chloroplasts to nuclear genomes of ancestral eukaryotes.

Conformationally selective binding of nucleotide analogues to Escherichia coli RecA: a ligand-based analysis of the RecA ATP binding site

The roles of the RecA protein in the survival of bacteria and the evolution of resistance to antibiotics make it an attractive target for inhibition by small molecules. The activity of RecA is dependent on the formation of a nucleoprotein filament on single-stranded DNA that hydrolyzes ATP. We probed the nucleotide binding site of the active RecA protein using modified nucleotide triphosphates to discern key structural elements of the nucleotide and of the binding site that result in the activation of RecA for NTP hydrolysis. Our results show that the RecA-catalyzed hydrolysis of a given nucleotide triphosphate or analogue thereof is exquisitely sensitive to certain structural elements of both the base and ribose moieties. Furthermore, our ligand-based approach to probing the RecA ATP binding site indicated that the binding of nucleotides by RecA was found to be conformationally selective. Using a binding screen that can be readily adapted to high-throughput techniques, we were able to segregate nucleotides that interact with RecA into two classes: (1) NTPs that preferentially bind the active nucleoprotein filament conformation and either serve as substrates for or competitively inhibit hydrolysis and (2) nonsubstrate NTPs that preferentially bind the inactive RecA conformation and facilitate dissociation of the RecA-DNA species. These results are discussed in the context of a recent structural model for the active RecA nucleoprotein filament and provide us with important information for the design of potent, conformationally selective modulators of RecA activities.

Intersubunit electrostatic complementarity in the RecA nucleoprotein filament regulates nucleotide substrate specificity and conformational activation

The Escherichia coli RecA protein is the prototypical member of a family of molecular motors that transduces ATP binding and hydrolysis for mechanical function. While many general mechanistic features of RecA action are known, specific structural and functional insights into the molecular basis of RecA activation remain elusive. Toward a more complete understanding of the interdependence between ATP and DNA binding by RecA, we report the characterization of a mutant RecA protein wherein the aspartate residue at position 100 within the ATP binding site is replaced by arginine. Physiologically, D100R RecA was characterized by an inducible, albeit reduced, activation of the SOS response and a diminished ability to promote cellular survival after UV irradiation. Biochemically, the D100R substitution caused a surprisingly modest perturbation of RecA-ATP interactions and an unexpected and significant decrease in the affinity of RecA for ssDNA. Moreover, in vitro assays of RecA activities requiring the coordinated processing of ATP and DNA revealed (1) a 2-5-fold decrease in steady-state turnover of ATP; (2) no formation of mixed nucleoprotein filaments when wild-type and D100R RecA compete for limiting ssDNA; and (3) no formation of strand exchange reaction products. Taken together, these results suggest that the D100R mutational effects on isolated RecA activities combine synergistically to perturb its higher-order functions. We conclude that the replacement of Asp100 resulted in a change in the electrostatic complementarity between RecA monomers during active filament assembly that prevents the protein from fully accessing the active multimeric state.

Crystallographic identification of an ordered C-terminal domain and a second nucleotide-binding site in RecA: new insights into allostery

RecA protein is a crucial and central component of the homologous recombination and DNA repair machinery. Despite numerous studies on the protein, several issues concerning its action, including the allosteric regulation mechanism have remained unclear. Here we report, for the first time, a crystal structure of a complex of Mycobacterium smegmatis RecA (MsRecA) with dATP, which exhibits a fully ordered C-terminal domain, with a second dATP molecule bound to it. ATP binding is an essential step for all activities of RecA, since it triggers the formation of active nucleoprotein filaments. In the crystal filament, dATP at the first site communicates with a dATP of the second site of an adjacent subunit, through conserved residues, suggesting a new route for allosteric regulation. In addition, subtle but definite changes observed in the orientation of the nucleotide at the first site and in the positions of the segment preceding loop L2 as well as in the segment 102-105 situated between the 2 nt, all appear to be concerted and suggestive of a biological role for the second bound nucleotide.

Low-Intensity Photosensitization May Enhance RecA Production

Three bacterial strains-Escherichia coli, Acinetobacter calcoaceticus, and the A. calcoaceticus RecA- mutant-underwent photosensitization by a low-concentration (0.73 micromol/L) tetramethyl pyridyl porphine (a cationic hydrophylic photosensitizer) and a 4-J/cm2 dose of 407 to 420 nm blue light. The viability of the first two strains decreased by approximately 60%. and that of the RecA- strain decreased by 90%. Increasing the amount of photosensitizer to 14.6 micromol/L at the same dose of blue light resulted in a 95% to 98% decrease in viability of the three strains. Very little damage to the bacterial DNA was observed after this treatment. Increasing the concentration photosensitizer under the same illumination conditions also resulted in very little damage to the DNA. Western blotting demonstrated that the low photosensitization procedures enhance RecA production for mending the damaged chromosomal DNA. RecA production as a result of low-dose photosensitization was confirmed and demonstrated by immunofluorescent staining and gold immunolabeling. Although DNA is not the primary target for photosensitization, this process of RecA production may provide a certain degree of DNA mending and may also affect the survival of bacterial cells on low-intensity photosensitization.

Structure and mechanism of Escherichia coli RecA ATPase

RecA protein catalyses an ATP-dependent DNA strand-exchange reaction that is the central step in the repair of dsDNA breaks by homologous recombination. Although much is known about the structure of RecA protein itself, we do not at present have a detailed picture of how RecA binds to ssDNA and dsDNA substrates, and how these interactions are controlled by the binding and hydrolysis of the ATP cofactor. Recent studies from electron microscopy and X-ray crystallography have revealed important ATP-mediated conformational changes that occur within the protein, providing new insights into how RecA catalyses DNA strand-exchange. A unifying theme is emerging for RecA and related ATPase enzymes in which the binding of ATP at a subunit interface results in large conformational changes that are coupled to interactions with the substrates in such a way as to promote the desired reactions.

The human stress-activated protein kin17 belongs to the multiprotein DNA replication complex and associates in vivo with mammalian replication origins

The human stress-activated protein kin17 accumulates in the nuclei of proliferating cells with predominant colocalization with sites of active DNA replication. The distribution of kin17 protein is in equilibrium between chromatin-DNA and the nuclear matrix. An increased association with nonchromatin nuclear structure is observed in S-phase cells. We demonstrated here that kin17 protein strongly associates in vivo with DNA fragments containing replication origins in both human HeLa and monkey CV-1 cells. This association was 10-fold higher than that observed with nonorigin control DNA fragments in exponentially growing cells. In addition, the association of kin17 protein to DNA fragments containing replication origins was also analyzed as a function of the cell cycle. High binding of kin17 protein was found at the G(1)/S border and throughout the S phase and was negligible in both G(0) and M phases. Specific monoclonal antibodies against kin17 protein induced a threefold inhibition of in vitro DNA replication of a plasmid containing a minimal replication origin that could be partially restored by the addition of recombinant kin17 protein. Immunoelectron microscopy confirmed the colocalization of kin17 protein with replication proteins like RPA, PCNA, and DNA polymerase alpha. A two-step chromatographic fractionation of nuclear extracts from HeLa cells revealed that kin17 protein localized in vivo in distinct protein complexes of high molecular weight. We found that kin17 protein purified within an approximately 600-kDa protein complex able to support in vitro DNA replication by means of two different biochemical methods designed to isolate replication complexes. In addition, the reduced in vitro DNA replication activity of the multiprotein replication complex after immunodepletion for kin17 protein highlighted for a direct role in DNA replication at the origins.

Gly-103 in the N-terminal domain of Saccharomyces cerevisiae Rad51 protein is critical for DNA binding

Rad51 is a homolog of the bacterial RecA protein and is central for recombination in eukaryotes performing homology search and DNA strand exchange. Rad51 and RecA share a core ATPase domain that is structurally similar to the ATPase domains of helicases and the F1 ATPase. Rad51 has an additional N-terminal domain, whereas RecA protein has an additional C-terminal domain. Here we show that glycine 103 in the N-terminal domain of Saccharomyces cerevisiae Rad51 is important for binding to single-stranded and duplex DNA. The Rad51-G103E mutant protein is deficient in DNA strand exchange and ATPase activity due to a primary DNA binding defect. The N-terminal domain of Rad51 is connected to the ATPase core through an extended elbow linker that ensures flexibility of the N-terminal domain. Molecular modeling of the Rad51-G103E mutant protein shows that the negatively charged glutamate residue lies on the surface of the N-terminal domain facing a positively charged patch composed of Arg-260, His-302, and Lys-305 on the ATPase core domain. A possible structural explanation for the DNA binding defect is that a charge interaction between Glu-103 and the positive patch restricts the flexibility of the N-terminal domain. Rad51-G103E was identified in a screen for Rad51 interaction-deficient mutants and was shown to ablate the Rad54 interaction in two-hybrid assays (Krejci, L., Damborsky, J., Thomsen, B., Duno, M., and Bendixen, C. (2001) Mol. Cell. Biol. 21, 966-976). Surprisingly, we found that the physical interaction of Rad51-G103E with Rad54 was not affected. Our data suggest that the two-hybrid interaction defect was an indirect consequence of the DNA binding defect.

KIN17 encodes an RNA-binding protein and is expressed during mouse spermatogenesis

Genotoxic agents deform DNA structure thus eliciting a complex genetic response allowing recovery and cell survival. The Kin17 gene is up-regulated during this response. This gene encodes a conserved nuclear protein that shares a DNA-binding domain with the bacterial RecA protein. The KIN17 protein binds DNA and displays enhanced expression levels in proliferating cultured cells, suggesting a role in nuclear metabolism. We investigated this by studying the expression profile of KIN17 protein during mouse spermatogenesis. As expected, the expression level of Kin17 is higher in proliferating than in differentiated cells. KIN17 is selectively extracted from this tissue by detergents and a fraction was tightly associated with the nuclear matrix. Germinal cells ubiquitously express Kin17 and the protein is located mainly in the nucleus except in elongated spermatids where cytoplasmic staining is also observed. Sertoli and germ cells that are no longer mitotically active express KIN17, suggesting a general role in all testicular cell types. In adult testis a significant proportion of KIN17 co-purifies with polyadenylated RNA. KIN17 directly binds RNA, preferentially poly(G) and poly(U) homopolymers. These results together with the identification of KIN17 as a component of the human spliceosome indicate that this protein may participate in RNA processing.

Crystal structures of Escherichia coli RecA in a compressed helical filament

The X-ray crystal structure of uncomplexed Escherichia coli RecA protein has been determined in three new crystal forms at resolutions of 1.9 A, 2.0 A, and 2.6 A. The RecA protein used for this study contains the extra residues Gly-Ser-His-Met at the N terminus, but retains normal ssDNA-dependent ATPase and coprotease activities. In all three crystals, RecA is packed in a right-handed helical filament with a pitch of approximately 74 A. These RecA filaments are compressed relative to the original crystal structure of RecA, which has a helical pitch of 82.7 A. In the structures of the compressed RecA filament, the monomer-monomer interface and the core domain are essentially the same as in the RecA structure with the 83 A pitch. The change in helical pitch is accommodated by a small movement of the N-terminal domain, which is reoriented to preserve the contacts it makes at the monomer-monomer interface. The new crystal structures show significant variation in the orientation and conformation of the C-terminal domain, as well as in the inter-filament packing interactions. In crystal form 2, a calcium ion is bound closely to a beta-hairpin of the C-terminal domain and to Asp38 of a neighboring filament, and residues 329-331 of the C-terminal tail become ordered to contact a neighboring filament. In crystal forms 3 and 4, a sulfate ion or a phosphate anion is bound to the same site on RecA as the beta-phosphate group of ADP, causing an opening of the P-loop. Altogether, the structures show the conformational variability of RecA protein in the crystalline state, providing insight into many aspects of RecA function.

The DinI protein stabilizes RecA protein filaments

When DinI is present at concentrations that are stoichiometric with those of RecA or somewhat greater, DinI has a substantial stabilizing effect on RecA filaments bound to DNA. Exchange of RecA between free and bound forms was almost entirely suppressed, and highly stable filaments were documented with several different experimental methods. DinI-mediated stabilization did not affect RecA-mediated ATP hydrolysis and LexA co-protease activities. Initiation of DNA strand exchange was affected in a DNA structure-dependent manner, whereas ongoing strand exchange was not affected. Destabilization of RecA filaments occurred as reported in earlier work but only when DinI protein was present at very high concentrations, generally superstoichiometric, relative to the RecA protein concentration. DinI did not facilitate RecA filament formation but stabilized the filaments only after they were formed. The interaction between the RecA protein and DinI was modulated by the C terminus of RecA. We discuss these results in the context of a new hypothesis for the role of DinI in the regulation of recombination and the SOS response.

Selective interactions of human kin17 and RPA proteins with chromatin and the nuclear matrix in a DNA damage- and cell cycle-regulated manner

Several proteins involved in DNA synthesis are part of the so-called 'replication factories' that are anchored on non-chromatin nuclear structures. We report here that human kin17, a nuclear stress-activated protein, associates with both chromatin and non-chromatin nuclear structures in a cell cycle- and DNA damage-dependent manner. After L-mimosine block and withdrawal we observed that kin17 protein was recruited in the nucleus during re-entry and progression through S phase. These results are consistent with a role of kin17 protein in DNA replication. About 50% of the total amount of kin17 protein was detected on nuclear structures and could not be released by detergents. Furthermore, the amount of kin17 protein greatly increased in both G(1)/S and S phase-arrested cells in fractions containing proteins anchored to nuclear structures. The detection of kin17 protein showed for the first time its preferential assembly within non-chromatin nuclear structures in G(1)/S and S phase-arrested cells, while the association with these structures was found to be less stable in the G(2)/M phase, as judged by fractionation of human cells and immunostaining. In asynchronous growing cells, kin17 protein interacted with both chromatin DNA and non-chromatin nuclear structures, while in S phase-arrested cells it interacted mostly with non-chromatin nuclear structures, as judged by DNase I treatment and in vivo UV cross-linking. In the presence of DNA damage in S phase cells, the distribution of kin17 protein became mainly associated with chromosomal DNA, as judged by limited formaldehyde cross-linking of living cells. The physical interaction of kin17 protein with components of the nuclear matrix was confirmed and visualized by indirect immunofluorescence and immunoelectron microscopy. Our results indicate that, during S phase, a fraction of the human kin17 protein preferentially associates with the nuclear matrix, a fundamentally non-chromatin higher order nuclear structure, and to chromatin DNA in the presence of DNA damage.

Regulation of RecA protein binding to DNA by opposing effects of ATP and ADP on inter-domain contacts: analysis by urea-induced unfolding of wild-type and C-terminal truncated RecA

RecA protein requires ATP and its hydrolysis to ADP to complete the DNA strand-exchange reaction. We investigated how the nucleotides activate RecA by examining their effect on urea-induced unfolding, which could reflect domain-domain contact of protein. RecA is folded into three continuous domains: the N-terminal, central and C-terminal domains. The fluorescence of tyrosine residues, which lie mainly in the central domain, was modified in 1-3 M urea, while the red shift of fluorescence peak of the tryptophan residues located in the C-terminal domain occurred only in 3-6 M urea. Thus, the C-terminal domain of RecA is unfolded after the central part unfolds. The change in intensity of tryptophan fluorescence without a large shift in the peak at low concentrations of urea suggests that there are weak interactions between the central and C-terminal domains. This is supported by our observation that RecA protein lacking the C-terminal tail unfolded at lower concentrations of urea than the entire RecA, and with clear transitions, unlike the entire RecA. ATP and its unhydrolyzable analog (ATPgammaS), which enhance the binding of RecA to DNA, facilitated the urea-induced change in RecA tryptophan fluorescence, while ADP, an antagonist of ATP, prevented the change. ATP probably weakens the domain-domain contact and facilitates the DNA binding, while ADP stabilizes the contact and inhibits it. Supporting this conclusion, the binding of RecA lacking the C-terminal tail to DNA was not inhibited by ADP, while that of the intact RecA was.

Magnesium ion-dependent activation of the RecA protein involves the C terminus

Optimal conditions for RecA protein-mediated DNA strand exchange include 6-8 mm Mg(2+) in excess of that required to form complexes with ATP. We provide evidence that the free magnesium ion is required to mediate a conformational change in the RecA protein C terminus that activates RecA-mediated DNA strand exchange. In particular, a "closed" (low Mg(2+)) conformation of a RecA nucleoprotein filament restricts DNA pairing by incoming duplex DNA, although single-stranded overhangs at the ends of a duplex allow limited DNA pairing to occur. The addition of excess Mg(2+) results in an "open" conformation, which can promote efficient DNA pairing and strand exchange regardless of DNA end structure. The removal of 17 amino acid residues at the Escherichia coli RecA C terminus eliminates a measurable requirement for excess Mg(2+) and permits efficient DNA pairing and exchange similar to that seen with the wild-type protein at high Mg(2+) levels. Thus, the RecA C terminus imposes the need for the high magnesium ion concentrations requisite in RecA reactions in vitro. We propose that the C terminus acts as a regulatory switch, modulating the access of double-stranded DNA to the presynaptic filament and thereby inhibiting homologous DNA pairing and strand exchange at low magnesium ion concentrations.

An NMR study on the interaction of Escherichia coli DinI with RecA-ssDNA complexes

The SOS response, a set of cellular phenomena exhibited by eubacteria, is initiated by various causes that include DNA damage-induced replication arrest, and is positively regulated by the co- protease activity of RecA. Escherichia coli DinI, a LexA-regulated SOS gene product, shuts off the initiation of the SOS response when overexpressed in vivo. Biochemical and genetic studies indicated that DinI physically interacts with RecA to inhibit its co-protease activity. Using nuclear magnetic resonance (NMR) spectroscopy, we show that DinI tightly binds to the central region of RecA (between the N- and C-terminal domains) and that this interaction is enhanced upon the oligomerisation of RecA. On the other hand, DinI did not inhibit the interaction between 4mer single-stranded (ss)DNA and RecA- ATPgammaS, but had a slight effect on the structure of ssDNA-RecA-ATPgammaS complexes involving 8mer and 12mer ssDNA. We hypothesise that prevention of repressor binding to the intermolecular cleft region of RecA protomers by DinI, with the possibility of a slight conformational change induced in the DinI-bound ssDNA-RecA-ATPgammaS complex, together function to inhibit the co-protease activity of RecA.

ATP-mediated conformational changes in the RecA filament

The crystal structure of the E. coli RecA protein was solved more than 10 years ago, but it has provided limited insight into the mechanism of homologous genetic recombination. Using electron microscopy, we have reconstructed five different states of RecA-DNA filaments. The C-terminal lobe of the RecA protein is modulated by the state of the distantly bound nucleotide, and this allosteric coupling can explain how mutations and truncations of this C-terminal lobe enhance RecA's activity. A model generated from these reconstructions shows that the nucleotide binding core is substantially rotated from its position in the RecA crystal filament, resulting in ATP binding between subunits. This simple rotation can explain the large cooperativity in ATP hydrolysis observed for RecA-DNA filaments.

The bacterial RecA protein and the recombinational DNA repair of stalled replication forks

The primary function of bacterial recombination systems is the nonmutagenic repair of stalled or collapsed replication forks. The RecA protein plays a central role in these repair pathways, and its biochemistry must be considered in this context. RecA protein promotes DNA strand exchange, a reaction that contributes to fork regression and DNA end invasion steps. RecA protein activities, especially formation and disassembly of its filaments, affect many additional steps. So far, Escherichia coli RecA appears to be unique among its nearly ubiquitous family of homologous proteins in that it possesses a motorlike activity that can couple the branch movement in DNA strand exchange to ATP hydrolysis. RecA is also a multifunctional protein, serving in different biochemical roles for recombinational processes, SOS induction, and mutagenic lesion bypass. New biochemical and structural information highlights both the similarities and distinctions between RecA and its homologs. Increasingly, those differences can be rationalized in terms of biological function.

Ionizing radiation triggers chromatin-bound kin17 complex formation in human cells

The human DNA-binding (HSA)kin17 protein cross-reacts with antibodies raised against the stress-activated Escherichia coli RecA protein. We show here that (HSA)kin17 protein is directly associated with chromosomal DNA as judged by cross-linking experiments on living cells. We detected increased amounts of DNA-bound (HSA)kin17 protein 24 h after gamma irradiation, with 2.6-fold more (HSA)kin17 molecules after 6 Gy of irradiation (46,000-117,000 molecules). At this time we observed that highly proliferating RKO cells displayed the concentration and co-localization of (HSA)kin17 and replication protein A in nucleoplasmic foci. Our results suggest that 24 h post-irradiation (HSA)kin17 protein may localize at the sites of unrepaired DNA damages. RKO clones expressing an (HSA)KIN17 antisense transcript (RASK.5 and RASK.13 cells) revealed that reduced (HSA)kin17 protein levels are correlated with a decrease in clonogenic cell growth and cell proliferation, as well as an accumulation of cells in early and mid-S phase. Taken together our observations support the idea that (HSA)kin17 protein is a DNA maintenance protein involved in the cellular response to the presence of DNA damage and suggest that it helps to overcome the perturbation of DNA replication produced by unrepaired lesions.