Tau protects beta in the leading-strand polymerase complex at the replication fork

Clamp Loader Processing Is Important during DNA Replication Stress

The DNA clamp loader is critical to the processivity of the DNA polymerase and coordinating synthesis on the leading and lagging strands. In bacteria, the major subunit of the clamp loader, DnaX, has two forms: the essential full-length τ form and shorter γ form. These are conserved across bacterial species, and three distinct mechanisms have been found to create them: ribosomal frameshift, transcriptional slippage, and, in Caulobacter crescentus, partial proteolysis. This conservation suggests that DnaX processing is evolutionarily important, but its role remains unknown. Here we find a bias against switching from expression of a wild-type dnaX to a nonprocessable τ-only allele in Caulobacter. Despite this bias, cells are able to adapt to the τ-only allele with little effect on growth or morphology and only minor defects during DNA damage. Motivated by transposon sequencing, we find that loss of the gene sidA in the τ-only strain slows growth and increases filamentation. Even in the absence of exogenous DNA damage treatment, the ΔsidA τ-only double mutant shows induction of and dependence on recA, likely due to a defect in resolution of DNA damage or replication fork stalling. We find that some of the phenotypes of the ΔsidA τ-only mutant can be complemented by expression of γ but that an overabundance of τ-only dnaX is also detrimental. The data presented here suggest that DnaX processing is important during resolution of DNA damage events during DNA replication stress. Although the presence of DnaX τ and γ forms is conserved across bacteria, different species have developed different mechanisms to make these forms. This conservation and independent evolution of mechanisms suggest that having two forms of DnaX is important. Despite having been discovered more than 30 years ago, the purpose of expressing both τ and γ is still unclear. Here, we present evidence that expressing two forms of DnaX and controlling the abundance and/or ratio of the forms are important during the resolution of DNA replication stress. IMPORTANCE Though the presence of DnaX τ and γ forms is conserved across bacteria, different species have developed different mechanisms to make these forms. This conservation and independent evolution of mechanisms suggest that having two forms of DnaX is important. Despite having been discovered more than 30 years ago, the purpose of expressing both τ and γ is still unclear. Here, we present evidence that expressing two forms of DnaX and controlling the abundance and/or ratio of the forms is important during the resolution of DNA replication stress.

Identification of genetic interactions with priB links the PriA/PriB DNA replication restart pathway to double-strand DNA break repair in Escherichia coli

Collisions between DNA replication complexes (replisomes) and impediments such as damaged DNA or proteins tightly bound to the chromosome lead to premature dissociation of replisomes at least once per cell cycle in Escherichia coli. Left unrepaired, these events produce incompletely replicated chromosomes that cannot be properly partitioned into daughter cells. DNA replication restart, the process that reloads replisomes at prematurely terminated sites, is therefore essential in E. coli and other bacteria. Three replication restart pathways have been identified in E. coli: PriA/PriB, PriA/PriC, and PriC/Rep. A limited number of genetic interactions between replication restart and other genome maintenance pathways have been defined, but a systematic study placing replication restart reactions in a broader cellular context has not been performed. We have utilized transposon-insertion sequencing to identify new genetic interactions between DNA replication restart pathways and other cellular systems. Known genetic interactors with the priB replication restart gene (uniquely involved in the PriA/PriB pathway) were confirmed and several novel priB interactions were discovered. Targeted genetic and imaging-based experiments with priB and its genetic partners revealed significant double-strand DNA break accumulation in strains with mutations in dam, rep, rdgC, lexA, or polA. Modulating the activity of the RecA recombinase partially suppressed the detrimental effects of rdgC or lexA mutations in ΔpriB cells. Taken together, our results highlight roles for several genes in double-strand DNA break homeostasis and define a genetic network that facilitates DNA repair/processing upstream of PriA/PriB-mediated DNA replication restart in E. coli.

Mechanisms of bacterial DNA replication restart

Multi-protein DNA replication complexes called replisomes perform the essential process of copying cellular genetic information prior to cell division. Under ideal conditions, replisomes dissociate only after the entire genome has been duplicated. However, DNA replication rarely occurs without interruptions that can dislodge replisomes from DNA. Such events produce incompletely replicated chromosomes that, if left unrepaired, prevent the segregation of full genomes to daughter cells. To mitigate this threat, cells have evolved 'DNA replication restart' pathways that have been best defined in bacteria. Replication restart requires recognition and remodeling of abandoned replication forks by DNA replication restart proteins followed by reloading of the replicative DNA helicase, which subsequently directs assembly of the remaining replisome subunits. This review summarizes our current understanding of the mechanisms underlying replication restart and the proteins that drive the process in Escherichia coli (PriA, PriB, PriC and DnaT).

Structure and Function of the PriC DNA Replication Restart Protein

Collisions between DNA replication complexes (replisomes) and barriers such as damaged DNA or tightly bound protein complexes can dissociate replisomes from chromosomes prematurely. Replisomes must be reloaded under these circumstances to avoid incomplete replication and cell death. Bacteria have evolved multiple pathways that initiate DNA replication restart by recognizing and remodeling abandoned replication forks and reloading the replicative helicase. In vitro, the simplest of these pathways is mediated by the single-domain PriC protein, which, along with the DnaC helicase loader, can load the DnaB replicative helicase onto DNA bound by the single-stranded DNA (ssDNA)-binding protein (SSB). Previous biochemical studies have identified PriC residues that mediate interactions with ssDNA and SSB. However, the mechanisms by which PriC drives DNA replication restart have remained poorly defined due to the limited structural information available for PriC. Here, we report the NMR structure of full-length PriC from Cronobacter sakazakii PriC forms a compact bundle of α-helices that brings together residues involved in ssDNA and SSB binding at adjacent sites on the protein surface. Disruption of these interaction sites and of other conserved residues leads to decreased DnaB helicase loading onto SSB-bound DNA. We also demonstrate that PriC can directly interact with DnaB and the DnaB·DnaC complex. These data lead to a model in which PriC acts as a scaffold for recruiting DnaB·DnaC to SSB/ssDNA sites present at stalled replication forks.

DNA Polymerase α Subunit Residues and Interactions Required for Efficient Initiation Complex Formation Identified by a Genetic Selection

Biophysical and structural studies have defined many of the interactions that occur between individual components or subassemblies of the bacterial replicase, DNA polymerase III holoenzyme (Pol III HE). Here, we extended our knowledge of residues and interactions that are important for the first step of the replicase reaction: the ATP-dependent formation of an initiation complex between the Pol III HE and primed DNA. We exploited a genetic selection using a dominant negative variant of the polymerase catalytic subunit that can effectively compete with wild-type Pol III α and form initiation complexes, but cannot elongate. Suppression of the dominant negative phenotype was achieved by secondary mutations that were ineffective in initiation complex formation. The corresponding proteins were purified and characterized. One class of mutant mapped to the PHP domain of Pol III α, ablating interaction with the ϵ proofreading subunit and distorting the polymerase active site in the adjacent polymerase domain. Another class of mutation, found near the C terminus, interfered with τ binding. A third class mapped within the known β-binding domain, decreasing interaction with the β2 processivity factor. Surprisingly, mutations within the β binding domain also ablated interaction with τ, suggesting a larger τ binding site than previously recognized.

Dynamics of leading-strand lesion skipping by the replisome

The E. coli replisome stalls transiently when it encounters a lesion in the leading-strand template, skipping over the damage by reinitiating replication at a new primer synthesized downstream by the primase. We report here that template unwinding and lagging-strand synthesis continue downstream of the lesion at a reduced rate after replisome stalling, that one replisome is capable of skipping multiple lesions, and that the rate-limiting steps of replication restart involve the synthesis and activation of the new primer downstream. We also find little support for the concept that polymerase uncoupling, where extensive lagging-strand synthesis proceeds downstream in the absence of leading-strand synthesis, involves physical separation of the leading-strand polymerase from the replisome. Instead, our data indicate that extensive uncoupled replication likely results from a failure of the leading-strand polymerase still associated with the DNA helicase and the lagging-strand polymerase that are proceeding downstream to reinitiate synthesis.

Fate of the replisome following arrest by UV-induced DNA damage in Escherichia coli

Accurate replication in the presence of DNA damage is essential to genome stability and viability in all cells. In Escherichia coli, DNA replication forks blocked by UV-induced damage undergo a partial resection and RecF-catalyzed regression before synthesis resumes. These processing events generate distinct structural intermediates on the DNA that can be visualized in vivo using 2D agarose gels. However, the fate and behavior of the stalled replisome remains a central uncharacterized question. Here, we use thermosensitive mutants to show that the replisome's polymerases uncouple and transiently dissociate from the DNA in vivo. Inactivation of α, β, or τ subunits within the replisome is sufficient to signal and induce the RecF-mediated processing events observed following UV damage. By contrast, the helicase-primase complex (DnaB and DnaG) remains critically associated with the fork, leading to a loss of fork integrity, degradation, and aberrant intermediates when disrupted. The results reveal a dynamic replisome, capable of partial disassembly to allow access to the obstruction, while retaining subunits that maintain fork licensing and direct reassembly to the appropriate location after processing has occurred.

DNA replicases from a bacterial perspective

Bacterial replicases are complex, tripartite replicative machines. They contain a polymerase, polymerase III (Pol III), a β₂ processivity factor, and a DnaX complex ATPase that loads β₂ onto DNA and chaperones Pol III onto the newly loaded β₂. Bacterial replicases are highly processive, yet cycle rapidly during Okazaki fragment synthesis in a regulated way. Many bacteria encode both a full-length τ and a shorter γ form of DnaX by a variety of mechanisms. γ appears to be uniquely placed in a single position relative to two τ protomers in a pentameric ring. The polymerase catalytic subunit of Pol III, α, contains a PHP domain that not only binds to a prototypical ε Mg²⁺-dependent exonuclease, but also contains a second Zn²⁺-dependent proofreading exonuclease, at least in some bacteria. This review focuses on a critical evaluation of recent literature and concepts pertaining to the above issues and suggests specific areas that require further investigation.

Polymerase chaperoning and multiple ATPase sites enable the E. coli DNA polymerase III holoenzyme to rapidly form initiation complexes

Cellular replicases include three subassemblies: a DNA polymerase, a sliding clamp processivity factor, and a clamp loader complex. The Escherichia coli clamp loader is the DnaX complex (DnaX(3)δδ'χψ), where DnaX occurs either as τ or as the shorter γ that arises by translational frameshifting. Complexes composed of either form of DnaX are fully active clamp loaders, but τ confers important replicase functions including chaperoning the polymerase to the newly loaded clamp to form an initiation complex for processive replication. The kinetics of initiation complex formation were explored for DnaX complexes reconstituted with varying τ and γ stoichiometries, revealing that τ-mediated polymerase chaperoning accelerates initiation complex formation by 100-fold. Analyzing DnaX complexes containing one or more K51E variant DnaX subunits demonstrated that only one active ATP binding site is required to form initiation complexes, but the two additional sites increase the rate by ca 1000-fold. For τ-containing complexes, the ATP analogue ATPγS was found to support initiation complex formation at 1/1000th the rate with ATP. In contrast to previous models that proposed ATPγS drives hydrolysis-independent initiation complex formation by τ-containing complexes, the rate and stoichiometry of ATPγS hydrolysis coincide with those for initiation complex formation. These results show that although one ATPase site is sufficient for initiation complex formation, the combination of polymerase chaperoning and the binding and hydrolysis of three ATPs dramatically accelerates initiation complex formation to a rate constant (25-50 s(-1)) compatible with double-stranded DNA replication.

E. coli DNA replication in the absence of free β clamps

During DNA replication, repetitive synthesis of discrete Okazaki fragments requires mechanisms that guarantee DNA polymerase, clamp, and primase proteins are present for every cycle. In Escherichia coli, this process proceeds through transfer of the lagging-strand polymerase from the β sliding clamp left at a completed Okazaki fragment to a clamp assembled on a new RNA primer. These lagging-strand clamps are thought to be bound by the replisome from solution and loaded a new for every fragment. Here, we discuss a surprising, alternative lagging-strand synthesis mechanism: efficient replication in the absence of any clamps other than those assembled with the replisome. Using single-molecule experiments, we show that replication complexes pre-assembled on DNA support synthesis of multiple Okazaki fragments in the absence of excess β clamps. The processivity of these replisomes, but not the number of synthesized Okazaki fragments, is dependent on the frequency of RNA-primer synthesis. These results broaden our understanding of lagging-strand synthesis and emphasize the stability of the replisome to continue synthesis without new clamps.

Only one ATP-binding DnaX subunit is required for initiation complex formation by the Escherichia coli DNA polymerase III holoenzyme

The DnaX complex (DnaX(3)δδ'χ psi) within the Escherichia coli DNA polymerase III holoenzyme serves to load the dimeric sliding clamp processivity factor, β(2), onto DNA. The complex contains three DnaX subunits, which occur in two forms: τ and the shorter γ, produced by translational frameshifting. Ten forms of E. coli DnaX complex containing all possible combinations of wild-type or a Walker A motif K51E variant τ or γ have been reconstituted and rigorously purified. DnaX complexes containing three DnaX K51E subunits do not bind ATP. Comparison of their ability to support formation of initiation complexes, as measured by processive replication by the DNA polymerase III holoenzyme, indicates a minimal requirement for one ATP-binding DnaX subunit. DnaX complexes containing two mutant DnaX subunits support DNA synthesis at about two-thirds the level of their wild-type counterparts. β(2) binding (determined functionally) is diminished 12-30-fold for DnaX complexes containing two K51E subunits, suggesting that multiple ATPs must be bound to place the DnaX complex into a conformation with maximal affinity for β(2). DNA synthesis activity can be restored by increased concentrations of β(2). In contrast, severe defects in ATP hydrolysis are observed upon introduction of a single K51E DnaX subunit. Thus, ATP binding, hydrolysis, and the ability to form initiation complexes are not tightly coupled. These results suggest that although ATP hydrolysis likely enhances β(2) loading, it is not absolutely required in a mechanistic sense for formation of functional initiation complexes.

Chaperoning of a replicative polymerase onto a newly assembled DNA-bound sliding clamp by the clamp loader

Cellular replicases contain multiprotein ATPases that load sliding clamp processivity factors onto DNA. We reveal an additional role for the DnaX clamp loader: chaperoning of the replicative polymerase onto a clamp newly bound to DNA. We show that chaperoning confers distinct advantages, including marked acceleration of initiation complex formation. We reveal a requirement for the tau form of DnaX complex to relieve inhibition by single-stranded DNA binding protein during initiation complex formation. We propose that, after loading beta(2), DnaX complex preserves an SSB-free segment of DNA immediately downstream of the primer terminus and chaperones Pol III into that position, preventing competition by SSB. The C-terminal tail of SSB stimulates reactions catalyzed by tau-containing DnaX complexes through a contact distinct from the contact involving the chi subunit. Chaperoning of Pol III by the DnaX complex provides a molecular explanation for how initiation complexes form when supported by the nonhydrolyzed analog ATPgammaS.

Loading clamps for DNA replication and repair

Sliding clamps and clamp loaders were initially identified as DNA polymerase processivity factors. Sliding clamps are ring-shaped protein complexes that encircle and slide along duplex DNA, and clamp loaders are enzymes that load these clamps onto DNA. When bound to a sliding clamp, DNA polymerases remain tightly associated with the template being copied, but are able to translocate along DNA at rates limited by rates of nucleotide incorporation. Many different enzymes required for DNA replication and repair use sliding clamps. Clamps not only increase the processivity of these enzymes, but may also serve as an attachment point to coordinate the activities of enzymes required for a given process. Clamp loaders are members of the AAA+ family of ATPases and use energy from ATP binding and hydrolysis to catalyze the mechanical reaction of loading clamps onto DNA. Many structural and functional features of clamps and clamp loaders are conserved across all domains of life. Here, the mechanism of clamp loading is reviewed by comparing features of prokaryotic and eukaryotic clamps and clamp loaders.

The replication clamp-loading machine at work in the three domains of life

Sliding clamps are ring-shaped proteins that tether DNA polymerases to DNA, which enables the rapid and processive synthesis of both leading and lagging strands at the replication fork. The clamp-loading machinery must repeatedly load sliding-clamp factors onto primed sites at the replication fork. Recent structural and biochemical analyses provide unique insights into how these clamp-loading ATPase machines function to load clamps onto the DNA. Moreover, these studies highlight the evolutionary conservation of the clamp-loading process in the three domains of life.

Dynamics of loading the Escherichia coli DNA polymerase processivity clamp

Sliding clamps and clamp loaders are processivity factors required for efficient DNA replication. Sliding clamps are ring-shaped complexes that tether DNA polymerases to DNA to increase the processivity of synthesis. Clamp loaders assemble these ring-shaped clamps onto DNA in an ATP-dependent reaction. The overall process of clamp loading is dynamic in that protein-protein and protein-DNA interactions must actively change in a coordinated fashion to complete the mechanical clamp-loading reaction cycle. The clamp loader must initially have a high affinity for both the clamp and DNA to bring these macromolecules together, but then must release the clamp on DNA for synthesis to begin. Evidence is presented for a mechanism in which the clamp-loading reaction comprises a series of binding reactions to ATP, the clamp, DNA, and ADP, each of which promotes some change in the conformation of the clamp loader that alters interactions with the next component of the pathway. These changes in interactions must be rapid enough to allow the clamp loader to keep pace with replication fork movement. This review focuses on the measurement of dynamic and transient interactions required to assemble the Escherichia coli sliding clamp on DNA.

A bipartite polymerase-processivity factor interaction: only the internal beta binding site of the alpha subunit is required for processive replication by the DNA polymerase III holoenzyme

Previously, we localized the beta2 interacting portion of the catalytic subunit (alpha) of DNA polymerase III to the C-terminal half, downstream of the polymerase active site. Since then, two different beta2 binding sites within this region have been proposed. An internal site includes amino acid residues 920-924 (QADMF) and an extreme C-terminal site includes amino acid residues 1154-1159 (QVELEF). To permit determination of their relative contributions, we made mutations in both sites and evaluated the biochemical, genetic, and protein binding properties of the mutant alpha subunits. All purified mutant alpha subunits retained near wild-type polymerase function, which was measured in non-processive gap-filling assays. Mutations in the internal site abolished the ability of mutant alpha subunits to participate in processive synthesis. Replacement of the five-residue internal sequence with AAAKK eliminated detectable binding to beta2. In addition, mutation of residues required for beta2 binding abolished the ability of the resulting polymerase to participate in chromosomal replication in vivo. In contrast, mutations in the C-terminal site exhibited near wild-type phenotypes. alpha Subunits with the C-terminal site completely removed could participate in processive DNA replication, could bind beta2, and, if induced to high level expression, could complement a temperature-sensitive conditional lethal dnaE mutation. C-terminal defects that only partially complemented correlated with a defect in binding to tau, not beta2. A C-terminal deletion only reduced beta2 binding fourfold; tau binding was decreased ca 400-fold. The context in which the beta2 binding site was presented made an enormous difference. Replacement of the internal site with a consensus beta2 binding sequence increased the affinity of the resulting alpha for beta2 over 100-fold, whereas the same modification at the C-terminal site did not significantly increase binding. The implications of multiple interactions between a replicase and its processivity factor, including applications to polymerase cycling and interchange with other polymerases and factors at the replication fork, are discussed.

Mechanisms of replication fork restart in Escherichia coli

Replication of the genome is crucial for the accurate transmission of genetic information. It has become clear over the last decade that the orderly progression of replication forks in both prokaryotes and eukaryotes is disrupted with high frequency by encounters with various obstacles either on or in the template strands. Survival of the organism then becomes dependent on both removal of the obstruction and resumption of replication. This latter point is particularly important in bacteria, where the number of replication forks per genome is nominally only two. Replication restart in Escherichia coli is accomplished by the action of the restart primosomal proteins, which use both recombination intermediates and stalled replication forks as substrates for loading new replication forks. These reactions have been reconstituted with purified recombination and replication proteins.

Chromosomal replicases as asymmetric dimers: studies of subunit arrangement and functional consequences

Studies of the DNA polymerase III holoenzyme of Escherichia coli support a model in which both the leading and lagging strand polymerases are held together in a complex with the replicative helicase and priming activities, allowing two identical alpha catalytic subunits to assume different functions on the two strands of the replication fork. Creation of distinct functions for each of the two polymerases within the holoenzyme depends on the asymmetric character of the entire complex. The asymmetry of the holoenzyme is created by the DnaX complex, a heptamer that includes tau and gamma products of the dnaX gene. tau and gamma perform unique functions in the DnaX complex, and the interaction between alpha and tau appears to dictate the catalytic subunit's role in the replicative reaction. This review considers the properties of the DnaX complex including both tau and gamma, with the goal of understanding the properties of the replicase and its function in vivo. Recent studies in eukaryotic and other prokaryotic systems suggest that an asymmetric dimeric replicase may be universal. The leading and lagging strand polymerases may be distinct in some systems. For example, Pol e and Pol delta may function as distinct leading and lagging strand polymerases in eukaryotes, and PolC and DnaE may function as distinct leading and lagging strand polymerases in low GC content Gram-positive bacteria.

DNA polymerase III holoenzyme from Thermus thermophilus identification, expression, purification of components, and use to reconstitute a processive replicase

DNA replication in bacteria is performed by a specialized multicomponent replicase, the DNA polymerase III holoenzyme, that consist of three essential components: a polymerase, the beta sliding clamp processivity factor, and the DnaX complex clamp-loader. We report here the assembly of the minimal functional holoenzyme from Thermus thermophilus (Tth), an extreme thermophile. The minimal holoenzyme consists of alpha (pol III catalytic subunit), beta (sliding clamp processivity factor), and the essential DnaX (tau/gamma), delta and delta' components of the DnaX complex. We show with purified recombinant proteins that these five components are required for rapid and processive DNA synthesis on long single-stranded DNA templates. Subunit interactions known to occur in DNA polymerase III holoenzyme from mesophilic bacteria including delta-delta' interaction, deltadelta'-tau/gamma complex formation, and alpha-tau interaction, also occur within the Tth enzyme. As in mesophilic holoenzymes, in the presence of a primed DNA template, these subunits assemble into a stable initiation complex in an ATP-dependent manner. However, in contrast to replicative polymerases from mesophilic bacteria, Tth holoenzyme is efficient only at temperatures above 50 degrees C, both with regard to initiation complex formation and processive DNA synthesis. The minimal Tth DNA polymerase III holoenzyme displays an elongation rate of 350 bp/s at 72 degrees C and a processivity of greater than 8.6 kilobases, the length of the template that is fully replicated after a single association event.

Imbalanced DNA synthesis induced by cytosine arabinoside and fludarabine in human leukemia cells11Abbreviations: araC, 1-β-d-arabinofuranosylcytosine (cytosine arabinoside); araA, 1-β-d-arabinofuranosyladenine; BrdUrd, 5-bromo-2′-deoxyuridine; FaraA, 1-β-d-arabinofuranosyl-2-fluoroadenine (fludarabine); ic50, concentration that reduces cloning efficiency by 50%; GAPDH, glyceraldehyde-3-phosphate dehydrogenase; PALA, N-(phosphonacetyl)-l-aspartate; and SSC, standard saline citrate

Previous studies have demonstrated that cytosine arabinoside (araC) induces an accumulation of Okazaki fragments, while fludarabine (FaraA) inhibits Okazaki fragment synthesis. We extended these observations in the present study to provide insights into various mechanisms by which these anticancer drugs affect DNA replication and induce genomic instability in human CEM leukemia cells. Neither araC nor FaraA induced a detectable amount of re-replicated DNA in S-phase cells, which indicated that drug-induced alterations in Okazaki fragment synthesis were not accompanied by DNA re-replication. Synthesis on both leading and lagging DNA strands within the c-myc locus was measured in cells incubated with equitoxic concentrations of araC or FaraA. In araC-treated cells, nascent DNA from the lagging strand was enriched about 5-fold compared with the leading strand. In contrast, FaraA did not induce any replication imbalance. AraC- and FaraA induced changes in the frequency of N-(phosphonacetyl)-l-aspartate (PALA) resistance and the extent of CAD gene amplification were monitored as markers of drug-induced genomic instability. At concentrations that reduced cloning efficiency by 50% (IC(50)), araC increased the frequency of PALA resistance about 4-fold, while FaraA did not have a significant effect on the frequency of PALA resistance. Pretreatment with araC also increased the extent of CAD gene amplification. We propose that the imbalanced DNA synthesis induced by araC leads to the accumulation of Okazaki fragments on the lagging arms and single-stranded DNA regions on the leading arms of replication forks. The formation of these abnormal replication structures was associated with the generation of genomic instability.

The DNA polymerase III holoenzyme: an asymmetric dimeric replicative complex with leading and lagging strand polymerases

The DNA Polymerase III holoenzyme forms initiation complexes on primed DNA in an ATP-dependent reaction. We demonstrate that the nonhydrolyzable ATP analog, ATP gamma S, supports the formation of an isolable leading strand complex that loads and replicates the lagging strand only in the presence of ATP, beta, and the single-stranded DNA binding protein. The single endogenous DnaX complex within DNA polymerase III holoenzyme assembles beta onto both the leading and lagging strand polymerases by an ordered mechanism. The dimeric replication complex disassembles in the opposite order from which it assembled. Upon ATP gamma S-induced dissociation, the leading strand polymerase is refractory to disassembly allowing cycling to occur exclusively on the lagging strand. These results establish holoenzyme as an intrinsic asymmetric dimer with distinguishable leading and lagging strand polymerases.

tau binds and organizes Escherichia coli replication through distinct domains. Partial proteolysis of terminally tagged tau to determine candidate domains and to assign domain V as the alpha binding domain

The tau subunit dimerizes Escherichia coli DNA polymerase III core through interactions with the alpha subunit. In addition to playing critical roles in the structural organization of the holoenzyme, tau mediates intersubunit communications required for efficient replication fork function. We identified potential structural domains of this multifunctional subunit by limited proteolysis of C-terminal biotin-tagged tau proteins. The cleavage sites of each of eight different proteases were found to be clustered within four regions of the tau subunit. The second susceptible region corresponds to the hinge between domain II and III of the highly homologous delta' subunit, and the third region is near the C-terminal end of the tau-delta' alignment (Guenther, B., Onrust, R., Sali, A., O'Donnell, M., and Kuriyan, J. (1997) Cell 91, 335-345). We propose a five-domain structure for the tau protein. Domains I and II are based on the crystallographic structure of delta' by Guenther and colleagues. Domains III-V are based on our protease cleavage results. Using this information, we expressed biotin-tagged tau proteins lacking specific protease-resistant domains and analyzed their binding to the alpha subunit by surface plasmon resonance. Results from these studies indicated that the alpha binding site of tau lies within its C-terminal 147 residues (domain V).

Two distinct triggers for cycling of the lagging strand polymerase at the replication fork

There are two modes of DNA synthesis at a replication fork. The leading strand is synthesized in a continuous fashion in lengths that in Escherichia coli can be in excess of 2 megabases. On the other hand, the lagging strand is synthesized in relatively short stretches of 2 kilobases. Nevertheless, identical assemblies of the DNA polymerase III core tethered to the beta sliding clamp account for both modes of DNA synthesis. Yet the same lagging strand polymerase accounts for the synthesis of all Okazaki fragments at a replication fork, cycling repeatedly every 1 or 2 s from the 3'-end of the just-completed fragment to the 3'-end of the new primer. Several models have been invoked to account for the rapid cycling of a polymerase complex that can remain bound to the template for upward of 40 min. By using isolated replication protein-DNA template complexes, we have tested these models and show here that cycling of the lagging strand polymerase can be triggered by either the action of primase binding to the replisome and synthesizing a primer or by collision of the lagging strand polymerase with the 5'-end of the previous Okazaki fragment.

Escherichia coli DNA polymerase III tau- and gamma-subunit conserved residues required for activity in vivo and in vitro

The Escherichia coli DNA polymerase III tau and gamma subunits are single-strand DNA-dependent ATPases (the latter requires the delta and delta' subunits for significant ATPase activity) involved in loading processivity clamp beta. They are homologous to clamp-loading proteins of many organisms from phages to humans. Alignment of 27 prokaryotic tau/gamma homologs and 1 eukaryotic tau/gamma homolog has refined the sequences of nine previously defined identity and functional motifs. Mutational analysis has defined highly conserved residues required for activity in vivo and in vitro. Specifically, mutations introduced into highly conserved residues within three of those motifs, the P loop, the DExx region, and the SRC region, inactivated complementing activity in vivo and clamp loading in vitro and reduced ATPase catalytic efficiency in vitro. Mutation of a highly conserved residue within a fourth motif, VIc, inactivated clamp-loading activity and reduced ATPase activity in vitro, but the mutant gene, on a multicopy plasmid, retained complementing activity in vivo and the mutant gene also supported apparently normal replication and growth as a haploid, chromosomal allele.

Identification of a region of Escherichia coli DnaB required for functional interaction with DnaG at the replication fork

The fundamental activities of the replicative primosomes of Escherichia coli are provided by DnaB, the replication fork DNA helicase, and DnaG, the Okazaki fragment primase. As we have demonstrated previously, DnaG is recruited to the replication fork via a transient protein-protein interaction with DnaB. Here, using site-directed amino acid mutagenesis, we have defined the region on DnaB required for this protein-protein interaction. Mutations in this region of DnaB affect the DnaB-DnaG interaction during both general priming-directed and phiX174 complementary strand DNA synthesis, as well as at replication forks reconstituted in rolling circle DNA replication reactions. The behavior of the purified mutant DnaB proteins in the various replication systems suggests that access to the DnaG binding pocket on DnaB may be restricted at the replication fork.

Characterization of the unique C terminus of the Escherichia coli tau DnaX protein. Monomeric C-tau binds alpha AND DnaB and can partially replace tau in reconstituted replication forks

A contact between the dimeric tau subunit within the DNA polymerase III holoenzyme and the DnaB helicase is required for replication fork propagation at physiologically-relevant rates (Kim, S., Dallmann, H. G., McHenry, C. S., and Marians, K. J. (1996) Cell 84, 643-650). In this report, we exploit the OmpT protease to generate C-tau, a protein containing only the unique C-terminal sequences of tau, free of the sequences shared with the alternative gamma frameshifting product of dnaX. We have established that C-tau is a monomer by sedimentation equilibrium and sedimentation velocity ultracentrifugation. Monomeric C-tau binds the alpha catalytic subunit of DNA polymerase III with a 1:1 stoichiometry. C-tau also binds DnaB, revealed by a coupled immunoblotting method. C-tau restores the rapid replication rate of inefficient forks reconstituted with only the gamma dnaX gene product. The acceleration of the DnaB helicase can be observed in the absence of primase, when only leading-strand replication occurs. This indicates that C-tau, bound only to the leading-strand polymerase, can trigger the conformational change necessary for DnaB to assume the fast, physiologically relevant form.

Suppression of a DnaX temperature-sensitive polymerization defect by mutation in the initiation gene, dnaA, requires functional oriC

Temperature sensitivity of DNA polymerization and growth, resulting from mutation of the tau and gamma subunits of Escherichia coli DNA polymerase III, are suppressed by Cs,Sx mutations of the initiator gene, dnaA. These mutations simultaneously cause defective initiation at 20 degrees C. Efficient suppression, defined as restoration of normal growth rate at 39 degrees C to essentially all the cells, depends on functional oriC. Increasing DnaA activity in a strain capable of suppression, by introducing a copy of the wild-type allele, increasing the suppressor gene dosage or introducing a seqA mutation, reversed the suppression. This suggests that the suppression mechanism depends on reduced activity of DnaACs, Sx. Models that assume that suppression results from an initiation defect or from DnaACs,Sx interaction with polymerization proteins during nascent strand synthesis are proposed.

PriA-directed replication fork restart in Escherichia coli

The encounter of a replication fork with either a damaged DNA template, a nick in the template strand or a 'frozen' protein-DNA complex can stall the replisome and cause it to fall apart. Such an event generates a requirement for replication fork restart if the cell is going to survive. Recent evidence shows that replication fork restart is effected by the action of the recombination proteins generating a substrate for PriA-directed replication fork assembly.

DNA polymerase III proofreading mutants enhance the expansion and deletion of triplet repeat sequences in Escherichia coli

The influence of mutations in the 3' to 5' exonucleolytic proofreading epsilon-subunit of Escherichia coli DNA polymerase III on the genetic instabilities of the CGG.CCG and the CTG.CAG repeats that cause human hereditary neurological diseases was investigated. The dnaQ49(ts) and the mutD5 mutations destabilize the CGG.CCG repeats. The distributions of the deletion products indicate that slipped structures containing a small number of repeats in the loop mediate the deletion process. The CTG.CAG repeats were destabilized by the dnaQ49(ts) mutation by a process mediated by long hairpin loop structures (>/=5 repeats). The mutD5 mutator strain stabilized the (CTG.CAG)(175) tract, which contained two interruptions. Since the mutD5 mutator strain has a saturated mismatch repair system, the stabilization is probably an indirect effect of the nonfunctional mismatch repair system in these strains. Shorter uninterrupted tracts expand readily in the mutD5 strain, presumably due to the greater stability of long CTG.CAG tracts (>100 repeats) in this strain. When parallel studies were conducted in minimal medium, where the mutD5 strain is defective in exonucleolytic proofreading but has a functional MMR system, both CTG.CAG and CGG.CCG repeats were destabilized, showing that the proofreading activity is essential for maintaining the integrity of TRS tracts. Thus, we conclude that the expansion and deletion of triplet repeats are enhanced by mutations that reduce the fidelity of replication.

Initiation of bidirectional replication at the chromosomal origin is directed by the interaction between helicase and primase

Several protein-protein interactions have been shown to be critical for proper replication fork function in Escherichia coli. These include interactions between the polymerase and the helicase, the helicase and the primase, and the primase and the polymerase. We have studied the influence of these interactions on proper initiation at oriC by using mutant primases defective in their interaction with the helicase and DNA polymerase III holoenzyme lacking the tau subunit so that it will not interact with the helicase. We show here that accurate initiation of bidirectional DNA replication from oriC is dependent on proper placement of the primers for leading strand synthesis and is thus governed primarily by the interaction between the helicase and primase.

Linkage map of Escherichia coli K-12, edition 10: the traditional map

This map is an update of the edition 9 map by Berlyn et al. (M. K. B. Berlyn, K. B. Low, and K. E. Rudd, p. 1715-1902, in F. C. Neidhardt et al., ed., Escherichia coli and Salmonella: cellular and molecular biology, 2nd ed., vol. 2, 1996). It uses coordinates established by the completed sequence, expressed as 100 minutes for the entire circular map, and adds new genes discovered and established since 1996 and eliminates those shown to correspond to other known genes. The latter are included as synonyms. An alphabetical list of genes showing map location, synonyms, the protein or RNA product of the gene, phenotypes of mutants, and reference citations is provided. In addition to genes known to correspond to gene sequences, other genes, often older, that are described by phenotype and older mapping techniques and that have not been correlated with sequences are included.

Identification of dnaX as a high-copy suppressor of the conditional lethal and partition phenotypes of the parE10 allele

Termination of DNA replication, complete topological unlinking of the parental template DNA strands, partition of the daughter chromosomes, and cell division follow in an ordered and interdependent sequence during normal bacterial growth. In Escherichia coli, topoisomerase IV (Topo IV), encoded by parE and parC, is responsible for decatenation of the two newly formed chromosomes. In an effort to uncover the pathway of information flow between the macromolecular processes that describe these events, we identified dnaX, encoding the tau and gamma subunits of the DNA polymerase III holoenzyme, as a high-copy suppressor of the temperature-sensitive phenotype of the parE10 allele. We show that suppression derives from overexpression of the gamma, but not the tau, subunit of the holoenzyme and that the partition defect of parE10 cells is nearly completely reverted at the nonpermissive temperature as well. These observations suggest a possible association between Topo IV and the replication machinery.

Role of the core DNA polymerase III subunits at the replication fork. Alpha is the only subunit required for processive replication

The DNA polymerase III holoenzyme is composed of 10 subunits. The core of the polymerase contains the catalytic polymerase subunit, alpha, the proofreading 3'-->5' exonuclease, epsilon, and a subunit of unknown function, theta. The availability of the holoenzyme subunits in purified form has allowed us to investigate their roles at the replication fork. We show here that of the three subunits in the core polymerase, only alpha is required to form processive replication forks that move at high rates and that exhibit coupled leading- and lagging-strand synthesis in vitro. Taken together with previous data this suggests that the primary determinant of replication fork processivity is the interaction between another holoenzyme subunit, tau, and the replication fork helicase, DnaB.

Replisome assembly reveals the basis for asymmetric function in leading and lagging strand replication

The E. coli replicase, DNA polymerase III holoenzyme, contains two polymerases for replication of duplex DNA. The DNA strands are antiparallel requiring different modes of replicating the two strands: one is continuous (leading) while the other is discontinuous (lagging). The two polymerases within holoenzyme are generally thought to have asymmetric functions for replication of these two strands. This report finds that the two polymerases have equal properties, both are capable of replicating the more difficult lagging strand. Asymmetric action is, however, imposed by the helicase that encircles the lagging strand. The helicase contact defines the leading polymerase constraining it to a subset of actions, while leaving the other to cycle on the lagging strand. The symmetric actions of the two polymerases free holoenzyme to assemble into the replisome in either orientation without concern for a correct match to one or the other strand.

tau couples the leading- and lagging-strand polymerases at the Escherichia coli DNA replication fork

Synthesis of an Okazaki fragment occurs once every 1 or 2 s at the Escherichia coli replication fork. To account for the rapid recycling required of the lagging-strand polymerase, it has been proposed that it is held at the replication fork by protein-protein interactions with the leading-strand polymerase as part of a dimeric polymerase assembly. Solution studies showed that the replicative polymerase, the DNA polymerase III holoenzyme, was indeed a dimer with two catalytic cores held together by the tau subunit. However, the functionality of this arrangement at the replication fork has never been demonstrated. We showed previously that the lagging-strand polymerase acted processively during multiple rounds of Okazaki fragment synthesis, i.e. the same polymerase core assembly synthesized each and every fragment made by the fork. Using extreme dilution of active replication forks and the isolation of protein-DNA complexes capable of supporting coupled leading- and lagging-strand synthesis, we demonstrate here that this coupling of leading- and lagging-strand synthesis is, in fact, mediated by the tau subunit of the holoenzyme acting as a physical bridge between the core assemblies synthesizing the leading and lagging strands.

Identification of the beta-binding domain of the alpha subunit of Escherichia coli polymerase III holoenzyme

Rapid and processive DNA synthesis by Escherichia coli DNA polymerase III holoenzyme is achieved by the direct interaction between the alpha subunit of DNA polymerase III core and the beta sliding clamp (LaDuca, R. J., Crute, J. J., McHenry, C. S., and Bambara, R. A. (1986) J. Biol. Chem. 261, 7550-7557; Stukenberg, T. P., Studwell-Vaughan, P. S., and O'Donnell, M. (1991) J. Biol. Chem. 266, 11328-11334). In this study, we localized the beta-binding domain of alpha to a carboxyl-terminal region by quantifying the interaction of beta with a series of alpha deletion proteins. Purification and binding analysis was facilitated by insertion of hexahistidine and short biotinylation sequences on the deletion terminus of alpha. Interaction of beta with alpha deletion proteins was studied by gel filtration and surface plasmon resonance. alpha lacking 169 COOH-terminal residues still possessed beta-binding activity; whereas deletion of 342 amino acids from the COOH terminus abolished beta binding. Deletion of 542 amino acids from the NH2 terminus of the 1160 residue alpha subunit resulted in a protein that bound beta 10-20-fold more strongly than native alpha. Hence, portions of alpha between residues 542 and 991 are involved in beta binding. DNA binding to alpha apparently triggers an increased affinity for beta (Naktinis, V., Turner, J., and O'Donnell, M. (1996) Cell 84, 137-145). Our findings extend this observation by implicating the amino-terminal polymerase domain in inducing a low affinity taut conformation in the carboxyl-terminal beta-binding domain. Deletion of the polymerase domain (or, presumably, its occupancy by DNA) relaxes the COOH-terminal domain, permitting it to assume a conformation with high affinity for beta.

In vivo assembly of overproduced DNA polymerase III. Overproduction, purification, and characterization of the alpha, alpha-epsilon, and alpha-epsilon-theta subunits

The genes for the polymerase core (alphaepsilontheta) of the DNA polymerase III holoenzyme map to widely separated loci on the Escherichia coli chromosome. To enable efficient overproduction and in vivo assembly of DNA polymerase III core, artificial operons containing the three structural genes, dnaE, dnaQ, and holE, were placed in an expression plasmid. The proteins alpha, alphaepsilon and alphaepsilontheta were overexpressed and assembled in E. coli and purified to homogeneity. The three purified polymerases had a similar specific activity of about 6.0 x 10(6) units/mg in a gap-filling assay. Kinetics studies showed that neither epsilon nor theta influenced the Km of alpha for deoxynucleotide triphosphate and only slightly decreased the Km of alpha for DNA, although epsilon was absolutely required for maximal DNA synthesis. The rate of DNA synthesis by alpha-reconstituted holoenzyme using tau complex was about 5-fold less than that of alphaepsilon or alphaepsilontheta-reconstituted holoenzyme as determined by a gel analysis. The processivity of alpha-reconstituted holoenzyme was very similar to that of alphaepsilontheta-reconstituted holoenzyme when tau complex was used as a clamp loader.

Coupling of a replicative polymerase and helicase: a tau-DnaB interaction mediates rapid replication fork movement

The E. coli replication fork synthesizes DNA at the rate of nearly 1000 nt/s. We show here that an interaction between the tau subunit of the replicative polymerase (the DNA polymerase III holoenzyme) and the replication fork DNA helicase (DnaB) is required to mediate this high rate of replication fork movement. In the absence of this interaction, the polymerase follows behind the helicase at a rate equal to the slow (approximately 35 nt/s) unwinding rate of the helicase alone, whereas upon establishing a tau-DnaB contact, DnaB becomes a more effective helicase, increasing its translocation rate by more than 10-fold. This finding establishes the existence of both a physical and communications link between the two major replication machines in the replisome: the DNA polymerase and the primosome.