Alteration of the substrate specificity of the malonyl-CoA/acetyl-CoA:acyl carrier protein S-acyltransferase domain of the multifunctional fatty acid synthase by mutation of a single arginine residue

Convergent evolution of parrot plumage coloration

Parrots have remarkable plumage coloration that result in part from a unique ability to produce pigments called psittacofulvins that yield yellow to red feather colors. Little is known about the evolution of psittacofulvin-based pigmentation. Widespread color mutations of captive-bred parrots provide perfect opportunities to study the genetic basis of this trait. An earlier study on blue budgerigars, which do not possess psittacofulvins, reveals the involvement of an uncharacterized polyketide synthase (MuPKS) in yellow psittacofulvin synthesis. The blue phenotype had repeatedly appeared in different parrot species, similar to independent experimental replications allowing the study of convergent evolution and molecular mechanism of psittacofulvin-based pigmentation. Here, we investigated the genetic basis of the blue phenotypes in two species of Agapornis parrots, Fischer's lovebird (A. fischeri) and Yellow-collared lovebird (A. personatus). Using whole-genome data, we identified a single genomic region with size <2 Mb to be strongly associated with the color difference between blue and wild-type (WT) birds in both species. Surprisingly, we discovered that the mutation associated with the blue Agapornis phenotype was identical to the previously described substitution causing the functional change of MuPKS in budgerigars. Together with the evidence of shared blue-associated haplotypes and signatures of a selective sweep in this genomic region in both species, we demonstrated both de novo mutation and interspecific introgression play a role in the evolution of this trait in different Agapornis species. The convergent substitution in the same gene in both lovebirds and budgerigars also indicates a strong evolutionary constraint on psittacofulvin-based coloration.

Animal Fatty Acid Synthase: A Chemical Nanofactory

Fatty acids are crucial molecules for most living beings, very well spread and conserved across species. These molecules play a role in energy storage, cell membrane architecture, and cell signaling, the latter through their derivative metabolites. De novo synthesis of fatty acids is a complex chemical process that can be achieved either by a metabolic pathway built by a sequence of individual enzymes, such as in most bacteria, or by a single, large multi-enzyme, which incorporates all the chemical capabilities of the metabolic pathway, such as in animals and fungi, and in some bacteria. Here we focus on the multi-enzymes, specifically in the animal fatty acid synthase (FAS). We start by providing a historical overview of this vast field of research. We follow by describing the extraordinary architecture of animal FAS, a homodimeric multi-enzyme with seven different active sites per dimer, including a carrier protein that carries the intermediates from one active site to the next. We then delve into this multi-enzyme's detailed chemistry and critically discuss the current knowledge on the chemical mechanism of each of the steps necessary to synthesize a single fatty acid molecule with atomic detail. In line with this, we discuss the potential and achieved FAS applications in biotechnology, as biosynthetic machines, and compare them with their homologous polyketide synthases, which are also finding wide applications in the same field. Finally, we discuss some open questions on the architecture of FAS, such as their peculiar substrate-shuttling arm, and describe possible reasons for the emergence of large megasynthases during evolution, questions that have fascinated biochemists from long ago but are still far from answered and understood.

Computational studies on the substrate specificity of an acyltransferase domain from salinomycin polyketide synthase

The complex of SalAT14 and its cognate substrate EMCoA is apt to stay in a conformation suitable for the reaction. Computational investigations reveal the structural basis of AT specificity and could potentially help the engineering of modular PKSs.

Type I fatty acid synthase trapped in the octanoyl-bound state

De novo fatty acid biosynthesis in humans is accomplished by a multidomain protein, the Type I fatty acid synthase (FAS). Although ubiquitously expressed in all tissues, fatty acid synthesis is not essential in normal healthy cells due to sufficient supply with fatty acids by the diet. However, FAS is overexpressed in cancer cells and correlates with tumor malignancy, which makes FAS an attractive selective therapeutic target in tumorigenesis. Herein, we present a crystal structure of the condensing part of murine FAS, highly homologous to human FAS, with octanoyl moieties covalently bound to the transferase (MAT—malonyl‐/acetyltransferase) and the condensation (KS—β‐ketoacyl synthase) domain. The MAT domain binds the octanoyl moiety in a novel (unique) conformation, which reflects the pronounced conformational dynamics of the substrate‐binding site responsible for the MAT substrate promiscuity. In contrast, the KS binding pocket just subtly adapts to the octanoyl moiety upon substrate binding. Besides the rigid domain structure, we found a positive cooperative effect in the substrate binding of the KS domain by a comprehensive enzyme kinetic study. These structural and mechanistic findings contribute significantly to our understanding of the mode of action of FAS and may guide future rational inhibitor designs.

Interfacial plasticity facilitates high reaction rate of E. coli FAS malonyl-CoA:ACP transacylase, FabD

Fatty acid synthases (FASs) and polyketide synthases (PKSs) iteratively elongate and often reduce two-carbon ketide units in de novo fatty acid and polyketide biosynthesis. Cycles of chain extensions in FAS and PKS are initiated by an acyltransferase (AT), which loads monomer units onto acyl carrier proteins (ACPs), small, flexible proteins that shuttle covalently linked intermediates between catalytic partners. Formation of productive ACP-AT interactions is required for catalysis and specificity within primary and secondary FAS and PKS pathways. Here, we use the Escherichia coli FAS AT, FabD, and its cognate ACP, AcpP, to interrogate type II FAS ACP-AT interactions. We utilize a covalent crosslinking probe to trap transient interactions between AcpP and FabD to elucidate the X-ray crystal structure of a type II ACP-AT complex. Our structural data are supported using a combination of mutational, crosslinking, and kinetic analyses, and long-timescale molecular dynamics (MD) simulations. Together, these complementary approaches reveal key catalytic features of FAS ACP-AT interactions. These mechanistic inferences suggest that AcpP adopts multiple, productive conformations at the AT binding interface, allowing the complex to sustain high transacylation rates. Furthermore, MD simulations support rigid body subdomain motions within the FabD structure that may play a key role in AT activity and substrate selectivity.

Acyl-coenzyme A:(holo-acyl carrier protein) transacylase enzymes as templates for engineering

This review will cover the structure, enzymology, and related aspects that are important for structure-based engineering of the transacylase enzymes from fatty acid biosynthesis and polyketide synthesis. Furthermore, this review will focus on in vitro characteristics and not cover engineering of the upstream or downstream reactions or strategies to manipulate metabolic flux in vivo. The malonyl-coenzyme A(CoA)-holo-acyl-carrier protein (holo-ACP) transacylase (FabD) from Escherichia coli serves as a model for this enzyme with thorough descriptions of structure, enzyme mechanism, and effects of mutation on substrate binding presented in the literature. Here, we discuss multiple practical and theoretical considerations regarding engineering transacylase enzymes to accept non-cognate substrates and form novel acyl-ACPs for downstream reactions.

Characterization of the Polyspecific Transferase of Murine Type I Fatty Acid Synthase (FAS) and Implications for Polyketide Synthase (PKS) Engineering

Fatty acid synthases (FASs) and polyketide synthases (PKSs) condense acyl compounds to fatty acids and polyketides, respectively. Both, FASs and PKSs, harbor acyltransferases (ATs), which select substrates for condensation by β-ketoacyl synthases (KSs). Here, we present the structural and functional characterization of the polyspecific malonyl/acetyltransferase (MAT) of murine FAS. We assign kinetic constants for the transacylation of the native substrates, acetyl- and malonyl-CoA, and demonstrate the promiscuity of FAS to accept structurally and chemically diverse CoA-esters. X-ray structural data of the KS-MAT didomain in a malonyl-loaded state suggests a MAT-specific role of an active site arginine in transacylation. Owing to its enzymatic properties and its accessibility as a separate domain, MAT of murine FAS may serve as versatile tool for engineering PKSs to provide custom-tailored access to new polyketides that can be applied in antibiotic and antineoplastic therapy.

Genetic Mapping and Biochemical Basis of Yellow Feather Pigmentation in Budgerigars

Parrot feathers contain red, orange, and yellow polyene pigments called psittacofulvins. Budgerigars are parrots that have been extensively bred for plumage traits during the last century, but the underlying genes are unknown. Here we use genome-wide association mapping and gene-expression analysis to map the Mendelian blue locus, which abolishes yellow pigmentation in the budgerigar. We find that the blue trait maps to a single amino acid substitution (R644W) in an uncharacterized polyketide synthase (MuPKS). When we expressed MuPKS heterologously in yeast, yellow pigments accumulated. Mass spectrometry confirmed that these yellow pigments match those found in feathers. The R644W substitution abolished MuPKS activity. Furthermore, gene-expression data from feathers of different bird species suggest that parrots acquired their colors through regulatory changes that drive high expression of MuPKS in feather epithelia. Our data also help formulate biochemical models that may explain natural color variation in parrots. VIDEO ABSTRACT.

Engineering fungal de novo fatty acid synthesis for short chain fatty acid production

Fatty acids (FAs) are considered strategically important platform compounds that can be accessed by sustainable microbial approaches. Here we report the reprogramming of chain-length control of Saccharomyces cerevisiae fatty acid synthase (FAS). Aiming for short-chain FAs (SCFAs) producing baker's yeast, we perform a highly rational and minimally invasive protein engineering approach that leaves the molecular mechanisms of FASs unchanged. Finally, we identify five mutations that can turn baker's yeast into a SCFA producing system. Without any further pathway engineering, we achieve yields in extracellular concentrations of SCFAs, mainly hexanoic acid (C₆-FA) and octanoic acid (C₈-FA), of 464 mg l⁻¹ in total. Furthermore, we succeed in the specific production of C₆- or C₈-FA in extracellular concentrations of 72 and 245 mg l⁻¹, respectively. The presented technology is applicable far beyond baker's yeast, and can be plugged into essentially all currently available FA overproducing microorganisms.

The production of short chain fatty acids by microorganisms has numerous industrial and biofuel applications. Here the authors reprogramme S. cerevisiae fatty acid synthase with five mutations to produce C6- and C8-fatty acids and identify thioesterases responsible for hydrolysis of short chain acyl-CoA hydrolysis.

Engineering fatty acid synthases for directed polyketide production

In this study, we engineered fatty acid synthases (FAS) for the biosynthesis of short-chain fatty acids and polyketides, guided by a combined in vitro and in silico approach. Along with exploring the synthetic capability of FAS, we aim to build a foundation for efficient protein engineering, with the specific goal of harnessing evolutionarily related megadalton-scale polyketide synthases (PKS) for the tailored production of bioactive natural compounds.

Acyl hydrolases from trans-AT polyketide synthases target acetyl units on acyl carrier proteins

Acyl hydrolase (AH) domains are a common feature of trans-AT PKSs. They have been hypothesised to perform a proofreading function by removing acyl chains from stalled sites. This study determines the substrate tolerance of the AH PedC for a range of acyl-ACPs. Clear preference towards short, linear acyl-ACPs is shown, with acetyl-ACP the best substrate. These results imply a more targeted housekeeping role for PedC: namely the removal of unwanted acetyl groups from ACP domains caused by erroneous transfer of acetyl-CoA, or possibly by decarboxylation of malonyl-ACP.

Structural and functional analysis of the loading acyltransferase from avermectin modular polyketide synthase

The loading acyltransferase (AT) domains of modular polyketide synthases (PKSs) control the choice of starter units incorporated into polyketides and are therefore attractive targets for the engineering of modular PKSs. Here, we report the structural and biochemical characterizations of the loading AT from avermectin modular PKS, which accepts more than 40 carboxylic acids as alternative starter units for the biosynthesis of a series of congeners. This first structural analysis of loading ATs from modular PKSs revealed the molecular basis for the relaxed substrate specificity. Residues important for substrate binding and discrimination were predicted by modeling a substrate into the active site. A mutant with altered specificity toward a panel of synthetic substrate mimics was generated by site-directed mutagenesis of the active site residues. The hydrolysis of the N-acetylcysteamine thioesters of racemic 2-methylbutyric acid confirmed the stereospecificity of the avermectin loading AT for an S configuration at the C-2 position of the substrate. Together, these results set the stage for region-specific modification of polyketides through active site engineering of loading AT domains of modular PKSs.

Computational Methods for Identification of Novel Secondary Metabolite Biosynthetic Pathways by Genome Analysis

Secondary metabolites belonging to polyketide and nonribosomal peptide families constitute a major class of natural products with diverse biological functions and a variety of pharmaceutically important properties. Experimental studies have shown that the biosynthetic machinery for polyketide and nonribosomal peptides involves multi-functional megasynthases like Polyketide Synthases (PKSs) and nonribosomal peptide synthetases (NRPSs) which utilize a thiotemplate mechanism similar to that for fatty acid biosynthesis. Availability of complete genome sequences for an increasing number of microbial organisms has provided opportunities for using in silico genome mining to decipher the secondary metabolite natural product repertoire encoded by these organisms. Therefore, in recent years there have been major advances in development of computational methods which can analyze genome sequences to identify genes involved in secondary metabolite biosynthesis and help in deciphering the putative chemical structures of their biosynthetic products based on analysis of the sequence and structural features of the proteins encoded by these genes. These computational methods for deciphering the secondary metabolite biosynthetic code essentially involve identification of various catalytic domains present in this PKS/NRPS family of enzymes; a prediction of various reactions in these enzymatic domains and their substrate specificities and also precise identification of the order in which these domains would catalyze various biosynthetic steps. Structural bioinformatics analysis of known secondary metabolite biosynthetic clusters has helped in formulation of predictive rules for deciphering domain organization, substrate specificity, and order of substrate channeling. In this chapter, the progress in development of various computational methods is discussed by different research groups, and specifically, the utility in identification of novel metabolites by genome mining and rational design of natural product analogs by biosynthetic engineering studies.

Structural analysis of protein-protein interactions in type I polyketide synthases

Polyketide synthases (PKSs) are responsible for synthesizing a myriad of natural products with agricultural, medicinal relevance. The PKSs consist of multiple functional domains of which each can catalyze a specified chemical reaction leading to the synthesis of polyketides. Biochemical studies showed that protein-substrate and protein-protein interactions play crucial roles in these complex regio-/stereo-selective biochemical processes. Recent developments on X-ray crystallography and protein NMR techniques have allowed us to understand the biosynthetic mechanism of these enzymes from their structures. These structural studies have facilitated the elucidation of the sequence-function relationship of PKSs and will ultimately contribute to the prediction of product structure. This review will focus on the current knowledge of type I PKS structures and the protein-protein interactions in this system.

Interrogation of global active site occupancy of a fungal iterative polyketide synthase reveals strategies for maintaining biosynthetic fidelity

Nonreducing iterative polyketide synthases (NR-PKSs) are responsible for assembling the core of fungal aromatic natural products with diverse biological properties. Despite recent advances in the field, many mechanistic details of polyketide assembly by these megasynthases remain unknown. To expand our understanding of substrate loading, polyketide elongation, cyclization, and product release, active site occupancy and product output were explored by Fourier transform mass spectrometry using the norsolorinic acid anthrone-producing polyketide synthase, PksA, from the aflatoxin biosynthetic pathway in Aspergillus parasiticus. Here we report the simultaneous observation of covalent intermediates from all catalytic domains of PksA from in vitro reconstitution reactions. The data provide snapshots of iterative catalysis and reveal an underappreciated editing function for the C-terminal thioesterase domain beyond its recently established synthetic role in Claisen/Dieckmann cyclization and product release. The specificity of thioesterase catalyzed hydrolysis was explored using biosynthetically relevant protein-bound and small molecule acyl substrates and demonstrated activity against hexanoyl and acetyl, but not malonyl. Processivity of polyketide extension was supported by the inability of a nonhydrolyzable malonyl analog to trap products of intermediate chain lengths and by the detection of only fully extended species observed covalently bound to, and as the predominant products released by, PksA. High occupancy of the malonyl transacylase domain and fast relative rate of malonyl transfer compared to starter unit transfer indicate that rapid loading of extension units onto the carrier domain facilitates efficient chain extension in a manner kinetically favorable to ultimate product formation.

The Catalytic Diversity of Multimodular Polyketide Synthases: Natural Product Biosynthesis Beyond Textbook Assembly Rules

Bacterial multimodular polyketide synthases (PKSs) are responsible for the biosynthesis of a wide range of pharmacologically active natural products. These megaenzymes contain numerous catalytic and structural domains and act as biochemical templates to generate complex polyketides in an assembly line-like fashion. While the prototypical PKS is composed of only a few different domain types that are fused together in a combinatorial fashion, an increasing number of enzymes is being found that contain additional components. These domains can introduce remarkably diverse modifications into polyketides. This review discusses our current understanding of such noncanonical domains and their role in expanding the biosynthetic versatility of bacterial PKSs.

Structure and function of eukaryotic fatty acid synthases

In all organisms, fatty acid synthesis is achieved in variations of a common cyclic reaction pathway by stepwise, iterative elongation of precursors with two-carbon extender units. In bacteria, all individual reaction steps are carried out by monofunctional dissociated enzymes, whereas in eukaryotes the fatty acid synthases (FASs) have evolved into large multifunctional enzymes that integrate the whole process of fatty acid synthesis. During the last few years, important advances in understanding the structural and functional organization of eukaryotic FASs have been made through a combination of biochemical, electron microscopic and X-ray crystallographic approaches. They have revealed the strikingly different architectures of the two distinct types of eukaryotic FASs, the fungal and the animal enzyme system. Fungal FAS is a 2·6 MDa α₆β₆ heterododecamer with a barrel shape enclosing two large chambers, each containing three sets of active sites separated by a central wheel-like structure. It represents a highly specialized micro-compartment strictly optimized for the production of saturated fatty acids. In contrast, the animal FAS is a 540 kDa X-shaped homodimer with two lateral reaction clefts characterized by a modular domain architecture and large extent of conformational flexibility that appears to contribute to catalytic efficiency.

Structural basis for different specificities of acyltransferases associated with the human cytosolic and mitochondrial fatty acid synthases

Animals employ two systems for the de novo biosynthesis of fatty acids: a megasynthase complex in the cytosol (type I) that produces mainly palmitate, and an ensemble of freestanding enzymes in the mitochondria (type II) that produces mainly octanoyl moieties. The acyltransferases responsible for initiation of fatty acid biosynthesis in the two compartments are distinguished by their different substrate specificities: the type I enzyme transfers both the acetyl primer and the malonyl chain extender, whereas the type II enzyme is responsible for translocation of only the malonyl substrate. Crystal structures for the type I and II enzymes, supported by in silico substrate docking studies and mutagenesis experiments that alter their respective specificities, reveal that, although the two enzymes adopt a similar overall fold, subtle differences at their catalytic centers account for their different specificities.

Structural enzymology of polyketide synthases

This chapter describes structural and associated enzymological studies of polyketide synthases, including isolated single domains and multidomain fragments. The sequence-structure-function relationship of polyketide biosynthesis, compared with homologous fatty acid synthesis, is discussed in detail. Structural enzymology sheds light on sequence and structural motifs that are important for the precise timing, substrate recognition, enzyme catalysis, and protein-protein interactions leading to the extraordinary structural diversity of naturally occurring polyketides.

The crystal structure of a mammalian fatty acid synthase

Mammalian fatty acid synthase is a large multienzyme that catalyzes all steps of fatty acid synthesis. We have determined its crystal structure at 3.2 angstrom resolution covering five catalytic domains, whereas the flexibly tethered terminal acyl carrier protein and thioesterase domains remain unresolved. The structure reveals a complex architecture of alternating linkers and enzymatic domains. Substrate shuttling is facilitated by flexible tethering of the acyl carrier protein domain and by the limited contact between the condensing and modifying portions of the multienzyme, which are mainly connected by linkers rather than direct interaction. The structure identifies two additional nonenzymatic domains: (i) a pseudo-ketoreductase and (ii) a peripheral pseudo-methyltransferase that is probably a remnant of an ancestral methyltransferase domain maintained in some related polyketide synthases. The structural comparison of mammalian fatty acid synthase with modular polyketide synthases shows how their segmental construction allows the variation of domain composition to achieve diverse product synthesis.

The type I fatty acid and polyketide synthases: a tale of two megasynthases

This review chronicles the synergistic growth of the fields of fatty acid and polyketide synthesis over the last century. In both animal fatty acid synthases and modular polyketide synthases, similar catalytic elements are covalently linked in the same order in megasynthases. Whereas in fatty acid synthases the basic elements of the design remain immutable, guaranteeing the faithful production of saturated fatty acids, in the modular polyketide synthases, the potential of the basic design has been exploited to the full for the elaboration of a wide range of secondary metabolites of extraordinary structural diversity.

Biochemical characterization of the minimal polyketide synthase domains in the lovastatin nonaketide synthase LovB

The biosynthesis of lovastatin in Aspergillus terreus requires two megasynthases. The lovastatin nonaketide synthase, LovB, synthesizes the intermediate dihydromonacolin L using nine malonyl-coenzyme A molecules, and is a reducing, iterative type I polyketide synthase. The iterative type I polyketide synthase is mechanistically different from bacterial type I polyketide synthases and animal fatty acid synthases. We have cloned the minimal polyketide synthase domains of LovB as standalone proteins and assayed their activities and substrate specificities. The didomain proteins ketosynthase-malonyl-coenzyme A:acyl carrier protein acyltransferase (KS-MAT) and acyl carrier protein-condensation (ACP-CON) domain were expressed solubly in Escherichia coli. The monodomains MAT, ACP and CON were also obtained as soluble proteins. The MAT domain can be readily labeled by [1,2-(14)C]malonyl-coenzyme A and can transfer the acyl group to both the cognate LovB ACP and heterologous ACPs from bacterial type I and type II polyketide synthases. Using the LovB ACP-CON didomain as an acyl acceptor, LovB MAT transferred malonyl and acetyl groups with k(cat)/K(m) values of 0.62 min(-1).mum(-1) and 0.032 min(-1).mum(-1), respectively. The LovB MAT domain was able to substitute the Streptomyces coelicolor FabD in supporting product turnover in a bacterial type II minimal polyketide synthase assay. The activity of the KS domain was assayed independently using a KS-MAT (S656A) mutant in which the MAT domain was inactivated. The KS domain displayed no activity towards acetyl groups, but was able to recognize malonyl groups in the absence of cerulenin. The relevance of these finding to the priming mechanism of fungal polyketide synthase is discussed.

The crystal structure of yeast fatty acid synthase, a cellular machine with eight active sites working together

In yeast, the whole metabolic pathway for making 16- and 18-carbon fatty acids is carried out by fatty acid synthase, a 2.6 megadalton molecular-weight macromolecular assembly containing six copies of all eight catalytic centers. We have determined its crystal structure, which illuminates how this enzyme is initially activated and then carries out multiple steps of synthesis in each of six sterically isolated reaction chambers. Six of the catalytic sites are in the wall of the assembly facing an acyl carrier protein (ACP) bound to the ketoacyl synthase domain. Two-dimensional diffusion of substrates to the catalytic sites may be achieved by the electrostatically negative ACP swinging to each of the six electrostatically positive catalytic sites. The phosphopantetheinyl transferase domain lies outside the shell of the assembly, inaccessible to ACP that lies inside, suggesting that the attachment of the pantetheine arm to ACP must occur before complete assembly of the complex.

Structure of fungal fatty acid synthase and implications for iterative substrate shuttling

We report crystal structures of the 2.6-megadalton alpha6beta6 heterododecameric fatty acid synthase from Thermomyces lanuginosus at 3.1 angstrom resolution. The alpha and beta polypeptide chains form the six catalytic domains required for fatty acid synthesis and numerous expansion segments responsible for extensive intersubunit connections. Detailed views of all active sites provide insights into substrate specificities and catalytic mechanisms and reveal their unique characteristics, which are due to the integration into the multienzyme. The mode of acyl carrier protein attachment in the reaction chamber, together with the spatial distribution of active sites, suggests that iterative substrate shuttling is achieved by a relatively restricted circular motion of the carrier domain in the multifunctional enzyme.

The ubiquitous carrier protein--a window to metabolite biosynthesis

Nature has developed a remarkable strategy to isolate metabolites from the milieu of the cell for chemical modification through the use of carrier proteins. Common to both primary and secondary metabolic pathways, acyl-carrier proteins constitute a conserved protein architecture which mediate the biosynthesis of a variety of metabolic products. Analogies have been made between the carrier protein and solid phase resin for chemical synthesis, as both entities provide a mechanism to separate compounds of interest from complex mixtures for selective chemical modification. However, there is significantly more to the carrier protein than an attachment point. In this review, we aim to systematically characterize the role of carrier proteins in various metabolic pathways and outline their utility in biosynthesis and biotechnology; 185 references are cited.

A High-throughput two-phase partition assay to measure the activity of lipid-metabolizing enzymes

A new method to measure the activity of lipid-metabolizing enzymes is described. Subsequent to an enzymatic reaction, a two-phase system (organic/aqueous) is established by the addition of a phase partition scintillation fluid (PPSF). The PPSF serves as a scintillation fluid, a phase partition agent, and a carrier/separator of an organic-soluble radiolabeled reaction substrate or product. Applying an empirically derived set of conditions typically enhances the separation of substrate from product whereby one species is effectively solubilized in the PPSF. In situ partitioning of the radionuclide-containing organic/lipid phase from the aqueous phase occurs within individual wells of 96-well or 384-well density PPSF-resistant microtiter plates without the requirement for multiple organic solvent extractions and aspirations, making this method applicable to high-throughput screening. The utility of this method for both kinetic characterization and high-throughput screening is demonstrated with acetyl-CoA carboxylase and fatty acid synthase.

The biosynthesis, molecular genetics and enzymology of the polyketide-derived metabolites

This review covers the biosynthesis of aliphatic and aromatic polyketides as well as mixed polyketide/NRPS metabolites, and discusses the molecular genetics and enzymology of the proteins responsible for their formation.

Dissecting the mechanism and assembly of a complex virulence mycobacterial lipid

Mycobacterium tuberculosis cell envelope is a treasure house of biologically active lipids of fascinating molecular architecture. Although genetic studies have alluded to an array of genes in biosynthesis of complex lipids, their mechanistic, structural, and biochemical principles have not been investigated. Here, we have dissected the molecular logic underlying the biosynthesis of a virulence lipid phthiocerol dimycocerosate (PDIM). Cell-free reconstitution studies demonstrate that polyketide synthases, which are usually involved in the biosynthesis of secondary metabolites, are responsible for generating complex lipids in mycobacteria. We show that PapA5 protein directly transfers the protein bound mycocerosic acid analogs on phthiocerol to catalyze the final esterification step. Based on precise identification of biological functions of proteins from Pps cluster, we have rationally produced a nonmethylated variant of mycocerosate esters. Apart from elucidating mechanisms that generate chemical heterogeneity with PDIMs, this study also presents an attractive approach to explore host-pathogen interactions by altering mycobacterial surface coat.

Biosynthesis of nonribosomal peptides1

Bacteria and fungi use large multifunctional enzymes, the so-called nonribosomal peptide synthetases (NRPSs), to produce peptides of broad structural and biological activity. Biochemical studies have contributed substantially to the understanding of the key principles of these modular enzymes that can draw on a much larger number of catalytic tools for the incorporation of unusual features compared with the ribosomal system. Several crystal structures of NRPS-domains have yielded deep insight into the catalytic mechanisms involved and have led to a better prediction of the products assembled and to the construction of hybrid enzymes. In addition to the structure-function relationship of the core- and tailoring-domains of NRPSs, which is the main focus of this review, different biosynthetic strategies and essential enzymes for posttranslational modification and editing are discussed.

Structure and function of animal fatty acid synthase

Fatty acid synthase (FAS; EC 2.3.1.85) of animal tissues is a complex multifunctional enzyme consisting of two identical monomers. The FAS monomer (approximately 270 kDa) contains six catalytic activities and from the N-terminus the order is beta-ketoacyl synthase (KS), acetyl/malonyl transacylase (AT/MT), beta-hydroxyacyl dehydratase (DH), enoyl reductase (ER), beta-ketoacyl reductase (KR), acyl carrier protein (ACP), and thioesterase (TE). Although the FAS monomer contains all the activities needed for palmitate synthesis, only the dimer form of the synthase is functional. Both the biochemical analyses and the small-angle neutron-scattering analysis determined that in the dimer form of the enzyme the monomers are arranged in a head-to-tail manner generating two centers for palmitate synthesis. Further, these analyses also suggested that the component activities of the monomer are organized in three domains. Domain I contains KS, AT/MT, and DH, domain II contains ER, KR, and ACP, and domain III contains TE. Approximately one fourth of the monomer protein located between domains I and II contains no catalytic activities and is called the interdomain/core region. This region plays an important role in the dimer formation. Electron cryomicrographic analyses of FAS revealed a quaternary structure at approximately 19 A resolution, containing two monomers (180 x 130 x 75 A) that are separated by about 19 A, and arranged in an antiparallel fashion, which is consistent with biochemical and neutron-scattering data. The monomers are connected at the middle by a hinge generating two clefts that may be the two active centers of fatty acid synthesis. Normal mode analysis predicted that the intersubunit hinge region and the intrasubunit hinge located between domains II and III are highly flexible. Analysis of FAS particle images by using a simultaneous multiple model single particle refinement method confirmed that FAS structure exists in various conformational states. Attempts to get higher resolution of the structure are under way.

The enzymology of combinatorial biosynthesis

Combinatorial biosynthesis involves the genetic manipulation of natural product biosynthetic enzymes to produce potential new drug candidates that would otherwise be difficult to obtain. In either a theoretical or practical sense, the number of combinations possible from different types of natural product pathways ranges widely. Enzymes that have been the most amenable to this technology synthesize the polyketides, nonribosomal peptides, and hybrids of the two. The number of polyketide or peptide natural products theoretically possible is huge, but considerable work remains before these large numbers can be realized. Nevertheless, many analogs have been created by this technology, providing useful structure-activity relationship data and leading to a few compounds that may reach the clinic in the next few years. In this review the focus is on recent advances in our understanding of how different enzymes for natural product biosynthesis can be used successfully in this technology.

Cloning, expression, characterization, and interaction of two components of a human mitochondrial fatty acid synthase. Malonyltransferase and acyl carrier protein

The possibility that human cells contain, in addition to the cytosolic type I fatty acid synthase complex, a mitochondrial type II malonyl-CoA-dependent system for the biosynthesis of fatty acids has been examined by cloning, expressing, and characterizing two putative components. Candidate coding sequences for a malonyl-CoA:acyl carrier protein transacylase (malonyltransferase) and its acyl carrier protein substrate, identified by BLAST searches of the human sequence data base, were located on nuclear chromosomes 22 and 16, respectively. The encoded proteins localized exclusively in mitochondria only when the putative N-terminal mitochondrial targeting sequences were present as revealed by confocal microscopy of HeLa cells infected with appropriate green fluorescent protein fusion constructs. The mature, processed forms of the mitochondrial proteins were expressed in Sf9 cells and purified, the acyl carrier protein was converted to the holoform in vitro using purified human phosphopantetheinyltransferase, and the functional interaction of the two proteins was studied. Compared with the dual specificity malonyl/acetyltransferase component of the cytosolic type I fatty acid synthase, the type II mitochondrial counterpart exhibits a relatively narrow substrate specificity for both the acyl donor and acyl carrier protein acceptor. Thus, it forms a covalent acyl-enzyme complex only when incubated with malonyl-CoA and transfers exclusively malonyl moieties to the mitochondrial holoacyl carrier protein. The type II acyl carrier protein from Bacillus subtilis, but not the acyl carrier protein derived from the human cytosolic type I fatty acid synthase, can also function as an acceptor for the mitochondrial transferase. These data provide compelling evidence that human mitochondria contain a malonyl-CoA/acyl carrier protein-dependent fatty acid synthase system, distinct from the type I cytosolic fatty acid synthase, that resembles the type II system present in prokaryotes and plastids. The final products of this system, yet to be identified, may play an important role in mitochondrial function.

Structural and functional organization of the animal fatty acid synthase

The entire pathway of palmitate synthesis from malonyl-CoA in mammals is catalyzed by a single, homodimeric, multifunctional protein, the fatty acid synthase. Each subunit contains three N-terminal domains, the beta-ketoacyl synthase, malonyl/acetyl transferase and dehydrase separated by a structural core from four C-terminal domains, the enoyl reductase, beta-ketoacyl reductase, acyl carrier protein and thiosterase. The kinetics and specificities of the substrate loading reaction catalyzed by the malonyl/acetyl transferase, the condensation reaction catalyzed by beta-ketoacyl synthase and chain-terminating reaction catalyzed by the thioesterase ensure that intermediates do not leak off the enzyme, saturated chains exclusively are elongated and palmitate is released as the major product. Only in the fatty acid synthase dimer do the subunits adopt conformations that facilitate productive coupling of the individual reactions for fatty acid synthesis at the two acyl carrier protein centers. Introduction of a double tagging and dual affinity chromatographic procedure has permitted the engineering and isolation of heterodimeric fatty acid synthases carrying different mutations on each subunit. Characterization of these heterodimers, by activity assays and chemical cross-linking, has been exploited to map the functional topology of the protein. The results reveal that the two acyl carrier protein domains engage in substrate loading and condensation reactions catalyzed by the malonyl/acetyl transferase and beta-ketoacyl synthase domains of either subunit. In contrast, the reactions involved in processing of the beta-carbon atom, following each chain elongation step, together with the release of palmitate, are catalyzed by the cooperation of the acyl carrier protein with catalytic domains of the same subunit. These findings suggest a revised model for the fatty acid synthase in which the two polypeptides are oriented such that head-to-tail contacts are formed both between and within subunits.

Computational approach for prediction of domain organization and substrate specificity of modular polyketide synthases

Modular polyketide synthases (PKSs) are large multi-enzymatic, multi-domain megasynthases, which are involved in the biosynthesis of a class of pharmaceutically important natural products, namely polyketides. These enzymes harbor a set of repetitive active sites termed modules and the domains present in each module dictate the chemical moiety that would add to a growing polyketide chain. This modular logic of biosynthesis has been exploited with reasonable success to produce several novel compounds by genetic manipulation. However, for harnessing their vast potential of combinatorial biosynthesis, it is essential to develop knowledge based in silico approaches for correlating the sequence and domain organization of PKSs to their polyketide products. In this work, we have carried out extensive sequence analysis of experimentally characterized PKS clusters to develop an automated computational protocol for unambiguous identification of various PKS domains in a polypeptide sequence. A structure based approach has been used to identify the putative active site residues of acyltransferase (AT) domains, which control the specificities for various starter and extender units during polyketide biosynthesis. On the basis of the analysis of the active site residues and molecular modelling of substrates in the active site of representative AT domains, we have identified a crucial residue that is likely to play a major role in discriminating between malonate and methylmalonate during selection of extender groups by this domain. Structural modelling has also explained the experimentally observed chiral preference of AT domain in substrate selection. This computational protocol has been used to predict the domain organization and substrate specificity for PKS clusters from various microbial genomes. The results of our analysis as well as the computational tools for prediction of domain organization and substrate specificity have been organized in the form of a searchable computerized database (PKSDB). PKSDB would serve as a valuable tool for identification of polyketide products biosynthesized by uncharacterized PKS clusters. This database can also provide guidelines for rational design of experiments to engineer novel polyketides.

A new substrate specificity for acyl transferase domains of the ascomycin polyketide synthase in Streptomyces hygroscopicus

Ascomycin (FK520) is a structurally complex macrolide with immunosuppressant activity produced by Streptomyces hygroscopicus. The biosynthetic origin of C12-C15 and the two methoxy groups at C13 and C15 has been unclear. It was previously shown that acetate is not incorporated into C12-C15 of the macrolactone ring. Here, the acyl transferase (AT) of domain 8 in the ascomycin polyketide synthase was replaced with heterologous ATs by double homologous recombination. When AT8 was replaced with methylmalonyl-CoA-specific AT domains, the strains produced 13-methyl-13-desmethoxyascomycin, whereas when AT8 was replaced with a malonyl-specific domain, the strains produced 13-desmethoxyascomycin. These data show that ascomycin AT8 does not use malonyl- or methylmalonyl-CoA as a substrate in its native context. Therefore, AT8 must be specific for a substrate bearing oxygen on the alpha carbon. Feeding experiments showed that [(13)C]glycerol is incorporated into C12-C15 of ascomycin, indicating that both modules 7 and 8 of the polyketide synthase use an extender unit that can be derived from glycerol. When AT6 of the 6-deoxyerythronolide B synthase gene was replaced with ascomycin AT8 and the engineered gene was expressed in Streptomyces lividans, the strain produced 6-deoxyerythronolide B and 2-demethyl-6-deoxyerythronolide B. Therefore, although neither malonyl-CoA nor methylmalonyl-CoA is a substrate for ascomycin AT8 in its native context, both are substrates in the foreign context of the 6-deoxyerythronolide B synthase. Thus, we have demonstrated a new specificity for an AT domain in the ascomycin polyketide synthase and present evidence that specificity can be affected by context.

Engineering specificity of starter unit selection by the erythromycin-producing polyketide synthase

Chain initiation on many modular polyketide synthases is mediated by acyl transfer from the CoA ester of a dicarboxylic acid, followed by decarboxylation in situ by KSQ, a ketosynthase-like decarboxylase domain. Consistent with this, the acyltransferase (AT) domains of all KSQ-containing loading modules are shown here to contain a key arginine residue at their active site. Site-specific replacement of this arginine residue in the oleandomycin (ole) loading AT domain effectively abolished AT activity, consistent with its importance for catalysis. Substitution of the ole PKS loading module, or of the tylosin PKS loading module, for the erythromycin (ery) loading module gave polyketide products almost wholly either acetate derived or propionate derived, respectively, instead of the mixture found normally. An authentic extension module AT domain, rap AT2 from the rapamycin PKS, functioned appropriately when engineered in the place of the ole loading AT domain, and gave rise to substantial amounts of C13-methylerythromycins, as predicted. The role of direct acylation of the ketosynthase domain of ex-tension module 1 in chain initiation was confirmed by demonstrating that a mutant of the triketide synthase DEBS1-TE, in which the 4'-phosphopante-theine attachment site for starter acyl groups was specifically removed, produced triketide lactone pro-ducts in detectable amounts.

Alteration of the substrate specificity of a modular polyketide synthase acyltransferase domain through site-specific mutations

Cassette replacement of acyltransferase (AT) domains in 6-deoxyerythronolide B synthase (DEBS) with heterologous AT domains with different substrate specificities usually yields the predicted polyketide analogues. As reported here, however, several AT replacements in module 4 of DEBS failed to produce detectable polyketide under standard conditions, suggesting that module 4 is sensitive to perturbation of the protein structure when the AT is replaced. Alignments between different modular polyketide synthase AT domains and the Escherichia coli fatty acid synthase transacylase crystal structure were used to select motifs within the AT domain of module 4 to re-engineer its substrate selectivity and minimize potential alterations to protein folding. Three distinct primary regions of AT4 believed to confer specificity for methylmalonyl-CoA were mutated into the sequence seen in malonyl-CoA-specific domains. Each individual mutation as well as the three in combination resulted in functional DEBSs that produced mixtures of the natural polyketide, 6-deoxyerythronolide B, and the desired novel analogue, 6-desmethyl-6-deoxyerythronolide B. Production of the latter compound indicates that the identified sequence motifs do contribute to AT specificity and that DEBS can process a polyketide chain incorporating a malonate unit at module 4. This is the first example in which the extender unit specificity of a PKS module has been altered by site-specific mutation and provides a useful alternate method for engineering AT specificity in the combinatorial biosynthesis of polyketides.

Chain initiation on the soraphen-producing modular polyketide synthase from Sorangium cellulosum

BACKGROUND

Polyketides are structurally diverse natural products with a wide range of useful activities. Bacterial modular polyketide synthases (PKSs) catalyse the production of non-aromatic polyketides using a different set of enzymes for each successive cycle of chain extension. The choice of starter unit is governed by the substrate specificity of a distinct loading module. The unusual loading module of the soraphen modular PKS, from the myxobacterium Sorangium cellulosum, specifies a benzoic acid starter unit. Attempts to design functional hybrid PKSs using this loading module provide a stringent test of our understanding of PKS structure and function, since the order of the domains in the loading and first extension module is non-canonical in the soraphen PKS, and the producing strain is not an actinomycete.

RESULTS

We have constructed bimodular PKSs based on DEBS1-TE, a derivative of the erythromycin PKS that contains only extension modules 1 and 2 and a thioesterase (TE) domain, by substituting one or more domains from the soraphen PKS. A hybrid PKS containing the soraphen acyltransferase domain AT1b instead of extension acyltransferase domain AT1 produced triketide lactones lacking a methyl group at C-4, as expected if AT1b catalyses the addition of malonyl-CoA during the first extension cycle on the soraphen PKS. Substitution of the DEBS1-TE loading module AT domain by the soraphen AT1a domain led to the production of 5-phenyl-substituted triketide lactone, as well as the normal products of DEBS1-TE. This 5-phenyl triketide lactone was also the product of a hybrid PKS containing the entire soraphen PKS loading module as well as part of its first extension module. Phenyl-substituted lactone was only produced when measures were simultaneously taken to increase the intracellular supply of benzoyl-CoA in the host strain of Saccharopolyspora erythraea.

CONCLUSIONS

These results demonstrate that the ability to recruit a benzoate starter unit can be conferred on a modular PKS by the transfer either of a single AT domain, or of multiple domains to produce a chimaeric first extension module, from the soraphen PKS. However, benzoyl-CoA needs to be provided within the cell as a specific precursor. The data also support the respective roles previously assigned to the adjacent AT domains of the soraphen loading/first extension module. Construction of such hybrid actinomycete-myxobacterial enzymes should significantly extend the synthetic repertoire of modular PKSs.

Substrate specificity of the loading didomain of the erythromycin polyketide synthase

The priming of many modular polyketide synthases is catalyzed by a loading acyltransferase-acyl carrier protein (AT(L)-ACP(L)) didomain which initiates polyketide biosynthesis by transferring a primer unit to the ketosynthase domain of the first module. Because the AT(L) domain influences the choice of the starter unit incorporated into the polyketide backbone, its specificity is of considerable interest. The AT(L)-ACP(L) didomain of the 6-deoxyerythronolide B synthase (DEBS) was functionally expressed in Escherichia coli. Coexpression of the Sfp phosphopantetheinyl transferase from Bacillus subtilis in E. coli leads to efficient posttranslational modification of the ACP(L) domain with a phosphopantetheine moiety. Competition experiments were performed with the holo-protein to determine the relative rates of incorporation of a variety of unnatural substrates in the presence of comparable concentrations of labeled acetyl-CoA. Our results showed that the loading didomain of DEBS can accept a surprisingly broad range of substrates, although it exhibits a preference for unbranched alkyl chain substrates over branched alkyl chain, polar, aromatic, and charged substrates. In particular, its tolerance toward acetyl- and butyryl-CoA is unexpectedly strong. The studies described here present an attractive prototype for the expression, analysis, and engineering of acyltransferase domains in modular polyketide synthases.

PHA synthase from chromatium vinosum: cysteine 149 is involved in covalent catalysis

Polyhydroxyalkanoate synthase (PHA) from Chromatium vinosum catalyzes the conversion of 3-hydroxybutyryl-CoA (HB-CoA) to polyhydroxybutyrate (PHB) and CoA. The synthase is composed of a approximately 1:1 mixture of two subunits, PhaC and PhaE. Size-exclusion chromatography indicates that in solution PhaC and PhaE exist as large molecular weight aggregates. The holo-enzyme, PhaEC, has a specific activity of 150 units/mg. Each subunit was cloned, expressed, and purified as a (His)6-tagged construct. The PhaC-(His)6 protein catalyzed polymerization with a specific activity of 0.9 unit/mg; the PhaE-(His)6 protein was inactive (specific activity <0.001 unit/mg). Addition of PhaE-(His)6 to PhaC-(His)6 increased the activity several 100-fold. To investigate the priming step of the polymerization process, the PhaEC was incubated with a trimer of HB-CoA in which the terminal hydroxyl was replaced with tritium ([3H]-sT-CoA). After Sephadex G50 chromatography, the synthase contained approximately 0.25 equiv of the labile label per PhaC. Incubation of [3H]-sT-synthase with HB-CoA resulted in production of [3H]-polymer. Digestion of [3H]-sT-synthase with trypsin and HPLC analysis resulted in isolation of three labeled peptides. Sequencing by ion trap mass spectrometry showed that they were identical and that they each contained an altered cysteine (C149). One peptide contained the [3H]-sT while the other two contained, in addition to the [3H]-sT, one and two additional monomeric HBs, respectively. Mutation of C149 to alanine gave inactive synthase. The remaining two cysteines of PhaC, 292 and 130, were also mutated to alanine. The former had wild-type (wt) activity, while the latter had 0.004 wt % activity and was capable of making polymer. A mechanism is proposed in which PhaC contains all the elements essential for catalysis and the polymerization proceeds by covalent catalysis using C149 and potentially C130.

Catalytic self-acylation of type II polyketide synthase acyl carrier proteins

BACKGROUND

Aromatic polyketides are synthesised in streptomycetes by the successive condensation of simple carboxylic acids, catalysed by multienzyme complexes--the polyketide synthases (PKSs). Polyketide assembly intermediates are covalently linked as thioesters to the holo-acyl carrier protein (ACP) subunit of these type II PKSs. The ACP is primed for chain elongation by the transfer of malonate from malonyl CoA. Malonylation of fatty acid synthase (FAS) ACPs is catalysed by specific malonyl transferase (MT) enzymes. The type II PKS gene clusters apparently lack genes encoding such MT proteins, however. It has been proposed that the MT subunit of the FAS in streptomycetes catalyses malonylation of both FAS and PKS ACPs in vivo.

RESULTS

We demonstrate that type II PKS ACPs catalyse self-malonylation upon incubation with malonyl CoA in vitro. The self-malonylation reaction of the actinorhodin C17S holo-ACP has a K(m) for malonyl CoA of 219 microM and a kcat of 0.34 min-1. Complete acylation of the PKS ACPs was observed with malonyl, methylmalonyl and acetoacetyl CoAs. No reaction was observed with acetyl and butyryl CoAs and FAS ACPs did not react with any of the substrates. Recombinant FAS MT from Streptomyces coelicolor did not accelerate the rate of malonylation.

CONCLUSIONS

The catalytic self-acylation of type II PKS ACPs is an unprecedented reaction. We propose a reaction mechanism in which conserved arginines form a salt bridge with the acyl moiety and sequester it from bulk solvent. This work suggests that the beta-ketoacyl synthase, chain length factor and ACP may constitute a truly minimal PKS in vivo.

Characterization of the interthiol acyltransferase reaction catalyzed by the beta-ketoacyl synthase domain of the animal fatty acid synthase

The enzyme activity responsible for translocation of saturated acyl chains from the 4'-phosphopantetheine of the acyl carrier protein to the active site cysteine of the beta-ketoacyl synthase in the animal fatty acid synthase has been identified. An enzyme assay was devised that allows uncoupling of the interthiol transfer step from the condensation reaction. Experiments with various fatty acid synthase mutants indicate clearly that catalysis of the transfer of saturated acyl moieties from the 4'-phosphopantetheine thiol to the active site cysteine thiol, Cys-161, is an inherent property of the beta-ketoacyl synthase domain. Catalytic efficiency of the interthiol transferase increases from C2 to C12 and decreases with increasing chain-lengths beyond C12. Malonyl, beta-hydroxybutyryl, and crotonyl thioesters are not substrates for the transferase, whereas the beta-ketobutyryl moiety is a poor substrate. These features of the substrate specificity are exactly as predicted for a transferase that fulfills the proposed role in the fatty acid synthase reaction sequence and indicate that this activity plays an important role in determining the overall specificity of the beta-ketoacyl synthase reaction.