Recognition sites of 3'-OH group by T7 RNA polymerase and its application to transcriptional sequencing

Dynamic transcriptome of mice

Life science in the 21st century is developing rapidly through the structural analysis of biomolecules, the completion of the human genome sequence and the analysis of transcriptomes. The mouse transcriptome has been comprehensively analyzed using a gene discovery approach to collect full-length cDNA (FL-cDNA) clones. The framework of the transcriptome was then mapped out by an international Functional ANnoTation Of Mouse cDNA (FANTOM) effort, and a significant new population of noncoding transcripts was discovered. The geographical analogy of a second "RNA continent," separate from the "continent" of expressed proteins, aids the visualization of this concept. An unexpected number of variations was discovered in the mouse transcriptome. The animal transcriptome has evolved to produce several transcripts and proteins from a single "transcriptional unit". Transcriptome analysis has given rise to the FL-cDNA database and to the 60 770 FANTOM FL-cDNA clone set, and the DNABook was developed as an easier way to distribute these clones. In conjunction with genome sequence databases, transcriptome databases and clone banks will be platforms for developing advanced databases of gene function (e.g. the Genome Function Database). This will enable life science to make rapid progress towards understanding life as a system of molecules.

The Riken mouse genome encyclopedia project

The Riken mouse genome encyclopedia a comprehensive full-length cDNA collection and sequence database. High-level functional annotation is based on sequence homology search, expression profiling, mapping and protein-protein interactions. More than 1000000 clones prepared from 163 tissues were end-sequenced and classified into 128000 clusters, and 60000 representative clones were fully sequenced representing 24000 clear protein-encoding genes. The application of the mouse genome database for positional cloning and gene network regulation analysis is reported.

Practical application of transcriptional sequencing for GC-rich templates

Transcriptional sequencing (TS) is a method that differs considerably from conventional sequencing methods. These differences include the use RNA polymerases with rNTPs and 3'-dNTPs as substrates and terminators respectively, and initiation from double stranded promoters on templates of ds-DNA. We used TS in an attempt to sequence 33 clones whose electropherogram peaks suddenly became absent or weak with conventional sequencing methods. All of the TS reactions overcame the difficulty in sequencing the problematic target regions of the 33 clones. Therefore, TS can be applied to sequence not only GC-rich regions, but also whole genome sequences with a high GC content.

Mapping of 19032 mouse cDNAs on mouse chromosomes

Finding genes by the positional candidate approach requires abundant cDNAs mapped to chromosomes. To provide such important information, we computationally mapped 19032 of our mouse cDNAs to mouse chromosomes by using data from public databases. We used 2 approaches. In the first, we integrated the mapping data of cDNAs on the human genome, known gene-related data, and comparative mapping data. From this, we calculated map positions on the mouse chromosomes. For this first approach, we developed a simple and powerful criterion to choose the correct map position from candidate positions in sequence homology searches. In the second approach, we related cDNAs to expressed sequence tags (EST) previously mapped in radiation hybrid experiments. We discuss improving the mapping by combining the 2 methods.

The genome of bacteriophage phiKMV, a T7-like virus infecting Pseudomonas aeruginosa

The complete DNA sequence of a new lytic T7-like bacteriophage phiKMV is presented. It is the first genome sequence of a member of the Podoviridae that infects Pseudomonas aeruginosa. The linear G + C-rich (62.3%) double-stranded DNA genome of 42,519 bp has direct terminal repeats of 414 bp and contains 48 open reading frames that are all transcribed from the same strand. Despite absence of homology at the DNA level, 11 of the 48 phiKMV-encoded putative proteins show sequence similarity to known T7-type phage proteins. Eighteen open reading frame products have been assigned, including an RNA polymerase, proteins involved in DNA replication, as well as structural, phage maturation, and lysis proteins. Surprisingly, the major capsid protein completely lacks sequence homology to any known protein. Also, the strong virulence toward many clinical P. aeruginosa isolates and a short replication time make phiKMV attractive for phage therapy or a potential source for antimicrobial proteins.

Use of transcriptional sequencing in difficult to read areas of the genome

In genome and cDNA sequencing projects, current cycle sequencing often encounters difficult-to-sequence templates which have unique secondary structures due to GC-rich composition or repeated regions. Due to the formation of stable secondary structures, remarkable decreases in fluorescent signals are observed in cycle sequencing reactions. It is not easy to determine the nucleotide sequences of these regions. Although several modifications of sequencing reactions have been tried to overcome these problems, some unreadable regions remain as gaps in genome sequencing projects. Here, we further developed transcriptional sequencing technology and evaluated the sequencing accuracy in these regions. The method was successively applied to artificial GC cluster templates and putative secondary structure-forming templates from genomic and cDNA clones. Our results indicate that transcriptional sequencing is a powerful and accurate method for GC-rich regions, simple sequence repeats, hairpins (inverted repeats), tandem repeat DNA templates, and gap-closing in draft sequencing data.

RIKEN mouse genome encyclopedia

We have been working to establish the comprehensive mouse full-length cDNA collection and sequence database to cover as many genes as we can, named Riken mouse genome encyclopedia. Recently we are constructing higher-level annotation (Functional ANnoTation Of Mouse cDNA; FANTOM) not only with homology search based annotation but also with expression data profile, mapping information and protein-protein database. More than 1,000,000 clones prepared from 163 tissues were end-sequenced to classify into 159,789 clusters and 60,770 representative clones were fully sequenced. As a conclusion, the 60,770 sequences contained 33,409 unique. The next generation of life science is clearly based on all of the genome information and resources. Based on our cDNA clones we developed the additional system to explore gene function. We developed cDNA microarray system to print all of these cDNA clones, protein-protein interaction screening system, protein-DNA interaction screening system and so on. The integrated database of all the information is very useful not only for analysis of gene transcriptional network and for the connection of gene to phenotype to facilitate positional candidate approach. In this talk, the prospect of the application of these genome resourced should be discussed. More information is available at the web page: http://genome.gsc.riken.go.jp/.

RIKEN integrated sequence analysis (RISA) system--384-format sequencing pipeline with 384 multicapillary sequencer

The RIKEN high-throughput 384-format sequencing pipeline (RISA system) including a 384-multicapillary sequencer (the so-called RISA sequencer) was developed for the RIKEN mouse encyclopedia project. The RISA system consists of colony picking, template preparation, sequencing reaction, and the sequencing process. A novel high-throughput 384-format capillary sequencer system (RISA sequencer system) was developed for the sequencing process. This system consists of a 384-multicapillary auto sequencer (RISA sequencer), a 384-multicapillary array assembler (CAS), and a 384-multicapillary casting device. The RISA sequencer can simultaneously analyze 384 independent sequencing products. The optical system is a scanning system chosen after careful comparison with an image detection system for the simultaneous detection of the 384-capillary array. This scanning system can be used with any fluorescent-labeled sequencing reaction (chain termination reaction), including transcriptional sequencing based on RNA polymerase, which was originally developed by us, and cycle sequencing based on thermostable DNA polymerase. For long-read sequencing, 380 out of 384 sequences (99.2%) were successfully analyzed and the average read length, with more than 99% accuracy, was 654.4 bp. A single RISA sequencer can analyze 216 kb with >99% accuracy in 2.7 h (90 kb/h). For short-read sequencing to cluster the 3' end and 5' end sequencing by reading 350 bp, 384 samples can be analyzed in 1.5 h. We have also developed a RISA inoculator, RISA filtrator and densitometer, RISA plasmid preparator which can handle throughput of 40,000 samples in 17.5 h, and a high-throughput RISA thermal cycler which has four 384-well sites. The combination of these technologies allowed us to construct the RISA system consisting of 16 RISA sequencers, which can process 50,000 DNA samples per day. One haploid genome shotgun sequence of a higher organism, such as human, mouse, rat, domestic animals, and plants, can be revealed by seven RISA systems within one month.

T7 RNA polymerase activation and improvement of the transcriptional sequencing by polyamines

We examined the possibility to improve the effectiveness of the in vitro transcription system using T7 RNA polymerase by coexistence with organic bases. The effect of the additives was evaluated by measuring the amount of RNA products in comparison with that of the control system (without additive). We found that four commercial bases and a series of ethylated polyamine analogues newly designed were active enhancers in the following activation order, 1,8-bis(ethylamino)octane > 1,8-octanediamine > 1,5-bis(ethylamino)pentane > cadaverine > 1,8-bis(ethylamino)-4-azaoctane > spermidine 1,18-bis(ethylamino)-5,14-diazaoctadecane > agmatine. It was shown that RNA products were corresponding, only in the presence of active enhancers, to the full length size of the template DNA, and that sequencing signals were enhanced by the presence of active enhancers with high fidelity so that the transcriptional sequencing was further refined to be a highly sensitive sequencing method from a small amount of linear dsDNA. These results suggest that T7 RNA polymerase was activated by the specific binding of the polyamine additive to produce RNA transcripts with fidelity to the template DNA. Therefore, it is expected that the transcriptional sequencing in the presence of active enhancers might be a powerful and sensitive method, in place of the prevalent DNA amplification method, for genomic science projects and clinical and practical gene diagnoses.

Automated Filtration-Based High-Throughput Plasmid Preparation System

Current methods of plasmid preparation do not allow for large capacity automated processing. We have developed an automated high-throughput system that prepares plasmid DNA for large-scale sequencing. This system is based on our previously reported filtration method. In this method, cell harvesting, alkaline lysis, and plasmid purification occur in a single 96-well microtiter plate from which sequence-ready DNA samples are collected. The plates are designed to allow all reagents to be injected from above the wells and the spent reagents to be aspirated from below. This design has enabled us to build a linear process plasmid preparation system consisting of an automated filter plate stacker and a 21-stage automated plasmid preparator. The 96-well plates used are outfitted with glass-filters that trap Escherichia coli before the plates are stacked in the automated stacker. The plates move from the stacker to each of the 21 stages of the preparator. At specific stages, various reagents or chemicals are injected into the wells from above. Finally, the plates are collected in the second stacker. The optimal throughput of the preparator is 40,000 samples in 17.5 hr. Here, we describe a pilot experiment preparing 15,360 templates in 160 specially designed 96-well glass-filter plates. The prepared plasmids were subjected to restriction digestion, DNA sequencing, and transcriptional sequencing.

Tyrosine 222, a member of the YXDD motif of MuLV RT, is catalytically essential and is a major component of the fidelity center

Tyrosine 222 of MuLV RT is an invariant residue of the highly conserved YXDD motif in the reverse transcriptase class of enzymes. The residue X is Met 184 in HIV-1 RT and Val 223 in MuLV RT. This residue has been implicated in the fidelity of DNA synthesis, whereas the role of the preceding tyrosine in this aspect, as well as in the catalytic mechanism of MuLV RT, remains to be elucidated. We have substituted Tyr 222 with Phe, Ser, and Ala by site-directed mutagenesis and have characterized the properties of the individual mutant enzymes. The results show that Tyr-->Phe substitution did not affect the polymerase activity of the enzyme, while Tyr-->Ser and Tyr-->Ala substitutions significantly reduced the polymerase activity. The pyrophosphorolysis activities of these mutants showed the same trend as the polymerase activities, suggesting an essential role for Y222 in the catalytic mechanism of MuLV RT. One of the most interesting observations of Y-->F substitution was the significantly increased fidelity of DNA synthesis on RNA templates. In addition, a limited extent of ribonucleotide incorporation on RNA template that was consistently noted with the wild-type enzyme was reduced with the Y222F mutant. The resistance to all four ddNTPs, however, persisted in the wild type and Y222 mutants on the RNA template. A ternary complex model of MuLV RT shows that (a) the aromatic ring of Tyr/Phe is positioned between the terminal and penultimate primer bases and (b) the phenolic OH group is seen within hydrogen bonding distance with the base moieties of two template and penultimate primer nucleotides. We propose that the base stacking interaction of Tyr 222 stabilizes the primer terminus position which is essential for the catalytic reaction. However, the weaker stacking interaction of Y compared to F, due to polarization of the pi-charge toward the phenoxyl-OH as well as the resonating character of its H-bond center, may provide slight flexibility to the position of the template base which may be responsible for the error-proneness of MuLV RT.

Identification of stable RNA hairpins causing band compression in transcriptional sequencing and their elimination by use of inosine triphosphate

To identify stable RNA secondary structure causing band compression, 30 lambda DNA clones and four cDNA clones (about 10 kb in total length) were sequenced using Transcriptional Sequencing, which is based on the phage RNA polymerase chain termination reaction with fluorescent 3' deoxynucleoside triphosphate, using the canonical set of rNTPs for the substrate. Electrophoresis was performed on acrylamide gel containing 7 M urea at 50 degrees C using ABI 377 DNA sequencer. A total of 159 band compressions were identified, and most compression sites seem to be due to hairpin structures. We also found that the presence of rITP in place of rGTP in the sequencing reaction can entirely eliminate all band compressions. The use of rITP gave a better peak uniformity and resolution in the sequencing gel in the case of lambda DNA than with c7rGTP, leading to improved accuracy in the sequence determination. Substitution of the base analog rITP for rGTP should be useful for accurate sequencing determination.