Footprinting of Chlorella virus DNA ligase bound at a nick in duplex DNA

Characterisation and engineering of a thermophilic RNA ligase from Palaeococcus pacificus

RNA ligases are important enzymes in molecular biology and are highly useful for the manipulation and analysis of nucleic acids, including adapter ligation in next-generation sequencing of microRNAs. Thermophilic RNA ligases belonging to the RNA ligase 3 family are gaining attention for their use in molecular biology, for example a thermophilic RNA ligase from Methanobacterium thermoautotrophicum is commercially available for the adenylation of nucleic acids. Here we extensively characterise a newly identified RNA ligase from the thermophilic archaeon Palaeococcus pacificus (PpaRnl). PpaRnl exhibited significant substrate adenylation activity but low ligation activity across a range of oligonucleotide substrates. Mutation of Lys92 in motif I to alanine, resulted in an enzyme that lacked adenylation activity, but demonstrated improved ligation activity with pre-adenylated substrates (ATP-independent ligation). Subsequent structural characterisation revealed that in this mutant enzyme Lys238 was found in two alternate positions for coordination of the phosphate tail of ATP. In contrast mutation of Lys238 in motif V to glycine via structure-guided engineering enhanced ATP-dependent ligation activity via an arginine residue compensating for the absence of Lys238. Ligation activity for both mutations was higher than the wild-type, with activity observed across a range of oligonucleotide substrates with varying sequence and secondary structure.

Uncovering nick DNA binding by LIG1 at the single-molecule level

DNA ligases repair the strand breaks are made continually and naturally throughout the genome, if left unrepaired and allowed to persist, they can lead to genome instability in the forms of lethal double-strand (ds) breaks, deletions, and duplications. DNA ligase 1 (LIG1) joins Okazaki fragments during the replication machinery and seals nicks at the end of most DNA repair pathways. Yet, how LIG1 recognizes its target substrate is entirely missing. Here, we uncover the dynamics of nick DNA binding by LIG1 at the single-molecule level. Our findings reveal that LIG1 binds to dsDNA both specifically and non-specifically and exhibits diffusive behavior to form a stable complex at the nick. Furthermore, by comparing with the LIG1 C-terminal protein, we demonstrate that the N-terminal non-catalytic region promotes binding enriched at nick sites and facilitates an efficient nick search process by promoting 1D diffusion along the DNA. Our findings provide a novel single-molecule insight into the nick binding by LIG1, which is critical to repair broken phosphodiester bonds in the DNA backbone to maintain genome integrity.

Caveat mutator: alanine substitutions for conserved amino acids in RNA ligase elicit unexpected rearrangements of the active site for lysine adenylylation

Naegleria gruberi RNA ligase (NgrRnl) exemplifies the Rnl5 family of adenosine triphosphate (ATP)-dependent polynucleotide ligases that seal 3′-OH RNA strands in the context of 3′-OH/5′-PO₄ nicked duplexes. Like all classic ligases, NgrRnl forms a covalent lysyl–AMP intermediate. A two-metal mechanism of lysine adenylylation was established via a crystal structure of the NgrRnl•ATP•(Mn²⁺)₂ Michaelis complex. Here we conducted an alanine scan of active site constituents that engage the ATP phosphates and the metal cofactors. We then determined crystal structures of ligase-defective NgrRnl-Ala mutants in complexes with ATP/Mn²⁺. The unexpected findings were that mutations K170A, E227A, K326A and R149A (none of which impacted overall enzyme structure) triggered adverse secondary changes in the active site entailing dislocations of the ATP phosphates, altered contacts to ATP, and variations in the numbers and positions of the metal ions that perverted the active sites into off-pathway states incompatible with lysine adenylylation. Each alanine mutation elicited a distinctive off-pathway distortion of the ligase active site. Our results illuminate a surprising plasticity of the ligase active site in its interactions with ATP and metals. More broadly, they underscore a valuable caveat when interpreting mutational data in the course of enzyme structure-function studies.

A DNA functionalized porphyrinic metal-organic framework as a peroxidase mimicking catalyst for amperometric determination of the activity of T4 polynucleotide kinase

An electrochemical method is described for the sensitive detection of the activity of the enzyme T4 polynucleotide kinase (PNK) by using a DNA functionalized porphyrinic metal-organic framework (L/(Fe-P)n-MOF). In the presence of PNK, the hairpin oligonucleotide (HP1) becomes phosphorylated, and the trigger is released by lambda exonuclease (λ exo). The trigger DNA hybridizes with hairpin probe (immobilized on the gold electrode) to form a nicking endonuclease cleavage site. Thus, a single-strand capture probe is employed to hybridize with L/(Fe-P)n-MOF. The (Fe-P)n-MOF is a peroxidase mimicking material with high catalytic efficiency. By using this amplification strategy, an electrochemical signal is procured that allows for the determination of T4 PNK in the 1.0 mU·mL^-1 to 1.0 U·mL^-1 with a detection limit of 0.62 mU·mL^-1. The method is selective and can be used to screen for enzyme inhibitors. Conceivably, the (Fe-P)n-MOF can also be used to detect other analytes via its peroxidase-mimicking activity. Graphical abstract Schematic presentation of T4 polynucleotide kinase (PNK) detection. Two hairpin DNAs (HP) and a porphyrinic metal-organic framework with peroxidase-mimicking activity are used. The detection limit is 0.62 mU mL^-1 with enzyme assisted signal amplification. This method is selective and can be used to screen for enzyme inhibitors.

Structural and mutational analysis of archaeal ATP-dependent RNA ligase identifies amino acids required for RNA binding and catalysis

An ATP-dependent RNA ligase from Methanobacterium thermoautotrophicum (MthRnl) catalyzes intramolecular ligation of single-stranded RNA to form a closed circular RNA via covalent ligase-AMP and RNA-adenylylate intermediate. Here, we report the X-ray crystal structures of an MthRnl•ATP complex as well as the covalent MthRnl–AMP intermediate. We also performed structure-guided mutational analysis to survey the functions of 36 residues in three component steps of the ligation pathway including ligase-adenylylation (step 1), RNA adenylylation (step 2) and phosphodiester bond synthesis (step 3). Kinetic analysis underscored the importance of motif 1a loop structure in promoting phosphodiester bond synthesis. Alanine substitutions of Thr117 or Arg118 favor the reverse step 2 reaction to deadenylate the 5′-AMP from the RNA-adenylate, thereby inhibiting step 3 reaction. Tyr159, Phe281 and Glu285, which are conserved among archaeal ATP-dependent RNA ligases and are situated on the surface of the enzyme, are required for RNA binding. We propose an RNA binding interface of the MthRnl based on the mutational studies and two sulfate ions that co-crystallized at the active site cleft in the MthRnl–AMP complex.

One-step assay for the quantification of T4 DNA ligase

As one of the most commonly used enzyme in molecular biology, the T4 DNA ligase presents an important tool for the manipulation of DNA. T4 DNA ligase activity measurements are based on the use of radioactivity or rather labor-intense procedures including gel-based analysis. We therefore established a homogeneous T4 DNA ligase assay utilizing a specifically designed fluorescein- and dark quencher-labeled DNA molecule. Upon ligation of both DNA molecules, a quenching occurs and the fluorescence intensity decreases with increasing ligase concentrations. The assay allows a sensitive and precise quantification (CV, 4.6-5.5 %) of T4 DNA ligase activities and showed a high specificity when tested against other ligases of related and different species. Most importantly, this T4 DNA ligase assay requires only one working and incubation step before measurement can take place at room temperature and may therefore offer an interesting alternative to existing, more laborious ligase assays.

Enzyme-adenylate structure of a bacterial ATP-dependent DNA ligase with a minimized DNA-binding surface

The enzyme–adenylate structure of a bacterial ATP-dependent DNA ligase (ADL), which does not have any additional DNA-binding domains, is similar to minimal viral ADLs that comprise only the core catalytic domains. The bacterial ADL also lacks the unstructured loops which are involved in DNA binding in the viral ADLs, implying that it must instead use short well structured motifs of the core domains to engage its substrate.

DNA ligases are a structurally diverse class of enzymes which share a common catalytic core and seal breaks in the phosphodiester backbone of double-stranded DNA via an adenylated intermediate. Here, the structure and activity of a recombinantly produced ATP-dependent DNA ligase from the bacterium Psychromonas sp. strain SP041 is described. This minimal-type ligase, like its close homologues, is able to ligate singly nicked double-stranded DNA with high efficiency and to join cohesive-ended and blunt-ended substrates to a more limited extent. The 1.65 Å resolution crystal structure of the enzyme–adenylate complex reveals no unstructured loops or segments, and suggests that this enzyme binds the DNA without requiring full encirclement of the DNA duplex. This is in contrast to previously characterized minimal DNA ligases from viruses, which use flexible loop regions for DNA interaction. The Psychromonas sp. enzyme is the first structure available for the minimal type of bacterial DNA ligases and is the smallest DNA ligase to be crystallized to date.

Efficient DNA ligation in DNA-RNA hybrid helices by Chlorella virus DNA ligase

Single-stranded DNA molecules (ssDNA) annealed to an RNA splint are notoriously poor substrates for DNA ligases. Herein we report the unexpectedly efficient ligation of RNA-splinted DNA by Chlorella virus DNA ligase (PBCV-1 DNA ligase). PBCV-1 DNA ligase ligated ssDNA splinted by RNA with kcat ≈ 8 x 10(-3) s(-1) and K(M) < 1 nM at 25 °C under conditions where T4 DNA ligase produced only 5'-adenylylated DNA with a 20-fold lower kcat and a K(M) ≈ 300 nM. The rate of ligation increased with addition of Mn(2+), but was strongly inhibited by concentrations of NaCl >100 mM. Abortive adenylylation was suppressed at low ATP concentrations (<100 µM) and pH >8, leading to increased product yields. The ligation reaction was rapid for a broad range of substrate sequences, but was relatively slower for substrates with a 5'-phosphorylated dC or dG residue on the 3' side of the ligation junction. Nevertheless, PBCV-1 DNA ligase ligated all sequences tested with 10-fold less enzyme and 15-fold shorter incubation times than required when using T4 DNA ligase. Furthermore, this ligase was used in a ligation-based detection assay system to show increased sensitivity over T4 DNA ligase in the specific detection of a target mRNA.

Kinetic analysis of DNA strand joining by Chlorella virus DNA ligase and the role of nucleotidyltransferase motif VI in ligase adenylylation

Chlorella virus DNA ligase (ChVLig) is an instructive model for mechanistic studies of the ATP-dependent DNA ligase family. ChVLig seals 3'-OH and 5'-PO(4) termini via three chemical steps: 1) ligase attacks the ATP α phosphorus to release PP(i) and form a covalent ligase-adenylate intermediate; 2) AMP is transferred to the nick 5'-phosphate to form DNA-adenylate; 3) the 3'-OH of the nick attacks DNA-adenylate to join the polynucleotides and release AMP. Each chemical step requires Mg(2+). Kinetic analysis of nick sealing by ChVLig-AMP revealed that the rate constant for phosphodiester synthesis (k(step3) = 25 s(-1)) exceeds that for DNA adenylylation (k(step2) = 2.4 s(-1)) and that Mg(2+) binds with similar affinity during step 2 (K(d) = 0.77 mM) and step 3 (K(d) = 0.87 mM). The rates of DNA adenylylation and phosphodiester synthesis respond differently to pH, such that step 3 becomes rate-limiting at pH ≤ 6.5. The pH profiles suggest involvement of one and two protonation-sensitive functional groups in catalysis of steps 2 and 3, respectively. We suggest that the 5'-phosphate of the nick is the relevant protonation-sensitive moiety and that a dianionic 5'-phosphate is necessary for productive step 2 catalysis. Motif VI, located at the C terminus of the OB-fold domain of ChVLig, is a conserved feature of ATP-dependent DNA ligases and GTP-dependent mRNA capping enzymes. Presteady state and burst kinetic analysis of the effects of deletion and missense mutations highlight the catalytic contributions of ChVLig motif VI, especially the Asp-297 carboxylate, exclusively during the ligase adenylylation step.

Structure-function analysis of the OB and latch domains of chlorella virus DNA ligase

Chlorella virus DNA ligase (ChVLig) is a minimized eukaryal ATP-dependent DNA sealing enzyme with an intrinsic nick-sensing function. ChVLig consists of three structural domains, nucleotidyltransferase (NTase), OB-fold, and latch, that envelop the nicked DNA as a C-shaped protein clamp. The OB domain engages the DNA minor groove on the face of the duplex behind the nick, and it makes contacts to amino acids in the NTase domain surrounding the ligase active site. The latch module occupies the DNA major groove flanking the nick. Residues at the tip of the latch contact the NTase domain to close the ligase clamp. Here we performed a structure-guided mutational analysis of the OB and latch domains. Alanine scanning defined seven individual amino acids as essential in vivo (Lys-274, Arg-285, Phe-286, and Val-288 in the OB domain; Asn-214, Phe-215, and Tyr-217 in the latch), after which structure-activity relations were clarified by conservative substitutions. Biochemical tests of the composite nick sealing reaction and of each of the three chemical steps of the ligation pathway highlighted the importance of Arg-285 and Phe-286 in the catalysis of the DNA adenylylation and phosphodiester synthesis reactions. Phe-286 interacts with the nick 5'-phosphate nucleotide and the 3'-OH base pair and distorts the DNA helical conformation at the nick. Arg-285 is a key component of the OB-NTase interface, where it forms a salt bridge to the essential Asp-29 side chain, which is imputed to coordinate divalent metal catalysts during the nick sealing steps.

Functional dissection of the DNA interface of the nucleotidyltransferase domain of chlorella virus DNA ligase

Chlorella virus DNA ligase (ChVLig) has pluripotent biological activity and an intrinsic nick-sensing function. ChVLig consists of three structural modules that envelop nicked DNA as a C-shaped protein clamp: a nucleotidyltransferase (NTase) domain and an OB domain (these two are common to all DNA ligases) as well as a distinctive β-hairpin latch module. The NTase domain, which performs the chemical steps of ligation, binds the major groove flanking the nick and the minor groove on the 3'-OH side of the nick. Here we performed a structure-guided mutational analysis of the NTase domain, surveying the effects of 35 mutations in 19 residues on ChVLig activity in vivo and in vitro, including biochemical tests of the composite nick sealing reaction and of the three component steps of the ligation pathway (ligase adenylylation, DNA adenylylation, and phosphodiester synthesis). The results highlight (i) key contacts by Thr-84 and Lys-173 to the template DNA strand phosphates at the outer margins of the DNA ligase footprint; (ii) essential contacts of Ser-41, Arg-42, Met-83, and Phe-75 with the 3'-OH strand at the nick; (iii) Arg-176 phosphate contacts at the nick and with ATP during ligase adenylylation; (iv) the role of Phe-44 in forming the protein clamp around the nicked DNA substrate; and (v) the importance of adenine-binding residue Phe-98 in all three steps of ligation. Kinetic analysis of single-turnover nick sealing by ChVLig-AMP underscored the importance of Phe-75-mediated distortion of the nick 3'-OH nucleoside in the catalysis of DNA 5'-adenylylation (step 2) and phosphodiester synthesis (step 3). Induced fit of the nicked DNA into a distorted conformation when bound within the ligase clamp may account for the nick-sensing capacity of ChVLig.

Enhanced discrimination of single nucleotide polymorphisms using 3' nucleotide differences in ligase detection reaction probes

The ligase detection reaction (LDR) is a highly specific genotyping method for single nucleotide variations. Although LDR typically discriminates single nucleotide polymorphism (SNP) alleles at the 3' end of so-called LDR discriminating probes, we designed probes in which the position of nucleotide differences for discrimination was shifted to the second and third nucleotides from the 3' end. Using the 3'-modified probes, we targeted SNPs of the human ABO group and investigated the specificity and efficiency of ligation by a universal LDR assay. We demonstrated that one or two nucleotide shifts of differences in discriminating probes improve the allele balance in detecting both base substitutions and short deletions. In regard to short deletions, moreover, the shifts of nucleotide differences in discriminating probes form the perfect-machted or multiple-mismatched structures (the bulge structures) in the discriminating probe-target DNA duplex and may contribute to enhance ligation efficiency.

Bridged oligonucleotides as molecular probes for investigation of enzyme-substrate interaction and allele-specific analysis of DNA

The efficiency of enzymatic conversion of DNA complexes containing non-nucleotide inserts has been studied. T4 DNA ligase and Taq DNA polymerase have been included in the study as examples of widely used DNA-dependent enzymes. A series of substrate DNA complexes have been formed using native oligonucleotides and bridged ones bearing non-nucleotide inserts based on phosphodiesters of di-, tetra-, or hexaethylene glycol, 1,5-pentanediol, 1,10-decanediol, and 3-hydroxy-2(hydroxymethyl)-tetrahydrofuran. The perturbation in DNA located far from the site of the enzyme action had almost no influence on the substrate properties of the complex, while insertion near this site significantly deteriorated them. The use of a series of modified duplexes allows one to locate the position of the enzyme-binding site on DNA substrate with the accuracy of 1-2 nucleotides. The presence of a non-nucleotide insert in the complex has been also shown to enhance the efficiency of single mismatch discrimination upon both template-directed ligation and extension of oligonucleotides.

A LDR-PCR approach for multiplex polymorphisms genotyping of severely degraded DNA with fragment sizes <100 bp

Reducing amplicon sizes has become a major strategy for analyzing degraded DNA typical of forensic samples. However, amplicon sizes in current mini-short tandem repeat-polymerase chain reaction (PCR) and mini-sequencing assays are still not suitable for analysis of severely degraded DNA. In this study, we present a multiplex typing method that couples ligase detection reaction with PCR that can be used to identify single nucleotide polymorphisms and small-scale insertion/deletions in a sample of severely fragmented DNA. This method adopts thermostable ligation for allele discrimination and subsequent PCR for signal enhancement. In this study, four polymorphic loci were used to assess the ability of this technique to discriminate alleles in an artificially degraded sample of DNA with fragment sizes <100 bp. Our results showed clear allelic discrimination of single or multiple loci, suggesting that this method might aid in the analysis of extremely degraded samples in which allelic drop out of larger fragments is observed.

Sequence-specific 1H N, 13C, and 15N backbone resonance assignments of the 34 kDa Paramecium bursaria Chlorella virus 1 (PBCV1) DNA ligase

Chlorella virus DNA ligase (ChVLig) is a minimal (298-amino acid) pluripotent ATP-dependent ligase composed of three structural modules--a nucleotidyltransferase domain, an OB domain, and a beta-hairpin latch--that forms a circumferential clamp around nicked DNA. ChVLig provides an instructive model to understand the chemical and conformational steps of nick repair. Here we report the assignment of backbone (13)C, (15)N, (1)H(N) resonances of this 34.2 kDa protein, the first for a DNA ligase in full-length form.

Analysis of genes, transcripts, and proteins via DNA ligation

Analytical reactions in which short DNA strands are used in combination with DNA ligases have proven useful for measuring, decoding, and locating most classes of macromolecules. Given the need to accumulate large amounts of precise molecular information from biological systems in research and in diagnostics, ligation reactions will continue to offer valuable strategies for advanced analytical reactions. Here, we provide a basis for further development of methods by reviewing the history of analytical ligation reactions, discussing the properties of ligation reactions that render them suitable for engineering novel assays, describing a wide range of successful ligase-based assays, and briefly considering future directions.

Dynamics of phosphodiester synthesis by DNA ligase

Ligases are essential actors in DNA replication, recombination, and repair by virtue of their ability to seal breaks in the phosphodiester backbone. Ligation proceeds through a nicked DNA-adenylate intermediate (AppDNA), which must be sealed quickly to avoid creating a potentially toxic lesion. Here, we take advantage of ligase-catalyzed AMP-dependent incision of a single supercoiled DNA molecule to observe the step of phosphodiester synthesis in real time. An exponentially distributed number of supercoils was relaxed per successful incision-resealing event, from which we deduce the torque-dependent ligation probability per DNA swivel. Premature dissociation of ligase from nicked DNA-adenylate accounted for approximately 10% of the observed events. The ability of ligase to form a C-shaped protein clamp around DNA is a key determinant of ligation probability per turn and the stability of the ligase-AppDNA intermediate. The estimated rate of phosphodiester synthesis by DNA ligase (400 s(-1)) is similar to the high rates of phosphodiester synthesis by replicative DNA polymerases.

DNA and RNA ligases: structural variations and shared mechanisms

DNA and RNA ligases join 3' OH and 5' PO4 ends in polynucleotide substrates using a three-step reaction mechanism that involves covalent modification of both the ligase enzyme and the polynucleotide substrate with AMP. In the past three years, several polynucleotide ligases have been crystallized in complex with nucleic acid, providing the introductory views of ligase enzymes engaging their substrates. Crystal structures for two ATP-dependent DNA ligases, an NAD+-dependent DNA ligase, and an ATP-dependent RNA ligase demonstrate how ligases utilize the AMP group and their multi-domain architectures to manipulate nucleic acid structure and catalyze the end-joining reaction. Together with unliganded crystal structures of DNA and RNA ligases, a more comprehensive and dynamic understanding of the multi-step ligation reaction mechanism has emerged.

Two DNA-binding and nick recognition modules in human DNA ligase III

Human DNA ligase III contains an N-terminal zinc finger domain that binds to nicks and gaps in DNA. This small domain has been described as a DNA nick sensor, but it is not required for DNA nick joining activity in vitro. In light of new structural information for mammalian ligases, we measured the DNA binding affinity and specificity of each domain of DNA ligase III. These studies identified two separate, independent DNA-binding modules in DNA ligase III that each bind specifically to nicked DNA over intact duplex DNA. One of these modules comprises the zinc finger domain and DNA-binding domain, which function together as a single DNA binding unit. The catalytic core of ligase III is the second DNA nick-binding module. Both binding modules are required for ligation of blunt ended DNA substrates. Although the zinc finger increases the catalytic efficiency of nick ligation, it appears to occupy the same binding site as the DNA ligase III catalytic core. We present a jackknife model for ligase III that posits conformational changes during nick sensing and ligation to extend the versatility of the enzyme.

Structural basis for nick recognition by a minimal pluripotent DNA ligase

Chlorella virus DNA ligase, the smallest eukaryotic ligase known, has pluripotent biological activity and an intrinsic nick-sensing function, despite having none of the accessory domains found in cellular ligases. A 2.3-A crystal structure of the Chlorella virus ligase-AMP intermediate bound to duplex DNA containing a 3'-OH-5'-PO4 nick reveals a new mode of DNA envelopment, in which a short surface loop emanating from the OB domain forms a beta-hairpin 'latch' that inserts into the DNA major groove flanking the nick. A network of interactions with the 3'-OH and 5'-PO4 termini in the active site illuminates the DNA adenylylation mechanism and the crucial roles of AMP in nick sensing and catalysis. Addition of a divalent cation triggered nick sealing in crystallo, establishing that the nick complex is a bona fide intermediate in the DNA repair pathway.

Last stop on the road to repair: structure of E. coli DNA ligase bound to nicked DNA-adenylate

NAD(+)-dependent DNA ligases (LigA) are ubiquitous in bacteria and essential for growth. Their distinctive substrate specificity and domain organization vis-a-vis human ATP-dependent ligases make them outstanding targets for anti-infective drug discovery. We report here the 2.3 A crystal structure of Escherichia coli LigA bound to an adenylylated nick, which captures LigA in a state poised for strand closure and reveals the basis for nick recognition. LigA envelopes the DNA within a protein clamp. Large protein domain movements and remodeling of the active site orchestrate progression through the three chemical steps of the ligation reaction. The structure inspires a strategy for inhibitor design.

RNA ligase structures reveal the basis for RNA specificity and conformational changes that drive ligation forward

T4 RNA ligase 2 (Rnl2) and kinetoplastid RNA editing ligases exemplify a family of RNA repair enzymes that seal 3'OH/5'PO(4) nicks in duplex RNAs via ligase adenylylation (step 1), AMP transfer to the nick 5'PO(4) (step 2), and attack by the nick 3'OH on the 5'-adenylylated strand to form a phosphodiester (step 3). Crystal structures are reported for Rnl2 at discrete steps along this pathway: the covalent Rnl2-AMP intermediate; Rnl2 bound to an adenylylated nicked duplex, captured immediately following step 2; and Rnl2 at an adenylylated nick in a state poised for step 3. These structures illuminate the stereochemistry of nucleotidyl transfer and reveal how remodeling of active-site contacts and conformational changes propel the ligation reaction forward. Mutational analysis and comparison of nick-bound structures of Rnl2 and human DNA ligase I highlight common and divergent themes of substrate recognition that can explain their specialization for RNA versus DNA repair.

Crystal structure and nonhomologous end-joining function of the ligase component of Mycobacterium DNA ligase D

DNA ligase D (LigD) is a large polyfunctional enzyme involved in nonhomologous end-joining (NHEJ) in mycobacteria. LigD consists of a C-terminal ATP-dependent ligase domain fused to upstream polymerase and phosphoesterase modules. Here we report the 2.4 angstroms crystal structure of the ligase domain of Mycobacterium LigD, captured as the covalent ligase-AMP intermediate with a divalent metal in the active site. A chloride anion on the protein surface coordinated by the ribose 3'-OH and caged by arginine and lysine side chains is a putative mimetic of the 5'-phosphate at a DNA nick. Structure-guided mutational analysis revealed distinct requirements for the adenylylation and end-sealing reactions catalyzed by LigD. We found that a mutation of Mycobacterium LigD that ablates only ligase activity results in decreased fidelity of NHEJ in vivo and a strong bias of mutagenic events toward deletions instead of insertions at the sealed DNA ends. This phenotype contrasts with the increased fidelity of double-strand break repair in deltaligD cells or in a strain in which only the polymerase function of LigD is defective. We surmise that the signature error-prone quality of bacterial NHEJ in vivo arises from a dynamic balance between the end-remodeling and end-sealing steps.

Analyzing ligation mixtures using a PCR based method

We have developed a simple and effective method (Lig-PCR) for monitoring ligation reactions using PCR and primers that are common to many cloning vectors. Ligation mixtures can directly be used as templates and the results can be analyzed by conventional gel electrophoresis. The PCR products are representative of the recombinant molecules created during ligation and the corresponding transformants. Orientation of inserts can also be determined using an internal primer. The usefulness of this method has been demonstrated using ligation mixtures of two cDNA's derived from the salivary glands of Aedes aegypti mosquitoes. The method described here is sensitive and easy to perform compared to currently available methods.

Dual Mechanisms whereby a Broken RNA End Assists the Catalysis of Its Repair by T4 RNA Ligase 2

T4 RNA ligase 2 (Rnl2) efficiently seals 3'-OH/5'-PO4 RNA nicks via three nucleotidyl transfer steps. Here we show that the terminal 3'-OH at the nick accelerates the second step of the ligase pathway (adenylylation of the 5'-PO4 strand) by a factor of 1000, even though the 3'-OH is not chemically transformed during the reaction. Also, the terminal 2'-OH at the nick accelerates the third step (attack of the 3'-OH on the 5'-adenylated strand to form a phosphodiester) by a factor of 25-35, even though the 2'-OH is not chemically reactive. His-37 of Rnl2 is uniquely required for step 3, providing a approximately 10(2) rate acceleration. Biochemical epistasis experiments show that His-37 and the RNA 2'-OH act independently. We conclude that the broken RNA end promotes catalysis of its own repair by Rnl2 via two mechanisms, one of which (enhancement of step 3 by the 2'-OH) is specific to RNA ligation. Substrate-assisted catalysis provides a potential biochemical checkpoint during nucleic acid repair.

Structural rearrangement accompanying NAD+ synthesis within a bacterial DNA ligase crystal

DNA ligase is an enzyme important for DNA repair and replication. Eukaryotic genomes encode ligases requiring ATP as the cofactor; bacterial genomes encode NAD(+)-dependent ligase. This difference in substrate specificities and the essentiality of NAD(+)-dependent ligase for bacterial survival make NAD(+)-dependent ligase a good target for designing highly specific anti-infectives. Any such structure-guided effort would require the knowledge of the precise mechanism of NAD+ recognition by the enzyme. We report the principles of NAD+ recognition by presenting the synthesis of NAD+ from nicotinamide mononucleotide (NMN) and AMP, catalyzed by Enterococcus faecalis ligase within the crystal lattice. Unprecedented conformational change, required to reorient the two subdomains of the protein for the condensation to occur and to recognize NAD+, is captured in two structures obtained using the same protein crystal. Structural data and sequence analysis presented here confirms and extends prior functional studies of the ligase adenylation reaction.

Human DNA ligase I completely encircles and partially unwinds nicked DNA

The end-joining reaction catalysed by DNA ligases is required by all organisms and serves as the ultimate step of DNA replication, repair and recombination processes. One of three well characterized mammalian DNA ligases, DNA ligase I, joins Okazaki fragments during DNA replication. Here we report the crystal structure of human DNA ligase I (residues 233 to 919) in complex with a nicked, 5' adenylated DNA intermediate. The structure shows that the enzyme redirects the path of the double helix to expose the nick termini for the strand-joining reaction. It also reveals a unique feature of mammalian ligases: a DNA-binding domain that allows ligase I to encircle its DNA substrate, stabilizes the DNA in a distorted structure, and positions the catalytic core on the nick. Similarities in the toroidal shape and dimensions of DNA ligase I and the proliferating cell nuclear antigen sliding clamp are suggestive of an extensive protein-protein interface that may coordinate the joining of Okazaki fragments.

Construction, stability, and activity of multivalent circular anticoagulant aptamers

Here we describe the design and construction of multivalent circular DNA aptamers. Four aptameric binding motifs directed at blood-borne targets are used as a model set from which larger, multidomain aptamers are constructed in a straightforward manner. Intra- or intermolecular ligation of precursor oligonucleotides provides a stabilizing mechanism against degradation by the predominant exonuclease activity of blood products without the need for post-selection chemical modification. In many cases, circular DNA aptamer half-lives are extended beyond 10 h in serum and plasma, making such constructs viable for therapeutic and diagnostic applications. Duplexes and three-way junctions are used as scaffold architectures around which two, three, or four aptameric motifs can be arranged in a structurally defined manner, giving rise to improved binding characteristics through stability and avidity gains. Circular aptamers targeted against thrombin display improved anticoagulant potency with EC50 values 2-3-fold better than those of the canonical GS-522 thrombin DNA aptamer. Intrinsic duplex regions provide an opportunity to incorporate additional transcription factor binding motifs, whereas ancillary loops can be used to provide further functionality. These anticoagulant aptamers provide a starting point for merging the principles of DNA nanotechnology with aptameric functions.

Protein-DNA footprinting by endcapped duplex oligodeoxyribonucleotides

Oligodeoxyribonucleotides (5'-phosphorylated) of varying lengths were capped using a polyamide linker to form thermodynamically stable, endcapped DNA duplexes containing 8-14 bp. We have employed these endcapped DNA duplexes as tools to determine the DNA footprint of T4 DNA ligase. By high-performance liquid chromatography and PAGE analysis of the ligation mixtures of the endcapped DNA duplexes, we have found that by varying the lengths and the position of the nick, we can determine the minimal DNA-binding site as well as the mode of binding (symmetrical or asymmetrical binding) by the enzyme. The results of the study revealed that a 11 bp endcapped duplex was the shortest duplex effectively ligated. Dependence of ligation efficiency on nick position demonstrates that T4 DNA ligase bound asymmetrically to its DNA substrate. The use of a set of thermodynamically stable endcapped deoxyribonucleoside duplexes as a tool to elucidate the DNA footprint provides an efficient strategy for footprinting, which avoids ambiguities associated with chemical and biochemical footprinting methods.

Real-time monitoring of nucleic acid ligation in homogenous solutions using molecular beacons

Nucleic acids ligation is a vital process in the repair, replication and recombination of nucleic acids. Traditionally, it is assayed by denatured gel electrophoresis and autoradiography, which are not sensitive, and are complex and discontinuous. Here we report a new approach for ligation monitoring using molecular beacon DNA probes. The molecular beacon, designed in such a way that its sequence is complementary with the product of the ligation process, is used to monitor the nucleic acid ligation in a homogeneous solution and in real-time. Our method is fast and simple. We are able to study nucleic acids ligation kinetics conveniently and to determine the activity of DNA ligase accurately. We have studied different factors that influence DNA ligation catalyzed by T4 DNA ligase. The major advantages of our method are its ultrasensitivity, excellent specificity, convenience and real-time monitoring in homogeneous solution. This method will be widely useful for studying nucleic acids ligation process and other nucleic acid interactions.

Analysis of DNA replication intermediates suggests mechanisms of repeat sequence expansion

We previously developed a system to investigate the mechanism of repeat sequence expansion during eukaryotic Okazaki fragment processing. Upstream and downstream primers were annealed to a complementary template to overlap across a CAG repeat region. Annealing by the competing primers lead to structural intermediates that ligated to expand the repeat segment. When an equal number of repeats overlapped on the upstream and downstream primers, a 2-fold expansion was expected, but no expansion occurred. We show here that such substrates do not expand irrespective of their repeat length. To reveal mechanism, we tested different hairpin loop intermediates expected to form and facilitate ligation. Substrates configured to form large loops in either the upstream or downstream primer alone allowed expansion. Large or small fixed position single loops allowed expansion when located at least six nucleotides up- or downstream of the nick. Fixed loops in both primers, simulating a double loop intermediate, allowed expansion as long as each loop was nine nucleotides from the nick. Thus, neither the double loop configuration required to form with equal length overlaps nor the large single loop configuration are fundamental structural impediments to expansion. We propose a model for the expansion mechanism based on the relative stabilities of single loop, double loop, hairpin, and flap intermediates that is consistent with the observed expansion efficiency of equal and unequal overlap substrates. The model suggests that the equilibrium concentration of double loop intermediates is so vanishingly small that they are not likely contributors to sequence expansion.

Analysis of the DNA joining repertoire of Chlorella virus DNA ligase and a new crystal structure of the ligase-adenylate intermediate

Chlorella virus DNA ligase is the smallest eukaryotic ATP-dependent DNA ligase known; it suffices for yeast cell growth in lieu of the essential yeast DNA ligase Cdc9. The Chlorella virus ligase-adenylate intermediate has an intrinsic nick sensing function and its DNA footprint extends 8-9 nt on the 3'-hydroxyl (3'-OH) side of the nick and 11-12 nt on the 5'-phosphate (5'-PO4) side. Here we establish the minimal length requirements for ligatable 3'-OH and 5'-PO4 strands at the nick (6 nt) and describe a new crystal structure of the ligase-adenylate in a state construed to reflect the configuration of the active site prior to nick recognition. Comparison with a previous structure of the ligase-adenylate bound to sulfate (a mimetic of the nick 5'-PO4) suggests how the positions and contacts of the active site components and the bound adenylate are remodeled by DNA binding. We find that the minimal Chlorella virus ligase is capable of catalyzing non-homologous end-joining reactions in vivo in yeast, a process normally executed by the structurally more complex cellular Lig4 enzyme. Our results suggest a model of ligase evolution in which: (i) a small 'pluripotent' ligase is the progenitor of the much larger ligases found presently in eukaryotic cells and (ii) gene duplications, variations within the core ligase structure and the fusion of new domains to the core structure (affording new protein-protein interactions) led to the compartmentalization of eukaryotic ligase function, i.e. by enhancing some components of the functional repertoire of the ancestral ligase while disabling others.

Mutational analysis of the guanylyltransferase component of Mammalian mRNA capping enzyme

RNA guanylyltransferase is an essential enzyme that catalyzes the second of three steps in the synthesis of the 5'-cap structure of eukaryotic mRNA. Here we conducted a mutational analysis of the guanylyltransferase domain of the mouse capping enzyme Mce1. We introduced 50 different mutations at 22 individual amino acids and assessed their effects on Mce1 function in vivo in yeast. We identified 16 amino acids as being essential for Mce1 activity (Arg299, Arg315, Asp343, Glu345, Tyr362, Asp363, Arg380, Asp438, Gly439, Lys458, Lys460, Asp468, Arg530, Asp532, Lys533, and Asn537) and clarified structure-activity relationships by testing the effects of conservative substitutions. The new mutational data for Mce1, together with prior mutational studies of Saccharomyces cerevisiae guanylyltransferase and the crystal structures of Chlorella virus and Candida albicans guanylyltransferases, provide a coherent picture of the functional groups that comprise and stabilize the active site. Our results extend and consolidate the hypothesis of a shared structural basis for catalysis by RNA capping enzymes, DNA ligases, and RNA ligases, which comprise a superfamily of covalent nucleotidyl transferases defined by a constellation of conserved motifs. Analysis of the effects of motif VI mutations on Mce1 guanylyltransferase activity in vitro highlights essential roles for Arg530, Asp532, Lys533, and Asn537 in GTP binding and nucleotidyl transfer.

Dynamic mechanism of nick recognition by DNA ligase

DNA ligases are the enzymes responsible for the repair of single-stranded and double-stranded nicks in dsDNA. DNA ligases are structurally similar, possibly sharing a common molecular mechanism of nick recognition and ligation catalysis. This mechanism remains unclear, in part because the structure of ligase in complex with dsDNA has yet to be solved. DNA ligases share common structural elements with DNA polymerases, which have been cocrystallized with dsDNA. Based on the observed DNA polymerase-dsDNA interactions, we propose a mechanism for recognition of a single-stranded nick by DNA ligase. According to this mechanism, ligase induces a B-to-A DNA helix transition of the enzyme-bound dsDNA motif, which results in DNA contraction, bending and unwinding. For non-nicked dsDNA, this transition is reversible, leading to dissociation of the enzyme. For a nicked dsDNA substrate, the contraction of the enzyme-bound DNA motif (a) triggers an opened-closed conformational change of the enzyme, and (b) forces the motif to accommodate the strained A/B-form hybrid conformation, in which the nicked strand tends to retain a B-type helix, while the non-nicked strand tends to form a shortened A-type helix. We propose that this conformation is the catalytically competent transition state, which leads to the formation of the DNA-AMP intermediate and to the subsequent sealing of the nick.

Making AppDNA using T4 DNA ligase

5('),5(')-Adenylyl pyrophosphoryl DNA (AppDNA) contains a high-energy pyrophosphate linkage and can be exploited as an activated DNA substrate to derive new DNA enzymes for carrying out various DNA modification reactions. For this reason, enzymatic synthesis of AppDNA is highly desirable. AppDNA is a known intermediate in DNA ligase mediated DNA ligation reactions, but rarely accumulates under normal reaction conditions. Here we report that T4 DNA ligase can quantitatively convert 5(')-phosphoryl DNA donor into AppDNA in the absence of acceptor DNA but in the presence of a template DNA that contains at least one unpaired nucleotide opposite the 5(')-phosphoryl DNA donor site. This adenylylation behavior of T4 DNA ligase is not observed with Thermus aquaticus (Taq) and Escherichia coli DNA ligases. We further found that a donor-template duplex of 11-bp in length is required by T4 DNA ligase for the formation of AppDNA.

Conserved residues in domain Ia are required for the reaction of Escherichia coli DNA ligase with NAD+

NAD(+)-dependent DNA ligases are present in all bacteria and are essential for growth. Their unique substrate specificity compared with ATP-dependent human DNA ligases recommends the NAD(+) ligases as targets for the development of new broad-spectrum antibiotics. A plausible strategy for drug discovery is to identify the structural components of bacterial DNA ligase that interact with NAD(+) and then to isolate small molecules that recognize these components and thereby block the binding of NAD(+) to the ligase. The limitation to this strategy is that the structural determinants of NAD(+) specificity are not known. Here we show that reactivity of Escherichia coli DNA ligase (LigA) with NAD(+) requires N-terminal domain Ia, which is unique to, and conserved among, NAD(+) ligases but absent from ATP-dependent ligases. Deletion of domain Ia abolished the sealing of 3'-OH/5'-PO(4) nicks and the reaction with NAD(+) to form ligase-adenylate but had no effect on phosphodiester formation at a preadenylated nick. Alanine substitutions at conserved residues within domain Ia either reduced (His-23, Tyr-35) or abolished (Tyr-22, Asp-32, Asp-36) sealing of a 5'-PO(4) nick and adenylyl transfer from NAD(+) without affecting ligation of pre-formed DNA-adenylate. We suggest that these five side chains comprise a binding site for the nicotinamide mononucleotide moiety of NAD(+). Structure-activity relationships were clarified by conservative substitutions.

Role of nucleotidyl transferase motif V in strand joining by chlorella virus DNA ligase

ATP-dependent DNA ligases, NAD(+)-dependent DNA ligases, and GTP-dependent RNA capping enzymes are members of a covalent nucleotidyl transferase superfamily defined by a common fold and a set of conserved peptide motifs. Here we examined the role of nucleotidyl transferase motif V ((184)LLKMKQFKDAEAT(196)) in the nick joining reaction of Chlorella virus DNA ligase, an exemplary ATP-dependent enzyme. We found that alanine substitutions at Lys(186), Lys(188), Asp(192), and Glu(194) reduced ligase specific activity by at least an order of magnitude, whereas substitutions at Lys(191) and Thr(196) were benign. The K186A, D192A, and E194A changes had no effect on the rate of single-turnover nick joining by preformed ligase-adenylate but affected subsequent rounds of nick joining at the ligase adenylation step. Conservative substitutions K186R, D192E, and E194D partially restored activity, whereas K186Q, D192N, and E194Q substitutions did not. Alanine mutation of Lys(188) elicited distinctive catalytic defects, whereby single-turnover nick joining by K188A-adenylate was slowed by an order of magnitude, and high levels of the DNA-adenylate intermediate accumulated. The rate of phosphodiester bond formation at a pre-adenylated nick (step 3 of the ligation pathway) was slowed by the K188A change. Replacement of Lys(188) by arginine reversed the step 3 arrest, whereas glutamine substitution was ineffective. Gel-shift analysis showed that the Lys(188) mutants bound stably to DNA-adenylate. We infer that Lys(188) is involved in the chemical step of phosphodiester bond formation.

Thermus scotoductus and Rhodothermus marinus DNA ligases have higher ligation efficiencies than thermus thermophilus DNA ligase

To mimic large numbers of nicked DNA duplexes we used a technique that produces nicked duplex DNA substrates by hybridization of complementary oligonucleotides, adjacent to an initiating primer, which are ligated together by a thermostable DNA ligase. Sequential ligation of nonanucleotides to this primary duplex results in the formation of polymers that can be analyzed by gel electrophoresis. The extent of polymerization is a measure of the efficiency of ligation. We determined the efficiency of ligation of nonanucleotides, using various length initiating primers, with three thermostable DNA ligases: Thermus thermophilus (Tth), Thermus scotoductus (Ts), and Rhodothermus marinus (Rm). Analysis of the effect of temperature for each ligase, and for each directing primer length, revealed that at 37 and 41 degrees C there was variation between ligase efficiency in the order Rm > or = Ts > or = Tth. The higher temperature of 46 degrees C was optimal for polymerization with each of the ligases and Rm ligase was the most efficient. Analysis of directionality of the ligations reactions suggests that for each of the Thermus ligases we tested, there was a bias to polymerization of nonanucleotides in a 5'-3' direction.

Role of nucleotidyltransferase motifs I, III and IV in the catalysis of phosphodiester bond formation by Chlorella virus DNA ligase

ATP-dependent DNA ligases catalyze the sealing of 5'-phosphate and 3'-hydroxyl termini at DNA nicks by means of a series of three nucleotidyl transfer steps. Here we have analyzed by site-directed mutagenesis the roles of conserved amino acids of Chlorella virus DNA ligase during the third step of the ligation pathway, which entails reaction of the 3'-OH of the nick with the DNA-adenylate intermediate to form a phosphodiester and release AMP. We found that Asp65 and Glu67 in nucleotidyltransferase motif III and Glu161 in motif IV enhance the rate of step 3 phosphodiester formation by factors of 20, 1000 and 60, respectively. Asp29 and Arg32 in nucleotidyltransferase motif I enhance the rate of step 3 by 60-fold. Gel shift analysis showed that mutations of Arg32 and Asp65 suppressed ligase binding to a pre-adenylated nick, whereas Asp29, Glu67 and Glu161 mutants bound stably to DNA-adenylate. We infer that Asp29, Glu67 and Glu161 are involved directly in the step 3 reaction. In several cases, the effects of alanine or conservative mutations on step 3 were modest compared to their effects on the composite ligation reaction and individual upstream steps. These results, in concert with available crystallographic data, suggest that the active site of DNA ligase is remodeled during the three steps of the pathway and that some of the catalytic side chains play distinct roles at different stages.

More keys to padlock probes: mechanisms for high-throughput nucleic acid analysis

With the impending availability of total information about nucleic acid sequences in humans and other organisms, tools to investigate these sequences on a large scale assume increasing importance. Methods currently in use, however, cannot offer the required combination of high-throughput, sensitivity and specificity of detection. Padlock probes, circularizing oligonucleotides, may provide a means to detect, distinguish, quantitate and also locate very large numbers of DNA or RNA sequences. Recent developments in areas such as the biochemistry of ligation and characterization of ligases, methods to replicate circularized probes and the development of assays based on these principles augment the potential of padlock probes.

Structural and mechanistic conservation in DNA ligases

DNA ligases are enzymes required for the repair, replication and recombination of DNA. DNA ligases catalyse the formation of phosphodiester bonds at single-strand breaks in double-stranded DNA. Despite their occurrence in all organisms, DNA ligases show a wide diversity of amino acid sequences, molecular sizes and properties. The enzymes fall into two groups based on their cofactor specificity, those requiring NAD(+) for activity and those requiring ATP. The eukaryotic, viral and archael bacteria encoded enzymes all require ATP. NAD(+)-requiring DNA ligases have only been found in prokaryotic organisms. Recently, the crystal structures of a number of DNA ligases have been reported. It is the purpose of this review to summarise the current knowledge of the structure and catalytic mechanism of DNA ligases.

Crystal structure of eukaryotic DNA ligase-adenylate illuminates the mechanism of nick sensing and strand joining

Chlorella virus DNA ligase is the smallest eukaryotic ATP-dependent ligase known; it has an intrinsic nick-sensing function and suffices for yeast cell growth. Here, we report the 2.0 A crystal structure of the covalent ligase-AMP reaction intermediate. The conformation of the adenosine nucleoside and contacts between the enzyme and the ribose sugar have undergone a significant change compared to complexes of T7 ligase with ATP or mRNA capping enzyme with GTP. The conformational switch allows the 3' OH of AMP to coordinate directly the 5' PO(4) of the nick. The structure explains why nick sensing is restricted to adenylated ligase and why the 5' phosphate is required for DNA binding. We identify a metal binding site on ligase-adenylate and propose a mechanism of nick recognition and catalysis supported by mutational data.

The DNA ligase III zinc finger stimulates binding to DNA secondary structure and promotes end joining

The ability to rejoin broken chromosomes is fundamental to the maintenance of genetic integrity. Mammalian cells possess at least five DNA ligases, including three isoforms of DNA ligase III (Lig-3). Lig-3 proteins differ from other DNA ligases in the presence of an N-terminal zinc finger (Zn-f) motif that exhibits extensive homology with two zinc fingers in poly(ADP-ribose) polymerase (PARP). Here we report that the Zn-f confers upon Lig-3 the ability to bind DNA duplexes harbouring a variety of DNA secondary structures, including single-strand gaps and single-strand flaps. Moreover, the Zn-f stimulates intermolecular end joining of duplexes that harbour these structures up to 16-fold. The Zn-f also stimulates end joining between duplexes lacking secondary structure, but to a lesser extent (up to 4-fold). We conclude that the Zn-f may enable Lig-3 to rejoin chromosomal DNA strand breaks located at sites of clustered damage induced by ionising radiation or near to secondary structure intermediates of DNA metabolism.

DNA ligases in the repair and replication of DNA

DNA ligases are critical enzymes of DNA metabolism. The reaction they catalyse (the joining of nicked DNA) is required in DNA replication and in DNA repair pathways that require the re-synthesis of DNA. Most organisms express DNA ligases powered by ATP, but eubacteria appear to be unique in having ligases driven by NAD(+). Interestingly, despite protein sequence and biochemical differences between the two classes of ligase, the structure of the adenylation domain is remarkably similar. Higher organisms express a variety of different ligases, which appear to be targetted to specific functions. DNA ligase I is required for Okazaki fragment joining and some repair pathways; DNA ligase II appears to be a degradation product of ligase III; DNA ligase III has several isoforms, which are involved in repair and recombination and DNA ligase IV is necessary for V(D)J recombination and non-homologous end-joining. Sequence and structural analysis of DNA ligases has shown that these enzymes are built around a common catalytic core, which is likely to be similar in three-dimensional structure to that of T7-bacteriophage ligase. The differences between the various ligases are likely to be mediated by regions outside of this common core, the structures of which are not known. Therefore, the determination of these structures, along with the structures of ligases bound to substrate DNAs and partner proteins ought to be seen as a priority.

Characterization of an ATP-dependent DNA ligase from the thermophilic archaeon Methanobacterium thermoautotrophicum

We report the production, purification and characterization of a DNA ligase encoded by the thermophilic archaeon Methanobacterium thermoautotrophicum. The 561 amino acid MTH: ligase catalyzed strand-joining on a singly nicked DNA in the presence of a divalent cation (magnesium, manganese or cobalt) and ATP (K(m) 1.1 microM). dATP can substitute for ATP, but CTP, GTP, UTP and NAD(+) cannot. MTH: ligase activity is thermophilic in vitro, with optimal nick-joining at 60 degrees C. Mutational analysis of the conserved active site motif I (KxDG) illuminated essential roles for Lys251 and Asp253 at different steps of the ligation reaction. Mutant K251A is unable to form the covalent ligase-adenylate intermediate (step 1) and hence cannot seal a 3'-OH/5'-PO(4) nick. Yet, K251A catalyzes phosphodiester bond formation at a pre-adenylated nick (step 3). Mutant D253A is active in ligase-adenylate formation, but defective in activating the nick via formation of the DNA-adenylate intermediate (step 2). D253A is also impaired in phosphodiester bond formation at a pre-adenylated nick. A profound step 3 arrest, with accumulation of high levels of DNA-adenylate, could be elicited for the wild-type MTH: ligase by inclusion of calcium as the divalent cation cofactor. MTH: ligase sediments as a monomer in a glycerol gradient. Structure probing by limited proteolysis suggested that MTH: ligase is a tightly folded protein punctuated by a surface-accessible loop between nucleotidyl transferase motifs III and IIIa.

Ligation reaction specificities of an NAD(+)-dependent DNA ligase from the hyperthermophile Aquifex aeolicus

An NAD(+)-dependent DNA ligase from the hyperthermophilic bacterium Aquifex aeolicus was cloned, expressed in Escherichia coli and purified to homogeneity. The enzyme is most active in slightly alkaline pH conditions with either Mg(2+)or Mn(2+)as the metal cofactor. Ca(2+)and Ni(2+)mainly support formation of DNA-adenylate intermediates. The catalytic cycle is characterized by a low k (cat)value of 2 min(-1)with concomitant accumulation of the DNA - adenylate intermediate when Mg(2+)is used as the metal cofactor. The ligation rates of matched substrates vary by up to 4-fold, but exhibit a general trend of T/A < or = G/C < C/G < A/T on both the 3'- and 5'-side of the nick. Consistent with previous studies on Thermus ligases, this Aquifex ligase exhibits greater discrimination against a mismatched base pair on the 3'-side of the nick junction. The requirement of 3' complementarity for a ligation reaction is reaffirmed by results from 1 nt insertions on either the 3'- or 5'-side of the nick. Furthermore, most of the unligatable 3' mismatched base pairs prohibit formation of the DNA-adenylate intermediate, indicating that the substrate adenylation step is also a control point for ligation fidelity. Unlike previously studied ATP ligases, gapped substrates cannot be ligated and intermediate accumulation is minimal, suggesting that complete elimination of base pair complementarity on one side of the nick affects substrate adenylation on the 5'-side of the nick junction. Relationships among metal cofactors, ligation products and intermediate, and ligation fidelity are discussed.