Refolded outer membrane protein A of Escherichia coli forms ion channels with two conductance states in planar lipid bilayers

NlpE Is an OmpA-Associated Outer Membrane Sensor of the Cpx Envelope Stress Response

Gram-negative bacteria utilize several envelope stress responses (ESRs) to sense and respond to diverse signals within a multilayered cell envelope. The CpxRA ESR responds to multiple stresses that perturb envelope protein homeostasis. Signaling in the Cpx response is regulated by auxiliary factors, such as the outer membrane (OM) lipoprotein NlpE, an activator of the response. NlpE communicates surface adhesion to the Cpx response; however, the mechanism by which NlpE accomplishes this remains unknown. In this study, we report a novel interaction between NlpE and the major OM protein OmpA. Both NlpE and OmpA are required to activate the Cpx response in surface-adhered cells. Furthermore, NlpE senses OmpA overexpression and the NlpE C-terminal domain transduces this signal to the Cpx response, revealing a novel signaling function for this domain. Mutation of OmpA peptidoglycan-binding residues abrogates signaling during OmpA overexpression, suggesting that NlpE signaling from the OM through the cell wall is coordinated via OmpA. Overall, these findings reveal NlpE to be a versatile envelope sensor that takes advantage of its structure, localization, and cooperation with other envelope proteins to initiate adaptation to diverse signals. IMPORTANCE The envelope is not only a barrier that protects bacteria from the environment but also a crucial site for the transduction of signals critical for colonization and pathogenesis. The discovery of novel complexes between NlpE and OmpA contributes to an emerging understanding of the key contribution of OM β-barrel protein and lipoprotein complexes to envelope stress signaling. Overall, our findings provide mechanistic insight into how the Cpx response senses signals relevant to surface adhesion and biofilm growth to facilitate bacterial adaptation.

Role of the Mycobacterium tuberculosis ESX-4 Secretion System in Heme Iron Utilization and Pore Formation by PPE Proteins

Mycobacterium tuberculosis (Mtb) is transmitted through aerosols and primarily colonizes within the lung. The World Health Organization estimates that Mtb kills ~1.4 million people every year. A key aspect that makes Mtb such a successful pathogen is its ability to overcome iron limitation mounted by the host immune response. In our previous studies, we have shown that Mtb can utilize iron from heme, the largest source of iron in the human host, and that it uses two redundant heme utilization pathways. In this study, we show that the ESX-4 type VII secretion system (T7SS) is necessary for extracellular heme uptake into the Mtb cell through both heme utilization pathways. ESX-4 influences the secretion of the culture filtrate proteins Rv0125 and Rv1085c, which are also necessary for efficient heme utilization. We also discovered that deletion of the alternative sigma factor SigM significantly reduced Mtb heme utilization through both pathways and predict that SigM is a global positive regulator of core heme utilization genes of both pathways. Finally, we present the first direct evidence that some mycobacterial PPE (proline-proline-glutamate motif) proteins of the PPE protein family are pore-forming membrane proteins. Altogether, we identified core components of both Mtb Heme utilization pathways that were previously unknown and identified a novel channel-forming membrane protein of Mtb. IMPORTANCE M. tuberculosis (Mtb) is completely dependent on iron acquisition in the host to cause disease. The largest source of iron for Mtb in the human host is heme. Here, we show that the ancestral ESX-4 type VII secretion system is required for the efficient utilization of heme as a source of iron, which is an essential nutrient. This is another biological function identified for ESX-4 in Mtb, whose contribution to Mtb physiology is poorly understood. A most exciting finding is that some mycobacterial PPE (proline-proline-glutamate motif) proteins that have been implicated in the nutrient acquisition are membrane proteins that can form channels in a lipid bilayer. These observations have far-reaching implications because they support an emerging theme that PPE proteins can function as channel proteins in the outer mycomembrane for nutrient acquisition. Mtb has evolved a heme uptake system that is drastically different from all other known bacterial heme acquisition systems.

What have molecular simulations contributed to understanding of Gram-negative bacterial cell envelopes?

Bacterial cell envelopes are compositionally complex and crowded and while highly dynamic in some areas, their molecular motion is very limited, to the point of being almost static in others. Therefore, it is no real surprise that studying them at high resolution across a range of temporal and spatial scales requires a number of different techniques. Details at atomistic to molecular scales for up to tens of microseconds are now within range for molecular dynamics simulations. Here we review how such simulations have contributed to our current understanding of the cell envelopes of Gram-negative bacteria.

Architects of their own environment: How membrane proteins shape the Gram-negative cell envelope

Gram-negative bacteria are surrounded by a complex multilayered cell envelope, consisting of an inner and an outer membrane, and separated by the aqueous periplasm, which contains a thin peptidoglycan cell wall. These bacteria employ an arsenal of highly specialized membrane protein machineries to ensure the correct assembly and maintenance of the membranes forming the cell envelope. Here, we review the diverse protein systems, which perform these functions in Escherichia coli, such as the folding and insertion of membrane proteins, the transport of lipoproteins and lipopolysaccharide within the cell envelope, the targeting of phospholipids, and the regulation of mistargeted envelope components. Some of these protein machineries have been known for a long time, yet still hold surprises. Others have only recently been described and some are still missing pieces or yet remain to be discovered.

Screening of anti-Acinetobacter baumannii phytochemicals, based on the potential inhibitory effect on OmpA and OmpW functions

Therapeutic options including last-line or combined antibiotic therapies for multi-drug-resistant strains of Acinetobacter baumannii are ineffective. The outer membrane protein A (OmpA) and outer membrane protein W (OmpW) are two porins known for their different cellular functions. Identification of natural compounds with the potentials to block these putative porins can attenuate the growth of the bacteria and control the relating diseases. The current work aimed to screen a library of 384 phytochemicals according to their potentials to be used as a drug, and potentials to inhibit the function of OmpA and OmpW in A. baumannii. The phytocompounds were initially screened based on their physico-chemical, absorption, distribution, metabolism, excretion and toxicity (ADMET) drug-like properties. Afterwards, the selected ligands were subjected to standard docking calculations against the predicted three-dimensional structure of OmpA and OmpW in A. baumannii. We identified three phytochemicals (isosakuranetin, aloe-emodin and pinocembrin) possessing appreciable binding affinity towards the selected binding pocket of OmpA and OmpW. Molecular dynamics simulation analysis confirmed the stability of the complexes. Among them, isosakuranetin was suggested as the best phytocompound for further in vitro and in vivo study.

In-Cell Labeling and Mass Spectrometry for Systems-Level Structural Biology

Biological systems have evolved to utilize proteins to accomplish nearly all functional roles needed to sustain life. A majority of biological functions occur within the crowded environment inside cells and subcellular compartments where proteins exist in a densely packed complex network of protein-protein interactions. The structural biology field has experienced a renaissance with recent advances in crystallography, NMR, and CryoEM that now produce stunning models of large and complex structures previously unimaginable. Nevertheless, measurements of such structural detail within cellular environments remain elusive. This review will highlight how advances in mass spectrometry, chemical labeling, and informatics capabilities are merging to provide structural insights on proteins, complexes, and networks that exist inside cells. Because of the molecular detection specificity provided by mass spectrometry and proteomics, these approaches provide systems-level information that not only benefits from conventional structural analysis, but also is highly complementary. Although far from comprehensive in their current form, these approaches are currently providing systems structural biology information that can uniquely reveal how conformations and interactions involving many proteins change inside cells with perturbations such as disease, drug treatment, or phenotypic differences. With continued advancements and more widespread adaptation, systems structural biology based on in-cell labeling and mass spectrometry will provide an even greater wealth of structural knowledge.

Outer Membrane Vesicles (OMVs) Produced by Gram-Negative Bacteria: Structure, Functions, Biogenesis, and Vaccine Application

Gram-negative bacteria produce outer membrane vesicles (OMVs) with 10 to 300 nm of diameter. The contribution of OMVs to bacterial pathogenesis is a topic of great interest, and their capacity to be combined with antigens impact in the future to the development of vaccines.

Folding of β-Barrel Membrane Proteins into Lipid Membranes by Site-Directed Fluorescence Spectroscopy

Protein-lipid interactions are important for folding and membrane insertion of integral membrane proteins that are composed either of α-helical or of β-barrel structure in their transmembrane domains. While α-helical transmembrane proteins fold co-translationally while they are synthesized by a ribosome, β-barrel transmembrane proteins (β-TMPs) fold and insert posttranslationally-in bacteria after translocation across the cytoplasmic membrane, in cell organelles of eukaryotes after import across the outer membrane of the organelle. β-TMPs can be unfolded in aqueous solutions of chaotropic denaturants like urea and spontaneously refold upon denaturant dilution in the presence of preformed lipid bilayers. This facilitates studies on lipid interactions during folding into lipid bilayers. For several β-TMPs, the kinetics of folding has been reported as strongly dependent on protein-lipid interactions. The kinetics of adsorption/insertion and folding of β-TMPs can be monitored by fluorescence spectroscopy. These fluorescence methods are even more powerful when combined with site-directed mutagenesis for the preparation of mutants of a β-TMP that are site-specifically labeled with a fluorophore or a fluorophore and fluorescence quencher or fluorescence resonance energy acceptor. Single tryptophan or single cysteine mutants of the β-TMP allow for the investigation of local protein-lipid interactions, at specific regions within the protein. To examine the structure formation of β-TMPs in a lipid environment, fluorescence spectroscopy has been used for double mutants of β-TMPs that contain a fluorescent tryptophan and a spin-label, covalently attached to a cysteine as a fluorescence quencher. The sites of mutation are selected so that the tryptophan is in close proximity to the quencher at the cysteine only when the β-TMP is folded. In a folding experiment, the evolution of fluorescence quenching as a function of time at specific sites within the protein can provide important information on the folding mechanism of the β-TMP. Here, we report protocols to examine membrane protein folding for two β-TMPs in a lipid environment, the outer membrane protein A from Escherichia coli, OmpA, and the voltage-dependent anion-selective channel, human isoform 1, hVDAC1, from mitochondria.

Kinetics of Insertion and Folding of Outer Membrane Proteins by Gel Electrophoresis

To examine the mechanisms of folding and insertion of TMPs into membranes, kinetic studies are instrumental, for example, for the analysis of folding steps and involved intermediates or for the determination of activation energies. For many β-barrel transmembrane proteins (β-TMPs) it has been shown that the folded, functional form can be separated from the unfolded form by a simple electrophoretic mobility assay. The only requirements for a separation by SDS-polyacrylamide gel electrophoresis (SDS-PAGE) are that the folded form is sufficiently stable and that the samples are not heat-denatured before the electrophoresis is performed. Many folded β-TMPs resist the treatment with SDS at room temperature and are stable against forces during electrophoresis. On the other side, SDS also binds to unfolded forms of β-TMPs and prevents their folding into β-barrel structure. These observations have been used to develop a simple assay to monitor the kinetics of β-barrel tertiary structure formation in a membrane environment by electrophoresis. A folding reaction of a β-TMP is initiated by dilution of the denaturant in the presence of preformed lipid bilayers, proteoliposomes or membrane vesicles. At selected times, samples are taken from the reaction. In these samples, folding is stopped by addition of SDS. At the end of the entire folding reaction, all samples are analyzed by SDS-PAGE and the fractions of folded β-TMP that they contain are determined by densitometry.An advantage of this kinetic assay is that it not only allows a direct determination of fractions of folded and unfolded forms at a selected time during folding of the β-TMP into a membrane, but also facilitates the determination of the impact of folding factors (e.g., molecular chaperones) or folding machinery that most often have a different molecular mass and electrophoretic mobility. The assay has been very useful to examine how folding and insertion is affected by the structure of the phospholipids in the lipid bilayer and how folding machinery compensates for the presence of membrane lipids that retard folding and insertion of β-TMPs.

Outer Membrane Protein of Gut Commensal Microorganism Induces Autoantibody Production and Extra-Intestinal Gland Inflammation in Mice

Gut commensal microorganisms have been linked with chronic inflammation at the extra-intestinal niche of the body. The object of the study was to investigate on the chronic effects of a gut commensal Escherichia coli on extra-intestinal glands. The presence of autoimmune response was diagnosed by autoantibody levels and histological methods. Repeated injection of E. coli induced mononuclear cell inflammation in the Harderian and submandibular salivary glands of female C57BL/6 mice. Inflammation was reproduced by adoptive transfer of splenocytes to immune-deficient Rag2 knockout mice and CD4⁺ T cells to mature T cell-deficient TCRβ-TCRδ knockout mice. MALDI TOF mass spectrometry of the protein to which sera of E. coli-treated mice reacted was determined as the outer membrane protein A (OmpA) of E. coli. Multiple genera of the Enterobacteriaceae possessed OmpA with high amino-acid sequence similarities. Repeated injection of recombinant OmpA reproduced mononuclear cell inflammation of the Harderian and salivary glands in mice and elevation of autoantibodies against Sjögren’s-syndrome-related antigens SSA/Ro and SSB/La. The results indicated the possibility of chronic stimuli from commensal bacteria-originated components as a pathogenic factor to elicit extra-intestinal autoimmunity.

Comparative Analyses of Transport Proteins Encoded within the Genomes of Bdellovibrio bacteriovorus HD100 and Bdellovibrio exovorus JSS

Bdellovibrio, δ-proteobacteria, including B. bacteriovorus (Bba) and B. exovorus (Bex), are obligate predators of other Gram-negative bacteria. While Bba grows in the periplasm of the prey cell, Bex grows externally. We have analyzed and compared the transport proteins of these 2 organisms based on the current contents of the Transporter Classification Database (TCDB; www.tcdb.org). Bba has 103 transporters more than Bex, 50% more secondary carriers, and 3 times as many MFS carriers. Bba has far more metabolite transporters than Bex as expected from its larger genome, but there are 2 times more carbohydrate uptake and drug efflux systems, and 3 times more lipid transporters. Bba also has polyamine and carboxylate transporters lacking in Bex. Bba has more than twice as many members of the Mot-Exb family of energizers, but both may have energizers for gliding motility. They use entirely different types of systems for iron acquisition. Both contain unexpectedly large numbers of pseudogenes and incomplete systems, suggesting that they are undergoing genome size reduction. Interestingly, all 5 outer-membrane receptors in Bba are lacking in Bex. The 2 organisms have similar numbers and types of peptide and amino acid uptake systems as well as protein and carbohydrate secretion systems. The differences observed correlate with and may account, in part, for the different lifestyles of these 2 bacterial predators.

Braun's Lipoprotein Facilitates OmpA Interaction with the Escherichia coli Cell Wall

Gram-negative bacteria such as Escherichia coli are protected by a complex cell envelope. The development of novel therapeutics against these bacteria necessitates a molecular level understanding of the structure-dynamics-function relationships of the various components of the cell envelope. We use atomistic MD simulations to reveal the details of covalent and noncovalent protein interactions that link the outer membrane to the aqueous periplasmic region. We show that the Braun's lipoprotein tilts and bends, and thereby lifts the cell wall closer to the outer membrane. Both monomers and dimers of the outer membrane porin OmpA can interact with peptidoglycan in the presence of Braun's lipoprotein, but in the absence of the latter, only dimers of OmpA show a propensity to form contacts with peptidoglycan. Our study provides a glimpse of how the molecular components of the bacterial cell envelope interact with each other to mediate cell wall attachment in E. coli.

Allelic Variation in Outer Membrane Protein A and Its Influence on Attachment of Escherichia coli to Corn Stover

Understanding the genetic factors that govern microbe-sediment interactions in aquatic environments is important for water quality management and reduction of waterborne disease outbreaks. Although chemical properties of bacteria have been identified that contribute to initiation of attachment, the outer membrane proteins that contribute to these chemical properties still remain unclear. In this study we explored the attachment of 78 Escherichia coli environmental isolates to corn stover, a representative agricultural residue. Outer membrane proteome analysis led to the observation of amino acid variations, some of which had not been previously described, in outer membrane protein A (OmpA) at 10 distinct locations, including each of the four extracellular loops, three of the eight transmembrane segments, the proline-rich linker and the dimerization domain. Some of the polymorphisms within loops 1, 2, and 3 were found to significantly co-occur. Grouping of sequences according to the outer loop polymorphisms revealed five distinct patterns that each occur in at least 5% of our isolates. The two most common patterns, I and II, are encoded by 33.3 and 20.5% of these isolates and differ at each of the four loops. Statistically significant differences in attachment to corn stover were observed among isolates expressing different versions of OmpA and when different versions of OmpA were expressed in the same genetic background. Most notable was the increased corn stover attachment associated with a loop 3 sequence of SNFDGKN relative to the standard SNVYGKN sequence. These results provide further insight into the allelic variation of OmpA and implicate OmpA in contributing to attachment to corn stover.

OmpA: A Flexible Clamp for Bacterial Cell Wall Attachment

The envelope of Gram-negative bacteria is highly complex, containing separate outer and inner membranes and an intervening periplasmic space encompassing a peptidoglycan (PGN) cell wall. The PGN scaffold is anchored non-covalently to the outer membrane via globular OmpA-like domains of various proteins. We report atomically detailed simulations of PGN bound to OmpA in three different states, including the isolated C-terminal domain (CTD), the full-length monomer, or the complete full-length dimeric form. Comparative analysis of dynamics of OmpA CTD from different bacteria helped to identify a conserved PGN-binding mode. The dynamics of full-length OmpA, embedded within a realistic representation of the outer membrane containing full-rough (Ra) lipopolysaccharide, phospholipids, and cardiolipin, suggested how the protein may provide flexible mechanical support to the cell wall. An accurate model of the heterogeneous bacterial cell envelope should facilitate future efforts to develop antibacterial agents.

The Transmembrane Domain of a Bicomponent ABC Transporter Exhibits Channel-Forming Activity

Pseudomonas aeruginosa is an opportunistic pathogen that expresses two unique forms of lipopolysaccharides (LPSs) on its bacterial surface, the A- and B-bands. The A-band polysaccharides (A-band PSs) are thought to be exported into the periplasm via a bicomponent ATP-binding cassette (ABC) transporter located within the inner membrane. This ABC protein complex consists of the transmembrane (TMD) Wzm and nucleotide-binding (NBD) Wzt domain proteins. Here, we were able to probe ∼1.36 nS-average conductance openings of the Wzm-based protein complex when reconstituted into a lipid membrane buffered by a 200 mM KCl solution, demonstrating the large-conductance, channel-forming ability of the TMDs. In agreement with this finding, transmission electron microscopy (TEM) imaging revealed the ring-shaped structure of the transmembrane Wzm protein complex. As hypothesized, using liposomes, we demonstrated that Wzm interacts with Wzt. Further, the Wzt polypeptide indeed hydrolyzed ATP but exhibited a ∼75% reduction in the ATPase activity when its Walker A domain was deleted. The distribution and average unitary conductance of the TMD Wzm protein complex were altered by the presence of the NBD Wzt protein, confirming the regulatory role of the latter polypeptide. To our knowledge, the large-conductance, channel-like activity of the Wzm protein complex, although often hypothesized, has not previously been demonstrated. These results constitute a platform for future structural, biophysical, and functional explorations of this bicomponent ABC transporter.

Colicins U and Y inhibit growth of Escherichia coli strains via recognition of conserved OmpA extracellular loop 1

Interactions of colicins U and Y with the OmpA (Outer membrane protein A) receptor molecule were studied using site-directed mutagenesis and colicin binding assay. A systematic mutagenesis of the colicin-susceptible OmpA sequence from Escherichia coli (OmpA_EC) to the colicin-resistant OmpA sequence from Serratia marcescens (OmpA_SM) was performed in regions corresponding to extracellular OmpA loops 1-4. Susceptibility to colicins U and Y was significantly affected by the OmpA mutation in loop 1. As with functional analysis, a decrease in binding capacity of His-tagged colicin U was found for recombinant OmpA with a mutated segment in loop 1 compared to control OmpA_EC. To verify the importance of the identified amino acid residues in OmpA loop 1, we introduced loop 1 from OmpA_EC into OmpA_SM, which resulted in the substantial increase of susceptibility to colicins U and Y. In addition, colicins U and Y were tested against a panel of 118 bacteriocin non-producing strains of four Escherichia species, including E. coli (39 strains), E. fergusonii (10 strains), E. hermannii (42 strains), and E. vulneris (27 strains). A majority (82%) of E. coli strains was susceptible to colicins U and Y. Interestingly, colicins U and Y also inhibited all of the 30 tested multidrug-resistant E. coli O25b-ST131 isolates. These findings, together with the fact that OmpA loop 1 is important for bacterial virulence and is evolutionary conserved, offer the potential of using colicins U and Y as specific anti-OmpA loop 1 directed antibacterial proteins.

Global redesign of a native β-barrel scaffold

One persistent challenge in membrane protein design is accomplishing extensive modifications of proteins without impairing their functionality. A truncation derivative of the ferric hydroxamate uptake component A (FhuA), which featured the deletion of the 160-residue cork domain and five large extracellular loops, produced the conversion of a non-conductive, monomeric, 22-stranded β-barrel protein into a large-conductance protein pore. Here, we show that this redesigned β-barrel protein tolerates an extensive alteration in the internal surface charge, encompassing 25 negative charge neutralizations. By using single-molecule electrophysiology, we noted that a commonality of various truncation FhuA protein pores was the occurrence of 33% blockades of the unitary current at very high transmembrane potentials. We determined that these current transitions were stimulated by their interaction with an external cationic polypeptide, which occurred in a fashion dependent on the surface charge of the pore interior as well as the polypeptide characteristics. This study shows promise for extensive engineering of a large monomeric β-barrel protein pore in molecular biomedical diagnosis, therapeutics, and biosensor technology.

Folding of β-barrel membrane proteins in lipid bilayers - Unassisted and assisted folding and insertion

In cells, β-barrel membrane proteins are transported in unfolded form to an outer membrane into which they fold and insert. Model systems have been established to investigate the mechanisms of insertion and folding of these versatile proteins into detergent micelles, lipid bilayers and even synthetic amphipathic polymers. In these experiments, insertion into lipid membranes is initiated from unfolded forms that do not display residual β-sheet secondary structure. These studies therefore have allowed the investigation of membrane protein folding and insertion in great detail. Folding of β-barrel membrane proteins into lipid bilayers has been monitored from unfolded forms by dilution of chaotropic denaturants that keep the protein unfolded as well as from unfolded forms present in complexes with molecular chaperones from cells. This review is aimed to provide an overview of the principles and mechanisms observed for the folding of β-barrel transmembrane proteins into lipid bilayers, the importance of lipid-protein interactions and the function of molecular chaperones and folding assistants. This article is part of a Special Issue entitled: Lipid-protein interactions.

A combined approach to heat stress effect on male fertility in Nasonia vitripennis: from the physiological consequences on spermatogenesis to the reproductive adjustment of females mated with stressed males

In recent years, several studies have shown a decline in reproductive success in males in both humans and wildlife. Research on male fertility has largely focused on vertebrates, although invertebrates constitute the vast majority of terrestrial biodiversity. The reduction of their reproductive capacities due to environmental stresses can have strong negative ecological impacts, and also dramatic consequences on world food production if it affects the reproductive success of biological control agents, such as parasitic wasps used to control crop pests. Here Nasonia vitripennis, a parasitic wasp of various fly species, was studied to test the effects of 24h-heat stress applied during the first pupal stage on male fertility. Results showed that only primary spermatocytes were present at the first pupal stage in all cysts of the testes. Heat stress caused a delay in spermatogenesis during development and a significant decrease in sperm stock at emergence. Females mated with these heat-stressed males showed a reduce sperm count stored in their spermatheca. Females did not appear to distinguish heat-stressed from control males and did not remate more frequently to compensate for the lack of sperm transferred. As a result, females mated with heat-stressed males produced a suboptimal lifetime offspring sex ratio compared to those mated with control males. This could further impact the population dynamics of this species. N. vitripennis appears to be an interesting biological model to study the mechanisms of subfertility and its consequence on female reproductive strategies and provides new research perspectives in both invertebrates and vertebrates.

The periplasmic domain of Escherichia coli outer membrane protein A can undergo a localized temperature dependent structural transition

Gram-negative bacteria such as Escherichia coli are surrounded by two membranes with a thin peptidoglycan (PG)-layer located in between them in the periplasmic space. The outer membrane protein A (OmpA) is a 325-residue protein and it is the major protein component of the outer membrane of E. coli. Previous structure determinations have focused on the N-terminal fragment (residues 1-171) of OmpA, which forms an eight stranded transmembrane β-barrel in the outer membrane. Consequently it was suggested that OmpA is composed of two independently folded domains in which the N-terminal β-barrel traverses the outer membrane and the C-terminal domain (residues 180-325) adopts a folded structure in the periplasmic space. However, some reports have proposed that full-length OmpA can instead refold in a temperature dependent manner into a single domain forming a larger transmembrane pore. Here, we have determined the NMR solution structure of the C-terminal periplasmic domain of E. coli OmpA (OmpA(180-325)). Our structure reveals that the C-terminal domain folds independently into a stable globular structure that is homologous to the previously reported PG-associated domain of Neisseria meningitides RmpM. Our results lend credence to the two domain structure model and a PG-binding function for OmpA, and we could indeed localize the PG-binding site on the protein through NMR chemical shift perturbation experiments. On the other hand, we found no evidence for binding of OmpA(180-325) with the TonB protein. In addition, we have also expressed and purified full-length OmpA (OmpA(1-325)) to study the structure of the full-length protein in micelles and nanodiscs by NMR spectroscopy. In both membrane mimetic environments, the recombinant OmpA maintains its two domain structure that is connected through a flexible linker. A series of temperature-dependent HSQC experiments and relaxation dispersion NMR experiments detected structural destabilization in the bulge region of the periplasmic domain of OmpA above physiological temperatures, which may induce dimerization and play a role in triggering the previously reported larger pore formation.

Mass spectrometry defines the C-terminal dimerization domain and enables modeling of the structure of full-length OmpA

The transmembrane domain of the outer membrane protein A (OmpA) from Escherichia coli is an excellent model for structural and folding studies of β-barrel membrane proteins. However, full-length OmpA resists crystallographic efforts, and the link between its function and tertiary structure remains controversial. Here we use site-directed mutagenesis and mass spectrometry of different constructs of OmpA, released in the gas phase from detergent micelles, to define the minimal region encompassing the C-terminal dimer interface. Combining knowledge of the location of the dimeric interface with molecular modeling and ion mobility data allows us to propose a low-resolution model for the full-length OmpA dimer. Our model of the dimer is in remarkable agreement with experimental ion mobility data, with none of the unfolding or collapse observed for full-length monomeric OmpA, implying that dimer formation stabilizes the overall structure and prevents collapse of the flexible linker that connects the two domains.

Salmonella enterica serovar enteritidis ghosts carrying the Escherichia coli heat-labile enterotoxin B subunit are capable of inducing enhanced protective immune responses

The Escherichia coli heat-labile enterotoxin B subunit (LTB) is a potent vaccine adjuvant. Salmonella enterica serovar Enteritidis ghosts carrying LTB (S. Enteritidis-LTB ghosts) were genetically constructed using a novel plasmid, pJHL187-LTB, designed for the coexpression of the LTB and E lysis proteins. S. Enteritidis-LTB ghosts were characterized using scanning electron microscopy to visualize their transmembrane tunnel structures. The expression of LTB in S. Enteritidis-LTB ghost preparations was confirmed by immunoblot and enzyme-linked immunosorbent assays. The parenteral adjuvant activity of LTB was demonstrated by immunizing chickens with either S. Enteritidis-LTB ghosts or S. Enteritidis ghosts. Chickens were intramuscularly primed at 5 weeks of age and subsequently boosted at 8 weeks of age. In total, 60 chickens were equally divided into three groups (n = 20 for each): group A, nonvaccinated control; group B, immunized with S. Enteritidis-LTB ghosts; and group C, immunized with S. Enteritidis ghosts. Compared with the nonimmunized chickens (group A), the immunized chickens (groups B and C) exhibited increased titers of plasma IgG and intestinal secretory IgA antibodies. The CD3(+) CD4(+) subpopulation of T cells was also significantly increased in both immunized groups. Among the immunized chickens, those in group B exhibited significantly increased titers of specific plasma IgG and intestinal secretory IgA (sIgA) antibodies compared with those in group C, indicating the immunomodulatory effects of the LTB adjuvant. Furthermore, both immunized groups exhibited decreased bacterial loads in their feces and internal organs. These results indicate that parenteral immunization with S. Enteritidis-LTB ghosts can stimulate superior induction of systemic and mucosal immune responses compared to immunization with S. Enteritidis ghosts alone, thus conferring efficient protection against salmonellosis.

Dodecyl maltoside protects membrane proteins in vacuo

Molecular dynamics simulations have been used to characterize the effects of transfer from aqueous solution to a vacuum to inform our understanding of mass spectrometry of membrane-protein-detergent complexes. We compared two membrane protein architectures (an α-helical bundle versus a β-barrel) and two different detergent types (phosphocholines versus an alkyl sugar) with respect to protein stability and detergent packing. The β-barrel membrane protein remained stable as a protein-detergent complex in vacuum. Zwitterionic detergents formed conformationally destabilizing interactions with an α-helical membrane protein after detergent micelle inversion driven by dehydration in vacuum. In contrast, a nonionic alkyl sugar detergent resisted micelle inversion, maintaining the solution-phase conformation of the protein. This helps to explain the relative stability of membrane proteins in the presence of alkyl sugar detergents such as dodecyl maltoside.

YgaE regulates out membrane proteins in Salmonella enterica serovar Typhi under hyperosmotic stress

Salmonella enterica serovar Typhi (S. Typhi) is a human-specific pathogen that causes typhoid fever. In this study, we constructed ΔygaE mutant and a microarray was performed to investigate the role of ygaE in regulation of gene expression changes in response to hyperosmotic stress in S. Typhi. qRT-PCR was performed to validate the microarray results. Our data indicated that ygaE was the repressor of gab operon in S. Typhi as in Escherichia coli (E. coli), though the sequence of ygaE is totally different from gabC (formerly ygaE) in E. coli. OmpF, OmpC, and OmpA are the most abundant out membrane proteins in S. Typhi. Here we report that YgaE is a repressor of both OmpF and OmpC at the early stage of hyperosmotic stress. Two-dimensional electrophoresis was applied to analyze proteomics of total proteins in wild-type strain and ΔygaE strain and we found that YgaE represses the expression of OmpA at the late stage of hyperosmotic stress. Altogether, our results implied that YgaE regulates out membrane proteins in a time-dependent manner under hyperosmotic stress in S. Typhi.

Modulating lipid dynamics and membrane fluidity to drive rapid folding of a transmembrane barrel

Lipid-protein interactions, critical for the folding, stability and function of membrane proteins, can be both of mechanical and chemical nature. Mechanical properties of lipid systems can be suitably influenced by physical factors so as to facilitate membrane protein folding. We demonstrate here that by modulating lipid dynamics transiently using heat, rapid folding of two 8-stranded transmembrane β-barrel proteins OmpX and OmpA^1–171, in micelles and vesicles, can be achieved within seconds. Folding kinetics using this ‘heat shock’ method shows a dramatic ten to several hundred folds increase in refolding rate along with ~100% folding efficiency. We establish that OmpX thus folded is highly thermostable even in detergent micelles, and retains structural characteristics comparable to the protein in bilayers.

Xanthomonas albilineans OmpA1 appears to be functionally modular and both the OMC and C-like domains are necessary for leaf scald disease of sugarcane

Several EZ-Tn5 insertions in gene locus XALc_0557 (OmpA1) of the sugarcane leaf scald pathogen Xanthomonas albilineans XaFL07-1 were previously found to strongly affect pathogenicity and endophytic stalk colonization. XALc_0557 has a predicted OmpA N-terminal outer membrane channel (OMC) domain and an OmpA C-like domain. Further analysis of mutant M468, with an EZ-Tn5 insertion in the upstream OMC domain coding region, revealed impaired epiphytic and endophytic leaf survival, impaired resistance to sodium dodecyl sulfate (SDS), structural defects in the outer membrane (OM), and hyperproduction of OM vesicles. Cloned full-length XALc_0557 complemented M468 for all phenotypes tested, including pathogenicity, resistance to SDS, and ability to survive both endophytically and epiphytically. Another construct, pCT47.3, which expressed only the C-like domain of XALc_0557, restored resistance to SDS in M468 but failed to complement any other mutant phenotype, indicating that the C-like domain functioned independently of the OMC domain to help maintain OM integrity. pCT47.3 also complemented pathogenicity, resistance to SDS, and stalk colonization in mutant M1152, which carries an EZ-Tn5 insert in the C-like coding region, indicating that both predicted domains are modular and necessary but neither is sufficient for X. albilineans pathogenicity, endophytic survival in, and epiphytic survival on sugarcane.

OmpC-like porin from outer membrane of Yersinia enterocolitica: molecular structure and functional activity

OmpC-like porin was isolated from the outer membrane (OM) of Yersinia enterocolitica cultured at 37°C (the "warm" variant) and its physicochemical and functional properties were studied. The amino acid sequence of OmpC porin was established, and the primary structure and transmembrane topology of this protein were analyzed in comparison with the OmpF porin isolated from Y. enterocolitica cultured at 6°C (the "cold" variant). Both porins of Y. enterocolitica had a high homology degree (65%) between themselves and with OmpC and OmpF porins from OM of Escherichia coli (58 and 76% homology, respectively). The secondary structure of OmpC and OmpF porins from OM of Y. enterocolitica consists of 16 β-strands connected by short "periplasmic" and longer "extracellular" loops with disordered structure, according to the topological model developed for porins of E. coli. The molecular structures of OmpC and OmpF porins of Y. enterocolitica have significant differences in the structure of the "extracellular" loops and in the position of one of three tryptophan residues. Using the bilayer lipid membrane (BLM) technique, pores formed by OmpC porin of Y. enterocolitica were shown to differ in electrophysiological characteristics from channels of OmpF protein of this microorganism. The isolated OmpC porin reconstructed into BLM displayed functional plasticity similarly to OmpF protein and nonspecific porins of other enterobacteria. The conductivity level of the channels formed by this protein in the BLM was regulated by value of the applied potential.

Immune response variations to Salmonella enterica serovar Typhi recombinant porin proteins in mice

OBJECTIVES

Typhoid fever is caused by Salmonella enterica serovar Typhi. OmpC, OmpF and OmpA, the three major outer membrane proteins (OMPs), could serve as vaccine candidates.

METHODS

The porins antigenicity was predicted in silico. The OMP genes were amplified, cloned and expressed. Sero-reactivities of the recombinant proteins purified by denaturing method were assayed by ELISA. BALB/c mice were immunized with the recombinant porins followed by bacterial challenge.

RESULTS

Bacterial challenge of the animal model brought about antibody triggering efficacy of the antigen in OmpF > OmpC > OmpA order. Experimental findings validated the in silico results. None of the antigens had synergic or antagonistic effects on each other from immune system induction points of view. Despite their high immunogenicity, none of the antigens was protective. However, administration of two or three antigens simultaneously resulted in retardation of lethal effect. Porins, in addition to their specific functions, share common functions. Hence, they can compensate for each other's functions.

CONCLUSIONS

The produced antibodies could not eliminate the pathogenicity by blockade of one or some of the antigens. Porin antigens are not suitable vaccine candidates alone or in denatured forms. Native forms of the antigens maybe studied for protective immunogenicity.

The role of short-chain conjugated poly-(R)-3-hydroxybutyrate (cPHB) in protein folding

Poly-(R)-3-hydroxybutyrate (PHB), a linear polymer of R-3-hydroxybutyrate (R-3HB), is a fundamental constituent of biological cells. Certain prokaryotes accumulate PHB of very high molecular weight (10,000 to >1,000,000 residues), which is segregated within granular deposits in the cytoplasm; however, all prokaryotes and all eukaryotes synthesize PHB of medium-chain length (~100-200 residues) which resides within lipid bilayers or lipid vesicles, and PHB of short-chain length (<12 residues) which is conjugated to proteins (cPHB), primarily proteins in membranes and organelles. The physical properties of cPHB indicate it plays important roles in the targeting and folding of cPHB-proteins. Here we review the occurrence, physical properties and molecular characteristics of cPHB, and discuss its influence on the folding and structure of outer membrane protein A (OmpA) of Escherichia coli.

Does the lipid environment impact the open-state conductance of an engineered β-barrel protein nanopore?

Using rational membrane protein design, we were recently able to obtain a β-barrel protein nanopore that was robust under an unusually broad range of experimental circumstances. This protein nanopore was based upon the native scaffold of the bacterial ferric hydroxamate uptake component A (FhuA) of Escherichia coli. In this work, we expanded the examinations of the open-state current of this engineered protein nanopore, also called FhuA ΔC/Δ4L, employing an array of lipid bilayer systems that contained charged and uncharged as well as conical and cylindrical lipids. Remarkably, systematical single-channel analysis of FhuA ΔC/Δ4L indicated that most of its biophysical features, such as the unitary conductance and the stability of the open-state current, were not altered under the conditions tested in this work. However, electrical recordings at high transmembrane potentials revealed that the presence of conical phospholipids within the bilayer catalyzes the first, stepwise current transition of the FhuA ΔC/Δ4L protein nanopore to a lower-conductance open state. This study reinforces the stability of the open-state current of the engineered FhuA ΔC/Δ4L protein nanopore under various experimental conditions, paving the way for further critical developments in biosensing and molecular biomedical diagnosis.

Effect of crowding by Ficolls on OmpA and OmpT refolding and membrane insertion

Folding of outer membrane proteins (OMPs) has been studied extensively in vitro. However, most of these studies have been conducted in dilute buffer solution, which is different from the crowded environment in the cell periplasm, where the folding and membrane insertion of OMPs actually occur. Using OmpA and OmpT as model proteins and Ficoll 70 as the crowding agent, here we investigated the effect of the macromolecular crowding condition on OMP membrane insertion. We found that the presence of Ficoll 70 significantly slowed down the rate of membrane insertion of OmpA while had little effect on those of OmpT. To investigate if the soluble domain of OmpA slowed down membrane insertion in the presence of the crowding agent, we created a truncated OmpA construct that contains only the transmembrane domain (OmpA171). In the absence of crowding agent, OmpA171 refolded at a similar rate as OmpA, although with decreased efficiency. However, under the crowding condition, OmpA171 refolded significantly faster than OmpA. Our results suggest that the periplasmic domain slows down the rate, while improves the efficiency, of OmpA folding and membrane insertion under the crowding condition. Such an effect was not obvious when refolding was studied in buffer solution in the absence of crowding.

Fragment screening of GPCRs using biophysical methods: identification of ligands of the adenosine A(2A) receptor with novel biological activity

Fragment-based drug discovery (FBDD) has proven a powerful method to develop novel drugs with excellent oral bioavailability against challenging pharmaceutical targets such as protein-protein interaction targets. Very recently the underlying biophysical techniques have begun to be successfully applied to membrane proteins. Here we show that novel, ligand efficient small molecules with a variety of biological activities can be found by screening a small fragment library using thermostabilized (StaR) G protein-coupled receptors (GPCRs) and target immobilized NMR screening (TINS). Detergent-solubilized StaR adenosine A(2A) receptor was immobilized with retention of functionality, and a screen of 531 fragments was performed. Hits from the screen were thoroughly characterized for biochemical activity using the wild-type receptor. Both orthosteric and allosteric modulatory activity has been demonstrated in biochemical validation assays. Allosteric activity was confirmed in cell-based functional assays. The validated fragment hits make excellent starting points for a subsequent hit-to-lead elaboration program.

Inspection of the engineered FhuA ΔC/Δ4L protein nanopore by polymer exclusion

Extensive engineering of protein nanopores for biotechnological applications using native scaffolds requires further inspection of their internal geometry and size. Recently, we redesigned ferric hydroxamate uptake component A (FhuA), a 22-β-stranded protein containing an N-terminal 160-residue cork domain (C). The cork domain and four large extracellular loops (4L) were deleted to obtain an unusually stiff engineered FhuA ΔC/Δ4L nanopore. We employed water-soluble poly(ethylene glycols) and dextran polymers to examine the interior of FhuA ΔC/Δ4L. When this nanopore was reconstituted into a synthetic planar lipid bilayer, addition of poly(ethylene glycols) produced modifications in the single-channel conductance, allowing for the evaluation of the nanopore diameter. Here, we report that FhuA ΔC/Δ4L features an approximate conical internal geometry with the cis entrance smaller than the trans entrance, in accord with the asymmetric nature of the crystal structure of the wild-type FhuA protein. Further experiments with impermeable dextran polymers indicated an average internal diameter of ~2.4 nm, a conclusion we arrived at based upon the polymer-induced alteration of the access resistance contribution to the nanopore's total resistance. Molecular insights inferred from this work represent a platform for future protein engineering of FhuA that will be employed for specific tasks in biotechnological applications.

In vivo protein complex topologies: sights through a cross-linking lens

Proteins are a remarkable class of molecules that exhibit wide diversity of shapes or topological features that underpin protein interactions and give rise to biological function. In addition to quantitation of abundance levels of proteins in biological systems under a variety of conditions, the field of proteome research has as a primary mission the assignment of function for proteins and if possible, illumination of factors that enable function. For many years, chemical cross-linking methods have been used to provide structural data on single purified proteins and purified protein complexes. However, these methods also offer the alluring possibility to extend capabilities to complex biological samples such as cell lysates or intact living cells where proteins may exhibit native topological features that do not exist in purified form. Recent efforts are beginning to provide glimpses of protein complexes and topologies in cells that suggest continued development will yield novel capabilities to view functional topological features of many proteins and complexes as they exist in cells, tissues, or other complex samples. This review will describe rationale, challenges, and a few success stories along the path of development of cross-linking technologies for measurement of in vivo protein interaction topologies.

OmpA can form folded and unfolded oligomers

The monomeric outer membrane protein OmpA from Escherichia coli has long served as a model protein for studying the folding and membrane insertion of β-barrel membrane proteins. Here we report that when OmpA is refolded in limiting amounts of surfactant (close to the cmc), it has a high propensity to form folded and unfolded oligomers. The oligomers exist both in a folded and (partially) unfolded form which both dissociate under denaturing conditions. Oligomerization does not require the involvement of the periplasmic domain and is not strongly affected by ionic strength. The folded dimers can be isolated and show native-like secondary structure; they are resistant to proteolytic attack and do not dissociate in high surfactant concentrations, indicating high kinetic stability once formed. Remarkably, OmpA also forms significant amounts of higher order structures when refolding in the presence of lipid vesicles. We suggest that oligomerization occurs by domain swapping favored by the high local concentration of OmpA molecules congregating on the same micelle or vesicle. In this model, the unfolded oligomer is stabilized by a small number of intermolecular β-strand contacts and subsequently folds to a more stable state where these intermolecular contacts are consolidated in a native-like fashion by contacts between complementary β-strands from different molecules. Our model is supported by the ability of complementary fragments to associate with each other in vitro. Oligomerization is probably avoided in the cell by the presence of cellular chaperones which maintain the protein in a monomeric state.

Insights into the structure and assembly of Escherichia coli outer membrane protein A

Outer membrane protein A (OmpA) of Escherichia coli is a paradigm for the biogenesis of outer membrane proteins; however, the structure and assembly of OmpA have remained controversial. A review of studies to date supports the hypothesis that native OmpA is a single-domain large pore, while a two-domain narrow-pore structure is a folding intermediate or minor conformer. The in vitro refolding of OmpA to the large-pore conformation requires isolation of the protein from outer membranes with retention of an intact disulfide bond followed by sufficient incubation in lipids at temperatures of ≥ 26 °C to overcome the high energy of activation for refolding. The in vivo maturation of the protein involves covalent modification of serines in the eighth β-barrel of the N-terminal domain by oligo-(R)-3-hydroxybutyrates as the protein is escorted across the cytoplasm by SecB for post-translational secretion across the secretory translocase in the inner membrane. After cleavage of the signal sequence, protein chaperones, such as Skp, DegP and SurA, guide OmpA across the periplasm to the β-barrel assembly machinery (BAM) complex in the outer membrane. During this passage, a disulfide bond is formed between C290 and C302 by DsbA, and the hydrophobicity of segments of the C-terminal domain, which are destined for incorporation as β-barrels in the outer membrane bilayer, is increased by covalent attachment of oligo-(R)-3-hydroxybutyrates. With the aid of the BAM complex, OmpA is then assembled into the outer membrane as a single-domain large pore.

Membrane protein structure and dynamics from NMR spectroscopy

We review the current state of membrane protein structure determination using solid-state nuclear magnetic resonance (NMR) spectroscopy. Multidimensional magic-angle-spinning correlation NMR combined with oriented-sample experiments has made it possible to measure a full panel of structural constraints of membrane proteins directly in lipid bilayers. These constraints include torsion angles, interatomic distances, oligomeric structure, protein dynamics, ligand structure and dynamics, and protein orientation and depth of insertion in the lipid bilayer. Using solid-state NMR, researchers have studied potassium channels, proton channels, Ca(2+) pumps, G protein-coupled receptors, bacterial outer membrane proteins, and viral fusion proteins to elucidate their mechanisms of action. Many of these membrane proteins have also been investigated in detergent micelles using solution NMR. Comparison of the solid-state and solution NMR structures provides important insights into the effects of the solubilizing environment on membrane protein structure and dynamics.

Förster resonance energy transfer as a probe of membrane protein folding

The folding reaction of a β-barrel membrane protein, outer membrane protein A (OmpA), is probed with Förster resonance energy transfer (FRET) experiments. Four mutants of OmpA were generated in which the donor fluorophore, tryptophan, and acceptor molecule, a naphthalene derivative, are placed in various locations on the protein to report the evolution of distances across the bilayer and across the protein pore during a folding event. Analysis of the FRET efficiencies reveals three timescales for tertiary structure changes associated with insertion and folding into a synthetic bilayer. A narrow pore forms during the initial stage of insertion, followed by bilayer traversal. Finally, a long-time component is attributed to equilibration and relaxation, and may involve global changes such as pore expansion and strand extension. These results augment the existing models that describe concerted insertion and folding events, and highlight the ability of FRET to provide insight into the complex mechanisms of membrane protein folding. This article is part of a Special Issue entitled: Membrane protein structure and function.

Cross-linking measurements of in vivo protein complex topologies

Identification and measurement of in vivo protein interactions pose critical challenges in the goal to understand biological systems. The measurement of structures and topologies of proteins and protein complexes as they exist in cells is particularly challenging, yet critically important to improve understanding of biological function because proteins exert their intended function only through the structures and interactions they exhibit in vivo. In the present study, protein interactions in E. coli cells were identified in our unbiased cross-linking approach, yielding the first in vivo topological data on many interactions and the largest set of identified in vivo cross-linked peptides produced to date. These data show excellent agreement with protein and complex crystal structures where available. Furthermore, our unbiased data provide novel in vivo topological information that can impact understanding of biological function, even for cases where high resolution structures are not yet available.

Redesign of a plugged beta-barrel membrane protein

The redesign of biological nanopores is focused on bacterial outer membrane proteins and pore-forming toxins, because their robust β-barrel structure makes them the best choice for developing stochastic biosensing elements. Using membrane protein engineering and single-channel electrical recordings, we explored the ferric hydroxamate uptake component A (FhuA), a monomeric 22-stranded β-barrel protein from the outer membrane of Escherichia coli. FhuA has a luminal cross-section of 3.1 × 4.4 nm and is filled by a globular N-terminal cork domain. Various redesigned FhuA proteins were investigated, including single, double, and multiple deletions of the large extracellular loops and the cork domain. We identified four large extracellular loops that partially occlude the lumen when the cork domain is removed. The newly engineered protein, FhuAΔC/Δ4L, was the result of a removal of almost one-third of the total number of amino acids of the wild-type FhuA (WT-FhuA) protein. This extensive protein engineering encompassed the entire cork domain and four extracellular loops. Remarkably, FhuAΔC/Δ4L forms a functional open pore in planar lipid bilayers, with a measured unitary conductance of ∼4.8 nanosiemens, which is much greater than the values recorded previously with other engineered FhuA protein channels. There are numerous advantages and prospects of using such an engineered outer membrane protein not only in fundamental studies of membrane protein folding and design, and the mechanisms of ion conductance and gating, but also in more applicative areas of stochastic single-molecule sensing of proteins and nucleic acids.

Application of fragment-based drug discovery to membrane proteins: identification of ligands of the integral membrane enzyme DsbB

Membrane proteins are important pharmaceutical targets, but they pose significant challenges for fragment-based drug discovery approaches. Here, we present the first successful use of biophysical methods to screen for fragment ligands to an integral membrane protein. The Escherichia coli inner membrane protein DsbB was solubilized in detergent micelles and lipid bilayer nanodiscs. The solubilized protein was immobilized with retention of functionality and used to screen 1071 drug fragments for binding using target immobilized NMR Screening. Biochemical and biophysical validation of the eight most potent hits revealed an IC(50) range of 7-200 microM. The ability to insert a broad array of membrane proteins into nanodiscs, combined with the efficiency of TINS, demonstrates the feasibility of finding fragments targeting membrane proteins.

Factors affecting the folding of Pseudomonas aeruginosa OprF porin into the one-domain open conformer

Pseudomonas aeruginosa OprF is a largely monomeric outer membrane protein that allows the slow, nonspecific transmembrane diffusion of solutes. This protein folds into two different conformers, with the majority conformer folding into a two-domain conformation that has no porin activity and the minority conformer into a one-domain conformation with high porin activity and presumably consisting of a large β barrel. We examined the factors that control the divergent folding pathways of OprF. OprF contains four Cys residues in the linker region connecting the N-terminal β-barrel domain and the C-terminal globular domain in the majority conformer. Prevention of disulfide bond formation either by expression of OprF in an Escherichia coli dsbA strain grown with dithiothreitol or by replacement of all Cys residues with serine (CS OprF) increased the specific pore-forming activity of OprF significantly. Replacement of Phe160 with Ile at the end of the β-barrel termination signal as well as replacement of Lys164 in the linker region with Gly, Cys, or Glu increased porin activity 2-fold. Improving a potential β-barrel termination signal in the periplasmic domain by replacement of Asp211 with asparagine also increased porin activity. The porin activity could be improved about 5-fold by the combination of these replacements. OprF mutants with higher porin activity were shown to contain more one-domain conformers by surface labeling of the A312C residue in intact cells, as this residue is located in the periplasmic domain in the two-domain conformers. Finally, when the OprF protein was expressed in an E. coli strain lacking the periplasmic chaperone Skp, the CS OprF protein exhibited increased pore-forming activity.

High intrinsic levels of resistance to many antimicrobial agents, seen in Gram-negative bacterial species such as Pseudomonas aeruginosa and Acinetobacter species, are largely due to the extremely low permeability of their major porin OprF and OmpA. Because this low permeability is caused by the fact that these proteins mostly fold into a two-domain conformer without pores, knowledge as to what conditions increase the production of the pore-forming minority conformer may lead to dramatic improvements in the treatment of infections by these bacteria. We have found several factors that increase the proportion of the pore-forming conformer up to 5-fold. Although these studies were done with Escherichia coli, they may serve as the starting point for the design of strategies for improvement of antimicrobial therapy for these difficult-to-treat pathogens, some strains of which have now attained the “pan-resistant” status.

Oligo-(R)-3-hydroxybutyrate modification of sorting signal enables pore formation by Escherichia coli OmpA

The outer membrane protein A (OmpA) of Escherichia coli is a well-known model for protein targeting and protein folding. Wild-type OmpA, isolated either from cytoplasmic inclusion bodies or from outer membranes, forms narrow pores of approximately 80 pS in planar lipid bilayers at room temperature. The pores are well structured with narrow conductance range when OmpA is isolated using lithium dodecyl sulfate (LDS) or RapiGest surfactant but display irregular conductance when OmpA is isolated with urea or guanidine hydrochloride. Previous studies have shown that serine residues S163 and S167 of the sorting signal of OmpA (residues 163-169), i.e., the essential sequence for outer membrane incorporation, are covalently modified by oligomers of (R)-3-hydroxybutyrate (cOHB). Here we find that single-mutants S163 and S167 of OmpA, which still contain cOHB on one serine of the sorting signal, form narrow pores in planar lipid bilayers at room temperature with lower and more irregular conductance than wild-type OmpA, whereas double mutants S163:S167 and S163:V166 of OmpA, with no cOHB on the sorting signal, are unable to form stable pores in planar lipid bilayers. Our results indicate that modification of serines in the sorting signal of OmpA by cOHB in the cytoplasm enables OmpA to incorporate into lipid bilayers at room temperature as a narrow pore. They further suggest that cOHB modification may be an important factor in protein targeting and protein folding.