Membrane integration of the second transmembrane segment of band 3 requires a closely apposed preceding signal-anchor sequence

Effect of the Southeast Asian Ovalocytosis Deletion on the Conformational Dynamics of Signal-Anchor Transmembrane Segment 1 of Red Cell Anion Exchanger 1 (AE1, Band 3, or SLC4A1)

The first transmembrane (TM1) helix in the red cell anion exchanger (AE1, Band 3, or SLC4A1) acts as an internal signal anchor that binds the signal recognition particle and directs the nascent polypeptide chain to the endoplasmic reticulum (ER) membrane where it moves from the translocon laterally into the lipid bilayer. The sequence N-terminal to TM1 forms an amphipathic helix that lies at the membrane interface and is connected to TM1 by a bend at Pro403. Southeast Asian ovalocytosis (SAO) is a red cell abnormality caused by a nine-amino acid deletion (Ala400-Ala408) at the N-terminus of TM1. Here we demonstrate, by extensive (∼4.5 μs) molecular dynamics simulations of TM1 in a model 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine membrane, that the isolated TM1 peptide is highly dynamic and samples the structure of TM1 seen in the crystal structure of the membrane domain of AE1. The SAO deletion not only removes the proline-induced bend but also causes a "pulling in" of the part of the amphipathic helix into the hydrophobic phase of the bilayer, as well as the C-terminal of the peptide. The dynamics of the SAO peptide very infrequently resembles the structure of TM1 in AE1, demonstrating the disruptive effect the SAO deletion has on AE1 folding. These results provide a precise molecular view of the disposition and dynamics of wild-type and SAO TM1 in a lipid bilayer, an important early biosynthetic intermediate in the insertion of AE1 into the ER membrane, and extend earlier results of cell-free translation experiments.

Band 3, the human red cell chloride/bicarbonate anion exchanger (AE1, SLC4A1), in a structural context

The crystal structure of the dimeric membrane domain of human Band 3(1), the red cell chloride/bicarbonate anion exchanger 1 (AE1, SLC4A1), provides a structural context for over four decades of studies into this historic and important membrane glycoprotein. In this review, we highlight the key structural features responsible for anion binding and translocation and have integrated the following topological markers within the Band 3 structure: blood group antigens, N-glycosylation site, protease cleavage sites, inhibitor and chemical labeling sites, and the results of scanning cysteine and N-glycosylation mutagenesis. Locations of mutations linked to human disease, including those responsible for Southeast Asian ovalocytosis, hereditary stomatocytosis, hereditary spherocytosis, and distal renal tubular acidosis, provide molecular insights into their effect on Band 3 folding. Finally, molecular dynamics simulations of phosphatidylcholine self-assembled around Band 3 provide a view of this membrane protein within a lipid bilayer.

Viroporins, Examples of the Two-Stage Membrane Protein Folding Model

Viroporins are small, α-helical, hydrophobic virus encoded proteins, engineered to form homo-oligomeric hydrophilic pores in the host membrane. Viroporins participate in multiple steps of the viral life cycle, from entry to budding. As any other membrane protein, viroporins have to find the way to bury their hydrophobic regions into the lipid bilayer. Once within the membrane, the hydrophobic helices of viroporins interact with each other to form higher ordered structures required to correctly perform their porating activities. This two-step process resembles the two-stage model proposed for membrane protein folding by Engelman and Poppot. In this review we use the membrane protein folding model as a leading thread to analyze the mechanism and forces behind the membrane insertion and folding of viroporins. We start by describing the transmembrane segment architecture of viroporins, including the number and sequence characteristics of their membrane-spanning domains. Next, we connect the differences found among viroporin families to their viral genome organization, and finalize focusing on the pathways used by viroporins in their way to the membrane and on the transmembrane helix-helix interactions required to achieve proper folding and assembly.

Membrane protein integration into the endoplasmic reticulum

Most integral membrane proteins are targeted, inserted and assembled in the endoplasmic reticulum membrane. The sequential and potentially overlapping events necessary for membrane protein integration take place at sites termed translocons, which comprise a specific set of membrane proteins acting in concert with ribosomes and, probably, molecular chaperones to ensure the success of the whole process. In this minireview, we summarize our current understanding of helical membrane protein integration at the endoplasmic reticulum, and highlight specific characteristics that affect the biogenesis of multispanning membrane proteins.

Structure of the membrane domain of human erythrocyte anion exchanger 1 revealed by electron crystallography

The membrane domain of human erythrocyte anion exchanger 1 (AE1) works as a Cl(-)/HCO(3)(-) antiporter. This exchange is a key step for CO(2)/O(2) circulation in the blood. In spite of their importance, structural information about AE1 and the AE (anion exchanger) family are still very limited. We used electron microscopy to solve the three-dimensional structure of the AE1 membrane domain, fixed in an outward-open conformation by cross-linking, at 7.5-A resolution. A dimer of AE1 membrane domains packed in two-dimensional array showed a projection map similar to that of the prokaryotic homolog of the ClC chloride channel, a Cl(-)/H(+) antiporter. In a three-dimensional map, there are V-shaped densities near the center of the dimer and slightly narrower V-shaped clusters at a greater distance from the center of the dimer. These appear to be inserted into the membrane from opposite sides. The structural motifs, two homologous pairs of helices in internal repeats of the ClC transporter (helices B+C and J+K), are well fitted to those AE1 densities after simple domain movement.

Two translocating hydrophilic segments of a nascent chain span the ER membrane during multispanning protein topogenesis

During protein integration into the endoplasmic reticulum, the N-terminal domain preceding the type I signal-anchor sequence is translocated through a translocon. By fusing a streptavidin-binding peptide tag to the N terminus, we created integration intermediates of multispanning membrane proteins. In a cell-free system, N-terminal domain (N-domain) translocation was arrested by streptavidin and resumed by biotin. Even when N-domain translocation was arrested, the second hydrophobic segment mediated translocation of the downstream hydrophilic segment. In one of the defined intermediates, two hydrophilic segments and two hydrophobic segments formed a transmembrane disposition in a productive state. Both of the translocating hydrophilic segments were crosslinked with a translocon subunit, Sec61α. We conclude that two translocating hydrophilic segment in a single membrane protein can span the membrane during multispanning topogenesis flanking the translocon. Furthermore, even after six successive hydrophobic segments entered the translocon, N-domain translocation could be induced to restart from an arrested state. These observations indicate the remarkably flexible nature of the translocon.

Membrane integration and topology of the first transmembrane segment in normal and Southeast Asian ovalocytosis human erythrocyte anion exchanger 1

Anion exchanger 1 (AE1, or Band 3) is an integral membrane glycoprotein found in erythrocytes, responsible for the electroneutral exchange of chloride and bicarbonate ions across the plasma membrane. Southeast Asian ovalocytosis (SAO) results from a nine-amino acid deletion in the first transmembrane segment (TM) of the AE1 protein that abolishes its transport function. The effects of the SAO deletion on: (1) the efficiency of integration of TM1 into the membrane, and (2) the precise positioning of TM1 relative to the membrane were investigated using scanning N-glycosylation mutagenesis in a cell-free transcription/translation system and in transfected HEK293 cells. AE1 or SAO constructs containing either the endogenous N-glycosylation site at Asn642 in extracellular loop 4 (EC4) or single N-glycosylation sites engineered into an expanded extracellular loop 1 (EC1) were used. N-glycosylation efficiency of EC1 in the SAO construct was significantly lower than that of the AE1 construct, indicating that the SAO deletion impairs membrane integration of TM1 and the translocation of EC1 across the membrane. Scanning N-glycosylation mapping of EC1 in the cell-free system and in transfected cells showed that the C-terminus of both AE1 and SAO TM1 were at the same position relative to the membrane. Thus, the SAO deletion is likely to cause a pulling-in of the polar amino acid sequence immediately N-terminal to the deletion into the lipid bilayer, allowing SAO TM1 that was inserted to assume a transmembrane disposition.

Topology of transmembrane segments 1-4 in the human chloride/bicarbonate anion exchanger 1 (AE1) by scanning N-glycosylation mutagenesis

Human AE1 (anion exchanger 1), or Band 3, is an abundant membrane glycoprotein found in the plasma membrane of erythrocytes. The physiological role of the protein is to carry out chloride/bicarbonate exchange across the plasma membrane, a process that increases the carbon-dioxide-carrying capacity of blood. To study the topology of TMs (transmembrane segments) 1-4, a series of scanning N-glycosylation mutants were created spanning the region from EC (extracellular loop) 1 to EC2 in full-length AE1. These constructs were expressed in HEK-293 (human embryonic kidney) cells, and their N-glycosylation efficiencies were determined. Unexpectedly, positions within putative TMs 2 and 3 could be efficiently glycosylated. In contrast, the same positions were very poorly glycosylated when present in mutant AE1 with the SAO (Southeast Asian ovalocytosis) deletion (DeltaA400-A408) in TM1. These results suggest that the TM2-3 region of AE1 may become transiently exposed to the endoplasmic reticulum lumen during biosynthesis, and that there is a competition between proper folding of the region into the membrane and N-glycosylation at introduced sites. The SAO deletion disrupts the proper integration of TMs 1-2, probably leaving the region exposed to the cytosol. As a result, engineered N-glycosylation acceptor sites in TM2-3 could not be utilized by the oligosaccharyltransferase in this mutant form of AE1. The properties of TM2-3 suggest that these segments form a re-entrant loop in human AE1.

Topogenic Properties of Transmembrane Segments of Arabidopsis thaliana NHX1 Reveal a Common Topology Model of the Na+/H+ Exchanger Family

The membrane topology of the Arabidopsis thaliana Na(+)/H(+) exchanger isoform 1 (AtNHX1) was investigated by examining the topogenic function of transmembrane (TM) segments using a cell-free system. Even though the signal peptide found in the human Na(+)/H(+) exchanger (NHE) family is missing, the N-terminal hydrophobic segment was efficiently inserted into the membrane and had an N-terminus lumen topology depending on the next TM segment. The two N-terminal TM segments had the same topology as those of TM2 and TM3 of human NHE1. In contrast, TM2 and TM3 of human NHE1 did not acquire the correct topology when the signal peptide (denoted as TM1) was deleted. Furthermore, there were three hydrophobic segments with the same topogenic properties as the TM9-H10-TM10 segments of human NHE1, which has one lumenal loop (H10) and two flanking TM segments (TM9 and TM10). These data indicate that the plant NHX isoforms can form the common membrane topology proposed for the human NHE family, even though it does not have a signal peptide.

A dual function for SecA in the assembly of single spanning membrane proteins in Escherichia coli

The assembly of bacterial membrane proteins with large periplasmic loops is an intrinsically complex process because the SecY translocon has to coordinate the signal recognition particle-dependent targeting and integration of transmembrane domains with the SecA-dependent translocation of the periplasmic loop. The current model suggests that the ATP hydrolysis by SecA is required only if periplasmic loops larger than 30 amino acids have to be translocated. In agreement with this model, our data demonstrate that the signal recognition particle- and SecA-dependent multiple spanning membrane protein YidC becomes SecA-independent if the large periplasmic loop connecting transmembrane domains 1 and 2 is reduced to less than 30 amino acids. Strikingly, however, we were unable to render single spanning membrane proteins SecA-independent by reducing the length of their periplasmic loops. For these proteins, the complete assembly was always SecA-dependent even if the periplasmic loop was reduced to 13 amino acids. If, however, the 13-amino acid-long periplasmic loop was fused to a downstream transmembrane domain, SecA was no longer required for complete translocation. Although these data support the current model on the SecA dependence of multiple spanning membrane proteins, they indicate a novel function of SecA for the assembly of single spanning membrane proteins. This could suggest that single and multiple spanning membrane proteins are processed differently by the bacterial SecY translocon.

Translocation of a long amino-terminal domain through ER membrane by following signal-anchor sequence

Type I signal-anchor sequences mediate translocation of the N-terminal domain (N-domain) across the endoplasmic reticulum (ER) membrane. To examine the translocation in detail, dihydrofolate reductase (DHFR) was fused to the N-terminus of synaptotagmin II as a long N-domain. Translocation was arrested by the DHFR ligand methotrexate, which stabilizes the folding of the DHFR domain, and resumed after depletion of methotrexate. The targeting of the ribosome-nascent chain complex to the ER requires GTP, whereas N-domain translocation does not require any nucleotide triphosphates. Significant translocation was observed even in the absence of a lumenal hsp70 (BiP). When the nascent polypeptide was released from the ribosomes after the membrane targeting, the N-domain translocation was suppressed and the nascent chain was released from the translocon. Ribosomes have a crucial role in maintaining the translocation-intermediate state. The translocation of the DHFR domain was greatly impaired when it was separated from the signal-anchor sequence. Unfolding and translocation of the DHFR domain must be driven by the stroke of the signal-anchor sequence into translocon.

Biogenesis of CFTR and other polytopic membrane proteins: new roles for the ribosome-translocon complex

Polytopic protein biogenesis represents a critical, yet poorly understood area of modern biology with important implications for human disease. Inherited mutations in a growing array of membrane proteins frequently lead to improper folding and/or trafficking. The cystic fibrosis transmembrane conductance regulator (CFTR) is a primary example in which point mutations disrupt CFTR folding and lead to rapid degradation in the endoplasmic reticulum (ER). It has been difficult, however, to discern the mechanistic principles of such disorders, in part, because membrane protein folding takes place coincident with translation and within a highly specialized environment formed by the ribosome, Sec61 translocon, and the ER membrane. This ribosome-translocon complex (RTC) coordinates the synthesis, folding, orientation and integration of transmembrane segments across and into the ER membrane. At the same time, RTC function is controlled by specific sequence determinants within the nascent polypeptide. Recent studies of CFTR and other native membrane proteins have begun to define novel variations in translocation pathways and to elucidate the specific steps that establish complex topology. This article will attempt to reconcile advances in our understanding of protein biogenesis with emerging models of RTC function. In particular, it will emphasize how information within the nascent polypeptide is interpreted by and in turn controls RTC dynamics to generate the broad structural and functional diversity observed for naturally occurring membrane proteins.

Switching the sorting mode of membrane proteins from cotranslational endoplasmic reticulum targeting to posttranslational mitochondrial import

Hydrophobic membrane proteins are cotranslationally targeted to the endoplasmic reticulum (ER) membrane, mediated by hydrophobic signal sequence. Mitochondrial membrane proteins escape this mechanism despite their hydrophobic character. We examined sorting of membrane proteins into the mitochondria, by using mitochondrial ATP-binding cassette (ABC) transporter isoform (ABC-me). In the absence of 135-residue N-terminal hydrophilic segment (N135), the membrane domain was integrated into the ER membrane in COS7 cells. Other sequences that were sufficient to import soluble protein into mitochondria could not import the membrane domain. N135 imports other membrane proteins into mitochondria. N135 prevents cotranslational targeting of the membrane domain to ER and in turn achieves posttranslational import into mitochondria. In a cell-free system, N135 suppresses targeting to the ER membranes, although it does not affect recognition of hydrophobic segments by signal recognition particle. We conclude that the N135 segment blocks the ER targeting of membrane proteins even in the absence of mitochondria and switches the sorting mode from cotranslational ER integration to posttranslational mitochondrial import.

Topogenesis of NHE1: direct insertion of the membrane loop and sequestration of cryptic glycosylation and processing sites just after TM9

Multispanning membrane proteins are synthesized by membrane-bound ribosomes and integrated into the endoplasmic reticulum membrane cotranslationally. To uncover the topogenic process of membrane loop, of which both ends are in the same side of the membrane, we examined topogenesis of a relatively hydrophobic lumenal loop segment (H10 segment) between TM9 and TM10 of human Na(+)/H(+) exchanger isoform 1 using an in vitro expression system. The H10 segment was translocated through the membrane. Any potential sites created within the H10 segment were not glycosylated. Just after TM9, there are potential glycosylation and signal peptidase processing sites. When the reporter domain of prolactin was fused at the position preceding the H10 segment, these sites were modified by the enzymes, while they were not modified in the original molecule. Thus, we concluded that the H10 segment was translocated through the membrane and directly inserted into the membrane and that its membrane insertion caused sequestration of the preceding processing and glycosylation sites from the lumenal modifying enzymes. This topogenic process shows clear contrast to that of pore loops of K(+) channels, which are once exposed in the lumen and accessible to glycosylation enzyme.

Transmembrane topology of sphingoid long-chain base-1-phosphate phosphatase, Lcb3p

BACKGROUND

Sphingoid long-chain base-1-phosphates (LCBPs) are thought to act as intracellular signalling molecules in yeast. Lcb3p is a member of the LCBPs-specific phosphatase family (SPP family). Other yeast phosphatases, Lpp1p and Dpp1p, are members of a different lipid phosphatase family (LPP family) known to exhibit broader substrate specificities. Until now, only the membrane topology of mammalian LPP family members has been reported, whereas that of the SPP family has remained unclear.

RESULTS

In our in vitro system, Lcb3p displayed major phosphatase activity against dihydrosphingosine-1-phosphate, while Dpp1p and Lpp1p also exhibited activities. Here, we determined that Lpp1p and Dpp1p exhibit the topology common to the LPP family. Moreover, we examined the transmembrane topology of Lcb3p using a C-terminal reporter approach. From our results we deduced a structural model illustrating that Lcb3p has eight membrane-spanning domains with its highly conserved phosphatase motifs positioned within the endoplasmic reticulum (ER) lumen. Consistent with this result, Lcb3p collected in low speed pellet fractions was highly resistant to exogenous proteinase K unless the membrane was disrupted.

CONCLUSION

Our results suggest that the active site of Lcb3p is located in the ER lumen and, thus, the phosphate group of the LCBP is hydrolysed on the lumenal side.

Topology of the membrane-associated hepatitis C virus protein NS4B

Hepatitis C virus (HCV) belongs to the Hepacivirus genus in the Flaviviridae family. Among the least known viral proteins in this family is the nonstructural protein NS4B, which has been suggested to be a part of the replication complex. Hydrophobicity plots indicate a common profile among the NS4B proteins from different members of the Flaviviridae family, suggesting a common function. In order to gain a deeper understanding of the nature of HCV NS4B, we have determined localization and topology of this protein by using recombinant HCV NS4B constructs. The protein localized to the endoplasmic reticulum (ER), but also induced a pattern of cytoplasmic foci positive for markers of the ER. Computer predictions of the membrane topology of NS4B suggested that it has four transmembrane segments. The N and C termini were anticipated to be localized in the cytoplasm, because they are processed by the cytoplasmic NS3 protein. By introducing glycosylation sites at various positions in HCV NS4B, we show that the C terminus is cytoplasmic and the loop around residue 161 is lumenal as predicted. Surprisingly, the N-terminal tail was translocated into the lumen in a considerable fraction of the NS4B molecules, most likely by a posttranslational process. Interestingly, NS4B proteins of the yellow fever and dengue viruses also have their N termini located in the ER lumen due to an N-terminal signal peptide not found in NS4B of HCV. A shared topology achieved in two different ways supports the notion of a common function for NS4B in FLAVIVIRIDAE:

Molecular dissection of the contribution of negatively and positively charged residues in S2, S3, and S4 to the final membrane topology of the voltage sensor in the K+ channel, KAT1

Voltage-dependent ion channels control changes in ion permeability in response to membrane potential changes. The voltage sensor in channel proteins consists of the highly positively charged segment, S4, and the negatively charged segments, S2 and S3. The process involved in the integration of the protein into the membrane remains to be elucidated. In this study, we used in vitro translation and translocation experiments to evaluate interactions between residues in the voltage sensor of a hyperpolarization-activated potassium channel, KAT1, and their effect on the final topology in the endoplasmic reticulum (ER) membrane. A D95V mutation in S2 showed less S3-S4 integration into the membrane, whereas a D105V mutation allowed S4 to be released into the ER lumen. These results indicate that Asp(95) assists in the membrane insertion of S3-S4 and that Asp(105) helps in preventing S4 from being releasing into the ER lumen. The charge reversal mutation, R171D, in S4 rescued the D105R mutation and prevented S4 release into the ER lumen. A series of constructs containing different C-terminal truncations of S4 showed that Arg(174) was required for correct integration of S3 and S4 into the membrane. Interactions between Asp(105) and Arg(171) and between negative residues in S2 or S3 and Arg(174) may be formed transiently during membrane integration. These data clarify the role of charged residues in S2, S3, and S4 and identify posttranslational electrostatic interactions between charged residues that are required to achieve the correct voltage sensor topology in the ER membrane.

Integral membrane protein biosynthesis: why topology is hard to predict

Integral membrane protein biogenesis requires the coordination of several events: accurate targeting of the nascent chain to the membrane; recognition,orientation and integration of transmembrane (TM) domains; and proper formation of tertiary and quaternary structure. Initially unanticipated inter-and intra-protein interactions probably mediate each stage of biogenesis for single spanning, polytopic and C-terminally anchored membrane proteins. The importance of these regulated interactions is illustrated by analysis of topology prediction algorithm failures. Misassigned or misoriented TM domains occur because the primary sequence and overall hydrophobicity of a single TM domain are not the only determinants of membrane integration.

Integration of Shaker-type K+ channel, KAT1, into the endoplasmic reticulum membrane: synergistic insertion of voltage-sensing segments, S3-S4, and independent insertion of pore-forming segments, S5-P-S6

KAT1 is a member of the Shaker family of voltage-dependent K(+) channels, which has six transmembrane segments (called S1-S6), including an amphipathic S4 with several positively charged residues and a hydrophobic pore-forming region (called P) between S5 and S6. In this study, we systematically evaluated the function of individual and combined transmembrane segments of KAT1 to direct the final topology in the endoplasmic reticulum membrane by in vitro translation and translocation experiments. The assay with single-transmembrane constructs showed that S1 possesses the type II signal-anchor function, whereas S2 has the stop-transfer function. The properties fit well with the results derived from combined insertion of S1 and S2. S3 and S4 failed to integrate into the membrane by themselves. The inserted glycosylation sequence at the S3-S4 loop neither prevented the translocation of S3 and S4 nor impaired the function of voltage-dependent K(+) transport regardless of the changed length of the S3-S4 loop. S3 and S4 are likely to be posttranslationally integrated into the membrane only when somewhat specific interaction occurs between them. S5 had the ability of translocation reinitiation, and S6 had a strong preference for N(exo)/C(cyt) orientation. The pore region resided outside because of its lack of its transmembrane-spanning property. According to their own topogenic function, combined constructs of S5-P-S6 conferred the membrane-pore-membrane topology. This finding supports the notion that a set of S5-P-S6 can be independently integrated into the membrane. The results in this study provide the fundamental topogenesis mechanism of transmembrane segments involving voltage sensor and pore region in KAT1.