Sequence requirements for protein-primed initiation and elongation of phage O29 DNA replication

Methanosarcina Spherical Virus, a Novel Archaeal Lytic Virus Targeting Methanosarcina Strains

A novel archaeal lytic virus targeting species of the genus Methanosarcina was isolated using Methanosarcina mazei strain Gö1 as the host. Due to its spherical morphology, the virus was designated Methanosarcina spherical virus (MetSV). Molecular analysis demonstrated that MetSV contains double-stranded linear DNA with a genome size of 10,567 bp containing 22 open reading frames (ORFs), all oriented in the same direction. Functions were predicted for some of these ORFs, i.e., such as DNA polymerase, ATPase, and DNA-binding protein as well as envelope (structural) protein. MetSV-derived spacers in CRISPR loci were detected in several published Methanosarcina draft genomes using bioinformatic tools, revealing a potential protospacer-adjacent motif (PAM) motif (TTA/T). Transcription and expression of several predicted viral ORFs were validated by reverse transcription-PCR (RT-PCR), PAGE analysis, and liquid chromatography-mass spectrometry (LC-MS)-based proteomics. Analysis of core lipids by atmospheric pressure chemical ionization (APCI) mass spectrometry showed that MetSV and Methanosarcina mazei both contain archaeol and glycerol dialkyl glycerol tetraether without a cyclopentane moiety (GDGT-0). The MetSV host range is limited to Methanosarcina strains growing as single cells (M. mazei, Methanosarcina barkeri and Methanosarcina soligelidi). In contrast, strains growing as sarcina-like aggregates were apparently protected from infection. Heterogeneity related to morphology phases in M. mazei cultures allowed acquisition of resistance to MetSV after challenge by growing cultures as sarcina-like aggregates. CRISPR/Cas-mediated resistance was excluded since neither of the two CRISPR arrays showed MetSV-derived spacer acquisition. Based on these findings, we propose that changing the morphology from single cells to sarcina-like aggregates upon rearrangement of the envelope structure prevents infection and subsequent lysis by MetSV.IMPORTANCE Methanoarchaea are among the most abundant organisms on the planet since they are present in high numbers in major anaerobic environments. They convert various carbon sources, e.g., acetate, methylamines, or methanol, to methane and carbon dioxide; thus, they have a significant impact on the emission of major greenhouse gases. Today, very little is known about viruses specifically infecting methanoarchaea that most probably impact the abundance of methanoarchaea in microbial consortia. Here, we characterize the first identified Methanosarcina-infecting virus (MetSV) and show a mechanism for acquiring resistance against MetSV. Based on our results, we propose that growth as sarcina-like aggregates prevents infection and subsequent lysis. These findings allow new insights into the virus-host relationship in methanogenic community structures, their dynamics, and their phase heterogeneity. Moreover, the availability of a specific virus provides new possibilities to deepen our knowledge of the defense mechanisms of potential hosts and offers tools for genetic manipulation.

DNA-Binding Proteins Essential for Protein-Primed Bacteriophage Φ29 DNA Replication

Bacillus subtilis phage Φ29 has a linear, double-stranded DNA 19 kb long with an inverted terminal repeat of 6 nucleotides and a protein covalently linked to the 5′ ends of the DNA. This protein, called terminal protein (TP), is the primer for the initiation of replication, a reaction catalyzed by the viral DNA polymerase at the two DNA ends. The DNA polymerase further elongates the nascent DNA chain in a processive manner, coupling strand displacement with elongation. The viral protein p5 is a single-stranded DNA binding protein (SSB) that binds to the single strands generated by strand displacement during the elongation process. Viral protein p6 is a double-stranded DNA binding protein (DBP) that preferentially binds to the origins of replication at the Φ29 DNA ends and is required for the initiation of replication. Both SSB and DBP are essential for Φ29 DNA amplification. This review focuses on the role of these phage DNA-binding proteins in Φ29 DNA replication both in vitro and in vivo, as well as on the implication of several B. subtilis DNA-binding proteins in different processes of the viral cycle. We will revise the enzymatic activities of the Φ29 DNA polymerase: TP-deoxynucleotidylation, processive DNA polymerization coupled to strand displacement, 3′–5′ exonucleolysis and pyrophosphorolysis. The resolution of the Φ29 DNA polymerase structure has shed light on the translocation mechanism and the determinants responsible for processivity and strand displacement. These two properties have made Φ29 DNA polymerase one of the main enzymes used in the current DNA amplification technologies. The determination of the structure of Φ29 TP revealed the existence of three domains: the priming domain, where the primer residue Ser232, as well as Phe230, involved in the determination of the initiating nucleotide, are located, the intermediate domain, involved in DNA polymerase binding, and the N-terminal domain, responsible for DNA binding and localization of the TP at the bacterial nucleoid, where viral DNA replication takes place. The biochemical properties of the Φ29 DBP and SSB and their function in the initiation and elongation of Φ29 DNA replication, respectively, will be described.

Protein-Primed Replication of Bacteriophage Φ29 DNA

The requirement of DNA polymerases for a 3'-hydroxyl (3'-OH) group to prime DNA synthesis raised the question about how the ends of linear chromosomes could be replicated. Among the strategies that have evolved to handle the end replication problem, a group of linear phages and eukaryotic and archaeal viruses, among others, make use of a protein (terminal protein, TP) that primes DNA synthesis from the end of their genomes. The replicative DNA polymerase recognizes the OH group of a specific residue in the TP to initiate replication that is guided by an internal 3' nucleotide of the template strand. By a sliding-back mechanism or variants of it the terminal nucleotide(s) is(are) recovered and the TP becomes covalently attached to the genome ends. Bacillus subtilis phage ϕ29 is the organism in which such a mechanism has been studied more extensively, having allowed to lay the foundations of the so-called protein-primed replication mechanism. Here we focus on the main biochemical and structural features of the two main proteins responsible for the protein-primed initiation step: the DNA polymerase and the TP. Thus, we will discuss the structural determinants of the DNA polymerase responsible for its ability to use sequentially a TP and a DNA as primers, as well as for its inherent capacity to couple high processive synthesis to strand displacement. On the other hand, we will review how TP primes initiation followed by a transition step for further DNA-primed replication by the same polymerase molecule. Finally, we will review how replication is compartmentalized in vivo.

Insights into the Determination of the Templating Nucleotide at the Initiation of φ29 DNA Replication

Bacteriophage φ29 from Bacillus subtilis starts replication of its terminal protein (TP)-DNA by a protein-priming mechanism. To start replication, the DNA polymerase forms a heterodimer with a free TP that recognizes the replication origins, placed at both 5' ends of the linear chromosome, and initiates replication using as primer the OH-group of Ser-232 of the TP. The initiation of φ29 TP-DNA replication mainly occurs opposite the second nucleotide at the 3' end of the template. Earlier analyses of the template position that directs the initiation reaction were performed using single-stranded and double-stranded oligonucleotides containing the replication origin sequence without the parental TP. Here, we show that the parental TP has no influence in the determination of the nucleotide used as template in the initiation reaction. Previous studies showed that the priming domain of the primer TP determines the template position used for initiation. The results obtained here using mutant TPs at the priming loop where Ser-232 is located indicate that the aromatic residue Phe-230 is one of the determinants that allows the positioning of the penultimate nucleotide at the polymerization active site to direct insertion of the initiator dAMP during the initiation reaction. The role of Phe-230 in limiting the internalization of the template strand in the polymerization active site is discussed.

Improved artificial origins for phage Φ29 terminal protein-primed replication. Insights into early replication events

The replication machinery of bacteriophage Φ29 is a paradigm for protein-primed replication and it holds great potential for applied purposes. To better understand the early replication events and to find improved origins for DNA amplification based on the Φ29 system, we have studied the end-structure of a double-stranded DNA replication origin. We have observed that the strength of the origin is determined by a combination of factors. The strongest origin (30-fold respect to wt) has the sequence CCC at the 3' end of the template strand, AAA at the 5' end of the non-template strand and 6 nucleotides as optimal unpairing at the end of the origin. We also show that the presence of a correctly positioned displaced strand is important because origins with 5' or 3' ssDNA regions have very low activity. Most of the effect of the improved origins takes place at the passage between the terminal protein-primed and the DNA-primed modes of replication by the DNA polymerase suggesting the existence of a thermodynamic barrier at that point. We suggest that the template and non-template strands of the origin and the TP/DNA polymerase complex form series of interactions that control the critical start of terminal protein-primed replication.

The essential role of the 3' terminal template base in the first steps of protein-primed DNA replication

Bacteriophages φ29 and Nf from Bacillus subtilis start replication of their linear genomes at both ends using a protein-primed mechanism by means of which the DNA polymerase initiates replication by adding dAMP to the terminal protein, this insertion being directed by the second and third 3′ terminal thymine of the template strand, respectively. In this work, we have obtained evidences about the role of the 3′ terminal base during the initiation steps of φ29 and Nf genome replication. The results indicate that the absence of the 3′ terminal base modifies the initiation position carried out by φ29 DNA polymerase in such a way that now the third position of the template, instead of the second one, guides the incorporation of the initiating nucleotide. In the case of Nf, although the lack of the 3′ terminal base has no effect on the initiation position, its absence impairs further elongation of the TP-dAMP initiation product. The results show the essential role of the 3′ terminal base in guaranteeing the correct positioning of replication origins at the polymerization active site to allow accurate initiation of replication and further elongation.

Phage phi29 and Nf terminal protein-priming domain specifies the internal template nucleotide to initiate DNA replication

Bacteriophages phi29 and Nf from Bacillus subtilis start replication of their linear genome at both DNA ends by a protein-primed mechanism, by which the DNA polymerase, in a template-instructed reaction, adds 5'-dAMP to a molecule of terminal protein (TP) to form the initiation product TP-dAMP. Mutational analysis of the 3 terminal thymines of the Nf DNA end indicated that initiation of Nf DNA replication is directed by the third thymine on the template, the recovery of the 2 terminal nucleotides mainly occurring by a stepwise sliding-back mechanism. By using chimerical TPs, constructed by swapping the priming domain of the related phi29 and Nf proteins, we show that this domain is the main structural determinant that dictates the internal 3' nucleotide used as template during initiation.

Functional characterization of highly processive protein-primed DNA polymerases from phages Nf and GA-1, endowed with a potent strand displacement capacity

This paper shows that the protein-primed DNA polymerases encoded by bacteriophages Nf and GA-1, unlike other DNA polymerases, do not require unwinding or processivity factors for efficient synthesis of full-length terminal protein (TP)-DNA. Analysis of their polymerization activity shows that both DNA polymerases base their replication efficiency on a high processivity and on the capacity to couple polymerization to strand displacement. Both enzymes are endowed with a proofreading activity that acts coordinately with the polymerization one to edit polymerization errors. Additionally, Nf double-stranded DNA binding protein (DBP) greatly stimulated the in vitro formation of the TP-dAMP initiation complex by decreasing the K_m value for dATP of the Nf DNA polymerase by >20-fold. Whereas Nf DNA polymerase, as the φ29 enzyme, is able to use its homologous TP as well as DNA as primer, GA-1 DNA polymerase appears to have evolved to use its corresponding TP as the only primer of DNA synthesis. Such exceptional behaviour is discussed in the light of the recently solved structure of the DNA polymerase/TP complex of the related bacteriophage φ29.

The phi29 DNA polymerase:protein-primer structure suggests a model for the initiation to elongation transition

The absolute requirement for primers in the initiation of DNA synthesis poses a problem for replicating the ends of linear chromosomes. The DNA polymerase of bacteriophage phi29 solves this problem by using a serine hydroxyl of terminal protein to prime replication. The 3.0 A resolution structure shows one domain of terminal protein making no interactions, a second binding the polymerase and a third domain containing the priming serine occupying the same binding cleft in the polymerase as duplex DNA does during elongation. Thus, the progressively elongating DNA duplex product must displace this priming domain. Further, this heterodimer of polymerase and terminal protein cannot accommodate upstream template DNA, thereby explaining its specificity for initiating DNA synthesis only at the ends of the bacteriophage genome. We propose a model for the transition from the initiation to the elongation phases in which the priming domain of terminal protein moves out of the active site as polymerase elongates the primer strand. The model indicates that terminal protein should dissociate from polymerase after the incorporation of approximately six nucleotides.

Binding of phage Phi29 architectural protein p6 to the viral genome: evidence for topological restriction of the phage linear DNA

Bacillus subtilis phage Phi29 protein p6 is required for DNA replication and promotes the switch from early to late transcription. In vivo it binds all along the viral linear DNA, which suggests a global role as an architectural protein; in contrast, binding to bacterial DNA is negligible. This specificity could be due to the p6 binding preference for less negatively supercoiled DNA, as is presumably the case with viral (with respect to bacterial) DNA. Here we demonstrate that p6 binding to Phi29 DNA is greatly increased when negative supercoiling is decreased by novobiocin; in addition, gyrase is required for DNA replication. This indicates that, although non-covalently closed, the viral genome is topologically constrained in vivo. We also show that the p6 binding to different Phi29 DNA regions is modulated by the structural properties of their nucleotide sequences. The higher affinity for DNA ends is possibly related to the presence of sequences in which their bendability properties favor the formation of the p6-DNA complex, whereas the lower affinity for the transcription control region is most probably due to the presence of a rigid intrinsic DNA curvature.

Genome wide, supercoiling-dependent in vivo binding of a viral protein involved in DNA replication and transcriptional control

Protein p6 of Bacillus subtilis bacteriophage Phi29 is essential for phage development. In vitro it activates the initiation of DNA replication and is involved in the early to late transcriptional switch. These activities require the formation of a nucleoprotein complex in which the DNA forms a right-handed superhelix wrapping around a multimeric protein core. However, there was no evidence of p6 binding to Phi29 DNA in vivo. By crosslinking, chromatin immunoprecipitation and real-time PCR we show that protein p6 binds to most, if not all, the viral genome in vivo, although with higher affinity for both DNA ends, which contain the replication origins. In contrast, the affinity for plasmid DNA is negligible, but greatly increases when the negative supercoiling decreases, as shown in vivo by treatment of cells with novobiocin and in vitro by fluorescence quenching with plasmids with different topology. In conclusion, binding of protein p6 all along the Phi29 genome strongly suggests that its functions in replication and transcription control could be local outcomes of a more global role as a histone-like protein. The p6 binding dependence on DNA topology could explain its preferential binding to viral with respect to bacterial DNA, whose level of negative supercoiling is presumably higher than that of Phi29 DNA.

A "slide-back" mechanism for the initiation of protein-primed RNA synthesis by the RNA polymerase of poliovirus

Poliovirus RNA replication is initiated when a molecule of UMP is covalently linked to the hydroxyl group of a tyrosine in the terminal protein VPg. This reaction can be reproduced in vitro with an assay that utilizes two purified viral proteins, RNA polymerase 3Dpol and viral protein 3CDpro, synthetic VPg, UTP, and Mg2+. The template for the reaction is either poliovirus RNA or transcripts of a small RNA hairpin, termed cre(2C), located in the coding sequence of protein 2CATPase. The products of the reaction are VPgpU and VPgpUpU, the primers used by 3Dpol for RNA synthesis. With mutant template RNAs in this assay we determined the precise initiation site. Our results indicate that 1) 3Dpol does not possess strict specificity toward the nucleotide it links to VPg, 2) A-5 of the conserved 1GXXXAAAXXXXXXA14 sequence in the loop is the template nucleotide for the linkage of both the first and second UMPs to VPg, 3) VPgpUpU is synthesized by a "slide-back" mechanism, and 4) A-6 provides specificity to the reaction during the slide-back step and also modulates the uridylylation reaction. In additional experiments we determined the effect of mutations in the 5AAA7 sequence of cre(2C) on viral growth, RNA replication, and on the activity of the 2CATPase protein. Furthermore, we observed that the spacing between G-1 and A-5 and the size of the loop affect the yield but not the nature of the VPg-linked products.

A conserved insertion in protein-primed DNA polymerases is involved in primer terminus stabilisation

Protein-primed DNA polymerases form a subgroup of the eukaryotic-type DNA polymerases family, also called family B or alpha-like. A multiple amino acid sequence alignment of this subgroup of DNA polymerases led to the identification of two insertions, TPR-1 and TPR-2, in the polymerisation domain. We showed previously that Asp332 of the TPR-1 insertion of phi29 DNA polymerase is involved in the correct orientation of the terminal protein (TP) for the initiation of replication. In this work, the functional role of two other conserved residues from TPR-1, Lys305 and Tyr315, has been analysed. The four mutant derivatives constructed, K305I, K305R, Y315A and Y315F, displayed a wild-type 3'-5' exonuclease activity on single-stranded DNA. However, when assayed on double-stranded DNA such activity was higher than that of the wild-type enzyme. This activity led to a reduced pol/exo ratio, suggesting a defect in stabilising the primer terminus at the polymerase active site. On the other hand, although mutant polymerases K305I and Y315A were able to couple processive DNA polymerisation to strand displacement, they were severely impaired in phi29 TP-DNA replication. The possible role of the TPR-1 insertion in the set of interactions with the nascent chain during the first steps of TP-DNA replication is discussed.

phi29 DNA polymerase residue Phe128 of the highly conserved (S/T)Lx(2)h motif is required for a stable and functional interaction with the terminal protein

Bacteriophage phi29 encodes a DNA-dependent DNA polymerase belonging to the eukaryotic-type (family B) subgroup of DNA polymerases that use a protein as primer for initiation of DNA replication. By multiple sequence alignments of DNA polymerases from such a family, we have been able to identify two amino acid residues specifically conserved in the protein-priming subgroup of DNA polymerases, a phenylalanine contained in the (S/T)Lx(2)h motif, and a glutamate belonging to the Exo III motif. Here, we have studied the functional role of these residues in reactions that are specific for DNA polymerases that use a protein-primed DNA replication mechanism, by site-directed mutagenesis in the corresponding amino acid residues, Phe128 and Glu161 of phi29 DNA polymerase. Mutations introduced at residue Phe128 severely impaired the protein-primed replication capacity of the polymerase, being the interaction with the terminal protein (TP) moderately (mutant F128A) or severely (mutant F128Y) diminished. As a consequence, very few initiation products were obtained, and essentially no transition products were detected. Interestingly, phi29 DNA polymerase mutant F128Y showed a decreased binding affinity for short template DNA molecules. These results, together with the high degree of conservation of Phe128 residue among protein-primed DNA polymerases, suggest a functional role for this amino acid residue in making contacts with the TP during the first steps of genome replication and with DNA in the further replication steps.