Involvement of the cytoplasmic loop L6-7 in the entry mechanism for transport of Ca2+ through the sarcoplasmic reticulum Ca2+-ATPase

Deciphering the Mechanism of Inhibition of SERCA1a by Sarcolipin Using Molecular Simulations

SERCA1a is an ATPase calcium pump that transports Ca²⁺ from the cytoplasm to the sarco/endoplasmic reticulum lumen. Sarcolipin (SLN), a transmembrane peptide, regulates the activity of SERCA1a by decreasing its Ca²⁺ transport rate, but its mechanism of action is still not well-understood. To decipher this mechanism, we have performed normal mode analysis in the all-atom model, with the SERCA1a-SLN complex, or the isolated SERCA1a, embedded in an explicit membrane. The comparison of the results allowed us to provide an explanation at the atomic level for the action of SLN that is in good agreement with experimental observations. In our analyses, the presence of SLN locally perturbs the TM6 transmembrane helix and as a consequence modifies the position of D800, one of the key metal-chelating residues. Additionally, it reduces the flexibility of the gating residues, V304, and E309 in TM4, at the entrance of the Ca²⁺ binding sites, which would decrease the affinity for Ca²⁺. Unexpectedly, SLN has also an effect on the ATP binding site more than 35 Å away, due to the straightening of TM5, a long helix considered as the spine of the protein. The straightening of TM5 modifies the structure of the P-N linker that sits above it, and which comprises the ³⁵¹DKTG³⁵⁴ conserved motif, resulting in an increase of the distance between ATP and the phosphorylation site. As a consequence, the turn-over rate could be affected. All this gives SERCA1a the propensity to go toward a Ca²⁺ low-affinity E2-like state in the presence of SLN and toward a Ca²⁺ high-affinity E1-like state in the absence of SLN. In addition to a general mechanism of inhibition of SERCA1a regulatory peptides, this study also provides an insight into the conformational transition between the E2 and E1 states.

The SERCA residue Glu340 mediates interdomain communication that guides Ca2+ transport

We present a crystal structure, functional data, and molecular dynamics (MD) simulations of the sarco(endo)plasmic reticulum Ca²⁺-ATPase (SERCA) mutant E340A. The mutation slows Ca²⁺-binding kinetics, and the structural differences between wild type and E340A indicate that the mutation disrupts a central interdomain “communication hub” governing Ca²⁺ binding/dissociation. MD simulations reveal altered dynamics in regions mediating Ca²⁺ occlusion, a critical step in SERCA’s alternating access mechanism. The mutation stabilizes a more occluded state of the Ca²⁺ sites. The strict conservation of Glu340 among P-type ATPases is the result of its critical role in interdomain communication between the cytosolic headpiece and the transmembrane domain, ensuring a delicate balance between dynamics of ion binding, occlusion, and release—key steps in the transport process.

The sarco(endo)plasmic reticulum Ca²⁺-ATPase (SERCA) is a P-type ATPase that transports Ca²⁺ from the cytosol into the sarco(endo)plasmic reticulum (SR/ER) lumen, driven by ATP. This primary transport activity depends on tight coupling between movements of the transmembrane helices forming the two Ca²⁺-binding sites and the cytosolic headpiece mediating ATP hydrolysis. We have addressed the molecular basis for this intramolecular communication by analyzing the structure and functional properties of the SERCA mutant E340A. The mutated Glu340 residue is strictly conserved among the P-type ATPase family of membrane transporters and is located at a seemingly strategic position at the interface between the phosphorylation domain and the cytosolic ends of 5 of SERCA’s 10 transmembrane helices. The mutant displays a marked slowing of the Ca²⁺-binding kinetics, and its crystal structure in the presence of Ca²⁺ and ATP analog reveals a rotated headpiece, altered connectivity between the cytosolic domains, and an altered hydrogen bonding pattern around residue 340. Supported by molecular dynamics simulations, we conclude that the E340A mutation causes a stabilization of the Ca²⁺ sites in a more occluded state, hence displaying slowed dynamics. This finding underpins a crucial role of Glu340 in interdomain communication between the headpiece and the Ca²⁺-binding transmembrane region.

Ion pathways in the sarcoplasmic reticulum Ca2+-ATPase

The sarco/endoplasmic reticulum Ca(2+)-ATPase (SERCA) is a transmembrane ion transporter belonging to the P(II)-type ATPase family. It performs the vital task of re-sequestering cytoplasmic Ca(2+) to the sarco/endoplasmic reticulum store, thereby also terminating Ca(2+)-induced signaling such as in muscle contraction. This minireview focuses on the transport pathways of Ca(2+) and H(+) ions across the lipid bilayer through SERCA. The ion-binding sites of SERCA are accessible from either the cytoplasm or the sarco/endoplasmic reticulum lumen, and the Ca(2+) entry and exit channels are both formed mainly by rearrangements of four N-terminal transmembrane α-helices. Recent improvements in the resolution of the crystal structures of rabbit SERCA1a have revealed a hydrated pathway in the C-terminal transmembrane region leading from the ion-binding sites to the cytosol. A comparison of different SERCA conformations reveals that this C-terminal pathway is exclusive to Ca(2+)-free E2 states, suggesting that it may play a functional role in proton release from the ion-binding sites. This is in agreement with molecular dynamics simulations and mutational studies and is in striking analogy to a similar pathway recently described for the related sodium pump. We therefore suggest a model for the ion exchange mechanism in P(II)-ATPases including not one, but two cytoplasmic pathways working in concert.

In and out of the cation pumps: P-type ATPase structure revisited

Active transport across membranes is a crucial requirement for life. P-type ATPases build up electrochemical gradients at the expense of ATP by forming and splitting a covalent phosphoenzyme intermediate, coupled to conformational changes in the transmembrane section where the ions are translocated. The marked increment during the last three years in the number of crystal structures of P-type ATPases has greatly improved our understanding of the similarities and differences of pumps with different ion specificities, since the structures of the Ca2+-ATPase, the Na+,K+-ATPase and the H+-ATPase can now be compared directly. Mechanisms for ion gating, charge neutralization and backflow prevention are starting to emerge from comparative structural analysis; and in combination with functional studies of mutated pumps this provides a framework for speculating on how the ions are bound and released as well as on how specificity is achieved.

Changes in electrostatic surface potential of Na+/K+-ATPase cytoplasmic headpiece induced by cytoplasmic ligand(s) binding

A set of single-tryptophan mutants of the Na(+)/K(+)-ATPase isolated, large cytoplasmic loop connecting transmembrane helices M4 and M5 (C45) was prepared to monitor effects of the natural cytoplasmic ligands (i.e., Mg(2+) and/or ATP) binding. We introduced a novel method for the monitoring of the changes in the electrostatic surface potential (ESP) induced by ligand binding, using the quenching of the intrinsic tryptophan fluorescence by acrylamide or iodide. This approach opens a new way to understanding the interactions within the proteins. Our experiments revealed that the C45 conformation in the presence of the ATP (without magnesium) substantially differed from the conformation in the presence of Mg(2+) or MgATP or in the absence of any ligand not only in the sense of geometry but also in the sense of the ESP. Notably, the set of ESP-sensitive residues was different from the set of geometry-sensitive residues. Moreover, our data indicate that the effect of the ligand binding is not restricted only to the close environment of the binding site and that the information is in fact transmitted also to the distal parts of the molecule. This property could be important for the communication between the cytoplasmic headpiece and the cation binding sites located within the transmembrane domain.

Molecular dynamics simulation exploration of cooperative migration mechanism of calcium ions in sarcoplasmic reticulum Ca2+-ATPase

Calcium ATPase is a member of the P-type ATPase, and it pumps calcium ions from the cytoplasm into the reticulum against a concentration gradient. Several X-ray structures of different conformations have been solved in recent years, providing basis for elucidating the active transport mechanism of Ca2+ ions. In this work, molecular dynamics (MD) simulations were performed at atomic level to investigate the dynamical process of calcium ions moving from the outer mouth of the protein to their binding sites. Five initial locations of Ca2+ ions were considered, and the simulations lasted for 2 or 6 ns, respectively. Specific pathways leading to the binding sites and large structural rearrangements around binding sites caused by uptake of calcium ions were identified. A cooperative binding mechanism was observed from our simulation. Firstly, the first Ca2+ ion binds to site I, and then, the second Ca2+ ion approaches. The interactions between the second Ca2+ and the residues around site I disturb the binding state of site I and weaken its binding ability for the first bound Ca2+. Because of the electrostatic repulsion of the second Ca2+ and the electrostatic attraction of site II, the first bound Ca2+ shifts from site I to site II. Concertedly, the second Ca2+ binds to site I, forming a binding state with two Ca2+ ions, one at site I and the other at site II. Both of Glu908 and Asp800 coordinate with the two Ca2+ ions simultaneously during the concerted binding process, which is believed to be the hinge to achieve the concerted binding. In our simulations, four amino acid residues that serve as the channel to link the outer mouth and the binding sites during the binding process were recognized, namely Tyr837, Tyr763, Asn911, and Ser767. The analyses regarding the activity of the proteins via mutations of some key residues also supported our cooperative mechanism.

Role of the charged amino acid residues in the cytoplasmic loop between putative transmembrane segments 6 and 7 of Na+-ATPase of an alkaliphilic bacterium, Exiguobacterium aurantiacum

ATPase activity of the membrane-bound Na(+)-ATPase of an alkaliphilic bacterium, Exiguobacterium aurantiacum, was measured in various concentrations of NaCl. Hill plot analysis showed a Hill number of 1.7 with 5.2 mM as the K(0.5) value for Na(+). When the site-directed mutagenesis of seven charged amino acid residues in the cytoplasmic loop (L6/7) between putative transmembrane segments 6 and 7 of the enzyme was conducted, all the mutated enzymes exhibited Hill numbers close to that of the wild-type enzyme (WT). When reconstituted with lecithin, all the mutants exhibited Na(+)-transport activity. While alanine substitution for several residues gave some significant effects on the enzyme function, the most remarkable effect was observed in the substitution for Glu-733. The K(0.5) value of E733A for Na(+) was 83.2 mM. The mutant exhibited only 8.5% of the ATPase activity and 54.0% of the energy-coupling efficiency for Na(+) transport as compared with those of WT, respectively. Drastic decreases of apparent affinity for Na(+) and energy efficiency of ion transport were also observed in E733K and E733T, respectively.

Kinetics of Ca2+ binding to the SR Ca-ATPase in the E1 state

The time-resolved kinetics of Ca2+ binding to the SR Ca-ATPase in the E1 state was investigated by Ca(2+)-concentration jump experiments. Ca2+ was released by an ultraviolet-light flash from caged calcium, and charge movements in the membrane domain of the ion pumps were detected by the fluorescent styryl dye 2BITC. The partial reaction (H3E1 <-->) E1 <--> CaE1 <--> Ca2E1 can be characterized by two time constants, tau1 and tau2, both of which are not significantly Ca(2+)-concentration-dependent and only weakly pH-dependent at pH < 7.5. Both time constants differ by a factor of approximately 50 (4.7 vs. 200 ms). The weak substrate-dependence indicates that the rate-limiting process is not related to Ca2+ migration through the access channel and ion binding to the binding sites but to conformational rearrangements preceding the ion movements. The high activation energy obtained for both processes, 42.3 kJ mol(-1) and 60.3 kJ mol(-1) at pH 7.2, support this concept. Transient binding of Ca ions to the loop L67 and a movement of the Ca-loaded loop are discussed as a mechanism that facilitates the entrance of both Ca ions into the access channel to the ion-binding sites.

Functional consequences of alterations to Thr247, Pro248, Glu340, Asp813, Arg819, and Arg822 at the interfaces between domain P, M3, and L6-7 of sarcoplasmic reticulum Ca2+-ATPase. Roles in Ca2+ interaction and phosphoenzyme processing

Point mutants with alterations to amino acid residues Thr(247), Pro(248), Glu(340), Asp(813), Arg(819), and Arg(822) of sarcoplasmic reticulum Ca(2+)-ATPase were analyzed by transient kinetic measurements. In the Ca(2+)-ATPase crystal structures, most of these residues participate in a hydrogen-bonding network between the phosphorylation domain (domain P), the third transmembrane helix (M3), and the cytoplasmic loop connecting the sixth and the seventh transmembrane helices (L6-7). In several of the mutants, a pronounced phosphorylation "overshoot" was observed upon reaction of the Ca(2+)-bound enzyme with ATP, because of accumulation of dephosphoenzyme at steady state. Mutations of Glu(340) and its partners, Thr(247) and Arg(822), in the bonding network markedly slowed the Ca(2+) binding transition (E2 --> E1 --> Ca(2)E1) as well as Ca(2+) dissociation from Ca(2+) site II back toward the cytosol but did not affect the apparent affinity for vanadate. These mutations may have caused a slowing, in both directions, of the conformational change associated directly with Ca(2+) interaction at Ca(2+) site II. Because mutation of Asp(813) inhibited the Ca(2+) binding transition, but not Ca(2+) dissociation, and increased the apparent affinity for vanadate, the effect on the Ca(2+) binding transition seems in this case to be exerted by slowing the E2 --> E1 conformational change. Because the rate was not significantly enhanced by a 10-fold increase of the Ca(2+) concentration, the slowing is not the consequence of reduced affinity of any pre-binding site for Ca(2+). Furthermore, the mutations interfered in specific ways with the phosphoenzyme processing steps of the transport cycle; the transition from ADP-sensitive phosphoenzyme to ADP-insensitive phosphoenzyme (Ca(2)E1P --> E2P) was accelerated by mutations perturbing the interactions mediated by Glu(340) and Asp(813) and inhibited by mutation of Pro(248), and mutations of Thr(247) induced charge-specific changes of the rate of dephosphorylation of E2P.

Modulation of sarcoplasmic reticulum Ca(2+)-ATPase by chronic and acute exposure to peroxynitrite

The Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum (SERCA), an integral membrane protein, becomes irreversibly inactivated in vitro by the addition of a single bolus of peroxynitrite with a K(0.5) of 200-300 microm, and this results in a large decrease of the ATP-dependent Ca2+ gradient across the sarcoplasmic reticulum (SR) membranes. The inactivation of SERCA is raised by treatment of SR vesicles with repetitive micromolar pulses of peroxynitrite. The inhibition of the SERCA is due to the oxidation of thiol groups and tyrosine nitration. Scavengers that react directly with peroxynitrite, such as cysteine, reduced glutathione, NADH, methionine, ascorbate or Trolox, a water-soluble analog of alpha-tocopherol, afforded significant protection. However, dimethyl sulfoxide and mannitol, two hydroxyl radical scavengers, and alpha-tocopherol did not protect SERCA from inactivation. Our results showed that the target of peroxynitrite is the cytosolic globular domain of the SERCA and that major skeletal muscle intracellular reductants (ascorbate, NADH and reduced glutathione) protected against inhibition of this ATPase by peroxynitrite.

The role of loop 6/7 in folding and functional performance of Na,K-ATPase

Alanine substitutions were made for 15 amino acids in the cytoplasmic loop between transmembrane helices 6 and 7 (L6/7) of the human alpha(1)-subunit of Na,K-ATPase. Most mutations reduced Na,K-ATPase activity by less than 50%; however, the mutations R834A, R837A, and R848A reduced Na,K-ATPase activity by 75, 89, and 66%, respectively. Steady-state phosphoenzyme formation from ATP was reduced in mutants R834A, R837A, and R848A, and R837A also had a faster E(2)P --> E(2) dephosphorylation rate compared with the wild-type enzyme. Effects of L6/7 mutations on the phosphorylation domain of the protein were also demonstrated by (18)O exchange, which showed that intrinsic rate constants for P(i) binding and/or reaction with the protein were altered. Although most L6/7 mutations had no effect on the interaction of Na(+) or K(+) with Na,K-ATPase, the E825A, E828A, R834A, and R837A mutations reduced the apparent affinity of the enzyme for both Na(+) and K(+) by 1.5-3-fold. 1-Bromo-2,4,6-tris(methylisothiouronium)benzene (Br-TITU(3+)), a competitive antagonist of Rb(+) and Na(+) occlusion, was used to test whether charged residues in L6/7 are involved in binding monovalent cations and cation antagonists. Br-TITU(3+) inhibited ouabain binding to wild type Na,K-ATPase with an IC(50) of 30 microM. Ouabain binding to the E825A, E828A, R834A, or R837A mutants was still inhibited by Br-TITU(3+), indicating that Br-TITU(3+) does not bind to charged residues in L6/7. This observation makes it unlikely that L6/7 functions as a cytoplasmic cation binding site in Na,K-ATPase, and together with the effects of L6/7 mutations on phosphate interactions with the enzyme suggests that L6/7 is important in stabilizing the phosphorylation domain and its relationship to the ion binding sites of the protein.

Involvement of the L6-7 loop in SERCA1a Ca2+-ATPase activation by Ca2+ (or Sr2+) and ATP

Wild-type (WT) and the double mutant D813A,D818A (ADA) of the L6-7 loop of SERCA1a were expressed in yeast, purified, and reconstituted into lipids. This allowed us to functionally study these ATPases by both kinetic and spectroscopic means, and to solve previous discrepancies in the published literature about both experimental facts and interpretation concerning the role of this loop in P-type ATPases. We show that in a solubilized state, the ADA mutant experiences a dramatic decrease of its calcium-dependent ATPase activity. On the contrary, reconstituted in a lipid environment, it displays an almost unaltered maximal calcium-dependent ATPase activity at high (millimolar) ATP, with an apparent affinity for Ca(2+) altered only moderately (3-fold). In the absence of ATP, the true affinity of ADA for Ca(2+) is, however, more significantly reduced (20-30-fold) compared with WT, as judged from intrinsic (Trp) or extrinsic (fluorescence isothiocyanate) fluorescence experiments. At low ATP, transient kinetics experiments reveal an overshoot in the ADA phosphorylation level primarily arising from the slowing down of the transition between the nonphosphorylated "E2" and "Ca(2)E1" forms of ADA. At high ATP, this slowing down is only partially compensated for, as ADA turnover remains more sensitive to orthovanadate than WT turnover. ADA ATPase also proved to have a reduced affinity for ATP in studies performed under equilibrium conditions in the absence of Ca(2+), highlighting the long range interactions between L6-7 and the nucleotide-binding site. We propose that these mutations in L6-7 could affect protonation-dependent winding and unwinding events in the nearby M6 transmembrane segment.

Importance of Transmembrane Segment M1 of the Sarcoplasmic Reticulum Ca2+-ATPase in Ca2+ Occlusion and Phosphoenzyme Processing

The functional consequences of a series of point mutations in transmembrane segment M1 of sarcoplasmic reticulum Ca2+-ATPase were analyzed in steady-state and transient kinetic experiments examining the partial reaction steps involved in Ca2+ interaction and phosphoenzyme turnover. Arginine or leucine substitution of Glu51, Glu55, or Glu58, located in the N-terminal third of M1, did not affect these functions. Arginine or leucine substitution of Asp59, located right at the bend of M1 seen in the crystal structure of the thapsigargin-bound form, caused a 10-fold increase of the rate of Ca2+ dissociation toward the cytoplasmic side. Mutation of Leu60 to alanine or proline and of Val62 to alanine also enhanced Ca2+ dissociation, whereas an 11-fold reduction of the rate of Ca2+ dissociation was observed upon alanine substitution of Leu65, thus providing evidence for a relation of the middle part of M1 to a gating mechanism controlling the dissociation of occluded Ca2+ from its membranous binding sites. Moreover, phosphoenzyme processing was affected by some of the latter mutations, in particular leucine substitution of Asp59, and alanine substitution of Leu65 accelerated the transition to ADP-insensitive phosphoenzyme and blocked its dephosphorylation, thus demonstrating that this part of M1, besides being important in Ca2+ interaction, furthermore, is a critical element in the long range signaling between the transmembrane domain and the cytoplasmic catalytic site.

Evidence for tryptophan residues in the cation transport path of the Na(+),K(+)-ATPase

A family of aryl isothiouronium derivatives was designed as probes for cation binding sites of Na(+),K(+)-ATPase. Previous work showed that 1-bromo-2,4,6-tris(methylisothiouronium)benzene (Br-TITU) acts as a competitive blocker of Na(+) or K(+) occlusion. In addition to a high-affinity cytoplasmic site (K(D) < 1 microM), a low-affinity site (K(D) approximately 10 microM) was detected, presumably extracellular. Here we describe properties of Br-TITU as a blocker at the extracellular surface. In human red blood cells Br-TITU inhibits ouabain-sensitive Na(+) transport (K(D) approximately 30 microM) in a manner antagonistic with respect to extracellular Na(+). In addition, Br-TITU impairs K(+)-stimulated dephosphorylation and Rb(+) occlusion from phosphorylated enzyme of renal Na(+),K(+)-ATPase, consistent with binding to an extracellular site. Incubation of renal Na(+),K(+)-ATPase with Br-TITU at pH 9 irreversibly inactivates Na(+),K(+)-ATPase activity and Rb(+) occlusion. Rb(+) or Na(+) ions protect. Preincubation of Br-TITU with red cells in a K(+)-free medium at pH 9 irreversibly inactivates ouabain-sensitive (22)Na(+) efflux, showing that inactivation occurs at an extracellular site. K(+), Cs(+), and Li(+) ions protect against this effect, but the apparent affinity for K(+), Cs(+), or Li(+) is similar (K(D) approximately 5 mM) despite their different affinities for external activation of the Na(+) pump. Br-TITU quenches tryptophan fluorescence of renal Na(+),K(+)-ATPase or of digested "19 kDa membranes". After incubation at pH 9 irreversible loss of tryptophan fluorescence is observed and Rb(+) or Na(+) ions protect. The Br-TITU appears to interact strongly with tryptophan residue(s) within the lipid or at the extracellular membrane-water interface and interfere with cation occlusion and Na(+),K(+)-ATPase activity.

Structure and mechanism of Na,K-ATPase: functional sites and their interactions

The cell membrane Na,K-ATPase is a member of the P-type family of active cation transport proteins. Recently the molecular structure of the related sarcoplasmic reticulum Ca-ATPase in an E1 conformation has been determined at 2.6 A resolution. Furthermore, theoretical models of the Ca-ATPase in E2 conformations are available. As a result of these developments, these structural data have allowed construction of homology models that address the central questions of mechanism of active cation transport by all P-type cation pumps. This review relates recent evidence on functional sites of Na,K-ATPase for the substrate (ATP), the essential cofactor (Mg(2+) ions), and the transported cations (Na(+) and K(+)) to the molecular structure. The essential elements of the Ca-ATPase structure, including 10 transmembrane helices and well-defined N, P, and A cytoplasmic domains, are common to all PII-type pumps such as Na,K-ATPase and H,K-ATPases. However, for Na,K-ATPase and H,K-ATPase, which consist of both alpha- and beta-subunits, there may be some detailed differences in regions of subunit interactions. Mutagenesis, proteolytic cleavage, and transition metal-catalyzed oxidative cleavages are providing much evidence about residues involved in binding of Na(+), K(+), ATP, and Mg(2+) ions and changes accompanying E1-E2 or E1-P-E2-P conformational transitions. We discuss this evidence in relation to N, P, and A cytoplasmic domain interactions, and long-range interactions between the active site and the Na(+) and K(+) sites in the transmembrane segments, for the different steps of the catalytic cycle.

NMR studies of the fifth transmembrane segment of sarcoplasmic reticulum Ca2+-ATPase reveals a hinge close to the Ca2+-ligating residues

Two recent X-ray structures have tremendously increased the understanding of the sarco/endoplasmic reticulum Ca(2+)-ATPase (SERCA) and related proteins. Both structures show the fifth transmembrane span (M5) as a single continuous alpha-helix. The inherent structural and dynamic features of this span (Lys758-Glu785) were studied in isolation in sodium dodecyl sulfate (SDS) micelles using liquid-state nuclear magnetic resonance (NMR) spectroscopy. We find that a flexible region (Ile765-Asn768) is interrupting the alpha-helix. The location of the flexible region near the Ca(2+) binding residues Asn768 and Glu771 suggests that together with a similar region in M6 it has a hinge function that may be important for cooperative Ca(2+) binding and occlusion.

Mutagenesis of residues involved in control of the Ca2+ entry pathway and conformational changes associated with Ca2+ binding in the SR Ca2+-ATPase

Rapid kinetic measurements were used to study the rate of Ca(2+) dissociation from the high-affinity Ca(2+) sites of the dephosphoenzyme (i.e., from the E(1)Ca(2) form toward the cytoplasmic side) as well as the rate of Ca(2+) binding with associated conformational changes (E(2) --> E(1)Ca(2) transition) in the wild type and mutants of the sarcoplasmic reticulum Ca(2+)-ATPase expressed in mammalian cells. Cluster mutations as well as single mutations in transmembrane segment M3 resulted in conspicuous effects on the rate of Ca(2+) migration. Furthermore, mutation of Asp(59) in transmembrane segment M1 to arginine exerted a profound effect on Ca(2+) interaction. The data demonstrate an important role for M3 residues in control of the Ca(2+) entry pathway and provide functional evidence in support of a close relationship between this pathway and the water-accessible channel leading between transmembrane segments M1 and M3 in the thapsigargin stabilized E(2) structure. In addition, rapid kinetic measurements demonstrated that the hydrogen bond network involving Asp(813) of loop L6-7 and Lys(758) of M5 is important for the E(2) --> E(1)Ca(2) transition.

Involvement of the cytoplasmic loop L6-7 in the entry mechanism for transport of Ca2+ through the sarcoplasmic reticulum Ca2+-ATPase

We have found that despite a markedly low calcium affinity the D813A/D818A mutant is capable, after complexation with Cr.ATP, of occluding Ca(2+) to the same extent (1-2 Ca(2+) per ATPase monomer) as wild- type ATPase. The inherent ability of the synthetic L6-7 loop peptide to bind Ca(2+) was demonstrated with murexide and mass spectrometry. NMR analysis indicated the formation of specific 1:1 cation complexes of the peptide with calcium and lanthanum with coordination by all three aspartate residues D813/D815/D818 that resulted in an altered conformation of the peptide chain. Overall our observations suggest that, in addition to mediating contact between the intramembranous Ca(2+) binding sites and the cytosolic phosphorylation site as previously suggested, the L6-7 loop, in a preceding step, participates in the formation of an entrance port important for lodging Ca(2+) at a high-affinity binding site inside the membrane.

Roles of Leu249, Lys252, and Leu253 in membrane segment M3 of sarcoplasmic reticulum Ca2+-ATPase in control of Ca2+ migration and long-range intramolecular communication

Point mutants with alterations to Leu249, Lys252, Leu253, Asp254, and Glu255 in membrane segment M3, and Pro824, Lys825, and Glu826 in loop L6-7, of the sarcoplasmic reticulum Ca2+-ATPase were analyzed functionally by steady-state and transient kinetic methods. In mutants Leu249Ala, Lys252Glu, and Leu253Ala, the rate of Ca2+ dissociation from the cytoplasmically facing high-affinity Ca2+ sites was increased 4- to 7-fold relative to wild type, and in Leu249Ala and Lys252Glu the rate of Ca2+ binding was increased as well. Substitution of Lys252 with arginine, alanine, glutamine, or methionine affected Ca2+ interaction much less, indicating that the negative charge of the glutamate is particularly disturbing. These findings may be understood on the basis of the hypothesis that a water-accessible channel leading between membrane segments M1 and M3 in the thapsigargin-bound Ca2+-free structure [Toyoshima, C., and Nomura, H. (2002) Nature 418, 605-611] is closely related to the migration pathway for Ca2+. The effects of alanine mutations to Leu249 and Leu253 on Ca2+ dissociation may arise from destabilization of the hydrophobic wall lining the pathway. In mutant Lys252Glu, unfavorable interaction between the glutamate and L6-7 may open the pathway. In addition, Leu253Ala, and to a lesser extent some of the other mutations, reduced the rate of the E1PCa2 to E2P transition of the phosphoenzyme, enhanced the rate of dephosphorylation of E2P, and reduced the apparent affinity for vanadate, suggesting interference with the conformational change of the phosphoenzyme and the function of the catalytic site in E2 and E2P.

A calcium pump made visible

The first high-resolution structure of a P-type ATPase, that of the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum, was published in 2000. This structure has provided many clues to how the Ca(2+)-ATPase might work, but no complete answers. The Ca(2+)-ATPase structure reveals no clear pathway from the cytoplasmic side of the membrane to the pair of high-affinity binding sites for Ca(2+) located in the transmembrane region of the ATPase and no clear pathway from these sites to the lumenal side of the membrane. The ATPase is therefore very unlike an ion channel in its construction. It is unclear from the crystal structure of the Ca(2+)-ATPase exactly how the protein sits within the lipid bilayer that surrounds it in the membrane. The Ca(2+)-ATPase is implicated in thermogenesis in some types of muscle; this could involve processes of slippage and leak modulated by interaction between the Ca(2+)-ATPase and sarcolipin.