Probing the folded state of fibronectin type III domains in stretched fibrils by measuring buried cysteine accessibility

Strain-dependent glutathionylation of fibronectin fibers impacts mechano-chemical behavior and primes an integrin switch

The extracellular matrix (ECM) is a protein polymer network that physically supports cells within a tissue. It acts as an important physical and biochemical stimulus directing cell behaviors. For fibronectin (Fn), a predominant component of the ECM, these physical and biochemical activities are inextricably linked as physical forces trigger conformational changes that impact its biochemical activity. Here, we analyze whether oxidative post-translational modifications, specifically glutathionylation, alter Fn's mechano-chemical characteristics through stretch-dependent protein modification. ECM post-translational modifications represent a potential for time- or stimulus-dependent changes in ECM structure-function relationships that could persist over time with potentially significant impacts on cell and tissue behaviors. In this study, we show evidence that glutathionylation of Fn ECM fibers is stretch-dependent and alters Fn fiber mechanical properties with implications on the selectivity of engaging integrin receptors. These data demonstrate the existence of multimodal post-translational modification mechanisms within the ECM with high relevance to the microenvironmental regulation of downstream cell behaviors.

Nucleation of fibronectin fibril assembly requires binding between heparin and the 13th type III module of fibronectin

Fibronectin (FN), a critical component of the extracellular matrix, is assembled into fibrils through a cell-mediated process. Heparan sulfate (HS) binds to the III13 module of FN, and fibroblasts lacking this glycosaminoglycan exhibit reduced FN fibril assembly. To determine if HS depends on III13 to control FN assembly, we deleted both III13 alleles in NIH 3T3 cells using the CRISPR-Cas9 system. ΔIII13 cells assembled fewer FN matrix fibrils and less DOC-insoluble FN matrix than wildtype cells. Little if any mutant FN matrix was assembled when purified ΔIII13 FN was provided to Chinese hamster ovary (CHO) cells, showing that lack of III13 caused the deficiency in assembly by ΔIII13 cells. Addition of heparin promoted the assembly of wildtype FN by CHO cells, but it had no effect on the assembly of ΔIII13 FN. Furthermore, heparin binding stabilized the folded conformation of III13 and prevented it from self-associating with increasing temperature suggesting that stabilization by HS/heparin binding might regulate interactions between III13 and other FN modules. This effect would be particularly important at matrix assembly sites where our data show that ΔIII13 cells require both exogenous wildtype FN and heparin in the culture medium to maximize assembly site formation. Our results show that heparin-promoted growth of fibril nucleation sites is dependent on III13. We conclude that HS/heparin binds to III13 to promote and control the nucleation and development of FN fibrils.

Fibronectin: Molecular Structure, Fibrillar Structure and Mechanochemical Signaling

The extracellular matrix (ECM) plays a key role as both structural scaffold and regulator of cell signal transduction in tissues. In times of ECM assembly and turnover, cells upregulate assembly of the ECM protein, fibronectin (FN). FN is assembled by cells into viscoelastic fibrils that can bind upward of 40 distinct growth factors and cytokines. These fibrils play a key role in assembling a provisional ECM during embryonic development and wound healing. Fibril assembly is also often upregulated during disease states, including cancer and fibrotic diseases. FN fibrils have unique mechanical properties, which allow them to alter mechanotransduction signals sensed and relayed by cells. Binding of soluble growth factors to FN fibrils alters signal transduction from these proteins, while binding of other ECM proteins, including collagens, elastins, and proteoglycans, to FN fibrils facilitates the maturation and tissue specificity of the ECM. In this review, we will discuss the assembly of FN fibrils from individual FN molecules; the composition, structure, and mechanics of FN fibrils; the interaction of FN fibrils with other ECM proteins and growth factors; the role of FN in transmitting mechanobiology signaling events; and approaches for studying the mechanics of FN fibrils.

On Force and Form: Mechano-Biochemical Regulation of Extracellular Matrix

The extracellular matrix is well-known for its structural role in supporting cells and tissues, and its important biochemical role in providing signals to cells has increasingly become apparent. These structural and biochemical roles are closely coupled through mechanical forces: the biochemistry of the extracellular matrix determines its mechanical properties, mechanical forces control release or display of biochemical signals from the extracellular matrix, and the mechanical properties of the matrix in turn influence the mechanical set point at which signals are sent. In this Perspective, we explain how the extracellular matrix is regulated by strain and mechanical forces. We show the impact of biochemistry and mechanical forces on in vivo assembly of extracellular matrix and illustrate how matrix can be generated in vitro using a variety of methods. We cover how the matrix can be characterized in terms of mechanics, composition, and conformation to determine its properties and to predict interactions. Finally, we explore how extracellular matrix remodeling, ligand binding, and hemostasis are regulated by mechanical forces. These recently discovered mechano-biochemical interactions have important functions in wound healing and disease progression. It is likely that mechanically altered extracellular matrix interactions are a commonly recurring theme, but due to limited tools to generate extracellular matrix fibers in vitro and lack of high-throughput methods to detect these interactions, it is hypothesized that many of these interactions have yet to be discovered.

Fibronectin fiber creep under constant force loading

Viscoelasticity is a fundamental property of virtually all biological materials, and proteinaceous, fibrous materials that constitute the extracellular matrix (ECM) are no exception. Viscoelasticity may be particularly important in the ECM since cells can apply mechanical stress resulting from cell contractility over very long periods of time. However, measurements of ECM fiber response to long-term constant force loading are scarce, despite the increasing recognition that mechanical strain regulates the biological function of some ECM fibers. We developed a dual micropipette system that applies constant force to single fibers for up to 8 h. We utilized this system to study the time dependent response of fibronectin (Fn) fibers to constant force, as Fn fibers exhibit tremendous extensibility before mechanical failure as well as strain dependent alterations in biological properties. These data demonstrate the Fn fibers continue to stretch under constant force loading for at least 8 h and that this long-term creep results in plastic deformation of Fn fibers, in contrast to elastic deformation of Fn fibers under short-term, but fast loading rate extension. These data demonstrate that physiologically-relevant loading may impart mechanical features to Fn fibers by switching them into an extended state that may have altered biological functions. STATEMENT OF SIGNIFICANCE: Measurements of extracellular matrix (ECM) fiber response to constant force loading are scarce, so we developed a novel technique for applying constant force to single ECM fibers. We used this technique to measure constant force creep of fibronectin fibers since these fibers have been shown to be mechanotransducers whose functions can be altered by mechanical strain. We found that fibronectin fibers creep under constant force loading for the duration of the experiment and that this creep behavior resembles a power law. Furthermore, we found that constant force creep results in plastic deformation of the fibers, which suggests that the mechanobiological switching of fibronectin can only occur once after long-term loading.

Metastatic prostate cancer cells are highly sensitive to 3-bromopyruvic acid

AIMS

3-Bromopyruvate (3-BP), an alkylating agent and a glycolytic inhibitor, is a promising anticancer agent, which can be efficient also against multidrug-resistant cancer cells. The aim of this study was to examine how 3-BP affects the survival and mobility of rat (MAT-LyLu and AT-2) and human (DU-145 and PC-3) metastatic prostate cancer cell lines.

MAIN METHODS

Cytotoxicity was estimated with Neutral Red. Cell mobility was analyzed by time-lapse microscopic monitoring of trajectories of individual cells at 5-min intervals for 6h. ATP was estimated with luciferin/luciferase and glutathione (GSH) with o-phthalaldehyde. Actin cytoskeleton was visualized with phalloidin conjugated with Atto-488.

KEY FINDINGS

All metastatic prostate cell lines studied were very sensitive to 3-BP (IC₅₀ of 4-26μM). 3-Bromopyruvate drastically reduced cell movement even at concentrations of 5-10μM after 1h treatment. This compound depleted also cellular ATP and GSH, and disrupted actin cytoskeleton.

SIGNIFICANCE

The data obtained suggest that 3-BP can potentially be useful for treatment of metastatic prostate cancer and, especially, be efficient in limiting metastasis.

Rationally designed synthetic protein hydrogels with predictable mechanical properties

Designing synthetic protein hydrogels with tailored mechanical properties similar to naturally occurring tissues is an eternal pursuit in tissue engineering and stem cell and cancer research. However, it remains challenging to correlate the mechanical properties of protein hydrogels with the nanomechanics of individual building blocks. Here we use single-molecule force spectroscopy, protein engineering and theoretical modeling to prove that the mechanical properties of protein hydrogels are predictable based on the mechanical hierarchy of the cross-linkers and the load-bearing modules at the molecular level. These findings provide a framework for rationally designing protein hydrogels with independently tunable elasticity, extensibility, toughness and self-healing. Using this principle, we demonstrate the engineering of self-healable muscle-mimicking hydrogels that can significantly dissipate energy through protein unfolding. We expect that this principle can be generalized for the construction of protein hydrogels with customized mechanical properties for biomedical applications.

Multiple Cryptic Binding Sites are Necessary for Robust Fibronectin Assembly: An In Silico Study

The mechanism of assembly of the extracellular matrix protein fibronectin (FN) into elastic, insoluble fibrils is still poorly understood. FN fibrillogenesis requires cell-generated forces, which expose cryptic FN-FN binding sites buried in FN Type III domains. The number and location of cryptic binding sites have been debated, but experimental evidence suggests multiple domains may contain FN-FN binding sites. The requirement of cell-dependent forces to generate FN fibrils restricts investigation of the mechanism of assembly. To address this, we use a recently developed biophysical model of fibrillogenesis to test competing hypotheses for the location and number of cryptic FN-FN binding sites and quantify the effect of these molecular alterations on assembled FN fibril properties. Simulations predict that a single FN-FN binding site facilitates either negligible fibrillogenesis or produces FN fibrils that are neither robust nor physiological. However, inclusion of multiple FN-FN binding sites predicts robust fibrillogenesis, which minimally depends on individual domain properties. Multiple FN-FN binding site models predict a heterogeneous fibril population that contains two distinct phenotypes with unique viscoelastic properties, which we speculate may play a key role in generating heterogeneous mechanical signaling in the extracellular matrix of developing and regenerating tissues.

Fibronectin Conformation and Assembly: Analysis of Fibronectin Deletion Mutants and Fibronectin Glomerulopathy (GFND) Mutants

To study fibronectin (FN) conformation and assembly, we generated several deletion mutants: FNΔI1-5, FNΔIII1-3, FNΔIII4-8, and FNΔIII11-14. A monomeric form, FNmono, which lacked the C-terminal dimerization region, was also created. FNtnA-D was generated by swapping FNIII domains 1-8 in FNΔIII11-14 with seven FNIII domains from tenascin-C. The conformations of these mutants were analyzed by glycerol gradient sedimentation under low-salt (20 mM NaCl) and high-salt (200 mM NaCl) conditions. Surprisingly, most of the mutants showed a compact conformation under low-salt conditions, except for FNtnA-D. When we tested these mutants in cell culture, FNΔI1-5, FNΔIII1-3, and FNtnA-D were unable to form a matrix. Interestingly, FNΔIII1-3 and FNtnA-D were capable of co-assembly with full-length FN, while FNΔI1-5 was not. This indicates that the segment I1-5 is crucial for matrix assembly and segment III1-3 is also important. Mutations in FN are associated with glomerulopathy, but when we studied mutant proteins, the single-nucleotide mutations had only minor effects on conformation and matrix assembly. The mutations may destabilize their FNIII domains or generate dimers of dimers by disulfide cross-linking.

Mechanotransduction Dynamics at the Cell-Matrix Interface

The ability of cells to sense and respond to mechanical cues from the surrounding environment has been implicated as a key regulator of cell differentiation, migration, and proliferation. The extracellular matrix (ECM) is an oft-overlooked component of the interface between cells and their surroundings. Cells assemble soluble ECM proteins into insoluble fibrils with unique mechanical properties that can alter the mechanical cues a cell receives. In this study, we construct a model that predicts the dynamics of cellular traction force generation and subsequent assembly of fibrils of the ECM protein fibronectin (FN). FN fibrils are the primary component in primordial ECM and, as such, FN assembly is a critical component in the cellular mechanical response. The model consists of a network of Hookean springs, each representing an extensible domain within an assembling FN fibril. As actomyosin forces stretch the spring network, simulations predict the resulting traction force and FN fibril formation. The model accurately predicts FN fibril morphometry and demonstrates a mechanism by which FN fibril assembly regulates traction force dynamics in response to mechanical stimuli and varying surrounding substrate stiffness.

Detection of an Integrin-Binding Mechanoswitch within Fibronectin during Tissue Formation and Fibrosis

Fibronectin (Fn) is an extracellular matrix protein that orchestrates complex cell adhesion and signaling through cell surface integrin receptors during tissue development, remodeling, and disease, such as fibrosis. Fn is sensitive to mechanical forces in its tandem type III repeats, resulting in extensive molecular enlongation. As such, it has long been hypothesized that cell- and tissue-derived forces may activate an "integrin switch" within the critical integrin-binding ninth and 10th type III repeats-conferring differential integrin-binding specificity, leading to differential cell responses. Yet, no direct evidence exists to prove the hypothesis nor demonstrate the physiological existence of the switch. We report direct experimental evidence for the Fn integrin switch both in vitro and ex vivo using a scFv engineered to detect the transient, force-induced conformational change, representing an opportunity for detection and targeting of early molecular signatures of cell contractile forces in tissue repair and disease.

Fibronectin fibrils regulate TGF-β1-induced Epithelial-Mesenchymal Transition

Epithelial-Mesenchymal Transition (EMT) is a dynamic process through which epithelial cells transdifferentiate from an epithelial phenotype into a mesenchymal phenotype. Previous studies have demonstrated that both mechanical signaling and soluble growth factor signaling facilitate this process. One possible point of integration for mechanical and growth factor signaling is the extracellular matrix. Here we investigate the role of the extracellular matrix (ECM) protein fibronectin (FN) in this process. We demonstrate that inhibition of FN fibrillogenesis blocks activation of the Transforming Growth Factor-Beta (TGF-β) signaling pathway via Smad2 signaling, decreases cell migration and ultimately leads to inhibition of EMT. Results show that soluble FN, FN fibrils, or increased contractile forces are insufficient to independently induce EMT. We further demonstrate that inhibition of latent TGF-β1 binding to FN fibrils via either a monoclonal blocking antibody against the growth factor binding domain of FN or through use of a FN deletion mutant that lacks the growth factor binding domains of FN blocks EMT progression, indicating a novel role for FN in EMT in which the assembly of FN fibrils serves to localize TGF-β1 signaling to drive EMT.

Spontaneous Unfolding-Refolding of Fibronectin Type III Domains Assayed by Thiol Exchange: THERMODYNAMIC STABILITY CORRELATES WITH RATES OF UNFOLDING RATHER THAN FOLDING

Globular proteins are not permanently folded but spontaneously unfold and refold on time scales that can span orders of magnitude for different proteins. A longstanding debate in the protein-folding field is whether unfolding rates or folding rates correlate to the stability of a protein. In the present study, we have determined the unfolding and folding kinetics of 10 FNIII domains. FNIII domains are one of the most common protein folds and are present in 2% of animal proteins. FNIII domains are ideal for this study because they have an identical seven-strand β-sandwich structure, but they vary widely in sequence and thermodynamic stability. We assayed thermodynamic stability of each domain by equilibrium denaturation in urea. We then assayed the kinetics of domain opening and closing by a technique known as thiol exchange. For this we introduced a buried Cys at the identical location in each FNIII domain and measured the kinetics of labeling with DTNB over a range of urea concentrations. A global fit of the kinetics data gave the kinetics of spontaneous unfolding and refolding in zero urea. We found that the folding rates were relatively similar, ∼0.1-1 s^-1, for the different domains. The unfolding rates varied widely and correlated with thermodynamic stability. Our study is the first to address this question using a set of domains that are structurally homologous but evolved with widely varying sequence identity and thermodynamic stability. These data add new evidence that thermodynamic stability correlates primarily with unfolding rate rather than folding rate. The study also has implications for the question of whether opening of FNIII domains contributes to the stretching of fibronectin matrix fibrils.

Studying early stages of fibronectin fibrillogenesis in living cells by atomic force microscopy

Time-lapse atomic force microscopy imaging is used to visualize the initial stages of fibronectin fibrillogenesis directly in living cells with high resolution. This approach provides new structural and mechanistic details, such as a stepwise extension mechanism and an accelerating effect of extracellular Mn²⁺ on early FN fibrillogenesis.

Fibronectin (FN) is an extracellular matrix protein that can be assembled by cells into large fibrillar networks, but the dynamics of FN remodeling and the transition through intermediate fibrillar stages are incompletely understood. Here we used a combination of fluorescence microscopy and time-lapse atomic force microscopy (AFM) to visualize initial stages of FN fibrillogenesis in living fibroblasts at high resolution. Initial FN nanofibrils form within <5 min of cell–matrix contact and subsequently extend at a rate of 0.25 μm/min at sites of cell membrane retraction. FN nanofibrils display a complex linear array of globular features spaced at varying distances, indicating the coexistence of different conformational states within the fibril. In some cases, initial fibrils extended in discrete increments of ∼800 nm during a series of cyclical membrane retractions, indicating a stepwise fibrillar extension mechanism. In presence of Mn²⁺, a known activator of integrin adhesion to FN, fibrillogenesis was accelerated almost threefold to 0.68 μm/min and fibrillar dimensions were increased, underlining the importance of integrin activation for early FN fibrillogenesis. FN fibrillogenesis visualized by time-lapse AFM thus provides new structural and mechanistic insight into initial steps of cell-driven FN fibrillogenesis.

Dynamic structure of plasma fibronectin

Fibronectin is a large vertebrate glycoprotein that is found in soluble and insoluble forms and involved in diverse processes. Protomeric fibronectin is a dimer of subunits, each of which comprises 29-31 modules - 12 type I, two type II and 15-17 type III. Plasma fibronectin is secreted by hepatocytes and circulates in a compact conformation before it binds to cell surfaces, converts to an extended conformation and is assembled into fibronectin fibrils. Here we review biophysical and structural studies that have shed light on how plasma fibronectin transitions from the compact to the extended conformation. The three types of modules each have a well-organized secondary and tertiary structure as defined by NMR and crystallography and have been likened to "beads on a string". There are flexible sequences in the N-terminal tail, between the fifth and sixth type I modules, between the first two and last two of the type III modules, and at the C-terminus. Several specific module-module interactions have been identified that likely maintain the compact quaternary structure of circulating fibronectin. The quaternary structure is perturbed in response to binding events, including binding of fibronectin to the surface of vertebrate cells for fibril assembly and to bacterial adhesins.

Structure and unfolding of the third type III domain from human fibronectin

Fibronectin is a modular extracellular matrix protein that is essential for vertebrate development. The third type III domain (3FN3) in fibronectin interacts with other parts of fibronectin and with anastellin, a protein fragment that causes fibronectin aggregation. 3FN3 opens readily both as an isolated domain in solution and when part of fibronectin in stretched fibrils, and it was proposed that this opening is important for anastellin binding. We determined the structure of 3FN3 using nuclear magnetic resonance spectroscopy, and we investigated its stability, folding, and unfolding. Similar to most other FN3 domains, 3FN3 contains two antiparallel β-sheets that are composed of three (A, B, and E) and four (C, D, F, and G) β-strands, respectively, and are held together by a conserved hydrophobic interface. cis-trans isomerization of P847 at the end of β-strand C leads to observable conformational heterogeneity in 3FN3, with a cis peptide bond present in almost one-quarter of the molecules. The chemical stability of 3FN3 is relatively low, but the folding rate constant in the absence of denaturant is in the same range as those of other, more stable FN3 domains. Interestingly, the unfolding rate constant in the absence of denaturant is several orders of magnitude higher than the unfolding rate constants of other FN3 domains investigated to date. This unusually fast rate is comparable to the rate of binding of 3FN3 to anastellin at saturating anastellin concentrations, consistent with the model in which 3FN3 has to unfold to interact with anastellin.

Studying early stages of fibronectin fibrillogenesis in living cells by atomic force microscopy

Fibronectin (FN) is an extracellular matrix protein that can be assembled by cells into large fibrillar networks, but the dynamics of FN remodeling and the transition through intermediate fibrillar stages are incompletely understood. Here we used a combination of fluorescence microscopy and time-lapse atomic force microscopy (AFM) to visualize initial stages of FN fibrillogenesis in living fibroblasts at high resolution. Initial FN nanofibrils form within <5 min of cell–matrix contact and subsequently extend at a rate of 0.25 μm/min at sites of cell membrane retraction. FN nanofibrils display a complex linear array of globular features spaced at varying distances, indicating the coexistence of different conformational states within the fibril. In some cases, initial fibrils extended in discrete increments of ∼800 nm during a series of cyclical membrane retractions, indicating a stepwise fibrillar extension mechanism. In presence of Mn2+, a known activator of integrin adhesion to FN, fibrillogenesis was accelerated almost threefold to 0.68 μm/min and fibrillar dimensions were increased, underlining the importance of integrin activation for early FN fibrillogenesis. FN fibrillogenesis visualized by time-lapse AFM thus provides new structural and mechanistic insight into initial steps of cell-driven FN fibrillogenesis.

Heparin-induced conformational changes of fibronectin within the extracellular matrix promote hMSC osteogenic differentiation

Heparin switches the conformation of relaxed fibrillar fibronectin. This conformation upregulates osteogenic differentiation of hMSCs, but only when locked-in by fixation.

Disentangling the multifactorial contributions of fibronectin, collagen and cyclic strain on MMP expression and extracellular matrix remodeling by fibroblasts

Early wound healing is associated with fibroblasts assembling a provisional fibronectin-rich extracellular matrix (ECM), which is subsequently remodeled and interlaced by type I collagen. This exposes fibroblasts to time-variant sets of matrices during different stages of wound healing. Our goal was thus to gain insight into the ECM-driven functional regulation of human foreskin fibroblasts (HFFs) being either anchored to a fibronectin (Fn) or to a collagen-decorated matrix, in the absence or presence of cyclic mechanical strain. While the cells reoriented in response to the onset of uniaxial cyclic strain, cells assembled exogenously added Fn with a preferential Fn-fiber alignment along their new orientation. Exposure of HFFs to exogenous Fn resulted in an increase in matrix metalloproteinase (MMP) expression levels, i.e. MMP-15 (RT-qPCR), and MMP-9 activity (zymography), while subsequent exposure to collagen slightly reduced MMP-15 expression and MMP-9 activity compared to Fn-exposure alone. Cyclic strain upregulated Fn fibrillogenesis and actin stress fiber formation, but had comparatively little effect on MMP activity. We thus propose that the appearance of collagen might start to steer HFFs towards homeostasis, as it decreased both MMP secretion and the tension of Fn matrix fibrils as assessed by Fluorescence Resonance Energy Transfer. These results suggest that HFFs might have a high ECM remodeling or repair capacity in contact with Fn alone (early event), which is reduced in the presence of Col1 (later event), thereby down-tuning HFF activity, a processes which would be required in a tissue repair process to finally reach tissue homeostasis.

Forced protein unfolding leads to highly elastic and tough protein hydrogels

Protein-based hydrogels usually do not exhibit high stretchability or toughness, significantly limiting the scope of their potential biomedical applications. Here we report the engineering of a chemically cross-linked, highly elastic and tough protein hydrogel using a mechanically extremely labile, de novo-designed protein that assumes the classical ferredoxin-like fold structure. Due to the low mechanical stability of the ferredoxin-like fold structure, swelling of hydrogels causes a significant fraction of the folded domains to unfold. Subsequent collapse and aggregation of unfolded ferredoxin-like domains leads to intertwining of physically and chemically cross-linked networks, entailing hydrogels with unusual physical and mechanical properties: a negative swelling ratio, high stretchability and toughness. These hydrogels can withstand an average strain of 450% before breaking and show massive energy dissipation. Upon relaxation, refolding of the ferredoxin-like domains enables the hydrogel to recover its massive hysteresis. This novel biomaterial may expand the scope of hydrogel applications in tissue engineering.

Multiscale relationships between fibronectin structure and functional properties

Cell behavior is tightly coupled to the properties of the extracellular matrix (ECM) to which they attach. Fibronectin (Fn) forms a supermolecular, fibrillar component of the ECM that is prominent during development, wound healing and the progression of numerous diseases. This indicates that Fn has an important function in controlling cell behavior during dynamic events in vivo. The multiscale architecture of Fn molecules assembled into these fibers determines the ligand density of cell adhesion sites on the surface of the Fn fiber, Fn fiber porosity for cell signaling molecules such as growth factors, the mechanical stiffness of the Fn matrix and the adhesivity of Fn for its numerous soluble ligands. These parameters are altered by mechanical strain applied to the ECM. Recent efforts have attempted to link the molecular properties of Fn with bulk properties of Fn matrix fibers. Studies of isolated Fn fibers have helped to characterize the fiber's material properties and, in combination with models of Fn molecular behavior in the fibers, have begun to provide insights into the Fn molecular arrangement and intermolecular adhesions within the fibers. A review of these studies allows the development of an understanding of the mechanobiological functions of Fn.

Protein conformation as a regulator of cell–matrix adhesion

Conformational changes within proteins play key roles in the regulation of cell–matrix adhesion. We discuss the mechanisms involved in conformational regulation, including mechanical signals, posttranslational modifications and intrinsically disordered proteins.

Subunit disassembly pathway of human hemoglobin revealing the site-specific role of its cysteine residues

Cysteine residues play a unique role in human hemoglobin (Hb) by affecting its cooperative oxygen binding behavior and the stability of its tetrameric structure. However, how these cysteine residues fulfill their biophysical functions from the molecular level is yet unclear. Here we study the subunit disassembly pathway of human hemoglobin using the sulfhydryl reagent, p-hydroxymercuribenzoate (PMB) and investigate the functional roles of cysteine residues in human hemoglobin. We show evidence from the matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry that all three types of cysteine residues, including the surface-exposed βCys93 and the shielded αCys104 and βCys112 are reactive to PMB, resolving an issue long under debate. It is demonstrated that all three types of cysteine residues must be blocked by PMB to accomplish the subunit disassembly, and the PMB-cysteine reactions proceed in a stepwise manner with an order of βCys93, αCys104, and βCys112. The PMB reactions with the three different cysteine residues demonstrate strong site-specificity. The possible influence of PMB-cysteine reactions to the stability of various intersubunit salt bridges has been discussed based on the crystallographic structure of hemoglobin, providing insights in understanding the hemoglobin subunit disassembly pathway and the site-specific functional role of each cysteine residue in hemoglobin.

SLLISWD sequence in the 10FNIII domain initiates fibronectin fibrillogenesis

Fibronectin (FN) assembly into extracellular matrix is tightly regulated and essential to embryogenesis and wound healing. FN fibrillogenesis is initiated by cytoskeleton-derived tensional forces transmitted across transmembrane integrins onto RGD binding sequences within the tenth FN type III (10FNIII) domains. These forces unfold 10FNIII to expose cryptic FN assembly sites; however, a specific sequence has not been identified in 10FNIII. Our past steered molecular dynamics simulations modeling 10FNIII unfolding by force at its RGD loop predicted a mechanical intermediate with a solvent-exposed N terminus spanning the A and B β-strands. Here, we experimentally confirm that the predicted 23-residue cryptic peptide 1 (CP1) initiates FN multimerization, which is mediated by interactions with 10FNIII that expose hydrophobic surfaces that support 8-anilino-1-napthalenesulfonic acid binding. Localization of multimerization activity to the C terminus led to the discovery of a minimal 7-amino acid "multimerization sequence" (SLLISWD), which induces polymerization of FN and the clotting protein fibrinogen in addition to enhancing FN fibrillogenesis in fibroblasts. A point mutation at Trp-6 that reduces exposure of hydrophobic sites for 8-anilino-1-napthalenesulfonic acid binding and β-structure formation inhibits FN multimerization and prevents physiological cell-based FN assembly in culture. We propose a model for cell-mediated fibrillogenesis whereby cell traction force initiates a cascade of intermolecular exchange starting with the unfolding of 10FNIII to expose the multimerization sequence, which interacts with strand B of another 10FNIII domain via a Trp-mediated β-strand exchange to stabilize a partially unfolded intermediate that propagates FN self-assembly.

Alterations in molecular status of plasma fibronectin associated with aging of normal human individuals

OBJECTIVES

Senescence, progressive deterioration of many bodily functions might be associated with age-dependent alterations of plasma fibronectin (FN) molecular status (i.e., domain, glycotope, and molecular form expressions).

DESIGN AND METHODS

FN molecular status was analyzed in 127 plasma samples of healthy individuals in groups of newborns, and subjects aged 3-14, 15-39, 41-59, and 60-82 years by FN-ELISA, lectin-FN-ELISA, and immunoblotting using a set of domain-specific monoclonal antibodies, specific lectins, and monoclonal antibody to FN, respectively.

RESULTS

During the first four decades of human life the levels of cell-binding-, carboxyl-terminal-, collagen-, heparin-, and fibrin-domains of plasma FN gradually increased. In subjects aged up to 82 years the cell-binding and carboxyl-terminal FN domain concentrations did not change, while the heparin, fibrin, and collagen domains significantly increased. The relative reactivity of plasma FN with Maackia amurensis lectin, specific to α2,3-linked sialic acid, significantly decreased after birth, reaching a stable level in the subsequent life period, whereas with Sambucus nigra lectin, specific to α2,6-linked sialic acid, it significantly decreased in the 60-82 year old group. Moreover, the appearance of 280-kDa and 320-kDa FN bands, absent in young and mature healthy individuals, was found in the groups of 41-59 and 60-82 year olds.

CONCLUSIONS

The alterations of FN molecular status throughout growth, maturation and senescence might be associated not only with disturbances in the balance of FN production rate and degradation, but concomitantly with conformational rearrangements of FN and its engagement in age-related vascular remodeling processes.

PEGylated human plasma fibronectin is proteolytically stable, supports cell adhesion, cell migration, focal adhesion assembly, and fibronectin fibrillogenesis

Delayed wound healing in many chronic wounds has been linked to the degradation of fibronectin (FN) by abnormally high protease levels. We sought to develop a proteolytically stable and functionally active form of FN. For this purpose, we conjugated 3.35 kDa polyethylene glycol diacrylate (PEGDA) to human plasma fibronectin (HPFN). Conjugation of PEGDA to HPFN or HPFN PEGylation was characterized by an increase of approximately 16 kDa in the average molecular weight of PEGylated HPFN compared to native HPFN in SDS-PAGE gels. PEGylated HPFN was more resistant to α chymotrypsin or neutrophil elastase digestion than native HPFN: after 30 min incubation with α chymotrypsin, 56 and 90% of native and PEGylated HPFN respectively remained intact. PEGylated HPFN and native HPFN supported NIH 3T3 mouse fibroblast adhesion and spreading, migration and focal adhesion formation in a similar manner. Fluorescence microscopy showed that both native and PEGylated HPFN in the culture media were assembled into extracellular matrix (ECM) fibrils. Interestingly, when coated on surfaces, native but not PEGylated HPFN was assembled into the ECM of fibroblasts. The proteolytically stable PEGylated HPFN developed herein could be used to replenish FN levels in the chronic wound bed and promote tissue repair.

Using molecular mechanics to predict bulk material properties of fibronectin fibers

The structural proteins of the extracellular matrix (ECM) form fibers with finely tuned mechanical properties matched to the time scales of cell traction forces. Several proteins such as fibronectin (Fn) and fibrin undergo molecular conformational changes that extend the proteins and are believed to be a major contributor to the extensibility of bulk fibers. The dynamics of these conformational changes have been thoroughly explored since the advent of single molecule force spectroscopy and molecular dynamics simulations but remarkably, these data have not been rigorously applied to the understanding of the time dependent mechanics of bulk ECM fibers. Using measurements of protein density within fibers, we have examined the influence of dynamic molecular conformational changes and the intermolecular arrangement of Fn within fibers on the bulk mechanical properties of Fn fibers. Fibers were simulated as molecular strands with architectures that promote either equal or disparate molecular loading under conditions of constant extension rate. Measurements of protein concentration within micron scale fibers using deep ultraviolet transmission microscopy allowed the simulations to be scaled appropriately for comparison to in vitro measurements of fiber mechanics as well as providing estimates of fiber porosity and water content, suggesting Fn fibers are approximately 75% solute. Comparing the properties predicted by single molecule measurements to in vitro measurements of Fn fibers showed that domain unfolding is sufficient to predict the high extensibility and nonlinear stiffness of Fn fibers with surprising accuracy, with disparately loaded fibers providing the best fit to experiment. This work shows the promise of this microstructural modeling approach for understanding Fn fiber properties, which is generally applicable to other ECM fibers, and could be further expanded to tissue scale by incorporating these simulated fibers into three dimensional network models.

There is growing awareness of the role of mechanical properties within biological tissues. Cells both generate force and are sensitive to applied forces, however nuanced sensitivity to externally applied forces also extends outside the cell to the fibrous structural proteins of the extracellular matrix. It has been shown that stretching these proteins under force can change their biochemical properties in a way that impacts tissue function. In this work we were able, for the first time, to measure the concentration of protein within fibronectin extracellular matrix fibers. This key measurement then enabled us to evaluate a model that links mechanical properties of fibers directly to molecular structural changes that form the physical basis for force sensitivity. The model was found to be predictive of fiber mechanical properties without fitting. This combination of modeling and experiment also offers insights into molecular forces, as well as estimates of fiber hydration and porosity.

GFP's mechanical intermediate states

Green fluorescent protein (GFP) mutants have become the most widely used fluorescence markers in the life sciences, and although they are becoming increasingly popular as mechanical force or strain probes, there is little direct information on how their fluorescence changes when mechanically stretched. Here we derive high-resolution structural models of the mechanical intermediate states of stretched GFP using steered molecular dynamics (SMD) simulations. These structures were used to produce mutants of EGFP and EYFP that mimic GFP's different mechanical intermediates. A spectroscopic analysis revealed that a population of EGFP molecules with a missing N-terminal α-helix was significantly dimmed, while the fluorescence lifetime characteristic of the anionic chromophore state remained unaffected. This suggests a mechanism how N-terminal deletions can switch the protonation state of the chromophore, and how the fluorescence of GFP molecules in response to mechanical disturbance might be turned off.

Finding the weakest link: exploring integrin-mediated mechanical molecular pathways

From the extracellular matrix to the cytoskeleton, a network of molecular links connects cells to their environment. Molecules in this network transmit and detect mechanical forces, which subsequently determine cell behavior and fate. Here, we reconstruct the mechanical pathway followed by these forces. From matrix proteins to actin through integrins and adaptor proteins, we review how forces affect the lifetime of bonds and stretch or alter the conformation of proteins, and how these mechanical changes are converted into biochemical signals in mechanotransduction events. We evaluate which of the proteins in the network can participate in mechanotransduction and which are simply responsible for transmitting forces in a dynamic network. Besides their individual properties, we also analyze how the mechanical responses of a protein are determined by their serial connections from the matrix to actin, their parallel connections in integrin clusters and by the rate at which force is applied to them. All these define mechanical molecular pathways in cells, which are emerging as key regulators of cell function alongside better studied biochemical pathways.

Contribution of unfolding and intermolecular architecture to fibronectin fiber extensibility

The extracellular matrix contains components with remarkable mechanical properties, including fibronectin (Fn) fibers with extensibilities of >700% strain. We utilized what we consider a novel technique to quantify the extent of molecular unfolding that contributes to Fn fiber extension, and we compared this behavior with stochastic models of Fn fibers with different molecular arrangements. In vitro unfolding as a function of strain was measured by fluorescently labeling cysteines in modules FnIII7 and III15 in artificial Fn fibers. A calibration technique we also consider novel made it possible to demonstrate that 44% of cysteines in these modules were exposed in Fn fibers strained to 421% extension, up from 8% exposure without strain. In silico unfolding was measured by applying a constant strain rate to a fiber represented by a network of wormlike chain springs, each representing an individual Fn molecule. Unfolding rates were calculated with a tension-dependent stochastic model applied to FnIII modules in each molecule. A comparison of these approaches revealed that only a molecular arrangement permitting unequal mechanical loading of Fn molecules recapitulates in vitro unfolding. These data have implications for Fn-dependent mechanotransduction and give insight into how the molecular architecture of natural materials permits such remarkable extensibility.