Structural Basis of Stereospecificity in the Bacterial Enzymatic Cleavage of β-Aryl Ether Bonds in Lignin

Development of a rapid assay for β-etherase activity using a novel chromogenic substrate

Biocatalytic processes play a crucial role in the valorization of lignin; therefore, methods enabling the monitoring of enzymes such as β-etherases, capable of breaking β-O-4 aryl-ether bonds, are of significant biotechnological interest. A novel method for quantifying β-etherase activity was developed based on the β-ester bond formation between a chromophore and acetovainillone. The chromogenic substrate β-(ρ-nitrophenoxy)-α-acetovanillone (PNPAV), was chemically synthesized. Kintetic monitoring of ρ-nitrophenolate release at 410 nm over 10 min, using recombinant LigF from Sphingobium sp SYK-6, LigF-AB and LigE-AB from Althererytrobacter sp B11, yielded enzimatic activities of 404. 3 mU/mg, 72 mU/mg, and 50 mU/mg, respectively. This method is applicable in a pH range of 7.0-9.0, with a sensitivity of up to 50 ng of enzyme, exhibiting no interference with lipolytic, glycolytic, proteolytic, and oxidoreductase enzymes.

The chemical logic of enzymatic lignin degradation

Lignin is an aromatic heteropolymer, found in plant cell walls as 20-30% of lignocellulose. It represents the most abundant source of renewable aromatic carbon in the biosphere, hence, if it could be depolymerised efficiently, then it would be a highly valuable source of renewable aromatic chemicals. However, lignin presents a number of difficulties for biocatalytic or chemocatalytic breakdown. Research over the last 10 years has led to the identification of new bacterial enzymes for lignin degradation, and the use of metabolic engineering to generate useful bioproducts from microbial lignin degradation. The aim of this article is to discuss the chemical mechanisms used by lignin-degrading enzymes and microbes to break down lignin, and to describe current methods for generating aromatic bioproducts from lignin using enzymes and engineered microbes.

Cloning, expression, and biochemical characterization of β-etherase LigF from Altererythrobacter sp. B11

Lignin, a complex heteropolymer present in plant cell walls, is now recognized as a valuable renewable resource with potential applications in various industries. The lignin biorefinery concept, which aims to convert lignin into value-added products, has gained significant attention in recent years. β-etherases, enzymes that selectively cleave β-O-4 aryl ether bonds in lignin, have shown promise in lignin depolymerization. In this study, the β-etherase LigF from Altererythrobacter sp. B11 was cloned, expressed, purified, and biochemically characterized. The LigF-AB11 enzyme exhibited optimal activity at 32 °C and pH 8.5 when catalyzing the substrate PNP-AV. The enzyme displayed mesophilic behavior and demonstrated higher activity at moderate temperatures. Stability analysis revealed that LigF-AB11 was not thermostable, with a complete loss of activity at 60 °C within an hour. Moreover, LigF-AB11 exhibited excellent pH stability, retaining over 50 % of its activity after 1 h under pH conditions ranging from 3.0 to 11.0. Metal ions and surface impregnation agents were found to affect the enzyme's activity, highlighting the importance of considering these factors in enzymatic processes for lignin depolymerization. This study provides valuable insights into the biochemical properties of LigF-AB11 and contributes to the development of efficient enzymatic processes for lignin biorefineries. Further optimization and understanding of β-etherases will facilitate their practical application in the valorization of lignin.

Catalytic and molecular properties of alkaliphilic and thermotolerant β-etherase from Altererythrobacter sp. B11

Phenylpropanone monomers, including guaiacyl hydroxypropanone, are important precursors for the synthesis of various chemicals. The monomers are obtained in a three-step cascade reaction catalyzed by a group of enzymes in the β-etherase system that cleaves the β-O-4 bond, the major bond in lignin. In this study, one of the β-etherase of the glutathione-S-transferase superfamily, AbLigF2, was discovered in genus Altererythrobacter, and the recombinant etherase was characterized. The enzyme showed maximal activity at 45 °C, maintained 30% of its activity after 2 h at 50 °C, and was the most thermostable among the previously reported enzymes. Moreover, N13, S14, and S115, located near the thiol group of glutathione, had a significant effect on the maximum reaction rate of enzyme activity. This study suggests that AbLigF2 has the potential to serve as a thermostable enzyme for lignin utilization and provides insights into its catalytic mechanism.

Efficient Monofluoroalkylation of Thiophenols or Phenols with α-Bromo-α-Fluoroketones under Mild Conditions

An efficient nucleophilic substitution reaction between α-bromo-α-fluoroketones and thiophenols or phenols is reported for the synthesis of α-fluoro-β-ketosulfides or α-fluoro-β-ketone ethers in yields ranging from 78–93%. This method exhibits good functional group tolerance and a broad scope of nucleophilic substrates, including natural phenolic compounds.

Mitochondrial sorting and assembly machinery operates by β-barrel switching

The mitochondrial outer membrane contains so-called β-barrel proteins, which allow communication between the cytosol and the mitochondrial interior^1-3. Insertion of β-barrel proteins into the outer membrane is mediated by the multisubunit mitochondrial sorting and assembly machinery (SAM, also known as TOB)^4-6. Here we use cryo-electron microscopy to determine the structures of two different forms of the yeast SAM complex at a resolution of 2.8-3.2 Å. The dimeric complex contains two copies of the β-barrel channel protein Sam50-Sam50a and Sam50b-with partially open lateral gates. The peripheral membrane proteins Sam35 and Sam37 cap the Sam50 channels from the cytosolic side, and are crucial for the structural and functional integrity of the dimeric complex. In the second complex, Sam50b is replaced by the β-barrel protein Mdm10. In cooperation with Sam50a, Sam37 recruits and traps Mdm10 by penetrating the interior of its laterally closed β-barrel from the cytosolic side. The substrate-loaded SAM complex contains one each of Sam50, Sam35 and Sam37, but neither Mdm10 nor a second Sam50, suggesting that Mdm10 and Sam50b function as placeholders for a β-barrel substrate released from Sam50a. Our proposed mechanism for dynamic switching of β-barrel subunits and substrate explains how entire precursor proteins can fold in association with the mitochondrial machinery for β-barrel assembly.

Roles of two glutathione S-transferases in the final step of the β-aryl ether cleavage pathway in Sphingobium sp. strain SYK-6

Sphingobium sp. strain SYK-6 is an alphaproteobacterial degrader of lignin-derived aromatic compounds, which can degrade all the stereoisomers of β-aryl ether-type compounds. SYK-6 cells convert four stereoisomers of guaiacylglycerol-β-guaiacyl ether (GGE) into two enantiomers of α-(2-methoxyphenoxy)-β-hydroxypropiovanillone (MPHPV) through GGE α-carbon atom oxidation by stereoselective Cα-dehydrogenases encoded by ligD, ligL, and ligN. The ether linkages of the resulting MPHPV enantiomers are cleaved by stereoselective glutathione (GSH) S-transferases (GSTs) encoded by ligF, ligE, and ligP, generating (βR/βS)-α-glutathionyl-β-hydroxypropiovanillone (GS-HPV) and guaiacol. To date, it has been shown that the gene products of ligG and SLG_04120 (ligQ), both encoding GST, catalyze GSH removal from (βR/βS)-GS-HPV, forming achiral β-hydroxypropiovanillone. In this study, we verified the enzyme properties of LigG and LigQ and elucidated their roles in β-aryl ether catabolism. Purified LigG showed an approximately 300-fold higher specific activity for (βR)-GS-HPV than that for (βS)-GS-HPV, whereas purified LigQ showed an approximately six-fold higher specific activity for (βS)-GS-HPV than that for (βR)-GS-HPV. Analyses of mutants of ligG, ligQ, and both genes revealed that SYK-6 converted (βR)-GS-HPV using both LigG and LigQ, whereas only LigQ was involved in converting (βS)-GS-HPV. Furthermore, the disruption of both ligG and ligQ was observed to lead to the loss of the capability of SYK-6 to convert MPHPV. This suggests that GSH removal from GS-HPV catalyzed by LigG and LigQ, is essential for cellular GSH recycling during β-aryl ether catabolism.

Lignin Degradation and Its Use in Signaling Development by the Coprophilous Ascomycete Podospora anserina

The filamentous fungus Podospora anserina is a good model to study the breakdown of lignocellulose, owing to its ease of culture and genetical analysis. Here, we show that the fungus is able to use a wide range of lignocellulosic materials as food sources. Using color assays, spectroscopy and pyrolysis-gas chromatography mass spectrometry, we confirm that this ascomycete is able to degrade lignin, primarily by hydrolyzing β-O-4 linkages, which facilitates its nutrient uptake. We show that the limited weight loss that is promoted when attacking Miscanthus giganteus is due to a developmental blockage rather than an inefficiency of its enzymes. Finally, we show that lignin, and, more generally, phenolics, including degradation products of lignin, greatly stimulate the growth and fertility of the fungus in liquid cultures. Analyses of the CATΔΔΔΔΔ mutant lacking all its catalases, pro-oxidants and antioxidants indicate that improved growth and fertility of the fungus is likely caused by augmented reactive oxygen species levels triggered by the presence of phenolics.

Nucleophilic Thiols Reductively Cleave Ether Linkages in Lignin Model Polymers and Lignin

Lignin may serve as a renewable feedstock for the production of chemicals and fuels if mild, scalable processes for its depolymerization can be devised. The use of small organic thiols represents a bioinspired strategy to cleave the β-O-4 bond, the most common linkage in lignin. In the present study, synthetic β-O-4 linked polymers were treated with organic thiols, yielding up to 90 % cleaved monomer products. Lignin extracted from poplar was also treated with organic thiols resulting in molecular weight reductions as high as 65 % (Mn ) in oxidized lignin. Thiol-based cleavage of other lignin linkages was also explored in small-molecule model systems to uncover additional potential pathways by which thiols might depolymerize lignin. The success of thiol-mediated cleavage on model dimers, polymers, and biomass-derived lignin illustrates the potential utility of small redox-active molecules to penetrate complex polymer matrices for depolymerization and subsequent valorization of lignin into fuels and chemicals.

Acidic Versus Alkaline Bacterial Degradation of Lignin Through Engineered Strain E. coli BL21(Lacc): Exploring the Differences in Chemical Structure, Morphology, and Degradation Products

There is increasing interest in research on lignin biodegradation compounds as potential building blocks in applications related to renewable products. More attention is necessary to evaluate the effects of the initial pH conditions during the bacterial degradation of lignin. In this study we performed experiments on lignin biodegradation under acidic and mild alkaline conditions. For acidic biodegradation, lignin was chemically pretreated with hydrogen peroxide. Alkaline biodegradation was achieved by developing the bacterial growth on Luria and Bertani medium with alkali lignin as the sole carbon source. The mutant strain Escherichia coli BL21(Lacc) was used to carry out lignin biodegradation over 10 days of incubation. Results demonstrated that under acidic conditions there was a predominance of aliphatic compounds of the C₃–C₄ type. Alkaline biodegradation was produced in the context of oxidative stress, with a greater abundance of aryl compounds. The final pH values of acidic and alkaline biodegradation of lignin were 2.53 and 7.90, respectively. The results of the gas chromatography mass spectrometry analysis detected compounds such as crotonic acid, lactic acid and 3-hydroxybutanoic acid for acidic conditions, with potential applications for adhesives and polymer precursors. Under alkaline conditions, detected compounds included 2-phenylethanol and dehydroabietic acid, with potential applications for perfumery and anti tumor/anti-inflammatory medications. Size-exclusion chromatography analysis showed that the weight-average molecular weight of the alkaline biodegraded lignin increased by 6.75-fold compared to the acidic method, resulting in a repolymerization of its molecular structure. Lignin repolymerization coincided with an increase in the relative abundance of dehydroabietic acid and isovanillyl alcohol, from 2.70 and 3.96% on day zero to 13.43 and 10.26% on 10th day. The results of the Fourier-transformed Infrared spectroscopy detected the presence of C = O bond and OH functional group associated with carboxylic acids in the acidic method. In the alkaline method there was a greater preponderance of signals related to skeletal aromatic structures, the amine functional group and the C – O – bond. Lignin biodegradation products from E. coli BL21(Lacc), under different initial pH conditions, demonstrated a promising potential to enlarge the spectrum of renewable products for biorefinery activities.

Structural and functional divergence of GDAP1 from the glutathione S-transferase superfamily

Mutations in ganglioside-induced differentiation-associated protein 1 (GDAP1) alter mitochondrial morphology and result in several subtypes of the inherited peripheral neuropathy Charcot-Marie-Tooth disease; however, the mechanism by which GDAP1 functions has remained elusive. GDAP1 contains primary sequence homology to the GST superfamily; however, the question of whether GDAP1 is an active GST has not been clearly resolved. Here, we present biochemical evidence, suggesting that GDAP1 has lost the ability to bind glutathione without a loss of substrate binding activity. We have revealed that the α-loop, located within the H-site motif is the primary determinant for substrate binding. Using structural data of GDAP1, we have found that critical residues and configurations in the G-site which canonically interact with glutathione are altered in GDAP1, rendering it incapable of binding glutathione. Last, we have found that the overexpression of GDAP1 in HeLa cells results in a mitochondrial phenotype which is distinct from oxidative stress-induced mitochondrial fragmentation. This phenotype is dependent on the presence of the transmembrane domain, as well as a unique hydrophobic domain that is not found in canonical GSTs. Together, we data point toward a non-enzymatic role for GDAP1, such as a sensor or receptor.

Crystal structures of the two domains that constitute the Plasmodium vivax p43 protein

Scaffold modules known as aminoacyl-tRNA synthetase (aaRS)-interacting multifunctional proteins (AIMPs), such as AIMP1/p43, AIMP2/p38 and AIMP3/p18, are important in driving the assembly of multi-aaRS (MARS) complexes in eukaryotes. Often, AIMPs contain an N-terminal glutathione S-transferase (GST)-like domain and a C-terminal OB-fold tRNA-binding domain. Recently, the apicomplexan-specific Plasmodium falciparum p43 protein (Pfp43) has been annotated as an AIMP and its tRNA binding, tRNA import and membrane association have been characterized. The crystal structures of both the N- and C-terminal domains of the Plasmodium vivax p43 protein (Pvp43), which is an ortholog of Pfp43, have been resolved. Analyses reveal the overall oligomeric structure of Pvp43 and highlight several notable features that show Pvp43 to be a soluble, cytosolic protein. The dimeric assembly of the N-terminal GST-like domain of Pvp43 differs significantly from canonical GST dimers, and it is tied to the C-terminal tRNA-binding domain via a linker region. This work therefore establishes a framework for dissecting the additional roles of p43 orthologs in eukaryotic multi-protein MARS complexes.

Phenolic cross-links: building and de-constructing the plant cell wall

Covering: Up to 2019Phenolic cross-links and phenolic inter-unit linkages result from the oxidative coupling of two hydroxycinnamates or two molecules of tyrosine. Free dimers of hydroxycinnamates, lignans, play important roles in plant defence. Cross-linking of bound phenolics in the plant cell wall affects cell expansion, wall strength, digestibility, degradability, and pathogen resistance. Cross-links mediated by phenolic substituents are particularly important as they confer strength to the wall via the formation of new covalent bonds, and by excluding water from it. Four biopolymer classes are known to be involved in the formation of phenolic cross-links: lignins, extensins, glucuronoarabinoxylans, and side-chains of rhamnogalacturonan-I. Lignins and extensins are ubiquitous in streptophytes whereas aromatic substituents on xylan and pectic side-chains are commonly assumed to be particular features of Poales sensu lato and core Caryophyllales, respectively. Cross-linking of phenolic moieties proceeds via radical formation, is catalyzed by peroxidases and laccases, and involves monolignols, tyrosine in extensins, and ferulate esters on xylan and pectin. Ferulate substituents, on xylan in particular, are thought to be nucleation points for lignin polymerization and are, therefore, of paramount importance to wall architecture in grasses and for the development of technology for wall disassembly, e.g. for the use of grass biomass for production of 2^nd generation biofuels. This review summarizes current knowledge on the intra- and extracellular acylation of polysaccharides, and inter- and intra-molecular cross-linking of different constituents. Enzyme mediated lignan in vitro synthesis for pharmaceutical uses are covered as are industrial exploitation of mutant and transgenic approaches to control cell wall cross-linking.

Database Mining for Novel Bacterial β-Etherases, Glutathione-Dependent Lignin-Degrading Enzymes

Lignin is the most abundant aromatic polymer in nature and a promising renewable source for the provision of aromatic platform chemicals and biofuels. β-Etherases are enzymes with a promising potential for application in lignin depolymerization due to their selectivity in the cleavage of β-O-4 aryl ether bonds. However, only a very limited number of these enzymes have been described and characterized so far. Using peptide pattern recognition (PPR) as well as phylogenetic analyses, 96 putatively novel β-etherases have been identified, some even originating from bacteria outside the order Sphingomonadales A set of 13 diverse enzymes was selected for biochemical characterization, and β-etherase activity was confirmed for all of them. Some enzymes displayed up to 3-fold higher activity than previously known β-etherases. Moreover, conserved sequence motifs specific for either LigE- or LigF-type enzymes were deduced from multiple-sequence alignments and the PPR-derived peptides. In combination with structural information available for the β-etherases LigE and LigF, insight into the potential structural and/or functional role of conserved residues within these sequence motifs is provided. Phylogenetic analyses further suggest the presence of additional bacterial enzymes with potential β-etherase activity outside the classical LigE- and LigF-type enzymes as well as the recently described heterodimeric β-etherases.IMPORTANCE The use of biomass as a renewable source and replacement for crude oil for the provision of chemicals and fuels is of major importance for current and future societies. Lignin, the most abundant aromatic polymer in nature, holds promise as a renewable starting material for the generation of required aromatic structures. However, a controlled and selective lignin depolymerization to yield desired aromatic structures is a very challenging task. In this regard, bacterial β-etherases are especially interesting, as they are able to cleave the most abundant bond type in lignin with high selectivity. With this study, we significantly expanded the toolbox of available β-etherases for application in lignin depolymerization and discovered more active as well as diverse enzymes than previously known. Moreover, the identification of further β-etherases by sequence database mining in the future will be facilitated considerably through our deduced etherase-specific sequence motifs.

Biomimetic Reductive Cleavage of Keto Aryl Ether Bonds by Small-Molecule Thiols

The nucleophilic and reductive properties of thiolates and thiols make them ideal candidates as redox mediators via the thiol/disulfide couple. One mechanism for biological lignin depolymerization entails reduction of keto aryl ether bonds by an S_N 2 mechanism with the thiol redox mediator glutathione. In this study, mimicking this chemistry in a simple protein- and metal-free process, several small organic thiols are surveyed for their ability to cleave aryl keto ethers that model the β-O-4 linkages found in partially oxidized lignin. In polar aprotic solvents, β-mercaptoethanol and dithiothreitol yielded up to 100 % formation of phenol and acetophenone products from 2-phenoxyacetophenone, but not from its reduced alcohol congener. The effects of reaction conditions and of substituents on the aryl rings and the keto ether linkage are assessed. These results, together with activation barriers computed by quantum chemical simulations and direct observation of the expected intermediate thioether, point to an S_N 2 mechanism. This study confirms that small organic thiols can reductively break down lignin-relevant keto aryl ether linkages.

Identification of key residues for activities of atypical glutathione S-transferase of Ceriporiopsis subvermispora, a selective degrader of lignin in woody biomass, by crystallography and functional mutagenesis

Ceriporiopsis subvermispora (C. subvermispora) is a selective degrader of lignin in the woody biomass. Glutathione S-transferases (GSTs) are multifunctional enzymes that play important roles in cellular detoxification and metabolism. The crystal structures of a GST of C. subvermispora, CsGST83044, in GSH-free and -bound forms were solved at 1.95 and 2.19 Å resolution, respectively. The structure of the GSH-bound form revealed that CsGST83044 can be categorized as an atypical-type of GST. In the GSH-bound form of CsGST83044, Asn22, Asn24, and Tyr46 are located closest to the sulfur atom and form hydrogen bonds with the thiol group. The functional mutagenesis indicated that they are critical for the enzymatic activities of CsGST83044. The critical residues of an atypical-type GST belonging to the GSTFuA class were revealed for the first time. A previous study indicated that CsGST83044 and another GST, CsGST63524, differ in substrate preference; CsGST83044 prefers smaller substrates than CsGST63524 for its esterase activity. The GSH-bound pocket of CsGST83044 turns out to be small, which may explain the preference for smaller substrates. Protein engineering of GSTs of C. subvermispora in the light of the obtained insight may pave a path in the future for utilization of the woody biomass.

Structure of a serine-type glutathione S-transferase of Ceriporiopsis subvermispora and identification of the enzymatically important non-canonical residues by functional mutagenesis

Ceriporiopsis subvermispora (C. subvermispora), one of the white-rot fungi, is known as a selective lignin degrader of the woody biomass. Glutathione S-transferases (GSTs) are multifunctional enzymes that are capable of catalyzing the reactions involved in detoxification and metabolic pathways. In this study, a GST of C. subvermispora, named CsGST63524, was overexpressed in E. coli, and then purified by affinity, anion exchange, and size exclusion column chromatography. The crystal structures of the CsGST63524 in ligand-free and complex with GSH were refined at 2.45 and 2.50 Å resolutions, respectively. The sulfur atom of glutathione forms a hydrogen bond with Ser21 of CsGST63524, indicating it is a serine-type GST. Mutagenesis of Ser21 unexpectedly indicated that this serine residue is not essential for the enzymatic activity of CsGST63524. Comparative sequence and structural analyses, together with functional mutagenesis, newly identified the enzymatically important non-canonical amino acid residues, Asn23 and Tyr45, other than the serine residue.

A heterodimeric glutathione S-transferase that stereospecifically breaks lignin's β(R)-aryl ether bond reveals the diversity of bacterial β-etherases

Lignin is a heterogeneous polymer of aromatic subunits that is a major component of lignocellulosic plant biomass. Understanding how microorganisms deconstruct lignin is important for understanding the global carbon cycle and could aid in developing systems for processing plant biomass into valuable commodities. Sphingomonad bacteria use stereospecific glutathione S-transferases (GSTs) called β-etherases to cleave the β-aryl ether (β-O-4) bond, the most common bond between aromatic subunits in lignin. Previously characterized bacterial β-etherases are homodimers that fall into two distinct GST subclasses: LigE homologues, which cleave the β(R) stereoisomer of the bond, and LigF homologues, which cleave the β(S) stereoisomer. Here, we report on a heterodimeric β-etherase (BaeAB) from the sphingomonad Novosphingobium aromaticivorans that stereospecifically cleaves the β(R)-aryl ether bond of the di-aromatic compound β-(2-methoxyphenoxy)-γ-hydroxypropiovanillone (MPHPV). BaeAB's subunits are phylogenetically distinct from each other and from other β-etherases, although they are evolutionarily related to LigF, despite the fact that BaeAB and LigF cleave different β-aryl ether bond stereoisomers. We identify amino acid residues in BaeAB's BaeA subunit important for substrate binding and catalysis, including an asparagine that is proposed to activate the GSH cofactor. We also show that BaeAB homologues from other sphingomonads can cleave β(R)-MPHPV and that they may be as common in bacteria as LigE homologues. Our results suggest that the ability to cleave the β-aryl ether bond arose independently at least twice in GSTs and that BaeAB homologues may be important for cleaving the β(R)-aryl ether bonds of lignin-derived oligomers in nature.

Rapid characterization of the activities of lignin-modifying enzymes based on nanostructure-initiator mass spectrometry (NIMS)

BACKGROUND

Producing valuable fuels and chemicals from lignin is a key factor for making lignocellulosic biomass economically feasible; however, significant roadblocks exist due to our lack of detailed understanding of how lignin is enzymatically depolymerized and of the range of possible lignin fragments that can be produced. Development of suitable enzymatic assays for characterization of putative lignin active enzymes is an important step towards improving our understanding of the catalytic activities of relevant enzymes. Previously, we have successfully built an assay platform based on glycan substrates containing a charged perfluorinated tag and nanostructure-initiator mass spectrometry to study carbohydrate active enzymes, especially various glycosyl hydrolyses. Here, we extend this approach to develop a reliable and rapid assay to study lignin-modifying enzymes.

RESULTS

Two β-aryl ether bond containing model lignin dimer substrates, designed to be suitable for studying the activities of lignin-modifying enzymes (LMEs) by nanostructure-initiator mass spectrometry (NIMS), were successful synthesized. Small-angle neutron scattering experiments showed that these substrates form micelles in solution. Two LMEs, laccase from the polypore mushroom Trametes versicolor, and manganese peroxidase (MnP) from white rot fungus Nematoloma frowardii, were tested for catalytic activity against the two model substrates. We show that the reaction of laccase and MnP with phenolic substrate yields products that arise from the cleavage of the carbon-carbon single bond between the α-carbon and the adjacent aryl carbon, consistent with the mechanism for producing phenoxy radical as reaction intermediates. Reactions of the nonphenolic substrate with laccase, on the other hand, adopt a different pathway by producing an α-oxidation product; as well as the cleavage of the β-aryl ether bond. No cleavage of the carbon-carbon bond between the α-carbon and the aryl carbon was observed. To facilitate understanding of reaction kinetics, the reaction time course for laccase activity on the phenolic substrate (I) was generated by the simultaneous measurement of all products at different time points of the reaction. Withdrawal of only a small sample aliquot (0.2 μL at each time point) ensured minimum perturbation of the reaction. The time course can help us to understand the enzyme kinetics.

CONCLUSIONS

A new assay procedure has been developed for studying lignin-modifying enzymes by nanostructure-initiator mass spectrometry. Enzyme assays of a laccase and a MnP on phenolic and nonphenolic β-aryl ether substrates revealed different primary reaction pathways due to the availability of the phenoxy radical intermediates. Our assay provides a wealth of information on bond cleavage events not available using conventional colorimetric assays and can easily be carried out in microliter volumes and the quantitative analysis of product formation and kinetics is rapidly achieved by NIMS. This is the first time that NIMS technology was applied to study the activities of lignin-modifying enzymes. Unlike other previous works, our use of amphiphilic guaiacylglycerol β-O-4 substrate (I) enables the formation of micelles. This approach helps avoid the re-polymerization of the resulting monomeric product. As a result, our assay can clearly demonstrate the degradation pathways of phenolic guaiacylglycerol β-O-4 type of molecules with laccase and MnP.

Alternatives for Chemical and Biochemical Lignin Valorization: Hot Topics from a Bibliometric Analysis of the Research Published During the 2000–2016 Period

A complete bibliometric analysis of the Scopus database was performed to identify the research trends related to lignin valorization from 2000 to 2016. The results from this analysis revealed an exponentially increasing number of publications and a high relevance of interdisciplinary collaboration. The simultaneous valorization of the three main components of lignocellulosic biomass (cellulose, hemicellulose, and lignin) has been revealed as a key aspect and optimal pretreatment is required for the subsequent lignin valorization. Research covers the determination of the lignin structure, isolation, and characterization; depolymerization by thermal and thermochemical methods; chemical, biochemical and biological conversion of depolymerized lignin; and lignin applications. Most methods for lignin depolymerization are focused on the selective cleavage of the β-O-4 linkage. Although many depolymerization methods have been developed, depolymerization with sodium hydroxide is the dominant process at industrial scale. Oxidative conversion of lignin is the most used method for the chemical lignin upgrading. Lignin uses can be classified according to its structure into lignin-derived aromatic compounds, lignin-derived carbon materials and lignin-derived polymeric materials. There are many advances in all approaches, but lignin-derived polymeric materials appear as a promising option.

Microbial β-etherases and glutathione lyases for lignin valorisation in biorefineries: current state and future perspectives

Lignin is the major aromatic biopolymer in nature, and it is considered a valuable feedstock for the future supply of aromatics. Hence, its valorisation in biorefineries is of high importance, and various chemical and enzymatic approaches for lignin depolymerisation have been reported. Among the enzymes known to act on lignin, β-etherases offer the possibility for a selective cleavage of the β-O-4 aryl ether bonds present in lignin. These enzymes, together with glutathione lyases, catalyse a reductive, glutathione-dependent ether bond cleavage displaying high stereospecificity. β-Etherases and glutathione lyases both belong to the superfamily of glutathione transferases, and several structures have been solved recently. Additionally, different approaches for their application in lignin valorisation have been reported in the last years. This review gives an overview on the current knowledge on β-etherases and glutathione lyases, their biochemical and structural features, and critically discusses their potential for application in biorefineries.

Bacterial Catabolism of β-Hydroxypropiovanillone and β-Hydroxypropiosyringone Produced in the Reductive Cleavage of Arylglycerol-β-Aryl Ether in Lignin

Sphingobium sp. strain SYK-6 converts four stereoisomers of arylglycerol-β-guaiacyl ether into achiral β-hydroxypropiovanillone (HPV) via three stereospecific reaction steps. Here, we determined the HPV catabolic pathway and characterized the HPV catabolic genes involved in the first two steps of the pathway. In SYK-6 cells, HPV was oxidized to vanilloyl acetic acid (VAA) via vanilloyl acetaldehyde (VAL). The resulting VAA was further converted into vanillate through the activation of VAA by coenzyme A. A syringyl-type HPV analog, β-hydroxypropiosyringone (HPS), was also catabolized via the same pathway. SLG_12830 (hpvZ), which belongs to the glucose-methanol-choline oxidoreductase family, was isolated as the HPV-converting enzyme gene. An hpvZ mutant completely lost the ability to convert HPV and HPS, indicating that hpvZ is essential for the conversion of both the substrates. HpvZ produced in Escherichia coli oxidized both HPV and HPS and other 3-phenyl-1-propanol derivatives. HpvZ localized to both the cytoplasm and membrane of SYK-6 and used ubiquinone derivatives as electron acceptors. Thirteen gene products of the 23 aldehyde dehydrogenase (ALDH) genes in SYK-6 were able to oxidize VAL into VAA. Mutant analyses suggested that multiple ALDH genes, including SLG_20400, contribute to the conversion of VAL. We examined whether the genes encoding feruloyl-CoA synthetase (ferA) and feruloyl-CoA hydratase/lyase (ferB and ferB2) are involved in the conversion of VAA. Only FerA exhibited activity toward VAA; however, disruption of ferA did not affect VAA conversion. These results indicate that another enzyme system is involved in VAA conversion.IMPORTANCE Cleavage of the β-aryl ether linkage is the most essential process in lignin biodegradation. Although the bacterial β-aryl ether cleavage pathway and catabolic genes have been well documented, there have been no reports regarding the catabolism of HPV or HPS, the products of cleavage of β-aryl ether compounds. HPV and HPS have also been found to be obtained from lignin by chemoselective catalytic oxidation by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone/tert-butyl nitrite/O₂, followed by cleavage of the β-aryl ether with zinc. Therefore, value-added chemicals are expected to be produced from these compounds. In this study, we determined the SYK-6 catabolic pathways for HPV and HPS and identified the catabolic genes involved in the first two steps of the pathways. Since SYK-6 catabolizes HPV through 2-pyrone-4,6-dicarboxylate, which is a building block for functional polymers, characterization of HPV catabolism is important not only for understanding the bacterial lignin catabolic system but also for lignin utilization.

In Vitro Enzymatic Depolymerization of Lignin with Release of Syringyl, Guaiacyl, and Tricin Units

New environmentally sound technologies are needed to derive valuable compounds from renewable resources. Lignin, an abundant polymer in terrestrial plants comprised predominantly of guaiacyl and syringyl monoaromatic phenylpropanoid units, is a potential natural source of aromatic compounds. In addition, the plant secondary metabolite tricin is a recently discovered and moderately abundant flavonoid in grasses. The most prevalent interunit linkage between guaiacyl, syringyl, and tricin units is the β-ether linkage. Previous studies have shown that bacterial β-etherase pathway enzymes catalyze glutathione-dependent cleavage of β-ether bonds in dimeric β-ether lignin model compounds. To date, however, it remains unclear whether the known β-etherase enzymes are active on lignin polymers. Here we report on enzymes that catalyze β-ether cleavage from bona fide lignin, under conditions that recycle the cosubstrates NAD+ and glutathione. Guaiacyl, syringyl, and tricin derivatives were identified as reaction products when different model compounds or lignin fractions were used as substrates. These results demonstrate an in vitro enzymatic system that can recycle cosubstrates while releasing aromatic monomers from model compounds as well as natural and engineered lignin oligomers. These findings can improve the ability to produce valuable aromatic compounds from a renewable resource like lignin.IMPORTANCE Many bacteria are predicted to contain enzymes that could convert renewable carbon sources into substitutes for compounds that are derived from petroleum. The β-etherase pathway present in sphingomonad bacteria could cleave the abundant β-O-4-aryl ether bonds in plant lignin, releasing a biobased source of aromatic compounds for the chemical industry. However, the activity of these enzymes on the complex aromatic oligomers found in plant lignin is unknown. Here we demonstrate biodegradation of lignin polymers using a minimal set of β-etherase pathway enzymes, the ability to recycle needed cofactors (glutathione and NAD+) in vitro, and the release of guaiacyl, syringyl, and tricin as depolymerized products from lignin. These observations provide critical evidence for the use and future optimization of these bacterial β-etherase pathway enzymes for industrial-level biotechnological applications designed to derive high-value monomeric aromatic compounds from lignin.

Bacterial catabolism of lignin-derived aromatics: New findings in a recent decade: Update on bacterial lignin catabolism

Lignin is the most abundant phenolic polymer; thus, its decomposition by microorganisms is fundamental to carbon cycling on earth. Lignin breakdown is initiated by depolymerization catalysed by extracellular oxidoreductases secreted by white-rot basidiomycetous fungi. On the other hand, bacteria play a predominant role in the mineralization of lignin-derived heterogeneous low-molecular-weight aromatic compounds. The outline of bacterial catabolic pathways for lignin-derived bi- and monoaryls are typically composed of the following sequential steps: (i) funnelling of a wide variety of lignin-derived aromatics into vanillate and syringate, (ii) O demethylation of vanillate and syringate to form catecholic derivatives and (iii) aromatic ring-cleavage of the catecholic derivatives to produce tricarboxylic acid cycle intermediates. Knowledge regarding bacterial catabolic systems for lignin-derived aromatic compounds is not only important for understanding the terrestrial carbon cycle but also valuable for promoting the shift to a low-carbon economy via biological lignin valorisation. This review summarizes recent progress in bacterial catabolic systems for lignin-derived aromatic compounds, including newly identified catabolic pathways and genes for decomposition of lignin-derived biaryls, transcriptional regulation and substrate uptake systems. Recent omics approaches on catabolism of lignin-derived aromatic compounds are also described.

Berkeley Screen: a set of 96 solutions for general macromolecular crystallization

Using statistical analysis of the Biological Macromolecular Crystallization Database, combined with previous knowledge about crystallization reagents, a crystallization screen called the Berkeley Screen has been created. Correlating crystallization conditions and high-resolution protein structures, it is possible to better understand the influence that a particular solution has on protein crystal formation. Ions and small molecules such as buffers and precipitants used in crystallization experiments were identified in electron density maps, highlighting the role of these chemicals in protein crystal packing. The Berkeley Screen has been extensively used to crystallize target proteins from the Joint BioEnergy Institute and the Collaborative Crystallography program at the Berkeley Center for Structural Biology, contributing to several Protein Data Bank entries and related publications. The Berkeley Screen provides the crystallographic community with an efficient set of solutions for general macromolecular crystallization trials, offering a valuable alternative to the existing commercially available screens.

Profiling microbial lignocellulose degradation and utilization by emergent omics technologies

The use of plant materials to generate renewable biofuels and other high-value chemicals is the sustainable and preferable option, but will require considerable improvements to increase the rate and efficiency of lignocellulose depolymerization. This review highlights novel and emerging technologies that are being developed and deployed to characterize the process of lignocellulose degradation. The review will also illustrate how microbial communities deconstruct and metabolize lignocellulose by identifying the necessary genes and enzyme activities along with the reaction products. These technologies include multi-omic measurements, cell sorting and isolation, nuclear magnetic resonance spectroscopy (NMR), activity-based protein profiling, and direct measurement of enzyme activity. The recalcitrant nature of lignocellulose necessitates the need to characterize the methods microbes employ to deconstruct lignocellulose to inform new strategies on how to greatly improve biofuel conversion processes. New technologies are yielding important insights into microbial functions and strategies employed to degrade lignocellulose, providing a mechanistic blueprint in order to advance biofuel production.