The role of the conserved Trp330 in Flp-mediated recombination. Functional and structural analysis

Dynamics in Cre-loxP site-specific recombination

Cre recombinase is a phage-derived enzyme that has found utility for precise manipulation of DNA sequences. Cre recognizes and recombines pairs of loxP sequences characterized by an inverted repeat and asymmetric spacer. Cre cleaves and religates its DNA targets such that error-prone repair pathways are not required to generate intact DNA products. Major obstacles to broader applications are lack of knowledge of how Cre recognizes its targets, and how its activity is controlled. The picture emerging from high resolution methods is that the dynamic properties of both the enzyme and its DNA target are important determinants of its activity in both sequence recognition and DNA cleavage. Improved understanding of the role of dynamics in the key steps along the pathway of Cre-loxP recombination should significantly advance our ability to both redirect Cre to new sequences and to control its DNA cleavage activity in the test tube and in cells.

Irc20 Regulates the Yeast Endogenous 2-μm Plasmid Levels by Controlling Flp1

The endogenous yeast 2-μm plasmid while innocuous to the host, needs to be properly regulated to avoid a toxic increase in copy number. The plasmid copy number control system is under the control of the plasmid encoded recombinase, Flp1. In case of a drop in 2-μm plasmid levels due to rare plasmid mis-segregation events, the Flp1 recombinase together with the cell’s homologous recombination machinery, produce multiple copies of the 2-μm plasmid that are spooled during DNA replication. The 2-μm plasmid copy number is tightly regulated by controlled expression of Flp1 as well as its ubiquitin and SUMO modification. Here, we identify a novel regulator of the 2-μm plasmid, the ATPase, ubiquitin ligase, Irc20. Irc20 was initially identified as a homologous recombination regulator, and here we uncover a new role for Irc20 in maintaining the 2-μm plasmid copy number and segregation through regulating Flp1 protein levels in the cell.

A DNA structural alphabet provides new insight into DNA flexibility

DNA is a structurally plastic molecule, and its biological function is enabled by adaptation to its binding partners. To identify the DNA structural polymorphisms that are possible in such adaptations, the dinucleotide structures of 60 000 DNA steps from sequentially nonredundant crystal structures were classified and an automated protocol assigning 44 distinct structural (conformational) classes called NtC (for Nucleotide Conformers) was developed. To further facilitate understanding of the DNA structure, the NtC were assembled into the DNA structural alphabet CANA (Conformational Alphabet of Nucleic Acids) and the projection of CANA onto the graphical representation of the molecular structure was proposed. The NtC classification was used to define a validation score called confal, which quantifies the conformity between an analyzed structure and the geometries of NtC. NtC and CANA assignment were applied to analyze the structural properties of typical DNA structures such as Dickerson-Drew dodecamers, guanine quadruplexes and structural models based on fibre diffraction. NtC, CANA and confal assignment, which is accessible at the website https://dnatco.org, allows the quantitative assessment and validation of DNA structures and their subsequent analysis by means of pseudo-sequence alignment. An animated Interactive 3D Complement (I3DC) is available in Proteopedia at http://proteopedia.org/w/Journal:Acta_Cryst_D:2.

Expression of Flp Protein in a Baculovirus/Insect Cell System for Biotechnological Applications

The Saccharomyces cerevisiae Flp protein is a site-specific recombinase that recognizes and binds to the Flp recognition target (FRT) site, a specific sequence comprised of at least two inverted repeats separated by a spacer. Binding of four monomers of Flp is required to mediate recombination between two FRT sites. Because of its site-specific cleavage characteristics, Flp has been established as a genome engineering tool. Amongst others, Flp is used to direct insertion of genes of interest into eukaryotic cells based on single and double FRT sites. A Flp-encoding plasmid is thereby typically cotransfected with an FRT-harboring donor plasmid. Moreover, Flp can be used to excise DNA sequences that are flanked by FRT sites. Therefore, the aim of this study was to determine whether Flp protein and its step-arrest mutant, FlpH305L, recombinantly expressed in insect cells, can be used for biotechnological applications. Using a baculovirus system, the proteins were expressed as C-terminally 3 × FLAG-tagged proteins and were purified by anti-FLAG affinity selection. As demonstrated by electrophoretic mobility shift assays (EMSAs), purified Flp and FlpH305L bind to FRT-containing DNA. Furthermore, using a cell assay, purified Flp was shown to be active in recombination and to mediate efficient insertion of a donor plasmid into the genome of target cells. Thus, these proteins can be used for applications such as DNA-binding assays, in vitro recombination, or genome engineering.

Cre Recombinase and Other Tyrosine Recombinases

Tyrosine-type site-specific recombinases (T-SSRs) have opened new avenues for the predictable modification of genomes as they enable precise genome editing in heterologous hosts. These enzymes are ubiquitous in eubacteria, prevalent in archaea and temperate phages, present in certain yeast strains, but barely found in higher eukaryotes. As tools they find increasing use for the generation and systematic modification of genomes in a plethora of organisms. If applied in host organisms, they enable precise DNA cleavage and ligation without the gain or loss of nucleotides. Criteria directing the choice of the most appropriate T-SSR system for genetic engineering include that, whenever possible, the recombinase should act independent of cofactors and that the target sequences should be long enough to be unique in a given genome. This review is focused on recent advancements in our mechanistic understanding of simple T-SSRs and their application in developmental and synthetic biology, as well as in biomedical research.

An Overview of Tyrosine Site-specific Recombination: From an Flp Perspective

Tyrosine site-specific recombinases (YRs) are widely distributed among prokaryotes and their viruses, and were thought to be confined to the budding yeast lineage among eukaryotes. However, YR-harboring retrotransposons (the DIRS and PAT families) and DNA transposons (Cryptons) have been identified in a variety of eukaryotes. The YRs utilize a common chemical mechanism, analogous to that of type IB topoisomerases, to bring about a plethora of genetic rearrangements with important physiological consequences in their respective biological contexts. A subset of the tyrosine recombinases has provided model systems for analyzing the chemical mechanisms and conformational features of the recombination reaction using chemical, biochemical, topological, structural, and single molecule-biophysical approaches. YRs with simple reaction requirements have been utilized to bring about programmed DNA rearrangements for addressing fundamental questions in developmental biology. They have also been employed to trace the topological features of DNA within high-order DNA interactions established by protein machines. The directed evolution of altered specificity YRs, combined with their spatially and temporally regulated expression, heralds their emergence as vital tools in genome engineering projects with wide-ranging biotechnological and medical applications.

The λ Integrase Site-specific Recombination Pathway

The site-specific recombinase encoded by bacteriophage λ (Int) is responsible for integrating and excising the viral chromosome into and out of the chromosome of its Escherichia coli host. Int carries out a reaction that is highly directional, tightly regulated, and depends upon an ensemble of accessory DNA bending proteins acting on 240 bp of DNA encoding 16 protein binding sites. This additional complexity enables two pathways, integrative and excisive recombination, whose opposite, and effectively irreversible, directions are dictated by different physiological and environmental signals. Int recombinase is a heterobivalent DNA binding protein and each of the four Int protomers, within a multiprotein 400 kDa recombinogenic complex, is thought to bind and, with the aid of DNA bending proteins, bridge one arm- and one core-type DNA site. In the 12 years since the publication of the last review focused solely on the λ site-specific recombination pathway in Mobile DNA II, there has been a great deal of progress in elucidating the molecular details of this pathway. The most dramatic advances in our understanding of the reaction have been in the area of X-ray crystallography where protein-DNA structures have now been determined for of all of the DNA-protein interfaces driving the Int pathway. Building on this foundation of structures, it has been possible to derive models for the assembly of components that determine the regulatory apparatus in the P-arm, and for the overall architectures that define excisive and integrative recombinogenic complexes. The most fundamental additional mechanistic insights derive from the application of hexapeptide inhibitors and single molecule kinetics.

Cre Recombinase

The use of Cre recombinase to carry out conditional mutagenesis of transgenes and insert DNA cassettes into eukaryotic chromosomes is widespread. In addition to the numerous in vivo and in vitro applications that have been reported since Cre was first shown to function in yeast and mammalian cells nearly 30 years ago, the Cre-loxP system has also played an important role in understanding the mechanism of recombination by the tyrosine recombinase family of site-specific recombinases. The simplicity of this system, requiring only a single recombinase enzyme and short recombination sequences for robust activity in a variety of contexts, has been an important factor in both cases. This review discusses advances in the Cre recombinase field that have occurred over the past 12 years since the publication of Mobile DNA II. The focus is on those recent contributions that have provided new mechanistic insights into the reaction. Also discussed are modifications of Cre and/or the loxP sequence that have led to improvements in genome engineering applications.

Hairpin Telomere Resolvases

Covalently closed hairpin ends, also known as hairpin telomeres, provide an unusual solution to the end replication problem. The hairpin telomeres are generated from replication intermediates by a process known as telomere resolution. This is a DNA breakage and reunion reaction promoted by hairpin telomere resolvases (also referred to as protelomerases) found in a limited number of phage and bacteria. The reaction promoted by these enzymes is a chemically isoenergetic two-step transesterification without a requirement for divalent metal ions or high-energy cofactors and uses an active site and mechanism similar to that for type IB topoisomerases and tyrosine recombinases. The small number of unrelated telomere resolvases characterized to date all contain a central, catalytic core domain with the active site, but in addition carry variable C- and N-terminal domains with different functions. Similarities and differences in the structure and function of the telomere resolvases are discussed. Of particular interest are the properties of the Borrelia telomere resolvases, which have been studied most extensively at the biochemical level and appear to play a role in shaping the unusual segmented genomes in these organisms and, perhaps, to play a role in recombinational events.

The partitioning and copy number control systems of the selfish yeast plasmid: an optimized molecular design for stable persistence in host cells

The multi-copy 2 micron plasmid of Saccharomyces cerevisiae, a resident of the nucleus, is remarkable for its high chromosome-like stability. The plasmid does not appear to contribute to the fitness of the host, nor does it impose a significant metabolic burden on the host at its steady state copy number. The plasmid may be viewed as a highly optimized selfish DNA element whose genome design is devoted entirely towards efficient replication, equal segregation and copy number maintenance. A partitioning system comprised of two plasmid coded proteins, Rep1 and Rep2, and a partitioning locus STB is responsible for equal or nearly equal segregation of plasmid molecules to mother and daughter cells. Current evidence supports a model in which the Rep-STB system promotes the physical association of the plasmid with chromosomes and thus plasmid segregation by a hitchhiking mechanism. The Flp site-specific recombination system housed by the plasmid plays a critical role in maintaining steady state plasmid copy number. A decrease in plasmid population due to rare missegregation events is rectified by plasmid amplification via a recombination induced rolling circle replication mechanism. Appropriate plasmid amplification, without runaway increase in copy number, is ensured by positive and negative regulation of FLP gene expression by plasmid coded proteins and by the control of Flp level/activity through host mediated post-translational modification(s) of Flp. The Flp system has been successfully utilized to understand mechanisms of site-specific recombination, to bring about directed genetic alterations for addressing fundamental problems in biology, and as a tool in biotechnological applications.

Single molecule TPM analysis of the catalytic pentad mutants of Cre and Flp site-specific recombinases: contributions of the pentad residues to the pre-chemical steps of recombination

Cre and Flp site-specific recombinase variants harboring point mutations at their conserved catalytic pentad positions were characterized using single molecule tethered particle motion (TPM) analysis. The findings reveal contributions of these amino acids to the pre-chemical steps of recombination. They suggest functional differences between positionally conserved residues in how they influence recombinase-target site association and formation of ‘non-productive’, ‘pre-synaptic’ and ‘synaptic’ complexes. The most striking difference between the two systems is noted for the single conserved lysine. The pentad residues in Cre enhance commitment to recombination by kinetically favoring the formation of pre-synaptic complexes. These residues in Flp serve a similar function by promoting Flp binding to target sites, reducing non-productive binding and/or enhancing the rate of assembly of synaptic complexes. Kinetic comparisons between Cre and Flp, and between their derivatives lacking the tyrosine nucleophile, are consistent with a stronger commitment to recombination in the Flp system. The effect of target site orientation (head-to-head or head-to-tail) on the TPM behavior of synapsed DNA molecules supports the selection of anti-parallel target site alignment prior to the chemical steps. The integrity of the synapse, whose establishment/stability is fostered by strand cleavage in the case of Flp but not Cre, appears to be compromised by the pentad mutations.

Topoisomerases and site-specific recombinases: similarities in structure and mechanism

The processes of DNA topoisomerization and site-specific recombination are fundamentally similar: DNA cleavage by forming a phospho-protein covalent linkage, DNA topological rearrangement, and DNA ligation coupled with protein regeneration. Type IB DNA topoisomerases are structurally and mechanistically homologous to tyrosine recombinases. Both enzymes nick DNA double helices independent of metal ions, form 3'-phosphotyrosine intermediates, and rearrange the free 5' ends relative to the uncut strands by swiveling. In contrast, serine recombinases generate 5'-phospho-serine intermediates. A 180° relative rotation of the two halves of a 100 kDa terameric serine recombinase and DNA complex has been proposed as the mechanism of strand exchange. Here I propose an alternative mechanism. Interestingly, the catalytic domain of serine recombinases has structural similarity to the TOPRIM domain, conserved among all Type IA and Type II topoisomerases and responsible for metal binding and DNA cleavage. TOPRIM topoisomerases also cleave DNA to generate 5'-phosphate and 3'-OH groups. Based on the existing biochemical data and crystal structures of topoisomerase II and serine recombinases bound to pre- and post-cleavage DNA, I suggest a strand passage mechanism for DNA recombination by serine recombinases. This mechanism is reminiscent of DNA topoisomerization and does not require subunit rotation.

High efficiency of a sequential recombinase-mediated cassette exchange reaction in Escherichia coli

A comparison between the efficiency of recombinase-mediated cassette exchange (RMCE) reactions catalyzed in Escherichia coli by the site-specific recombinases Flp of yeast and Int of coliphage HK022 has revealed that an Flp-catalyzed RMCE reaction is more efficient than an Int-HK022 catalyzed reaction. In contrast, an RMCE reaction with 1 pair of frt sites and 1 pair of att sites catalyzed in the presence of both recombinases is very inefficient. However, the same reaction catalyzed by each recombinase individually supplied in a sequential order is very efficient, regardless of the order. Atomic force microscopy images of Flp with its DNA substrates show that only 1 pair of recombination sites forms a synaptic complex with the recombinase. The results suggest that the RMCE reaction is sequential.

Requirements for catalysis in the Cre recombinase active site

Members of the tyrosine recombinase (YR) family of site-specific recombinases catalyze DNA rearrangements using phosphoryl transfer chemistry that is identical to that used by the type IB topoisomerases (TopIBs). To better understand the requirements for YR catalysis and the relationship between the YRs and the TopIBs, we have analyzed the in vivo and in vitro recombination activities of all substitutions of the seven active site residues in Cre recombinase. We have also determined the structure of a vanadate transition state mimic for the Cre-loxP reaction that facilitates interpretation of mutant activities and allows for a comparison with similar structures from the related topoisomerases. We find that active site residues shared by the TopIBs are most sensitive to substitution. Only two, the tyrosine nucleophile and a conserved lysine residue that activates the 5'-hydroxyl leaving group, are strictly required to achieve >5% of wild-type activity. The two conserved arginine residues each tolerate one substitution that results in modest recombination activity and the remaining three active site positions can be substituted with several alternative amino acids while retaining a significant amount of activity. The results are discussed in the context of YR and TopIB structural models and data from related YR systems.

Electrostatic suppression allows tyrosine site-specific recombination in the absence of a conserved catalytic arginine

The active site of the tyrosine family site-specific recombinase Flp contains a conserved catalytic pentad that includes two arginine residues, Arg-191 and Arg-308. Both arginines are essential for the transesterification steps of strand cleavage and strand joining in DNA substrates containing a phosphate group at the scissile position. During strand cleavage, the active site tyrosine supplies the nucleophile to form a covalent 3'-phosphotyrosyl intermediate. The 5'-hydroxyl group produced by cleavage provides the nucleophile to re-form a 3'-5' phosphodiester bond in a recombinant DNA strand. In previous work we showed that substitution of the scissile phosphate (P) by the charge neutral methylphosphonate (MeP) makes Arg-308 dispensable during the catalytic activation of the MeP diester bond. However, in the Flp(R308A) reaction, water out-competes the tyrosine nucleophile (Tyr-343) to cause direct hydrolysis of the MeP diester bond. We now report that for MeP activation Arg-191 is also not required. In contrast to Flp(R308A), Flp(R191A) primarily mediates normal cleavage by Tyr-343 but also exhibits a weaker direct hydrolytic activity. The cleaved MeP-tyrosyl intermediate formed by Flp(R191A) can be targeted for nucleophilic attack by a 5'-hydroxyl or water and channeled toward strand joining or hydrolysis, respectively. In collaboration with wild type Flp, Flp(R191A) promotes strand exchange between MeP- and P-DNA partners. Loss of a catalytically crucial positively charged side chain can thus be suppressed by a compensatory modification in the DNA substrate that neutralizes the negative charge on the scissile phosphate.

Reactions of Cre with methylphosphonate DNA: similarities and contrasts with Flp and vaccinia topoisomerase

BACKGROUND

Reactions of vaccinia topoisomerase and the tyrosine site-specific recombinase Flp with methylphosphonate (MeP) substituted DNA substrates, have provided important insights into the electrostatic features of the strand cleavage and strand joining steps catalyzed by them. A conserved arginine residue in the catalytic pentad, Arg-223 in topoisomerase and Arg-308 in Flp, is not essential for stabilizing the MeP transition state. Topoisomerase or its R223A variant promotes cleavage of the MeP bond by the active site nucleophile Tyr-274, followed by the rapid hydrolysis of the MeP-tyrosyl intermediate. Flp(R308A), but not wild type Flp, mediates direct hydrolysis of the activated MeP bond. These findings are consistent with a potential role for phosphate electrostatics and active site electrostatics in protecting DNA relaxation and site-specific recombination, respectively, against abortive hydrolysis.

METHODOLOGY/PRINCIPAL FINDINGS

We have examined the effects of DNA containing MeP substitution in the Flp related Cre recombination system. Neutralizing the negative charge at the scissile position does not render the tyrosyl intermediate formed by Cre susceptible to rapid hydrolysis. Furthermore, combining the active site R292A mutation in Cre (equivalent to the R223A and R308A mutations in topoisomerase and Flp, respectively) with MeP substitution does not lead to direct hydrolysis of the scissile MeP bond in DNA. Whereas Cre follows the topoisomerase paradigm during the strand cleavage step, it follows the Flp paradigm during the strand joining step.

CONCLUSIONS/SIGNIFICANCE

Collectively, the Cre, Flp and topoisomerase results highlight the contribution of conserved electrostatic complementarity between substrate and active site towards transition state stabilization during site-specific recombination and DNA relaxation. They have potential implications for how transesterification reactions in nucleic acids are protected against undesirable abortive side reactions. Such protective mechanisms are significant, given the very real threat of hydrolytic genome damage or disruption of RNA processing due to the cellular abundance and nucleophilicity of water.

Active site electrostatics protect genome integrity by blocking abortive hydrolysis during DNA recombination

Water, acting as a rogue nucleophile, can disrupt transesterification steps of important phosphoryl transfer reactions in DNA and RNA. We have unveiled this risk, and identified safeguards instituted against it, during strand cleavage and joining by the tyrosine site-specific recombinase Flp. Strand joining is threatened by a latent Flp endonuclease activity (type I) towards the 3'-phosphotyrosyl intermediate resulting from strand cleavage. This risk is not alleviated by phosphate electrostatics; neutralizing the negative charge on the scissile phosphate through methylphosphonate (MeP) substitution does not stimulate type I endonuclease. Rather, protection derives from the architecture of the recombination synapse and conformational dynamics within it. Strand cleavage is protected against water by active site electrostatics. Replacement of the catalytic Arg-308 of Flp by alanine, along with MeP substitution, elicits a second Flp endonuclease activity (type II) that directly targets the scissile phosphodiester bond in DNA. MeP substitution, combined with appropriate active site mutations, will be useful in revealing anti-hydrolytic mechanisms engendered by systems that mediate DNA relaxation, DNA transposition, site-specific recombination, telomere resolution, RNA splicing and retrohoming of mobile introns.

Binding and catalytic contributions to site recognition by flp recombinase

Flp catalyzes site-specific recombination in a highly sequence-specific manner despite making few direct contacts to the bases within its binding site. Sequence discrimination could take place in the binding and/or the catalytic steps. In this study, we independently measure the binding affinity and initial cleavage rate of Flp recombinase with approximately 20 designed alternate target DNA sequences. Our results show that Flp specificity is largely, although not entirely, imparted at the binding step and is the result of a combination of direct and indirect readout. The Flp binding site includes an A/T-rich region that displays a characteristically narrow minor groove. We find that many A --> T changes are tolerated at the binding step, whereas C or G substitutions tend to decrease binding affinity. The effects of the latter can be alleviated by replacing guanine with inosine, which removes the N2 amino group that protrudes into the minor groove. Some A --> T changes reduce binding affinity, due to clashing with nearby residues, reinforcing that specificity requires avoiding negative contacts as well as creating positive ones. A tracts, which can lead to unusually rigid DNA structure, are tolerated during the binding step when placed within the region where the minor groove is already narrow. However, most A tracts slow catalysis more than C or G substitutions. Understanding what kind of sequence variation is tolerated in the binding and catalytic steps helps us understand how the target DNA is recognized by Flp and will be useful in guiding the design of Flp variants with altered specificities.

Genetic tools for select-agent-compliant manipulation of Burkholderia pseudomallei

Because of Burkholderia pseudomallei's classification as a select agent in the United States, genetic manipulation of this bacterium is strictly regulated. Only a few antibiotic selection markers, including gentamicin, kanamycin, and zeocin, are currently approved for use with this bacterium, but wild-type strains are highly resistant to these antibiotics. To facilitate routine genetic manipulations of wild-type strains, several new tools were developed. A temperature-sensitive pRO1600 broad-host-range replicon was isolated and used to construct curable plasmids where the Flp and Cre recombinase genes are expressed from the rhamnose-regulated Escherichia coli P(BAD) promoter and kanamycin (nptI) and zeocin (ble) selection markers from the constitutive Burkholderia thailandensis ribosomal P(S12) or synthetic bacterial P(EM7) promoter. Flp and Cre site-specific recombination systems allow in vivo excision and recycling of nptII and ble selection markers contained on FRT or loxP cassettes. Finally, expression of Tn7 site-specific transposase from the constitutive P1 integron promoter allowed development of an efficient site-specific chromosomal integration system for B. pseudomallei. In conjunction with a natural transformation method, the utility of these new tools was demonstrated by isolating an unmarked delta(amrRAB-oprA) efflux pump mutant. Exploiting natural transformation, chromosomal DNA fragments carrying this mutation marked with zeocin resistance were transferred between the genomes of two different B. pseudomallei strains. Lastly, the deletion mutation was complemented by a chromosomally integrated mini-Tn7 element carrying the amrAB-oprA operon. The new tools allow routine select-agent-compliant genetic manipulations of B. pseudomallei and other Burkholderia species.

Identification of a potential general acid/base in the reversible phosphoryl transfer reactions catalyzed by tyrosine recombinases: Flp H305

Flp provides a unique opportunity to apply the tools of chemical biology to phosphoryl transfer reactions. Flp and other tyrosine recombinases catalyze site-specific DNA rearrangements via a phosphotyrosine intermediate. Unlike most related enzymes, Flp's nucleophilic tyrosine derives from a different protomer than the remainder of its active site. Because the tyrosine can be supplied exogenously, nonnatural synthetic analogs can be used. Here we examine the catalytic role of Flp's conserved H305. DNA cleavage was studied using a peptide containing either tyrosine (pKa congruent with 10) or 3-fluoro-tyrosine (pKa congruent with 8.4). Religation was studied using DNA substrates with 3'-phospho-cresol (pKa congruent with 10) or 3'-para-nitro-phenol (pKa congruent with 7.1). In both cases, the tyrosine analog with the lower pKa specifically restored the activity of an H305 mutant. These results provide experimental evidence that this conserved histidine functions as a general acid/base catalyst in tyrosine recombinases.

Characterization of a conjugative transposon integrase, IntDOT

Sequence analysis revealed that the integrase of the Bacteroides conjugative transposon CTnDOT (IntDOT) might be a member of the tyrosine recombinase family because IntDOT has five of six highly conserved residues found in the catalytic domains of tyrosine recombinases. Yet, IntDOT catalyses a reaction that appears to differ in some respects from well-studied tyrosine recombinases such as that of phage lambda. To assess the importance of the conserved residues, we changed residues in IntDOT that align with conserved residues in tyrosine recombinases. Some substitutions resulted in a complete loss or significant decrease of integration activity in vivo. The ability of the mutant proteins to cleave and ligate CTnDOT attachment site (attDOT) DNA in vitro in general paralleled the in vivo results, but the H345A mutant, which had a wild-type level of integration in vivo, exhibited a slightly lower level of cleavage and ligation in vitro. Our results confirm the hypothesis that IntDOT belongs to the tyrosine recombinase family, but the catalytic core of the protein seems to have somewhat different organization. Previous DNA sequence analyses showed that CTnDOT att sites contain 5 bp non-homologous coupling sequences which were assumed to define the putative staggered sites of cleavage. However, cleavage assays showed that one of the cleavage sites is 2 bp away from the junction of CTnDOT and coupling sequence DNA. The site is in a region of homology that is conserved in CTnDOT att sites.

Unveiling hidden catalytic contributions of the conserved His/Trp-III in tyrosine recombinases: assembly of a novel active site in Flp recombinase harboring alanine at this position

The catalytic pentad of tyrosine recombinases, that assists the tyrosine nucleophile, includes a conserved histidine/tryptophan (His/Trp-III). Flp and Cre harbor tryptophan at this position; most of their kin recombinases display histidine. Contrary to the conservation rule, Flp(W330F) is a much stronger recombinase than Flp(W330H). The hydrophobicity of Trp330 or Phe330 is utilized in correctly positioning Tyr343 during the strand cleavage step of recombination. Why then is phenylalanine almost never encountered in the recombinase family at this conserved position? Using exogenous nucleophiles and synthetic methylphosphonate or 5'-thiolate substrates, we decipher that Trp330 also assists in the activation of the scissile phosphate and the departure of the 5'-hydroxyl leaving group. These two functions are consistent with the hydrogen bonding property of Trp330 as well as its location in structures of the Flp recombination complexes. However, van der Waals contact between Trp330 and Arg308 may also be important for the phosphate activation step. A structure based suppression strategy permits the inactive variant Flp(W330A) to be rescued by a second site mutation A339M. Modeling alanine and methionine at positions 330 and 339, respectively, in the Flp crystal structure suggests a plausible mechanism for active site restoration. Successful suppression suggests the possibility of evolving, by design, new active site configurations for tyrosine recombination.

Mechanisms of site-specific recombination

Integration, excision, and inversion of defined DNA segments commonly occur through site-specific recombination, a process of DNA breakage and reunion that requires no DNA synthesis or high-energy cofactor. Virtually all identified site-specific recombinases fall into one of just two families, the tyrosine recombinases and the serine recombinases, named after the amino acid residue that forms a covalent protein-DNA linkage in the reaction intermediate. Their recombination mechanisms are distinctly different. Tyrosine recombinases break and rejoin single strands in pairs to form a Holliday junction intermediate. By contrast, serine recombinases cut all strands in advance of strand exchange and religation. Many natural systems of site-specific recombination impose sophisticated regulatory mechanisms on the basic recombinational process to favor one particular outcome of recombination over another (for example, excision over inversion or deletion). Details of the site-specific recombination processes have been revealed by recent structural and biochemical studies of members of both families.

Characterization of the integrase of NBU1, a Bacteroides mobilizable transposon

NBU1 is a Bacteroides mobilizable transposon (MTn) that is integrated within the host chromosome and requires CTnDOT functions for its excision and transfer into a new host. The NBU1 integrase IntN1 has been classified as a tyrosine recombinase based on the presence of conserved residues. We created alanine mutants of the residues R291, K314, H393, R396, H419 and the conserved substitution Y429F and tested them for integration efficiency. The results suggest that these residues in IntN1 are important for integration, and Y429 could be the catalytic nucleophile. We employed suicide substrates and partially purified IntN1 to determine the positions of IntN1 cleavage within the 14 bp common core region that is identical in both NBU1 att sites. We show that IntN1 makes 7 bp staggered cuts on the top and bottom strands. From previous mutational analysis of the att sites, we show that two specific mutations near the site of bottom strand cleavage within this 7 bp region increased integration, and mutations of the two bases near top strand cleavage site had no effect on integration. These results indicate that IntN1 lacks the strict requirement for homology between the recombining sites seen with other tyrosine recombinases. We also show that phosphorothioate substitutions at the cleavage site and 1 bp downstream inhibited cleavage by IntN1. This differs from other studied tyrosine recombinases where inhibition occurs by substitutions at the cleavage site only.

Misregulation of 2 microm circle copy number in a SUMO pathway mutant

Attachment of the ubiquitin-like protein SUMO to other proteins is an essential process in Saccharomyces cerevisiae. However, yeast mutants lacking the SUMO ligases Siz1 and Siz2/Nfi1 are viable, even though they show dramatically reduced levels of SUMO conjugation. This siz1Delta siz2Delta double mutant is cold sensitive and has an unusual phenotype in that it forms irregularly shaped colonies that contain sectors of wild-type-appearing cells as well as sectors of enlarged cells that are arrested in G(2)/M. We have found that these phenotypes result from misregulation of the copy number of the endogenous yeast plasmid, the 2 microm circle. siz1Delta siz2Delta mutants have up to 40-fold-higher levels of 2 microm than do wild-type strains. Furthermore, 2 microm is responsible for the siz1Delta siz2Delta mutant's obvious growth defects, as siz1Delta siz2Delta [cir(0)] strains, which lack 2 microm, are no longer heterogeneous and show growth characteristics similar to those of the wild type. Possible mechanisms for SUMO's effect on 2 microm are suggested by the finding that both Flp1 recombinase and Rep2, two of the four proteins encoded by 2 microm, are covalently modified by SUMO. Our data suggest that SUMO attachment negatively regulates Flp1 levels, which may partially account for the increased 2 microm copy number in the siz1Delta siz2Delta strain.

Catalytic residues of the telomere resolvase ResT: a pattern similar to, but distinct from, tyrosine recombinases and type IB topoisomerases

ResT is a member of the telomere resolvases, a newly discovered class of DNA breakage and reunion enzymes. These enzymes are involved in the formation of co-valently closed hairpin DNA ends that are found in linear prokaryotic chromosomes and plasmids. The hairpins are generated by telomere resolution, where the replicated linear DNA ends are processed by DNA breakage followed by joining of DNA free ends to the complementary strand of the same molecule. Previous studies have shown that ResT catalyzes hairpin formation through a two-step transesterification similar to tyrosine recombinases and type IB topoisomerases. In the present study we have probed the reaction mechanism of ResT. The enzyme was found to efficiently utilize a substrate with a 5'-bridging phosphorothiolate at each cleavage site, similar to tyrosine recombinases/type IB topoisomerases. Using such a substrate to trap the covalent protein-DNA intermediate, coupled with affinity purification and mass spectroscopy, we report a new, non-radioactive approach to directly determine the position of the amino acid in the protein, which is linked to the DNA. We report that tyrosine 335 is the active site nucleophile in ResT, strengthening the link between ResT and tyrosine recombinases/type IB topoisomerases. However, a distinct pattern of catalytic residues with similarities, but distinct differences from the above enzymes was suggested. The differences include the apparent absence of a general acid catalyst, as well as the dispensability of the final histidine in the RKHRHY hexad. Finally, two signature motifs (GRR(2X)E(6X)F and LGH(4-6X)T(3X)Y) near the catalytic residues of aligned telomere resolvases are noted.

Remote phosphate contacts trigger assembly of the active site of DNA topoisomerase IB

Vaccinia topoisomerase IB forms a covalent DNA-(3'-phosphotyrosyl)-enzyme intermediate at its target site 5'-CCCTTp downward arrow in duplex DNA. The contributions of backbone electrostatics and individual phosphate oxygens to the transesterification reaction were probed by introducing 22 single Rp and Sp methylphosphonate diastereomers at 11 positions flanking the cleavage site. Methyl groups at eight positions (four on the scissile strand and four on the nonscissile strand) inhibited the rate of single-turnover cleavage by factors of 50-50,000. Stereospecific interference was observed at several phosphates, thereby distinguishing simple electrostatic contributions from putative specific polar contacts to either the pro-Sp or pro-Rp oxygens. The functionally relevant phosphate oxygens are located on the minor groove face of the helix on which the scissile phosphodiester resides. Our findings, combined with available crystal structures of vaccinia and human topoisomerase IB, show how specific phosphate contacts remote from where chemistry occurs are critical for assembly of the active site.

Mutational analysis of the archaeal tyrosine recombinase SSV1 integrase suggests a mechanism of DNA cleavage in trans

The only tyrosine recombinase so far studied in archaea, the SSV1 integrase, harbors several changes in the canonical residues forming the catalytic pocket of this family of recombinases. This raised the possibility of a different mechanism for archaeal tyrosine recombinase. The residues of Int(SSV) tentatively involved in catalysis were modified by site-directed mutagenesis, and the properties of the corresponding mutants were studied. The results show that all of the targeted residues are important for activity, suggesting that the archaeal integrase uses a mechanism similar to that of bacterial or eukaryotic tyrosine recombinases. In addition, we show that Int(SSV) exhibits a type IB topoisomerase activity because it is able to relax both positive and negative supercoils. Interestingly, in vitro complementation experiments between the inactive integrase mutant Y314F and all other inactive mutants restore in all cases enzymatic activity. This suggests that, as for the yeast Flp recombinase, the active site is assembled by the interaction of the tyrosine from one monomer with the other residues from another monomer. The shared active site paradigm of the eukaryotic Flp protein may therefore be extended to the archaeal tyrosine recombinase Int(SSV).

The role of lysine 532 in the catalytic mechanism of human topoisomerase I

Based on co-crystal structures of human topoisomerase I with bound DNA, Lys(532) makes a minor groove contact with the strongly preferred thymidine residue at the site of covalent attachment (-1 position). Replacement of Lys(532) with either arginine or alanine has essentially no effect on the sequence preference of the enzyme, indicating that this interaction is not required for the preference for a T at the -1 position. Although both the cleavage and religation activities of the K532R mutant enzyme are reduced, cleavage is reduced to a greater extent than religation. The reverse is true for the K532A mutant enzyme with religation so impaired that the nicked intermediate accumulates during plasmid relaxation assays. Consistent with the shift in the cleavage religation equilibrium toward cleavage for the K532A mutant enzyme, expression of the mutant enzyme in Saccharomyces cerevisiae is cytotoxic, and thus this mutant enzyme mimics the effects of the anticancer drug camptothecin. Cleavage assays with the mutant enzymes using an oligonucleotide containing a 5'-bridging phosphorothiolate indicate that Lys(532) functions as a general acid during cleavage to protonate the leaving 5'-oxygen. It is possible that the contact with the -1 base is important during catalysis to provide positional rigidity to the active site. The corresponding residues in the vaccinia virus topoisomerase and the tyrosine recombinases may have similar critical roles in catalysis.

The Flp double cross system a simple efficient procedure for cloning DNA fragments

BACKGROUND

While conventional cloning methods using restriction enzymes and polynucleotide ligase are adequate for most DNAs, fragments made by the polymerase chain reaction are difficult to clone because the amplifying DNA polymerase tends to add untemplated nucleotides to the 3'-termini of the amplified strands. Conservative site-specific recombinases offer an efficient alternative to conventional cloning methods.

RESULTS

In this paper I describe the use of the Flp site-specific recombinase for cloning PCR-amplified fragments. A DNA fragment is amplified with primers that contain at their ends inverted target sequences for Flp. Flp readily recombines these fragments in vitro into a vector that also contains two inverted Flp target sequences surrounding the alpha-complementing region of the lacZ gene of E. coli. The recombinants are conveniently detected as white colonies by the familiar blue/white screening test for lacZ activity. A useful feature of the system is that both orientations of the inserted DNA are usually obtained. If the recipient vector is cut between the two inverted Flp targets, Flp "heals" the double-strand break by inserting a linear fragment flanked by Flp targets.

CONCLUSION

This system ("The Flp Double Cross System") should be useful for cloning multiple PCR fragments into many sites in several vectors. It has certain advantages over other available recombinase-based cloning procedures.