Hydroxylation-induced stabilization of the collagen triple helix. Acetyl-(glycyl-4(R)-hydroxyprolyl-4(R)-hydroxyprolyl)(10)-NH(2) forms a highly stable triple helix

High gastrointestinal digestive stability endows chondroitin sulfate-soluble undenatured type II collagen complex with high activity: Improvement of osteoarthritis in rats

Previously, we prepared a chondroitin sulfate-soluble undenatured type II collagen complex (CS-SC II) with low salt content. This paper further explored the differences between CS-SC II and SC II in terms of gastrointestinal digestive characteristics and osteoarthritis (OA) improvement. In vitro and in vivo experiments showed that the gastric digestive stability of CS-SC II was high under both pH 2.0 and pH 3.0, the α1 chain and triple helix structure of type II collagen retained >60 %. However, SC II had high gastric digestive stability only under pH 3.0. Furthermore, intestinal digestion had little effect on α1 chains of CS-SC II and SC II, and distribution experiments showed that they might exert their biological activities in the intestine. CS-SC II had obvious improvement in OA rats at 1.0 mg/kg/d, that is, the joint swelling was significantly reduced and the weight-bearing ratio of the right hind limb was increased to 49 %, which was close to that of 4.0 mg/kg/d SC II. The wear of articular cartilage, Mankin and OARSI scores of rats in CS-SC II group were significantly reduced. The effects of low-dose CS-SC II on the proportion of regulatory T cells (Treg), mRNA expression of OA key biomarkers (Il6, Ccl7, MMP-3 and MMP13) and signaling pathway genes (NF-κB, AKT or AMPKα) were comparable to those of high-dose SC II. These results showed that CS-SC II might have greater potential to improve OA at a lower dose than SC II due to its high gastrointestinal digestive stability at a wide range of pH conditions.

Physico-chemical properties of functionally adhesive spider silk nanofibres

Currently, synthetic fibre production focuses primarily on high performance materials. For high performance fibrous materials, such as silks, this involves interpreting the structure-function relationship and downsizing to a smaller scale to then harness those properties within synthetic products. Spiders create an array of fibres that range in size from the micrometre to nanometre scale. At about 20 nm diameter spider cribellate silk, the smallest of these silks, is too small to contain any of the typical secondary protein structures of other spider silks, let alone a hierarchical skin-core-type structure. Here, we performed a multitude of investigations to elucidate the structure of cribellate spider silk. These confirmed our hypothesis that, unlike all other types of spider silk, it has a disordered molecular structure. Alanine and glycine, the two amino acids predominantly found in other spider silks, were much less abundant and did not form the usual α-helices and β-sheet secondary structural arrangements. Correspondingly, we characterized the cribellate silk nanofibre to be very compliant. This characterization matches its function as a dry adhesive within the capture threads of cribellate spiders. Our results imply that at extremely small scales there may be a limit reached below which a silk will lose its structural, but not functional, integrity. Nano-sized fibres, such as cribellate silk, thus offer a new opportunity for inspiring the creation of novel scaled-down functional adhesives and nano meta-materials.

Collagen type II-hyaluronan interactions - the effect of proline hydroxylation: a molecular dynamics study

Hyaluronan-collagen composites have been employed in numerous biomedical applications. Understanding the interactions between hyaluronan and collagen is particularly important in the context of joint cartilage function and the treatment of joint diseases. Many factors affect the affinity of collagen for hyaluronan. One of the important factors is the ratio of 3- or 4-hydroxy proline to proline residues. This article presents the results from molecular dynamics calculations of HA-collagen type II interactions with hyaluronan. The applied protocol employed docking and geometry optimization of complexes built using collagen structures with different numbers of hydroxyl groups attached to proline moieties. It was established that the hydroxyproline/proline ratio affects both structural and energetic features of the collagen-hyaluronan complex. Proline hydroxylation was found to significantly influence the number of all identified types of molecular forces, hydrophobic interactions, water bridges and hydrogen bonds, which can be formed between collagen and hyaluronan. Importantly, an increase in the hydroxyproline/proline ratio in the collagen chain increases the binding affinity for hyaluronan. This is illustrated by the linear correlation between the binding free energy and the hydroxylation degree. A comparison of the results obtained for 3 and 4 hydroxylation of proline indicates that the hydroxyl group attachment position plays a minor role in complex stabilization. However, a slightly stronger affinity was observed for 4 hydroxylation. In order to evaluate the effect of the aqueous environment on the collagen-hyaluronan complex stability, the enthalpic and entropic contributions to the free energy of solvation were analyzed.

Lysyl hydroxylase 3-mediated post-translational modifications are required for proper biosynthesis of collagen α1α1α2(IV)

Collagens are the most abundant proteins in the body and among the most biosynthetically complex. A molecular ensemble of over 20 endoplasmic reticulum resident proteins participates in collagen biosynthesis and contributes to heterogeneous post-translational modifications. Pathogenic variants in genes encoding collagens cause connective tissue disorders, including osteogenesis imperfecta, Ehlers-Danlos syndrome, and Gould syndrome (caused by mutations in COL4A1 and COL4A2), and pathogenic variants in genes encoding proteins required for collagen biosynthesis can cause similar but overlapping clinical phenotypes. Notably, pathogenic variants in lysyl hydroxylase 3 (LH3) cause a multisystem connective tissue disorder that exhibits pathophysiological features of collagen-related disorders. LH3 is a multifunctional collagen-modifying enzyme; however, its precise role(s) and substrate specificity during collagen biosynthesis has not been defined. To address this critical gap in knowledge, we generated LH3 KO cells and performed detailed quantitative and molecular analyses of collagen substrates. We found that LH3 deficiency severely impaired secretion of collagen α1α1α2(IV) but not collagens α1α1α2(I) or α1α1α1(III). Amino acid analysis revealed that LH3 is a selective LH for collagen α1α1α2(IV) but a general glucosyltransferase for collagens α1α1α2(IV), α1α1α2(I), and α1α1α1(III). Importantly, we identified rare variants that are predicted to be pathogenic in the gene encoding LH3 in two of 113 fetuses with intracranial hemorrhage-a cardinal feature of Gould syndrome. Collectively, our findings highlight a critical role of LH3 in α1α1α2(IV) biosynthesis and suggest that LH3 pathogenic variants might contribute to Gould syndrome.

Protein solubility, secondary structure and microstructure changes in two types of undenatured type II collagen under different gastrointestinal digestion conditions

Sodium dodecyl sulfonate polyacrylamide gel electrophoresis (SDS-PAGE), circular dichroism spectroscopy (CD), transmission electron microscope (TEM) and atomic force microscope (AFM) were used to analyze the structural properties and gastrointestinal digestive characteristics of natural insoluble undenatured type II collagen (IC II) and pepsin soluble undenatured type II collagen (SC II). Results showed that, after gastric digestion, especially under low pH conditions, some thick and short collagen fibers were dissolved from IC II, which was accompanied by the release of soluble protein with triple helix structure. As to SC II, when gastric digestion was performed under higher pH conditions, collagen fibers were mildly thinned and curved, and the triple helix structure was slightly destroyed. However, those changes hardly occurred during the intestinal digestion. Moreover, the undenatured type II collagen existing in SC II digestive supernatant was 1.2-12.4 times higher than that of IC II depending on the pH conditions. These results suggested that, it is more likely for SC II to exert its activity of relieving arthritis, and it should be taken when the pH of gastric environment is high.

Factors affecting thermal stability of collagen from the aspects of extraction, processing and modification

Abstract

Collagen, as a thermal-sensitive protein, is the most abundant structural protein in animals. Native collagen has been widely applied in various fields due to its specific physicochemical and biological properties. The beneficial properties would disappear with the collapse of the unique triple helical structure during heating. Understanding thermal stability of collagen is of great significance for practical applications. Previous studies have shown the thermal stability would be affected by the different sources, extraction methods, solvent systems in vitro and modified methods. Accordingly, the factors affecting thermal stability of collagen are discussed in detail in this review.

Graphical abstract

RASSF1A controls tissue stiffness and cancer stem-like cells in lung adenocarcinoma

Lung cancer remains the leading cause of cancer-related death due to poor treatment responses and resistance arising from tumour heterogeneity. Here, we show that adverse prognosis associated with epigenetic silencing of the tumour suppressor RASSF1A is due to increased deposition of extracellular matrix (ECM), tumour stiffness and metastatic dissemination in vitro and in vivo. We find that lung cancer cells with RASSF1A promoter methylation display constitutive nuclear YAP1 accumulation and expression of prolyl 4-hydroxylase alpha-2 (P4HA2) which increases collagen deposition. Furthermore, we identify that elevated collagen creates a stiff ECM which in turn triggers cancer stem-like programming and metastatic dissemination in vivo. Re-expression of RASSF1A or inhibition of P4HA2 activity reverses these effects and increases markers of lung differentiation (TTF-1 and Mucin 5B). Our study identifies RASSF1A as a clinical biomarker associated with mechanical properties of ECM which increases the levels of cancer stemness and risk of metastatic progression in lung adenocarcinoma. Moreover, we highlight P4HA2 as a potential target for uncoupling ECM signals that support cancer stemness.

Analysis of bimodal thermally-induced denaturation of type I collagen extracted from calfskin

DSC tracks of collagen in solution revealing a bimodal behaviour during its heat-induced denaturation.

Interstrand dipole-dipole interactions can stabilize the collagen triple helix

The amino acid sequence of collagen is composed of GlyXaaYaa repeats. A prevailing paradigm maintains that stable collagen triple helices form when (2S)-proline (Pro) or Pro derivatives that prefer the C(γ)-endo ring pucker are in the Xaa position and Pro derivatives that prefer the C(γ)-exo ring pucker are in the Yaa position. Anomalously, an amino acid sequence in an invertebrate collagen has (2S,4R)-4-hydroxyproline (Hyp), a C(γ)-exo-puckered Pro derivative, in the Xaa position. In certain contexts, triple helices with Hyp in the Xaa position are now known to be hyperstable. Most intriguingly, the sequence (GlyHypHyp)(n) forms a more stable triple helix than does the sequence (GlyProHyp)(n). Competing theories exist for the physicochemical basis of the hyperstability of (GlyHypHyp)(n) triple helices. By synthesizing and analyzing triple helices with different C(γ)-exo-puckered proline derivatives in the Xaa and Yaa positions, we conclude that interstrand dipole-dipole interactions are the primary determinant of their additional stability. These findings provide a new framework for understanding collagen stability.

Kinetic hysteresis in collagen folding

The triple helix of collagen shows a steep unfolding transition upon heating, whereas less steep and more gradual refolding is observed upon cooling. The shape of the hysteresis loop depends on the rate of temperature change as well as the peptide concentration. Experimental heating and cooling rates are usually much faster than rates of unfolding and refolding. In this work, collagen model peptides were used to study hysteresis quantitatively. Their unfolding and refolding profiles were recorded at different heating and cooling rates, and at different peptide concentrations. Data were fitted assuming kinetic mechanisms in which three chains combine to a helix with or without an intermediate that acts as a nucleus. A quantitative fit was achieved with the same kinetic model for the forward and backward reactions. Transitions of exogenously trimerized collagen models were also analyzed with a simplified kinetic mechanism. It follows that true equilibrium transitions can only be measured at high concentrations of polypeptide chains with slow scanning rates, for example, 0.1 degrees C/h at 0.25 mM peptide concentration of (Gly-Pro-Pro)(10). (Gly-Pro-4(R)Hyp)(10) folds approximately 2000 times faster than (Gly-Pro-Pro)(10). This was explained by a more stable nucleus, whereas the rate of propagation was almost equal. The analysis presented here can be used to derive kinetic and thermodynamic data for collagenous and other systems with kinetically controlled hysteresis.

The aberrance of the 4S diastereomer of 4-hydroxyproline

Prolyl 4-hydroxylases install a hydroxyl group in the 4R configuration on the gamma-carbon atom of certain (2S)-proline (Pro) residues in tropocollagen, elastin, and other proteins to form (2S,4R)-4-hydroxyproline (Hyp). The gauche effect arising from this prevalent post-translational modification enforces a C(gamma)-exo ring pucker and stabilizes the collagen triple helix. The Hyp diastereomer (2S,4S)-4-hydroxyproline (hyp) has not been observed in a protein, despite the ability of electronegative 4S substituents to enforce the more common C(gamma)-endo ring pucker of Pro. Here, we use density functional theory, spectroscopy, crystallography, and calorimetry to explore the consequences of hyp incorporation on protein stability using a collagen model system. We find that the 4S-hydroxylation of Pro to form hyp does indeed enforce a C(gamma)-endo ring pucker but a transannular hydrogen bond between the hydroxyl moiety and the carbonyl of hyp distorts the main-chain torsion angles that typically accompany a C(gamma)-endo ring pucker. This same transannular hydrogen bond enhances an n-->pi* interaction that stabilizes the trans conformation of the peptide bond preceding hyp, endowing hyp with the unusual combination of a C(gamma)-endo ring pucker and high trans/cis ratio. O-Methylation of hyp to form (2S,4S)-4-methoxyproline (mop) eliminates the transannular hydrogen bond and restores a prototypical C(gamma)-endo pucker. mop residues endow the collagen triple helix with much more conformational stability than do hyp residues. These findings highlight the critical importance of the configuration of the hydroxyl group installed on C(gamma) of proline residues.

Conformational selection and collagenolysis in type III collagen

Matrix metalloproteases (MMPs) cleave native collagen at a single site despite the fact that collagen contains more than one scissile bond that can, in principle, be cleaved. For peptide bond hydrolysis to occur at one specific site, MMPs must (1) localize to a region near the unique scissile bond, (2) bind residues at the catalytic site that form the scissile bond, and (3) hydrolyze the corresponding peptide bond. Prior studies suggest that for some types of collagen, binding of noncatalytic MMP domains to amino acid sequences in the vicinity of the true cleavage site facilitates the localization of collagenases. In the present study, our goal was to determine whether binding to the catalytic site also plays a role in determining MMP specificity. To investigate this, we computed the conformational free energy landscape of Type III collagen at each potential cleavage site. The free energy profiles suggest that although all potential cleavage sites sample unfolded states at relatively low temperatures, the true cleavage site samples structures that are complementary to the catalytic site. By contrast, potential cleavage sites that are not cleaved sample states that are relatively incompatible with the MMP active site. Furthermore, our findings point to a specific role for arginine residues in modulating the structural stability of collagen near the collagenase cleavage site. These data imply that locally unfolded potential cleavage sites in Type III collagen sample distinct unfolded ensembles, and that the region about the true collagenase cleavage site samples states that are most complementary to the MMP active site.

Two crystal modifications of (Pro-Pro-Gly)4-Hyp-Hyp-Gly-(Pro-Pro-Gly)4reveal the puckering preference of Hyp(X) in the Hyp(X):Hyp(Y) and Hyp(X):Pro(Y) stacking pairs in collagen helices

Two crystal modifications of a collagen model peptide, (Pro-Pro-Gly)4-Hyp-Hyp-Gly-(Pro-Pro-Gly)4[where Hyp is (4R,2S)-L-hydroxyproline], showed very similar unit-cell parameters and belonged to the same space groupP21. Both crystals exhibited pseudo-merohedral twinning. The main difference was in their molecular-packing arrangements. One modification showed pseudo-hexagonal packing, while the other showed pseudo-tetragonal packing. Despite their different packing arrangements, no significant differences were observed in the hydration states of these modifications. The peptide in the pseudo-tetragonal crystal showed a cyclic fluctuation of helical twists with a period of 20 Å, while that in the pseudo-hexagonal crystal did not. In these modifications, the puckering conformations of four of the 12 Hyp residues at theXposition of the Hyp(X)-Hyp(Y)-Gly sequence were in the opposite conformations to the previous hypothesis that Hyp(X) residues involved in Hyp(X):Hyp(Y) and Hyp(X):Pro(Y) stacking pairs prefer up-puckering and down-puckering conformations, respectively. Detailed investigation of the molecular interactions between Hyp(X) and adjacent molecules revealed that these opposite conformations appeared because the puckering conformation, which follows the hypothesis, is subject to steric hindrance from the adjacent molecule.

Role of side chains in collagen triple helix stabilization and partner recognition

Collagen is a widespread protein family involved in a variety of biological processes. The complexity of collagen and its fibrous nature prevent detailed investigations on the full-length protein. Reductionist approaches conducted by dissecting the protein complexity through the use of model peptides have proved to be quite effective. There are, however, several issues regarding structure-stability relationships, aggregation in higher-order assemblies, and partner recognition that are still extensively investigated. In this review, we discuss the role that side chains play in triple helix stabilization and in partner recognition. On the basis of recent literature data, we show that collagen triple helix stability is the result of the interplay of different factors. As a general trend, interactions established by amino/imino acid side chains within the triple helix scaffold effectively modulate the intrinsic residue propensity for this common structural motif. The use of peptide models has also highlighted the role that side chains play in collagen self-association and in its interactions with receptors. Valuable examples in these fields are illustrated. Finally, future actions required to obtain more detailed information on the structure and the function of this complex protein are also delineated.

Effect of the -Gly-3(S)-hydroxyprolyl-4(R)-hydroxyprolyl- tripeptide unit on the stability of collagen model peptides

In order to evaluate the role of 3(S)-hydroxyproline [3(S)-Hyp] in the triple-helical structure, we produced a series of model peptides with nine tripeptide units including 0-9 3(S)-hydroxyproline residues. The sequences are H-(Gly-Pro-4(R)Hyp)(l)-(Gly-3(S)Hyp-4(R)Hyp)(m)-(Gly-Pro-4(R)Hyp)(n)-OH, where (l, m, n) = (9, 0, 0), (4, 1, 4), (3, 2, 4), (3, 3, 3), (1, 7, 1) and (0, 9, 0). All peptides showed triple-helical CD spectra at room temperature and thermal transition curves. Sedimentation equilibrium analysis showed that peptide H-(Gly-3(S)Hyp-4(R)Hyp)(9)-OH is a trimer. Differential scanning calorimetry showed that replacement of Pro residues with 3(S)Hyp residues decreased the transition enthalpy, and the transition temperature increases by 4.5 degrees C from 52.0 degrees C for the peptide with no 3(S)Hyp residues to 56.5 degrees C for the peptide with nine 3(S)Hyp residues. The refolding kinetics of peptides H-(Gly-3(S)Hyp-4(R)Hyp)(9)-OH, H-(Gly-Pro-4(R)Hyp)(9)-OH and H-(Gly-4(R)Hyp-4(R)Hyp)(9)-OH were compared, and the apparent reaction orders of refolding at 10 degrees C were n = 1.5, 1.3 and 1.2, respectively. Replacement of Pro with 3(S)Hyp or 4(R)Hyp has little effect on the refolding kinetics. This result suggests that the refolding kinetics of collagen model peptides are influenced mainly by the residue in the Yaa position of the -Gly-Xaa-Yaa- repeated sequence. The experiments indicate that replacement of a Pro residue by a 3(S)Hyp residue in the Xaa position of the -Gly-Xaa-4(R)Hyp- repeat of collagen model peptides increases the stability, mainly due to entropic factors.

Collagen structure and stability

Collagen is the most abundant protein in animals. This fibrous, structural protein comprises a right-handed bundle of three parallel, left-handed polyproline II-type helices. Much progress has been made in elucidating the structure of collagen triple helices and the physicochemical basis for their stability. New evidence demonstrates that stereoelectronic effects and preorganization play a key role in that stability. The fibrillar structure of type I collagen-the prototypical collagen fibril-has been revealed in detail. Artificial collagen fibrils that display some properties of natural collagen fibrils are now accessible using chemical synthesis and self-assembly. A rapidly emerging understanding of the mechanical and structural properties of native collagen fibrils will guide further development of artificial collagenous materials for biomedicine and nanotechnology.

4-chloroprolines: synthesis, conformational analysis, and effect on the collagen triple helix

Collagen is an abundant, triple-helical protein comprising three strands of the repeating sequence: Xaa-Yaa-Gly. (2S)-Proline and (2S,4R)-4-hydroxyproline (Hyp) are common in the primary structure of collagen. Here, we use nonnatural proline derivatives to reveal determinants of collagen stability. Specifically, we report high-yielding syntheses of (2S,4S)-4-chloroproline (clp) and (2S,4R)-4-chloroproline (Clp). We find that the molecular structure of Ac-Clp-OMe in the solid state is virtually identical to that of Ac-Hyp-OMe. In contrast, the conformational properties of Ac-clp-OMe are similar to those of Ac-Pro-OMe. Ac-Clp-OMe has a stronger preference for a trans amide bond than does Ac-Pro-OMe, whereas Ac-clp-OMe has a weaker preference. (Pro-Clp-Gly)(10) forms triple helices that are significantly more stable than those of (Pro-Pro-Gly)(10). Triple helices of (clp-Pro-Gly)(10) have stability similar to those of (Pro-Pro-Gly)(10). Unlike (Pro-Clp-Gly)(10) and (clp-Pro-Gly)(10), (clp-Clp-Gly)(10) does not form a stable triple helix, presumably due to a deleterious steric interaction between proximal chlorines on different strands. These data, which are consistent with previous work on 4-fluoroprolines and 4-methylprolines, support the importance of stereoelectronic and steric effects in the stability of the collagen triple helix and provide another means to modulate that stability. (

Contribution of dipole-dipole interactions to the stability of the collagen triple helix

Unveiling sequence-stability and structure-stability relationships is a major goal of protein chemistry and structural biology. Despite the enormous efforts devoted, answers to these issues remain elusive. In principle, collagen represents an ideal system for such investigations due to its simplified sequence and regular structure. However, the definition of the molecular basis of collagen triple helix stability has hitherto proved to be a difficult task. Particularly puzzling is the decoding of the mechanism of triple helix stabilization/destabilization induced by imino acids. Although the propensity-based model, which correlates the propensities of the individual imino acids with the structural requirements of the triple helix, is able to explicate most of the experimental data, it is unable to predict the rather high stability of peptides embedding Gly-Hyp-Hyp triplets. Starting from the available X-ray structures of this polypeptide, we carried out an extensive quantum chemistry analysis of the mutual interactions established by hydroxyproline residues located at the X and Y positions of the Gly-X-Y motif. Our data clearly indicate that the opposing rings of these residues establish significant van der Waals and dipole-dipole interactions that play an important role in triple helix stabilization. These findings suggest that triple helix stabilization can be achieved by distinct structural mechanisms. The interplay of these subtle but recurrent effects dictates the overall stability of this widespread structural motif.

Collagen models as a probe in the decay of works of art: synthesis, conformation and immunological studies

Proteinaceous substances such as collagen, casein and albumin have been widely used as binding media in a variety of works of art. Damages of these 'sensitive' materials, mainly caused of the influence of the environment, are responsible for the overall decay of works of art, and their identification is essential to understand ancient technologies, determine the extent of deterioration and help in future restoration and preservation processes. The most commonly used techniques for the identification of proteinaceous binding media are staining techniques, chromatography, spectrometry and immunological methods, although for the latter no systematic studies have been carried out until now. Aiming at contributing to the development of a reliable and reproducible immunoassay for the evaluation of the collagen-based decay of works of art, sequential polypeptides (Pro-X-Gly)n where X represents amino acid residues Val, Lys, Glu and (Hyp-Val-Gly)n were prepared as models of collagen fragments derived from artificially and naturally aged animal collagens. Conformational studies of the polypeptides by CD revealed the occurrence of polyproline II-like structures comparable with those of collagen. Polypeptides and collagen I were administered to animals, and the induced antibodies were used for the immunochemical detection and differentiation of collagen and collagen fragments. The combined application of (i) anti-collagen antibodies, which strongly interact with native collagen, but poorly recognized by artificially aged collagen and (ii) anti-polypeptide antibodies, which do not associate with native collagen, but are strongly recognized by collagen fragments in naturally or artificially aged collagen, is a valuable tool in determining the extent of decay in works of art.

Conformational Preference and Cis−Trans Isomerization of 4(R)-Substituted Proline Residues

We report here the conformational preference and prolyl cis-trans isomerization of 4(R)-substituted proline dipeptides, N-acetyl-N'-methylamides of 4(R)-hydroxy-L-proline and 4(R)-fluoro-L-proline (Ac-Hyp-NHMe and Ac-Flp-NHMe, respectively), studied at the HF/6-31+G(d), B3LYP/6-31+G(d), and B3LYP/6-311++G(d,p) levels of theory. The 4(R)-substitution by electron-withdrawing groups did not result in significant changes in backbone torsion angles as well as endocyclic torsion angles of the prolyl ring. However, the small changes in backbone torsion angles phi and psi and the decrease of bond lengths r(Cbeta-Cgamma) or r(Cgamma-Cdelta) appear to induce the increase of the relative stability of the trans up-puckered conformation and to alter the relative stabilities of transition states for prolyl cis-trans isomerization. Solvation free energies of local minima and transition states in chloroform and water were calculated using the conductor-like polarizable continuum model at the HF/6-31+G(d) level of theory. The population of trans up-puckered conformations increases in the order Ac-Pro-NHMe < Ac-Hyp-NHMe < Ac-Flp-NHMe in chloroform and water. The increase in population for trans up-puckered conformations in solution is attributed to the increase in population for the polyproline-II-like conformations with up puckering. The barriers DeltaGct++ to prolyl cis-to-trans isomerization for Ac-Hyp-NHMe and Ac-Flp-NHMe increase as the solvent polarity increases, as seen for Ac-Pro-NHMe. In particular, it was identified that the cis-trans isomerization proceeds through the clockwise rotation about the prolyl peptide bond for Ac-Hyp-NHMe and Ac-Flp-NHMe in chloroform and water, as seen for Ac-Pro-NHMe.

The crystal structure of the collagen-like polypeptide (glycyl-4(R)-hydroxyprolyl-4(R)-hydroxyprolyl)9 at 1.55 A resolution shows up-puckering of the proline ring in the Xaa position

The collagen triple helix is characterized by the repeating sequence motif Gly-Xaa-Yaa, where Xaa and Yaa are typically proline and (2S,4R)-4-hydroxyproline (4(R)Hyp), respectively. Previous analyses have revealed that H-(Pro-4(R)Hyp-Gly)(10)-OH forms a stable triple helix, whereas H-(4(R)Hyp-Pro-Gly)(10)-OH does not. Several theories have been put forth to explain the importance of proline puckering and conformation in triple helix formation; however, the details of how they affect triple helix stability are unknown. Underscoring this, we recently demonstrated that the polypeptide Ac-(Gly-4(R)Hyp-4(R)Hyp)(10)-NH(2) forms a triple helix that is more stable than Ac-(Gly-Pro-4(R)Hyp)(10)-NH(2). Here we report crystal the structure of the H-(Gly-4(R)Hyp-4(R)Hyp)(9)-OH peptide at 1.55 A resolution. The puckering of the Yaa position 4(R)Hyp in this structure is up (Cgamma exo), as has been found in other collagen peptide structures. Notably, however, the 4(R)Hyp in the Xaa position also takes the up pucker, which is distinct from all other collagen structures. Regardless of the notable difference in the Xaa proline puckering, our structure still adopts a 7/2 superhelical symmetry similar to that observed in other collagen structures. Thus, the basis for the observed differences in the thermodynamic data of the triple helix<--> coil transition between our peptide and other triple helical peptides likely results from contributions from the unfolded state. Indeed, the unfolded state of the H-(Gly-4(R)Hyp-4(R)Hyp)(9)-OH peptide seems to be stabilized by a preformed polyproline II helix in each strand, which could be explained by the presence of a unique repeating intra-strand water-mediated bridge observed in the H-(Gly-4(R)Hyp-4(R)Hyp)(9)-OH structure, as well as a higher amount of trans peptide bonds.

Triple helical collagen-like peptides: engineering and applications in matrix biology

Collagen, a large insoluble protein with a characteristic triple helical structure, is found as the most prominent component of extracellular matrix. The functions of collagen are not limited to providing mechanical strength to various tissues and organs as a structural protein, as it has been pointed out that collagen exhibits various biological functions through specific interactions with other macromolecules. However, the use of native triple helical collagen is often troublesome because of its insolubility and gelating properties. Instead, triple helical collagen-like peptides have been designed and are used as collagen surrogates in studies on collagen structure, stability, and biological functions including binding to other proteins and cultured cells. This article reviews recent progress in peptide design, synthesis, and the applications of collagen-like peptides in current matrix biology, while emphasizing the advantages of the peptide-based strategy.