A new approach to visualizing the membranous structures of the inner ear - high resolution X-ray micro-tomography

Three-dimensional reconstruction and multiomics analysis reveal a unique pattern of embryogenesis in Ginkgo biloba

Ginkgo (Ginkgo biloba L.) is one of the earliest extant species in seed plant phylogeny. Embryo development patterns can provide fundamental evidence for the origin, evolution, and adaptation of seeds. However, the architectural and morphological dynamics during embryogenesis in G. biloba remain elusive. Herein, we obtained over 2,200 visual slices from 3 stages of embryo development using micro-computed tomography imaging with improved staining methods. Based on 3-dimensional (3D) spatiotemporal pattern analysis, we found that a shoot apical meristem with 7 highly differentiated leaf primordia, including apical and axillary leaf buds, is present in mature Ginkgo embryos. 3D rendering from the front, top, and side views showed 2 separate transport systems of tracheids located in the hypocotyl and cotyledon, representing a unique pattern of embryogenesis. Furthermore, the morphological dynamic analysis of secretory cavities indicated their strong association with cotyledons during development. In addition, we identified genes GbLBD25a (lateral organ boundaries domain 25a), GbCESA2a (cellulose synthase 2a), GbMYB74c (myeloblastosis 74c), GbPIN2 (PIN-FORMED 2) associated with vascular development regulation, and GbWRKY1 (WRKYGOK 1), GbbHLH12a (basic helix-loop-helix 12a), and GbJAZ4 (jasmonate zim-domain 4) potentially involved in the formation of secretory cavities. Moreover, we found that flavonoid accumulation in mature embryos could enhance postgerminative growth and seedling establishment in harsh environments. Our 3D spatial reconstruction technique combined with multiomics analysis opens avenues for investigating developmental architecture and molecular mechanisms during embryogenesis and lays the foundation for evolutionary studies of embryo development and maturation.

A morphometric comparison of the ductus reuniens in humans and guinea pigs, with a note on its evolutionary importance

The mammalian inner ear contains the sensory organs responsible for balance (semicircular canals, utricle, and saccule) and hearing (cochlea). While these organs are functionally distinct, there exists a critical structural connection between the two: the ductus reuniens (DR). Despite its functional importance, comparative descriptions of DR morphology are limited, hindering our understanding of the evolutionary diversification of hearing and balance systems among mammals. Using virtual 3D models derived from micro-CT, we examine the morphology of the DR and its relationship to the bony labyrinth in humans compared to that in a commonly used animal model, the guinea pig. Anatomical reconstructions and univariate measurements were carried out in the software 3D Slicer. Data indicate similarities in DR morphology between humans and guinea pigs in terms of overall shape. However, there are considerable differences in relative DR length and width between humans and guinea pigs. Humans possess a relatively shorter and narrower DR but with wider openings to the saccule and cochlear duct. This results in a relatively more constricted DR lumen in humans which may differentially limit fluid transfer between the saccule and cochlea. Our results reveal previously hidden morphological diversity in the communication between the hearing and balance systems of the mammalian inner ear which may indicate alternative strategies for isolating the Organ of Corti from the peripheral vestibular system throughout mammalian evolution.

First evidence of the link between internal and external structure of the human inner ear otolith system using 3D morphometric modeling

Our sense of balance is among the most central of our sensory systems, particularly in the evolution of human positional behavior. The peripheral vestibular system (PVS) comprises the organs responsible for this sense; the semicircular canals (detecting angular acceleration) and otolith organs (utricle and saccule; detecting linear acceleration, vibration, and head tilt). Reconstructing vestibular evolution in the human lineage, however, is problematic. In contrast to considerable study of the canals, relationships between external bone and internal membranous otolith organs (otolith system) remain largely unexplored. This limits our understanding of vestibular functional morphology. This study combines spherical harmonic modeling and landmark-based shape analyses to model the configuration of the human otolith system. Our approach serves two aims: (1) test the hypothesis that bony form covaries with internal membranous anatomy; and (2) create a 3D morphometric model visualizing bony and membranous structure. Results demonstrate significant associations between bony and membranous tissues of the otolith system. These data provide the first evidence that external structure of the human otolith system is directly related to internal anatomy, suggesting a basic biological relationship. Our results visualize this structural relationship, offering new avenues into vestibular biomechanical modeling and assessing the evolution of the human balance system.

Insights into Inner Ear Function and Disease Through Novel Visualization of the Ductus Reuniens, a Seminal Communication Between Hearing and Balance Mechanisms

The sensory end-organs responsible for hearing and balance in the mammalian inner ear are connected via a small membranous duct known as the ductus reuniens (also known as the reuniting duct (DR)). The DR serves as a vital nexus linking the hearing and balance systems by providing the only endolymphatic connection between the cochlea and vestibular labyrinth. Recent studies have hypothesized new roles of the DR in inner ear function and disease, but a lack of knowledge regarding its 3D morphology and spatial configuration precludes testing of such hypotheses. We reconstructed the 3D morphology of the DR and surrounding anatomy using osmium tetroxide micro-computed tomography and digital visualizations of three human inner ear specimens. This provides a detailed, quantitative description of the DR's morphology, spatial relationships to surrounding structures, and an estimation of its orientation relative to head position. Univariate measurements of the DR, inner ear, and cranial planes were taken using the software packages 3D Slicer and Zbrush. The DR forms a narrow, curved, flattened tube varying in lumen size, shape, and wall thickness, with its middle third being the narrowest. The DR runs in a shallow bony sulcus superior to the osseus spiral lamina and adjacent to a ridge of bone that we term the "crista reuniens" oriented posteromedially within the cranium. The DR's morphology and structural configuration relative to surrounding anatomy has important implications for understanding aspects of inner ear function and disease, particularly after surgical alteration of the labyrinth and potential causative factors for Ménière's disease.

Vestibular function in children with cochlear implant: Impact and evaluation

Over the last 30 years, cochlear implant (CI) has been dedicated to improving the rehabilitation of hearing impairments. However, CI has shown potential detrimental effects on vestibular function. For children, due to atypical symptoms and difficulty in cooperating with vestibular function tests, systematic and objective assessments of vestibular function with CI have been conducted sparsely. This review focuses on the impact of vestibular function in children with CI and summarized the evaluation of vestibular function in children. In addition, some recommended strategies are summarized and proposed.

Ductus Reuniens and Its Possible Role in Menière's Disease

OBJECTIVE

After 160 years the true underlying cause of Meniere's disease remains enigmatic. The aim of our study is to discuss the possible implication of an obstruction of the ductus reuniens as a cause in Menière's disease.

METHODOLOGY

We first conducted an historical study of the description of the ductus reuniens. We then reviewed the literature regarding ductus reuniens obstruction in animal experiments, human post-mortem studies and living ear imaging. We completed its description by modern microCT imaging. Limited knowledge on the fate of dislodged saccular otoconia is summarized. The possible implications for Meniere's attacks are discussed.

RESULTS

Victor Hensen was the first to describe the ductus reuniens in 1863. He described its length and width and predicted that saccular otoconia might enter the ductus and the cochlea. On microCT the narrowest width of the human ductus reuniens was 0.14 mm. The literature reports cochlear endolymphatic hydrops occurring after animal experimental obstruction of the duct. Human postmortem studies have confirmed saccular otoconial clumps entering the ductus and the cochlea. A postmortem study has shown sites of endolymphatic obstruction, and imaging speculates on blockages in ears with Meniere's disease. Dislodged utricular otoconia can be in clumps of otolithic membranes.

CONCLUSION

Blockages of the ductus reuniens and at other endolymphatic system sites appear to be a feature in Meniere's disease ears. The blockages have been postulated to be saccular otoconia either causing or aggravating hydrops. This could be consistent with observed nystagmus reversals during attacks as the endolymphatic sac attempts to clear the hydrops and the otoconia.

Objective vestibular function changes in children following cochlear implantation

BACKGROUND:

To date, systematically objective evaluations of vestibular function in children with cochlear implantation (CI) have been conducted sparsely, especially in children with large vestibular aqueduct syndrome (LVAS).

OBJECTIVE:

Our goal was to investigate the function of all five vestibular end-organs pre- and post-cochlear implantation in children with LVAS and normal CT.

METHODS:

In this retrospective cohort study, 34 children (age 4–17 years) with bilateral profound sensorineural hearing loss (SNHL) undergoing unilateral CI were included. Participants included 18 (52.9%) children with LVAS. Objective modalities to evaluate vestibular function included the caloric test, cervical vestibular-evoked myogenic potentials (cVEMP), ocular vestibular-evoked myogenic potentials (oVEMP), and video head impulse test (vHIT). All measurements were performed before surgery and 9 months after surgery.

RESULTS:

Mean age at CI was 8.1±3.7 years. Caloric testing showed hypofunction in 38.2% of cases before implantation and in 50% after (p > 0.05). We found a significant increase of overall abnormality rate in cVEMP and oVEMP from pre- to post-CI (p < 0.05). In all three semicircular canals tested by vHIT, there were no statistically significant mean gain changes (p > 0.05). Higher deterioration rates in cVEMP (53.3%) and oVEMP (52.0%) after surgery were observed (p < 0.05). In children with LVAS, cVEMP revealed a higher deterioration rate than superior semicircular canal (SSC) and posterior semicircular canal (PSC) (p < 0.05). In children with normal CT, the deterioration rates in VEMPs were both higher than those in vHIT (p < 0.05).

CONCLUSIONS:

In general, the otolith organs were the most affected peripheral vestibular sensors in children after cochlear implantation. The variations in otolith function influenced by CI were different between children with LVAS and normal CT. We recommend the use of this vestibular function test battery for children with cochlear implantation.

Three-dimensional visualization of the human membranous labyrinth: The membrana limitans and its role in vestibular form

The inner ear contains the end organs for balance (vestibular labyrinth) and hearing (cochlea). The vestibular labyrinth is comprised of the semicircular canals (detecting angular acceleration) and otolith organs (utricle and saccule, which detect linear acceleration and head tilt relative to gravity). Lying just inferior to the utricle is the membranous membrana limitans (ML). Acting as a keystone to vestibular geometry, the ML provides support for the utricular macula and acts as a structural boundary between the superior (pars superior) and inferior (pars inferior) portions of the vestibular labyrinth. Given its importance in vestibular form, understanding ML morphology is valuable in establishing the spatial organization of other vestibular structures, particularly the utricular macula. Knowledge of the 3D structure and variation of the ML, however, remain elusive. Our study addresses this knowledge gap by visualizing, in 3D, the ML and surrounding structures using micro-CT data. By doing so, we attempt to clarify: (a) the variation of ML shape; (b) the reliability of ML attachment sites; and (c) the spatial relationship of the ML to the stapes footplate using landmark-based Generalized Procrustes, Principal Component and covariance analyses. Results indicate a consistent configuration of three distinct bony ML attachments including an anterolateral, medial, and posterior attachment which all covary with bony structure. Our results set the stage for further understanding into vestibular and more specifically, utricular macula spatial configuration within the human head, offering the potential to aid in clinical and evolutionary studies which rely on a 3D understanding of vestibular spatial configuration.

IE-Map: a novel in-vivo atlas and template of the human inner ear

Brain atlases and templates are core tools in scientific research with increasing importance also in clinical applications. Advances in neuroimaging now allowed us to expand the atlas domain to the vestibular and auditory organ, the inner ear. In this study, we present IE-Map, an in-vivo template and atlas of the human labyrinth derived from multi-modal high-resolution magnetic resonance imaging (MRI) data, in a fully non-invasive manner without any contrast agent or radiation. We reconstructed a common template from 126 inner ears (63 normal subjects) and annotated it with 94 established landmarks and semi-automatic segmentations of all relevant macroscopic vestibular and auditory substructures. We validated the atlas by comparing MRI templates to a novel CT/micro-CT atlas, which we reconstructed from 21 publicly available post-mortem images of the bony labyrinth. Templates in MRI and micro-CT have a high overlap, and several key anatomical measures of the bony labyrinth in IE-Map are in line with micro-CT literature of the inner ear. A quantitative substructural analysis based on the new template, revealed a correlation of labyrinth parameters with total intracranial volume. No effects of gender or laterality were found. We provide the validated templates, atlas segmentations, surface meshes and landmark annotations as open-access material, to provide neuroscience researchers and clinicians in neurology, neurosurgery, and otorhinolaryngology with a widely applicable tool for computational neuro-otology.

Influence of storage on the quality of conventional CT and µCT-imaging for the middle and inner cat ear

The aim of this study was to analyze whether different fixation methods such as freezing or formaldehyde storage for different periods of time have an influence on the recognition of anatomical relevant structures in the middle and inner ear of the cat with conventional computed tomography (cCT) and micro-computed tomography (µCT). Besides, effects of freeze-thaw cycles on determined structures of the ear were investigated by means of histological slices. Three veterinarians with different radiologic expertise evaluated the scans of 30 dissected cat ears anonymously and scored predefined structures in a five-point scale with reference to visually sharp reproducibility and perfect image quality. The total scores of the different fixation groups as well as the ears within a group were compared with each other. Furthermore, an intra-reader examination including an evaluation of the identifiability of specified structures was performed for both imaging methods. cCT as well as µCT-scans have a very low variation coefficient of 1.6% and 2.3%, respectively. The results for the alterations between the different fixation methods show that the changes for cCT-scans are negligible, as the percentage alteration compared to fresh samples ranges in a very small interval with values from 1.0% better to 1.2% worse. µCT-scans are more influenced by the fixation method with a range from 1.3% better to 6.9% worse values. The scans mostly deteriorated after two freeze-thaw cycles (1.8% worse) and after storing the samples for 1 (2.4% worse), respectively, and 3 weeks in formaldehyde (6.9% worse).

Investigation of inner ear anatomy in mouse using X-ray phase contrast tomography

A thorough understanding of inner ear anatomy is important for investigators. However, investigation of the mouse inner ear is difficult due to the limitations of imaging techniques. X-ray phase contrast tomography increases contrast 100-1,000 times compared with conventional X-ray imaging. This study aimed to investigate inner ear anatomy in a fresh post-mortem mouse using X-ray phase contrast tomography and to provide a comprehensive atlas of microstructures with less tissue deformation. All experiments were performed in accordance with our institution's guidelines on the care and use of laboratory animals. A fresh mouse cadaver was scanned immediately after sacrifice using an inline phase contrast tomography system. Slice images were reconstructed using a filtered back-projection (FBP) algorithm. Standardized axial and coronal planes were adjusted with a multi-planar reconstruction method. Some three-dimensional (3D) objects were reconstructed by surface rendering. The characteristic features of microstructures, including otoconia masses of the saccular and utricular maculae, superior and inferior macula cribrosae, single canal, modiolus, and osseous spiral lamina, were described in detail. Spatial positions and relationships of the vestibular structures were exhibited in 3D views. This study investigated mouse inner ear anatomy and provided a standardized presentation of microstructures. In particular, otoconia masses were visualized in their natural status without contrast for the first time. The comprehensive anatomy atlas presented in this study provides an excellent reference for morphology studies of the inner ear.

Three-dimensional study of vestibular anatomy as it relates to the stapes footplate and its clinical implications: an augmented reality development

BACKGROUND

The anatomy of the membranous labyrinth within the vestibule has direct implications for surgical intervention. The anatomy of the otoliths has been studied, but there is limited information regarding their supporting connective tissue structures such as the membrana limitans in humans.

METHODS

One guinea pig and 17 cadaveric human temporal bones were scanned using micro computed tomography, after staining with 2 per cent osmium tetroxide and preservation with Karnovsky's solution, with a resolution from 1 µm to 55 µm. The data were analysed using VGStudio Max software, rendered in three-dimensions and published in augmented reality.

RESULTS

In 50 per cent of ears, the membrana limitans attached directly to the postero-superior part of the stapes footplate. If attachments were present in one ear, they were present bilaterally in 100 per cent of cases.

CONCLUSION

Micro computed tomography imaging allowed three-dimensional assessment of the inner ear. Such assessments are important as they influence the surgical intervention and the evolution of future innovations.

Enhanced contrast in X-ray microtomographic images of the membranous labyrinth using different X-ray sources and scanning modes

The vestibular system, located in the inner ear, plays a crucial role in balance and gaze stabilisation by sensing head movements. The interconnected tubes with membranous walls of the vestibular system are located in the skull bone (the 'membranous labyrinth'). Unfortunately, these membranes are very hard to visualise using three-dimensional (3D) X-ray imaging techniques. This difficulty arises due to the embedment of the membranes in the dense skull bone, the thinness of the membranes, and the small difference in X-ray absorption between the membranes and the surrounding fluid. In this study, we compared the visualisation of very small specimens (lizard heads with vestibular systems smaller than 3 mm) by X-ray computed micro-tomography (μCT) based on synchrotron radiation and conventional sources. A visualisation protocol using conventional X-ray μCT would be very useful thanks to the ease of access and lower cost. Careful optimisation of the acquisition parameters enables detection of the membranes by using μCT scanners based on conventional microfocus sources, but in some cases a low contrast-to-noise ratio (CNR) prevents fast and reliable segmentation of the membranes. Synchrotron radiation μCT proved to be preferable for the visualisation of the small samples with very thin membranes, because of their high demands for spatial and contrast resolution. The best contrast was obtained by using synchrotron radiation μCT working in phase-contrast mode, leading to up to twice as high CNRs than the best conventional μCT results. The CNR of the synchrotron radiation μCT scans was sufficiently high enough to enable the construction of a 3D model by the means of semi-automatic segmentation of the membranous labyrinth. Membrane thickness was found to range between 2.7 and 36.3 μm. Hence, the minimal membrane thickness was found to be much smaller than described previously in the literature (between 10 and 50 μm).

How does cochlear implantation affect five vestibular end-organ functions and dizziness?

OBJECTIVE

To evaluate all five vestibular end-organ functions (lateral, anterior, posterior semicircular canal, utricule, and saccule) and to investigate the relationship between Dizziness Handicap Inventory (DHI) and vestibular functions prior to CI (cochlear implantation) and at postoperative day 3 and month 3.

METHODS

A total of 42 patients (age 16-70years) with normal vestibular functions preoperatively and undergoing unilateral CI were included in this prospective descriptive study. Video head impulse test (vHIT) for three semicircular canal (SSC) functions, ocular vestibular-evoked myogenic potential (oVEMP) for utricule function, cervical vestibular-evoked myogenic potential (cVEMP) for saccule function and DHI for subjective vertigo symptoms were performed prior to CI and at postoperative day 3 and month 3.

RESULTS

There was a significant impairment of vestibular function in 12 patients (28.5%) on the implantation side and significant DHI increase was observed in 13 of 42 (30.9%) patients at postoperative day 3 after CI (p<0.05). We found SSC dysfunction in 7 patients (16,6%) who underwent observation with vHIT, saccule dysfunction in 8 patients (19%) with cVEMP and utricule dysfunction in 5 patients (11.9%) with oVEMP on the operated side 3days after surgery (p<0.05). Posterior SSC functions (5 patients) were more affected than lateral SSC functions (3 patients). At postoperative month 3, six patients (14.2%) still had deteriorating results in the objective tests and significant DHI increase was continued in 4 (9.5%) patients (p<0.05). The deterioration in vHIT continued in only 1 (2.3%) patient (p>0.05). The deterioration in cVEMP continued in 5 (11.9%) patients (p<0.05). The deterioration in oVEMP continued in 2 (4.7%) patients (p>0.05). There was a significant correlation between DHI and objective vestibular tests both in the early and late postoperative period (r=0.795; p<0.05).

CONCLUSION

Our study showed that both canal and otolith functions can be damaged after CI especially in the early postoperative period. Surprisingly, posterior SSC functions were more affected than lateral SSC. Therefore, a gold standard vestibular test battery that can evaluate each of three SSC canals and two otoliths functions is essential. Since a single vestibular test for this purpose is not available, we recommend the use of the three available vestibular tests together. This test battery, which is capable of evaluating five vestibular end-organ functions in preoperative and postoperative vestibular evaluations, can provide more accurate results not only for CI but also for most otologic surgeries.

Assessing morphology and function of the semicircular duct system: introducing new in-situ visualization and software toolbox

The semicircular duct system is part of the sensory organ of balance and essential for navigation and spatial awareness in vertebrates. Its function in detecting head rotations has been modelled with increasing sophistication, but the biomechanics of actual semicircular duct systems has rarely been analyzed, foremost because the fragile membranous structures in the inner ear are hard to visualize undistorted and in full. Here we present a new, easy-to-apply and non-invasive method for three-dimensional in-situ visualization and quantification of the semicircular duct system, using X-ray micro tomography and tissue staining with phosphotungstic acid. Moreover, we introduce Ariadne, a software toolbox which provides comprehensive and improved morphological and functional analysis of any visualized duct system. We demonstrate the potential of these methods by presenting results for the duct system of humans, the squirrel monkey and the rhesus macaque, making comparisons with past results from neurophysiological, oculometric and biomechanical studies. Ariadne is freely available at http://www.earbank.org.

What vestibular tests to choose in symptomatic patients after a cochlear implant? A systematic review and meta-analysis

Vestibular function after cochlear implantation is difficult to understand, as subjective vestibular symptoms seem uncorrelated with the results of objective tests. Consequently, clinicians may struggle to decide what assessments to perform for a symptomatic patient. We used a systematic review and meta-analysis approach to enlighten this point. After a study inclusion process, results were classified into four different groups for each test in each study: (1) 'true positive' if the test showed impairment from pre-operative to post-operative in symptomatic patients; (2) 'false positive' if the test showed impairment from pre-operative to post-operative in asymptomatic patients; (3) 'true negative' if the test showed no impairment in asymptomatic patients; and (4) 'false negative' if the test showed no impairment in symptomatic patients. From these groups, sensitivities and specificities of each test were calculated in a meta-analysis. After reviewing more than 3000 references, 16 studies were included, representing 957 patients. The meta-analysis revealed a sensitivity of 0.21 (CI 95 % 0.08-0.40) for the caloric tests, of 0.32 (CI 95 % 0.15-0.54) for the cervical vestibular evoked myogenic potentials (c-VEMP), and of 0.5 (CI 95 % 0.07-0.93) for the head impulse tests. The analysis of prevalence revealed that c-VEMPs were the most often impaired, and the HIT the most often conserved. Our review and meta-analysis revealed that no vestibular test is sensitive enough to be recommended as a single test. Ideally, all the five vestibular sensors should be tested. In clinical practice, we suggest a case-to-case strategy according to patient's symptoms and their suspected origin.

The response of guinea pig primary utricular and saccular irregular neurons to bone-conducted vibration (BCV) and air-conducted sound (ACS)

This study sought to characterize the response of mammalian primary otolithic neurons to sound and vibration by measuring the resting discharge rates, thresholds for increases in firing rate and supra-threshold sensitivity functions of guinea pig single primary utricular and saccular afferents. Neurons with irregular resting discharge were activated in response to bone conducted vibration (BCV) and air conducted sound (ACS) for frequencies between 100 Hz and 3000 Hz. The location of neurons was verified by labelling with neurobiotin. Many afferents from both maculae have very low or zero resting discharge, with saccular afferents having on average, higher resting rates than utricular afferents. Most irregular utricular and saccular afferents can be evoked by both BCV and ACS. For BCV stimulation: utricular and saccular neurons show similar low thresholds for increased firing rate (around 0.02 g on average) for frequencies from 100 Hz to 750 Hz. There is a steep increase in rate change threshold for BCV frequencies above 750 Hz. The suprathreshold sensitivity functions for BCV were similar for both utricular and saccular neurons, with, at low frequencies, very steep increases in firing rate as intensity increased. For ACS stimulation: utricular and saccular neurons can be activated by high intensity stimuli for frequencies from 250 Hz to 3000 Hz with similar flattened U-shaped tuning curves with lowest thresholds for frequencies around 1000-2000 Hz. The average ACS thresholds for saccular afferents across these frequencies is about 15-20 dB lower than for utricular neurons. The suprathreshold sensitivity functions for ACS were similar for both utricular and saccular neurons. Both utricular and saccular afferents showed phase-locking to BCV and ACS, extending up to frequencies of at least around 1500 Hz for BCV and 3000 Hz for ACS. Phase-locking at low frequencies (e.g. 100 Hz) imposes a limit on the neural firing rate evoked by the stimulus since the neurons usually fire one spike per cycle of the stimulus.

CONCLUSION

These results are in accord with the hypothesis put forward by Young et al. (1977) that each individual cycle of the waveform, either BCV or ACS, is the effective stimulus to the receptor hair cells on either macula. We suggest that each cycle of the BCV or ACS stimulus causes fluid displacement which deflects the short, stiff, hair bundles of type I receptors at the striola and so triggers the phase-locked neural response of primary otolithic afferents.

X-ray microtomography study of otic capsule deficiencies: three-dimensional modelling of the fissula ante fenestram

BACKGROUND

The postulated sites of perilymph fistulae involve otic capsule deficiencies, in particular, at the fissula ante fenestram. Histological studies have revealed this to be a channel extending from the middle ear, and becoming continuous with the inner ear medial to the anterior limit of the oval window. The relationship between a patent fissula and symptoms of perilymph fistula is contentious.

OBJECTIVE

The understanding of the anatomy of the fissula ante fenestram is incomplete. Histopathology is inherently destructive to the delicate ultrastructure of the middle and inner ear. Conversely, X-ray microtomography allows non-destructive examination of the otic capsule. In this study, we used X-ray microtomography to characterise the fissula ante fenestram.

MATERIALS AND METHODS

We imaged cadaveric temporal bones with X-ray microtomography. We used the Avizo Fire (Visualization Science Group, Merignac Cedex, France) software to perform post-processing and image analysis.

RESULTS

Three-dimensional modelling of the fissula ante fenestram allowed stratification into four forms: rudimentary pit; partial fissula; complete occluded fissula; and complete patent fissula.

CONCLUSION

X-ray microtomography showed that the fissula ante fenestram is present in various forms from rudimentary pit to complete deficiency of the otic capsule. This understanding may have implications for otologic surgery and clinical diagnosis of perilymph fistula.

Accuracy of computer-aided geometric three-dimensional reconstruction of the human petrous bone based on serial unstained celloidin sections

The aim of this study was to present a comprehensive three-dimensional (3D) morphology of the petrous bone with computer image-processing technology, which could be beneficial for the teaching of anatomy and for surgical procedures. The unstained celloidin sections of human temporal bone were digitized with high resolution and quality, and then processed with Amira^® software to include alignment, segmentation and reconstruction. The integral structure of the human inner ear was presented with computer modeling, including the petrous bone, bone labyrinth, internal carotid artery canal, internal jugular vein canal, sigmoid sinus, inferior petrosal sinus, glossopharyngeal meatus, vagal meatus, internal acoustic meatus, facial nerve canal, greater superficial petrosal nerve, vestibular aqueduct, extraosseous portion of the endolymphatic sac, round and oval window, processus cochleariformis and pyramidal eminence. The 3D model showed detailed structure of the external and internal petrous bone, as well as their spatial relationship. The present study suggests the feasibility of comprehensive 3D reconstruction of the petrous bone using unstained celloidin sections, which may provide advantages for future study.

Computed tomography analysis of guinea pig bone: architecture, bone thickness and dimensions throughout development

The domestic guinea pig, Cavia aperea f. porcellus, belongs to the Caviidae family of rodents. It is an important species as a pet, a source of food and in medical research. Adult weight is achieved at 8–12 months and life expectancy is ∼5–6 years. Our aim was to map bone local thickness, structure and dimensions across developmental stages in the normal animal. Guinea pigs (n = 23) that had died of natural causes were collected and the bones manually extracted and cleaned. Institutional ethical permission was given under the UK Home Office guidelines and the Veterinary Surgeons Act. X-ray Micro Computed Tomography (microCT) was undertaken on the left and right scapula, humerus and femur from each animal to ascertain bone local thickness. Images were also used to undertake manual and automated bone measurements, volumes and surface areas, identify and describe nutrient, supratrochlear and supracondylar foramina. Statistical analysis between groups was carried out using ANOVA with post-hoc testing. Our data mapped a number of dimensions, and mean and maximum bone thickness of the scapula, humerus and femur in guinea pigs aged 0–1 month, 1–3 months, 3–6 months, 6 months–1 year and 1–4 years. Bone dimensions, growth rates and local bone thicknesses differed between ages and between the scapula, humerus and femur. The microCT and imaging software technology showed very distinct differences between the relative local bone thickness across the structure of the bones. Only one bone showed a singular nutrient foramen, every other bone had between 2 and 5, and every nutrient canal ran in an oblique direction. In contrast to other species, a supratrochlear foramen was observed in every humerus whereas the supracondylar foramen was always absent. Our data showed the bone local thickness, bone structure and measurements of guinea pig bones from birth to 4 years old. Importantly it showed that bone development continued after 1 year, the point at which most guinea pigs have reached full weight. This study is the first to show the high abundance (100% in this study) of the supratrochlear foramen within the guinea pig humerus and the complete absence of a supracondylar foramen, which is different to many other species and may also affect potential fracture points and frequencies. Understanding bone morphology and growth is essential in not only understanding the requirements of the healthy guinea pig, but also necessary in order to investigate disease states.

Ex vivo visualization of the mouse otoconial layer compared with micro-computed tomography

HYPOTHESIS

Micro-computed tomography (micro-CT) is useful for assessing the 3-dimensional (3D) morphology and age-related changes of the otoconial layer.

BACKGROUND

Wriggle mouse Sagami (WMS) is a mutant of the plasma membrane Ca2+ ATPase type2 gene (Atp2b2) with deficits in the saccular otoconia. We examined the effectiveness of micro-CT in evaluating the otoconial layer of WMS and C57BL/6J mice.

METHODS

Otic capsules of C57BL/6J mice at different fixation time were examined using micro-CT to evaluate the effects of the fixation time on the otoconial layer. Otic capsules of Atp2b2(wri/wri), Atp2b2(wri/+), and Atp2b2(+/+) mice at P14, P21, and the age of 3 months were used to analyze age-related changes in the otoconial layer. A series of cross-section and 3D reconstructed images of the otoconial layer were obtained. The micro-CT findings were compared with the otic capsule findings cleared in methyl salicylate using stereomicroscopy.

RESULTS

Micro-CT produced high-resolution images of the otoconial layer, thereby providing information regarding the spatial configuration and 3D curvature. There were no changes between the different fixation times. In the Atp2b2(wri/+) and Atp2b2(+/+) mice, the saccular and utricular otoconial layers were normal among all age groups. In the Atp2b2(wri/wri) mice, the saccular otoconial layer decreased on P14 and was absent on P21, whereas the utricular otoconial layer disappeared at 3 months of age.

CONCLUSION

We obtained precise information regarding the mouse otoconial layer with minimum artifacts. This method is expected to improve our understanding of the physiologic function and age-related changes in otolith organs.

Geometrical and volume changes of the membranous vestibular labyrinth in guinea pigs with endolymphatic hydrops

OBJECTIVE

To evaluate geometrical and volume changes of membranous vestibular labyrinths in guinea pigs after endolymphatic hydrops (EH).

METHODS

The membranous labyrinths of normal guinea pigs and of those with EH for 4 and 8 weeks were reconstructed after being scanned using micro-computed tomography subseqent to being stained in osmium tetroxide (OsO4). The diameters and volumes of the semicircular ducts, ampullae, utricles and saccules were measured based on the three-dimensional models.

RESULTS

The diameters of the ampullae and utricles of EH guinea pigs were greater than those of the normal guinea pigs, while there were no significant differences in the diameters of the semicircular ducts among all groups. The volumes of ampullae, utricles and saccules of the EH groups were greater than those of the control group, but there were no changes in volumes of semicircular ducts after EH.

CONCLUSION

The dilations of the membranous vestibular labyrinth in guinea pigs with EH mainly occur at the ampullae, utricles and saccules.

Three-dimensional histological specimen preparation for accurate imaging and spatial reconstruction of the middle and inner ear

PURPOSE

This paper presents a highly accurate cross-sectional preparation technique. The research aim was to develop an adequate imaging modality for both soft and bony tissue structures featuring high contrast and high resolution. Therefore, the advancement of an already existing micro-grinding procedure was pursued. The central objectives were to preserve spatial relations and to ensure the accurate three-dimensional reconstruction of histological sections.

METHODS

Twelve human temporal bone specimens including middle and inner ear structures were utilized. They were embedded in epoxy resin, then dissected by serial grinding and finally digitalized. The actual abrasion of each grinding slice was measured using a tactile length gauge with an accuracy of one micrometre. The cross-sectional images were aligned with the aid of artificial markers and by applying a feature-based, custom-made auto-registration algorithm. To determine the accuracy of the overall reconstruction procedure, a well-known reference object was used for comparison. To ensure the compatibility of the histological data with conventional clinical image data, the image stacks were finally converted into the DICOM standard.

RESULTS

The image fusion of data from temporal bone specimens' and from non-destructive flat-panel-based volume computed tomography confirmed the spatial accuracy achieved by the procedure, as did the evaluation using the reference object.

CONCLUSION

This systematic and easy-to-follow preparation technique enables the three-dimensional (3D) histological reconstruction of complex soft and bony tissue structures. It facilitates the creation of detailed and spatially correct 3D anatomical models. Such models are of great benefit for image-based segmentation and planning in the field of computer-assisted surgery as well as in finite element analysis. In the context of human inner ear surgery, three-dimensional histology will improve the experimental evaluation and determination of intra-cochlear trauma after the insertion of an electrode array of a cochlear implant system.

Heavy metal staining, a comparative assessment of gadolinium chloride and osmium tetroxide for inner ear labyrinthine contrast enhancement using X-ray microtomography

CONCLUSION

The use of both gadolinium chloride (GdCl(3)) and osmium tetroxide (OsO(4)) allowed for the visualization of the membranous labyrinth and other intralabyrinthine structures, at different intensities, as compared with the control sample. This initial comparison shows the advantages of GdCl(3) in radiological assessments and OsO(4) in more detailed anatomical studies and pathways of labyrinthine pathogenesis using X-ray microtomography (microCT).

OBJECTIVE

To assess an improved OsO(4) staining protocol and compare the staining affinities against GdCl(3).

METHODS

Guinea pig temporal bones were stained with either GdCl(3) (2% w/v) for 7 days or OsO(4) (2% w/v) for 3 days, and scanned in a microCT system. The post-scanned datasets were then assessed in a 3D rendering program.

RESULTS

The enhanced soft tissue contrast as presented in the temporal bones stained with either GdCl(3) or OsO(4) allowed for the membranous labyrinth to be visualized throughout the whole specimen. GdCl(3)-stained specimens presented more defined contours of the bone profile in the radiographs, while OsO(4)-stained specimens provided more anatomical detail of individual intralabyrinthine structures, hence allowing spatial relationships to be visualized with ease in a 3D rendering context and 2D axial slice images.

Optimising μCT imaging of the middle and inner cat ear

This study's aim was to determine the optimal scan parameters for imaging the middle and inner ear of the cat with micro-computertomography (μCT). Besides, the study set out to assess whether adequate image quality can be obtained to use μCT in diagnostics and research on cat ears. For optimisation, μCT imaging of two cat skull preparations was performed using 36 different scanning protocols. The μCT-scans were evaluated by four experienced experts with regard to the image quality and detail detectability. By compiling a ranking of the results, the best possible scan parameters could be determined. From a third cat's skull, a μCT-scan, using these optimised scan parameters, and a comparative clinical CT-scan were acquired. Afterwards, histological specimens of the ears were produced which were compared to the μCT-images. The comparison shows that the osseous structures are depicted in detail. Although soft tissues cannot be differentiated, the osseous structures serve as valuable spatial orientation of relevant nerves and muscles. Clinical CT can depict many anatomical structures which can also be seen on μCT-images, but these appear a lot less sharp and also less detailed than with μCT.

A Brief Review of Visualization Techniques for Nerve Tissue Engineering Applications

In nerve tissue engineering, scaffolds act as carriers for cells and biochemical factors and as constructs providing appropriate mechanical conditions. During nerve regeneration, new tissue grows into the scaffolds, which degrade gradually. To optimize this process, researchers must study and analyze various morphological and structural features of the scaffolds, the ingrowth of nerve tissue, and scaffold degradation. Therefore, visualization of the scaffolds as well as the generated nerve tissue is essential, yet challenging Visualization techniques currently used in nerve tissue engineering include electron microscopy, confocal laser scanning microscopy (CLSM), and micro-computed tomography (micro-CT or μCT). Synchrotron-based micro-CT (SRμCT) is an emerging and promising technique, drawing considerable recent attention. Here, we review typical applications of these visualization techniques in nerve tissue engineering. The promise, feasibility, and challenges of SRμCT as a visualization technique applied to nerve tissue engineering are also discussed.

An experimentally validated micromechanical model of a rat vertebra under compressive loading

In recent years, finite element analysis (FEA) has been increasingly applied to examine and predict the mechanical behaviour of craniofacial and other bony structures. Traditional methods used to determine material properties and validate finite element models (FEMs) have met with variable success, and can be time-consuming. An implicit assumption underlying many FE studies is that relatively high localized stress/strain magnitudes identified in FEMs are likely to predict material failure. Here we present a new approach that may offer some advantages over previous approaches. Recently developed technology now allows us to both image and conduct mechanical tests on samples in situ using a materials testing stage (MTS) fitted inside the microCT scanner. Thus, micro-finite element models can be created and validated using both quantitative and qualitative means. In this study, a rat vertebra was tested under compressive loading until failure using an MTS. MicroCT imaging of the vertebra before mechanical testing was used to create a high resolution finite element model of the vertebra. Load-displacement data recorded during the test were used to calculate the effective Young's modulus of the bone (found to be 128 MPa). The microCT image of the compressed vertebra was used to assess the predictive qualities of the FE model. The model showed the highest stress concentrations in the areas that failed during the test. Clearly, our analyses do not directly address biomechanics of the craniofacial region; however, the methodology adopted here could easily be applied to examine the properties and behaviour of specific craniofacial structures, or whole craniofacial regions of small vertebrates. Experimentally validated micro-FE analyses are a powerful method in the study of materials with complex microstructures such as bone.

A mathematical model of human semicircular canal geometry: a new basis for interpreting vestibular physiology

We report a precise, simple, and accessible method of mathematically measuring and modeling the three-dimensional (3D) geometry of semicircular canals (SCCs) in living humans. Knowledge of this geometry helps understand the development and physiology of SCC stimulation. We developed a framework of robust techniques that automatically and accurately reconstruct SCC geometry from computed tomography (CT) images and are directly validated using micro-CT as ground truth. This framework measures the 3D centroid paths of the bony SCCs allowing direct comparison and analysis between ears within and between subjects. An average set of SCC morphology is calculated from 34 human ears, within which other geometrical attributes such as nonplanarity, radius of curvature, and inter-SCC angle are examined, with a focus on physiological implications. These measurements have also been used to critically evaluate plane fitting techniques that reconcile many of the discrepancies in current SCC plane studies. Finally, we mathematically model SCC geometry using Fourier series equations. This work has the potential to reinterpret physiology and pathophysiology in terms of real individual 3D morphology.

A critical review of the neurophysiological evidence underlying clinical vestibular testing using sound, vibration and galvanic stimuli

In addition to activating cochlear receptors, air conducted sound (ACS) and bone conducted vibration (BCV) activate vestibular otolithic receptors, as shown by neurophysiological evidence from animal studies--evidence which is the foundation for using ACS and BCV for clinical vestibular testing by means of vestibular-evoked myogenic potentials (VEMPs). Recent research is elaborating the specificity of ACS and BCV on vestibular receptors. The evidence that saccular afferents can be activated by ACS has been mistakenly interpreted as showing that ACS only activates saccular afferents. That is not correct - ACS activates both saccular and utricular afferents, just as BCV activates both saccular and utricular afferents, although the patterns of activation for ACS and BCV do not appear to be identical. The otolithic input to sternocleidomastoid muscle appears to originate predominantly from the saccular macula. The otolithic input to the inferior oblique appears to originate predominantly from the utricular macula. Galvanic stimulation by surface electrodes on the mastoids very generally activates afferents from all vestibular sense organs. This review summarizes the physiological results, the potential artifacts and errors of logic in this area, reconciles apparent disagreements in this field. The neurophysiological results on BCV have led to a new clinical test of utricular function - the n10 of the oVEMP. The cVEMP tests saccular function while the oVEMP tests utricular function.

Attachment of the utricular and saccular maculae to the temporal bone

The present investigation concerns the true morphology of the attachment of the two otolith receptor organs the utricular and the saccular maculae in two and three dimensions. By applying a new visualization method, which utilized the application of X-ray microtomography and a method of contrast enhancement based on en-bloc staining in osmium tetroxide, we were able to overcome problems of artefact production such as tissue distortion and loss of valuable information that was present in previous studies. A series of more than 1000 axial sections were obtained for each of the specimens, which subsequently formed the basis for detailed 2D and 3D visualizations. Our interpretations of these data reveal that the saccular maculae are closely attached to the curved bony surface of the temporal bone as traditionally believed, but the utricular macula is attached to the temporal bone only at the anterior region of the macula.