Analysis of Cyanide in Blood by Headspace-Isotope-Dilution-GC-MS

Spectroscopic and Theoretical Studies on the Selective Detection of Cyanide Ions by a Turn-On Fluorescent Chemo-Dosimeter and its Application in Living Cell Imaging

A new chemo-dosimeter AK4 containing quinoline fluorophore has rationally been designed, synthesised and characterized using 1H and 13C NMR and mass spectral techniques. The probe senses explicitly CN- ion through a dramatic enhancement in fluorescence over other commonly coexistent anions in H2O:DMSO (9:1 v/v) medium over a broad pH range (4-10). 1H NMR titration revealed the deprotonation followed by nucleophilic addition reaction of CN-, which was supported by 13C NMR and mass spectral examinations. The Job's continuous variation method indicated the formation of a 1:1 adduct between AK4 and CN- with a binding constant of 1.62 × 104 M-1. A limit of detection (LOD) towards CN- of 0.69 µM has been determined, which is much lower than the World Health Organization (WHO) recommended limit of CN- in drinking water (1.9 µM). The changes in the optical properties of AK4 upon reaction with CN- were delineated using Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) calculations. Moreover, fluorescence microscopic studies established that AK4 could be an effective probe for imaging intracellular CN- in HeLa cells.

Spectral and theoretical analysis of derivatives of 1,2,3,3-tetramethyl-3H-indolium iodide (TMI), a highly selective derivatization reagent of cyanide, and their utility for the analysis of cyanide concentrations in beverages

We develop a specific derivatization gas chromatography-mass spectrometry (GC-MS) method for cyanide using 1,2,3,3-tetramethyl-3H-indium iodide as the derivatization reagent. The derivative compounds were synthesized and characterized using 1H nuclear magnetic resonance (NMR), 13C NMR, and Fourier transform infrared (FT-IR) spectroscopy. The high selectivity of this derivatization for cyanide is supported by calculations and activation energy comparisons. We applied this method to pure water, green tea, orange juice, coffee cafe au lait, and milk. Derivatization was performed by diluting 20 μL of sample solution with 0.1 M NaOH and adding 100 μL of saturated borax solution and 100 μL of 8 mM TMI solution, each drink was completed in 5 min at room temperature, and selected ion (m/z = 200) monitoring analysis was linear (R2 > 0.998) at 0.15 to 15 μM, with detection limits of 4-11 μM were shown. This method is expected to be widely used in forensic toxicology analysis and can be applied to beverages, which are forensically important field samples.

Simple and simultaneous quantification of cyanide, ethanol, and 1-propanol in blood by headspace GC–MS/NPD with Deans switch dual detector system

Cyanide is a powerful and rapidly acting poison. In Japan, cyanide poisoning is rare, and regular cyanide testing can be costly and time consuming. In contrast, alcohol analysis is routinely performed in most forensic laboratories. In this study, we attempted to develop a method for the simultaneous quantification of cyanide and alcohols in blood using headspace gas chromatography (HS-GC). As nitrogen-phosphorus detection (NPD) is more sensitive to hydrogen cyanide than mass spectrometry (MS), a Deans switch was used to switch the detectors during a single run. The separation provided by three analytical columns, PoraBOND Q, CP-Sil 5 CB, and HP-INNOWax, was investigated, and PoraBOND Q was selected. The use of HS-GC-MS/NPD with a Deans switch enabled the simple and simultaneous quantification of cyanide, ethanol, and 1-propanol. Eighteen other volatile compounds were detected in the SIM/scan mode of the MS.

Gas chromatography-mass spectrometric identification of cyanide using a nucleophilic substitution based derivatization with S-phenyl benzenethiosulfonate

A novel, simple and efficient analytical method for GC-MS based identification of cyanide has been developed using a single step nucleophilic substitution based derivatization of cyanide in aqueous medium. The nucleophilic substitution reaction of cyanide with S-phenyl benzenethiosulfonate results in the formation of phenyl thiocyanate as a cyanide derivative and it was found that the relative response of the resultant cyanide derivative was much higher than that of the cyanide derivatives resulting from disulfide based derivatizing agents. The sample preparation protocol for the identification of cyanide in aqueous samples was also optimized with the new derivatizing agent. Derivatization followed by liquid-liquid extraction was employed for the preparation of aqueous samples containing cyanide salts. The resultant samples were subjected to GC-MS analysis for the identification of the cyanide derivative. Under optimized conditions, the detection and quantification limits for cyanide aqueous samples were found to be 0.075 μg mL-1 and 0.25 μg mL-1 respectively. The calibration curve had a linear relationship with y = 0.086x - 0.076 and r2 = 0.997 for the working range of 0.25 μg mL-1 to 50 μg mL-1. The intraday RSDs were between 2.24 and 8.17%, and the interday RSDs were between 2.22 and 12.85%. The method can also be successfully employed for the identification of hydrogen cyanide in aqueous medium. The applicability of the present method was demonstrated by analysing a real sample from apple seed extraction.

Gold Nanoparticles (AuNPs) as Reactive Matrix for Detection of Trace Levels of HCN in Air by Laser Desorption/Ionization Mass Spectrometry (LDI-MS)

Under direct laser desorption/ionization mass spectrometric conditions, the irradiation of target spots made of gold nanoparticle residues generates a series of peaks at m/z 197, 394, 591… representing Au_n^- ions (n = 1-3). In contrast, spectra recorded from gold nanoparticles directly mixed with an alkali cyanide exhibited an additional peak at m/z 249, indicating an abundant generation of gaseous [Au(CN)₂]^- ions upon irradiation. The relative intensity of the m/z 249 peak surged when the amount of cyanide in the mixture was increased. Most remarkably, a peak at m/z 249 was observed even from neat AuNPs upon irradiation, if a nearby spot, which was not irradiated, happened to bear a cyanide sample. We postulated that traces of HCN emanating from the headspace of aqueous cyanide solution during the sample-plate preparation is sufficient to convert gold to AuCN, which is subsequently detected as [Au(CN)₂]^-. Further experiments demonstrated that the relative intensity of the m/z 249 peak diminishes exponentially as the AuNP spot becomes more distant from the putative HCN source. Eventually, the method was developed as an efficient procedure to detect HCN or alkali cyanides. Using KCN, the detection limits were determined to be below 10 pg of CN^- per spot. The method also demonstrated that, upon crushing, the seeds or roots of certain fruits and vegetables such as apple, peach, radish, and cassava, but not carrot, release HCN in amounts detectable by this method. Graphical Abstract.

A highly selective colorimetric chemosensor for cyanide and sulfide in aqueous solution: experimental and theoretical studies

A selective chemosensor was developed for the colorimetric detection of CN⁻ and S²⁻ in aqueous solution.

Ultra-sensitive determination of cyanide in surface water by gas chromatography-tandem mass spectrometry after derivatization with 2-(dimethylamino)ethanethiol

A gas chromatography-tandem mass spectrometric (GC-MS/MS) method has been established for the determination of cyanide in surface water. This method is based on the derivatization of cyanide with 2-(dimethylamino)ethanethiol in surface water. The following optimum reaction conditions were established: reagent dosage, 0.7 g L(-1) of 2-(dimethylamino)ethanethiol; pH 6; reaction carried out for 20 min at 60°C. The organic derivative was extracted with 3 mL of ethyl acetate, and then measured by using GC-MS/MS. Under the established conditions, the detection and quantification limits were 0.02 μg L(-1) and 0.07 μg L(-1) in 10-mL of surface water, respectively. The calibration curve had a linear relationship relationship with y=0.7140x+0.1997 and r(2)=0.9963 (for a working range of 0.07-10 μg L(-1)) and the accuracy was in a range of 98-102%; the precision of the assay was less than 7% in surface water. The common ions Cl(-), F(-), Br(-), NO3(-), SO4(2-), PO4(3-), K(+), Na(+), NH4(+), Ca(2+), Mg(2+), Ba(2+), Mn(4+), Mn(2+), Fe(3+), Fe(2+) and sea water did not interfere in cyanide detection, even when present in 1000-fold excess over the species. Cyanide was detected in a concentration range of 0.07-0.11 μg L(-1) in 6 of 10 surface water samples.

A disposable blood cyanide sensor

Deaths due to smoke inhalation in fires are often due to poisoning by HCN. Rapid administration of antidotes can result in complete resuscitation of the patient but judicious dosing requires the knowledge of the level of cyanide exposure. Rapid sensitive means for blood cyanide quantitation are needed. Hydroxocyanocobinamide (OH(CN)Cbi) reacts with cyanide rapidly; this is accompanied by a large spectral change. The disposable device consists of a pair of nested petri dish bottoms and a single top that fits the outer bottom dish. The top cover has a diametrically strung porous polypropylene membrane tube filled with aqueous OH(CN)Cbi. One end of the tube terminates in an amber (583nm) light emitting diode; the other end in a photodiode via an acrylic optical fiber. An aliquot of the blood sample is put in the inner dish, the assembly covered and acid is added through a port in the cover. Evolved HCN diffuses into the OH(CN)Cbi solution and the absorbance in the long path porous membrane tube cell is measured within 160 s. The LOD was 0.047, 1.0, 0.15, 5.0 and 2.2 μM, respectively, for water (1 mL), bovine blood (100 μL, 1 mL), and rabbit blood (20 μL, 50 μL). RSDs were<10% in all cases and the linear range extended from 0.5 to 200 μM. The method was validated against a microdiffusion approach and applied to the measurement of cyanide in rabbit and human blood. The disposable device permits field measurement of blood cyanide in <4 min.

Recent developments in cyanide detection: a review

The extreme toxicity of cyanide and environmental concerns from its continued industrial use continue to generate interest in facile and sensitive methods for cyanide detection. In recent years, there is also additional recognition of HCN toxicity from smoke inhalation and potential use of cyanide as a weapon of terrorism. This review summarizes the literature since 2005 on cyanide measurement in different matrices ranging from drinking water and wastewater, to cigarette smoke and exhaled breath to biological fluids like blood, urine and saliva. The dramatic increase in the number of publications on cyanide measurement is indicative of the great interest in this field not only from analytical chemists, but also researchers from diverse environmental, medical, forensic and clinical arena. The recent methods cover both established and emerging analytical disciplines and include naked eye visual detection, spectrophotometry/colorimetry, capillary electrophoresis with optical absorbance detection, fluorometry, chemiluminescence, near-infrared cavity ring down spectroscopy, atomic absorption spectrometry, electrochemical methods (potentiometry/amperometry/ion chromatography-pulsed amperometry), mass spectrometry (selected ion flow tube mass spectrometry, electrospray ionization mass spectrometry, gas chromatography-mass spectrometry), gas chromatography (nitrogen phosphorus detector, electron capture detector) and quartz crystal mass monitors.