Analyses of Chloramphenicol in Biological Samples by HPLC

Ultrasensitive detection of chloramphenicol in water using functionalized polymers with an aluminium organic framework

Metal-Organic Frameworks (MOFs) are extensively used as electrode material in various sensing applications due to their efficacious porous nature and tunable properties. However, pristine MOFs lack conductive attributes that hinder their wide usage in electrochemical applications. Electropolymerization of several aromatic monomers has been a widely used strategy for preparing conducting electrode materials for various sensing applications in the past decades. Herein, we report a similar approach by employing the electropolymerization method to create a functional polymer layer to enhance the sensitivity of an Aluminium Organic Framework (DUT-4) for the selective detection of Chloramphenicol (CAP) antibiotic in aqueous environment. The combined strategy using the conducting polymer layer with the porous Al MOF provides surpassing electrochemical performance for sensing CAP with regard to the very low detection limit (LOD = 39 nM) and exceptionally high sensitivity (11943 μA mM-1 cm-2). In addition, the fabricated sensor exhibited good selectivity, reproducibility and stability. The developed method was successfully evaluated in various real samples including lake water and river water for CAP detection with good recovery percentages even at lower concentrations.

Covalently Functionalized Graphene with Molecularly Imprinted Polymers for Selective Adsorption and Electrochemical Detection of Chloramphenicol

In this report, we have presented a novel route to attach molecularly imprinted polymers (MIPs) on the surface of reduced graphene oxide (rGO) through covalent bonding. First, the surface of rGO was modified with maleic anhydride (MA) via a Diels-Alder reaction using a deep eutectic solvent (DES). Next, 3-propyl-1-vinylimidazolium molecular units were anchored and polymerized in the presence of ethylene glycol dimethacrylate (EGDMA) using chloramphenicol (CAP) as the template. Primarily, we investigated the effect of the molar ratio of individual precursors on the adsorption capacity of synthesized materials and accordingly fabricated the electrochemical sensor for CAP detection. Electrochemical results evidenced that the covalent bonding of MIP units enhanced the sensitivity of the respective sensor toward CAP in water as well as in real honey samples with high selectivity, stability, and reproducibility. This synthesis strategy involves the covalent binding of MIP on rGO materials via click chemisty under sonication power excluding harmful solvents and energy-intensive processes and thus could be a motivation for developing future electrochemical sensors through similar "green" routes.

Label free detection of multiple trace antibiotics with SERS substrates and independent components analysis

Surface enhanced Raman spectroscopy (SERS) has been widely studied and recognized as a powerful label-free technique for trace chemical analysis. However, its drawback in simultaneously identifying several molecular species has greatly limited its real-world applications. In this work, we reported a combination between SERS and independent component analysis (ICA) to detect several trace antibiotics which are commonly used in aquacultures, including malachite green, furazolidone, furaltadone hydrochloride, nitrofurantoin, and nitrofurazone. The analysis results indicate that the ICA method is highly effective in decomposing the measured SERS spectra. The target antibiotics could be precisely identified when the number of components and the sign of each independent component loading were properly optimized. With SERS substrates, the optimized ICA can identify trace molecules in a mixture at a concentration of 10^-6 M achieving the correlation values to the reference molecular spectra of 71-98%. Furthermore, measurement results obtained from a real-world sample demonstration could also be recognized as an important basis to suggest this method is promising for monitoring antibiotics in a real aquatic environment.

Photoelectrochemical biosensor based on DNA aptamers and dual nano-semiconductor heterojunctions for accurate and selective sensing of chloramphenicol

Nanosheets of anatase TiO₂ and CdS quantum dots modified with thioglycolic acid (TGA-CdS QDs) were prepared and hierarchically modified on the indium tin oxides (ITO) electrodes. The heterojunction structure is formed to improve the light capture ability and carrier migration, significantly enhancing the sensitivity of photoelectrochemical (PEC) biosensors. Specific DNA sequences labeled with TGA-CdS QDs were placed on the electrodes to prepare a biosensor for the detection of chloramphenicol with ultrahigh selectivity. In addition, the heterojunction structure and the principle of photocurrent signal amplification on the electrode are described in detail. Under the optimal conditions, the photoelectrochemical biosensors showed good reproducibility and stability for chloramphenicol with a linear response in the range 10-10,000 pM and a limit of detection (LOD) of 0.23 pM. Due to the specific recognition of base pairs, the sensor has excellent anti-interference ability in practical applications. An effective method was developed for the accurate detection of antibiotics with far reaching prospects.

Green, Cost-Effective Simultaneous Assay of Chloramphenicol, Methylparaben, and Propylparaben in Eye-Drops by Capillary Zone Electrophoresis

A green, cost-effective, and simple capillary zone electrophoresis (CZE) method was developed and validated for simultaneous determination of chloramphenicol, methylparaben, and propylparaben in eye-drops. With sodium tetraborate as background electrolyte (BGE), the apparent mobilities of chloramphenicol, methylparaben, and propylparaben increased and analysis time reduced when pH of BGE increased from 8.5 to 10.0 and concentration of BGE decreased from 40 mM to 15 mM, but complete separation of chloramphenicol from other matrix components was achieved only with sodium tetraborate concentration at 30 mM or higher and at pH = 9.3 or lower. The most suitable electrophoretic conditions for the intended application were a 30 mM sodium tetraborate solution, pH 9.3 as BGE, working voltage set at 25 kV, and UV detection at 280 nm at the cathodic extremity of the capillary. The final method was validated and proved to be reliable for assay of chloramphenicol, methylparaben, and propylparaben in eye-drops.

Magnetic nanoparticles assisted dispersive liquid-liquid microextraction of chloramphenicol in water samples

This work describes the development of a new methodology based on magnetic nanoparticles assisted dispersive liquid-liquid microextraction (DLLME-MNPs) for preconcentration and extraction of chloramphenicol (CAP) antibiotic residues in water. The approach is based on the use of decanoic acid as the extraction solvent followed by the application of MNPs to magnetically retrieve the extraction solvent containing the extracted CAP. The coated MNPs were then desorbed with methanol, and the clean extract was analysed using ultraviolet-visible spectrophotometry. Several important parameters, such as the amount of decanoic acid, extraction time, stirring rate, amount of MNPs, type of desorption solvent, salt addition and sample pH, were evaluated and optimized. Optimum parameters were as follows: amount of decanoic acid: 200 mg; extraction time: 10 min; stirring rate: 800 rpm; amount of MNPs: 60 mg; desorption solvent: methanol; salt: 10%; and sample pH, 8. Under the optimum conditions, the method demonstrated acceptable linearity (R ² = 0.9933) over a concentration range of 50-1000 µg l^-1. Limit of detection and limit of quantification were 16.5 and 50.0 µg l^-1, respectively. Good analyte recovery (91-92.7%) and acceptable precision with good relative standard deviations (0.45-6.29%, n = 3) were obtained. The method was successfully applied to tap water and lake water samples. The proposed method is rapid, simple, reliable and environmentally friendly for the detection of CAP.

Determination of Chloramphenicol, Thiamphenicol and Florfenicol in Chinese Gelatin Medicines using Dispersive Solid-Phase Extraction Coupled with Ultra High-Performance Liquid Chromatography-Mass Spectrometry

This study established a rapid and reliable method to determine chloramphenicol (CAP), thiamphenicol (TAP) and florfenicol (FF) residues in Chinese gelatin medicines. CAP, TAP and FF were extracted from medicine samples using 2% (v/v) ammonium hydroxide in acetonitrile. Trypsin was used to eliminate the matrix effect caused by protein components in gelatin medicines, whereas anhydrous sodium sulfate, C18-N and NH2-PSA adsorbents were applied to reduce matrix effect induced by other components. The analytical method of these drugs was optimized on ultra high-performance liquid chromatography-mass spectrometer (UHPLC-MS/MS) through the analysis of their standard linearity and regression. The optimized extraction and analytical method were validated in one Chinese gelatin medicine sample (Colla corii asini, E Jiao) with three fortification levels (2, 5 and 10 μg/kg), and the recoveries of these drug residues ranged of 87.6–102.7%. The limit of detection and quantification of CAP, TAP and FF in the sample were 0.2 and 0.5 μg/kg, 0.4 and 1.5 μg/kg, and 0.5 and 1.5 μg/kg, respectively. A total of 30 Chinese gelatin medicine samples were analyzed using the established method. No drug residues were found in these samples except for one Testudinis Carapacis et Plastri (1.67 μg/kg FF) and one turtle shell glue (2.55 μg/kg FF).

Porous SnO2 nanoparticles based ion chromatographic determination of non-fluorescent antibiotic (chloramphenicol) in complex samples

Nowadays, there are rising concerns about the extensive use of the antibiotics such as chloramphenicol (CAP), has threatened the human life in the form of various vicious diseases. The limited selectivity and sensitivity of confirmatory techniques (UV and electrochemical) and non-fluorescence property of CAP make its determination a challenging task in the modern pharmaceutical analysis. In order to redeem the selective, sensitive and cost-effective fluorescence methodology, here by the dual role of synthesized porous SnO2 nanoparticles were exploited; (i) a porous sorbent in a µ-QuEChERS based sample preparation and as (ii) a stimulant for the transformation of non-fluorescent analytes namely CAP and p-nitrophenol (p-NP) into their respective fluorescent product. We report a green, simple, selective and cost effective ion chromatographic method for CAP sensitive determination in three complex matrices including milk, human urine and serum. The synthesized sorbent not only selectively adsorbed and degraded the matrix/interferences but also selectively reduced the non-fluorescent antibiotic CAP into a fluorescent species. This developed ion chromatographic method exhibited good selectivity, linearity (r2 ≥ 0.996) and limit of detection (LOD) was in the range 0.0201-0.0280 µg/kg. The inter- and intraday precisions were also satisfactory having a relative standard deviation (RSDs) less than 14.96% and excellent recoveries of CAP in the range of 78.3-100.2% were retrieved in various complex samples.

Rapid surface enhanced Raman scattering detection method for chloramphenicol residues

Chloramphenicol (CAP) is a widely used amide alcohol antibiotics, which has been banned from using in food producing animals in many countries. In this study, surface enhanced Raman scattering (SERS) coupled with gold colloidal nanoparticles was used for the rapid analysis of CAP. Density functional theory (DFT) calculations were conducted with Gaussian 03 at the B3LYP level using the 3-21G(d) and 6-31G(d) basis sets to analyze the assignment of vibrations. Affirmatively, the theoretical Raman spectrum of CAP was in complete agreement with the experimental spectrum. They both exhibited three strong peaks characteristic of CAP at 1104 cm(-1), 1344 cm(-1), 1596 cm(-1), which were used for rapid qualitative analysis of CAP residues in food samples. The use of SERS as a method for the measurements of CAP was explored by comparing use of different solvents, gold colloidal nanoparticles concentration and absorption time. The method of the detection limit was determined as 0.1 μg/mL using optimum conditions. The Raman peak at 1344 cm(-1) was used as the index for quantitative analysis of CAP in food samples, with a linear correlation of R(2)=0.9802. Quantitative analysis of CAP residues in foods revealed that the SERS technique with gold colloidal nanoparticles was sensitive and of a good stability and linear correlation, and suited for rapid analysis of CAP residue in a variety of food samples.

Simultaneous determination of chloramphenicol, dexamethasone and naphazoline in ternary and quaternary mixtures by RP-HPLC, derivative and wavelet transforms of UV ratio spectra

The application of chemometrics-assisted UV spectrophotometry and RP-HPLC to the simultaneous determination of chloramphenicol, dexamethasone and naphazoline in ternary and quaternary mixtures is presented. The spectrophotometric procedure is based on the first-order derivative and wavelet transforms of ratio spectra using single, double and successive divisors. The ratio spectra were differentiated and smoothed using Savitzky-Golay filter; whereas wavelet transform realized with wavelet functions (i.e. db6, gaus5 and coif3) to obtain highest spectral recoveries. For the RP-HPLC procedure, the separation was achieved on a ZORBAX SB-C18 (150×4.6 mm; 5 μm) column at ambient temperature and the total run time was less than 7 min. A mixture of acetonitrile - 25 mM phosphate buffer pH 3 (27:73, v/v) was used as the mobile phase at a flow rate of 1.0 mL/min and the effluent monitored by measuring absorbance at 220 nm. Calibration graphs were established in the range 20-70 mg/L for chloramphenicol, 6-14 mg/L for dexamethasone and 3-8 mg/L for naphazoline (R(2)>0.990). The RP-HPLC and ratio spectra transformed by a combination of derivative-wavelet algorithms proved to be able to successfully determine all analytes in commercial eye drop formulations without sample matrix interference (mean percent recoveries, 97.4-104.3%).

Flow-injection preconcentration of chloramphenicol using molecularly imprinted polymer for HPLC determination in environmental samples

The residue of antibiotic chloramphenicol (CAP) is important issue for food quality control and also for the environmental monitoring. It is banned for use in food-producing animals and has very limited use in human medicine, because of its severe impact on human health. Determination of trace level of CAP in environmental samples requires a very sensitive analytical method and efficient preconcentration procedure. CAP can be efficiently preconcentrated in flow-injection system using flow-through reactor packed with molecularly imprinted polymer (MIP), but determination of CAP in eluate from MIP requires the application of chromatographic separation, which was made in reversed-phase HPLC system with UV detection. In optimized conditions the limit of detection for 100 mL sample in HPLC with offline preconcentration on MIP was evaluated as 0.66 mg/L. In hyphenated FIA-HPLC system with zone sampling the LOD for developed method was evaluated as 15 ng/L, which indicates the possibility of using it for analysis of environmental samples.