Flow-Based Methods with Chemiluminescence Detection for Food and Environmental Analysis: A Review

Fabrication of Ag nanostar and PEI-based SERS substrate for sensitive and rapid detection of SO2: Application for detection of sulfite residues in beer

Because of sulfite's potential toxicity, there is a growing concern about detecting and controlling its concentration in foods, alcoholic beverages, pharmaceuticals, and environmental samples to ensure public health. A branched polyethyleneimine-coated silver nano-star (AgNS@PEI) surface-enhanced Raman scattering (SERS) substrate was synthesized in this study for use as a sensitive, simple, rapid, stable, and reproducible non-destructible sulfite detection analytical technique. The seed morphology of the nano-star was created by using hydroxylamine (NH2OH) solution as a primary reducing agent, followed by a slow secondary reduction by trisodium citrate dihydrate (HOC(COONa)(CH2COONa)2 2H2O), resulting in the complete growth of the silver nano-star. For extra stability and selective absorption of sulfur dioxide from the headspace extraction of SO2 from sulfites, the nano-stars were thin coated with branched polyethyleneimine (b-PEI). The results showed that the thin-coated plasmonic substrates selectively absorb sulfur dioxide molecules, allowing sulfites in beer samples to be detected with a detection limit of 0.48 mg/L. Furthermore, the PEI-coated silver nano-star demonstrated increased stability and reproducibility, allowing for longer use of the substrate. Recovery experiments with recovery rates ranging from 95 to 112% and relative standard deviations ranging from 1.55 to 8.1% demonstrated that headspace extraction, selective SO2 absorption by the synthesized substrate, and subsequent SERS detections were reliable and valid for practical applications. Finally, this study developed an SO2-sensitive, selective, and robust Si@AgNS@PEI substrate for effective SERS detection and monitoring of sulfite levels in real-world environmental samples.

Detection of the freshness of rice by chemiluminescence

Reactive oxygen species (ROS) are usually produced in rice under aerobic environmental conditions, resulting in peroxidative changes in polyunsaturated fatty acids, and affecting the deterioration of rice during storage. In addition, as an important enzyme that participates in removing ROS, peroxidase is also present in rice, and takes part in protecting rice from attack by ROS. Moreover, loss of peroxidase activity may give rise to rice deterioration during storage. Therefore, measuring peroxidase activity makes it possible to ascertain the freshness of rice. In addition, peroxidase can also catalyze the luminol-hydrogen peroxide system. Based on this, in this work we established a new chemiluminescence (CL) method that was used to detect the freshness of stored rice. Under optimal experimental conditions, we showed that the freshness of rice can be measured using this CL method. This study is the first to detect the freshness of rice using a CL method, opening up a novel direction for the application of CL.

Transparent Cross-Flow Platform as Chemiluminescence Detection Cell in Cross Injection Analysis

This work presents the use of a transparent 'Cross Injection Analysis' (CIA) platform as a flow system for chemiluminescence (CL) measurements. The CL-CIA flow device incorporates introduction channels for samples and reagents, and the reaction and detection channels are in one acrylic unit. A photomultiplier tube placed above the reaction channel detects the emitted luminescence. The system was applied to the analysis of (i) Co(II) via the Co(II)-catalyzed H₂O₂-luminol reaction and (ii) paracetamol via its inhibitory effect on the catalytic activity of Fe(CN)₆^3- on the H₂O₂-luminol reaction. A linear calibration was obtained for Co(II) in the range of 0.002 to 0.025 mg L^-1 Co(II) (r² = 0.9977) for the determination of Co(II) in water samples. The linear calibration obtained for the paracetamol was 10 to 200 mg L^-1 (r² = 0.9906) for the determination of pharmaceutical products. The sample throughput was 60 samples h^-1. The precision was ≤4.2% RSD. The consumption of the samples and reagents was ca. 170 µL per analysis cycle.

Flow-Injection Methods in Water Analysis-Recent Developments

Widespread demand for the analysis and control of water quality and supply for human activity and ecosystem sustainability has necessitated the continuous improvement of water analysis methods in terms of their reliability, efficiency, and costs. To satisfy these requirements, flow-injection analysis using different detection methods has successfully been developed in recent decades. This review, based on about 100 original research papers, presents the achievements in this field over the past ten years. Various methodologies for establishing flow-injection measurements are reviewed, together with microfluidics and portable systems. The developed applications mostly concern not only the determination of inorganic analytes but also the speciation analysis of different elements, and the determination of several total indices of water quality. Examples of the determination of organic residues (e.g., pesticides, phenolic compounds, and surfactants) in natural surface waters, seawater, groundwater, and drinking water have also been identified. Usually, changes in the format of manual procedures for flow-injection determination results in the improvement of various operational parameters, such as the limits of detection, the sampling rate, or selectivity in different matrices.

Determination of organophosphate flame retardant tris(2-chloroethyl)phosphine based on the luminol-H2 O2 chemiluminescence system

Organophosphorus flame retardants (OPFRs) are new types of environmental pollutants, therefore the rapid and sensitive detection of OPFRs is a very important objective. A new experimental phenomenon was found in which tris(2-chloroethyl)phosphine (TCEP), a type of OPFR, could effectively enhance the signal of the luminol-H₂ O₂ chemiluminescence (CL) system. Combined with the controllability of flow injection analysis, a rapid, stable, and sensitive CL method was established. The CL intensity responded linearly to the concentration of TCEP in the range 0.5-100 μg/L (R²  = 0.999) with a low detection limit of 33 ng/L. Relative standard deviation (RSD) was 2.2% (n = 7, c = 100 μg/L). Water samples were labelled and recycled with RSDs of 1.1-5.7% and recoveries of 88.7-116.1%. Based on these results, this study established a new CL detection method for the environmental pollutant TCEP.

CuS nanoparticles-enhanced luminol-O2 chemiluminescence reaction used for determination of paracetamol and vancomycin

A new chemiluminescence (CL) method was proposed to measure two widely used drugs, including paracetamol (PCM) and vancomycin (VAN). The CL reaction used was the CuS nanoparticles (CuS NPs)-luminol-O₂ system. In this system, CuS NPs played the role of catalyst and increased the CL intensity. CuS NPs were easily synthesized by quick-precipitation. CuS NPs were characterized by spectroscopic techniques, and the mean size of NPs was estimated to be about 9 nm. In the developed CL methods, PCM and VAN decreased the CL intensity. In the proposed method, the linear concentration ranges were 4.0 × 10^-5-4.0 × 10^-4 mol L^-1 of PCM and 2.0 × 10^-5-6.0 × 10^-4 mol L^-1 of VAN. The limit of detections were 2.9 × 10^-5 mol L^-1 and 8.9 × 10^-6 mol L^-1 for PCM and VAN, respectively. The relative standard deviations (RSD) of the CL method were 2.99 and 4.31 (n = 6) for the determination of 3.0 × 10^-4 mol L^-1 PCM and VAN, respectively. It was also shown that the CL methods can measure PCM and VAN concentrations in various real samples.

Flow Injection Techniques for Tetracycline Quantification: A Review

The multiple therapeutic potentials of tetracycline and its worldwide usage have encouraged researchers to develop various methods for its assay in various matrices and for different purposes. In this regard, different analytical techniques have been exploited. Among those techniques is flow injection (FI), which is an extended family of three generations and five versions. The current manuscript reviews the utilization of FI techniques for developing assay methods for tetracycline. The review covers more than forty methods, since the inception of FI techniques and up to date. The review highlights the advantages of the application of FI techniques for quantification of tetracycline in terms of reagent consumption, sample frequency, accuracy, and practitioner safety, besides instrumentation simplicity and cost-effectiveness. The review also addresses applications to several matrices ranging from simple matrices such as standard solutions and pharmaceutical formulations to complex matrices such as biological fluids and food. Prior to the review, a brief background on the principles and developments of FI techniques is illustrated.

Green chemistry and coronavirus

The novel coronavirus pandemic has rapidly spread around the world since December 2019. Various techniques have been applied in identification of SARS-CoV-2 or COVID-19 infection including computed tomography imaging, whole genome sequencing, and molecular methods such as reverse transcription polymerase chain reaction (RT-PCR). This review article discusses the diagnostic methods currently being deployed for the SARS-CoV-2 identification including optical biosensors and point-of-care diagnostics that are on the horizon. These innovative technologies may provide a more accurate, sensitive and rapid diagnosis of SARS-CoV-2 to manage the present novel coronavirus outbreak, and could be beneficial in preventing any future epidemics. Furthermore, the use of green synthesized nanomaterials in the optical biosensor devices could leads to sustainable and environmentally-friendly approaches for addressing this crisis.

Acridone and acridinium constructs with red-shifted emission

Acridinium 9-carboxylic acid derivatives have been extensively used as chemiluminescent labels in diagnostic assays. Triggering acridinium with basic hydrogen peroxide produces a highly strained dioxetanone intermediate, which converts into an acridone in an electronically excited state and emits light at 420-440 nm. Here, we introduce a novel acridinium-fluorescein construct emitting at 530 nm, in which fluorescein is covalently attached to the acridinium N-10 nitrogen via a propyl sulfonamide linker. To characterize the spectral properties of the acridinium-fluorescein chemiluminophores, we synthesized the analogous acridone-fluorescein constructs. Both acridinium and acridone were linked to either 5- or 6-carboxyfluorescein and independently synthesized as individual structural isomers. Using fluorescent acridone-fluorophore tandems, we investigated and optimized the diluent composition to prevent dye aggregation. As monomolecular species, the acridone isomers demonstrated similar absorption, excitation, and emission spectra, as well as the expected fluorescence lifetimes and molecular brightness. Chemical triggering of acridinium-fluorescein tandems, as well as direct excitation of their acridone-fluorescein analogs, resulted in a nearly complete energy transfer from acridone to fluorescein. Acridone-based dyes can be studied with steady-state spectroscopy. Thus, they will serve as useful tools for structure and solvent optimizations, as well as for studying chemiluminescent energy transfer mechanisms in related acridinium-fluorophore tandems. Direct investigations of the light-emitting molecules generated in the acridinium chemiluminescent reaction empower further development of chemiluminescent labels with red-shifted emission. As illustrated by the two-color HIV model immunoassay, such labels can find immediate applications for multicolor detection in clinical diagnostic assays.

Flow injection-chemiluminescence determination of cetirizine dihydrochloride in pharmaceuticals using tris(2,2'-bipyridyl)ruthenium (II)-Ag(III) complex reaction

A simple and sensitive flow injection-chemiluminescence (FI-CL) method was developed for determination of cetirizine dihydrochloride (CTZH) in pharmaceuticals. The method is primarily based on the enhancement effect of CTZH on the tris(2,2'-bipyridyl)ruthenium (II)-diperiodatoargentate (III) ([Ru(bpy)₃ ]²⁺ -Ag(III) complex) CL system in an acidic medium. The optimum investigated variables of the CL reaction were: [Ru(bpy)₃ ]²⁺ , 50 × 10^-6 mol/L; sulfuric acid, 1.0 × 10^-3 mol/L; Ag(III) complex, 100 × 10^-6 mol/L; potassium hydroxide, 1.0 × 10^-3 mol/L; flow rate, 3.0 ml/min and sample loop volume, 300 μl. The detection and quantification limits were 2.0 × 10^-4 and 5.0 × 10^-4 mg/L (S/N of 3 and 10) respectively with a linear calibration range of 5.0 × 10^-4 to 7.5 mg/L (R² = 0.9999, n = 11), injection throughput of 110/h and the relative standard deviations of 1.5-3.5% over the range studied. The methodology was successfully applied to determine CTZH in different pharmaceutical samples and validated with a high-performance liquid chromatography method, and resulted in the recovery of 94.6-108.6%. The probable CL reaction mechanism is described in brief.

Determination of Nalbuphine Hydrochloride in Pharmaceutical Formulations Using Diperiodatoargentate(III)-Rhodamine-B Chemiluminescence System by Flow Injection Analysis

A novel method for the analysis of nalbuphine hydrochloride (NAL) is reported based on its enhancement effect on a diperiodatoargentate(III)-rhodamine-B (Ag(III) complex-Rh-B) chemiluminescence (CL) system in an aqueous sulfuric acid medium using flow-injection analysis (FIA). The optimal conditions of the CL reaction were: sulfuric acid, 10^-2 M; Ag(III) complex, 2.0 × 10^-4 M; Rh-B, 2.0 × 10^-5 M; Brij-35, 0.01%; sample loop volume, 300 μL; and flow rate, 3.0 mL/min/stream. The limit of detection (LOD) and limit of quantification (LOQ) were 0.001 and 0.003 mg/L (S/N = 3 and 10); linear calibration range, 5 × 10^-3 - 5.0 mg/L (R² = 0.9999) and injection throughput, 150/h. The relative standard deviation (RSD) was from 0.8 - 3.2% over the range studied. The suggested technique was applied for the determination of NAL in pharmaceutical injections, compared with a reported spectrophotometric method, and obtained results were found to be satisfactory. Based on spectrophotometric studies, the most probable mechanism of the CL reaction has been briefly described and drawn schematically.

Highly sensitive and selective non-enzymatic glucose detection based on indigo carmine/hemin/H2O2 chemiluminescence

Chemiluminescence of indigo carmine/glucose/hemin/H₂O₂ has been reported for the first time, and used for sensitive non-enzymatic detection of glucose and indigo carmine.

Current Issues in Antioxidant Measurement

The rationale and scope of the main issues of antioxidant measurement are presented, with basic definitions and terms in antioxidant research (such as reactive species and related antioxidative defenses, oxidative stress, and antioxidant activity and capacity) in a historical background. An overview of technical problems and expectations is given in terms of interpretation of results, precision and comparability of methods, capability of simulating physical reality, and analytical performance (sensitivity, selectivity, etc.). Current analytical methods for measuring antioxidant and antiradical activity are classified from various viewpoints. Reaction kinetics and thermodynamics of current analytical methods are discussed, describing physicochemical aspects of antioxidant action and measurement. Controversies and limitations of the widely used antioxidant assays are elaborated in detail. Emerging techniques in antioxidant testing (e.g., nanotechnology, sensors, electrochemistry, chemometry, and hyphenated methods) are broadly introduced. Finally, hints for the selection of suitable assays (i.e., preferable for a specific purpose) and future prospects are given.

Flow analysis with chemiluminescence detection: Recent advances and applications

This article highlights the most important developments in flow analysis with chemiluminescence (CL) detection, describing different flow systems that are compatible with CL detection, detector designs, commonly applied CL reactions and approaches to sample treatment. Recent applications of flow analysis with CL detection (focusing on outputs published since 2010) are also presented. Applications are classified by sample matrix, covering foods and beverages, environmental matrices, pharmaceuticals and biological fluids. Comprehensive tables are provided for each area, listing the specific sample matrix, CL reaction used, linear range, limit of detection and sample treatment for each analyte. Finally, recent and emerging trends in the field are also discussed.

A Flow Method for Chemiluminescence Determination of Antimony(III) and Antimony(V) Using a Rhodamine B-Cetyltrimethylammonium Chloride Reversed Micelle System Following On-Line Extraction

A rapid and sensitive flow method, based on the combination of on-line solvent extraction with reversed micellar mediated chemiluminescence (CL) detection using rhodamine B (RB), was developed for the determination of antimony(III) and antimony(V) in aqueous samples. The on-line extraction procedure involved ion-pair formation of the antimony(V) chloro-complex anion with the protonated RBH(+) ion and its extraction from an aqueous hydrochloric acid solution into toluene, followed by phase separation using a microporous membrane. When in a flow cell of a detector, the ion-pair in the extract driven was mixed with the reversed micellar solution of cetyltrimethylammonium chloride in 1-hexanol-cyclohexane/water (0.60 mol dm(-3) H2SO4) containing cerium(IV), its uptake by the reversed micelles and the subsequent CL oxidation of RB with Ce(IV) occurred easily, then the produced CL signal was measured. Using the proposed flow method under the optimized experimental conditions, a detection limit (DL) of 0.35 μmol dm(-3) and a linear calibration graph with a dynamic range from DL to 16 μmol dm(-3) were obtained for Sb(V) with a precision of 1.4% relative standard deviation (n = 5) at the Sb(V) concentration of 8.2 μmol dm(-3). The present method was successfully applied to the determination of Sb(V) in water samples and to the differential determination of Sb(III) and Sb(V) in copper electrolyte industrial samples, where total antimony Sb(III) + Sb(V) was determined after oxidation of Sb(III) to Sb(V) with Ce(IV) and Sb(III) was calculated by difference, for which the DL was almost the same as that for Sb(V).

Applications of capillary electrophoresis with chemiluminescence detection in clinical, environmental and food analysis. A review

This paper reviews the latest developments and analytical applications of chemiluminescence detection coupled to capillary electrophoresis (CE-CL). Different sections considering the most common CL systems have been included, such as the tris(2,2'-bipyridine)ruthenium(II) system, the luminol and acridinium derivative reactions, the peroxyoxalate CL or direct oxidations. Improvements in instrumental designs, new strategies for improving both resolution and sensitivity, and applications in different fields such as clinical, pharmaceutical, environmental and food analysis have been included. This review covers the literature from 2010 to 2015.

Recent advances in flow injection analysis

A dynamic development of methodologies of analytical flow injection measurements during four decades since their invention has reinforced the solid position of flow analysis in the arsenal of techniques and instrumentation of contemporary chemical analysis.

Recent developments in capillary and microchip electroseparations of peptides (2011-2013)

The review presents a comprehensive survey of recent developments and applications of capillary and microchip electroseparation methods (zone electrophoresis, ITP, IEF, affinity electrophoresis, EKC, and electrochromatography) for analysis, isolation, purification, and physicochemical and biochemical characterization of peptides. Advances in the investigation of electromigration properties of peptides, in the methodology of their analysis, including sample preseparation, preconcentration and derivatization, adsorption suppression and EOF control, as well as in detection of peptides, are presented. New developments in particular CE and CEC modes are reported and several types of their applications to peptide analysis are described: conventional qualitative and quantitative analysis, determination in complex (bio)matrices, monitoring of chemical and enzymatical reactions and physical changes, amino acid, sequence and chiral analysis, and peptide mapping of proteins. Some micropreparative peptide separations are shown and capabilities of CE and CEC techniques to provide relevant physicochemical characteristics of peptides are demonstrated.

Comparison of uric Acid quantity with different food in human urine by flow injection chemiluminescence analysis

Based on the inhibitory effect of uric acid (UA) on luminol-Co(2+) chemiluminescence (CL) system, a sensitive method for the determination of UA at nanomolar level by flow injection (FI) CL was proposed. The proposed method was successfully applied to real-time monitoring of UA excretion in human 24 h urine with different food intake, showing that meats, vegetables, and porridge intake caused differential UA excretions of 879, 798, and 742 mg, respectively. It was also found that UA concentrations in urine under the three kinds of food intake simultaneously reached maximum at 2 h after meals with the values of 417, 318, and 288 μg mL(-1), respectively. The UA concentration in human serum was also determined by this approach, and the possible mechanism of luminol-Co(2+)-UA CL reaction was discussed in detail.

Chemiluminescence detector based on a single planar transparent digital microfluidic device

We report on a compact and portable prototype of chemiluminescence detector based on a single planar single polar transparent electrowetting-on-dielectrics (EWOD) device. The coupling ground model was proposed to build the EWOD device, which could be driven under a single polar voltage. Such a design not only simplified the chip construction and control circuit, but also had the potential for the ball-like droplet to focus the fluorescence and enhance the detection sensitivity. Simulations and experiments both confirmed that the greater the contact angle, the stronger the detected optical signal, and thus the higher the sensitivity. The sensitivity of the prototype detector to H2O2 was 5.45 mV (mmol L(-1))(-1) and the detection limit was 0.01 mmol L(-1) when the contact angle of the EWOD surface was 120°. To further increase the sensitivity and decrease the detection limit, the contact angle of the EWOD device could be increased and the dark current of the photomultiplier decreased. The prototype shows potential applications as highly sensitive, cost effective and portable immuno-detectors, especially as a blood glucose monitor.

Development of a generic assay for the determination of total trihydroxybenzoate derivatives based on gold-luminol chemiluminescence

A selective assay for the determination of one of the most important class of phenolic compounds, namely trihydroxybenzoates (monomeric and polymeric compounds having at least one gallate moiety) based on their enhancing effect on the chemiluminogenic reaction between gold ions and luminol is described for the first time. In the presence of trihydroxybenzoate derivatives, the light emission generated when alkaline luminol is oxidized by gold ions is amplified several orders of magnitude compared to other common phenolic compounds which exhibit minor reactivity or no reactivity at all (e.g. hydroxycinnamates, flavonols, benzenediols). Based on this property, the experimental conditions were optimized in order to enable the determination of total trihydroxybenzoates in complex mixtures without resorting to separation techniques. The method was applied to samples of different composition (teas, herbal infusions and wines) with satisfactory analytical features yielding detection limits at the 10(-7) mol L(-1) level, intra-day precision of 3.1%, inter-day precision less than 10% and recoveries between 88.7 and 97.6%. The strengths and weaknesses of the method were identified and discussed in relation to its application in real samples.

Enhanced chemiluminescence of the luminol-hydrogen peroxide system by colloidal cupric oxide nanoparticles as peroxidase mimic

As a peroxidase mimic, cupric oxide nanoparticles were found to enhance the chemiluminescence (CL) of luminol-H(2)O(2) system up to 400 folds. The CL spectra and radical scavengers were conducted to investigate the possible CL enhancement mechanism. It was suggested that the enhanced CL could be attributed to the peroxidase-like activity of CuO nanoparticles, which effectively catalyzed the decomposition of hydrogen peroxide into hydroxyl radicals. The effects of the reactant concentrations and some organic compounds were also investigated. The proposed method could be used as a sensitive detection tool for hydrogen peroxide and glucose.