Determination of Tetracyclines by Solid-Phase Extraction with a Molecularly Imprinted Polymer and High-Performance Liquid Chromatography

Sodium Alginate-Aldehyde Cellulose Nanocrystal Composite Hydrogel for Doxycycline and Other Tetracycline Removal

A novel composite hydrogel bead composed of sodium alginate (SA) and aldehyde cellulose nanocrystal (DCNC) was developed for antibiotic remediation through a one-step cross-linking process in a calcium chloride bath. Structural and physical properties of the hydrogel bead, with varying composition ratios, were analyzed using techniques such as BET analysis, SEM imaging, tensile testing, and rheology measurement. The optimal composition ratio was found to be 40% (SA) and 60% (DCNC) by weight. The performance of the SA-DCNC hydrogel bead for antibiotic remediation was evaluated using doxycycline (DOXY) and three other tetracyclines in both single- and multidrug systems, yielding a maximum adsorption capacity of 421.5 mg g^-1 at pH 7 and 649.9 mg g^-1 at pH 11 for DOXY. The adsorption mechanisms were investigated through adsorption studies focusing on the effects of contact time, pH, concentration, and competitive contaminants, along with X-ray photoelectron spectroscopy analysis of samples. The adsorption of DOXY was confirmed to be the synergetic effects of chemical reaction, electrostatic interaction, hydrogen bonding, and pore diffusion/surface deposition. The SA-DCNC composite hydrogel demonstrated high reusability, with more than 80% of its adsorption efficiency remaining after five cycles of the adsorption-desorption test. The SA-DCNC composite hydrogel bead could be a promising biomaterial for future antibiotic remediation applications in both pilot and industrial scales because of its high adsorption efficiency and ease of recycling.

An Update on the Use of Molecularly Imprinted Polymers in Beta-Blocker Drug Analysis as a Selective Separation Method in Biological and Environmental Analysis

Beta-blockers are antihypertensive drugs and can be abused by athletes in some sport competitions; it is therefore necessary to monitor beta-blocker levels in biological samples. In addition, beta-blocker levels in environmental samples need to be monitored to determine whether there are contaminants from the activities of the pharmaceutical industry. Several extraction methods have been developed to separate beta-blocker drugs in a sample, one of which is molecularly imprinted polymer solid-phase extraction (MIP-SPE). MIPs have some advantages, including good selectivity, high affinity, ease of synthesis, and low cost. This review provides an overview of the polymerization methods for synthesizing MIPs of beta-blocker groups. The methods that are still widely used to synthesize MIPs for beta-blockers are the bulk polymerization method and the precipitation polymerization method. MIPs for beta-blockers still need further development, especially since many types of beta-blockers have not been used as templates in the MIP synthesis process and modification of the MIP sorbent is required, to obtain high throughput analysis.

Preparation and performance analysis of monodisperse glycidyl methacrylate modified restricted access media-imprinted materials

Using monodisperse poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) as the matrix, and pefloxacin template molecules, a novel restricted-access medium molecularly imprinted polymers with Bovine serum albumin crosslinked on its surface was prepared through reversible addition fragmentation chain-transfer polymerization. Then, the obtained material was employed in dispersive solid-phase extraction to analyze the fluoroquinolones in untreated egg samples by HPLC-UV detection. Adsorption performance revealed a good binding amount (40.72 mg/g), fast binding kinetics (25 min), satisfactory selectivity and good ability to eliminate matrix interference. The Reusability experiments indicated the materials has good reusable performance after repeated. Under the optimised conditions, restricted access media-molecularly imprinted polymers-dispersive solid phase extraction was combined with HPLC-UV to enrich fluoroquinolones in untreated eggs, good limit of detection (1.31-3.15 μg/L) and high recovery (89.5%-96.8%) were obtained. The results showed that the prepared restricted-access material is promising for direct detection of antibiotics in complex samples. This article is protected by copyright. All rights reserved.

Tetracyclines in the environment: An overview on the occurrence, fate, toxicity, detection, removal methods, and sludge management

Tetracyclines (TCs) are a group of broad-spectrum antibiotics having vast human, veterinary, and aquaculture applications. The continuous release of TCs residues into the environment and the inadequate removal through the conventional treatment systems result in its prevalent occurrence in soil, surface water, groundwater, and even in drinking water. As aqueous TCs contamination is the tip of the iceberg, and TCs possess good sorption capacity towards soil, sediments, sludge, and manure, it is insufficient to rely on the sorptive removal in the conventional water treatment plants. The severity of the TCs contamination is evident from the emergence of TCs resistance in a wide variety of microorganisms. This paper reviews the recent research on the TCs occurrence in the environmental matrices, fate in natural systems, toxic effects, and the removal methods. The high performance liquid chromatography (HPLC) determination of TCs in environmental samples and the associated technology developments are analyzed. The benefits and limitations of biochemical and physicochemical removal processes are also discussed. This work draws attention to the inevitability of proper TC sludge management. This paper also gives insight into the limitations of TCs related research and the future scope of research in environmental contamination by TCs residues.

Toxicological analyses: analytical method validation for prevention or diagnosis

The need for reliable results in Toxicological Analysis is recognized and required worldwide. The analytical validation ensures that a method will provide trustworthy information about a particular sample when applied in accordance with a predefined protocol, being able to determine a specific analyte at a distinct concentration range for a well-defined purpose. The driving force for developing method validation for bioanalytical projects comes from the regulatory agencies. Thus, the approach of this work is to present theoretical and practical aspects of method validation based on the analysis objective, whether for prevention or diagnosis. Although various legislative bodies accept differing interpretations of requirements for validation, the process for applying validation criteria should be adaptable for each scientific intent or analytical purpose.

Direct doping analysis of beta-blocker drugs from urinary samples by on-line molecularly imprinted solid-phase extraction coupled to liquid chromatography/mass spectrometry

The hydrophilic layer forms hydrogen bonds with water, minimizing the interference of this solvent in the analyte–polymer complex.

Restricted access molecularly imprinted polymers obtained by bovine serum albumin and/or hydrophilic monomers’ external layers: a comparison related to physical and chemical properties

RAMIP-BSA is the best material for sample preparation in terms of selectivity, protein exclusion, and adsorption.