Comparison of Cobalt Hexacyanoferrate and Poly(Neutral Red) Modified Carbon Film Electrodes for the Amperometric Detection of Heavy Metals Based on Glucose Oxidase Enzyme Inhibition

Determination of hydroquinone in beverages using colorimetric and electrochemical sensors on paper-based device

Hydroquinone (HQ) is a phenolic compound used in industry processes. We aim to demonstrate a rapid and simple procedure for the determination of HQ. This work has developed two techniques, including colorimetric and electrochemical sensors on paper-based devices. Firstly, we have developed the colorimetric detection for the rapid screening test of HQ using 1.5% 4-(dimethylamino) benzaldehyde with alkaline condition (5 M NaOH). Under suitable conditions, the calibration curve between the intensity and HQ concentration was in the range of 50-500 mg L-1. Then, we developed a multi-walled carbon nanotube/graphene oxide/copper/palladium/platinum (MWCNT/GO/Cu/Pd/Pt) onto a screen-printed carbon electrode (SPCE). The optimal amount of MWCNT/GO/Cu/Pd/Pt nanomaterial is 2 mg for HQ detection. The linear concentration range was found in the range 1 to 20 mg L-1 and a detection limit was found to be 0.40 mg L-1 (3.6 µM) for HQ. Moreover, the proposed device can be applied to determine HQ in real samples and is inexpensive technique, portable, and low consumer time.

An overview of Structured Biosensors for Metal Ions Determination

The determination of metal ions is important for nutritional and toxicological assessment. Atomic spectrometric techniques are highly efficient for the determination of these species, but the high costs of acquisition and maintenance hinder the application of these techniques. Inexpensive alternatives for metallic element determination are based on dedicated biosensors. These devices mimic biological systems and convert biochemical processes into physical outputs and can be used for the sensitive and selective determination of chemical species such as cations. In this work, an overview of the proposed biosensors for metal ions determination was carried out considering the last 15 years of publications. Statistical data on the applications, response mechanisms, instrumentation designs, applications of nanomaterials, and multielement analysis are herein discussed.

High Cadmium Levels in Cured Meat Products Marketed in Nigeria - Implications for Public Health

Heavy metals are known to disrupt important physiological processes in living cells, and have been responsible for various pathological conditions with possible contributions to cancer development. Food contamination have been identified as one of the ways humans are exposed to heavy metals. In developing countries like Nigeria, the regulatory framework for enforcing compliance with globally acceptable exposure to deleterious contaminants is poor. In the current study, thirteen samples of cured meat products of diverse origin marketed in South-west Nigeria were evaluated for lead, cadmium, chromium and nickel contents using the atomic absorption spectroscopy technique. All the samples analysed contained cadmium between 0.35 and 1.20 ppm, levels considered higher than acceptable limits in consumable products. Lead, chromium and nickel were not detected in any of the samples. As known cumulative poisons, there is the need for stringent regulatory control of these heavy metals in cured meat products imported into or produced indigenously in the country in order to minimize the risks to public health.

Rapid amperometric detection of trace metals by inhibition of an ultrathin polypyrrole-based glucose biosensor

A sensitive and reliable inhibitive amperometric glucose biosensor is described for rapid trace metal determination. The biosensor utilises a conductive ultrathin (55 nm thick) polypyrrole (PPy) film for entrapment of glucose oxidase (GOx) to permit rapid inhibition of GOx activity in the ultrathin film upon exposure to trace metals, resulting in reduced glucose amperometric response. The biosensor demonstrates a relatively fast response time of 20s and does not require incubation. Furthermore, a complete recovery of GOx activity in the ultrathin PPy-GOx biosensor is quickly achieved by washing in 2mM EDTA for only 10s. The minimum detectable concentrations achieved with the biosensor for Hg(2+), Cu(2+), Pb(2+) and Cd(2+) by inhibitive amperometric detection are 0.48, 1.5, 1.6 and 4.0 µM, respectively. Also, suitable linear concentration ranges were achieved from 0.48-3.3 µM for Hg(2+), 1.5-10 µM for Cu(2+), 1.6-7.7 µM for Pb(2+) and 4-26 µM for Cd(2+). The use of Dixon and Cornish-Bowden plots revealed that the suppressive effects observed with Hg(2+) and Cu(2+) were via non-competitive inhibition, while those of Pb(2+) and Cd(2+) were due to mixed and competitive inhibition. The stronger inhibition exhibited by the trace metals on GOx activity in the ultrathin PPy-GOx film was also confirmed by the low inhibition constant obtained from this analysis. The biosensor was successfully applied to the determination of trace metals in tap water samples.