Detection of the red tide-causing planktonAlexandrium affineby a piezoelectric immunosensor using a novel method of immobilizing antibodies

A review of the current and emerging detection methods of marine harmful microalgae

In recent years, the scale and frequency of outbreaks of harmful algal blooms (HABs) have increased year by year due to the intensification of seawater eutrophication and global climate change. HABs have become a global marine ecological and environmental problem, which poses a serious threat to human health, marine ecological security, and economic development. The establishment of detection technology for harmful microalgae is fundamental to the early warning and prevention of HABs. To date, several detection methods have been developed for harmful microalgae, they however lack a unified classification standard. It is difficult to use a reasonable mix of all the developed methods to improve the accuracy of detection results. Here, all of the established detection methods for harmful microalgae were reviewed, including morphological structure-based detection methods, cytochrome-based detection techniques, immunoassays, and nucleic acid-based detection methods. The principles, advantages, and weaknesses of these methods were highlighted. Their application in the detection of harmful microalgae was summarized. Overall, different detection methods are suitable for different purposes. Further development of more accurate, cost-effective, efficient, and rapid detection technology is required in the future. This review is expected to provide a reference for research related to the monitoring of marine environment, early warning of HABs, and the molecular identification of harmful microalgae.

Antibody immobilization techniques in mass sensitive immunosensor: enhanced sensitivity through limited mass load

Background:

Biosensors are analytical devices that include a sample-delivery approach between a biological recognition element and a transducer required to convert the physicochemical change produced from the interaction of biological molecules-receptor interaction into signal. The immunosensor is a special type of biosensors that includes an antibody as a biorecognition element to detect analyte as antigens. In mass-sensitive sensors, antigen-antibody interactions can be specified by measuring the frequency change and most commonly knowns are surface acoustic wave, bulk acoustic wave, quartz crystal microbalance and microcantilevers.

Methods:

Different methods for antibody immobilization including functionalization of the transducer surface with specific groups have been reported for antibody immobilization. This stage affects the limit of detection and overall performance. In this review, perspectives on immobilization strategies of mass sensitive immunosensors according to transducer types will be presented. The choice of immobilization methods and their impact on performance in terms of capture molecule loading, orientation and signal improvement is will also be discussed.

Results:

One of the most critical point during configuration of the biorecognition layer is to improve the sensitivity. Therefore, we initially focused on comparisons of the antibody immobilization strategies in the biorecognition layer in terms of mass load level and high sensitivity.

Conclusion:

The lack of significant data on the mass accumulations up to the functionalization and antibody immobilization steps, which are the basis of immusensor production, has been identified. However, mass sensitive immunosensors have the potential to become more common and effective analytical devices for many application areas.

Mixotrophic ability of the phototrophic dinoflagellates Alexandrium andersonii, A. affine, and A. fraterculus

The dinoflagellate Alexandrium spp. have received much attention due to their harmful effects on diverse marine organisms, including commercially important species. For minimizing loss due to red tides or blooms of Alexandrium spp., it is very important to understand the eco-physiology of each Alexandrium species and to predict its population dynamics. Its trophic mode (i.e., exclusively autotrophic or mixotrophic) is one of the most critical parameters in establishing prediction models. However, among the 35 Alexandrium species so far described, only six Alexandrium species have been revealed to be mixotrophic. Thus, mixotrophic ability of the other Alexandrium species should be explored. In the present study, whether each of three Alexandrium species (A. andersonii, A. affine, and A. fraterculus) isolated from Korean waters has or lacks mixotrophic ability, was investigated. When diets of diverse algal prey, cyanobacteria, and bacteria sized micro-beads were provided, A. andersonii was able to feed on the prasinophyte Pyramimonas sp., the cryptophyte Teleaulax sp., and the dinoflagellate Heterocapsa rotundata, whereas neither A. affine nor A. fraterculus fed on any prey item. Moreover, mixotrophy elevated the growth rate of A. andersonii. The maximum mixotrophic growth rates of A. andersonii on Pyramimonas sp. under a 14:10h light/dark cycle of 20μEm^-2s^-1 was 0.432d^-1, while the autotrophic growth rate was 0.243d^-1. With increasing mean prey concentration, the ingestion rate of A. andersonii increased rapidly at prey concentrations <650ngCml^-1 (ca. 16,240 cellsml^-1), but became saturated at the higher prey concentrations. The maximum ingestion rate by A. andersonii of Pyramimonas sp. was 1.03ngC predator^-1d^-1 (25.6 cells predator^-1d^-1). This evidence suggests that the mixotrophic ability of A. andersonii should be taken into consideration in predicting the outbreak, persistence, and decline of its harmful algal blooms.

Whole-cell sensing for a harmful bloom-forming microscopic alga by measuring antibody--antigen forces

Aureococcus anophagefferens, a harmful bloom-forming alga responsible for brown tides in estuaries of the Middle Atlantic U.S., has been investigated by atomic force microscopy for the first time, using probes functionalized with a monoclonal antibody specific for the alga. The rupture force between a single monoclonal antibody and the surface of A. anophagefferens was experimentally found to be 246 +/- 11 pN at the load rate of 12 nN/s. Force histograms for A. anophagefferens and other similarly-sized algae are presented and analyzed. The results illustrate the effects of load rates, and demonstrate that force-distance measurements can be used to build biosensors with high signal-to-noise ratios for A. anophagefferens. The methods described in this paper can be used, in principle, to construct sensors with single-cell resolution for arbitrary cells for which monoclonal antibodies are available.

A new approach for immobilization of oligonucleotides onto piezoelectric quartz crystal for preparation of a nucleic acid sensor for following hybridization

The aim of this study is to develop a nucleic acid sensor based on piezoelectric crystal microbalance system (QCM) for following hybridization. Piezoelectric quartz crystal surfaces were first treated in a glow-discharge apparatus with ethylene diamine (EDA) plasma at 15 W (discharge power), 2.5 min (incubation time) and 35 ml/min (monomer flow rate) to create amino groups on the crystal surfaces. The thickness of the EDA-plasma film formed was about 43+/-24 A. Then, the amino groups on the crystal surfaces were converted to aldehyde groups by reacting the amino groups with glutaraldehyde (GA) at different conditions. A GA concentration of 2.5% and an incubation time of 2 h were selected as optimal values at this step, corresponding to a GA surface concentration of about 270 ng/cm2. A double strand Oligonucleotides, having one extra base on 5'-end of one of the complementary strands, were immobilized through the amino groups of this base onto the GA-modified crystals. Optimal immobilization conditions were as follows: oligonucleotide concentration: 1 microg/ml; time: 3 h; pH: 9.2 carbonate buffer; ionic strength: 0.1; and temperature: 20 degrees C. The QCM sensor carrying the covalently bound strand was used in the hybridization experiments, which showed that equilibrium is achieved in about 5 min, and the frequency shift measured is related to the concentration of the target strand to be measured within the medium.

Glow-discharge treated piezoelectric quartz crystals as immunosensors for HSA detection

The aim of this study is to develop an immunoaffinity sensor based on piezoelectric crystals for human serum albumin (HSA) detection in aqueous media. Quartz crystals were treated with ethylene diamine (EDA) plasma in a glow-discharge apparatus in order to substitute amino groups on their surfaces. Then anti-HSA antibodies were immobilized via these amino groups by using glutaraldehyde (GA) as cross-linker. Immobilization of the antibody on the quartz crystal was examined for different pH, antibody concentration and treatment time. The optimum conditions for anti-HSA immobilization were evaluated by the measurements of the activity of the surface against HSA. The optimum values of pH, antibody concentration and treatment time were found 6.2, 0.15 mg/ml and 2 h, respectively. For detection of HSA into the solution, two methods were used. In the first (dip and dry) method, the frequency shifts were measured in air after the 1 h interaction of the anti-HSA immobilized crystals with HSA solution. In the other (direct) method, the frequency shifts were followed continuously for 60 min. while the probe was immersed in the HSA solution. An increase for the frequency shifts was observed with increasing of HSA concentration of 16-128 microg/ml. Both the immobilization and antibody-interaction conditions were found important on the extend of these specific interaction. The relations between the HSA concentrations and frequency shifts were exponential in both methods.

Human cytomegalovirus detection by a quartz crystal microbalance immunosensor

A piezoelectric affinity sensor has been developed to detect distinctive antigens of the human cytomegalovirus. Either the specific antibodies or the antigen were immobilized on the gold electrode. To develop a rapid immunoassay, various assay formats were tested in relation with the different antigen composition. First, a direct assay was carried out immobilizing the specific antibody on the crystal surface by passive adsorption. Next, Protein A, thiol/poly L-lysine mixed self-assembled monolayers were tested as methods of gold modification. A competitive format was exploited by immobilization of the antigen onto the crystal activated by SAM and poly L-lysine. This procedure yielded a preliminary calibration curve. A linear range between 2.5 and 5 µg/ml of gB epitope in solution and a detection limit of 1 µg/ml were measured.

Surface plasmon resonance-based immunoassays

Surface plasmon resonance (SPR) has been successfully incorporated into an immunosensor format for the simple, rapid, and nonlabeled assay of various biochemical analytes. Proteins, complex conjugates, toxins, allergens, drugs, and pesticides can be determined directly using either natural antibodies or synthetic receptors with high sensitivity and selectivity as the sensing element. Immunosensors are capable of real-time monitoring of the antigen-antibody reaction. A wide range of molecules can be detected with lower limits ranging between 10(-9) and 10(-13) mol/L. Several successful commercial developments of SPR immunosensors are available and their web pages are rich in technical information. This review highlights many recent developments in SPR-based immunoassay, functionalizations of the gold surface, novel receptors in molecular recognition, and advanced techniques for sensitivity enhancement. Furthermore, it describes the challenge of current problems and provides some insights toward the future technologies.