Simple assembly of graphene oxide functionalized with tannic acid on membranes to enhance dye removal

Enhanced filtration membranes with graphene oxide and tannic acid for textile industry wastewater dye removal

A novel modification technique employing a layer-by-layer (LbL) self-assembly method, integrated with a pressure-assisted filtration system, was developed for enhancing a commercial polyethersulfone (PES) microfiltration (MF) membrane. This modification involved the incorporation of tannic acid (TA) in conjunction with graphene oxide (GO) nanosheets. The effectiveness of the LbL method was confirmed through comprehensive characterization analyses, including ATR-FTIR, SEM, water contact angle (WCA), and mean pore size measurements, comparing the modified membrane with the original commercial one. Sixteen variations of PES MF membranes were superficially modified using a three-factorial design, with the deposited amount of TA and GO as key factors. The influence of these factors on the morphology and performance of the membranes was systematically investigated, focusing on parameters such as pure water permeability (PWP), blue corazol (BC) dye removal efficiency, and flux recovery rate (FRR). The membranes produced with the maximum amount of GO (0.1 mg, 0.55 wt%) and TA as the inner and outer layers demonstrated remarkable FRR and significant BC removal, exceeding 80%. Notably, there was no significant difference observed when using either 0.2 (1.11 wt%) or 0.4 mg (2.22 wt%) in the first layer, as indicated by the Tukey mean test. Furthermore, the modified membrane designated as MF/TA0.4GO0.1TA0.4 was evaluated in the filtration of a simulated dye bath wastewater, exhibiting a BC removal efficiency of 49.20% and a salt removal efficiency of 27.74%. In conclusion, the novel PES MF membrane modification proposed in this study effectively enhances the key properties of pressure-driven separation processes.

Evaluation of hydrochar from peach stones for caffeine removal from aqueous medium and treatment of a synthetic mixture

The presence of micropollutants, such as caffeine (CAF), has been detected throughout the world, since conventional treatment plants are not able to properly degrade them. CAF is a widely consumed stimulant, and has been demanding the development of efficient methodologies for its removal. Aiming at the agriculture waste valorization, a new hydrochar was developed based on chemical and thermal modification of peach stones (mod-PS) for CAF removal from water and from a synthetic mixture. The morphology, functional groups and surface electrical charge of the adsorbent were characterized by SEM, FTIR and zeta potential, respectively. Regarding CAF adsorption performance, the equilibrium time was reached at 480 min and the pseudo-second-order model presented the best fit for the experimental data. The maximum adsorption capacity was 68.39 mg g-1 (298 K) and the Langmuir model exhibited a better fit for the isothermal data. The thermodynamic properties confirmed that the process was exothermic, spontaneous and reversible. The main adsorption mechanisms were hydrogen bonds and π-interactions. The global removal efficiency was satisfactory in the synthetic mixture simulating real wastewater (67%). Therefore, the proposed new hydrochar has potential application as a low-cost adsorbent for CAF removal.