Repeated-Dose and Reproductive Toxicity of the Ultraviolet Absorber 2-(3′,5′-Di-tert-butyl-2′-hydroxyphenyl)-5-chlorobenzotriazole in Rats

Benzotriazole ultraviolet stabilizers in the environment: A review of occurrence, partitioning and transformation

Benzotriazole ultraviolet stabilizers (BUVSs) are widely used as industrial additives to protect products from photoaging and are present in a variety of environmental matrices and organisms. It raised significant concerns that BUVSs are emerging pollutants with persistence, bioaccumulation and toxicity, of which 2-(3, 5-di-tert-amyl-2-hydroxyphenyl) benzotriazole (UV-328) has been recently listed in Annex A of the Stockholm Convention Persistent Organic Pollutants (POPs) list. A comprehensive understanding of the occurrence, partitioning and transformation of BUVSs in the environment is the basis for their environmental exposure and risk studies. However, the occurrence, partitioning and transformation of BUVSs are scarcely reviewed. In this paper, the environmental occurrence of BUVSs in various matrices, including water-suspended particulate matter and sediment, soil and dust, sludge, as well as biota, were summarized. Solid matrices and organisms are predominant reservoirs for BUVSs rather than waters, but there is a lack of systematical summary on the sorption/partitioning studies of BUVSs in abiotic phases and organisms. This paper analyzed and reviewed the possible sorption/partitioning processes and mechanisms. It was found that the partitioning is dependent on the hydrophobicity of BUVSs, environmental conditions and the organic carbon contents, and the bioaccumulation is also biota-species dependent. To further assess the potential risks of BUVSs, more progress has been made in the study of transformation of BUVSs. Focusing on the most important transformation processes in the environment, involving photodegradation, chemical degradation, biodegradation and metabolism in biota, the probable transformation pathways and mechanisms of BUVSs were summarized. It was emphasized that the hydrophobicity and toxicity of metabolites should not be overlooked. Finally, the future research direction was prospected from contaminant remediation and health risk perspectives. This paper provides fundamental knowledge of the environmental behavior of BUVSs, and will facilitate the research of environmental exposure and risk assessment of BUVSs.

Contamination of ultraviolet absorbers in food: toxicity, analytical methods, occurrence and risk assessments

Ultraviolet (UV) absorbers are chemical substances that are widely used as defenses against the damaging effects of solar radiations. UV absorbers, despite their benefits, are categorized as emerging pollutants because they have been demonstrated to be mutagenic, toxic, pseudo-persistent, bio-accumulative, and to have strong estrogenic effects. Because of their common use in personal care products, they continue to enter the environment. Several food samples, particularly those derived from aquatic sources, have been found to be contaminated with these compounds. Toxic effects on aquatic life, such as metabolic imbalance and developmental toxicity, result from the continued presence of UV absorbers in aquatic bodies. In addition, the degree of exposure to these pollutants in foods should be examined because there are certain risks associated with their consumption by humans. Therefore, this review focuses on the toxicity, analytical techniques, occurrence, and risk assessments of UV absorbers found in food.

Benzotriazole UV stabilizers (BUVs) as an emerging contaminant of concern: a review

Benzotriazole UV stabilizers (BUVs) are a group of industrial chemicals used in various consumer products and industrial applications. Due to its large-scale production and use, BUVs have been detected in all environmental matrices. Humans are exposed to BUVs from environmental media, food, personal care products (PCPs), and consumer products. As a result, BUVs are detected in human breast milk, attracting researchers and regulatory bodies worldwide. BUVs such as UV-328 exhibit the characteristics of persistent organic pollutants (POPs); hence, it has been recently listed under Stockholm Convention POP list. The current review focuses on the occurrence of BUVs in the environment with emphasis on persistency, bioaccumulation, and toxicity (PBT). Scarcity of scientific data on BUVs' properties, environmental occurrence, exposure levels, and effects on organisms poses significant challenges to the policymakers and regulatory bodies in adopting management strategies. The need for a science-based integrated framework for risk assessment and management of BUVs is recommended. Considering the potential threat of BUVs to human health and the environment, it is recommended that BUVs should be taken as a subject of priority research. Studies on the degradation and transformation route of BUVs need to be explored for the sound management of BUVs.

Development and Validation of a DLLME-GC-MS-MS Method for the Determination of Benzotriazole UV Stabilizer UV-327 and Its Metabolites in Human Blood

2-(5-Chloro-benzotriazol-2-yl)-4,6-di-(tert-butyl)phenol (UV-327) is used as an ultraviolet (UV) absorber in plastic materials and coatings. To investigate its metabolism and to assess human exposure, analytical methods are necessary for the determination of UV-327 and its metabolites in human biological specimens. The method thus presented targets the determination of UV-327 and several of its predicted metabolites in blood using protein precipitation, dispersive liquid-liquid microextraction (DLLME) and derivatization. The trimethylsilylated analytes and internal standards are separated by gas chromatography and analyzed with tandem mass spectrometry. The DLLME procedure was optimized with respect to the type and volume of disperser and extraction solvents, the pH value of the sample solution and the addition of salt. During method development, an effective ex vivo lactone/hydroxyl carboxylic acid interconversion was observed for two metabolites, each containing a carboxyl group adjacent to the phenolic hydroxyl group. The analytes resulting from interconversion enabled a more sensitive and reliable determination of the metabolites compared to their native structures. Method validation revealed limits of detection between 0.02 and 0.36 µg/L. The mean relative recovery rates ranged from 91% to 118%. Precision and repeatability were demonstrated by relative standard deviations in the range of 0.6-14.2% and 1.1-13.7%, respectively. The presently described procedure enables the sensitive and robust analysis of UV-327 and its metabolites in human blood and allows the elucidation of the human UV-327 metabolism as well as the assessment of exposure in potentially exposed individuals.

Human metabolism and excretion kinetics of benzotriazole UV stabilizer UV-327 after single oral administration

UV-327 (2-(5-chloro-benzotriazol-2-yl)-4,6-di-(tert-butyl)phenol) is used as an ultraviolet (UV) absorber in plastic products and coatings. Due to its ubiquitous distribution in the environment, human exposure is conceivable. In the study presented herein, initial information on the human in vivo metabolism of UV-327 was obtained by single oral administration to three volunteers. Urine and blood samples were collected up to 72 h after exposure. One study participant additionally donated plasma samples. Maximum blood and plasma levels of UV-327 and its two monohydroxylated metabolites UV-327-6-mOH and UV-327-4-mOH were reached 6 h post-exposure. Almost the entire amount found in blood and plasma samples was identified as UV-327, whereas the two metabolites each accounted for only 0.04% of the total amount, indicating that UV-327 is well-absorbed from the intestine, but only partially metabolized. Plasma to blood ratios of UV-327, UV-327-6-mOH, and UV-327-4-mOH ranged from 1.5 to 1.6. Maximum urinary excretion rates of UV-327, UV-327-6-mOH, UV-327-4-mOH, and UV-327-4 + 6-diOH were reached 9-14 h post-exposure. However, only about 0.03% of the orally administered dose of UV-327 was recovered as UV-327 and its metabolites in urine, indicating that biliary excretion may be the major route of elimination of UV-327 and its hydroxylated metabolites. The present study complements the insight in the complex absorption, distribution, metabolism, and elimination (ADME) processes of benzotriazole UV stabilizers (BUVSs).

Identification and quantification of additive-derived chemicals in beached micro-mesoplastics and macroplastics

Although marine plastic debris are expected to retain various chemical additives, little is known about the additives that are retained. We conducted a screening analysis of additives in 261 macroplastic and micro-mesoplastic debris from two beaches. We detected 52 chemicals-antioxidants, phthalates, ultraviolet stabilizers, hindered amine light stabilizers, and flame retardants-and quantified the concentrations of 15 of them. Comparison of the concentrations of Irgafos 168, an antioxidant stabilizer, among sample categories indicated that leaching had occurred from micro-mesoplastics. Differences in diffusion rates between polymer types may explain faster leaching from polyethylene than polypropylene. The significant amounts of Irgafos 168 retained in even micro-mesoplastics indicated the importance of plastics as a vector of additives. This study provides fundamental data needed to assess the risks to organisms from exposure to plastic additives and to understand the effect of stabilizers on the aging behavior of marine plastics.

Human health and ecological risk assessment of 98 pharmaceuticals and personal care products (PPCPs) detected in Indian surface and wastewaters

The release of pharmaceuticals and personal care products (PPCPs) in environmental waters has become an urgent issue due to their pseudo-persistent traits. The present study was undertaken to conduct a screening-level risk assessment of 98 PPCPs, detected in different water matrices (treated wastewater, surface water, and groundwater) of India, for evaluating ecological risk (risk to fish, daphnia, and algae), human health risk, and antimicrobial resistance (AMR) selection risk by following risk quotient (RQ) based methodology. In the present study, 47% of the detected PPCPs in Indian waters were found to exert a possible risk (RQ > 1) to either aquatic species and human health, or cause AMR selection risk. 17 out of 25 antibiotics detected in the environmental waters were found to pose a threat of AMR selection. 11 out of 49 pharmaceuticals were found to exert human health risk from ingesting contaminated surface water, whereas only 2 pharmaceuticals out of 25 were found to exert risk from the intake of groundwater. Very high RQs (>1000) for few pharmaceuticals were obtained, signifying a great potential of the detected PPCPs in causing severe health concern, aquatic toxicity, and AMR spread. Within India, special attention needs to be given to the pharmaceutical hubs, as the environmental waters in these regions were found to be severely contaminated with drug residues resulting in extremely high RQs. The present study will be helpful in prioritizing the detected PPCPs in the environmental waters of India, for which immediate attention and enforceable guidelines are required.

Phenolic benzotriazoles: a class comparison of toxicokinetics of ultraviolet-light absorbers in male rats

Phenolic benzotriazoles are ultraviolet-light absorbers used in a variety of industrial and consumer applications. We investigated the toxicokinetic behaviour of 9 compounds, covering unsubstituted, monosubstituted, disubstituted, and trisubstituted compounds, following a single gavage (30 and 300 mg/kg) and intravenous (IV) (2.25 mg/kg) administration in male rats.Following IV administration, no distinct pattern in plasma elimination was observed for the compounds with half-lives ranging from 15.4-84.8 h. Systemic exposure parameters, maximum concentration (C_max) and area under the concentration time curve (AUC), generally increased with the degree of substitution.Following gavage administration, C_max and AUC of unsubstituted compound were lower compared to the substituted compounds. C_max and AUC increased ≤7-fold with a 10-fold increase in the dose except for the AUC of the unsubstituted compound where the increase was 30-fold. Plasma elimination half-lives for the class ranged from 1.57 to 192 h with the exception of 30 mg/kg drometrizole.Oral bioavailability was low with ∼ 6% estimated for unsubstituted compound and 12.8-23% for others at 30 mg/kg dose. Bioavailability was lower following administration of the higher dose.Taken collectively, these data point to low oral absorption of phenolic benzotriazoles. The absorption decreased with increasing dose. Substituted compounds may be less metabolized compared to the unsubstituted.

Identification of in vitro phase I metabolites of benzotriazole UV stabilizer UV-327 using HPLC coupled with mass spectrometry

The benzotriazole UV stabilizer (BUVS) 2-(5-chloro-benzotriazol-2-yl)-4,6-di-(tert-butyl)phenol (UV-327) is used in various plastic products to protect them against harmful UV radiation. Meanwhile, there are concerns about potential adverse health effects on humans, as residues of UV-327 and other BUVSs have already been detected in various environmental matrices. However, information on the metabolism of UV-327 is not yet available. Therefore, in vitro experiments with human liver microsomes (HLMs) were performed in order to identify phase I metabolites to be used as specific biomarkers of exposure in biomonitoring studies. The samples were analyzed by HPLC coupled with mass spectrometry (HPLC/MS). Potential metabolites, which were formed by hydroxylation and further oxidation to carboxylic acid, were tentatively identified. Special metabolite structures were suspected and custom-synthesized as reference substances for verification. In total, seven phase I metabolites, which may be suitable biomarkers for the assessment of exposure to UV-327, have been identified and quantified. The results of the present study provide initial insights into the metabolic pathway of UV-327, which is essential for further research on its human metabolism.

Piece-by-piece analysis of additives and manufacturing byproducts in plastics ingested by seabirds: Implication for risk of exposure to seabirds

The risk of marine organisms ingesting plastics has become a growing concern due to hazard chemicals in plastics. To identify compounds to which seabirds potentially have substantial exposure, 194 plastics fragments and pellets ingested by seabirds, i.e., northern fulmars from the Faroe Islands, and laysan albatross and black-footed albatross from Mukojima Island, were analyzed piece by piece. Four kinds of UV stabilizers, 2 brominated flame retardants, and styrene oligomers were detected at detection frequencies of 4.6%, 2.1%, and 2.1%, respectively. Concentrations ranging from not detected (n.d.) - 1700 μg/g were measured for UV stabilizers, n.d. - 1100 μg/g for flame retardants, and n.d. - 3200 μg/g for styrene oligomers. We found that these chemicals could be retained in plastics during drifting and fragmentation in the ocean and transported to seabirds. This type of transport via plastics can be direct pathway that introduces hazardous compounds to marine organisms.

Monitoring and environmental risk assessment of benzotriazole UV stabilizers in the sewage and coastal environment of Gran Canaria (Canary Islands, Spain)

Benzotriazole UV stabilizers (BUVSs) are emerging contaminants that are widely used in personal care products, such as cosmetics and sunscreens, to absorb ultraviolet light. These compounds have been described as bioaccumulative, pseudo-persistent and toxic; therefore, it is of great importance to investigate them and determine their presence and distribution in the environment. In this research, we performed a two-year monitoring study to identify six BUVS compounds (UV-P, UV-326, UV-327, UV-328, UV-329 and UV-360) in different environmental compartments from Gran Canaria (Canary Islands, Spain): influent and effluent from five wastewater treatment plants (WWTPs) and seawater and sediment samples from three marine areas influenced by sewage outfalls discharges from WWTPs. Two methods based on on-line solid-phase extraction and microwave-assisted extraction coupled with ultra-high-performance liquid chromatography with mass spectrometry detection were applied to quantify the analytes in liquid and solid samples, respectively. The target BUVSs were measured in sewage, coastal seawater and sediment samples in concentrations in the ranges of 13.12-1933 ng L^-1, 67.01-2419 ng L^-1 and 4.42-2162 ng kg^-1 dry weight, respectively. The studied compounds exhibited different trends of occurrence in aqueous and solid samples due to their different coefficients of hydrophobicity. The majority of the positive samples belonged to the most touristic sampling location of the island. The estimated hazard quotient, HQ, revealed no risk from the target compounds at the measured concentrations levels.

Initial hazard assessment of benzyl salicylate: In vitro genotoxicity test and combined repeated-dose and reproductive/developmental toxicity screening test in rats

Benzyl salicylate is used as a fragrance ingredient and an ultraviolet light absorber, but its toxicity is unknown. Therefore, toxicity tests and hazard classification were conducted for screening assessment under the Japanese Chemical Substances Control Law. Benzyl salicylate was found to be non-genotoxic in vitro based on the chromosomal aberration test using Chinese hamster lung cells. However, the combined repeated-dose and reproductive/developmental screening toxicity test, in which male and female rats were administered benzyl salicylate by gavage at 0, 30, 100, or 300 mg/kg/day for 42 and 41-46 days, respectively, from 14 days before mating until postnatal Day 4, showed that repeated doses had major effects on the thymus, liver, epididymis, and femur at 100 and/or 300 mg/kg/day. Furthermore, although benzyl salicylate had no effect on the estrus cycle, fertility, corpus lutea, or implantation rate, embryonic resorption, offspring mortality, and neural tube defects were observed at 300 mg/kg/day, and the offspring had lower body weights at 30 and 100 mg/kg/day, suggesting teratogenicity similar to other salicylates. Based on the developmental toxicity, this chemical was classified as hazard class 2, with a lowest observed adverse effect level (LOAEL) of 30 mg/kg/day and a D-value of 0.003 mg/kg/day.

Benzotriazole-type ultraviolet stabilizers and antioxidants in plastic marine debris and their new products

Ultraviolet stabilizers (UVSs) and antioxidants are the most widely used additives in plastics to enhance the lifetime of polymeric materials. There is growing interest in the roles of plastic marine debris and microplastics as source or vector of toxic substances to marine environment and organisms. However, there is limited information available on plastic associated chemicals, particularly additive chemicals. Therefore, to evaluate their extent of exposure from plastics to the marine environment, we determined UVSs and antioxidants in plastic debris (n=29) collected from beaches along with their corresponding new plastic products in markets (n=27) belonging to food, fisheries, and general use. Antioxidants were present at higher concentrations than UVSs in both plastic debris and new plastics, indicative of their high use over UVSs. Irganox 1076 and Irganox 1010 were more commonly used than other chemicals investigated. The irregular use with high concentration of additive chemicals was observed in short-term use plastic products. Except for Irganox 1076 and UV 326, most antioxidants and UVSs were relatively high in new plastics compared to corresponding plastic marine debris, implying their potential leaching or degradation during use or after disposal. The present study provides quantitative information about additive chemicals contained in plastic marine debris and their new products. These results could be useful for better understanding of environmental exposure to hazardous chemicals through plastic pollution.

Geotextile composition, application and ecotoxicology-A review

Geosynthetics is the umbrella term for thin, flexible material sheets applied in civil and environmental engineering, of which geotextiles form the largest group. Most geotextiles consist of a polymer from the polyolefin, polyester or polyamide family, and additives to improve their stability. The polymer may degrade into microplastic particles over time and under various conditions and can cause adverse effects, as species may ingest these particles or encounter adverse effects due to the interference of the particles with e.g. their photosynthesis system in the case of algae. Leaching of additives may occur from the intact material, as they are often not covalently bound to the polymer backbone, but is greatly enhanced when micro-sized plastic particles have been formed. A total of 42 polymer additives were identified, of which 26 had ecotoxicity information available in terms of a REACH persistence, toxicity and bioaccumulation (PBT) assessment. Of these, 15 were classified as (very) persistent and 2 as toxic. A survey to assess potential toxicity of the remaining 16 substances revealed that no ecotoxicity studies had been performed on 13 of these compounds. For 3 compounds, other toxicity data was found, as well as of several chemical groups known to be used as additives in geotextiles. The current knowledge is thus lacking in two domains: on the one hand, ecotoxicity data is scarce as many substances have not yet been the subject of ecotoxicological studies. On the other hand, in situ toxic effects might be missed by the current approach of single compound toxicity testing. Moreover, environmental occurrence data of the additives are extremely scarce.

Qualitative Analysis of Additives in Plastic Marine Debris and Its New Products

Due to their formulation and/or processing, plastics contain additives and impurities that may leach out under conditions of use and accumulate in the environment. To evaluate their role as vectors of chemical contaminants in marine environment, plastic debris (n = 19) collected from coastal beaches along with new plastics (n = 25; same or same brand) bought from local markets were screened by gas chromatography-mass spectrometry in full scan mode. Detected peaks were identified using NIST library in different polymers (polypropylene (PP) > polyethylene (PE) > PP + PE > polyethyl terephthalate > poly(acylene:styrene) with different use (food, fishery, and general use). A database on the presence of 231 different chemicals were grouped into hydrocarbons, ultra-violet (UV)-stabilizers, antioxidants, plasticizers, lubricants, intermediates, compounds for dyes and inks, flame retardants, etc. The UV326, UV327, UV328, UV320, UvinualMC80, irganox 1076, DEHP, antioxidant no 33, di-n-octylisophthalate, diisooctyl phthalate, hexanoic acid 2-ethyl-hexadecyl ester, and hydrocarbons were most frequently detected. Finding of toxic phthalates and UV stabilizers in those products having moisture contact (like bottles with short use) raised concern to humans and indicated their irregular use. The comparison between new and debris plastics clearly indicated the leaching and absorption of chemicals and supports our assumption of plastic as media for transferring these additives in marine environment.

Concentration of organic sun-blocking agents in seawater of beaches and coral reefs of Okinawa Island, Japan

The concentration of UV filters (UVFs) and UV light stabilizers (UVLSs) were measured in seawater and river water collected from sites at four beaches, two reefs, and one river on Okinawa Island, Japan. UVFs and/or UVLSs of 8-10 types were detected in beaches samples and 6-9 types were detected in reef samples. The total UVF concentrations at the beach sites were highest either in July or August with a maximum of 1.4 μg L(-1). The concentrations at the reef sites did not show peaks in summer and the maximum values were close to 10 ng L(-1). The detected UVF profiles reflected the ingredients of sunscreens used in each region. The highest UVLS concentrations at the reefs were observed not only in summer but also in June and September. The UVLS concentrations at the reefs were similar to or even higher than that at the beaches or in the river.

Asia-Pacific mussel watch for emerging pollutants: Distribution of synthetic musks and benzotriazole UV stabilizers in Asian and US coastal waters

We analyzed 68 green and blue mussels collected from Cambodia, China, Hong Kong, India, Indonesia, Japan, Korea, Malaysia, Philippines, Vietnam and the USA during 2003 and 2007, to elucidate the occurrence and widespread distributions of emerging pollutants, synthetic musks and benzotriazole UV stabilizers (BUVSs) in Asia-Pacific coastal waters. Synthetic musks and BUVSs were detected in mussels from all countries, suggesting their ubiquitous contamination and widespread distribution. High concentrations of musks and BUVSs were detected in mussels from Japan and Korea, where the levels were comparable or greater than those of PCBs, DDTs and PBDEs. Significant correlations were found between the concentrations of HHCB and AHTN, and also between the concentrations of UV-327 and UV-328, which suggest similar sources and compositions of these compounds in commercial and industrial products. To our knowledge, this is the first study of large-scale monitoring of synthetic musks and BUVSs in Asia-Pacific coastal waters.

Occurrence and profiles of organic sun-blocking agents in surface waters and sediments in Japanese rivers and lakes

Sun-blocking agents including eight UV filters (UVF) and 10 UV light stabilizers (UVLS) were measured in water and sediment collected from 22 rivers, four sewage treatment plant effluents (STPE) and three lakes in Japan. Total sun blocking agents levels ranged from N.D. to 4928 ng/L and from 2.0 to 3422 μg/kg dry wt in surface water and in sediment, respectively. Benzyl salicylate, benzophenone-3, 2-ethyl hexyl-4-methoxycinnamte (EHMC) and octyl salicylate were dominant in surface water receiving wastewater effluents and STPE, although UV-328, benzophenone and EHMC were dominant in other surface water except background sites. Three UVF and nine UVLS were observed from all sediment and their compositions showed similar patterns with UV-328 and UV-234 as the most prevalent compounds. Homosalate, octocrylene, UV-326, UV-327, UV-328 and UV-234 were significantly correlated with Galaxolide® in sediments. Concentrations of UV-327 and UV-328 also had strong correlation between those of UV-326 in sediment.

Disappearance of gender-related difference in the toxicity of benzotriazole ultraviolet absorber in juvenile rats

2-(2'-hydroxy-3',5'-di-tert-butylphenyl)benzotriazole (HDBB) is an ultraviolet absorber used in plastic resin products, such as building materials and automobile components. In oral repeated dose toxicity studies using 5- or 6-week-old rats, this chemical induced hepatic histopathological changes, such as hypertrophy accompanied with eosinophilic granular changes and focal necrosis of hepatocytes, and male rats showed nearly 25 times higher susceptibility to the toxic effects than females. Castration at approximately 4 weeks of age markedly reduced the sex-related variation in HDBB toxicity, but some difference, less than five times, remained between male and female castrated rats. Following oral HDBB administration to male and female juvenile rats from postnatal days 4-21, such gender-related difference in toxic susceptibility was not detected; therefore, it is speculated that the determinants of susceptibility to HDBB toxicity are differentiated between sexes after weaning. In young rats given HDBB, there was no gender-related difference in plasma HDBB concentration, and no metabolites were detected in the plasma of either sex. HDBB induced lauric acid 12-hydroxylase activity in the liver and this change was more pronounced in males than in females. These findings indicate that HDBB could show hepatic peroxisome proliferation activity, and the difference in the susceptibility of male and female rats to this effect might lead to marked gender-related differences in toxicity.

Occurrence and concentrations of benzotriazole UV stabilizers in marine organisms and sediments from the Ariake Sea, Japan

The benzotriazole UV stabilizers, which are used in a variety of plastic products, were analyzed in marine organisms and sediments collected from the Ariake Sea, Japan. The UV stabilizers, such as UV-320, UV-326, UV-327, and UV-328 were detected in all of the samples analyzed, suggesting the production and use of these compounds in Japan. High concentrations of UV stabilizers were found in clams, oysters, and gastropods collected from the tidal flat at concentrations on the order of several hundreds of ng/g on a lipid weight (wt.) basis. The higher trophic species, such as hammerhead sharks and coastal birds, accumulated UV stabilizers, with mean concentrations of 190 ng/g and 74 ng/g (lipid wt.), respectively. These results indicate that benzotriazole UV stabilizers are persistent and bioaccumulative in the marine food-chains. The benzotriazole UV stabilizers were also detected in coastal and river sediments around the Ariake Sea, at concentrations in the range of 7.9-720 ng/g (dry weight basis). Significant correlations were found between concentrations of UV stabilizers and organic carbon content in sediments, implying adsorption of these compounds to organic matter. To our knowledge, this is the first report of ubiquitous contamination and bioaccumulation of benzotriazole UV stabilizers in the marine environment.