Removal of Cu(II), Fe(III), and Cr(III) from Aqueous Solution by Aniline Grafted Silica Gel

A dithizone-anchored silica gel surface, {SiO2}@DZ for the selective sample cleanup of Gd(iii) amidst Fe(iii), Th(iv), and Ce(iv) employing ion pair complexation

Sorption–desorption equilibration, {extractor-HOMO}:{H₃O}⁺ + {metal-species}ⁿ⁺ ⇄ {extractor-HOMO}:{metal-species}ⁿ⁺ + {H₃O}⁺, an eventual ion-pair complexation controlled by {H₃O}⁺.

Biosorption of dysprosium (III) using raw and surface-modified bark powder of Mangifera indica: isotherm, kinetic and thermodynamic studies

In this paper, we have used HDTMA-Br- and NaOH-treated bark powder of Mangifera indica as bio-sorbents for the removal of dysprosium (III) from its aqueous solution. The adsorption process was investigated at different experimental parameters such as contact time, temperature, pH, adsorbent dose, and initial metal concentration. The amount of chemically modified bark powder required was almost two times lesser than raw bark to get a higher percentage removal of the metal ion. The kinetics results revealed the adsorption process follows the nonlinear form a pseudo-second-order model. The negative values of Gibbs free energy change (∆G°) indicated the spontaneity of the adsorption process. The enthalpy change (∆H°) and entropy change (∆S°) of adsorption were 60.97 kJ/mol and 0.48 J/mol K, respectively signified it as an endothermic process. The maximum adsorption capacity was found to be 55.04 mg/g for sorption of Dy (III) on NaOH-treated bark powder and was better fitted to Langmuier model. It was confirmed to follow physisorption process and the activation energy of the system was found to be 41.07 kJ/mol. The possibility of adsorbent and adsorbate interactions were indicated by the FTIR and SEM/EDX analysis.

Conversion of Eragrostis plana Nees leaves to activated carbon by microwave-assisted pyrolysis for the removal of organic emerging contaminants from aqueous solutions

Eragrostis plana Nees leaves, abundant lignocellulosic biomass, was used as carbon source for preparation of activated carbon, by using microwave-assisted pyrolysis and chemical activation. The novel activated carbon (MWEPN) was characterised by FTIR, CHN elemental analysis, Boehm's titration method, TGA, SEM, N₂ adsorption/desorption curves and pH of the point of zero charge (pH_pzc). Afterwards, the adsorbent was successfully employed for adsorption of the two emerging contaminants (caffeine and 2-nitrophenol). The results indicated that MWEPN had a predominantly mesoporous structure with a high surface area of 1250 m² g^-1. FTIR analysis indicated the presence of carbonyl, hydroxyl and carboxylic groups on the surface of MWEPN. The Boehm analysis showed the existence of the high amount of acid moieties on the surface of activated carbon. Adsorption kinetic indicated that the system followed the Avrami fractional order at the optimal pH of 7. The equilibrium time was attained at 30 min. The Liu isotherm model better described the isothermal data. Based on the Liu isotherm, the maximum sorption capacities (Q_max) of caffeine and 2-nitrophenol adsorbed onto activated carbon at 25 °C were 235.5 and 255.8 mg g^-1, respectively.

Adsorption of heavy metals from aqueous solutions by Mg-Al-Zn mingled oxides adsorbent

In our study, Mg-Al-Zn mingled oxides were prepared by the co-precipitation method. The structure, composition, morphology and thermal stability of the synthesized Mg-Al-Zn mingled oxides were analyzed by powder X-ray diffraction, Fourier transform infrared spectrometry, N₂ physisorption, scanning electron microscopy, differential scanning calorimetry and thermogravimetry. Batch experiments were performed to study the adsorption behavior of cobalt(II) and nickel(II) as a function of pH, contact time, initial metal ion concentration, and adsorbent dose. The maximum adsorption capacity of Mg-Al-Zn mingled oxides for cobalt and nickel metal ions was 116.7 mg g^-1, and 70.4 mg g^-1, respectively. The experimental data were analyzed using pseudo-first- and pseudo-second-order kinetic models in linear and nonlinear regression analysis. The kinetic studies showed that the adsorption process could be described by the pseudo-second-order kinetic model. Experimental equilibrium data were well represented by Langmuir and Freundlich isotherm models. Also, the maximum monolayer capacity, q_max, obtained was 113.8 mg g^-1, and 79.4 mg g^-1 for Co(II), and Ni(II), respectively. Our results showed that Mg-Al-Zn mingled oxides can be used as an efficient adsorbent material for removal of heavy metals from industrial wastewater samples.

Adsorption of Procion Blue MX-R dye from aqueous solutions by lignin chemically modified with aluminium and manganese

A macromolecule, CML, was obtained by purifying and carboxy-methylating the lignin generated from acid hydrolysis of sugarcane bagasse during bioethanol production from biomass. The CMLs complexed with Al(3+) (CML-Al) and Mn(2+) (CML-Mn) were utilised for the removal of a textile dye, Procion Blue MX-R (PB), from aqueous solutions. CML-Al and CML-Mn were characterised using Fourier transform infrared spectroscopy (FTIR), scanning differential calorimetry (SDC), scanning electron microscopy (SEM) and pHPZC. The established optimum pH and contact time were 2.0 and 5h, respectively. The kinetic and equilibrium data fit into the general order kinetic model and Liu isotherm model, respectively. The CML-Al and CML-Mn have respective values of maximum adsorption capacities of 73.52 and 55.16mgg(-1) at 298K. Four cycles of adsorption/desorption experiments were performed attaining regenerations of up to 98.33% (CML-Al) and 98.08% (CML-Mn) from dye-loaded adsorbents, using 50% acetone+50% of 0.05molL(-1) NaOH. The CML-Al removed ca. 93.97% while CML-Mn removed ca. 75.91% of simulated dye house effluents.

Application of cupuassu shell as biosorbent for the removal of textile dyes from aqueous solution

The cupuassu shell (Theobroma grandiflorum) which is a food residue was used in its natural form as biosorbent for the removal of C.I. Reactive Red 194 and C.I. Direct Blue 53 dyes from aqueous solutions. This biosorbent was characterized by infrared spectroscopy, scanning electron microscopy, and nitrogen adsorption/desorption curves. The effects of pH, biosorbent dosage and shaking time on biosorption capacities were studied. In acidic pH region (pH 2.0) the biosorption of the dyes were favorable. The contact time required to obtain the equilibrium was 8 and 18 h at 298 K, for Reactive Red 194 and Direct Blue 53, respectively. The Avrami fractionary-order kinetic model provided the best fit to experimental data compared with pseudo-first-order, pseudo-second-order and chemisorption kinetic adsorption models. The equilibrium data were fitted to Langmuir, Freundlich, Sips and Radke-Prausnitz isotherm models. For both dyes the equilibrium data were best fitted to the Sips isotherm model.

Biosorption of Cadmium onto Pseudomonas fluorescens: Application of Isotherm and Kinetic Models

The present study was undertaken to evaluate the feasibility of Pseudomonas fluorescens biomass for the removal of cadmium ions from aqueous solutions. Batch experiments were performed to study the adsorption of cadmium on pH, Pseudomonas fluorescens biomass adsorbent with respect to initial Cd(II) concentration, contact time and biomass dose. The experimental data were modeled by Langmuir and Freundlich isotherm models. Langmuir model resulted in the best fit of the adsorption data. The maximum adsorption capacity for Cd(II) was 66.25 mg/g (pH 5.0 and 5 g/L biomass dose). Kinetics of adsorption followed second-order rate equations. The FTIR results of Pseudomonas fluorescens biomass showed that biomass has different functional groups and these functional groups are able to react with metal ion in aqueous solution. The results of the present study suggest that Pseudomonas fluorescens biomass can be used beneficially in treating industrial effluents containing heavy metal ions.

Pecan nutshell as biosorbent to remove Cu(II), Mn(II) and Pb(II) from aqueous solutions

In the present study we reported for the first time the feasibility of pecan nutshell (PNS, Carya illinoensis) as an alternative biosorbent to remove Cu(II), Mn(II) and Pb(II) metallic ions from aqueous solutions. The ability of PNS to remove the metallic ions was investigated by using batch biosorption procedure. The effects such as, pH, biosorbent dosage on the adsorption capacities of PNS were studied. Four kinetic models were tested, being the adsorption kinetics better fitted to fractionary-order kinetic model. Besides that, the kinetic data were also fitted to intra-particle diffusion model, presenting three linear regions, indicating that the kinetics of adsorption should follow multiple sorption rates. The equilibrium data were fitted to Langmuir, Freundlich, Sips and Redlich-Peterson isotherm models. Taking into account a statistical error function, the data were best fitted to Sips isotherm model. The maximum biosorption capacities of PNS were 1.35, 1.78 and 0.946mmolg(-1) for Cu(II), Mn(II) and Pb(II), respectively.

Synthesized layered inorganic-organic magnesium organosilicate containing a disulfide moiety as a promising sorbent for cations removal

A new-layered inorganic-organic magnesium organosilicate was synthesized through a single step template sol-gel route under mild conditions, using a new alkoxysilane, containing a 2-aminophenyldisulfide molecule. Elemental analysis data based on the nitrogen atom showed an incorporation of 1.97mmol of organic pendant groups for each gram of the hybrid formed. The X-ray diffraction patterns demonstrated that this nanocompound exhibited lamellar structure, in agreement with that found for natural inorganic silicates. Infrared spectroscopy and nuclear magnetic resonance for the (29)Si nucleus in the solid state are in agreement with the success of the proposed synthetic method. The presence of nitrogen and sulfur basic centers attached to the pendant groups inside the lamellar structure is used as basic centers to coordinate cations from aqueous solution at the solid/liquid interface. The isotherms were fitted to Langmuir and Freundlich models. The maxima adsorption capacities for copper, lead and cadmium, calculated from Langmuir model, were 3.28, 1.42 and 0.35mmol g(-1), respectively. These values are comparable to other adsorbing nanomaterials. This behavior suggested that this new inorganic-organic hybrid could be employed as a promising adsorbent for cation removal from polluted systems.

Methylene blue biosorption from aqueous solutions by yellow passion fruit waste

The yellow passion fruit (Passiflora edulis Sims. f. flavicarpa Degener) (YPFW) a powdered solid waste, was tested as biosorbent for the removal of a cationic dye, methylene blue (MB), from aqueous solutions. Adsorption of MB onto this low-cost natural adsorbent was studied by batch adsorption at 25 degrees C. The effects of shaking time, biosorbent dosage and pH on adsorption capacity were studied. In alkaline pH region the adsorption of MB was favorable. The contact time required to obtain the maximum adsorption was 48 h at 25 degrees C. Four kinetic models were tested, being the adsorption kinetics better fitted to pseudo-first order and ion exchange kinetic models. The ion exchange and pseudo-first order constant rates were 0.05594 and 0.05455 h(-1), respectively. The equilibrium data were fitted to Langmuir, Freundlich, Sips and Redlich-Peterson isotherm models. Taking into account the analysis of the normal distribution of the residuals (difference of q(measured)-q(model)), the data were best fitted to Sips isotherm model. The maximum amount of MB adsorbed on YPFW biosorbent was 44.70 mg g(-1).