Determination and Optimization of Flavonoid and Extract Yield from Brown Mango using Response Surface Methodology

Ultrasound-assisted extraction conditions optimisation using response surface methodology from Mitragyna speciosa (Korth.) Havil leaves

The optimisation of the Ultrasound-Assisted Extraction (UAE) method was investigated by employing the Central Composite Rotatable Design (CCRD) of Response Surface Methodology (RSM). The UAE method was based on a simple ultrasound treatment using methanol as the extraction medium to facilitate the cell disruption of Mitragyna speciosa leaves for optimum extraction yield and Total Phenolic Content (TPC). Three different parameters comprising extraction temperature (X1: 25-50 °C), sonication time (X2: 15-50 min), and solvent to solid ratio (X3: 10-30 mL/g), and were selected as the independent variables, while two response variables were selected, namely extraction yield (Y1) and TPC (Y2). Based on the results, the developed quadratic polynomial model correlated with the experimental data is based on the coefficient of determination (R2) of extraction yield (0.9972, p < 0.0001) and TPC (0.9553, p < 0.0001). At 25 °C, 15 min sonication time, and 10 mL/g of solvent to solid ratio, the optimal conditions recorded an extraction yield and TPC of 22.69% and 143.51 mg gallic acid equivalent (GAE)/g, respectively. Furthermore, the actual response and the predicted values of the developed models correlated with each other as the Residual Standard Error (RSE) values were <5%. Meanwhile, the Liquid Chromatography- tandem Mass Spectrometry (LC-MS/MS) was employed to characterise the optimised M. speciosa extract and revealed the presence of major phytochemicals, including catechin, rutin, kaempferol, coumarin, gallic acid, chlorogenic acid, and caffeic acid. These compounds could exhibit certain therapeutic effects, such as anti-inflammatory, antibacterial, and antioxidant. Therefore, the findings in this study supported the suggestion that the various available bioactive compounds besides alkaloids contributed to the bioactive properties in M. speciosa, making it an effective traditional herbal medicine to treat various illnesses.

Preventive Effect of Flavonoid Extract from the Peel of Gonggan (Citrus reticulata Blanco Var. Gonggan) on CCl4-Induced Acute Liver Injury in Mice

Objective

Citrus peel, a waste product of citrus consumption and processing, is rich in flavonoids. This study aimed to study the protective effect of flavonoid extract from the peel of gonggan (Citrus reticulata Blanco var. gonggan) on acute chemical liver injury.

Materials and Methods

We established a chemical liver injury model induced by carbon tetrachloride (CCl₄) in mice. The flavonoid composition in gonggan (Citrus reticulata Blanco var. gonggan) peel was detected by HPLC. The histopathological sections of liver, related biochemical indicators in serum and liver, and related genes were examined to evaluate the protective effect of gonggan peel flavonoid extract (GPFE).

Results

The results showed that GPFE contained narirutin, hesperidin, nobiletin, tangeretin, and 5-demethylnobiletin. After 14 days of intragastric administration of GPFE, the result showed GPFE could reduce the increase in liver index, serum alanine aminotransferase (ALT), and aspartate transaminase (AST) levels caused by CCl₄. At the same time, pathological sections of liver confirmed that GPFE alleviated the damage to liver tissue. Moreover, biochemical indicator results showed that GPFE increased the activities of superoxide dismutase (SOD) and catalase (CAT) in liver tissue and reduced the content of malondialdehyde (MDA). Also, it reduced the levels of inflammation factors: tumor necrosis factor-α (TNF-α), interferon-γ (IFN-γ), interleukin (IL)-1β, and IL-6. In addition, q-PCR results showed that GPFE upregulated mRNA expression levels of nuclear factor erythroid 2-related factor 2 (Nrf2), copper/zinc superoxide dismutase (SOD1), manganese superoxide dismutase (SOD2), glutathione peroxidase (GSH-Px), γ-glutamylcysteine synthetase (γ-GCS), CAT, and downregulated IL-6 and TNF-α mRNA expression levels. The mechanism of GPFE may be related to the inhibition of oxidative stress and inflammation.

Conclusion

The experiment indicates GPFE has a good protective effect on acute chemical liver injury in mice induced by CCl₄ via antioxidant and anti-inflammatory pathways.

Optimization of Extraction Conditions of Phytochemical Compounds and Anti-Gout Activity of Euphorbia hirta L. (Ara Tanah) Using Response Surface Methodology and Liquid Chromatography-Mass Spectrometry (LC-MS) Analysis

Gout is a common disease affected most of the people due to the elevation of uric acid in the blood. Flavonoid and phenolic compounds are reported to exert the anti-gout activity of medicinal plants. Hence, this study aimed at optimizing the extraction conditions of phenolic and flavonoid compounds as well as the anti-gout (xanthine oxidase inhibitory activity) in vitro of Euphorbia hirta using response surface methodology (RSM). The plant part used was the whole plant excluding roots. The effects of three independent variables (extraction time, X ₁; extraction temperature, X ₂; and solid-to-liquid ratio, X ₃) on three response variables (total flavonoid content, Y ₁; total phenolic content, Y ₂; and xanthine oxidase inhibitory activity, Y ₃) were determined using central composite design (CCD) while phytochemical profiling of the extracts was determined by liquid chromatography-mass spectrometry (LC-MS). Quadratic models produced a satisfactory fitting of the experimental data with regard to total flavonoid content (r ² = 0.9407, p < 0.0001), total phenolic content (r ² = 0.9383, p < 0.0001), and xanthine oxidase inhibitory activity (r ² = 0.9794, p < 0.0001). The best extraction conditions observed for total flavonoid content, total phenolic content, and xanthine oxidase inhibitory activity were at a temperature of 79.07°C for 17.42 min with solid-to-liquid ratio of 1 : 20 g/ml. The optimum values for total flavonoid, total phenolic, and xanthine oxidase inhibitory activity were 67.56 mg RE/g, 155.21 mg GAE/g, and 91.42%, respectively. The main phytochemical compounds in the optimized E. hirta extract are neochlorogenic acid, quercetin-3β-D-glucoside, syringic acid, caffeic acid, ellagic acid, astragalin, afzelin, and quercetin. As conclusion, this study clearly demonstrated the best conditions to obtain higher xanthine oxidase inhibitory activity and phytochemical compounds which can be further used for the development of anti-gout agents.

Optimization of ultrasound-assisted extraction of glycyrrhizic acid from licorice using response surface methodology

BACKGROUND

The present study optimized ultrasound-assisted extraction conditions to maximize extraction yields of glycyrrhizic acid from licorice.

METHODS

The optimal extraction temperature (X1), extraction time (X2), and methanol concentration (X3) were identified using response surface methodology (RSM). A central composite design (CCD) was used for experimental design and analysis of the results to obtain the optimal processing parameters.

RESULTS

Statistical analyses revealed that three variables and the quadratic of X1, X2, and X3 had significant effects on the yields and were followed by significant interaction effects between the variables of X2 and X3 (p < 0.01). A 3D response surface plot and contour plots derived from the mathematical models were applied to determine the optimal conditions. The optimum ultrasound-assisted extraction conditions were as follows: extraction temperature, 69 °C; extraction time, 34 min; and methanol concentration, 57%. Under these conditions, the experimental yield of glycyrrhizic acid was 3.414%, which agreed closely with the predicted value (3.406%).

CONCLUSION

The experimental values agreed with those predicted by RSM models, thus indicating the suitability of the model employed and the success of RSM in optimizing the extraction conditions.

Optimization of polyphenol removal from kiwifruit juice using a macroporous resin

BACKGROUND

The separation of polyphenols from kiwifruit juice is essential for enhancing sensory properties and prevent the browning reaction in juice during processing and storage.

RESULTS

The present study investigated the dynamic adsorption and desorption of polyphenols in kiwifruit juice using AB-8 resin. The model obtained could be successfully applied to predict the experimental results of dynamic adsorption capacity (DAC) and dynamic desorption quantity (DDQ). The results showed that dynamic adsorption of polyphenols could be optimised in a juice concentration of 19 °Brix, with a feed flow-rate of 1.3 mL min^-1 and a feed volume of 7 bed volume (BV). The optimum conditions for dynamic desorption of polyphenols from the AB-8 resin were an ethanol concentration of 43% (v/v), an elute flow-rate of 2.2 mL min^-1 and an elute volume of 3 BV. The optimized DAC value was 3.16 g of polyphenols kg^-1 resin, whereas that for DDQ was 917.5 g kg^-1 , with both values being consistent with the predicted values generated by the regression models. The major polyphenols in the dynamic desorption solution consisted of seven compositions.

CONCLUSION

The present study could be scaled-up using a continuous column system for industrial application, thus contributing to the improved flavor and color of kiwifruit juice. © 2016 Society of Chemical Industry.

Ultrasonic-assisted extraction of pigments from Hylocereus undatus flowers: optimization, antioxidant activity, and HPLC analysis

Optimization extraction, antioxidant activity, and HPLC analysis of pigments fromHylocereus undatusflowers.

Optimization of extraction of prodelphinidins from bayberry (Myrica rubra Sieb. et Zucc.) leaves

The antioxidant activity of bayberry leaf extract determined by DPPH• and FRAP assay was comparable with ascorbic acid. Prodelphinidins in the extract had significant positive correlation with the antioxidant activities of bayberry leaf extract. The correlation coefficients (R) were 0.963 and 0.970 for DPPH• and FRAP assay, respectively. In order to develop a new natural antioxidant, a central composite design was employed and the yield of prodelphinidins was selected as the response value to investigate the extraction. The best possible combination of acetone concentration, time, solid-liquid ratio and temperature was obtained for the maximum extraction of prodelphinidins by using response surface methodology (RSM). The extraction yield of prodelphinidins was affected significantly by process variables. The optimal conditions obtained by RSM include 56.93 % acetone, 31.98 min time, 1: 44.52 solid-liquid ratio, and 50.00 °C temperature. Under the optimum condition, the experimental yield of prodelphinidins was 117.3 ± 5.1 mg/g, which was not different from the predicted value significantly.