Adsorption of Cd(II) ions at the hydroxyapatite/electrolyte solution interface

Efficient removal of heavy metal ions by diethylenetriaminepenta (methylene phosphonic) acid-doped hydroxyapatite

Diethylenetriaminepenta (methylene phosphonic) acid (DTPMP) was first used as a dopant to modify hydroxyapatite and applied to remove Pb²⁺. The adsorption capacity of modified hydroxyapatite for Pb²⁺ can reach 2185.92 mg/g, which was 10.4 times that of commercial nanohydroxyapatite. The characterizations after adsorption of Pb²⁺ indicated the existence of chelation and the formation of the low bioavailability Pb₁₀(PO₄)₆(OH)₂. Moreover, the interaction of different components containing DTPMP, HAP, and pollutant Pb²⁺ was investigated by molecular dynamics (MD) simulation, which indicated that the organic-phosphonic group of DTPMP (PO₃H^-) had a stronger complex effect with calcium ions or lead ions than that of the inorganic-phosphate group of HAP (PO₄^3-) with the two metal ions, which affected the crystallinity of HAP, and greatly improved the removal effect of DTPMP doped HAP composites for Pb²⁺ contaminants, the existence of amino groups can further enhance the affinity between DTPMP and HAP or lead ions. The chelation mechanism of DTPMP and Pb²⁺ was probed in depth by combining basin analysis, topology analysis of atoms in molecules (AIM), electron localization function (ELF) analysis, bond order density (BOD) & natural adaptive orbital (NAdO)analysis and orbital component analysis.

Chitosan-Hydroxyapatite Bio-Based Composite in Film Form: Synthesis and Application in Wastewater

Water purification from toxic metals was the main objective of this work. A composite in film form was prepared from the biomaterials hydroxyapatite, chitosan and glycerol using the dissolution/recrystallization method. A nanoparticle-based film with a homogenous and smooth surface was produced. The results of total reflectance infrared spectroscopy (ATR-FTIR) and thermal gravimetric analysis (TGA/DTA) demonstrated the presence of a substantial physical force between composite components. The composite was tested for its ability to absorb Cd2+ and Zn2+ ions from aqueous solutions. Cd2+ and Zn2+ adsorption mechanisms are fit using the Langmuir model and the pseudo-second-order model. Thermodynamic parameters indicated that Cd2+ and Zn2+ ion adsorption onto the composite surface is spontaneous and preferred at neutral pH and temperatures somewhat higher than room temperature. The adsorption studies showed that the maximum adsorption capacity of the HAp/CTs bio-composite membrane for Cd2+ and Zn2+ ions was in the order of cadmium (120 mg/g) > Zinc (90 mg/g) at an equilibrium time of 20 min and a temperature of 25 °C. The results obtained on the physico-chemical properties of nanocomposite membranes and their sorption capacities offer promising potential for industrial and biological activities.

Effects of Electronegativity and Hydration Energy on the Selective Adsorption of Heavy Metal Ions by Synthetic NaX Zeolite

The adsorption capacity of synthetic NaX zeolite for Pb²⁺, Cd²⁺, Cu²⁺ and Zn²⁺ in single and multi-component systems were investigated. The effects of electronegativity and hydration energy on the selective adsorption, as well as potential selective adsorption mechanism of the NaX zeolite for Pb²⁺, Cd²⁺, Cu²⁺ and Zn²⁺ were also discussed. The maximum adsorption capacity order of the heavy metals in the single system was Pb²⁺ > Cd²⁺ > Cu²⁺ > Zn²⁺, and this could be related to their hydration energy and electronegativity. The values of the separation factors (α) and affinity constant (K_EL) in different binary systems indicated that Pb²⁺ was preferentially adsorbed, and Zn²⁺ presented the lowest affinity for NaX zeolite. The selective adsorption capacities of the metals were in the order, Pb²⁺ > Cd²⁺ ≈ Cu²⁺ > Zn²⁺. The trend for the selective adsorption of NaX zeolite in ternary and quaternary systems was consistent with that in the binary systems. Pb²⁺ and Cu²⁺ reduced the stability of the Si-O-Al bonds and the double six-membered rings in the NaX framework, due to the high electronegativity of Pb²⁺ and Cu²⁺ than that of Al³⁺. The selective adsorption mechanism of NaX zeolite for the high electronegative metal ions could mainly result from the negatively charged O in the Si-O-Al structure of the NaX zeolite, hence heavy metal ions with high electronegativity display a strong affinity for the electron cloud of the oxygen atoms in the Si-O-Al. This study could evaluate the application and efficiency of zeolite in separating and recovering certain metal ions from industrial wastewater.

Insights into the adsorption mechanism of tannic acid by a green synthesized nano-hydroxyapatite and its effect on aqueous Cu(II) removal

The polyphenolic tannic acid (TA) has been widely used in the stabilization and surface modification of nanomaterials. The interaction mechanism of TA with the biogenic nano-hydroxyapatite (nHAP) and its environmental importance, however, are poorly understood. This study explored the adsorption of TA using the green synthesized, eggshell-derived nHAP and implications of this process for the removal of aqueous Cu(II) via batch adsorption experiments, Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS) investigations. TA adsorption by nHAP was a complex pH-dependent process and significantly correlated with TA molecule speciation and amphoteric properties of nHAP via multiple adsorption modes including surface complexation, electrostatic attraction, and hydrogen bond. The maximum TA adsorption amount was found to be 94.8 mg/g for less crystalline nHAP with lower calcination temperature. In the ternary Cu-TA-nHAP systems, TA promoted Cu(II) adsorption at pH < 5 and reduced Cu(II) uptake at pH > 5. Further studies of the effects of ionic strength and addition sequences, as well as Raman, FTIR, and XPS analyses revealed Cu(II) adsorption on nHAP was mainly dominated by inner-sphere surface complexation. These results can shed light on not only the utility of biogenic nHAP for TA and Cu(II) adsorption but also the evaluation of the effect of TA on the environmental behavior of heavy metals.

Mesoporous Biopolymer Architecture Enhanced the Adsorption and Selectivity of Aqueous Heavy-Metal Ions

Halloysite nanotubes (HNT) and ball-milled biochar (BC) incorporated biocompatible mesoporous adsorbents (HNT-BC@Alg) were synthesized for adsorption of aqueous heavy-metal ions. HNT-BC@Alg outperformed the BC, HNT, and BC@Alg in removing cadmium (Cd), copper (Cu), nickel (Ni), and lead (Pb). Mesoporous structure (∼7.19 to 7.56 nm) of HNT-BC@Alg was developed containing an abundance of functional groups induced from encapsulated BC and tubular HNT, which allowed heavy metals to infiltrate and interact with the adsorbents. Siloxane groups from HNT, oxygen-containing functional groups from BC, and hydroxyl and carboxyl groups from alginate polymer play a significant role in the adsorption of heavy-metal ions. The removal percentage of heavy metals was recorded as Pb (∼99.97 to 99.05%) > Cu (∼95.01 to 90.53%) > Cd (∼92.5 to 55.25%) > Ni (∼80.85 to 50.6%), even in the presence of 0.01/0.001 M of CaCl₂ and Na₂SO₄ as background electrolytes and charged organic molecule under an environmentally relevant concentration (200 μg/L). The maximum adsorption capacities of Ni, Cd, Cu, and Pb were calculated as 2.85 ± 0.08, 6.96 ± 0.31, 16.87 ± 1.50, and 26.49 ± 2.04 mg/g, respectively. HNT-BC@Alg has fast sorption kinetics and maximum adsorption capacity within a short contact time (∼2 h). Energy-dispersive X-ray spectroscopy (EDS) elemental mapping exhibited that adsorbed heavy metals co-distributed with Ca, Si, and Al. The reduction of surface area, pore volume, and pore area of HNT-BC@Alg (after sorption of heavy metals) confirms that mesoporous surface (2-18 nm) supports diffusion, infiltration, and interaction. However, a lower range of mesoporous diameter of the adsorbent is more suitable for the adsorption of heavy-metal ions. The adsorption isotherm and kinetics fitted well with the Langmuir isotherm and the pseudo-second-order kinetic models, demonstrating the monolayer formation of heavy-metal ions through both the physical sorption and chemical sorption, including pore filling, ion exchange, and electrostatic interaction.

Carbon-Silica Composite as Adsorbent for Removal of Hazardous C.I. Basic Yellow 2 and C.I. Basic Blue 3 Dyes

Treatment of wastewaters containing hazardous substances such as dyes from the textile, paper, plastic and food industries is of great importance. Efficient technique for the removal of highly toxic organic dyes is adsorption. In this paper, adsorptive properties of the carbon-silica composite (C/SiO2) were evaluated for the cationic dyes C.I. Basic Blue 3 (BB3) and C.I. Basic Yellow 2 (BY2). The sorption capacities were determined as a function of temperature (924.6-1295.9 mg/g for BB3 and 716.3-733.2 mg/g for BY2 at 20-60 °C) using the batch method, and the Langmuir, Freundlich and Temkin isotherm models were applied for the equilibrium data evaluation using linear and non-linear regression. The rate of dye adsorption from the 100 mg/L solution was very fast, after 5 min. of phase contact time 98% of BB3 and 86% of BY2 was removed by C/SiO2. Presence of the anionic (SDS), cationic (CTAB) and non-ionic (Triton X-100) surfactants in the amount of 0.25 g/L caused decrease in BB3 and BY2 uptake. The electrokinetic studies, including determination of the solid surface charge density and zeta potential of the composite suspensions in single and mixed adsorbate systems, were also performed. It was shown that presence of adsorption layers changes the structure of the electrical double layer formed on the solid surface, based on the evidence of changes in ionic composition of both surface layer and the slipping plane area. The greatest differences between suspension with and without adsorbates was obtained in the mixed dye + SDS systems; the main reason for this is the formation of dye-surfactant complexes in the solution and their adsorption at the interface.

Hydroxyapatite with magnetic core: Synthesis methods, properties, adsorption and medical applications

This review presents the actual state of knowledge and recent research results on the magnetic composite synthesized from iron oxide (γ-Fe₂O₃ or Fe₃O₄) and hydroxyapatite. It can be obtained applying some methods, i.e. chemical precipitation, hydrothermal, sol-gel, and biomimetic or combined techniques which exhibit characteristic properties affecting the form of the prepared product. More specific details are discussed in this paper. A comparison of the discussed synthesis methods is presented. On the basis of selected publications, a comparison of the results of the analysis by XRD, FTIR, SEM and EDX methods for hydroxyapatite with a magnetic core was also presented. Moreover, the characteristics large adsorption capacity and specific area allow employing nanocomposites as adsorbents particularly in removal of toxic metal ions. Nowadays this issue is extremely vital due to large amounts of pollutants in the environment and greater ecological awareness of people. Moreover, magnetic hydroxyapatite can be also applied as a catalyst in various syntheses or oxidation reactions as well as in medicine in magnetic resonance imaging, hyperthermia treatment, drug delivery and release, bone regeneration or cell therapy.

Insights into dynamic adsorption of lead by nano-hydroxyapatite prepared with two-stage ultrasound

Nano-hydroxyapatite (nHAP) has an excellent effect on the remediation of Pb contaminated water and soil. In this study, an efficient modified nHAP was prepared assisted with two-stage ultrasonic irradiation. The effects of ultrasound modification on the nHAP were tested using X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Fourier Transform InfraRed spectroscopy (FTIR), Brunauer-Emmett-Teller (BET) and combined batch Pb uptake experiments. The nHAP with ultrasound has a fine structure with the width and length of around 9 nm and 40 nm respectively. The ultrasound parameter of 1s/36s in stage 1 and 16s/18s in stage 2 was verified as the optimum under which the nHAP prepared performed the best with the maximum adsorption capacity of 1300.93 mg/g. The results of XRD and SEM indicated that the sorbent after uptake of Pb²⁺ was mainly Pb₁₀(PO₄)₆OH₂ (HPY) with insignificant Ca₁₀Pb_10-x(PO₄)₆OH₂. Compared the results of Pb/Ca, pH and XRD with the metal fraction of Pb in adsorbents during the dynamic sorption process, this research proved that the effects of complexation, cation exchange and dissolution and precipitation coexisted in the initial stage, while the dissolution and precipitation gradually dominated the adsorption mechanism with contact time. The processes of Pb²⁺ uptake by nHAP sorbents prepared under different ultrasound parameter presented almost the same dynamic mechanism with a little difference in time node. The research of dynamic mechanism of Pb²⁺ uptake by a superior nHAP is essential for both contaminated water and soil remediation.

Adsorption of Uranyl Ions at the Nano-hydroxyapatite and Its Modification

Nano-hydroxyapatite and its modification, hydroxyapatite with the excess of phosphorus (P-HAP) and hydroxyapatite with the carbon ions built into the structure (C-HAP), were prepared by the wet method. They were studied by means of XRD, accelerated surface area and porosimetry (ASAP), and SEM. The size of crystallites computed using the Scherrer method was nano-hydroxyapatite (HAP) = 20 nm; P-HAP-impossible to determine; C-HAP = 22 nm; nano-HAP/U(VI) = 13.7 nm; P-HAP/U(VI)-impossible to determine, C-HAP/U(VI) = 11 nm. There were determined basic parameters characterizing the double electrical layer at the nano-HAP/electrolyte and P-HAP/electrolyte, C-HAP/electrolyte inter faces: density of the surface charge and zeta potential. The adsorption properties of nano-HAP sorbent in relation to U(VI) ions were studied by the batch technique. The adsorption processes were rapid in the first 60 min and reached the equilibrium within approximately 120 min (for P-HAP) and 300 min (for C-HAP and nano-HAP). The adsorption process fitted well with the pseudo-second-order kinetics. The Freundlich, Langmuir-Freundlich, and Dubinin-Radushkevich models of isotherms were examined for their ability to the equilibrium sorption data. The maximum adsorption capabilities (q _m ) were 7.75 g/g for P-HAP, 1.77 g/g for C-HAP, and 0.8 g/g for HAP at 293 K.

Synthesis, Structural, and Adsorption Properties and Thermal Stability of Nanohydroxyapatite/Polysaccharide Composites

A series of composites based on nanohydroxyapatite (nHAp) and natural polysaccharides (PS) (nHAp/agar, nHAp/chitosan, nHAp/pectin FB300, nHAp/pectin APA103, nHAp/sodium alginate) was synthesized by liquid-phase two-step method and characterized using nitrogen adsorption-desorption, DSC, TG, FTIR spectroscopy, and SEM. The analysis of nitrogen adsorption-desorption data shows that composites with a nHAp: PS ratio of 4:1 exhibit a sufficiently high specific surface area from 49 to 82 m²/g. The incremental pore size distributions indicate mainly mesoporosity. The composites with the component ratio 1:1 preferably form a film-like structure, and the value of S _BET varies from 0.3 to 43 m²/g depending on the nature of a polysaccharide. Adsorption of Sr(II) on the composites from the aqueous solutions has been studied. The thermal properties of polysaccharides alone and in nHAp/PS show the influence of nHAp, since there is a shift of characteristic DSC and DTG peaks. FTIR spectroscopy data confirm the presence of functional groups typical for nHAp as well as polysaccharides in composites. Structure and morphological characteristics of the composites are strongly dependent on the ratio of components, since nHAp/PS at 4:1 have relatively large S _BET values and a good ability to adsorb metal ions. The comparison of the adsorption capacity with respect to Sr(II) of nHAp, polysaccharides, and composites shows that it of the latter is higher than that of nHAp (per 1 m² of surface).