Surface modification of black tea waste using bleaching technique for enhanced biosorption of Methylene blue in aqueous environment

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Sustainable Chromium Recovery From Wastewater Using Mango and Jackfruit Seed Kernel Bio-Adsorbents

Wastewater is a rich source of valuable chemicals of industrial importance. However, their economic recovery is crucial for sustainability. The objective of the present work is to recover hexavalent chromium (Cr VI) as a value-added transition metal from wastewater cost-effectively; the biosorbent derived from seed kernels of mango (M) and jackfruit (JF) were applied for removing the metal from simulated wastewater. The functional groups of the biomass were analysed with the help of Fourier transform infrared (FTIR) spectroscopy, micrographs were generated using a scanning electron microscope, and crystallinity was determined by an x-ray diffractometer (XRD). The concentration of Cr VI in wastewater was analysed by an inductively coupled plasma optical emission spectrometer (ICP-OES). Process parameters (pH, dose, contact time, temperature, and initial concentration) were optimized for efficient Cr VI adsorption using a response surface methodology-based Box-Behnken design (BBD) employing Design-software 6.0.8. The batch experiment at room temperature at pH 4.8 and Cr VI removal ∼94% (M) and ∼92% (JF) was achieved by using a 60-mg dose and an initial Cr (VI) concentration of 2 ppm in 120 min. The equilibrium Cr binding on the biosorbent was well explained using Freundlich isotherm (R ² = 0.97), which indicated the indirect interactions between Cr (VI) and the biosorbent. Biosorption of Cr (VI) followed the pseudo-order and intra-particle diffusion models. The maximum adsorption capacity of the M and JF bio-adsorbent is 517.24 and 207.6 g/mg, respectively. These efficient, cost-effective, and eco-friendly biosorbents could be potentially applied for removing toxic Cr (VI) from polluted water.

Biosorption potential of Phoenix dactylifera coir wastes for toxic hexavalent chromium sequestration

Valorization of waste phytomass into valuable components provide new functionality to these biowastes and annul problems associated with their safe disposal. In this study, date palm (Phoenix dactylifera) coir (DPC) waste was tested for its toxic hexavalent chromium (Cr(VI)) ions biosorption. The DPC biosorbent was subjected to SEM, EDX, FTIR, TGA and N₂ adsorption/desorption characterization studies. Results showed that the cellulose-rich DPC surface contained mesopores with a wide number of functional groups and possessed suitable surface attributes for Cr(VI) ions sequestration. Batch biosorption tests established the Cr(VI) ions sequestration potential of the DPC biosorbent with a maximum chromium removal efficiency of 87.2% for a 100 ppm initial feed concentration at pH 2, dosage 0.3 g, temperature 30 °C, contact time 60 min and agitation speed 100 rpm. Langmuir isotherm fitted well (R² = 0.9955) with the experimental data while the kinetic analysis showed that Cr(VI) ions sequestration by DPC followed the pseudo-second order model. Biosorption thermodynamics revealed the exothermic nature and low-temperature preference for the effective binding of chromium ions on DPC. Regeneration of the biosorbent using NaOH wash showed a nearly steady Cr(VI) ions removal efficiency (with a loss <10%) by the DPC till four recycle runs. Economic analysis showed a very low production cost of $1.09/kg for the DPC biosorbent with a total cost of $4.36/m³ for a scale-up batch process wastewater treatment plant. Thus, a low-cost, effectual and sustainable biosorbent for effective treatment of Cr(VI) ions polluted water streams has been reported.

Adsorption of methylene blue onto porous carbon materials prepared from Na2EDTA

A simple self-activation preparation procedure and excellent adsorption performance for methylene blue.