Adsorptive removal of methylene blue from aqueous solution on activated carbon prepared from Malawian baobab fruit shell wastes: Equilibrium, kinetics and thermodynamic studies

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Synthesis and Characterization of Activated Carbon from Agrowastes for the Removal of Acetic Acid from an Aqueous Solution

In this study, activated carbons prepared from agrowastes by chemical activation were used to remove acetic acid from an aqueous solution through a batch process. The prepared adsorbents were characterized by SEM, XRD, FT-IR, and point of zero charge (pHpzc). The effects of adsorbent dosage, initial concentration, and contact time were considered. Equilibrium data was tested using Langmuir, Freundlich, Temkin, and Frenkel–Halsey–Hill models. The degree of adsorption of acetic acid increased for both adsorbents as contact time, and adsorbent dosage and initial concentration were increased. The adsorption data were described well by the (Freundlich=Frenkel–Halsey–Hill) models with the highest regression coefficient of $R^2=0.9961$ and $R^2=0.9951$ for Rice Husk Activated Carbon (RH-AC) and Potato Peels Activated Carbon (PP-AC), respectively. This suggests a multilayer through the existence of a heterogeneous pore distribution in the adsorbent surface. Kinetic data agreed well with pseudosecond-order ( $R^2=0.999$ and $R^2=0.994$ ) RH-AC and PP-AC, correspondingly. This indicates that the adsorption process was chemisorption in nature. The regeneration studies showed that the adsorbents prepared could be renewed and reused before losing their adsorbing affinity for acetic acid.

Synthesis and Characterization of Activated Carbons Prepared from Agro-Wastes by Chemical Activation

In this present study, activated carbons were prepared from rice husks and potato peels by chemical activation with 40% phosphoric acid (H3PO4). The effects of carbonization temperature and impregnation ratio were investigated with a continuous activation period. Physicochemical characteristics such as surface morphology, surface charge, and surface functional groups were assessed. According to X-ray diffraction measurements, the results showed that the activated carbons had identical pHpzc (6.8) and that the activated carbons generated were carbonaceous. The existence of hydroxyl, carbonyl, amines, aromatic, and other functional groups, which are excellent for adsorption, was revealed by surface chemistry studies. Micrographs taken with a scanning electron microscope indicated wide opening pores with a larger mesoporous surface area and many linked pores. Rice husk activated carbon outperformed potato peel activated carbon in laboratory tests. The research has shown that the agro-wastes employed in the study are possible precursors for making locally activated carbons at a low cost, thus resolving the problem of agro-waste disposal.