Dental Enamel Quality and Black Tooth Stain: A New Approach and Explanation by using Raman and AFM Techniques

A Preliminary Stability Assessment of Three State-of-the-Art CAD/CAM Materials Under Human Gingival Cell Culture

CAM/CAD composites are widely used as dental restoration materials due to their resistivity to wear. The purpose of this study was to determine the effect of human gingival fibroblast cells on three different computer-aided design/computer-aided manufacturing (CAD/CAM) hybrid materials with resin-based composites (RBC) and to assess their stability following cell growth. The CAM/CAD dental materials were investigated in different conditions as follows: (i) cells (human gingival fibroblasts, HFIB-Gs) incubated over the material for each sample, denoted as A; (ii) reference, the raw material, denoted as B; and (iii) materials incubated in DMEM medium, denoted as C. We employed Vicker's hardness test, EDS, SEM, and AFM measurements as well as Raman spectroscopy to carefully characterize the surface modifications and the structural integrity of the CAM/CAD materials before and after fibroblast cell culture. The analysis of the surface in terms of morphology, roughness, structure, and plastic deformation presented no significant difference after incubation in cells or in media, proving their extraordinary stability and resilience to biofilm formation.

Performance Assessment of Three Similar Dental Restorative Composite Materials via Raman Spectroscopy Supported by Complementary Methods Such as Hardness and Density Measurements

(1) Background: A widespread problem in oral health is cavities produced by cariogenic bacteria that consume fermentable carbohydrates and lower pH to 5.5-6.5, thus extracting Ca2+ and phosphate ions (PO43-) from teeth. Dental restorative materials based on polymers are used to fill the gaps in damaged teeth, but their properties are different from those of dental enamel. Therefore, a question is raised about the similarity between dental composites and natural teeth in terms of density and hardness. (2) Methods: We have used Raman spectroscopy and density and microhardness measurements to compare physical characteristics of several restorative dental composites at different polymerization intervals. (3) Results: XRVHerculite®, Optishade®, and VertiseFlow® showed the very different characteristics of the physical properties following four polymerization intervals. Of the three composites, OptiShade showed the highest polymerization rate. (4) Conclusions: Only fully polymerized composites can be used in teeth restoring, because incomplete polymerization would result in cracks, pitting, and lead finally to failure.

Periodontal Disease Monitoring by Raman Spectroscopy of Phosphates: New Insights into Pyrophosphate Activity

(1) Background: The intent of this survey was to investigate the quality of the alveolar bone by revealing the different phases for calcified tissues independent of the medical history of the patient in relation to periodontal disease by means of Raman spectroscopy and then to correlate the results by suggesting a possible mechanism for the medical impairment; (2) Methods: The investigation was mainly based on Raman spectroscopy that was performed in vivo during surgery for the selected group of patients. The targeted peaks for the Raman spectra were according to the reference compounds (e.g., calcium phosphates, other phosphates); (3) Results: The variation in the intensity of the spectrum correlated to the specific bone constituents' concentrations highlights the bone quality, while some compounds (such as pyrophosphate, PPi) are strongly related to the patient's medical status, and they provide information regarding a physiological process that occurred in the calcified tissues. Moreover, bone sample fluorescence is related to the collagen (Col) content, enabling a complete evaluation of bone quality, revealing the importance of collagen matrix acting as a load-bearing element for Calcium phosphate (CaP) deposition during the complex bone mineralization process; (4) Conclusions: We highlight that Raman spectroscopy can be considered a viable investigative method for in vivo and rapid bone quality valuation through oral health monitoring.

Preliminary Assessment of In Vivo Raman Spectroscopy Technique for Bone Quality Evaluation of Augmented Maxillary Sinus Floor

(1) Background: In oral surgery, bone regeneration is achieved through various types of bone grafts or bone substitutes and its success is usually analyzed by micro-computed tomography and histomorphometry. The aim of this study was to evaluate the usefulness of Raman spectroscopy as an alternative to other techniques for bone quality evaluation during a standard oral surgery procedure. (2) Methods: The preliminary evaluation of bone augmentation during maxillary sinus floor elevation oral surgery was performed by Raman spectroscopy for several (five) patients during and after the surgery and the results were compared with postoperative data from histomorphometry, EDX and SEM analysis. (3) Results: After analyzing all the results for the bone samples according to the four methods (Raman, EDX, SEM and Histology) that were used in our study, the obtained result of the investigation provided a good augmentation process for three of the patients and partly successful augmentation process for two of the patients. The primary evaluation using Raman spectroscopy (in vivo and ex vivo investigation) was confirmed by histological results, thus having a first step for validation of Raman as a new method of imaging for dentistry. (4) Conclusions: Our results show that Raman spectroscopy could provide fast and reliable insight on bone condition during augmentation of the maxillary sinus floor. We emphasize the advantages and drawbacks of the proposed techniques as its accuracy could increase by performing larger size clinical trials. Using the Raman mapping, the method can serve as an alternative to histology.

Raman Spectroscopy as Spectral Tool for Assessing the Degree of Conversion after Curing of Two Resin-Based Materials Used in Restorative Dentistry

(1) Background: The treatment of dental cavities and restoration of tooth shape requires specialized materials with specific clinical properties, including being easy to model, light-cured, having a natural color, reduced shrinkage, a hardness similar to hydroxyapatite, and no leakage. The dimensional stability of resin composite materials is affected by polymerization shrinkage, degree of conversion (number of π carbon bonds converted into σ ones), thermal contraction and expansion, and interactions with an aqueous environment. (2) Methods: The materials used in our investigation were two composite resins with similar polymer matrices, but different filler (micro/nano filler). To evaluate the properties of samples, we employed the pycnometer technique (pycnometer from Paul Marienfeld Gmbh, Lauda-Königshofen, Germany), RAMAN spectroscopy technique (MiniRam Equipment from B&W Tek Inc., Plainsboro Township, NJ, USA; 785 nm laser source), SEM and EDX (FEI Inspect S.). (3) Results: The size of the filler plays an important role in the polymerization: for the pycnometric results, the larger particle filler (Sample 1) seems to undergo a rapid polymerization during the 45 s curing, while the nanoparticle filer (Sample 2) needs additional curing time to fully polymerize. This is related to a much larger porosity, as proved by SEM images. The lower degree of conversion, as obtained by Raman spectroscopy, in the same geometry means that the same volume is probed for both samples, but Sample 1 is more porous, which means less amount of polymer is probed for Sample 1. (4) Conclusions: For the two composites, we obtained a degree of conversion of 59% for Sample 1 and 93% for Sample 2, after 45 s of curing.

Raman Spectroscopy: In Vivo Application for Bone Evaluation in Oral Reconstructive (Regenerative) Surgery

The aim of this study was to evaluate the quality of the bone, revealing the different phases for calcified tissues independent of the medical history of the patient in relation to periodontitis by means of in vivo Raman spectroscopy. Raman spectroscopy measurements were performed in vivo during surgery and then ex vivo for the harvested bone samples for the whole group of patients (ten patients). The specific peaks for the Raman spectrum were traced for reference compounds (e.g., calcium phosphates) and bone samples. The variation in the intensity of the spectrum in relation to the specific bone constituents’ concentrations reflects the bone quality and can be strongly related with patient medical status (before dental surgery and after a healing period). Moreover, bone sample fluorescence is related to collagen content, enabling a complete evaluation of bone quality including a “quasi-quantification” of the healing process similar to the bone augmentation procedure. A complete evaluation of the processed spectra offers quantitative/qualitative information on the condition of the bone tissue. We conclude that Raman spectroscopy can be considered a viable investigation method for an in vivo and quick bone quality assessment during oral and periodontal surgery.

Evaluation of the quality of local butters: A new approach based on Raman spectroscopy and supported by the classical pycnometer method

In this study, the quality of the local Romanian butters was investigated using the classical pycnometer and optic microscopy methods, combined with Raman spectroscopy. We used a pool of 10 samples with different characteristics, and analyzed them by the three aforementioned methods. Pycnometric measurements showed a direct correlation between the fat content and the density values of the samples. Raman spectroscopy validated the results from the pycnometric measurements and the optical microscopy and indicated several other properties, such as protein content, hydration, saturation level of the polycarbonate chains, as well as the total cis isomer content and the type of arrangement preferred by the aliphatic chains (polymorphic transition). The methods employed in the present study have a strong potential to become analytical tools for the food industry and food safety agencies in order to assess the quality of butters and margarines, in a fast and cost-effective manner.