Removal of nitrophenols from water using cellulose derived nitrogen doped graphitic carbon material containing titanium dioxide

Sustainable materials in the removal of pesticides from contaminated water: Perspective on macro to nanoscale cellulose

Recently, over utilization of pesticides in agrarian and non- agrarian sectors has resulted in a significant increment in the deposition of their remnants in different segments of the environmental media. The presence of pesticides and transportation of their different metabolites in rivers, ponds, lakes, soils, air, groundwater sources and drinkable water sources has demonstrated a high threat to human wellbeing and the climate. Thus, the removal of pesticides and their metabolites from contaminated water is imperative to lessen the ill effects of pesticides on human beings. In the present article, we have appraised recent advances in pesticides removal utilizing low cost pristine and functionalized cellulose biomass-based derivatives. One of the key focus has been on better understand the destiny of pesticides in the environment as well as their behaviour in the water. In addition, the impact of magnetite cellulose nanocomposites, cellulose derived photo nano-catalyst, cellulose/clay nano composites, CdS/cellulose nanocomposites and activated carbons/biochar on percent removal of pesticides have also been a part of the current review. The impact of different parameters such as adsorbent dosage, pH, time of contact and initials pesticide concentration on adsorption capacity and adsorption kinetics followed during absorption by different cellulosic bio-adsorbents has also been given. The cellulosic biomass is highly efficient in the removal of pesticides and their efficiency further increases upon functionalization or their conversion into activated carbons forms. Nano particles loaded cellulosic materials have in general found to be less efficient than raw, functionalized cellulosic materials and activated carbons. Further, among different nano particles loaded with cellulose-based materials, cellulose/MnO₂ photonanocatalyst were noticed to be more effective. So considerable efforts should be given to determine the finest practices that relate to the dissipation of different pesticides from the water.

Synthesis of CaFe2O4-NGO Nanocomposite for Effective Removal of Heavy Metal Ion and Photocatalytic Degradation of Organic Pollutants

This paper reports the successful synthesis of magnetic nanocomposite of calcium ferrite with nitrogen doped graphene oxide (CaFe2O4-NGO) for the effective removal of Pb(II) ions and photocatalytic degradation of congo red and p-nitrophenol. X-ray diffraction (XRD), Fourier transform infrared (FT-IR), transmission electron microscopy (TEM), and scanning electron microscopy-energy dispersive X-ray (SEM-EDX) techniques confirmed the presence of NGO and CaFe2O4 in the nanocomposite. The Mössbauer studies depicted the presence of paramagnetic doublet and sextet due to presence of CaFe2O4 NPs in the nanocomposite. The higher BET surface area in case of CaFe2O4-NGO (52.86 m2/g) as compared to CaFe2O4 NPs (23.45 m2/g) was ascribed to the effective modulation of surface in the presence of NGO. Adsorption followed the Langmuir model with maximum adsorption capacity of 780.5 mg/g for Pb(II) ions. Photoluminescence spectrum of nanocomposite displayed four-fold decrease in the intensity, as compared to ferrite NPs, thus confirming its high light capturing potential and enhanced photocatalytic activity. The presence of NGO in nanocomposite offered an excellent visible light driven photocatalytic performance. The quenching experiments supported ●OH and O2●- radicals as the main reactive species involved in carrying out the catalytic system. The presence of Pb(II) had synergistic effect on photocatalytic degradation of pollutants. This study highlights the synthesis of CaFe2O4-NGO nanocomposite as an efficient adsorbent and photocatalyst for remediating pollutants.

Phosphate removal from wastewater using novel renewable resource-based, cerium/manganese oxide-based nanocomposites

Nanocomposites containing mixed metal oxides show excellent phosphate removal results and are better compared to individual metal oxides. In this research, cerium/manganese oxide nanocomposites, embedded on the surface of modified cellulose pine wood shaving, were synthesized by a simple technique that is both eco-friendly and economically feasible. No toxic or petroleum chemicals were employed during preparation. Scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), surface area analysis, and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy were performed to study the shape and size of nanocomposites as well as composition of elements present on the surface of the nanocomposites. Adsorption isotherm (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) and kinetic studies (pseudo first and second-order, Elovich and Weber-Morris) were carried out to determine the adsorption mechanism for phosphate removal from contaminated water. The maximum adsorption capacity of nanocomposites was found to be 204.09 mg/g, 174.42 mg/g, and 249.33 mg/g for 100 mg, 300 mg, and 500 mg, respectively. The results indicate that the nanocomposites were able to decrease the phosphorus concentration from 10 to 0.01 ppm, below the threshold limit required by EPA guidelines in the USA. We also demonstrated that the media could be regenerated and reused five times without loss of performance.

Nanocrystalline Cellulose-Derived Doped Carbonaceous Material for Rapid Mineralization of Nitrophenols under Visible Light

Nitrophenols (NPs) and related derivatives are industrially important chemicals, used notably to synthesize pharmaceuticals, insecticides, herbicides, and pesticides. However, NPs and their metabolites are highly toxic and mutagenic. They pose a serious threat to human health and ecosystem. Current work was undertaken to develop a suitable visible-light active catalyst for the sustainable and efficient mineralization of NPs in an aqueous environment. Nanocrystalline cellulose (NCs)-based nitrogen-doped titanium dioxide and carbonaceous material (N-TiO₂/C) was synthesized by pyrolysis and sol-gel methods using NCs, polydopamine, and TiO₂. The synthesized N-TiO₂/C was characterized using different analytical techniques. Photocatalytic degradation of NPs under visible light indicated that acidic pH (3) was most suitable for the optimal degradation. 4-NP degradation followed both pseudo-first-order (R ² = 0.9985) and Langmuir-Hinshelwood adsorption kinetic models (adsorption constant, K _LH = 1.13 L mg^-1). Gas chromatography-mass spectrometry and ion chromatography analysis confirmed the total mineralization of 4-NP into smaller molecular fragments such as acids, alcohols, and nitrates. The total organic carbon showed that 67% of total carbon present in 4-NP was mineralized into CO₂ and CO. The catalyst was recycled for five consecutive cycles without losing its catalytic activities. The degradation mechanism of NPs with N-TiO₂/C was also explored.