Photocatalytic degradation of agricultural antibiotics using a UV-LED light source

Disinfection and Photocatalytic Degradation of Organic Contaminants Using Visible Light-Activated GCN/Ag2CrO4 Nanocomposites

Visible-light-driven photocatalysts have gained increasing attention in the past few decades in treating emerging contaminants in water and wastewater. In this work, the photocatalytic activity of the coupled graphitic carbon nitride (GCN) and silver chromate (Ag2CrO4), herein denoted as GCN/Ag2CrO4, nanocomposites was evaluated for degrading organic pollutants and inactivating microorganisms under visible light irradiation using a royal blue light-emitting diode (LED). The organic pollutants studied were 2,4-dichlorophenoxyacetic acid (2,4-D) and methyl chlorophenoxy propionic acid (MCPP or Mecoprop-P) present in KillexR, a commercially available herbicide, bovine serum albumin (BSA) protein, and SARS-CoV-2 spike protein. The disinfection experiments were conducted on wastewater secondary effluent. The results showed that over 85% degradation was achieved for both 2,4-D and Mecoprop-P in 120 min while 100% of BSA protein and 77.5% of SARS-CoV-2 protein were degraded in 20 min and 30 min, respectively. Additionally, GCN/Ag2CrO4 nanocomposites led to over one log reduction of cellular ATP (cATP), total coliforms, and E. coli in wastewater treatment plant (WWTP) secondary effluent after 60 min of royal blue LED irradiation. It was observed that the degradation performance of a photocatalyst under light irradiation is contaminant-specific. The binding affinity of the released metal ions from GCN/Ag2CrO4 with protein and ATP functional groups was responsible for the degradation of proteins and the reduction of cATP, while the generated ROS was responsible for the disinfection of total coliforms and E. coli. Overall, the results indicate that GCN/Ag2CrO4 nanocomposite is a promising photocatalyst in degrading organic pollutants and disinfecting microorganisms under visible light irradiation within a reasonable time.

An investigation of scale effect and applicability of compact light sources in microchannel reactors applied to pollutant abatement

In this work, the performance of microreactors irradiated with conventional (fluorescent) and UV-LED light was evaluated. For this purpose, a microfluidic reactor with an equivalent diameter of 133.5 μm was used. In addition, the effect of scale variation on the performance of photochemical reactors was assessed using reactors with three internal diameters (600, 1200, and 2300 μm), 2 residence times (30 and 60 s), and two sources of UVA radiation (A with irradiance of 115 W m-2 and B with irradiance of 44 W m-2). Also, the relationship between the configuration of the photocatalyst film and the effect of the scale on the performance of photochemical reactors was experimentally and theoretically investigated. For both cases, methylene blue dye was used as a model pollutant and titanium dioxide (TiO2) as a photocatalyst deposited on the inner wall of the photocatalytic reactors. For the residence time of 30 s, the smaller the reactor diameter, the greater was the degradation (22, 18, and 6%, respectively, for lamp A and 17, 16, and 8 %, respectively, for lamp B). The influence of the diameter of the reactor was also observed for the residence time of 60 s, but only for the reactor with a 2300-μm internal diameter. The reactors with diameters 600 and 1200 μm only showed different results when illuminated with lamp B (33 and 28% of methylene blue conversion, respectively). Moreover, computational simulation results suggested higher efficiency as the reactor's diameter is decreased and an optimum thickness of photocatalyst film to maximize the performance of devices in which photocatalytic reactions are carried out.

Highly efficient chloramphenicol degradation by UV and UV/H2 O2 processes based on LED light source

In this study, UV-LED was employed as a novel light source to investigate the degradation of a representative antibiotic compound, chloramphenicol (CAP), in the absence or presence of H₂ O₂ . The UV-LED irradiation showed a higher capability for degradation of CAP than conventional UV-Hg vapor lamps. Effects of the initial CAP concentration, UV wavelength, and light intensity on the degradation of CAP by UV-LED were evaluated. Introduction of H₂ O₂ evidently enhanced the degradation efficiency of CAP due to the production of reactive hydroxyl radicals. Results showed that the UV-LED/H₂ O₂ removed CAP by up to 95% within 60 min at pH 5.0, which was twice as that achieved by the UV-LED alone. The degradation products were identified to propose plausible degradation pathways. Moreover, the formation potentials of typical carbonaceous disinfection by-products (C-DBPs) and nitrogenous disinfection by-products (N-DBPs) were assessed for the CAP polluted water treated by the UV-LED alone and UV-LED/H₂ O₂ processes. Results indicate unintended formation of certain DBPs, thereby highlighting the importance of health risk assessments before practical application. This study opens a new avenue for developing environment-friendly and high-performance UV-LED photocatalytic reactors for abatement of CAP pollution in water. PRACTITIONER POINTS: UV-LED bore higher capability to degrade CAP than low-pressure Hg lamp. The optimal performance to degrade CAP can be achieved at the UV wavelength of 280 nm. The degradation efficiency under UV-LED/H₂ O₂ process was double of that under UV-LED process. TCM, DCAN, and TCNM formation were higher under the existence of UV-LED radiation. The addition of H₂ O₂ had greater influence on the formation of DCAcAm than the introduction of UV-LED.

Effect of UV dose on degradation of venlafaxine using UV/H2O2: perspective of augmenting UV units in wastewater treatment

Many water and wastewater treatment plants (WWTPs) are fitted with a UV system that provides post treatment disinfection before the water is released to receiving water. This paper presents a study on expected removal for the pharmaceutical venlafaxine (VEN) in a typical UV unit at a municipal WWTP with analysis of removal rates of an advanced oxidation process using UV irradiation with injection of H₂O₂. The study is supported by bench scale degradation experiments on VEN. Results demonstrated that UV can completely degrade VEN, but the addition of H₂O₂ increased pseudo first order rate constant by up to 2.5 times. Extrapolations of the lab data indicated that removal rates of VEN at the UV disinfection unit of a typical municipal WWTP are approximately 0.4% at standard operating conditions. With the addition of 10 mg/L of H₂O₂, degradation of VEN can be increased by ten times over existing UV treatment. By studying the impact of adjusting parameters such as UV intensity, UV dosage, and H₂O₂ dosage, a framework is set to allow researchers and engineers to move forward with developing UV/H₂O₂ systems that meet their future design needs for pharmaceutical removal.

Recent Developments in the Photocatalytic Treatment of Cyanide Wastewater: An Approach to Remediation and Recovery of Metals

For gold extraction, the most used extraction technique is the Merrill-Crow process, which uses lixiviants as sodium or potassium cyanide for gold leaching at alkaline conditions. The cyanide ion has an affinity not only for gold and silver, but for other metals in the ores, such as Al, Fe, Cu, Ni, Zn, and other toxic metals like Hg, As, Cr, Co, Pb, Sn, and Mn. After the extraction stage, the resulting wastewater is concentrated at alkaline conditions with concentrations up to 1000 ppm of metals. Photocatalysis is an advanced oxidation process (AOP) able to generate a photoreaction in the solid surface of a semiconductor activated by light. Although it is well known that photocatalytic processes can remove metals in solution, there are no compilations about the researches on photocatalytic removal of metals in wastewater with cyanide. Hence, this review comprises the existing applications of photocatalytic processes to remove metal and in some cases recover cyanide from recalcitrant wastewater from gold extraction. The use of this process, in general, requires the addition of several scavengers in order to force the mechanism to a pathway where the electrons can be transferred to the metal-cyanide matrices, or elsewhere the entire metallic cyanocomplex can be degraded by an oxidative pathway.

Photocatalytic Degradation of Azithromycin by Nanostructured TiO₂ Film: Kinetics, Degradation Products, and Toxicity

In this paper, nanostructured TiO₂ film was prepared by the by sol-gel process and dip-coating technique with titanium tetraisopropoxide as a precursor. After heat treatment at 550 °C, the deposited film was characterized by means of micro-Raman spectroscopy and atomic force microscopy (AFM). It was found that the TiO₂ film consisted of only the TiO₂ anatase phase and showed a granular microstructure. Photocatalytic degradation of azithromycin by using sol-gel nanostructured TiO₂ film was studied to define the most effective degradation process for potential use in wastewater treatment. Different factors were evaluated during photocatalysis, such as pH (3, 7, and 10), water matrix (ultrapure water and synthetic municipal waste water effluent), influence of another pharmaceutically active compound (sulfamethoxazole, one of the most often detected pharmaceutic compounds in waste waters), and radiation sources (low pressure ultraviolet (UV) mercury lamps with a UV-A and UV-C range; a light-emitting diode (LED) lamp with a radiation peak at 365 nm). The most effective degradation process was achieved with the UV-C irradiation source in matrices at pH 10. The water matrix had little effect on the photocatalytic degradation rates of azithromycin. The presence of sulfamethoxazole in the water matrix decreased the degradation rate of azithromycin, however, only in matrices with a pH level adjusted to 10. During the experiments, five azithromycin degradation products were identified and none of them showed toxic properties, suggesting effective removal of azithromycin. LED 365 nm as the irradiation source was not as effective as the UV-C lamp. Nevertheless, considering the cost, energy efficiency, and environmental aspects of the irradiation source, the LED lamp could be a “real-life” alternative.

CFD modeling of a UV-A LED baffled flat-plate photoreactor for environment applications: a mining wastewater case

The use of ultraviolet light in photoreactors for wastewater treatment has become popular as an alternative of known chemical oxidative substances. UV LED light represents cheaper, robust, and versatile alternative to traditional UV lamps. In this study, it was designed and evaluated a photoreactor with an approach of chemical fluid dynamics (CFD) and experimental validation. The evaluation consisted of (1) CFD velocity profile analysis, (2) characterization of the average light distribution with potassium ferrioxalate actinometry, (3) degradation of a typical recalcitrant metallic cyanocomplex Fe(CN)₆^3-, and (4) scavenger effect analysis in the photodegradation using potassium persulfate. Actinometrical essay concluded that the system was able to receive 1.93 μE/s. The reactor operated under turbulent regime and best result for Fe(CN)₆^3- degradation was obtained at 4 h of operation, using 5-W UV-A LEDs, with pH ~ 7 and 10 mM de S₂O₈^2-. Baffled photoreactor demonstrated to be useful for this type of illumination and wastewater treatment.

Ag loaded WO3 nanoplates for efficient photocatalytic degradation of sulfanilamide and their bactericidal effect under visible light irradiation

Sulfonamides (SAs) are extensively used antibiotics and their residues in the water bodies propose potential threat to the public. In this study, degradation efficiency of sulfanilamide (SAM), which is the precursor of SAs, using WO3 nanoplates and their Ag heterogeneous as photocatalysts was investigated. WO3 nanoplates with uniform size were synthesized by a facile one step hydrothermal method. Different amount of Ag nanoparticles (Ag NPs) were loaded onto WO3 nanoplates using a photo-reduction method to generate WO3/Ag composites. The physio-chemical properties of synthesized nanomaterials were systematically characterized. Photodegradation of SAM by WO3 and WO3/Ag composites was conducted under visible light irradiation. The results show that WO3/Ag composites performed much better than pure WO3 where the highest removal rate was 96.2% in 5h. Ag as excellent antibacterial agent also endows certain antibacterial efficiency to WO3, and 100% removal efficiency against Escherichia Coli and Bacillus subtilis could be achieved in 2h under visible light irradiation for all three WO3/Ag composites synthesized. The improved performance in terms of SAM degradation and antibacterial activity of WO3/Ag can be attributed to the improved electron-hole pair separation rate where Ag NPs act as effective electron trapper during the photocatalytic process.

Competitive removal of pharmaceuticals from environmental waters by adsorption and photocatalytic degradation

This work explores the competitive removal of pharmaceuticals from synthetic and environmental waters by combined adsorption-photolysis treatment. Five drugs usually present in waterways have been used as target compounds, some are pseudo-persistent pollutants (carbamazepine, clofibric acid, and sulfamethoxazole) and others are largely consumed (diclofenac and ibuprofen). The effect of the light source on adsorption of drugs onto activated carbons followed by photolysis with TiO2 was assessed, being UV-C light the most effective for drug removal in both deionized water and river water. Different composites prepared from titania nanoparticles and powdered activated carbons were tested in several combined adsorption-photocatalysis assays. The composites prepared by calcination at 400 °C exhibited much better performance than those synthesized at 500 °C, being the C400 composite the most effective one. Furthermore, some synthetic waters containing dissolved species and environmental waters were used to investigate the effect of the aqueous matrix on each drug removal. In general, photocatalyst deactivation was found in synthetic and environmental waters. This was particularly evident in the experiments performed with bicarbonate ions as well as with wastewater effluent. In contrast, tests conducted in seawater showed adsorption and photocatalytic degradation yields comparable to those obtained in deionized water. Considering the peculiarities of substrate competition in each aqueous matrix, the combined adsorption-photolysis treatment generally increased the overall elimination of drugs in water.