Development of Emu oil-loaded PCL/collagen bioactive nanofibers for proliferation and stemness preservation of human adipose-derived stem cells: possible application in regenerative medicine

Silver nanoparticles mediated apoptosis and cell cycle arrest in lung cancer A549

The present study was aimed to synthesize the silver nanoparticles from Alangium salvifolium Wang. and evaluating its biomedical applications. The leaves of A. salvifolium collected and subjected for the standard procedure of Soxhlet extraction using distilled water as a solvent. With the help of an aqueous extract AgNPs were synthesized from silver nitrate using phyto-reduction method. Further, synthesized AgNPs were characterized using several analytical techniques such as UV, FTIR, SEM-EDX, XRD, particles size and zeta potential. Synthesized AgNPs were tested for antibacterial, antioxidant, anticancer for lung cancer cell line and flowcytometry-based pathway studies. The visual observation confirmed the formation of AgNPs from the aqueous extract by changing yellow to brown colour formation. Further, characterization techniques also confirmed the formation of AgNPs. Antibacterial activity results showed that the tested AgNPs were potent against bacterial pathogens with a higher zone of inhibition. Further, the antioxidant and anticancer activity of AgNPs revealed that the AgNPs have exhibited significant results with a good percentage of inhibition. Further, the flow cytometry studies confirmed that the AgNPs inducing apoptosis and cell cycle arrest in lung cancer. The phytochemicals of A. salvifolium plant have successfully synthesized AgNPs. In the case of performed biological activity, the synthesized silver nanoparticles exhibited potent activity. In future these AgNPs can be taken for molecular and in vivo studies to identify their efficacy using in vivo and molecular models.

Mesenchymal stem cell secretome: A promising therapeutic strategy for erectile dysfunction?

Objective

The secretome, comprising bioactive chemicals released by mesenchymal stem cells (MSCs), holds therapeutic promise in regenerative medicine. This review aimed to explore the therapeutic potential of the MSC secretome in regenerative urology, particularly for treating erectile dysfunction (ED), and to provide an overview of preclinical and clinical research on MSCs in ED treatment and subsequently to highlight the rationales, mechanisms, preclinical investigations, and therapeutic potential of the MSC secretome in this context.

Methods

The review incorporated an analysis of preclinical and clinical research involving MSCs in the treatment of ED. Subsequently, it delved into the existing knowledge regarding the MSC secretome, exploring its therapeutic potential. The methods included a comprehensive examination of relevant literature to discern the processes underlying the therapeutic efficacy of the MSC secretome.

Results

Preclinical research indicated the effectiveness of the MSC secretome in treating various models of ED. However, the precise mechanisms of its therapeutic efficacy remain unknown. The review provided insights into the anti-inflammatory, pro-angiogenic, and trophic properties of the MSC secretome. It also discussed potential advantages, such as avoiding issues related to cellular therapy, including immunogenicity, neoplastic transformation, and cost.

Conclusion

This review underscores the significant therapeutic potential of the MSC secretome in regenerative urology, particularly for ED treatment. While preclinical studies demonstrate promising outcomes, further research is essential to elucidate the specific mechanisms underlying the therapeutic efficacy before clinical application. The review concludes by discussing future perspectives and highlighting the challenges associated with the clinical translation of the MSC secretome in regenerative urology.

Epidural Administration of Curcumin-Loaded Polycaprolactone/Gelatin Electrospun Nanofibers for Extended Analgesia After Laminectomy in Rats

Several clinical studies have reported the analgesic effect of curcumin (Curc) in various situations such as rheumatoid arthritis, osteoarthritis, and postsurgical pain. Therefore, in this work, Curc-loaded electrospun nanofibers (NFs) are designed to evaluate their sustained release on analgesic effect duration in rats after epidural placement via repeated formalin and tail-flick tests. The Curc-loaded polycaprolactone/gelatin NFs (Curc-PCL/GEL NFs) are prepared through an electrospinning technique and introduced to the rat's epidural space after laminectomy. The physicochemical and morphology features of the prepared Curc-PCL/GEL NFs were characterized via FE-SEM, FTIR, and degradation assay. The in vitro and in vivo concentrations of Curc were measured to evaluate the analgesic efficacy of the drug-loaded NFs. Rat nociceptive responses are investigated through repeated formalin and tail-flick tests for 5 weeks after the placement of NFs. Curc had a sustained release from the NFs for 5 weeks, and its local pharmaceutical concentrations were much greater than plasma concentrations. Rat's pain scores in both early and late phases of the formalin test were remarkably decreased in the experimental period. Rat's tail-flick latency was remarkably enhanced and remained constant for up to 4 weeks. Our findings show that the Curc-PCL/GEL NFs can supply controlled release of Curc to induce extended analgesia after laminectomy.

3D printed Styrax Liquidus (Liquidambar orientalis Miller)-loaded poly (L-lactic acid)/chitosan based wound dressing material: Fabrication, characterization, and biocompatibility results

The medicinal plant of Styrax liquidus (ST) (sweet gum balsam) which extracted from Liquidambar orientalis Mill tree, was loaded into the 3D printed polylactic acid (PLA)/chitosan (CS) based 3D printed scaffolds to investigate its wound healing and closure effect, in this study. The morphological and chemical properties of the ST loaded 3D printed scaffolds with different concentrations (1 %, 2 %, and 3 % wt) were investigated by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FT-IR), respectively. In addition, the mechanical and thermal properties of the materials were investigated by Tensile test and Differential Scanning Calorimetry (DSC), respectively. The antimicrobial activities of the ST loaded 3D printed scaffolds and their incubation media in the PBS (pH 7.4, at 37 °C for 24 h) were investigated on two Gram-positive and two Gram-negative standard pathogenic bacteria with the agar disc diffusion method. The colorimetric MTT assay was used to determine the cell viability of human fibroblast cells (CCD-1072Sk) incubated with free ST, ST loaded, and unloaded 3D printed scaffolds. The 1 % and 2 % (wt) ST loaded PLA/CS/ST 3D printed scaffolds showed an increase in the cell number. Annexin V/PI double stain assay was performed to test whether early or late apoptosis was induced in the PLA/CS/1 % ST and PLA/CS/2 % ST loaded groups and the results were consistent with the MTT assay. Furthermore, a wound healing assay was carried out to investigate the effect of ST loaded 3D printed scaffolds on wound healing in CCD-1072Sk cells. The highest wound closure compared to the control group was observed on cells treated with PLA/CS/1 % ST for 72 h. According to the results, novel biocompatible ST loaded 3D printed scaffolds with antimicrobial effect can be used as wound healing material for potential tissue engineering applications.

Potential application of inorganic nano-materials in modulation of macrophage function: Possible application in bone tissue engineering

Nanomaterials indicate unique physicochemical properties for drug delivery in osteogenesis. Benefiting from high surface area grades, high volume ratio, ease of functionalization by biological targeting moieties, and small size empower nanomaterials to pass through biological barriers for efficient targeting. Inorganic nanomaterials for bone regeneration include inorganic synthetic polymers, ceramic nanoparticles, metallic nanoparticles, and magnetic nanoparticles. These nanoparticles can effectively modulate macrophage polarization and function, as one of the leading players in osteogenesis. Bone healing procedures in close cooperation with the immune system. Inflammation is one of the leading triggers of the bone fracture healing barrier. Macrophages commence anti-inflammatory signaling along with revascularization in the damaged site to promote the formation of a soft callus, bone mineralization, and bone remodeling. In this review, we will discuss the role of macrophages in bone hemostasis and regeneration. Furthermore, we will summarize the influence of the various inorganic nanoparticles on macrophage polarization and function in the benefit of osteogenesis.

Carbon nanoparticles-based hydrogel nanocomposite induces bone repair in vivo

The main objective of the current study is to fabricate a 3D scaffold using alginate hydrogel implemented with carbon nanoparticles (CNPs) as the filler. The SEM imaging revealed that the scaffold possesses a porous internal structure with interconnected pores. The swelling value of the scaffolds (more than 400%) provides a wet niche for bone cell proliferation and migration. The in vitro evaluations showed that the scaffolds were hemocompatible (with hemolysis induction lower than 5%) and cytocompatible (inducing significant proliferative effect (cell viability of 121 ± 4%, p < 0.05) for AlG/CNPs 10%). The in vivo studies showed that the implantation of the fabricated 3D nanocomposite scaffolds induced a bone-forming effect and mediated bone formation into the induced bone defect. In conclusion, these results implied that the fabricated NFC-integrated 3D scaffold exhibited promising characteristics beneficial for bone regeneration and can be applied as the bone tissue engineering scaffold.

Sirolimus-exuding core-shell nanofibers as an implantable carrier for breast cancer therapy: preparation, characterization, in vitro cell studies, and in vivo anti-tumor activity

OBJECTIVE

Breast cancer accounts for significant mortality worldwide. Here, we develop a localized, sustained-release delivery system for breast cancer therapy.

METHODS

Sirolimus (SIR) core-shell nanofibers (NFs) are fabricated by coaxial electrospinning with poly(ε-caprolactone) (PCL) for the core and chitosan and PCL for the shell. The NFs were characterized by SEM, AFM, TEM, XRD, FTIR, water uptake, water contact angle, mechanical properties, drug content, and in vitro release. In vitro and in vivo anticancer effects were investigated.

RESULTS

A sustained release behavior is observed during 480 h that is more extended compared to monoaxial NFs. In vitro cytotoxicity and Annexin V/propidium iodide assays indicate that SIR-loaded coaxial NFs are effective in inhibiting proliferation of 4T1 and MCF-7 cells. Implantation of SIR NFs in 4T1 breast tumor-bearing mice inhibits tumor growth significantly compared to free drug. Histopathological examination shows that suppression of tumor growth by SIR NFs is associated with apoptotic cell death. Furthermore, anti-cancer effects are also confirmed by decreased expression levels of Ki-67, MMP-2, and MMP-9. Histological observation of organs, serological analyses, and the lack of body weight changes indicate in vivo safety of SIR NFs.

CONCLUSIONS

Altogether, we show here that incorporation of SIR into core-shell NFs could act as an effective drug release depot and induce a sustained antitumor response.

Harnessing rat derived model cells to assess the toxicity of TiO2 nanoparticles

Until now, a few studies have been conducted on the destructive effects of TiO2 NPs in living organisms, and studies on the toxicity of TiO2 NPs are still in the beginning phases. Because of the widespread use of TiO2 NPs in all areas of human life, it is essential to study their profound and fundamental toxic effects on each organ and body cell. Herein, we evaluate the effect of exposure to TiO2 NPs on in vitro models derived from the rat bone marrow and adipose tissues. Exposure to TiO2 NPs at 100 and 200 μg/ml exhibited cytotoxicity for the rat bone marrow mesenchymal stem cells (rBMSCs) and rat adipose mesenchymal stem cells (rATSC), respectively. Additionally, reduced rBMSCs and rATSCs frequencies in the S phase of the cell cycle. Moreover, TiO2 NPs enhanced the activity of cellular senescence-associated β-galactosidase in both model cells. Significantly higher relative expression of aging-related genes P53 and NF-kB (p < 0.05) and lower expression levels of anti-aging-related genes Nanog and SIRT1 were found in the treated cells (p < 0.05). Colony-forming and DAPI staining showed the reduction of cell growth and DNA damage in both rBMSCs and rATSCs. Our findings along with other similar findings showed that TiO2 NPs probably have negative effects on the cell growth, prompt the cells for entry into proliferation stop, DNA damage, and trigger the aging process. Graphical abstract.

In vitro expansion of human adipose-derived stem cells with delayed senescence through dual stage release of curcumin from mesoporous silica nanoparticles/electrospun nanofibers

Electrospun nanofibers (NFs) were utilized to realize the dual-stage release of curcumin (Curc) to fully support the attachment, viability and proliferation of adipose-derived stem cells (hADSCs) with a delay in cellular senescence. For this purpose, both free Curc and Curc-loaded mesoporous silica nanoparticles (Curc@MSNs) were integrated into the electrospun polycaprolactone/gelatin (PCL/GEL) nanofibrous scaffolds and characterized via FTIR, BET, FE-SEM and TEM. In vitro drug release results demonstrated strong dual stage-discharge of Curc from the Curc/Curc@MSNs-NFs. Because of the combination of initial rapid release and late extended drug release, hADSCs cultured on the Curc/Curc@MSNs-NFs showed the greatest adhesion, metabolic activity and proliferation rate with a fibroblastic phenotype after 28 days of culture. Besides, a significant reduction in senescence-associated lysosomal α-L-fucosidase (SA-α-Fuc) expression and activity was also measured in hADSCs cultured on the Curc/Curc@MSNs-NFs. Moreover, not only the expression of hTERT in mRNA and protein levels was considerably increased in hADSCs seeded on the Curc/Curc@MSNs-NFs, but also the telomerase activity and telomere length were significantly enhanced in the scaffolds compared to the other types of scaffolds and control group. These results uncovered the potential of the two-stage discharge profile of Curc from Curc/Curc@MSNs-NFs to provide the biofunctionality of long-term cultured hADSCs for efficient stem cell-based regenerative therapies.

Preparation and characterization of poly (lactic-co-glycolic acid) nanofibers containing simvastatin coated with hyaluronic acid for using in periodontal tissue engineering

Periodontal diseases can lead to soft tissue defects. Tissue engineering can provide functional replacements for damaged tissues. Recently, electrospun nanofibers have attracted great interest for tissue engineering and drug delivery applications. This has been revealed that statins exhibit positive impacts on the proliferation and regeneration of periodontal tissues. Electrospun simvastatin loaded poly (lactic-co-glycolic acid) (SIM-PLGA-NF) were prepared using electrospinning technique. Optimal conditions for preparation of SIM-PLGA-NF (PLGA concentration of 30 wt%, voltage of 15 kV, and flow rate of 1.5 ml h^-1 ) were identified using a 2³ factorial design. The optimized SIM-PLGA-NFs (diameter of 640.2 ± 32.5 nm and simvastatin entrapment efficacy of 99.6 ± 1.5%) were surface modified with 1% w/v hyaluronic acid solution (1%HA- SIM-PLGA-NF) to improve their compatibility with fibroblasts and potential application as a periodontal tissue engineering scaffold. HA-SIM-PLGA NFs were analyzed using SEM, FTIR, and XRD. 1%HA-SIM-PLGA-NF had uniform, bead-free and interwoven morphology, which is similar to the extracellular matrix. The mechanical performance of SIM-PLGA-NFs and release profile of simvastatin from these nanofibers have been also greatly improved after coating with HA. In vitro cellular tests showed that the proliferation, adhesion, and differentiation of fibroblast cells positively enhanced on the surface of 1%HA- SIM-PLGA-NF. These results demonstrate the potential application of 1%HA-SIM-PLGA-NFs as a scaffold for periodontal tissue engineering.

Review on Electrospun Nanofiber-Applied Products

Electrospinning technology, which was previously known as a scientific interdisciplinary research approach, is now ready to move towards a practice-based interdisciplinary approach in a variety of fields, progressively. Electrospun nanofiber-applied products are made directly from a nonwoven fabric-based membranes prepared from polymeric liquids involving the application of sufficiently high voltages during electrospinning. Today, electrospun nanofiber-based materials are of remarkable interest across multiple fields of applications, such as in electronics, sensors, functional garments, sound proofing, filters, wound dressing and scaffolds. This article presents such a review for summarizing the current progress on the manufacturing scalability of electrospun nanofibers and the commercialization of electrospun nanofiber products by dedicated companies globally. Despite the clear potential and limitless possibilities for electrospun nanofiber applications, the uptake of electrospinning by the industry is still limited due to the challenges in the manufacturing and turning of electrospun nanofibers into physical products. The recent developments in the field of electrospinning, such as the prominent nonwoven technology, personal views and the potential path forward for the growth of commercially applied products based on electrospun nanofibers, are also highlighted.

The potentials of umbilical cord-derived mesenchymal stem cells in the treatment of multiple sclerosis

Stem cell therapy has indicated a promising treatment capacity for tissue regeneration. Multiple sclerosis is an autoimmune-based chronic disease, in which the myelin sheath of the central nervous system is destructed. Scientists have not discovered any cure for multiple sclerosis, and most of the treatments are rather palliative. The pursuit of a versatile treatment option, therefore, seems essential. The immunoregulatory and non-chronic rejection characteristics of mesenchymal stem cells, as well as their homing properties, recommend them as a prospective treatment option for multiple sclerosis. Different sources of mesenchymal stem cells have distinct characteristics and functional properties; in this regard, choosing the most suitable cell therapy approach seems to be challenging. In this review, we will discuss umbilical cord/blood-derived mesenchymal stem cells, their identified exclusive properties compared to another adult mesenchymal stem cells, and the expectations of their potential roles in the treatment of multiple sclerosis.

Cellular Stemness Maintenance of Human Adipose-Derived Stem Cells on ZnO Nanorod Arrays

Ever-growing tissue regeneration and other stem cell therapies cause pressing need for large population of self-renewable stem cells. However, stem cells gradually lose their stemness after long-term in vitro cultivation. In this study, a ZnO nanorod (ZnO NR) array is used to maintain the stemness of human adipose-derived stem cells (hADSCs). The results prove that after culturing hADSCs on ZnO NRs for 3 weeks, the stemness genes and protein expression level are higher than that on culture plates and ZnO film. ZnO NRs can maintain stemness of hADSCs without inhibiting the cell proliferation and oriented differentiation capabilities. KLF4 (Kruppel-like factor 4) is a Zn²⁺ -binding gene that plays a vital role in cell proliferation and differentiation. Sustained Zn²⁺ release and the increased expression of KLF4 can be detected, suggesting that ZnO NRs have efficiently released Zn²⁺ for stemness maintenance. Taken together, the nanotopography of ZnO NRs and the Zn²⁺ release synergistically facilitate stemness maintenance. This study has provided a powerful tool for directing cell fate, maintaining stemness, and realizing the expansion of stem cells in vitro, which will open a new route for the manufacture of large populations of stem cells and fulfilling the growing demand for the cell therapy market.

Recent advances on nanomaterials-based fluorimetric approaches for microRNAs detection

MicroRNAs are types of small single-stranded endogenous highly conserved non-coding RNAs, which play main regulatory functions in a wide range of cellular and physiological events, such as proliferation, differentiation, neoplastic transformation, and cell regeneration. Recent findings have proved a close association between microRNAs expression and the development of many diseases, indicating the importance of microRNAs as clinical biomarkers and targets for drug discovery. However, due to a number of prominent characteristics like small size, high sequence similarity and low abundance, sensitive and selective identification of microRNAs has rather been a hardship through routine traditional assays, including quantitative polymerase chain reaction, microarrays, and northern blotting analysis. More recently, the soaring progression in nanotechnology and fluorimetric methodologies in combination with nanomaterials have promised microRNAs detection with high sensitivity, efficiency and selectivity, excellent reproducibility and lower cost. Therefore, this review will represent an overview of latest advances in microRNAs detection through nanomaterials-based fluorescent methods, like gold nanoparticles, silver and copper nanoclusters, graphene oxide, and magnetic silicon nanoparticles.

Synergistic Antiproliferative Effects of Co-nanoencapsulated Curcumin and Chrysin on MDA-MB-231 Breast Cancer Cells Through Upregulating miR-132 and miR-502c

In this study, we explored whether co-nanoencapsulated Curcumin (Cur) and Chrysin (Chr), natural herbal compounds with antitumor activities, regulate miR-132 and miR-502c and their downstream targets, leading to the synergistic growth inhibition in MDA-MB-231 breast cancer cells. For this purpose, Cur and Chr were co-encapsulated into PLGA-PEG nanoparticles (NPs) and characterized through DLS, FTIR and FE-SEM. MTT assay and cell cycle arrest analysis revealed that CurChr-loaded NPs had a considerable synergistic cytotoxicity against MDA-MB-231 cells with more cell accumulation in G2/M phase compared to the other groups. In addition, highest percentage of cell apoptosis was acquired in cells treated with CurChr-loaded NPs according to apoptosis analysis. Real-time PCR findings revealed that co-encapsulated form of Cur and Chr than free combination could further upregulate miR-132 and miR-502c expression (P < 0.001). Also, the strong reduction was detected in the protein levels of HN1 and P65 at the cells co-nanodelivered with Cur and Chr. These findings demonstrated that the co-nanodelivery of Cur and Chr through targeting miR-132 and miR-205c might be a novel strategy for the treatment of breast cancer.

Spotlight on 17-AAG as an Hsp90 inhibitor for molecular targeted cancer treatment

Hsp90 is a ubiquitous chaperone with important roles in the organization and maturation of client proteins that are involved in the progression and survival of cancer cells. Multiple oncogenic pathways can be affected by inhibition of Hsp90 function through degradation of its client proteins. That makes Hsp90 a therapeutic target for cancer treatment. 17-allylamino-17-demethoxy-geldanamycin (17-AAG) is a potent Hsp90 inhibitor that binds to Hsp90 and inhibits its chaperoning function, which results in the degradation of Hsp90's client proteins. There have been several preclinical studies of 17-AAG as a single agent or in combination with other anticancer agents for a wide range of human cancers. Data from various phases of clinical trials show that 17-AAG can be given safely at biologically active dosages with mild toxicity. Even though 17-AAG has suitable pharmacological potency, its low water solubility and high hepatotoxicity could significantly restrict its clinical use. Nanomaterials-based drug delivery carriers may overcome these drawbacks. In this paper, we review preclinical and clinical research on 17-AAG as a single agent and in combination with other anticancer agents. In addition, we highlight the potential of using nanocarriers and nanocombination therapy to improve therapeutic effects of 17-AAG.

Biomimetic synthesis of silver nanoparticles using Matricaria chamomilla extract and their potential anticancer activity against human lung cancer cells

Herbs having various natural substances can be utilized for the biosynthesis of Silver nanoparticles (AgNPs) and act as a stable, reliable and biocompatible alternative instead of the current physical and chemical approaches. It has been reported that Matricaria chamomilla possesses unique properties, especially anti-cancerous effects. The objective of the current work was to assess the chemical characteristics and anticancer effects of biosynthesized AgNPs applying aqueous extracts of M. chamomilla against A549 lung cancer cells. UV-visible spectrum showed the maximum absorption of the biosynthesized AgNPs at 430 nm. The crystalline structure of biosynthesized AgNPs in optimal conditions was confirmed by XRD. Moreover, the presence of Ag as the ingredient element was exhibited via EDX analysis. FT-IR results also verified the AgNPs synthesis using a plant extract. The spherical shapes of the AgNPs with an average diameter size around 45.12 nm and a zeta potential value of -34 mV were characterized using DLS, and confirmed through FE-SEM and TEM. In vitro cytotoxicity assay using MTT revealed that the biosynthesized AgNPs exhibited a dose- and time- dependent cytotoxic effect against A549 lung cancer cells. Moreover, the apoptotic effects of the AgNPs were demonstrated using DAPI staining, real-time PCR and flow cytometry. According to these findings, using M. chamomilla in combination with AgNPs via green-synthesis approach may be an efficient strategy for effective treatment of lung cancer.

Direct Control of Stem Cell Behavior Using Biomaterials and Genetic Factors

Stem cells have recently emerged as an important candidate for cell therapy. However, some major limitations still exist such as a small quantity of cell supply, senescence, and insufficient differentiation efficiency. Therefore, there is an unmet need to control stem cell behavior for better clinical performance. Since native microenvironment factors including stem cell niche, genetic factors, and growth factors direct stem cell fate cooperatively, user-specified in vitro settings are required to understand the regulatory roles and effects of each factor, thereby applying the factors for improved cell therapy. Among others, various types of biomaterials and transfection method have been employed as key tools for development of the in vitro settings. This review focuses on the current strategies to improve stemness maintenance, direct differentiation, and reprogramming using biomaterials and genetic factors without any aids from additional biochemicals and growth factors.

Telomerase activity and telomere on stem progeny senescence

The end of linear chromosomes is formed of a special nucleoprotein heterochromatin structure with repetitive TTAGGG sequences called telomere. Telomere length is regulated by a special enzyme called telomerase, a specific DNA polymerase that adds new telomeric sequences to the chromosome ends. Telomerase consists of two parts; the central protein part and the accessory part which is a RNA component transported by the central part. Regulation of telomere length by this enzyme is a multi-stage process. Telomere length elongation is strongly influenced by the level of telomerase and has a strong correlation with the activity of telomerase enzyme. Human Telomerase Reverse Transcriptase (hTERT) gene expression plays an important role in maintaining telomere length and high proliferative property of cells. Except a low activity of telomerase enzyme in hematopoietic and few types of stem cells, most of somatic cells didn't showed telomerase activity. Moreover, cytokines are secretory proteins that control many aspects of hematopoiesis, especially immune responses and inflammation. Also, the induction of hTERT gene expression by cytokines is organized through the PI3K/AKT and NF/kB signaling pathways. In this review we have tried to talk about effects of immune cell cytokines on telomerase expression/telomere length and the induction of telomerase expression by cytokines.

Macrophage repolarization using emu oil-based electrospun nanofibers: possible application in regenerative medicine

In the regenerative medicine therapies, the availability of engineered scaffolds that modulate inflammatory states is highly required. The aim of this study was to evaluate the efficiency of electrospun nanofibrous scaffolds containing natural substances with anti-inflammatory properties such as Emu oil (EO) to control inflammation and re-polarization of macrophages toward M2 anti-inflammatory phonotype. For this purpose, bead free and smooth EO-blended PCL/PEG electrospun nanofibrous mats were successfully fabricated and characterized using FE-SEM, FTIR, and Universal Testing Machine. GC/MS findings of pure EO revealed the fatty acids composition. MTT results showed that macrophage viability on EO-PCL/PEG nanofibres was higher than on PCL/PEG nanofibres and control (p ≤ .05). Additionally, the presence of EO into nanofibres was found to influence on macrophage morphologies, using FE-SEM. qPCR results showed a reduction in iNOS-2 and an increase in Arg-1 levels of macrophages seeded on EO-PCL/PEG nanofibres, indicating the successfully polarization of the macrophages to M2 phenotype. The change in macrophage phenotype on EO-based nanofibres could suppress the inflammation in LPS/IFN-γ stimulated macrophages as evidenced by a major reduction in pro-inflammatory cytokine levels TNF-α, IL-1β, and IL-6. Conclusively, the results demonstrated that EO-based nanofibres efficiently modulated RAW264.7 macrophage polarity toward an anti-inflammatory M2 phenotype.