1
|
Couți N, Porfire A, Iovanov R, Crișan AG, Iurian S, Casian T, Tomuță I. Polyvinyl Alcohol, a Versatile Excipient for Pharmaceutical 3D Printing. Polymers (Basel) 2024; 16:517. [PMID: 38399895 PMCID: PMC10893462 DOI: 10.3390/polym16040517] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/29/2023] [Revised: 02/02/2024] [Accepted: 02/09/2024] [Indexed: 02/25/2024] Open
Abstract
Three-dimensional (3D) printing in the pharmaceutical field allows rapid manufacturing of a diverse range of pharmaceutical dosage forms, including personalized items. The application of this technology in dosage form manufacturing requires the judicious selection of excipients because the selected materials must be appropriate to the working principle of each technique. Most techniques rely on the use of polymers as the main material. Among the pharmaceutically approved polymers, polyvinyl alcohol (PVA) is one of the most used, especially for fused deposition modeling (FDM) technology. This review summarizes the physical and chemical properties of pharmaceutical-grade PVA and its applications in the manufacturing of dosage forms, with a particular focus on those fabricated through FDM. The work provides evidence on the diversity of dosage forms created using this polymer, highlighting how formulation and processing difficulties may be overcome to get the dosage forms with a suitable design and release profile.
Collapse
Affiliation(s)
| | - Alina Porfire
- Department of Pharmaceutical Technology and Biopharmacy, Faculty of Pharmacy, University of Medicine and Pharmacy “Iuliu Hatieganu”, 400012 Cluj-Napoca, Romania; (N.C.); (R.I.); (A.G.C.); (S.I.); (T.C.); (I.T.)
| | | | | | | | | | | |
Collapse
|
2
|
Durga Prasad Reddy R, Sharma V. Investigations of hybrid infill pattern in additive manufactured tablets: A novel approach towards tunable drug release. J Biomed Mater Res B Appl Biomater 2023; 111:1869-1882. [PMID: 37294096 DOI: 10.1002/jbm.b.35290] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2022] [Revised: 02/08/2023] [Accepted: 05/18/2023] [Indexed: 06/10/2023]
Abstract
The significance of 3D printing has risen exponentially in biomedical and pharmaceutical applications. Its potential in the field of fabricating drug delivery systems, by virtue of processing biocompatible polymers, has been very lucrative. This work aims to tap the interstitial drug delivery kinetics that are often inaccessible through machine-specific infill patterns in additive manufactured tablets fabricated using PVA biopolymer as an excipient. In this regard, a myo-inositol containing tablet has been printed using Fused Deposition Modeling preceded by Hot Melt Extrusion drug loading route. Two machine-specific infill patterns were taken, namely straight and grid. Later, these two distinct patterns were juxtaposed to obtain novel hybrid infill patterns in the tablets. Then, these tablets and their filament were subjected to various thermal, mechanical, imaging and pharmaceutical characterization tests to assess the feasibility of the research attempt. Finally, dissolution tests were conducted to evaluate their dissolution behavior over a time period. The characterization tests proved the scientific viability of this attempt along with amorphous existence of drug in the polymeric filament. The dissolution results showed favorable drug release by achieving interstitial dissolution timings with surface area/volume (SA/V) ratio being found to be the principal factor.
Collapse
Affiliation(s)
- R Durga Prasad Reddy
- Department of Mechanical and Industrial Engineering, Additive and Subtractive Manufacturing (ASM) Laboratory, IIT Roorkee, Roorkee, India
| | - Varun Sharma
- Department of Mechanical and Industrial Engineering, IIT Roorkee, Roorkee, India
| |
Collapse
|
3
|
Katsiotis CS, Strømme M, Welch K. Processability of mesoporous materials in fused deposition modeling for drug delivery of a model thermolabile drug. Int J Pharm X 2022; 5:100149. [PMID: 36593988 PMCID: PMC9804103 DOI: 10.1016/j.ijpx.2022.100149] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/30/2022] [Revised: 12/13/2022] [Accepted: 12/16/2022] [Indexed: 12/23/2022] Open
Abstract
The incorporation of drug-loaded mesoporous materials in dosage forms prepared with fused deposition modeling (FDM) has shown the potential to solve challenges relating to additive manufacturing techniques, such as the stability of poorly-soluble drugs in the amorphous state. However, the addition of these non-melting mesoporous materials significantly affects the mechanical properties of the filament used in FDM, which in turn affects the printability of the feedstock material. Therefore, in this study a full-factorial experimental design was utilized to investigate different processing parameters of the hot melt extrusion process, their effect on various mechanical properties and the potential correlation with the filaments' printability. The thermolabile, poorly-soluble drug ibuprofen was utilized as a model drug to assess the potential of two mesoporous materials, Mesoporous Magnesium Carbonate (MMC) and a silica-based material (MCM-41), to thermally protect the loaded drug. Factorial and principal components analysis displayed a correlation between non-printable MCM-41 filaments and their mechanical properties where printable filaments had a maximum stress >7.5 MPa and a Young's modulus >83 MPa. For MMC samples there was no clear correlation, which was in large part attributed to the filaments' inconsistencies and imperfections. Finally, both mesoporous materials displayed a thermal protective feature, as the decomposition due to the thermal degradation of a significant portion of the thermolabile drug was shifted to higher temperatures post-loading. This highlights the potential capability of such a system to be implemented for thermosensitive drugs in FDM applications.
Collapse
|
4
|
Suryavanshi P, Chaudhari VS, Banerjee S. Customized 3D-printed hollow capsular device filled with norfloxacin-loaded micropellets for controlled-release delivery. Drug Deliv Transl Res 2022; 13:1183-1194. [PMID: 35776385 DOI: 10.1007/s13346-022-01198-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 06/13/2022] [Indexed: 11/03/2022]
Abstract
Pharmacotherapy has become more focused on the personalized treatment of patients with various diseases. This field of pharmacology and pharmacogenomics focuses on developing drug delivery systems designed to address the unique characteristics of individual patients. Three-dimensional printing technology can be used to fabricate personalized drug delivery systems with desired release properties according to patient needs. Norfloxacin (NOR)-loaded micropellets (MPs) were fabricated and filled inside a stereolithography (SLA) 3D printing technology-mediated hollow capsular device in accordance with a standard size of 09 (8.4 mm length × 2.70 mm diameter). The prepared 3D-printed hollow capsular device filled with pristine NOR and NOR-loaded MPs were characterized in terms of both in vitro and in vivo means. MPs with the particle size distribution of 1540.0 ± 26 µm showed 95.63 ± 2.0% NOR content with pellet-shaped surface morphology. The in vitro release profile showed an initial lag phase of approximately 30 min, followed by the sustained release of NOR from MPs from the 3D-printed hollow capsular device. The pharmacokinetic profile showed prolonged Tmax, AUC, and evidence of good RBA of NOR compared to pure NOR after a single oral administration in the experimental animal model. The overall results confirm the feasibility of SLA-mediated 3D printing technology for preparing customized solid oral unit dosage carriers that can be filled with pure NOR- and NOR-loaded MPs with controlled-release delivery features.
Collapse
Affiliation(s)
- Purushottam Suryavanshi
- Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research (NIPER)-Guwahati, Changsari, 781101, Assam, India
| | - Vishal Sharad Chaudhari
- Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research (NIPER)-Guwahati, Changsari, 781101, Assam, India
| | - Subham Banerjee
- Department of Pharmaceutics, National Institute of Pharmaceutical Education and Research (NIPER)-Guwahati, Changsari, 781101, Assam, India.
| |
Collapse
|
5
|
Stefano JS, Kalinke C, da Rocha RG, Rocha DP, da Silva VAOP, Bonacin JA, Angnes L, Richter EM, Janegitz BC, Muñoz RAA. Electrochemical (Bio)Sensors Enabled by Fused Deposition Modeling-Based 3D Printing: A Guide to Selecting Designs, Printing Parameters, and Post-Treatment Protocols. Anal Chem 2022; 94:6417-6429. [PMID: 35348329 DOI: 10.1021/acs.analchem.1c05523] [Citation(s) in RCA: 35] [Impact Index Per Article: 17.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
The 3D printing (or additive manufacturing, AM) technology is capable to provide a quick and easy production of objects with freedom of design, reducing waste generation. Among the AM techniques, fused deposition modeling (FDM) has been highlighted due to its affordability, scalability, and possibility of processing an extensive range of materials (thermoplastics, composites, biobased materials, etc.). The possibility of obtaining electrochemical cells, arrays, pieces, and more recently, electrodes, exactly according to the demand, in varied shapes and sizes, and employing the desired materials has made from 3D printing technology an indispensable tool in electroanalysis. In this regard, the obtention of an FDM 3D printer has great advantages for electroanalytical laboratories, and its use is relatively simple. Some care has to be taken to aid the user to take advantage of the great potential of this technology, avoiding problems such as solution leakages, very common in 3D printed cells, providing well-sealed objects, with high quality. In this sense, herein, we present a complete protocol regarding the use of FDM 3D printers for the fabrication of complete electrochemical systems, including (bio)sensors, and how to improve the quality of the obtained systems. A guide from the initial printing stages, regarding the design and structure obtention, to the final application, including the improvement of obtained 3D printed electrodes for different purposes, is provided here. Thus, this protocol can provide great perspectives and alternatives for 3D printing in electroanalysis and aid the user to understand and solve several problems with the use of this technology in this field.
Collapse
Affiliation(s)
- Jéssica Santos Stefano
- Department of Nature Sciences, Mathematics and Education, Federal University of São Carlos, 13600-970, Araras, São Paulo, Brazil
| | - Cristiane Kalinke
- Institute of Chemistry, University of Campinas, 13083-859, Campinas, São Paulo, Brazil
| | - Raquel Gomes da Rocha
- Institute of Chemistry, Federal University of Uberlândia, 38400-902, Uberlândia, Minas Gerais, Brazil
| | - Diego Pessoa Rocha
- Institute of Chemistry, Department of Fundamental Chemistry, University of São Paulo, 05508-000, São Paulo, São Paulo, Brazil.,Department of Chemistry, Federal Institute of Paraná, 85200-000, Pitanga, Paraná, Brazil
| | | | - Juliano Alves Bonacin
- Institute of Chemistry, University of Campinas, 13083-859, Campinas, São Paulo, Brazil
| | - Lúcio Angnes
- Institute of Chemistry, Department of Fundamental Chemistry, University of São Paulo, 05508-000, São Paulo, São Paulo, Brazil
| | - Eduardo Mathias Richter
- Institute of Chemistry, Federal University of Uberlândia, 38400-902, Uberlândia, Minas Gerais, Brazil
| | - Bruno Campos Janegitz
- Department of Nature Sciences, Mathematics and Education, Federal University of São Carlos, 13600-970, Araras, São Paulo, Brazil
| | | |
Collapse
|
6
|
Saviano M, Bowles BJ, Penny MR, Ishaq A, Muwaffak Z, Falcone G, Russo P, Hilton ST. Development and analysis of a novel loading technique for FDM 3D printed systems: Microwave-assisted impregnation of gastro-retentive PVA capsular devices. Int J Pharm 2021; 613:121386. [PMID: 34921952 DOI: 10.1016/j.ijpharm.2021.121386] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/06/2021] [Revised: 12/08/2021] [Accepted: 12/10/2021] [Indexed: 11/29/2022]
Abstract
In this paper, we describe a modular post-printing loading protocol for a 3D printed gastro-retentive drug delivery system. Fused Deposition Modelling (FDM) 3D printing was exploited for the rapid prototyping of a modular floating system (caps-in-cap). Optimized models were produced as blank PVA scaffolds, and a morphological analysis of the FDM printed models was conducted to develop a straightforward protocol for drug-loading. The 3D printed gastro-retentive systems were then subjected to microwave irradiation in oversaturated solutions of anhydrous caffeine for drug loading, and research focused on an analysis of the impact of microwave irradiation on the chemical and physical properties of the polymer and the drug. The drug-loading efficiency, thermal and chemical characteristics of components, the stability of the drug and the morphology of processed printouts are characterised and described. Parameters of this unexplored microwave-assisted post-printing loading technique were evaluated and adequately set up, and the process resulted in the preservation of the polymeric matrix and enhancement of drug loading. Hence, microwave impregnation confirmed its potential in superseding the traditional pre- and post-printing loading methods, such as soaking techniques, being faster and more efficient and providing a new paradigm approach to personalised drug delivery.
Collapse
Affiliation(s)
- Marilena Saviano
- Department of Pharmacy, University of Salerno, Fisciano (SA), Italy; PhD Program in Drug Discovery and Development, University of Salerno, Fisciano (SA) Italy.
| | - Benjamin J Bowles
- Research Department of Pharmaceutical and Biological Chemistry, UCL (University College London), School of Pharmacy, London, UK
| | - Matthew R Penny
- Research Department of Pharmaceutical and Biological Chemistry, UCL (University College London), School of Pharmacy, London, UK
| | - Ahtsham Ishaq
- Research Department of Pharmaceutical and Biological Chemistry, UCL (University College London), School of Pharmacy, London, UK
| | - Zaid Muwaffak
- Research Department of Pharmaceutical and Biological Chemistry, UCL (University College London), School of Pharmacy, London, UK
| | - Giovanni Falcone
- Department of Pharmacy, University of Salerno, Fisciano (SA), Italy; PhD Program in Drug Discovery and Development, University of Salerno, Fisciano (SA) Italy
| | - Paola Russo
- Department of Pharmacy, University of Salerno, Fisciano (SA), Italy
| | - Stephen T Hilton
- Research Department of Pharmaceutical and Biological Chemistry, UCL (University College London), School of Pharmacy, London, UK.
| |
Collapse
|
7
|
Melnyk LA, Oyewumi MO. Integration of 3D printing technology in pharmaceutical compounding: Progress, prospects, and challenges. ANNALS OF 3D PRINTED MEDICINE 2021. [DOI: 10.1016/j.stlm.2021.100035] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/11/2023] Open
|
8
|
Eleftheriadis GK, Genina N, Boetker J, Rantanen J. Modular design principle based on compartmental drug delivery systems. Adv Drug Deliv Rev 2021; 178:113921. [PMID: 34390776 DOI: 10.1016/j.addr.2021.113921] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2021] [Revised: 07/21/2021] [Accepted: 08/09/2021] [Indexed: 12/28/2022]
Abstract
The current manufacturing solutions for oral solid dosage forms are fundamentally based on technologies from the 19th century. This approach is well suited for mass production of one-size-fits-all products; however, it does not allow for a straight-forward personalization and mass customization of the pharmaceutical end-product. In order to provide better therapies to the patients, a need for innovative manufacturing concepts and product design principles has been rising. Additive manufacturing opens up a possibility for compartmentalization of drug products, including design of spatially separated multidrug and functional excipient compartments. This compartmentalized solution can be further expanded to modular design thinking. Modular design is referring to combination of building blocks containing a given amount of drug compound(s) and related functional excipients into a larger final product. Implementation of modular design principles is paving the way for implementing the emerging personalization potential within health sciences by designing compartmental and reactive product structures that can be manufactured based on the individual needs of each patient. This review will introduce the existing compartmentalized product design principles and discuss the integration of these into edible electronics allowing for innovative control of drug release.
Collapse
Affiliation(s)
| | - Natalja Genina
- Department of Pharmacy, Faculty of Health and Medical Sciences, University of Copenhagen, DK-2100 Copenhagen, Denmark
| | - Johan Boetker
- Department of Pharmacy, Faculty of Health and Medical Sciences, University of Copenhagen, DK-2100 Copenhagen, Denmark
| | - Jukka Rantanen
- Department of Pharmacy, Faculty of Health and Medical Sciences, University of Copenhagen, DK-2100 Copenhagen, Denmark.
| |
Collapse
|
9
|
3D Printing of Thermo-Sensitive Drugs. Pharmaceutics 2021; 13:pharmaceutics13091524. [PMID: 34575600 PMCID: PMC8468559 DOI: 10.3390/pharmaceutics13091524] [Citation(s) in RCA: 21] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/18/2021] [Revised: 09/14/2021] [Accepted: 09/16/2021] [Indexed: 12/18/2022] Open
Abstract
Three-dimensional (3D) printing is among the rapidly evolving technologies with applications in many sectors. The pharmaceutical industry is no exception, and the approval of the first 3D-printed tablet (Spiratam®) marked a revolution in the field. Several studies reported the fabrication of different dosage forms using a range of 3D printing techniques. Thermosensitive drugs compose a considerable segment of available medications in the market requiring strict temperature control during processing to ensure their efficacy and safety. Heating involved in some of the 3D printing technologies raises concerns regarding the feasibility of the techniques for printing thermolabile drugs. Studies reported that semi-solid extrusion (SSE) is the commonly used printing technique to fabricate thermosensitive drugs. Digital light processing (DLP), binder jetting (BJ), and stereolithography (SLA) can also be used for the fabrication of thermosensitive drugs as they do not involve heating elements. Nonetheless, degradation of some drugs by light source used in the techniques was reported. Interestingly, fused deposition modelling (FDM) coupled with filling techniques offered protection against thermal degradation. Concepts such as selection of low melting point polymers, adjustment of printing parameters, and coupling of more than one printing technique were exploited in printing thermosensitive drugs. This systematic review presents challenges, 3DP procedures, and future directions of 3D printing of thermo-sensitive formulations.
Collapse
|
10
|
Gueche YA, Sanchez-Ballester NM, Cailleaux S, Bataille B, Soulairol I. Selective Laser Sintering (SLS), a New Chapter in the Production of Solid Oral Forms (SOFs) by 3D Printing. Pharmaceutics 2021; 13:1212. [PMID: 34452173 PMCID: PMC8399326 DOI: 10.3390/pharmaceutics13081212] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2021] [Revised: 08/01/2021] [Accepted: 08/03/2021] [Indexed: 12/12/2022] Open
Abstract
3D printing is a new emerging technology in the pharmaceutical manufacturing landscape. Its potential advantages for personalized medicine have been widely explored and commented on in the literature over recent years. More recently, the selective laser sintering (SLS) technique has been investigated for oral drug-delivery applications. Thus, this article reviews the work that has been conducted on SLS 3D printing for the preparation of solid oral forms (SOFs) from 2017 to 2020 and discusses the opportunities and challenges for this state-of-the-art technology in precision medicine. Overall, the 14 research articles reviewed report the use of SLS printers equipped with a blue diode laser (445-450 nm). The review highlights that the printability of pharmaceutical materials, although an important aspect for understanding the sintering process has only been properly explored in one article. The modulation of the porosity of printed materials appears to be the most interesting outcome of this technology for pharmaceutical applications. Generally, SLS shows great potential to improve compliance within fragile populations. The inclusion of "Quality by Design" tools in studies could facilitate the deployment of SLS in clinical practice, particularly where Good Manufacturing Practices (GMPs) for 3D-printing processes do not currently exist. Nevertheless, drug stability and powder recycling remain particularly challenging in SLS. These hurdles could be overcome by collaboration between pharmaceutical industries and compounding pharmacies.
Collapse
Affiliation(s)
- Yanis A. Gueche
- ICGM, University Montpellier, CNRS, ENSCM, 34000 Montpellier, France; (Y.A.G.); (N.M.S.-B.); (S.C.); (B.B.)
| | | | - Sylvain Cailleaux
- ICGM, University Montpellier, CNRS, ENSCM, 34000 Montpellier, France; (Y.A.G.); (N.M.S.-B.); (S.C.); (B.B.)
- Department of Pharmacy, Nîmes University Hospital, 30900 Nimes, France
| | - Bernard Bataille
- ICGM, University Montpellier, CNRS, ENSCM, 34000 Montpellier, France; (Y.A.G.); (N.M.S.-B.); (S.C.); (B.B.)
| | - Ian Soulairol
- ICGM, University Montpellier, CNRS, ENSCM, 34000 Montpellier, France; (Y.A.G.); (N.M.S.-B.); (S.C.); (B.B.)
- Department of Pharmacy, Nîmes University Hospital, 30900 Nimes, France
| |
Collapse
|
11
|
Pyteraf J, Jamróz W, Kurek M, Szafraniec-Szczęsny J, Kramarczyk D, Jurkiewicz K, Knapik-Kowalczuk J, Tarasiuk J, Wroński S, Paluch M, Jachowicz R. How to Obtain the Maximum Properties Flexibility of 3D Printed Ketoprofen Tablets Using Only One Drug-Loaded Filament? Molecules 2021; 26:molecules26113106. [PMID: 34067434 PMCID: PMC8196966 DOI: 10.3390/molecules26113106] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/19/2021] [Revised: 05/10/2021] [Accepted: 05/20/2021] [Indexed: 11/18/2022] Open
Abstract
The flexibility of dose and dosage forms makes 3D printing a very interesting tool for personalized medicine, with fused deposition modeling being the most promising and intensively developed method. In our research, we analyzed how various types of disintegrants and drug loading in poly(vinyl alcohol)-based filaments affect their mechanical properties and printability. We also assessed the effect of drug dosage and tablet spatial structure on the dissolution profiles. Given that the development of a method that allows the production of dosage forms with different properties from a single drug-loaded filament is desirable, we developed a method of printing ketoprofen tablets with different dose and dissolution profiles from a single feedstock filament. We optimized the filament preparation by hot-melt extrusion and characterized them. Then, we printed single, bi-, and tri-layer tablets varying with dose, infill density, internal structure, and composition. We analyzed the reproducibility of a spatial structure, phase, and degree of molecular order of ketoprofen in the tablets, and the dissolution profiles. We have printed tablets with immediate- and sustained-release characteristics using one drug-loaded filament, which demonstrates that a single filament can serve as a versatile source for the manufacturing of tablets exhibiting various release characteristics.
Collapse
Affiliation(s)
- Jolanta Pyteraf
- Department of Pharmaceutical Technology and Biopharmaceutics, Jagiellonian University Medical College, Medyczna 9, 30-688 Krakow, Poland; (J.P.); (W.J.); (J.S.-S.); (R.J.)
| | - Witold Jamróz
- Department of Pharmaceutical Technology and Biopharmaceutics, Jagiellonian University Medical College, Medyczna 9, 30-688 Krakow, Poland; (J.P.); (W.J.); (J.S.-S.); (R.J.)
| | - Mateusz Kurek
- Department of Pharmaceutical Technology and Biopharmaceutics, Jagiellonian University Medical College, Medyczna 9, 30-688 Krakow, Poland; (J.P.); (W.J.); (J.S.-S.); (R.J.)
- Correspondence: ; Tel.: +48-12-62-05-600
| | - Joanna Szafraniec-Szczęsny
- Department of Pharmaceutical Technology and Biopharmaceutics, Jagiellonian University Medical College, Medyczna 9, 30-688 Krakow, Poland; (J.P.); (W.J.); (J.S.-S.); (R.J.)
| | - Daniel Kramarczyk
- Department of Biophysics and Molecular Physics, Institute of Physics, University of Silesia, Uniwersytecka 4, 40-007 Katowice, Poland; (D.K.); (K.J.); (J.K.-K.); (M.P.)
- Silesian Center for Education and Interdisciplinary Research, University of Silesia, 75 Pulku Piechoty 1a, 41-500 Chorzow, Poland
| | - Karolina Jurkiewicz
- Department of Biophysics and Molecular Physics, Institute of Physics, University of Silesia, Uniwersytecka 4, 40-007 Katowice, Poland; (D.K.); (K.J.); (J.K.-K.); (M.P.)
- Silesian Center for Education and Interdisciplinary Research, University of Silesia, 75 Pulku Piechoty 1a, 41-500 Chorzow, Poland
| | - Justyna Knapik-Kowalczuk
- Department of Biophysics and Molecular Physics, Institute of Physics, University of Silesia, Uniwersytecka 4, 40-007 Katowice, Poland; (D.K.); (K.J.); (J.K.-K.); (M.P.)
- Silesian Center for Education and Interdisciplinary Research, University of Silesia, 75 Pulku Piechoty 1a, 41-500 Chorzow, Poland
| | - Jacek Tarasiuk
- Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland; (J.T.); (S.W.)
| | - Sebastian Wroński
- Faculty of Physics and Applied Computer Science, AGH University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, Poland; (J.T.); (S.W.)
| | - Marian Paluch
- Department of Biophysics and Molecular Physics, Institute of Physics, University of Silesia, Uniwersytecka 4, 40-007 Katowice, Poland; (D.K.); (K.J.); (J.K.-K.); (M.P.)
- Silesian Center for Education and Interdisciplinary Research, University of Silesia, 75 Pulku Piechoty 1a, 41-500 Chorzow, Poland
| | - Renata Jachowicz
- Department of Pharmaceutical Technology and Biopharmaceutics, Jagiellonian University Medical College, Medyczna 9, 30-688 Krakow, Poland; (J.P.); (W.J.); (J.S.-S.); (R.J.)
| |
Collapse
|