Chitin/chitosan derivatives and their interactions with microorganisms: a comprehensive review and future perspectives

Chitosan and its derivatives regulate lactic acid synthesis during milk fermentation

Introduction

The influence of chitosan's physicochemical characteristics on the functionality of lactic acid bacteria and the production of lactic acid remains very obscure and contradictory to date. While some studies have shown a stimulatory effect of oligochitosans on the growth of Lactobacillus spp, other studies declare a bactericidal effect of chitosan. The lack and contradiction of knowledge prompted us to study the effect of chitosan on the growth and productivity of L. bulgaricus in the presence of chitosan and its derivatives.

Methods

We used high molecular weight chitosan (350 kDa) and oligochitosans (25.4 and 45.3 kDa). The experiment was carried out with commercial strain of L. bulgaricus and the low fat skim cow milk powder reconstituted with sterile distilled water. After fermentation, dynamic viscosity, titratable acidity, pH, content of lactic acid, colony forming units, chitosan and oligochitosans radii were measured in the samples. Fermented dairy products were also examined using sodium dodecyl sulfate electrophoretic analysis, gas chromatography-mass spectrometry and light microscopy.

Results and discussion

The results of the study showed that when L. bulgaricus was cultured in the presence of 25.4 kDa oligochitosans at concentrations of 0.0025%, 0.005%, 0.0075% and 0.01%, the average rate of LA synthesis over 24 hours was 11.0 × 10-3 mol/L/h, 8.7 × 10-3 mol/L/h, 6.8 × 10-3 mol/L/h, 5.8 × 10-3 mol/L/h, respectively. The 45.3 kDa oligochitosans had a similar effect, while the average rate of lactic acid synthesis in the control sample was only 3.5 × 10-3 mol/L/h. Notably, 350 kDa chitosan did not affect the rate of lactic acid synthesis compared with the control sample. Interestingly, interaction of chitosan with L. bulgaricus led to a slowdown in the synthesis of propanol, an increase in the content of unsaturated and saturated fatty acids, and a change in the composition and content of other secondary metabolites. The quantity of L. bulgaricus in a sample with 0.01% chitosan exceeded their content in the control sample by more than 1,700 times. At the same chitosan concentration, the fermentation process was slowed down, increasing the shelf life of the fermented milk product from 5 to 17 days while maintaining a high content of L. bulgaricus (6.34 × 106 CFU/g).

Modifying Naturally Occurring, Nonmammalian-Sourced Biopolymers for Biomedical Applications

Natural biopolymers have a rich history, with many uses across the fields of healthcare and medicine, including formulations for wound dressings, surgical implants, tissue culture substrates, and drug delivery vehicles. Yet, synthetic-based materials have been more successful in translation due to precise control and regulation achievable during manufacturing. However, there is a renewed interest in natural biopolymers, which offer a diverse landscape of architecture, sustainable sourcing, functional groups, and properties that synthetic counterparts cannot fully replicate as processing and sourcing of these materials has improved. Proteins and polysaccharides derived from various sources (crustaceans, plants, insects, etc.) are highlighted in this review. We discuss the common types of polysaccharide and protein biopolymers used in healthcare and medicine, highlighting methods and strategies to alter structures and intra- and interchain interactions to engineer specific functions, products, or materials. We focus on biopolymers obtained from natural, nonmammalian sources, including silk fibroins, alginates, chitosans, chitins, mucins, keratins, and resilins, while discussing strategies to improve upon their innate properties and sourcing standardization to expand their clinical uses and relevance. Emphasis will be placed on methods that preserve the structural integrity and native biological functions of the biopolymers and their makers. We will conclude by discussing the untapped potential of new technologies to manipulate native biopolymers while controlling their secondary and tertiary structures, offering a perspective on advancing biopolymer utility in novel applications within biomedical engineering, advanced manufacturing, and tissue engineering.

All-in-one hydrogel patches with sprayed bFGF-loaded GelMA microspheres for infected wound healing studies

The current wound healing process faces numerous challenges such as bacterial infection, inflammation and oxidative stress. However, wound dressings used to promote wound healing, are not well suited to meet the clinical needs. Hyaluronic acid (HA) not only has excellent water absorption and good biocompatibility but facilitates cell function and tissue regeneration. Dopamine, on the other hand, increases the overall viscosity of the hydrogel and possesses antioxidant property. Furthermore, chitosan exhibits outstanding performance in antimicrobial, anti-inflammatory and antioxidant activities. Basic fibroblast growth factor (bFGF) is conducive to cell proliferation and migration, vascular regeneration and wound healing. Hence, we designed an all-in-one hydrogel patch containing dopamine and chitosan framed by hyaluronic acid (HDC) with sprayed gelatin methacryloyl (GelMA) microspheres loaded with bFGF (HDC-bFGF). The hydrogel patch exhibits excellent adhesive, anti-inflammatory, antioxidant and antibacterial properties. In vitro experiments, the HDC-bFGF hydrogel patch not only showed significant inhibitory effect on RAW cell inflammation and Staphylococcus aureus (S. aureus) growth but also effectively scavenged free radicals, in addition to promoting the migration of 3 T3 cells. In the mice acute infected wound model, the HDC-bFGF hydrogel patch adhered to the wound surface greatly accelerated the healing process via its anti-inflammatory and antioxidant activities, bacterial inhibition and pro-vascularization effects. Therefore, the multifunctional HDC-bFGF hydrogel patch holds great promise for clinical application.

Recent Applications of Chitosan and Its Derivatives in Antibacterial, Anticancer, Wound Healing, and Tissue Engineering Fields

Chitosan, a versatile biopolymer derived from chitin, has garnered significant attention in various biomedical applications due to its unique properties, such as biocompatibility, biodegradability, and mucoadhesiveness. This review provides an overview of the diverse applications of chitosan and its derivatives in the antibacterial, anticancer, wound healing, and tissue engineering fields. In antibacterial applications, chitosan exhibits potent antimicrobial properties by disrupting microbial membranes and DNA, making it a promising natural preservative and agent against bacterial infections. Its role in cancer therapy involves the development of chitosan-based nanocarriers for targeted drug delivery, enhancing therapeutic efficacy while minimising side effects. Chitosan also plays a crucial role in wound healing by promoting cell proliferation, angiogenesis, and regulating inflammatory responses. Additionally, chitosan serves as a multifunctional scaffold in tissue engineering, facilitating the regeneration of diverse tissues such as cartilage, bone, and neural tissue by promoting cell adhesion and proliferation. The extensive range of applications for chitosan in pharmaceutical and biomedical sciences is not only highlighted by the comprehensive scope of this review, but it also establishes it as a fundamental component for forthcoming research in biomedicine.

Chitosan nanocomposites as a nano-bio tool in phytopathogen control

Chitosan, an economically viable and versatile biopolymer, exhibits a wide array of advantageous physicochemical and biological properties. Chitosan nanocomposites, formed by the amalgamation of chitosan or chitosan nanoparticles with other nanoparticles or materials, have garnered extensive attention across agricultural, pharmaceutical, and biomedical domains. These nanocomposites have been rigorously investigated due to their diverse applications, notably in combatting plant pathogens. Their remarkable efficacy against phytopathogens has positioned them as a promising alternative to conventional chemical-based methods in phytopathogen control, thus exploring interest in sustainable agricultural practices with reduced reliance on chemical interventions. This review aims to highlight the anti-phytopathogenic activity of chitosan nanocomposites, emphasizing their potential in mitigating plant diseases. Additionally, it explores various synthesis methods for chitosan nanoparticles to enhance readers' understanding. Furthermore, the analysis delves into elucidating the intricate mechanisms governing the antimicrobial effectiveness of these composites against bacterial and fungal phytopathogens.

Bactericidal Chitosan Derivatives and Their Superabsorbent Blends with ĸ-Carrageenan

The aim of this work is research dedicated to the search for new bactericidal systems for use in cosmetic formulations, dermocosmetics, or the production of wound dressings. Over the last two decades, chitosan, due to its special biological activity, has become a highly indispensable biopolymer with very wide application possibilities. Reports in the literature on the antibacterial effects of chitosan are very diverse, but our research has shown that they can be successfully improved through chemical modification. Therefore, in this study, results on the synthesis of new chitosan-based Schiff bases, dCsSB-SFD and dCsSB-PCA, are obtained using two aldehydes: sodium 4-formylbenzene-1,3-disulfonate (SFD) and 2-pyridine carboxaldehyde (PCA), respectively. Chitosan derivatives synthesized in this way demonstrate stronger antimicrobial activity. Carrying out the procedure of grafting chitosan with a caproyl chain allowed obtaining compatible blends of chitosan derivatives with κ-carrageenan, which are stable hydrogels with a high swelling coefficient. Furthermore, the covalently bounded poly(ε-caprolactone) (PCL) chain improved the solubility of obtained polymers in organic solvents. In this respect, the Schiff base-containing polymers obtained in this study, with special hydrogel and antimicrobial properties, are very promising materials for potential use as a controlled-release formulation of both hydrophilic and hydrophobic drugs in cosmetic products for skin health.

Comparing the antibacterial activity of chitin nanocrystals with chitin: exploring the feasibility of chitin nanocrystals as novel pesticide nanocarriers in agriculture

BACKGROUND

In recent years, nanomaterials-based pesticide carriers have garnered significant attention and sparked extensive research. However, most studies have primarily focused on investigating the impact of physical properties of nanomaterials, such as size and modifiable sites, on drug delivery efficiency of nano-pesticides. The limited exploration of biologically active nanomaterials poses a significant obstacle to the advancement and widespread adoption of nano-pesticides. In this study, we prepared chitin nanocrystals (ChNC) based on acid hydrolysis and systematically investigated the differences between nano- and normal chitin against plant bacteria (Pseudomonas syringae pv. tabaci). The primary objective was to seek out nanocarriers with heightened biological activity for the synthesis of nano-pesticides.

RESULTS

Zeta potential analysis, Fourier Transform infrared spectrometry (FTIR), X-Ray diffraction (XRD), Atomic force microscopy (AFM) and Transmission electron microscopy (TEM) identified the successful synthesis of ChNC. ChNC showcased remarkable bactericidal activity at comparable concentrations, surpassing that of chitin, particularly in its ability to inhibit bacterial biofilm formation. Furthermore, ChNC displayed heightened effectiveness in disrupting bacterial cell membranes, resulting in the leakage of bacterial cell contents, structural DNA damage, and impairment of DNA replication. Lastly, potting experiments revealed that ChNC is notably more effective in inhibiting the spread and propagation of bacteria on plant leaves.

CONCLUSION

ChNC exhibited higher antibacterial activity compared to chitin, enabling efficient control of plant bacterial diseases through enhanced interaction with bacteria. These findings offer compelling evidence of ChNC's superior bacterial inhibition capabilities, underscoring its potential as a promising nanocarrier for nano-pesticide research. © 2023 Society of Chemical Industry.

Development of Biological Coating from Novel Halophilic Exopolysaccharide Exerting Shelf-Life-Prolonging and Biocontrol Actions for Post-Harvest Applications

The literature presents the preserving effect of biological coatings developed from various microbial sources. However, the presented work exhibits its uniqueness in the utilization of halophilic exopolysaccharides as food coating material. Moreover, such extremophilic exopolysaccharides are more stable and economical production is possible. Consequently, the aim of the presented research was to develop a coating material from marine exopolysaccharide (EPS). The significant EPS producers having antagonistic attributes against selected phytopathogens were screened from different marine water and soil samples. TSIS01 isolate revealed the maximum antagonism well and EPS production was selected further and characterized as Bacillus tequilensis MS01 by 16S rRNA analysis. EPS production was optimized and deproteinized EPS was assessed for biophysical properties. High performance thin layer chromatography (HPTLC) analysis revealed that EPS was a heteropolymer of glucose, galactose, mannose, and glucuronic acid. Fourier transform infrared spectroscopy, X-ray diffraction, and UV-visible spectra validated the presence of determined sugars. It showed high stability at a wide range of temperatures, pH and incubation time, ≈1.63 × 106 Da molecular weight, intermediate solubility index (48.2 ± 3.12%), low water holding capacity (12.4 ± 1.93%), and pseudoplastic rheologic shear-thinning comparable to xanthan gum. It revealed antimicrobial potential against human pathogens and antioxidants as well as anti-inflammatory potential. The biocontrol assay of EPS against phytopathogens revealed the highest activity against Alternaria solani. The EPS-coated and control tomato fruits were treated with A. solani suspension to check the % disease incidence, which revealed a significant (p < 0.001) decline compared to uncoated controls. Moreover, it revealed shelf-life prolonging action on tomatoes comparable to xanthan gum and higher than chitosan. Consequently, the presented marine EPS was elucidated as a potent coating material to mitigate post-harvest losses.

Preparation of bioactive film based on chitosan and essential oils mixture for enhanced preservation of food products

Recently, the concept of biodegradable and bioactive packaging and surface coating has become a trend. In this work, the bioactive films of chitosan were elaborated following the casting method. Contrary to the films containing the Cinnamomum zeylanicum Blume, Thymus satureioides Cosson, and Syzygium aromaticum essential oils (EOs) mixtures, the control film was thin, colorless, and showed high moisture content, swelling degree, and elongation at break. Concerning the physicochemical parameters, the incorporation of the EOs mixtures minimized the hydrophobicity of the material (θw < 65°) and modified randomly its surface free energy components (γ-; γ+; γLW). The theoretical prediction of Aspergillus sp. and Rhizopus sp. adherence to the chitosan-based films was relatively correlated to the experimental results (r = -0.601). The latter showed that 6.80 % and 19.02 % of the control film surface was covered by Aspergillus sp. and Rhizopus sp. spores, respectively. In contrast, no fungal adherence was noticed in the case of the film incorporating the triple EOs mixture. These promising results revealed that chitosan film containing C. zeylanicum, T. satureioides, and S. aromaticum EOs mixtures could be utilized as a surface coating or bioactive packaging in the food industry.

Valorization of shrimp processing waste-derived chitosan into anti-inflammatory chitosan-oligosaccharides (CHOS)

Bioconversion of chitosan into soluble anti-inflammatory chitosan oligosaccharides (CHOS) using a Bacillus chitosanase, BsCsn46A, was investigated, including food-grade approaches. After 48 h of enzymatic reaction, most of the final products were dimers and trimers. None of the CHOS products showed toxicity to human fibroblasts. Analysis of CHOS bioactivity against LPS-induced inflammation of human macrophages indicated that CHOS generated from different bioconversion processes have anti-inflammatory activity, the magnitude of which depends on the type of substrate and production process. Both lactic acid and HCl can be used to dissolve chitosan; however, the product generated from lactic acid solution was highly hygroscopic after lyophilization, hence not suitable for long-term storage. Downstream processes, i.e., centrifugation and filtration, affect its anti-inflammatory activity. Analysis of standard CHOS with known structure showed that an acetyl group at the reducing end and the degree of polymerization (DP) are critical for biological activity. Importantly, when applied at levels above the optimal concentrations, certain standard CHOS and CHOS mixtures could induce inflammation. These results support the potential of CHOS as anti-inflammatory agents but reveal batch-to-batch variation and possible side effects, indicating that careful quality assurance of CHOS preparations is essential.

Proximate Content Monitoring of Black Soldier Fly Larval (Hermetia illucens) Dry Matter for Feed Material using Short-Wave Infrared Hyperspectral Imaging

Edible insects are gaining popularity as a potential future food source because of their high protein content and efficient use of space. Black soldier fly larvae (BSFL) are noteworthy because they can be used as feed for various animals including reptiles, dogs, fish, chickens, and pigs. However, if the edible insect industry is to advance, we should use automation to reduce labor and increase production. Consequently, there is a growing demand for sensing technologies that can automate the evaluation of insect quality. This study used short-wave infrared (SWIR) hyperspectral imaging to predict the proximate composition of dried BSFL, including moisture, crude protein, crude fat, crude fiber, and crude ash content. The larvae were dried at various temperatures and times, and images were captured using an SWIR camera. A partial least-squares regression (PLSR) model was developed to predict the proximate content. The SWIR-based hyperspectral camera accurately predicted the proximate composition of BSFL from the best preprocessing model; moisture, crude protein, crude fat, crude fiber, and crude ash content were predicted with high accuracy, with R2 values of 0.89 or more, and root mean square error of prediction values were within 2%. Among preprocessing methods, mean normalization and max normalization methods were effective in proximate prediction models. Therefore, SWIR-based hyperspectral cameras can be used to create automated quality management systems for BSFL.

Chemical extraction, characterization, and inspection of the antimicrobial and antibiofilm activities of shrimp chitosan against foodborne fungi and bacteria

Nowadays, the exploitation of biopolymers in the industrial sector has become a trend. Chitosan is considered one of the most investigated biopolymers due to its abundance and antibacterial, antifungal, and antibiofilm activities. In this work, chitosan was chemically extracted from shrimp shells. Solutions of HCl 1 M, NaOH 4 M, and NaOH 15 M were used for the demineralization, deproteinization, and deacetylation process, respectively. The utilized methods of characterization (FTIR, 1 H NMR, 13 C NMR, and SEC-MALS) revealed that the obtained chitosan has a moderate degree of deacetylation and low molecular weight (DDA = 74% and Mw = 72.14 kDa). The microdilution method and inoculation of solid medium were carried out to assess the antibiofilm action of chitosan against Staphylococcus aureus, Pseudomonas aeruginosa, Enterococcus hirae, Escherichia coli, Rhizopus sp., and Aspergillus sp. which are known as foodborne microorganisms. Results showed that the produced chitosan at 1 g/L inhibits between 63.44 and 99.75% of the microbial biofilm depending on the tested strains. These promising results confirm the potential deployment of the obtained chitosan in the food industry as a replacement for synthetic antimicrobial agents.

2-Pyridinecarboxaldehyde-Modified Chitosan-Silver Complexes: Optimized Preparation, Characterization, and Antibacterial Activity

The widespread prevalence of infectious bacteria is one of the greatest threats to public health, and consequently, there is an urgent need for efficient and broad-spectrum antibacterial materials that are antibiotic-free. In this study, 2-pyridinecarboxaldehyde (PCA) was grafted onto chitosan (CS) and the modified CS coordinated with silver ions to prepare PCA-CS-Ag complexes with antibacterial activity. To obtain complexes with a high silver content, the preparation process was optimized using single-factor experiments and response surface methodology. Under the optimal preparation conditions (an additional amount of silver nitrate (58 mg), a solution pH of 3.9, and a reaction temperature of 69 °C), the silver content of the PCA-CS-Ag complex reached 13.27 mg/g. The structure of the PCA-CS-Ag complex was subsequently verified using ultraviolet-visible spectroscopy, Fourier-transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and thermogravimetric analysis. Furthermore, three possible complexation modes of the PCA-CS-Ag complex were proposed using molecular mechanics calculations. The results of the antibacterial assay in vitro showed that the PCA-CS-Ag complex exhibited strong antibacterial activity against both Gram-positive and Gram-negative bacteria, exerting the synergistic antibacterial effect of modified chitosan and silver ions. Therefore, the PCA-CS-Ag complex is expected to be developed as an effective antibacterial material with promising applications in food films, packaging, medical dressings, and other fields.

Quantification of Bioactive Metabolites Derived from Cell-Free Supernatant of Pediococcus acidilactici and Screening their Protective Properties in Frankfurters

The specific aims of the current study were to determine and quantify the bioactive compounds derived from the cell-free supernatant (CFS) of Pediococcus acidilactici and screen their protective effect in frankfurters by applying an edible coating. This was achieved by immersing the peeled frankfurters in the CFS (CFS: 50% and 100%) alone or in combination with chitosan (CH: 0.5% and 1%) solutions for 3 min. Untreated frankfurter samples (control) exceeded the maximum acceptable total viable count limit (7.0 log10) on the 14th day, whereas samples treated with 100% CFS + 1% chitosan reached the limit on day 28 during refrigerated storage (P < 0.05). This treatment provided a 14-day extension to the shelf life of frankfurters without causing any significant changes in color and sensory attributes (P > 0.05). Additionally, this treatment inhibited oxidation in the frankfurters, leading to no significant changes in TBA and TVB-N within this group during storage (P > 0.05). This protective effect was mainly attributed to the wide variety of bioactive compounds identified in the CFS, including a total of 5 organic acids, 20 free amino acids, 11 free fatty acids, 77 volatiles, and 10 polyphenols. Due to these bioactive compounds, CFS exhibited a strong radical scavenging capacity (DPPH: 435.08 TEAC/L, ABTS: 75.01 ± 0.14 mg TEAC/L; FRAP: 1.30 ± 0.03 mM FE/L) and antimicrobial activity against microorganisms primarily responsible for the spoilage of frankfurters. In conclusion, the results indicate that the CFS contains high levels of bioactive metabolites, and an edible chitosan coating impregnated with CFS can be utilized to extend the shelf life of frankfurters through its antimicrobial effects and oxidation stabilization.

Biocomposite Coatings Doped with Magnesium and Zinc Ions in Chitosan Matrix for Antimicrobial Applications

Hydroxyapatite doped with magnesium and zinc in chitosan matrix biocomposites have great potential for applications in space technology, aerospace, as well as in the biomedical field, as a result of coatings with multifunctional properties that meet the increased requirements for wide applications. In this study, coatings on titanium substrates were developed using hydroxyapatite doped with magnesium and zinc ions in a chitosan matrix (MgZnHAp_Ch). Valuable information concerning the surface morphology and chemical composition of MgZnHAp_Ch composite layers were obtained from studies that performed scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), metallographic microscopy, and atomic force microscopy (AFM). The wettability of the novel coatings, based on magnesium and zinc-doped biocomposites in a chitosan matrix on a titanium substrate, was evaluated by performing water contact angle studies. Furthermore, the swelling properties, together with the coating's adherence to the titanium substrate, were also analyzed. The AFM results emphasized that the composite layers exhibited the surface topography of a uniform layer, and that there were no evident cracks and fissures present on the investigated surface. Moreover, antifungal studies concerning the MgZnHAp_Ch coatings were also carried out. The data obtained from quantitative antifungal assays highlight the strong inhibitory effects of MgZnHAp_Ch against C. albicans. Additionally, our results underline that after 72 h of exposure, the MgZnHAp_Ch coatings display fungicidal features. Thus, the obtained results suggest that the MgZnHAp_Ch coatings possess the requisite properties that make them suitable for use in the development of new coatings with enhanced antifungal features.

Carrageenan/Chitin Nanowhiskers Cryogels for Vaginal Delivery of Metronidazole

The development of polymeric carriers based on partially deacetylated chitin nanowhiskers (CNWs) and anionic sulfated polysaccharides is an attractive strategy for improved vaginal delivery with modified drug release profiles. This study focuses on the development of metronidazole (MET)-containing cryogels based on carrageenan (CRG) and CNWs. The desired cryogels were obtained by electrostatic interactions between the amino groups of CNWs and the sulfate groups of CRG and by the formation of additional hydrogen bonds, as well as by entanglement of carrageenan macrochains. It was shown that the introduction of 5% CNWs significantly increased the strength of the initial hydrogel and ensured the formation of a homogeneous cryogel structure, resulting in sustained MET release within 24 h. At the same time, when the CNW content was increased to 10%, the system collapsed with the formation of discrete cryogels, demonstrating MET release within 12 h. The mechanism of prolonged drug release was mediated by polymer swelling and chain relaxation in the polymer matrix and correlated well with the Korsmeyer-Peppas and Peppas-Sahlin models. In vitro tests showed that the developed cryogels had a prolonged (24 h) antiprotozoal effect against Trichomonas, including MET-resistant strains. Thus, the new cryogels with MET may be promising dosage forms for the treatment of vaginal infections.

Advanced polymer hydrogels that promote diabetic ulcer healing: mechanisms, classifications, and medical applications

Diabetic ulcers (DUs) are one of the most serious complications of diabetes mellitus. The application of a functional dressing is a crucial step in DU treatment and is associated with the patient's recovery and prognosis. However, traditional dressings with a simple structure and a single function cannot meet clinical requirements. Therefore, researchers have turned their attention to advanced polymer dressings and hydrogels to solve the therapeutic bottleneck of DU treatment. Hydrogels are a class of gels with a three-dimensional network structure that have good moisturizing properties and permeability and promote autolytic debridement and material exchange. Moreover, hydrogels mimic the natural environment of the extracellular matrix, providing suitable surroundings for cell proliferation. Thus, hydrogels with different mechanical strengths and biological properties have been extensively explored as DU dressing platforms. In this review, we define different types of hydrogels and elaborate the mechanisms by which they repair DUs. Moreover, we summarize the pathological process of DUs and review various additives used for their treatment. Finally, we examine the limitations and obstacles that exist in the development of the clinically relevant applications of these appealing technologies. This review defines different types of hydrogels and carefully elaborate the mechanisms by which they repair diabetic ulcers (DUs), summarizes the pathological process of DUs, and reviews various bioactivators used for their treatment.

Immunomodulatory Effects Mediated by Nano Amorphous Calcium Phosphate/Chitosan Oligosaccharide Lactate Coatings Decorated with Selenium on Titanium Implants

The aim of this work is in situ anodization/anaphoretic deposition of a nano amorphous calcium phosphate (ACP)/chitosan oligosaccharide lactate (ChOL) multifunctional hybrid coating decorated with selenium (Se) on a titanium substrate and in vivo investigation of its immunomodulatory and anti-inflammatory effect. Investigating phenomena at the implant-tissue interface of interest for controlled inflammation and immunomodulation was also the aim of the research. In our earlier research, we designed coatings based on ACP and ChOL on titanium with anticorrosive, antibacterial and biocompatible properties, while in the presented results we show that selenium addition makes this coating an immunomodulator. The immunomodulatory effect of the novel hybrid coating is characterized by the examination of the functional aspects in the tissue around the implant (in vivo): proinflammatory cytokines' gene expression, M1 (iNOS) and M2 (Arg1) macrophages, fibrous capsule formation (TGF-β) and vascularization (VEGF). The EDS, FTIR and XRD analyses prove the formation of a ACP/ChOL/Se multifunctional hybrid coating on Ti and the presence of Se. A higher M2/M1 macrophage ratio in the ACP/ChOL/Se-coated implants compared to pure titanium implants (a higher level of Arg1 expression) is noted at all time points examined (after 7, 14 and 28 days). Lower inflammation measured by gene expression of proinflammatory cytokines IL-1β and TNF, lower expression of TGF-β in the surrounding tissue and higher IL-6 expression (solely at day 7 post-implantation) is noted in presence of the ACP/ChOL/Se-coated implants.

Studies of the Tarragon Essential Oil Effects on the Characteristics of Doped Hydroxyapatite/Chitosan Biocomposites

Due to the emergence of antibiotic-resistant pathogens, the need to find new, efficient antimicrobial agents is rapidly increasing. Therefore, in this study, we report the development of new biocomposites based on zinc-doped hydroxyapatite/chitosan enriched with essential oil of Artemisia dracunculus L. with good antimicrobial activity. Techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR) were used in order to evaluate their physico-chemical properties. Our studies revealed that biocomposite materials with nanometric dimension and homogeneous composition could be obtained through an economic and cost-effective synthesis method. The biological assays demonstrated that ZnHA (zinc-doped hydroxyapatite), ZnHACh (zinc-doped hydroxyapatite/chitosan) and ZnHAChT (zinc-doped hydroxyapatite/chitosan enriched with essential oil of Artemisia dracunculus L.) did not exhibit a toxic effect on the cell viability and proliferation of the primary osteoblast culture (hFOB 1.19). Moreover, the cytotoxic assay also highlighted that the cell morphology of the hFOB 1.19 was not altered in the presence of ZnHA, ZnHACh or ZnHAChT. Furthermore, the in vitro antimicrobial studies emphasized that the samples exhibited strong antimicrobial properties against Escherichia coli ATCC 25922, Staphylococcus aureus ATCC 25923 and Candida albicans ATCC 10231 microbial strains. These results are encouraging for the following development of new composite materials with enhanced biological properties that could promote the osteogenic process of bone healing and also exhibit good antimicrobial properties.

Activity of chitin/chitosan/chitosan oligosaccharide against plant pathogenic nematodes and potential modes of application in agriculture: A review

Chemical nematicide is the most common method of controlling plant-parasitic nematodes (PPN). Given the negative impact of chemical nematicides on the environment and ecosystem, it is necessary to seek their alternatives and novel modes of application. Chitin oligo/polysaccharide (COPS), including chitosan and chitosan oligosaccharide, has unique biological properties. By producing ammonia, encouraging the growth of antagonistic bacteria, and enhancing crop tolerance, COPSs help suppress PPN growth during soil remediation. COPS is also an effective sustained-release carrier that can be used to overcome the shortcomings of nematicidal substances. This review summarizes the advancements of COPS research in nematode control from three perspectives of action mechanism as well as in slow-release carrier-loaded nematicides. Further, it discusses potential agricultural applications for nematode disease management.

Elaboration and general evaluation of chitosan-based films containing terpene alcohols-rich essential oils

Recently, the scientific community is interested in the synthesis of biodegradable and bioactive packaging to replace oil-based ones. Therefore, the present study aims to elaborate an active and biodegradable material using chitosan (CS-film) combined with pelargonium, tea tree, marjoram, and thyme essential oils (EOs), and then evaluate their different properties and biological activities. The obtained data showed an augmentation in CS-film thickness and opacity following the addition of EOs ranging from 17 ± 3 to 42 ± 2 μm and from 1.53 ± 0.04 to 2.67 ± 0.09, respectively. Furthermore, a significant decrease in the water vapor transmission rate and moisture content parameters was recorded as regards the treated CS-films. On the other hand, the treatment with EOs engenders random modifications in the physicochemical and mechanical characteristics of the material. Concerning the biological activities, the treated CS-films scavenged around 60% of DPPH radical while the control CS-film exhibited a negligible antioxidant activity. Finally, the CS-films containing pelargonium and thyme EOs exhibited the strongest antibiofilm-forming activity against Escherichia coli, Enterococcus hirae, Staphylococcus aureus, and Pseudomonas aeruginosa with values of inhibition greater than 70%. These encouraging results verify the effectiveness of CS-films containing EOs such as pelargonium and thyme EOs as biodegradable and bioactive packaging.

Facile preparation of a novel iminodisuccinate modified chitin and its excellent properties as a silver bioadsorbent and antibacterial agent

A novel iminodisuccinate modified chitin (ICH) was prepared using crab shells via a one-step facile procedure. The ICH with grafting degree of 1.46 and deacetylation degree of 47.68 % possessed maximum adsorption capacity of 2572.41 mg/g for silver ions (Ag(I)).The ICH also exhibited good selectivity and reusability. The adsorption followed better with the Freundlich isotherm model, while fitted well with both the Pseudo-first-order and Pseudo-second-order kinetics models. The characteristical results showed that the excellent Ag(I) adsorption capability of ICH should be attributed to both looser porous microstructure as well as additional functional groups-grafting molecular. Moreover, the Ag-loaded ICH (ICH-Ag) showed remarkable antibacterial properties against six typical pathogenic bacteria strains (Escherichia coli, Pseudomonas aeruginosa, Enterobacter aerogenes, Salmonella typhimurium, Staphylococcus aureus, and Listeria monocytogenes), with the corresponding 90 % minimal inhibitory concentrations ranged 0.426-0.685 mg/mL. Further study on the silver release, microcell morphology, and metagenomic analysis suggested that many Ag nanoparticles were formed after the Ag(I) adsorption, and the antibacterial mechanisms of the ICH-Ag involved both cell membranes destruction and intracellular metabolism disturbing. This research presented a coupling solution of crab shell wastes treatment with chitin-based bioadsorbents preparation, metal removal and recovery, as well as antibacterial agent production.

Synthesis and antibacterial analysis of C-6 amino-functionalised chitosan derivatives

Synthesis of 6-O-(3-alkylamino-2-hydroxypropyl) derivatives of chitosan was achieved using a four-step strategy of N-protection, O-epoxide addition, epoxide ring opening using an amine and N-deprotection. Benzaldehyde and phthalic anhydride were used for the N-protection step, producing N-benzylidene and N-phthaloyl protected derivatives, respectively, resulting in two corresponding final 6-O-(3-alkylamino-2-hydroxypropyl) derivative series, BD1-BD6 and PD1-PD14. All the compounds were characterized using FTIR, XPS and PXRD studies and tested for antibacterial efficacy. The phthalimide protection strategy was found to be easier to apply and effective in terms of the synthetic process and improvement in antibacterial activity. Amongst the newly synthesized compounds, PD13 (6-O-(3-(2-(N,N-dimethylamino)ethylamino)-2-hydroxypropyl)chitosan) was the most active with eight times greater activity compared to the unmodified chitosan and, PD7 6-O-(3-(3-(N-(3-aminopropyl)propane-1,3-diamino)propylamino)-2-hydroxypropyl)chitosan) having a four-fold activity than chitosan, was found to be the second most potent derivative. This work has produced new chitosan derivatives those are more potent than chitosan itself and show promise in antimicrobial applications.

Multifaceted production strategies and applications of glucosamine: a comprehensive review

Glucosamine (GlcN) and its derivatives are in high demand and used in various applications such as food, a precursor for the biochemical synthesis of fuels and chemicals, drug delivery, cosmetics, and supplements. The vast number of applications attributed to GlcN has raised its demand, and there is a growing emphasis on developing production methods that are sustainable and economical. Several: physical, chemical, enzymatic, microbial fermentation, recombinant processing methods, and their combinations have been reported to produce GlcN from chitin and chitosan available from different sources, such as animals, plants, and fungi. In addition, genetic manipulation of certain organisms has significantly improved the quality and yield of GlcN compared to conventional processing methods. This review will summarize the chitin and chitosan-degrading enzymes found in various organisms and the expression systems that are widely used to produce GlcN. Furthermore, new developments and methods, including genetic and metabolic engineering of Escherichia coli and Bacillus subtilis to produce high titers of GlcN and GlcNAc will be reviewed. Moreover, other sources of glucosamine production viz. starch and inorganic ammonia will also be discussed. Finally, the conversion of GlcN to fuels and chemicals using catalytic and biochemical conversion will be discussed.

A Mixture of Full-Fat and Defatted Hermetia illucens Larvae and Poultry By-Products as Sustainable Protein Sources Improved Fillet Quality Traits in Farmed Barramundi, Lates calcarifer

The physicochemical quality and shelf-life of fillets from barramundi, which were fed for 56 days on a mixture of poultry by-product meal (PBM), full-fat Hermetia illucens (FHI), and defatted HI (DHI), were investigated and compared to a fishmeal (FM) control diet. The proximate and total amino acids compositions of the fillets were unaffected by the test diets, while the mixture of PBM and HI larvae improved the sensory quality. An eight-day shelf-life study showed that PBM-HI-based diets improved the texture profile based upon the chewiness, cohesiveness, gumminess, and hardness, regardless of the storage time. The improved texture was aligned with comparatively less degradation of the microstructure of the muscle tissue in the same diets. An improvement in the quality index (QI) value, an increase in pH, and a decrease in lipid oxidation were also found in the fillets of barramundi fed test diets compared with the control diet during the storage time. The test diets positively influenced flesh lightness and redness, while the color profiles were negatively influenced by the storage time. Overall, the maintenance of compositional attributes; the enhancement of fillet sensory attributes, texture, and brightness; and the improved raw fillet shelf-life support the inclusion of PBM-HI-based diets in aquafeed.

Evaluation of antimicrobial activity of thiolated methylated N-(4-N, N-dimethylaminobenzyl) chitosan as a new derivative of chitosan

Despite chitosan as a natural cationic polysaccharide derived from chitin can be applied as an antimicrobial agent, many studies are performing for enhancing its capability to fight against pathogens. The aim of this study is investigating the antibacterial effect of thiolated methylated N-(4-N,N-dimethylaminobenzyl) chitosan (TTMAC) polymer and its nanoparticles as a novel derivation of chitosan. The polymer derivative was synthetized and characterized via¹ H NMR, FT-IR and Elman test. The nanoparticles with different N/P ratios were prepared by ionic gelation method and characterized by DLS (Dynamic Light Scattering) and TEM (Transmission Electron Microscopy). The cellular toxicity of polymer and nanoparticles at different concentrations were evaluated on human MCF-7 cell line. Antimicrobial assay was performed on Escherichia coli (ATCC 25922), Staphylococcus aureus (ATCC 25923) and Candida albicans (ATCC 10231)as Gram negative, Gram positive and yeast pathogens, respectively. The obtained results have shown the TTMAC polymer has a higher inhibition activity against microbial pathogens and also lower cellular toxicity in comparison with chitosan polymer. Furthermore, chitosan nanoparticles in comparison with TTMAC nanoparticles have lower size and highest zeta potential in different ratio and chitosan nanoparticles have more inhibitory effects against microbial pathogens. In conclusion, TTMAC derivative in polymeric form can be a promising tool against microbial pathogens.

Assessment of the antioxidant, antimicrobial and antibiofilm activities of essential oils for potential application of active chitosan films in food preservation

In the food industry, the development of microbial biofilms is a serious problem that leads to the contamination and deterioration of food products. To overcome that, our aim consists of searching for natural antimicrobial and non-toxic compounds (essential oils EOs), which might be used alone or adsorbed on natural biopolymer films (chitosan). In this work, the antioxidant activity of eight EOs was evaluated by DPPH radical-scavenging method while their antibacterial activity was determined by diffusion on agar and microdilution methods. Among all tested EOs, Eugenia caryophyllus, Cinnamomum zeylanicum Blume and Thymus satureioides Cosson showed high antioxidant activities at the concentration of 25.6 mg/mL, with respective values of (86.26%, 81.75%, and 76%), and strong antibacterial activity against Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, and Enterococcus hirae, with (MIC) values ≤ 4 µL/mL. At the concentration of 1 µL/mL, these EOs tested alone, showed values of antibiofilm-forming activity ranging from 79.43 to 99.33% and from 44.18 to 94.17%, when they are adsorbed onto chitosan film. These promising results confirm that these three EOs have a good potential for an eventual application in the food industry, as antimicrobial and antioxidant agents, or as active biodegradable food packaging, if combined with chitosan.

Various Coated Barrier Membranes for Better Guided Bone Regeneration: A Review

A good barrier membrane is one of the important factors for effective guided bone/tissue regeneration (GBR/GTR) in the case of periodontal bone defects. Several methods are being discussed to overcome and improve the shortcomings of commercially available membranes. One of the methods is to coat the membrane with bioactive materials. In this study, 41 studies related to coated membranes for GBR/GTR published in the last 5 years were reviewed. These studies reported coating the membrane with various bioactive materials through different techniques to improve osteogenesis, antimicrobial properties, and physical/mechanical properties. The reported studies have been classified and discussed based on the purpose of coating. The goal of the most actively studied research on coating or surface modification of membranes is to improve new bone formation. For this purpose, calcium phosphate, bioactive glass, polydopamine, osteoinduced drugs, chitosan, platelet-rich fibrin, enamel matrix derivatives, amelotin, hyaluronic acid, tantalum, and copper were used as membrane coating materials. The paradigm of barrier membranes is changing from only inert (or biocompatible) physical barriers to bioactive osteo-immunomodulatory for effective guided bone and tissue regeneration. However, there is a limitation that there exists only a few clinical studies on humans to date. Efforts are needed to implement the use of coated membranes from the laboratory bench to the dental chair unit. Further clinical studies are needed in the patients’ group for long-term follow-up to confirm the effect of various coating materials.

Chitosan and Chitooligosaccharide: The Promising Non-Plant-Derived Prebiotics with Multiple Biological Activities

Biodegradable chitin is the second-most abundant natural polysaccharide, widely existing in the exoskeletons of crabs, shrimps, insects, and the cell walls of fungi. Chitosan and chitooligosaccharide (COS, also named chitosan oligosaccharide) are the two most important deacetylated derivatives of chitin. Compared with chitin, chitosan and COS not only have more satisfactory physicochemical properties but also exhibit additional biological activities, which cause them to be widely applied in the fields of food, medicine, and agriculture. Additionally, due to their significant ability to improve gut microbiota, chitosan and COS are deemed prospective prebiotics. Here, we introduced the production, physicochemical properties, applications, and pharmacokinetic characteristics of chitosan and COS. Furthermore, we summarized the latest research on their antioxidant, anti-inflammatory, and antimicrobial activities. Research progress on the prebiotic functions of chitosan and COS is particularly reviewed. We creatively analyzed and discussed the mechanisms and correlations underlying these activities of chitosan and COS and their physicochemical properties. Our work enriched people's understanding of these non-plant-derived prebiotics. Based on this review, the future directions of research on chitosan and COS are explored. Collectively, optimizing the production technology of chitin derivatives and enriching understanding of their biological functions will shed more light on their capability to improve human health.

Recent advances of chitosan-based polymers in biomedical applications and environmental protection

Interest in polymer-based biomaterials such as chitosan and its modifications and also the methods of their application in various fields of science is uninterruptedly growing. Owing to unique physicochemical, biological, ecological, physiological properties, such as biocompatibility, biodegradability, stability in the natural environment, non-toxicity, high biological activity, economic affordability, chelating of metal ions, high sorption properties, chitosan is used in various biomedical and industrial processes. The reactivity of the amino and hydroxyl groups in the structure makes it more interesting for diverse applications in drug delivery, tissue engineering, wound healing, regenerative medicine, blood anticoagulation and bone, tendon or blood vessel engineering, dentistry, biotechnology, biosensing, cosmetics, water treatment, agriculture. Taking into account the current situation in the world with COVID-19 and other viruses, chitosan is also active in the form of a vaccine system, it can deliver antibodies to the nasal mucosa and load gene drugs that prevent or disrupt the replication of viral DNA/RNA, and deliver them to infected cells. The presented article is an overview of the nowaday state of the application of chitosan, based on literature of recent years, showing importance of fundamental and applied studies aimed to expand application of chitosan-based polymers in many fields of science.

Depuration of live oysters to reduce Vibrio parahaemolyticus and Vibrio vulnificus: A review of ecology and processing parameters

Consumption of raw oysters, whether wild-caught or aquacultured, may increase health risks for humans. Vibrio vulnificus and Vibrio parahaemolyticus are two potentially pathogenic bacteria that can be concentrated in oysters during filter feeding. As Vibrio abundance increases in coastal waters worldwide, ingesting raw oysters contaminated with V. vulnificus and V. parahaemolyticus can possibly result in human illness and death in susceptible individuals. Depuration is a postharvest processing method that maintains oyster viability while they filter clean salt water that either continuously flows through a holding tank or is recirculated and replenished periodically. This process can reduce endogenous bacteria, including coliforms, thus providing a safer, live oyster product for human consumption; however, depuration of Vibrios has presented challenges. When considering the difficulty of removing endogenous Vibrios in oysters, a more standardized framework of effective depuration parameters is needed. Understanding Vibrio ecology and its relation to certain depuration parameters could help optimize the process for the reduction of Vibrio. In the past, researchers have manipulated key depuration parameters like depuration processing time, water salinity, water temperature, and water flow rate and explored the use of processing additives to enhance disinfection in oysters. In summation, depuration processing from 4 to 6 days, low temperature, high salinity, and flowing water effectively reduced V. vulnificus and V. parahaemolyticus in live oysters. This review aims to emphasize trends among the results of these past works and provide suggestions for future oyster depuration studies.

Preparation and biological properties of ZnO/hydroxyapatite/chitosan-polyethylene oxide@gelatin biomimetic composite scaffolds for bone tissue engineering

To imitate the composition of natural bone and further improve the biological property of the materials, ZnO/hydroxyapatite/chitosan-polyethylene oxide@gelatin (ZnO/HAP/CS-PEO@GEL) composite scaffolds were developed. The core-shell structured chitosan-polyethylene oxide@gelatin (CS-PEO@GEL) nanofibers which could form the intramolecular hydrogen bond and achieve an Arg-Gly-Asp (RGD) polymer were first prepared by coaxial electrospinning to mimic the extracellular matrix. To further enhance biological activity, hydroxyapatite (HAP) was grown on the surface of the CS-PEO@GEL nanofibers using chemical deposition and ZnO particles were then evenly distributed on the surface of the above composite materials using RF magnetron sputtering. The SEM results showed that chemical deposition and magnetron sputtering did not destroy the three-dimensional architecture of materials, which was beneficial to cell growth. The cell compatibility and proliferation of MG-63 cells on ZnO/HAP/CS-PEO@GEL composite scaffolds were superior to those on CS-PEO@GEL and HAP/CS-PEO@GEL composite scaffolds. An appropriate amount of ZnO sputtering could promote the adhesion of cells on the composite nanofibers. The structure of bone tissue could be better simulated both in composition and in the microenvironment, which provided a suitable environment for cell growth and promoted the proliferation of MG-63 cells. The biomimetic ZnO/HAP/CS-PEO@GEL composite scaffolds were promising materials for bone tissue engineering.

Antiviral Polymers: A Review

Polymers, due to their high molecular weight, tunable architecture, functionality, and buffering effect for endosomal escape, possess unique properties as a carrier or prophylactic agent in preventing pandemic outbreak of new viruses. Polymers are used as a carrier to reduce the minimum required dose, bioavailability, and therapeutic effectiveness of antiviral agents. Polymers are also used as multifunctional nanomaterials to, directly or indirectly, inhibit viral infections. Multifunctional polymers can interact directly with envelope glycoproteins on the viral surface to block fusion and entry of the virus in the host cell. Polymers can indirectly mobilize the immune system by activating macrophages and natural killer cells against the invading virus. This review covers natural and synthetic polymers that possess antiviral activity, their mechanism of action, and the effect of material properties like chemical composition, molecular weight, functional groups, and charge density on antiviral activity. Natural polymers like carrageenan, chitosan, fucoidan, and phosphorothioate oligonucleotides, and synthetic polymers like dendrimers and sialylated polymers are reviewed. This review discusses the steps in the viral replication cycle from binding to cell surface receptors to viral-cell fusion, replication, assembly, and release of the virus from the host cell that antiviral polymers interfere with to block viral infections.

Antimicrobial polysaccharides obtained from natural sources

With the increase in resistance to conventional antibiotics among bacterial pathogens, the search for new antimicrobials becomes more and more necessary. Although most studies focus on the discovery of antimicrobial peptides for the development of new antibiotics, several others in the literature have described polysaccharides with the same biological activity with the potential for use as therapeutic alternatives. Here we review the currently available literature on antimicrobial polysaccharides isolated from different sources to demonstrate that there are several possible unconventional carbohydrate polymers that could act as therapeutic alternatives in the battle against drug-resistant pathogens.

Effect of Squid Cartilage Chitosan Molecular Structure on the Properties of Its Monofilament as an Absorbable Surgical Suture

Suture is an important part of surgery, and wounds closing after surgery remains a challenge for postoperative care. Currently, silk, linen fiber, and cotton are available in the market as non-absorbable suture biomaterials. So, there is an urgent need to develop a novel suture with advantageous characteristics compared to the ones available on the market. In present study, a series of ultra-high molecular weight chitosan with different DD and M_V were prepared from squid cartilage by alkaline treatment and ultrasonic degradation. The corresponding chitosan monofilaments were prepared by a wet spinning process and were characterized as sutures. The effects of the DD and M_V of chitosan on the properties of its monofilament were studied, including surface morphology, mechanical property, swelling ratio, ash content, in vitro enzymatic degradation, and in vitro cytotoxicity. According to the results, AS-85 was chosen to be the best suitable as an absorbable surgical suture, which was spun from squid cartilage chitosan with DD~85% and M_V~1.2 × 10⁶. The outcome of the present study might derive tremendous possibilities for the utilization of squid cartilage β-chitin for biomedical applications.

Symmetry between Structure–Antibacterial Effect of Polymers Functionalized with Phosphonium Salts

In actual context, when the terms of biomass and bioenergy are extensively used, it becomes clear that the comparative study of some biopolymers, such as cellulose and chitosan, can offer a large usage range, based on the scientific progress obtained in the biomaterials field. Starting from the structural similarity of these two polymers, we synthesized composite materials by grafting on their surface biocide substances (phosphonium salts). After testing the biocidal effect, we can conclude that the antibacterial effect depends on the ratio of support to phosphonium salt, influenced by the interaction between the cationic component of the biocides and by the anionic component of the bacterial cellular membrane. It was also observed that for the materials obtained by cellulose functionalization with tri-n-butyl-hexadecyl phosphonium bromide, the bacterial effect on E. coli strain was much better when chitosan was used as the support material.

Biocontrol Potential of Chitin and Chitosan Extracted from Black Soldier Fly Pupal Exuviae against Bacterial Wilt of Tomato

Globally, Ralstonia solanacearum (Smith) is ranked one of the most destructive bacterial pathogens inducing rapid and fatal wilting symptoms on tomatoes. Yield losses on tomatoes vary from 0 to 91% and most control measures are unaffordable to resource-poor farmers. This study investigated the antimicrobial activities of chitin and chitosan extracted from black soldier fly (BSF) pupal exuviae against R. solanacearum. Morphological, biochemical, and molecular techniques were used to isolate and characterize R. solanacearum for in vitro pathogenicity test using disc diffusion technique. Our results revealed that BSF chitosan significantly inhibited the growth of R. solanacearum when compared to treatments without chitosan. However, there was no significant difference in the antibacterial activities between BSF and commercial chitosan against R. solanacearum. Soil amended with BSF-chitin and chitosan demonstrated a reduction in bacterial wilt disease incidence by 30.31% and 34.95%, respectively. Whereas, disease severity was reduced by 22.57% and 23.66%, when inoculated tomato plants were subjected to soil amended with BSF chitin and chitosan, respectively. These findings have demonstrated that BSF pupal shells are an attractive renewable raw material for the recovery of valuable products (chitin and chitosan) with promising ability as a new type of eco-friendly control measure against bacterial wilt caused by R. solanacearum. Further studies should explore integrated pest management options that integrate multiple components including insect-based chitin and chitosan to manage bacterial wilt diseases, contributing significantly to increased tomato production worldwide.

Chitosan films and scaffolds for regenerative medicine applications: A review

Over the last years, chitosan has demonstrated unparalleled characteristics for regenerative medicine applications. Beside excellent antimicrobial and wound healing properties, this polysaccharide biopolymer offers favorable characteristics such as biocompatibility, biodegradability, and film and fiber-forming capabilities. Having plentiful active amine groups, chitosan can be also readily modified to provide auxiliary features for growing demands in regenerative medicine, which is constantly confronted with new problems, necessitating the creation of biocompatible, immunogenic and biodegradable film/scaffold composites. A new look at the chitosan composites structure/activity/application tradeoff is the primary focus of the current review, which can help researchers to detect the bottlenecks and overcome the shortcomings that arose from this intersection. In the current review, the most recent advances in chitosan films and scaffolds in terms of preparation techniques and modifying methods for improving their functional properties, in three major biomedical fields i.e., tissue engineering, wound healing, and drug delivery are surveyed and discussed.