Microwave-assisted extraction of essential oils from herbs

Comparative Study of Essential Oils from Tunisian Pinus Halepensis Mill. by Hydrodistillation and Microwave-Assisted Processes: Chemical Composition and Antioxidant and Cytotoxic Potential against Prostate and Cervical Cancer Cells

Pinus halepensis Mill. is a Mediterranean aromatic plant largely used, in addition to its nutritional value, in traditional medicine as antiseptic, antifungal, antituberculotic, and antirheumatic. Thus, the objective of this work was to appraise the antioxidant and cytotoxic activity of the essential oil (EO) of P. halepensis from Tunisia on cancer cell cultures, along with chemical composition evaluation by GC-MS. To attain the best yield and also highest quality in extraction of the EOs, conventional hydrodistillation (HD) and novel microwave-assisted extraction (MAE) methods have been performed and compared. The antioxidant activity was evaluated through the inhibition of 2,2-diphenyl-1-picrylhydrazyl (DPPH)• radicals. The cytotoxic activity in prostate cancer cells (LNCaP and PC3) and cervical cancer cells (HeLa) of EO was evaluated by the MTT assay and effect on the cell cycle by flow cytometry analysis. A total of 38 and 37 components were identified from HD (HD-EO)- and MAE (MAE-EO)-extracted EOs, respectively, which were dominated by hydrocarbon compounds (HD-EO = 86.65%; MAE-EO = 77.36%), especially monoterpenes (HD-EO = 32.11%; MAE-EO = 21.55%) and sesquiterpenes (HD-EO = 44.29%; MAE-EO = 61.32%). Both extracted EOs showed significant antioxidant activity, as shown by the inhibition of DPPH• radicals [IC50 (HD-EO) = 4102.30 ± 159.73 μg mL-1 and IC50 (MAE-EO) = 3430.13 ± 78.46 μg mL-1]. Also, the EOs exhibited substantial (p < 0.001) antiproliferative activities with G0-G1 arrest on PC3, LNCaP, and HeLa cells by yielding very low IC50 values more conspicuous in MAE-EO with respective IC50 values of 25.70 ± 6.58, 14.97 ± 3.21, and 14.55 ± 2.30 μg mL-1. This finding points out for the first time that the EO of P. halepensis Mill. from Tunisia can be an effective natural antitumor agent with more pronounced activity when extracted with the MAE method that, after further in vivo studies, can be harnessed as a putative phytopharmaceutical for prostate and cervical cancer treatment.

Conventional vs. Microwave-Assisted Hydrodistillation: Influence on the Chemistry of Sea Fennel Essential Oil and Its By-Products

The main objectives of this study were to investigate the effects of the applied essential oil (EO) isolation method, conventional hydro-distillation (HD), and microwave-assisted hydro-distillation (MHD) on the chemical profile of sea fennel (Crithmum maritimum L.) essential oil and to investigate the main constituents present in the liquid by-products of EOs isolation (hydrolate and residual wastewater). Headspace-solid phase microextraction (HS-SPME) was used to isolate hydrolate components, while gas chromatography coupled with mass spectrometry (GC-MS) was used to detect and analyse the chemical constituents of the essential oils and hydrolates. The phenolic composition of the wastewater extracts was analysed by high performance liquid chromatography (HPLC). The EO obtained by MHD had a higher yield of limonene and sabinene. The chemical composition of the hydrolates differed from the EO compositions. The content of terpinen-4-ol in the MHD hydrolate was higher, while several compounds were detected in relatively high proportions only in the HD hydrolate. MHD also resulted in a higher phenolic content of the wastewater, where an increase in the concentration of chlorogenic acid was also observed. It can be concluded that the isolation method had a great influence on the profile of sea fennel EOs, especially on their corresponding hydrolates and residual wastewater extracts. Due to their valuable chemical composition, these by-products can be a cost-effective source of bioactive compounds that have great potential for use in various industries.

Microwave-Assisted Hydrodistillation of Essential Oil from Plectranthus amboinicus: Evaluation of Its Antifungal Effect and Chemical Composition

Fusarium wilt, a vascular syndrome in a wide range of plants, is caused by the pathogen Fusarium Oxysporum. The objective of this investigation was to evaluate the antifungal effect of four essential oils (EOs) (Plectranthus amboinicus, Syzygium aromaticum, Lippia alba, and Rosmarinus officinalis), which were obtained by using microwave-assisted hydrodistillation (MAH), against F. oxysporum. The yield obtained from P. amboinicus with the use of MAH was 0.2%, which was higher than that of a conventional extraction; its extraction time was also shorter. For concentrations of 100 and 300 μL/L, P. amboinicus caused an inhibition rate of 27.2 and 55.7%, respectively, while S. aromaticum caused an inhibition rate of 23.1 and 87.3%, respectively. It was observed that increasing the concentration also increased the % inhibition rate. The extracts of L. alba and R. officinalis caused an inhibition rate of 14.5 and 14.7% at 500 µL/L, respectively, at 10 days of incubation, while at this concentration, P. amboinicus and S. aromaticum achieved 100%. The major chemical compounds of P. amboinicus were carvacrol (41.20%), o-cymene (11.61%), caryophyllene (11.45%), α-bergamotene (7.71%), and caryophyllene oxide (4.62%), and these monoterpene hydrocarbons were responsible for the biological activity. The essential oil of P. amboinicus in appropriate concentrations is a potent antifungal agent that could be used for the control of F. oxysporum.

Bioactive Properties of Extracts from Plectranthus barbatus (Coleus forskohlii) Roots Received Using Various Extraction Methods

The aim of this study was to verify various extraction methods: shaking water bath extraction (SWA), ultrasound-assisted extraction (UAE) and microwave assisted extraction (MAE), and their parameters to optimize the extraction yield as well as maximize the concentration of polyphenols in Plectranthus barbatus extracts. Extracts were obtained from dried roots of P. barbatus in various degrees of fragmentation and analyzed for content of polyphenols, antioxidant capacity and flavonoids. Additionally, phenolic compounds in extracts were analyzed using the UHPLC-DAD-ESI-MS/MS method. The conducted research showed that roots of P. barbatus are rich in polyphenolic compounds. A total of 15 phenolic compounds, belonging to the group of phenolic acids and their derivatives, were identified. The extraction yield was similar for all extraction methods and averaged 31%. Irrespective of the extraction method, the yield was the lowest in the case of using 80% ethanol as the solvent. The extracts obtained from the finer fraction were characterized by a higher antioxidant capacity as well as a higher concentration of polyphenolic compounds including flavonoids. UAE seems to be the most effective method for extraction of polyphenols from P. barbatus roots. Regardless of the extraction method, ethanol was a better extractant than distilled water. All ethanolic extracts were characterized by a high antioxidant capacity. The 80% ethanol solution was considered the best solvent for the extraction of flavonoids, while the 40% and 60% ethanol solutions were sufficient for the effective extraction of polyphenolic compounds in general.

Advances in extraction methods, chemical constituents, pharmacological activities, molecular targets and toxicology of volatile oil from Acorus calamus var. angustatus Besser

Acorus calamus var. angustatus Besser (ATT) is a traditional herb with a long medicinal history. The volatile oil of ATT (VOA) does possess many pharmacological activities. It can restore the vitality of the brain, nervous system and myocardial cells. It is used to treat various central system, cardiovascular and cerebrovascular diseases. It also showed antibacterial and antioxidant activity. Many studies have explored the benefits of VOA scientifically. This paper reviews the extraction methods, chemical components, pharmacological activities and toxicology of VOA. The molecular mechanism of VOA was elucidated. This paper will serve as a comprehensive resource for further carrying the VOA on improving its medicinal value and clinical use.

Extraction and purification of α-pinene; a comprehensive review

Extensive use of α-pinene in cosmetics, and medicine, especially for its antioxidant/antibacterial, and anti-cancer properties, and also as a flavoring agent, has made it a versatile product. α-Pinene (one of the two pinene isomers) is the most abundant terpene in nature. When extracting α-pinene from plants and, to a lesser extent, fruits, given that its purity is essential, purification methods should also be used as described in this study. Also, an attempt has been made to describe the extraction techniques of α-pinene, carried out by conventional and novel methods. Some disadvantages of conventional methods (such as hydrodistillation or solvent extraction) are being time consuming, low capacity per batch and being labor intensive and the requirement of trained operators. Most novel methods, such as supercritical fluid extraction and microwave-assisted extraction, can reduce the extraction time, cost, and energy compared to conventional methods, and, in fact, the extraction and preservation efficiency of α-pinene in these methods is higher than conventional methods. Although the above-mentioned extraction methods are effective, they still require rather long extraction times. In fact, advanced methods such as green and solvent-free ultrasonic-microwave-assisted extraction are much more efficient than microwave-assisted extraction and ultrasound-assisted extraction because the extraction efficiency and separation of α-pinene in these methods are higher; furthermore, no solvent consumption and maximum extraction efficiency are some crucial advantages of these techniques. However, the application of some novel methods, such as ultrasound-assisted extraction, in industry scale is still problematic because of their intricate design data.

Comparative Study of Useful Compounds Extracted from Lophanthus anisatus by Green Extraction

Essential oils were obtained from different parts of Agastache foeniculum (Lophanthus anisatus) plants by means of extraction: green extraction using hydro-distillation (HD) and bio-solvent distillation, BiAD, discontinuous distillation, and supercritical fluid extraction, in two stages: (1) with CO₂, and (2) with CO₂ and ethanol co-solvent. The extraction yields were determined. The yield values varied for different parts of the plant, as well as the method of extraction. Thus, they had the values of 0.62 ± 0.020 and 0.92 ± 0.015 g/100 g for the samples from the whole aerial plant, 0.75 ± 0.008 and 1.06 ± 0.005 g/100 g for the samples of leaves, and 1.22 ± 0.011 and 1.60 ± 0.049 g/100 g for the samples of flowers for HD and BiAD, respectively. The yield values for supercritical fluid extraction were of 0.94 ± 0.010 and 0.32 ± 0.007 g/100 g for the samples of whole aerial plant, 0.9 ± 0.010 and 1.14 ± 0.008 g/100 g for the samples of leaves, and 1.94 ± 0.030 and 0.57 ± 0.003 g/100 g for the samples of flowers, in the first and second stages, respectively. The main components of Lophanthus anisatus were identified as: estragon, limonene, eugenol, chavicol, benzaldehyde, and pentanol. The essential oil from Agatache foeniculum has antimicrobial effects against Staphylococcus aureus, the Escherichia coli and Pseudomonas aeruginosa. Acclimatization of Lophantus anisatus in Romania gives it special qualities by concentrating components such as: estragole over 93%, limonene over 8%, especially in flowers; and chavicol over 14%, estragole over 30%, eugenol and derivatives (methoxy eugenol, methyl eugenol, etc.) over 30% and phenyl ether alcohol over 20% in leaves. As a result of the research carried out, it was proven that Lophanthus anisatus can be used as a medicinal plant for many diseases, it can be used as a spice and preservative for various foods, etc.

Sustainable Extraction, Chemical Profile, Cytotoxic and Antileishmanial Activities In-Vitro of Some Citrus Species Leaves Essential Oils

Anti-leishmanial drugs extracted from natural sources have not been sufficiently explored in the literature. Until now, leishmaniasis treatments have been limited to synthetic and expensive drugs. This study investigated, for the first time, the anti-leishmanial efficacy of essential oils (EOs) from the leaves of Citrus species (C. sinensis, C. limon, and C. clementina). Essential oils were extracted from three species by solvent free microwave extraction (SFME); in addition, lemon oil was also isolated by hydro-distillation (HD). These were investigated using gas chromatography coupled with mass spectrometry (GC-MS) and evaluated against Leishmania species, namely Leishmania major and Leishmania infantum, using a mitochondrial tetrazolium test (MTT) assay. The chemical compositions of Citrus limon EOs obtained by HD and SFME showed some differences. The identified peaks of C. limon (SFME) represented 93.96%, where linalool was the major peak (44.21%), followed by sabinene (14.22%) and ocimene (6.09%). While the hydro-distilled oil of C. limon contained geranial (30.08%), limonene (27.09%), and neral (22.87%) in the identified peaks (96.67%). The identified components of C. clementina leaves oil (68.54%) showed twenty-six compounds, where the predominant compound was geranial (42.40%), followed by neral (26.79%) and limonene (14.48%). However, 89.82% C. sinensis oil was identified, where the major peaks were for neral (27.52%), linalool (25.83%), and geranial (23.44%). HD oil of lemon showed the highest activity against L. major, with moderate toxicity on murine macrophage (RAW 264.7) cells, and possessed the best selectivity index on both Leishmanial species (SI: 3.68; 6.38), followed by C. clementina oil and C. limon using SFME (0.9 ± 0.29, 1.03 ± 0.27, and 1.13 ± 0.3), respectively. C. clementina oil induced the greatest activity on Leishmania infantum, followed by HD lemon and SFME lemon oils (0.32 ± 0.18, 0.52 ± 0.15, and 0.57 ± 0.09, respectively) when compared to Amphotericin B (0.80 ± 0.18 and 0.23 ± 0.13) as a positive control, on both species, respectively. Our study suggests a potent anti-leishmanial activity of lemon oil (HD) on L. major, followed by C. clementina. With the same potency on L. infantum shown by C. clementina oil, followed by HD lemon oil. This effect could be attributed to the major compounds of limonene, citral, and neral, as well as the synergistic effect of other different compounds. These observations could be a starting point for the building of new anti-leishmanial drugs from natural origins, and which combine different EOs containing Citrus cultivars.

Extraction of High-Value Chemicals from Plants for Technical and Medical Applications

Plants produce a variety of high-value chemicals (e.g., secondary metabolites) which have a plethora of biological activities, which may be utilised in many facets of industry (e.g., agrisciences, cosmetics, drugs, neutraceuticals, household products, etc.). Exposure to various different environments, as well as their treatment (e.g., exposure to chemicals), can influence the chemical makeup of these plants and, in turn, which chemicals will be prevalent within them. Essential oils (EOs) usually have complex compositions (>300 organic compounds, e.g., alkaloids, flavonoids, phenolic acids, saponins and terpenes) and are obtained from botanically defined plant raw materials by dry/steam distillation or a suitable mechanical process (without heating). In certain cases, an antioxidant may be added to the EO (EOs are produced by more than 17,500 species of plants, but only ca. 250 EOs are commercially available). The interesting bioactivity of the chemicals produced by plants renders them high in value, motivating investment in their production, extraction and analysis. Traditional methods for effectively extracting plant-derived biomolecules include cold pressing and hydro/steam distillation; newer methods include solvent/Soxhlet extractions and sustainable processes that reduce waste, decrease processing times and deliver competitive yields, examples of which include microwave-assisted extraction (MAE), ultrasound-assisted extraction (UAE), subcritical water extraction (SWE) and supercritical CO2 extraction (scCO2). Once extracted, analytical techniques such as chromatography and mass spectrometry may be used to analyse the contents of the high-value extracts within a given feedstock. The bioactive components, which can be used in a variety of formulations and products (e.g., displaying anti-aging, antibacterial, anticancer, anti-depressive, antifungal, anti-inflammatory, antioxidant, antiparasitic, antiviral and anti-stress properties), are biorenewable high-value chemicals.

The Chemical Composition and Biological Activities of Essential Oil from Korean Native Thyme Bak-Ri-Hyang (Thymus quinquecostatus Celak.)

Thymus quinquecostatus Celak. (Korean name: bak-ri-hyang) is an important medicinal and aromatic herb in Korea, which is named for the spread of its fragrance over a distance of approximately 40 km. In traditional Korean systems of medicine, T. quinquecostatus has been used to treat cancer, constipation, hepatic disease, arteriosclerosis, poor circulation in women, constipation, and menstrual irregularities. At present, T. quinquecostatus is used only for ornamental and ground cover purposes. A literature search was conducted to retrieve information regarding the essential oil composition and biological properties of T. quinquecostatus from PubMed, Science Direct, Wiley, Springer, Taylor and Francis, Wiley, and other literature databases. T. quinquecostatus can be divided into different chemotypes, such as γ-terpinene, thymol, phenol, carvacrol, and geraniol, according to the presence of major components in its essential oil. Further, the essential oil from T. quinquecostatus has been reported to possess various therapeutic properties such as antioxidant, antimicrobial, anticancer, anti-inflammatory, analgesic, sleep prolonging, soothing, skin protection and whitening, anti-aging, anti-obesity, and anti-acne properties. In conclusion, this review will be helpful for utilizing the T. quinquecostatus plant in different industries including food, pharmaceuticals, pesticides, perfumery, and cosmetics.

Dynamic performance of optimized microwave assisted extraction to obtain Eucalyptus essential oil: energy requirements and environmental impact

The dynamic performance of a microwave-assisted extraction (MAE) was studied during the extraction of eucalyptus essential oil. The effect of different process variables such as solid/liquid ratio (1:1, 1:3, or 1:5), stirring speed (0, 200, or 400 rpm), and power microwave output (360, 450, or 540 W) on obtained yield, energy requirements and environmental impact were assessed. The maximum yield was 1.26 ± 0.01% and the steam generation velocities between 4.8 and 8.8 g/min favor the extraction. In terms of environmental impact, the lowest EI99 value obtained was 6.93 ± 0.1 mPT/g. A multi-response optimization was performed to identify the operating conditions that maximize yield, while minimize energy requirements and environmental impact. Temperature dynamics and extraction kinetics were fitted to a second-order transfer function model, aimed to evaluate the role of heating patterns on the process performance. Finally, a controlled temperature experiment was carried out under the optimal conditions.

Microwave-Assisted Extraction of Phenolic Compounds from Spent Coffee Grounds. Process Optimization Applying Design of Experiments

In this study, sustainable technology microwave-assisted extraction (MAE) in association with green solvents was applied to recover phenolic compounds from spent coffee grounds (SCGs). A design of experiments (DOE) was used for process optimization. Initially, a 2⁴⁻¹ two level Fractional Factorial Design was used and ratios “solvent to solute” and “ethanol to water” were identified as the significant experimental factors. Consequently, Central Composite Design (CCD) was applied to analyze the effects of the significant variables on the response yield, total polyphenols content (TPC), and antioxidant activity (AA) by the DPPH assay method, and quadratic surfaces to optimize those responses were generated. The values of the significant factors of 16.7 (solvent/solute) and 68.9% (ethanol/water) were optimized simultaneously the yield (%) at 6.98 ± 0.27, TPC (mg GAE/g) at 117.7 ± 6.1, and AA (µmol TE/g) at 143.8 ± 8.6 and were in excellent agreement with those predicted from the CCD model. The variations of the compositions of the lipids, caffeine, pentacyclic diterpenes, and FAME as a function of the dominant factor % ethanol in the solvent mixture were analyzed by applying NMR and GC-FID, and the results obtained confirmed their determinative significance.

Synergistic Antioxidant and Antibacterial Advantages of Essential Oils for Food Packaging Applications

The development of food-borne and infectious diseases has increased globally at an anomalous rate and is combined with emerging social and economic problems. This highlights the need for new and improved antibacterial agents with novel and different mechanisms of action at regular intervals. Some chemical or artificial food additives are considered harmful if they are used beyond their permissible levels. Today, consumers are demanding alternative, green, safer, and natural food additives to increase the shelf life of food. Essential oils (EOs) are concentrated liquid mixtures of volatile compounds with antioxidant and antibacterial properties that can be used as natural, eco-friendly, renewable, and cost-effective additives. The use of combinations of different EOs and their components is a promising strategy to increase the synergistic and additive effects of EOs in foods. In this article, we review the recent literature on EOs concerning the chemical constituents, extraction methods, antioxidant and antibacterial activities, and their mechanisms of action. Additionally, we discuss the synergistic interaction of different EOs and their components, challenges, and future directions of EOs as natural food preservatives, with special emphasis on shelf life extension and applications in the packaging of food products.

The application of essential oils as a next-generation of pesticides: recent developments and future perspectives

The overuse of synthetic pesticide, a consequence of the rush to increase crop production, led to tremendous adverse effects, as they constitute a major pollutant for both soils and water, with a high toxicity towards humans and animals and, at the same time, led to development of pest resistance. In the last period, the researches were directed towards finding new solutions with a lower toxicity, less damaging behaviour towards the environment, and a better specificity of action. In this context, the use of essential oils, a complex and unique mixture of compounds, can be considered for the next-generation pesticides. This review aims to present the main applications of the essential oils as insecticides, herbicides, acaricides, and nematicides, as they emerged from the scientific literature published in the last 5 years (2015 to present). From the identified articles within the time period, only those dealing with essential oils obtained by the authors (not commercially available) were selected to be inserted in the review, characterized using established analytical techniques and employed for the envisaged applications. The review is concluded with a chapter containing the main conclusions of the literature study and the future perspectives, regarding the application of essential oils as next-generation pesticides.

Curcuma longa L. Rhizome Essential Oil from Extraction to Its Agri-Food Applications. A Review

Curcuma longa L. rhizome essential oil is a valuable product in pharmaceutical industry due to its wide beneficial health effects. Novel applications in the agri-food industry where more sustainable extraction processes are required currently and safer substances are claimed for the consumer are being investigated. This review provides information regarding the conventional and recent extraction methods of C. longa rhizome oil, their characteristics and suitability to be applied at the industrial scale. In addition, variations in the chemical composition of C. longa rhizome and leaf essential oils regarding intrinsic and extrinsic factors and extraction methods are also analysed in order to select the most proper to obtain the most efficient activity. Finally, the potential applications of C. longa rhizome oil in the agri-food industry, such as antimicrobial, weedicide and a food preservative agent, are included. Regarding the data, C. longa rhizome essential oil may play a special role in the agri-food industry; however, further research to determine the application threshold so as not to damage crops or affect the organoleptic properties of food products, as well as efficient encapsulation techniques, are necessary for its implementation in global agriculture.

Extraction of Essential Oils from Medicinal Plants and their Utilization as Food Antioxidants

BACKGROUND

The use of essential oils is receiving increasing attention worldwide, as these oils are good sources of several bioactive compounds. Nowadays essential oils are preferred over synthetic preservatives thanks to their antioxidant and antimicrobial properties. Several studies highlight the beneficial effect of essential oils extracted from medicinal plants to cure human diseases such as hypertension, diabetes, or obesity. However, to preserve their bioactivity, the use of appropriate extraction technologies is required.

METHODS

The present review aims to describe the studies published so far on the essential oils focusing on their sources and chemical composition, the technologies used for their recovery and their application as antioxidants in food products.

RESULTS

The review has been structured in three parts. In the first part, the main compounds present in essential oils extracted from medicinal plants have been listed and described. In the second part, the most important technologies used for extraction and distillation, have been presented. In detail, conventional methods have been described and compared with innovative and green technologies. Finally, in the last part, the studies related to the application of essential oils as antioxidants in food products have been reviewed and the main findings discussed in detail.

CONCLUSION

In summary, an overview of the aforementioned subjects is presented by discussing the results of the most recent published studies.

Process Optimization of Microwave Assisted Simultaneous Distillation and Extraction from Siam cardamom using Response Surface Methodology

The main goal of the research was to optimize microwave-assisted simultaneous distillation and extraction (MA-SDE) using response surface methodology (RSM), based on Box–Behnken design (BBD). A process was designed to extract the essential oil from the leaf sheath of Siam cardamom. The experimental data were fitted to quadratic equations, and the experiment conditions for optimal extraction of 1,8-cineole were extraction time 87.68 min, material-to-water ratio 1:13.18 g/mL and microwave power 217.77 W. Under such conditions, the content of 1,8-cineole was 157.23 ± 4.23 µg/g, which matched with the predicted value. GC–MS results indicated the presence of predominant oxygenated monoterpenes including 1,8-cineole (20.63%), iso-carveol (14.30%), cis-p-mentha-1(7),8-dien-2-ol (12.27%) and trans-p-2,8-menthadien-1-ol (9.66%), and oxygenated contents were slightly higher in the MA-SDE and extraction compared to usual SDE. In addition, the essential oil extracted by MA-SDE exhibited strong antibacterial effects against the tested Gram-positive bacteria. Scanning electron micrographs provided more evidence of destruction of the leaf sheath treated by MA-SDE. Conclusively, microwave-assisted simultaneous distillation and solvent extraction appear to be an effective technique for the separation of essential oils enriched 1,8-cineole from Siam cardamom leaf sheath in a shorter time.

Conventional and Emerging Extraction Processes of Flavonoids

Flavonoids are a group of plant constituents called phenolic compounds and correspond to the nonenergy part of the human diet. Flavonoids are found in vegetables, seeds, fruits, and beverages such as wine and beer. Over 7000 flavonoids have been identified and they have been considered substances with a beneficial action on human health, particularly of multiple positive effects because of their antioxidant and free radical scavenging action. Although several studies indicate that some flavonoids have provident actions, they occur only at high doses, confirming in most investigations the existence of anti-inflammatory effects, antiviral or anti-allergic, and their protective role against cardiovascular disease, cancer, and various pathologies. Flavonoids are generally removed by chemical methods using solvents and traditional processes, which besides being expensive, involve long periods of time and affect the bioactivity of such compounds. Recently, efforts to develop biotechnological strategies to reduce or eliminate the use of toxic solvents have been reported, reducing processing time and maintaining the bioactivity of the compounds. In this paper, we review, analyze, and discuss methodologies for biotechnological recovery/extraction of flavonoids from agro-industrial residues, describing the advances and challenges in the topic.

Identification and Quantification of β-Sitosterol β-d-Glucoside of an Ethanolic Extract Obtained by Microwave-Assisted Extraction from Agave angustifolia Haw

β-sitosterol β-d-glucoside (BSSG) was extracted from “piña” of the Agave angustifolia Haw plant by microwave-assisted extraction (MAE) with a KOH solution such as a catalyst and a conventional maceration method to determine the best technique in terms of yield, extraction time, and recovery. The quantification and characterization of BSSG were done by high-performance thin layer chromatography (HPTLC), Fourier-transform infrared spectroscopy (FT-IR), and high-performance liquid chromatography−electrospray ionization−mass spectrometry (HPLC-ESI-MS). With an extraction time of 5 s by MAE, a higher amount of BSSG (124.76 mg of β-sitosterol β-d-glucoside/g dry weight of the extract) than those for MAE extraction times of 10 and 15 s (106.19 and 103.97 mg/g dry weight respectively) was shown. The quantification of BSSG in the extract obtained by 48 h of conventional maceration was about 4–5 times less (26.67 mg/g dry weight of the extract) than the yields reached by the MAE treatments. MAE achieved the highest amount of BSSG, in the shortest extraction time while preserving the integrity of the compound’s structure.

Optimization of Microwave-Assisted Extraction of Essential Oil from Vietnamese Basil (Ocimum basilicum L.) Using Response Surface Methodology

Basil plant is a common source for linalool and estragole. However, it has been showed that the chemical composition of basil varies considerably depending on many factors including method of extraction, cultivar of the plant or geographical location. In this study, we attempted to extract essential oil from Vietnamese basil and analyze the chemical composition of the obtained oil using gas chromatography–mass spectrometry (GC-MS). The extraction method of choice was microwave-assisted hydro-distillation (MAHD) and the process was optimized with Response Surface Methodology (RSM) with regard to four experimental parameters including raw material size, raw material to water ratio, extraction time and microwave power. The results showed that ground basil leaves, when extracted with optimal conditions of water-to-material ratio of 3.2:1, extraction time of 97 (min) and microwave power of 430 (W), gave the actual essential oil yield of 0.6%. Regarding ANOVA results of the quadratic model, high determination coefficient (R2 = 0.9077), significant F-value of 10.92 and the p-value of less than 0.05 indicate that this model is significant between experimental and predicted variables, and should be fixed. In addition, GC-MS analysis revealed that major components of Vietnamese Basil were Estragole (87.869%), α-Bergamotene (2.922%), τ-Cadinol (2.770%), and Linalool (1.347%).

Effects of microwave-assisted hot water treatments designed against Mexican fruit fly (Anastrepha ludens) on grapefruit (Citrus paradisi) quality

BACKGROUND

Hot water treatment (HWT) against Anastrepha ludens was developed achieving 48 °C in the core of grapefruits and holding it for 6 min. After heating, the grapefruits were hydro-cooled and stored at 23 °C and analyzed for 16 days. The effect of microwave-assisted HWT (MW-HWT) on grapefruit quality was analyzed and compared with the quality of fruits treated with HWT and control fruits (without treatment). The physicochemical properties and chemical composition of essential oil were analyzed.

RESULTS

MW-HWT was equivalent to HWT according to accumulated heat calculations, with the advantage of being shorter. Treatments significantly affected the weight, color, maturity index, juice content, firmness, titratable acidity, pH, and ascorbic acid content of the grapefruits (P < 0.05), but had no effect on the total soluble solids (P > 0.05). The major components identified in the essential oil were d-limonene and β-myrcene, compounds responsible of the scent of the grapefruits.

CONCLUSION

MW-HWT was shorter (130 min) and had a lesser effect on the quality of the grapefruit when compared with fruits under HWT (188 min duration). Thus, this treatment could be considered as an alternative method against the Mexican fruit fly in grapefruit. © 2017 Society of Chemical Industry.

Essential oils as natural additives to prevent oxidation reactions in meat and meat products: A review

Oxidation reactions during manufacturing, distribution, and storage of meat and meat products result in undesirable physicochemical changes and aromas, which leads to detrimental effects on the product quality. This could be translated into the consumer dissatisfaction and economic loss. One of the most common practices to overcome this issue is the incorporation of synthetic antioxidants. However, the increasing health-consciousness of consumers and their preference for natural additives leads to the search of natural alternatives to synthetic antioxidants. A number of essential oils have strong antioxidant properties and are explored as potential alternatives to chemical antioxidants in the meat industry. These compounds are classified as Generally Recognized as Safe (GRAS), and their application single or combined with other essential oils, ingredients or preservation technologies have beneficial effects on meat products. Their activity depends on several parameters including their concentrations, their possible synergistic effects, and the extraction method used to obtain them. Although steam distillation is the most common industrial technique for essential oils extraction, novel technologies have been emerged to address the drawbacks of the traditional extraction method and to obtain high-quality essential oils. This paper provides an overview of the application of essential oils as potential substitutes for synthetic antioxidants in the meat industry, exploring their mechanism of action against oxidation reactions, and the effect of extraction methods on their effectiveness.

Innovative "Green" and Novel Strategies for the Extraction of Bioactive Added Value Compounds from Citrus Wastes-A Review

Citrus is a major processed crop that results in large quantities of wastes and by-products rich in various bioactive compounds such as pectins, water soluble and insoluble antioxidants and essential oils. While some of those wastes are currently valorised by various technologies (yet most are discarded or used for feed), effective, non-toxic and profitable extraction strategies could further significantly promote the valorisation and provide both increased profits and high quality bioactives. The present review will describe and summarize the latest works concerning novel and greener methods for valorisation of citrus by-products. The outcomes and effectiveness of those technologies such as microwaves, ultrasound, pulsed electric fields and high pressure is compared both to conventional valorisation technologies and between the novel technologies themselves in order to highlight the advantages and potential scalability of these so-called "enabling technologies". In many cases the reported novel technologies can enable a valorisation extraction process that is "greener" compared to the conventional technique due to a lower energy consumption and reduced utilization of toxic solvents.

The Importance of Method Selection in Determining Product Integrity for Nutrition Research

The American Herbal Products Association estimates that there as many as 3000 plant species in commerce. The FDA estimates that there are about 85,000 dietary supplement products in the marketplace. The pace of product innovation far exceeds that of analytical methods development and validation, with new ingredients, matrixes, and combinations resulting in an analytical community that has been unable to keep up. This has led to a lack of validated analytical methods for dietary supplements and to inappropriate method selection where methods do exist. Only after rigorous validation procedures to ensure that methods are fit for purpose should they be used in a routine setting to verify product authenticity and quality. By following systematic procedures and establishing performance requirements for analytical methods before method development and validation, methods can be developed that are both valid and fit for purpose. This review summarizes advances in method selection, development, and validation regarding herbal supplement analysis and provides several documented examples of inappropriate method selection and application.

Impact of Microwave Treatment on Chemical Constituents in Fresh Rhizoma Gastrodiae (Tianma) by UPLC-MS Analysis

Fresh Rhizoma Gastrodiae (Tianma) was processed in a microwave oven at 2450 MHz in order to study the effect on the main chemical component changes taking place during microwave treatment. It was found that microwave affected the chemical composition of Tianma. Seven compounds, including gastrodin, gastrodigenin (p-hydroxybenzylalcohol), p-hydroxybenzaldehyde, vanillyl alcohol, vanillin, adenine, and 5-hydroxymethylfurfural, were identified in this study. As major active compounds, the contents of gastrodin and gastrodigenin in MWT Tianma were both twice as much as those in raw Tianma. Besides, the MS data show that there are still some unidentified compositions in Tianma, and there are also many converted compounds in MWT Tianma, which is worthy of further work. The results have indicated that microwave treated fresh Tianma might be helpful in designing the processing of traditional Chinese medicine and the application of microwave technology in traditional Chinese medicine needs to be researched further in the future.

A brief understanding of process optimisation in microwave-assisted extraction of botanical materials: options and opportunities with chemometric tools

INTRODUCTION

Extraction forms the very basic step in research on natural products for drug discovery. A poorly optimised and planned extraction methodology can jeopardise the entire mission.

OBJECTIVE

To provide a vivid picture of different chemometric tools and planning for process optimisation and method development in extraction of botanical material, with emphasis on microwave-assisted extraction (MAE) of botanical material.

METHODS

A review of studies involving the application of chemometric tools in combination with MAE of botanical materials was undertaken in order to discover what the significant extraction factors were. Optimising a response by fine-tuning those factors, experimental design or statistical design of experiment (DoE), which is a core area of study in chemometrics, was then used for statistical analysis and interpretations.

RESULTS

In this review a brief explanation of the different aspects and methodologies related to MAE of botanical materials that were subjected to experimental design, along with some general chemometric tools and the steps involved in the practice of MAE, are presented. A detailed study on various factors and responses involved in the optimisation is also presented.

CONCLUSION

This article will assist in obtaining a better insight into the chemometric strategies of process optimisation and method development, which will in turn improve the decision-making process in selecting influential extraction parameters.